mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-04 20:26:40 +07:00
487881c09b
Always use CS0 shadow area for NOR flash instead of regular CS0 memory area on Mackerel. When booting from CS0 NOR Flash the regular CS0 memory area is available, but when booting via USB the MASK ROM gets mapped to 0x0 which gets in the way for the NOR Flash. Always using CS0 shadow area works well for both NOR Flash boot and USB boot. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
1638 lines
39 KiB
C
1638 lines
39 KiB
C
/*
|
|
* mackerel board support
|
|
*
|
|
* Copyright (C) 2010 Renesas Solutions Corp.
|
|
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
|
|
*
|
|
* based on ap4evb
|
|
* Copyright (C) 2010 Magnus Damm
|
|
* Copyright (C) 2008 Yoshihiro Shimoda
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/input.h>
|
|
#include <linux/io.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/mfd/tmio.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/sh_mmcif.h>
|
|
#include <linux/mmc/sh_mobile_sdhi.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/pm_clock.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/sh_intc.h>
|
|
#include <linux/tca6416_keypad.h>
|
|
#include <linux/usb/r8a66597.h>
|
|
#include <linux/usb/renesas_usbhs.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <video/sh_mobile_hdmi.h>
|
|
#include <video/sh_mobile_lcdc.h>
|
|
#include <media/sh_mobile_ceu.h>
|
|
#include <media/soc_camera.h>
|
|
#include <media/soc_camera_platform.h>
|
|
#include <sound/sh_fsi.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/sh7372.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
/*
|
|
* Address Interface BusWidth note
|
|
* ------------------------------------------------------------------
|
|
* 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON
|
|
* 0x0800_0000 user area -
|
|
* 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF
|
|
* 0x1400_0000 Ether (LAN9220) 16bit
|
|
* 0x1600_0000 user area - cannot use with NAND
|
|
* 0x1800_0000 user area -
|
|
* 0x1A00_0000 -
|
|
* 0x4000_0000 LPDDR2-SDRAM (POP) 32bit
|
|
*/
|
|
|
|
/*
|
|
* CPU mode
|
|
*
|
|
* SW4 | Boot Area| Master | Remarks
|
|
* 1 | 2 | 3 | 4 | 5 | 6 | 8 | | Processor|
|
|
* ----+-----+-----+-----+-----+-----+-----+----------+----------+--------------
|
|
* ON | ON | OFF | ON | ON | OFF | OFF | External | System | External ROM
|
|
* ON | ON | ON | ON | ON | OFF | OFF | External | System | ROM Debug
|
|
* ON | ON | X | ON | OFF | OFF | OFF | Built-in | System | ROM Debug
|
|
* X | OFF | X | X | X | X | OFF | Built-in | System | MaskROM
|
|
* OFF | X | X | X | X | X | OFF | Built-in | System | MaskROM
|
|
* X | X | X | OFF | X | X | OFF | Built-in | System | MaskROM
|
|
* OFF | ON | OFF | X | X | OFF | ON | External | System | Standalone
|
|
* ON | OFF | OFF | X | X | OFF | ON | External | Realtime | Standalone
|
|
*/
|
|
|
|
/*
|
|
* NOR Flash ROM
|
|
*
|
|
* SW1 | SW2 | SW7 | NOR Flash ROM
|
|
* bit1 | bit1 bit2 | bit1 | Memory allocation
|
|
* ------+------------+------+------------------
|
|
* OFF | ON OFF | ON | Area 0
|
|
* OFF | ON OFF | OFF | Area 4
|
|
*/
|
|
|
|
/*
|
|
* SMSC 9220
|
|
*
|
|
* SW1 SMSC 9220
|
|
* -----------------------
|
|
* ON access disable
|
|
* OFF access enable
|
|
*/
|
|
|
|
/*
|
|
* NAND Flash ROM
|
|
*
|
|
* SW1 | SW2 | SW7 | NAND Flash ROM
|
|
* bit1 | bit1 bit2 | bit2 | Memory allocation
|
|
* ------+------------+------+------------------
|
|
* OFF | ON OFF | ON | FCE 0
|
|
* OFF | ON OFF | OFF | FCE 1
|
|
*/
|
|
|
|
/*
|
|
* External interrupt pin settings
|
|
*
|
|
* IRQX | pin setting | device | level
|
|
* ------+--------------------+--------------------+-------
|
|
* IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low
|
|
* IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High
|
|
* IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low
|
|
* IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low
|
|
* IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low
|
|
* IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High
|
|
* IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975) | High
|
|
*/
|
|
|
|
/*
|
|
* USB
|
|
*
|
|
* USB0 : CN22 : Function
|
|
* USB1 : CN31 : Function/Host *1
|
|
*
|
|
* J30 (for CN31) *1
|
|
* ----------+---------------+-------------
|
|
* 1-2 short | VBUS 5V | Host
|
|
* open | external VBUS | Function
|
|
*
|
|
* *1
|
|
* CN31 is used as
|
|
* CONFIG_USB_R8A66597_HCD Host
|
|
* CONFIG_USB_RENESAS_USBHS Function
|
|
*
|
|
* CAUTION
|
|
*
|
|
* renesas_usbhs driver can use external interrupt mode
|
|
* (which come from USB-PHY) or autonomy mode (it use own interrupt)
|
|
* for detecting connection/disconnection when Function.
|
|
* USB will be power OFF while it has been disconnecting
|
|
* if external interrupt mode, and it is always power ON if autonomy mode,
|
|
*
|
|
* mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
|
|
* because Touchscreen is using IRQ7-PORT40.
|
|
* It is impossible to use IRQ7 demux on this board.
|
|
*
|
|
* We can use external interrupt mode USB-Function on "USB1".
|
|
* USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
|
|
* But don't select both drivers in same time.
|
|
* These uses same IRQ number for request_irq(), and aren't supporting
|
|
* IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
|
|
*
|
|
* Actually these are old/new version of USB driver.
|
|
* This mean its register will be broken if it supports shared IRQ,
|
|
*/
|
|
|
|
/*
|
|
* SDHI0 (CN12)
|
|
*
|
|
* SW56 : OFF
|
|
*
|
|
*/
|
|
|
|
/* MMC /SDHI1 (CN7)
|
|
*
|
|
* I/O voltage : 1.8v
|
|
*
|
|
* Power voltage : 1.8v or 3.3v
|
|
* J22 : select power voltage *1
|
|
* 1-2 pin : 1.8v
|
|
* 2-3 pin : 3.3v
|
|
*
|
|
* *1
|
|
* Please change J22 depends the card to be used.
