mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 10:06:00 +07:00
bfee31f5bb
These are the bindings for 2 MFD devices used on some of the Keymile boards. The first one is the chassis managmenet bfticu FPGA. The second one is the board controller (reset, LEDs, GPIOs) QRIO CPDL. These FPGAs are used in the kmcoge4 board. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
26 lines
894 B
Plaintext
26 lines
894 B
Plaintext
KEYMILE bfticu Chassis Management FPGA
|
|
|
|
The bfticu is a multifunction device that manages the whole chassis.
|
|
Its main functionality is to collect IRQs from the whole chassis and signals
|
|
them to a single controller.
|
|
|
|
Required properties:
|
|
- compatible: "keymile,bfticu"
|
|
- interrupt-controller: the bfticu FPGA is an interrupt controller
|
|
- interrupts: the main IRQ line to signal the collected IRQs
|
|
- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant
|
|
of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
|
- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to
|
|
- reg: access on the parent local bus (chip select, offset in chip select, size)
|
|
|
|
Example:
|
|
|
|
chassis-mgmt@3,0 {
|
|
compatible = "keymile,bfticu";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <3 0 0x100>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <6 1 0 0>;
|
|
};
|