|
|
* MMC's OCR field set to support either voltage for the card inserted.
|
|
*
|
|
* SW1 | SW33
|
|
* | bit1 | bit2 | bit3 | bit4
|
|
* -------------+------+------+------+-------
|
|
* MMC0 OFF | OFF | X | ON | X (Use MMCIF)
|
|
* SDHI1 OFF | ON | X | OFF | X (Use MFD_SH_MOBILE_SDHI)
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* SDHI2 (CN23)
|
|
*
|
|
* microSD card sloct
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* FIXME !!
|
|
*
|
|
* gpio_no_direction
|
|
* gpio_pull_down
|
|
* are quick_hack.
|
|
*
|
|
* current gpio frame work doesn't have
|
|
* the method to control only pull up/down/free.
|
|
* this function should be replaced by correct gpio function
|
|
*/
|
|
static void __init gpio_no_direction(u32 addr)
|
|
{
|
|
__raw_writeb(0x00, addr);
|
|
}
|
|
|
|
static void __init gpio_pull_down(u32 addr)
|
|
{
|
|
u8 data = __raw_readb(addr);
|
|
|
|
data &= 0x0F;
|
|
data |= 0xA0;
|
|
|
|
__raw_writeb(data, addr);
|
|
}
|
|
|
|
/* MTD */
|
|
static struct mtd_partition nor_flash_partitions[] = {
|
|
{
|
|
.name = "loader",
|
|
.offset = 0x00000000,
|
|
.size = 512 * 1024,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "bootenv",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 512 * 1024,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "kernel_ro",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 8 * 1024 * 1024,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 8 * 1024 * 1024,
|
|
},
|
|
{
|
|
.name = "data",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data nor_flash_data = {
|
|
.width = 2,
|
|
.parts = nor_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(nor_flash_partitions),
|
|
};
|
|
|
|
static struct resource nor_flash_resources[] = {
|
|
[0] = {
|
|
.start = 0x20000000, /* CS0 shadow instead of regular CS0 */
|
|
.end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device nor_flash_device = {
|
|
.name = "physmap-flash",
|
|
.dev = {
|
|
.platform_data = &nor_flash_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(nor_flash_resources),
|
|
.resource = nor_flash_resources,
|
|
};
|
|
|
|
/* SMSC */
|
|
static struct resource smc911x_resources[] = {
|
|
{
|
|
.start = 0x14000000,
|
|
.end = 0x16000000 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = evt2irq(0x02c0) /* IRQ6A */,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
|
|
},
|
|
};
|
|
|
|
static struct smsc911x_platform_config smsc911x_info = {
|
|
.flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
};
|
|
|
|
static struct platform_device smc911x_device = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(smc911x_resources),
|
|
.resource = smc911x_resources,
|
|
.dev = {
|
|
.platform_data = &smsc911x_info,
|
|
},
|
|
};
|
|
|
|
/* MERAM */
|
|
static struct sh_mobile_meram_info mackerel_meram_info = {
|
|
.addr_mode = SH_MOBILE_MERAM_MODE1,
|
|
};
|
|
|
|
static struct resource meram_resources[] = {
|
|
[0] = {
|
|
.name = "MERAM",
|
|
.start = 0xe8000000,
|
|
.end = 0xe81fffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device meram_device = {
|
|
.name = "sh_mobile_meram",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(meram_resources),
|
|
.resource = meram_resources,
|
|
.dev = {
|
|
.platform_data = &mackerel_meram_info,
|
|
},
|
|
};
|
|
|
|
/* LCDC */
|
|
static struct fb_videomode mackerel_lcdc_modes[] = {
|
|
{
|
|
.name = "WVGA Panel",
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.left_margin = 220,
|
|
.right_margin = 110,
|
|
.hsync_len = 70,
|
|
.upper_margin = 20,
|
|
.lower_margin = 5,
|
|
.vsync_len = 5,
|
|
.sync = 0,
|
|
},
|
|
};
|
|
|
|
static int mackerel_set_brightness(void *board_data, int brightness)
|
|
{
|
|
gpio_set_value(GPIO_PORT31, brightness);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mackerel_get_brightness(void *board_data)
|
|
{
|
|
return gpio_get_value(GPIO_PORT31);
|
|
}
|
|
|
|
static struct sh_mobile_meram_cfg lcd_meram_cfg = {
|
|
.icb[0] = {
|
|
.marker_icb = 28,
|
|
.cache_icb = 24,
|
|
.meram_offset = 0x0,
|
|
.meram_size = 0x40,
|
|
},
|
|
.icb[1] = {
|
|
.marker_icb = 29,
|
|
.cache_icb = 25,
|
|
.meram_offset = 0x40,
|
|
.meram_size = 0x40,
|
|
},
|
|
};
|
|
|
|
static struct sh_mobile_lcdc_info lcdc_info = {
|
|
.meram_dev = &mackerel_meram_info,
|
|
.clock_source = LCDC_CLK_BUS,
|
|
.ch[0] = {
|
|
.chan = LCDC_CHAN_MAINLCD,
|
|
.bpp = 16,
|
|
.lcd_cfg = mackerel_lcdc_modes,
|
|
.num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
|
|
.interface_type = RGB24,
|
|
.clock_divider = 3,
|
|
.flags = 0,
|
|
.lcd_size_cfg.width = 152,
|
|
.lcd_size_cfg.height = 91,
|
|
.board_cfg = {
|
|
.set_brightness = mackerel_set_brightness,
|
|
.get_brightness = mackerel_get_brightness,
|
|
},
|
|
.bl_info = {
|
|
.name = "sh_mobile_lcdc_bl",
|
|
.max_brightness = 1,
|
|
},
|
|
.meram_cfg = &lcd_meram_cfg,
|
|
}
|
|
};
|
|
|
|
static struct resource lcdc_resources[] = {
|
|
[0] = {
|
|
.name = "LCDC",
|
|
.start = 0xfe940000,
|
|
.end = 0xfe943fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = intcs_evt2irq(0x580),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device lcdc_device = {
|
|
.name = "sh_mobile_lcdc_fb",
|
|
.num_resources = ARRAY_SIZE(lcdc_resources),
|
|
.resource = lcdc_resources,
|
|
.dev = {
|
|
.platform_data = &lcdc_info,
|
|
.coherent_dma_mask = ~0,
|
|
},
|
|
};
|
|
|
|
static struct sh_mobile_meram_cfg hdmi_meram_cfg = {
|
|
.icb[0] = {
|
|
.marker_icb = 30,
|
|
.cache_icb = 26,
|
|
.meram_offset = 0x80,
|
|
.meram_size = 0x100,
|
|
},
|
|
.icb[1] = {
|
|
.marker_icb = 31,
|
|
.cache_icb = 27,
|
|
.meram_offset = 0x180,
|
|
.meram_size = 0x100,
|
|
},
|
|
};
|
|
/* HDMI */
|
|
static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
|
|
.meram_dev = &mackerel_meram_info,
|
|
.clock_source = LCDC_CLK_EXTERNAL,
|
|
.ch[0] = {
|
|
.chan = LCDC_CHAN_MAINLCD,
|
|
.bpp = 16,
|
|
.interface_type = RGB24,
|
|
.clock_divider = 1,
|
|
.flags = LCDC_FLAGS_DWPOL,
|
|
.meram_cfg = &hdmi_meram_cfg,
|
|
}
|
|
};
|
|
|
|
static struct resource hdmi_lcdc_resources[] = {
|
|
[0] = {
|
|
.name = "LCDC1",
|
|
.start = 0xfe944000,
|
|
.end = 0xfe947fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = intcs_evt2irq(0x1780),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device hdmi_lcdc_device = {
|
|
.name = "sh_mobile_lcdc_fb",
|
|
.num_resources = ARRAY_SIZE(hdmi_lcdc_resources),
|
|
.resource = hdmi_lcdc_resources,
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &hdmi_lcdc_info,
|
|
.coherent_dma_mask = ~0,
|
|
},
|
|
};
|
|
|
|
static struct sh_mobile_hdmi_info hdmi_info = {
|
|
.lcd_chan = &hdmi_lcdc_info.ch[0],
|
|
.lcd_dev = &hdmi_lcdc_device.dev,
|
|
.flags = HDMI_SND_SRC_SPDIF,
|
|
};
|
|
|
|
static struct resource hdmi_resources[] = {
|
|
[0] = {
|
|
.name = "HDMI",
|
|
.start = 0xe6be0000,
|
|
.end = 0xe6be00ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
|
|
.start = evt2irq(0x17e0),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device hdmi_device = {
|
|
.name = "sh-mobile-hdmi",
|
|
.num_resources = ARRAY_SIZE(hdmi_resources),
|
|
.resource = hdmi_resources,
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &hdmi_info,
|
|
},
|
|
};
|
|
|
|
static struct platform_device fsi_hdmi_device = {
|
|
.name = "sh_fsi2_b_hdmi",
|
|
};
|
|
|
|
static void __init hdmi_init_pm_clock(void)
|
|
{
|
|
struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
|
|
int ret;
|
|
long rate;
|
|
|
|
if (IS_ERR(hdmi_ick)) {
|
|
ret = PTR_ERR(hdmi_ick);
|
|
pr_err("Cannot get HDMI ICK: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
|
|
if (ret < 0) {
|
|
pr_err("Cannot set PLLC2 parent: %d, %d users\n",
|
|
ret, sh7372_pllc2_clk.usecount);
|
|
goto out;
|
|
}
|
|
|
|
pr_debug("PLLC2 initial frequency %lu\n",
|
|
clk_get_rate(&sh7372_pllc2_clk));
|
|
|
|
rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
|
|
if (rate < 0) {
|
|
pr_err("Cannot get suitable rate: %ld\n", rate);
|
|
ret = rate;
|
|
goto out;
|
|
}
|
|
|
|
ret = clk_set_rate(&sh7372_pllc2_clk, rate);
|
|
if (ret < 0) {
|
|
pr_err("Cannot set rate %ld: %d\n", rate, ret);
|
|
goto out;
|
|
}
|
|
|
|
pr_debug("PLLC2 set frequency %lu\n", rate);
|
|
|
|
ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
|
|
if (ret < 0)
|
|
pr_err("Cannot set HDMI parent: %d\n", ret);
|
|
|
|
out:
|
|
if (!IS_ERR(hdmi_ick))
|
|
clk_put(hdmi_ick);
|
|
}
|
|
|
|
/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
|
|
*
|
|
* The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
|
|
* but on this particular board IRQ7 is already used by
|
|
* the touch screen. This leaves us with software polling.
|
|
*/
|
|
#define USBHS0_POLL_INTERVAL (HZ * 5)
|
|
|
|
struct usbhs_private {
|
|
unsigned int usbphyaddr;
|
|
unsigned int usbcrcaddr;
|
|
struct renesas_usbhs_platform_info info;
|
|
struct delayed_work work;
|
|
struct platform_device *pdev;
|
|
};
|
|
|
|
#define usbhs_get_priv(pdev) \
|
|
container_of(renesas_usbhs_get_info(pdev), \
|
|
struct usbhs_private, info)
|
|
|
|
#define usbhs_is_connected(priv) \
|
|
(!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
|
|
|
|
static int usbhs_get_vbus(struct platform_device *pdev)
|
|
{
|
|
return usbhs_is_connected(usbhs_get_priv(pdev));
|
|
}
|
|
|
|
static void usbhs_phy_reset(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
/* init phy */
|
|
__raw_writew(0x8a0a, priv->usbcrcaddr);
|
|
}
|
|
|
|
static int usbhs0_get_id(struct platform_device *pdev)
|
|
{
|
|
return USBHS_GADGET;
|
|
}
|
|
|
|
static void usbhs0_work_function(struct work_struct *work)
|
|
{
|
|
struct usbhs_private *priv = container_of(work, struct usbhs_private,
|
|
work.work);
|
|
|
|
renesas_usbhs_call_notify_hotplug(priv->pdev);
|
|
schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
|
|
}
|
|
|
|
static int usbhs0_hardware_init(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
priv->pdev = pdev;
|
|
INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
|
|
schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
|
|
return 0;
|
|
}
|
|
|
|
static void usbhs0_hardware_exit(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
cancel_delayed_work_sync(&priv->work);
|
|
}
|
|
|
|
static struct usbhs_private usbhs0_private = {
|
|
.usbcrcaddr = 0xe605810c, /* USBCR2 */
|
|
.info = {
|
|
.platform_callback = {
|
|
.hardware_init = usbhs0_hardware_init,
|
|
.hardware_exit = usbhs0_hardware_exit,
|
|
.phy_reset = usbhs_phy_reset,
|
|
.get_id = usbhs0_get_id,
|
|
.get_vbus = usbhs_get_vbus,
|
|
},
|
|
.driver_param = {
|
|
.buswait_bwait = 4,
|
|
.d0_tx_id = SHDMA_SLAVE_USB0_TX,
|
|
.d1_rx_id = SHDMA_SLAVE_USB0_RX,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct resource usbhs0_resources[] = {
|
|
[0] = {
|
|
.name = "USBHS0",
|
|
.start = 0xe6890000,
|
|
.end = 0xe68900e6 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x1ca0) /* USB0_USB0I0 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device usbhs0_device = {
|
|
.name = "renesas_usbhs",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &usbhs0_private.info,
|
|
},
|
|
.num_resources = ARRAY_SIZE(usbhs0_resources),
|
|
.resource = usbhs0_resources,
|
|
};
|
|
|
|
/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
|
|
*
|
|
* Use J30 to select between Host and Function. This setting
|
|
* can however not be detected by software. Hotplug of USBHS1
|
|
* is provided via IRQ8.
|
|
*/
|
|
#define IRQ8 evt2irq(0x0300)
|
|
|
|
/* USBHS1 USB Host support via r8a66597_hcd */
|
|
static void usb1_host_port_power(int port, int power)
|
|
{
|
|
if (!power) /* only power-on is supported for now */
|
|
return;
|
|
|
|
/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
|
|
__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
|
|
}
|
|
|
|
static struct r8a66597_platdata usb1_host_data = {
|
|
.on_chip = 1,
|
|
.port_power = usb1_host_port_power,
|
|
};
|
|
|
|
static struct resource usb1_host_resources[] = {
|
|
[0] = {
|
|
.name = "USBHS1",
|
|
.start = 0xe68b0000,
|
|
.end = 0xe68b00e6 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device usb1_host_device = {
|
|
.name = "r8a66597_hcd",
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = NULL, /* not use dma */
|
|
.coherent_dma_mask = 0xffffffff,
|
|
.platform_data = &usb1_host_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(usb1_host_resources),
|
|
.resource = usb1_host_resources,
|
|
};
|
|
|
|
/* USBHS1 USB Function support via renesas_usbhs */
|
|
|
|
#define USB_PHY_MODE (1 << 4)
|
|
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
|
|
#define USB_PHY_ON (1 << 1)
|
|
#define USB_PHY_OFF (1 << 0)
|
|
#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
|
|
|
|
static irqreturn_t usbhs1_interrupt(int irq, void *data)
|
|
{
|
|
struct platform_device *pdev = data;
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
dev_dbg(&pdev->dev, "%s\n", __func__);
|
|
|
|
renesas_usbhs_call_notify_hotplug(pdev);
|
|
|
|
/* clear status */
|
|
__raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR,
|
|
priv->usbphyaddr);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int usbhs1_hardware_init(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
int ret;
|
|
|
|
/* clear interrupt status */
|
|
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
|
|
|
|
ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
|
|
dev_name(&pdev->dev), pdev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "request_irq err\n");
|
|
return ret;
|
|
}
|
|
|
|
/* enable USB phy interrupt */
|
|
__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void usbhs1_hardware_exit(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
/* clear interrupt status */
|
|
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
|
|
|
|
free_irq(IRQ8, pdev);
|
|
}
|
|
|
|
static int usbhs1_get_id(struct platform_device *pdev)
|
|
{
|
|
return USBHS_GADGET;
|
|
}
|
|
|
|
static u32 usbhs1_pipe_cfg[] = {
|
|
USB_ENDPOINT_XFER_CONTROL,
|
|
USB_ENDPOINT_XFER_ISOC,
|
|
USB_ENDPOINT_XFER_ISOC,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
};
|
|
|
|
static struct usbhs_private usbhs1_private = {
|
|
.usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */
|
|
.usbcrcaddr = 0xe6058130, /* USBCR4 */
|
|
.info = {
|
|
.platform_callback = {
|
|
.hardware_init = usbhs1_hardware_init,
|
|
.hardware_exit = usbhs1_hardware_exit,
|
|
.get_id = usbhs1_get_id,
|
|
.phy_reset = usbhs_phy_reset,
|
|
.get_vbus = usbhs_get_vbus,
|
|
},
|
|
.driver_param = {
|
|
.buswait_bwait = 4,
|
|
.has_otg = 1,
|
|
.pipe_type = usbhs1_pipe_cfg,
|
|
.pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg),
|
|
.d0_tx_id = SHDMA_SLAVE_USB1_TX,
|
|
.d1_rx_id = SHDMA_SLAVE_USB1_RX,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct resource usbhs1_resources[] = {
|
|
[0] = {
|
|
.name = "USBHS1",
|
|
.start = 0xe68b0000,
|
|
.end = 0xe68b00e6 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device usbhs1_device = {
|
|
.name = "renesas_usbhs",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &usbhs1_private.info,
|
|
},
|
|
.num_resources = ARRAY_SIZE(usbhs1_resources),
|
|
.resource = usbhs1_resources,
|
|
};
|
|
|
|
/* LED */
|
|
static struct gpio_led mackerel_leds[] = {
|
|
{
|
|
.name = "led0",
|
|
.gpio = GPIO_PORT0,
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
},
|
|
{
|
|
.name = "led1",
|
|
.gpio = GPIO_PORT1,
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
},
|
|
{
|
|
.name = "led2",
|
|
.gpio = GPIO_PORT2,
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
},
|
|
{
|
|
.name = "led3",
|
|
.gpio = GPIO_PORT159,
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}
|
|
};
|
|
|
|
static struct gpio_led_platform_data mackerel_leds_pdata = {
|
|
.leds = mackerel_leds,
|
|
.num_leds = ARRAY_SIZE(mackerel_leds),
|
|
};
|
|
|
|
static struct platform_device leds_device = {
|
|
.name = "leds-gpio",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &mackerel_leds_pdata,
|
|
},
|
|
};
|
|
|
|
/* FSI */
|
|
#define IRQ_FSI evt2irq(0x1840)
|
|
static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
|
|
{
|
|
int ret;
|
|
|
|
if (rate <= 0)
|
|
return 0;
|
|
|
|
if (!enable) {
|
|
clk_disable(clk);
|
|
return 0;
|
|
}
|
|
|
|
ret = clk_set_rate(clk, clk_round_rate(clk, rate));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return clk_enable(clk);
|
|
}
|
|
|
|
static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
|
|
{
|
|
struct clk *fsib_clk;
|
|
struct clk *fdiv_clk = &sh7372_fsidivb_clk;
|
|
long fsib_rate = 0;
|
|
long fdiv_rate = 0;
|
|
int ackmd_bpfmd;
|
|
int ret;
|
|
|
|
/* FSIA is slave mode. nothing to do here */
|
|
if (is_porta)
|
|
return 0;
|
|
|
|
/* clock start */
|
|
switch (rate) {
|
|
case 44100:
|
|
fsib_rate = rate * 256;
|
|
ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
|
|
break;
|
|
case 48000:
|
|
fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
|
|
fdiv_rate = rate * 256;
|
|
ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
|
|
break;
|
|
default:
|
|
pr_err("unsupported rate in FSI2 port B\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* FSI B setting */
|
|
fsib_clk = clk_get(dev, "ickb");
|
|
if (IS_ERR(fsib_clk))
|
|
return -EIO;
|
|
|
|
/* fsib */
|
|
ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
|
|
if (ret < 0)
|
|
goto fsi_set_rate_end;
|
|
|
|
/* FSI DIV */
|
|
ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
|
|
if (ret < 0) {
|
|
/* disable FSI B */
|
|
if (enable)
|
|
__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
|
|
goto fsi_set_rate_end;
|
|
}
|
|
|
|
ret = ackmd_bpfmd;
|
|
|
|
fsi_set_rate_end:
|
|
clk_put(fsib_clk);
|
|
return ret;
|
|
}
|
|
|
|
static struct sh_fsi_platform_info fsi_info = {
|
|
.porta_flags = SH_FSI_BRS_INV,
|
|
|
|
.portb_flags = SH_FSI_BRS_INV |
|
|
SH_FSI_BRM_INV |
|
|
SH_FSI_LRS_INV |
|
|
SH_FSI_FMT_SPDIF,
|
|
|
|
.set_rate = fsi_set_rate,
|
|
};
|
|
|
|
static struct resource fsi_resources[] = {
|
|
[0] = {
|
|
.name = "FSI",
|
|
.start = 0xFE3C0000,
|
|
.end = 0xFE3C0400 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_FSI,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device fsi_device = {
|
|
.name = "sh_fsi2",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(fsi_resources),
|
|
.resource = fsi_resources,
|
|
.dev = {
|
|
.platform_data = &fsi_info,
|
|
},
|
|
};
|
|
|
|
static struct platform_device fsi_ak4643_device = {
|
|
.name = "sh_fsi2_a_ak4643",
|
|
};
|
|
|
|
/*
|
|
* The card detect pin of the top SD/MMC slot (CN7) is active low and is
|
|
* connected to GPIO A22 of SH7372 (GPIO_PORT41).
|
|
*/
|
|
static int slot_cn7_get_cd(struct platform_device *pdev)
|
|
{
|
|
return !gpio_get_value(GPIO_PORT41);
|
|
}
|
|
|
|
/* SDHI0 */
|
|
static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg)
|
|
{
|
|
struct device *dev = arg;
|
|
struct sh_mobile_sdhi_info *info = dev->platform_data;
|
|
struct tmio_mmc_data *pdata = info->pdata;
|
|
|
|
tmio_mmc_cd_wakeup(pdata);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct sh_mobile_sdhi_info sdhi0_info = {
|
|
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
|
|
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
|
|
};
|
|
|
|
static struct resource sdhi0_resources[] = {
|
|
[0] = {
|
|
.name = "SDHI0",
|
|
.start = 0xe6850000,
|
|
.end = 0xe68500ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[3] = {
|
|
.start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device sdhi0_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.num_resources = ARRAY_SIZE(sdhi0_resources),
|
|
.resource = sdhi0_resources,
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &sdhi0_info,
|
|
},
|
|
};
|
|
|
|
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
|
|
/* SDHI1 */
|
|
static struct sh_mobile_sdhi_info sdhi1_info = {
|
|
.dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
|
|
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
|
|
.tmio_ocr_mask = MMC_VDD_165_195,
|
|
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
|
MMC_CAP_NEEDS_POLL,
|
|
.get_cd = slot_cn7_get_cd,
|
|
};
|
|
|
|
static struct resource sdhi1_resources[] = {
|
|
[0] = {
|
|
.name = "SDHI1",
|
|
.start = 0xe6860000,
|
|
.end = 0xe68600ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
|
|
.start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
|
|
.start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[3] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_SDIO,
|
|
.start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device sdhi1_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.num_resources = ARRAY_SIZE(sdhi1_resources),
|
|
.resource = sdhi1_resources,
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &sdhi1_info,
|
|
},
|
|
};
|
|
#endif
|
|
|
|
/*
|
|
* The card detect pin of the top SD/MMC slot (CN23) is active low and is
|
|
* connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162).
|
|
*/
|
|
static int slot_cn23_get_cd(struct platform_device *pdev)
|
|
{
|
|
return !gpio_get_value(GPIO_PORT162);
|
|
}
|
|
|
|
/* SDHI2 */
|
|
static struct sh_mobile_sdhi_info sdhi2_info = {
|
|
.dma_slave_tx = SHDMA_SLAVE_SDHI2_TX,
|
|
.dma_slave_rx = SHDMA_SLAVE_SDHI2_RX,
|
|
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
|
MMC_CAP_NEEDS_POLL,
|
|
.get_cd = slot_cn23_get_cd,
|
|
};
|
|
|
|
static struct resource sdhi2_resources[] = {
|
|
[0] = {
|
|
.name = "SDHI2",
|
|
.start = 0xe6870000,
|
|
.end = 0xe68700ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
|
|
.start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
|
|
.start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[3] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_SDIO,
|
|
.start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device sdhi2_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.num_resources = ARRAY_SIZE(sdhi2_resources),
|
|
.resource = sdhi2_resources,
|
|
.id = 2,
|
|
.dev = {
|
|
.platform_data = &sdhi2_info,
|
|
},
|
|
};
|
|
|
|
/* SH_MMCIF */
|
|
static struct resource sh_mmcif_resources[] = {
|
|
[0] = {
|
|
.name = "MMCIF",
|
|
.start = 0xE6BD0000,
|
|
.end = 0xE6BD00FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
/* MMC ERR */
|
|
.start = evt2irq(0x1ac0),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
/* MMC NOR */
|
|
.start = evt2irq(0x1ae0),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct sh_mmcif_dma sh_mmcif_dma = {
|
|
.chan_priv_rx = {
|
|
.slave_id = SHDMA_SLAVE_MMCIF_RX,
|
|
},
|
|
.chan_priv_tx = {
|
|
.slave_id = SHDMA_SLAVE_MMCIF_TX,
|
|
},
|
|
};
|
|
|
|
static struct sh_mmcif_plat_data sh_mmcif_plat = {
|
|
.sup_pclk = 0,
|
|
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
|
|
.caps = MMC_CAP_4_BIT_DATA |
|
|
MMC_CAP_8_BIT_DATA |
|
|
MMC_CAP_NEEDS_POLL,
|
|
.get_cd = slot_cn7_get_cd,
|
|
.dma = &sh_mmcif_dma,
|
|
};
|
|
|
|
static struct platform_device sh_mmcif_device = {
|
|
.name = "sh_mmcif",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = NULL,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
.platform_data = &sh_mmcif_plat,
|
|
},
|
|
.num_resources = ARRAY_SIZE(sh_mmcif_resources),
|
|
.resource = sh_mmcif_resources,
|
|
};
|
|
|
|
|
|
static int mackerel_camera_add(struct soc_camera_device *icd);
|
|
static void mackerel_camera_del(struct soc_camera_device *icd);
|
|
|
|
static int camera_set_capture(struct soc_camera_platform_info *info,
|
|
int enable)
|
|
{
|
|
return 0; /* camera sensor always enabled */
|
|
}
|
|
|
|
static struct soc_camera_platform_info camera_info = {
|
|
.format_name = "UYVY",
|
|
.format_depth = 16,
|
|
.format = {
|
|
.code = V4L2_MBUS_FMT_UYVY8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_SMPTE170M,
|
|
.field = V4L2_FIELD_NONE,
|
|
.width = 640,
|
|
.height = 480,
|
|
},
|
|
.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
|
|
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
|
|
SOCAM_DATA_ACTIVE_HIGH,
|
|
.set_capture = camera_set_capture,
|
|
};
|
|
|
|
static struct soc_camera_link camera_link = {
|
|
.bus_id = 0,
|
|
.add_device = mackerel_camera_add,
|
|
.del_device = mackerel_camera_del,
|
|
.module_name = "soc_camera_platform",
|
|
.priv = &camera_info,
|
|
};
|
|
|
|
static struct platform_device *camera_device;
|
|
|
|
static void mackerel_camera_release(struct device *dev)
|
|
{
|
|
soc_camera_platform_release(&camera_device);
|
|
}
|
|
|
|
static int mackerel_camera_add(struct soc_camera_device *icd)
|
|
{
|
|
return soc_camera_platform_add(icd, &camera_device, &camera_link,
|
|
mackerel_camera_release, 0);
|
|
}
|
|
|
|
static void mackerel_camera_del(struct soc_camera_device *icd)
|
|
{
|
|
soc_camera_platform_del(icd, camera_device, &camera_link);
|
|
}
|
|
|
|
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
|
|
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
|
|
};
|
|
|
|
static struct resource ceu_resources[] = {
|
|
[0] = {
|
|
.name = "CEU",
|
|
.start = 0xfe910000,
|
|
.end = 0xfe91009f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = intcs_evt2irq(0x880),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
/* place holder for contiguous memory */
|
|
},
|
|
};
|
|
|
|
static struct platform_device ceu_device = {
|
|
.name = "sh_mobile_ceu",
|
|
.id = 0, /* "ceu0" clock */
|
|
.num_resources = ARRAY_SIZE(ceu_resources),
|
|
.resource = ceu_resources,
|
|
.dev = {
|
|
.platform_data = &sh_mobile_ceu_info,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
};
|
|
|
|
static struct platform_device mackerel_camera = {
|
|
.name = "soc-camera-pdrv",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &camera_link,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *mackerel_devices[] __initdata = {
|
|
&nor_flash_device,
|
|
&smc911x_device,
|
|
&lcdc_device,
|
|
&usb1_host_device,
|
|
&usbhs1_device,
|
|
&usbhs0_device,
|
|
&leds_device,
|
|
&fsi_device,
|
|
&fsi_ak4643_device,
|
|
&fsi_hdmi_device,
|
|
&sdhi0_device,
|
|
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
|
|
&sdhi1_device,
|
|
#endif
|
|
&sdhi2_device,
|
|
&sh_mmcif_device,
|
|
&ceu_device,
|
|
&mackerel_camera,
|
|
&hdmi_lcdc_device,
|
|
&hdmi_device,
|
|
&meram_device,
|
|
};
|
|
|
|
/* Keypad Initialization */
|
|
#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
|
|
{ \
|
|
.type = ev_type, \
|
|
.code = ev_code, \
|
|
.active_low = act_low, \
|
|
}
|
|
|
|
#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
|
|
|
|
static struct tca6416_button mackerel_gpio_keys[] = {
|
|
KEYPAD_BUTTON_LOW(KEY_HOME),
|
|
KEYPAD_BUTTON_LOW(KEY_MENU),
|
|
KEYPAD_BUTTON_LOW(KEY_BACK),
|
|
KEYPAD_BUTTON_LOW(KEY_POWER),
|
|
};
|
|
|
|
static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
|
|
.buttons = mackerel_gpio_keys,
|
|
.nbuttons = ARRAY_SIZE(mackerel_gpio_keys),
|
|
.rep = 1,
|
|
.use_polling = 0,
|
|
.pinmask = 0x000F,
|
|
};
|
|
|
|
/* I2C */
|
|
#define IRQ7 evt2irq(0x02e0)
|
|
#define IRQ9 evt2irq(0x0320)
|
|
|
|
static struct i2c_board_info i2c0_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("ak4643", 0x13),
|
|
},
|
|
/* Keypad */
|
|
{
|
|
I2C_BOARD_INFO("tca6408-keys", 0x20),
|
|
.platform_data = &mackerel_tca6416_keys_info,
|
|
.irq = IRQ9,
|
|
},
|
|
/* Touchscreen */
|
|
{
|
|
I2C_BOARD_INFO("st1232-ts", 0x55),
|
|
.irq = IRQ7,
|
|
},
|
|
};
|
|
|
|
#define IRQ21 evt2irq(0x32a0)
|
|
|
|
static struct i2c_board_info i2c1_devices[] = {
|
|
/* Accelerometer */
|
|
{
|
|
I2C_BOARD_INFO("adxl34x", 0x53),
|
|
.irq = IRQ21,
|
|
},
|
|
};
|
|
|
|
static struct map_desc mackerel_io_desc[] __initdata = {
|
|
/* create a 1:1 entity map for 0xe6xxxxxx
|
|
* used by CPGA, INTC and PFC.
|
|
*/
|
|
{
|
|
.virtual = 0xe6000000,
|
|
.pfn = __phys_to_pfn(0xe6000000),
|
|
.length = 256 << 20,
|
|
.type = MT_DEVICE_NONSHARED
|
|
},
|
|
};
|
|
|
|
static void __init mackerel_map_io(void)
|
|
{
|
|
iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
|
|
/* DMA memory at 0xf6000000 - 0xffdfffff */
|
|
init_consistent_dma_size(158 << 20);
|
|
|
|
/* setup early devices and console here as well */
|
|
sh7372_add_early_devices();
|
|
shmobile_setup_console();
|
|
}
|
|
|
|
#define GPIO_PORT9CR 0xE6051009
|
|
#define GPIO_PORT10CR 0xE605100A
|
|
#define GPIO_PORT167CR 0xE60520A7
|
|
#define GPIO_PORT168CR 0xE60520A8
|
|
#define SRCR4 0xe61580bc
|
|
#define USCCR1 0xE6058144
|
|
static void __init mackerel_init(void)
|
|
{
|
|
u32 srcr4;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
sh7372_pinmux_init();
|
|
|
|
/* enable SCIFA0 */
|
|
gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
|
|
gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
|
|
|
|
/* enable SMSC911X */
|
|
gpio_request(GPIO_FN_CS5A, NULL);
|
|
gpio_request(GPIO_FN_IRQ6_39, NULL);
|
|
|
|
/* LCDC */
|
|
gpio_request(GPIO_FN_LCDD23, NULL);
|
|
gpio_request(GPIO_FN_LCDD22, NULL);
|
|
gpio_request(GPIO_FN_LCDD21, NULL);
|
|
gpio_request(GPIO_FN_LCDD20, NULL);
|
|
gpio_request(GPIO_FN_LCDD19, NULL);
|
|
gpio_request(GPIO_FN_LCDD18, NULL);
|
|
gpio_request(GPIO_FN_LCDD17, NULL);
|
|
gpio_request(GPIO_FN_LCDD16, NULL);
|
|
gpio_request(GPIO_FN_LCDD15, NULL);
|
|
gpio_request(GPIO_FN_LCDD14, NULL);
|
|
gpio_request(GPIO_FN_LCDD13, NULL);
|
|
gpio_request(GPIO_FN_LCDD12, NULL);
|
|
gpio_request(GPIO_FN_LCDD11, NULL);
|
|
gpio_request(GPIO_FN_LCDD10, NULL);
|
|
gpio_request(GPIO_FN_LCDD9, NULL);
|
|
gpio_request(GPIO_FN_LCDD8, NULL);
|
|
gpio_request(GPIO_FN_LCDD7, NULL);
|
|
gpio_request(GPIO_FN_LCDD6, NULL);
|
|
gpio_request(GPIO_FN_LCDD5, NULL);
|
|
gpio_request(GPIO_FN_LCDD4, NULL);
|
|
gpio_request(GPIO_FN_LCDD3, NULL);
|
|
gpio_request(GPIO_FN_LCDD2, NULL);
|
|
gpio_request(GPIO_FN_LCDD1, NULL);
|
|
gpio_request(GPIO_FN_LCDD0, NULL);
|
|
gpio_request(GPIO_FN_LCDDISP, NULL);
|
|
gpio_request(GPIO_FN_LCDDCK, NULL);
|
|
|
|
gpio_request(GPIO_PORT31, NULL); /* backlight */
|
|
gpio_direction_output(GPIO_PORT31, 0); /* off by default */
|
|
|
|
gpio_request(GPIO_PORT151, NULL); /* LCDDON */
|
|
gpio_direction_output(GPIO_PORT151, 1);
|
|
|
|
/* USBHS0 */
|
|
gpio_request(GPIO_FN_VBUS0_0, NULL);
|
|
gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
|
|
|
|
/* USBHS1 */
|
|
gpio_request(GPIO_FN_VBUS0_1, NULL);
|
|
gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
|
|
gpio_request(GPIO_FN_IDIN_1_113, NULL);
|
|
|
|
/* USB phy tweak to make the r8a66597_hcd host driver work */
|
|
__raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
|
|
|
|
/* enable FSI2 port A (ak4643) */
|
|
gpio_request(GPIO_FN_FSIAIBT, NULL);
|
|
gpio_request(GPIO_FN_FSIAILR, NULL);
|
|
gpio_request(GPIO_FN_FSIAISLD, NULL);
|
|
gpio_request(GPIO_FN_FSIAOSLD, NULL);
|
|
gpio_request(GPIO_PORT161, NULL);
|
|
gpio_direction_output(GPIO_PORT161, 0); /* slave */
|
|
|
|
gpio_request(GPIO_PORT9, NULL);
|
|
gpio_request(GPIO_PORT10, NULL);
|
|
gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */
|
|
gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
|
|
|
|
intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
|
|
|
|
/* setup FSI2 port B (HDMI) */
|
|
gpio_request(GPIO_FN_FSIBCK, NULL);
|
|
__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
|
|
|
|
/* set SPU2 clock to 119.6 MHz */
|
|
clk = clk_get(NULL, "spu_clk");
|
|
if (!IS_ERR(clk)) {
|
|
clk_set_rate(clk, clk_round_rate(clk, 119600000));
|
|
clk_put(clk);
|
|
}
|
|
|
|
/* enable Keypad */
|
|
gpio_request(GPIO_FN_IRQ9_42, NULL);
|
|
irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
|
|
|
|
/* enable Touchscreen */
|
|
gpio_request(GPIO_FN_IRQ7_40, NULL);
|
|
irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
|
|
|
|
/* enable Accelerometer */
|
|
gpio_request(GPIO_FN_IRQ21, NULL);
|
|
irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
|
|
|
|
/* enable SDHI0 */
|
|
gpio_request(GPIO_FN_SDHICD0, NULL);
|
|
gpio_request(GPIO_FN_SDHIWP0, NULL);
|
|
gpio_request(GPIO_FN_SDHICMD0, NULL);
|
|
gpio_request(GPIO_FN_SDHICLK0, NULL);
|
|
gpio_request(GPIO_FN_SDHID0_3, NULL);
|
|
gpio_request(GPIO_FN_SDHID0_2, NULL);
|
|
gpio_request(GPIO_FN_SDHID0_1, NULL);
|
|
gpio_request(GPIO_FN_SDHID0_0, NULL);
|
|
|
|
ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd,
|
|
IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev);
|
|
if (!ret)
|
|
sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
|
|
else
|
|
pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret);
|
|
|
|
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
|
|
/* enable SDHI1 */
|
|
gpio_request(GPIO_FN_SDHICMD1, NULL);
|
|
gpio_request(GPIO_FN_SDHICLK1, NULL);
|
|
gpio_request(GPIO_FN_SDHID1_3, NULL);
|
|
gpio_request(GPIO_FN_SDHID1_2, NULL);
|
|
gpio_request(GPIO_FN_SDHID1_1, NULL);
|
|
gpio_request(GPIO_FN_SDHID1_0, NULL);
|
|
#endif
|
|
/* card detect pin for MMC slot (CN7) */
|
|
gpio_request(GPIO_PORT41, NULL);
|
|
gpio_direction_input(GPIO_PORT41);
|
|
|
|
/* enable SDHI2 */
|
|
gpio_request(GPIO_FN_SDHICMD2, NULL);
|
|
gpio_request(GPIO_FN_SDHICLK2, NULL);
|
|
gpio_request(GPIO_FN_SDHID2_3, NULL);
|
|
gpio_request(GPIO_FN_SDHID2_2, NULL);
|
|
gpio_request(GPIO_FN_SDHID2_1, NULL);
|
|
gpio_request(GPIO_FN_SDHID2_0, NULL);
|
|
|
|
/* card detect pin for microSD slot (CN23) */
|
|
gpio_request(GPIO_PORT162, NULL);
|
|
gpio_direction_input(GPIO_PORT162);
|
|
|
|
/* MMCIF */
|
|
gpio_request(GPIO_FN_MMCD0_0, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_1, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_2, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_3, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_4, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_5, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_6, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_7, NULL);
|
|
gpio_request(GPIO_FN_MMCCMD0, NULL);
|
|
gpio_request(GPIO_FN_MMCCLK0, NULL);
|
|
|
|
/* enable GPS module (GT-720F) */
|
|
gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
|
|
gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
|
|
|
|
/* CEU */
|
|
gpio_request(GPIO_FN_VIO_CLK, NULL);
|
|
gpio_request(GPIO_FN_VIO_VD, NULL);
|
|
gpio_request(GPIO_FN_VIO_HD, NULL);
|
|
gpio_request(GPIO_FN_VIO_FIELD, NULL);
|
|
gpio_request(GPIO_FN_VIO_CKO, NULL);
|
|
gpio_request(GPIO_FN_VIO_D7, NULL);
|
|
gpio_request(GPIO_FN_VIO_D6, NULL);
|
|
gpio_request(GPIO_FN_VIO_D5, NULL);
|
|
gpio_request(GPIO_FN_VIO_D4, NULL);
|
|
gpio_request(GPIO_FN_VIO_D3, NULL);
|
|
gpio_request(GPIO_FN_VIO_D2, NULL);
|
|
gpio_request(GPIO_FN_VIO_D1, NULL);
|
|
gpio_request(GPIO_FN_VIO_D0, NULL);
|
|
|
|
/* HDMI */
|
|
gpio_request(GPIO_FN_HDMI_HPD, NULL);
|
|
gpio_request(GPIO_FN_HDMI_CEC, NULL);
|
|
|
|
/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
|
|
srcr4 = __raw_readl(SRCR4);
|
|
__raw_writel(srcr4 | (1 << 13), SRCR4);
|
|
udelay(50);
|
|
__raw_writel(srcr4 & ~(1 << 13), SRCR4);
|
|
|
|
i2c_register_board_info(0, i2c0_devices,
|
|
ARRAY_SIZE(i2c0_devices));
|
|
i2c_register_board_info(1, i2c1_devices,
|
|
ARRAY_SIZE(i2c1_devices));
|
|
|
|
sh7372_add_standard_devices();
|
|
|
|
platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
|
|
|
|
sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
|
|
sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
|
|
sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device);
|
|
sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
|
|
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
|
|
#endif
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device);
|
|
sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device);
|
|
|
|
hdmi_init_pm_clock();
|
|
sh7372_pm_init();
|
|
pm_clk_add(&fsi_device.dev, "spu2");
|
|
pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
|
|
}
|
|
|
|
static void __init mackerel_timer_init(void)
|
|
{
|
|
sh7372_clock_init();
|
|
shmobile_timer.init();
|
|
|
|
/* External clock source */
|
|
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
|
|
}
|
|
|
|
static struct sys_timer mackerel_timer = {
|
|
.init = mackerel_timer_init,
|
|
};
|
|
|
|
MACHINE_START(MACKEREL, "mackerel")
|
|
.map_io = mackerel_map_io,
|
|
.init_irq = sh7372_init_irq,
|
|
.handle_irq = shmobile_handle_irq_intc,
|
|
.init_machine = mackerel_init,
|
|
.timer = &mackerel_timer,
|
|
MACHINE_END
|