mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-03 05:46:42 +07:00
82c084f56a
BCM7xxx internal Gigabit PHY on 28nm process do not need anything
special to be done during suspend, remove the suspend callback since it
might be harmful rather than useful. While at it, update the comment
above bcm7xxx_suspend() to reflect that it applies only to 40nm and 65nm
process PHY devices.
Fixes: b560a58c45 ("net: phy: add Broadcom BCM7xxx internal PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@greenl8ke.davemloft.net>
360 lines
9.2 KiB
C
360 lines
9.2 KiB
C
/*
|
|
* Broadcom BCM7xxx internal transceivers support.
|
|
*
|
|
* Copyright (C) 2014, Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/brcmphy.h>
|
|
|
|
/* Broadcom BCM7xxx internal PHY registers */
|
|
#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
|
|
|
|
/* 40nm only register definitions */
|
|
#define MII_BCM7XXX_100TX_AUX_CTL 0x10
|
|
#define MII_BCM7XXX_100TX_FALSE_CAR 0x13
|
|
#define MII_BCM7XXX_100TX_DISC 0x14
|
|
#define MII_BCM7XXX_AUX_MODE 0x1d
|
|
#define MII_BCM7XX_64CLK_MDIO BIT(12)
|
|
#define MII_BCM7XXX_CORE_BASE1E 0x1e
|
|
#define MII_BCM7XXX_TEST 0x1f
|
|
#define MII_BCM7XXX_SHD_MODE_2 BIT(2)
|
|
|
|
/* 28nm only register definitions */
|
|
#define MISC_ADDR(base, channel) base, channel
|
|
|
|
#define DSP_TAP10 MISC_ADDR(0x0a, 0)
|
|
#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1)
|
|
#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2)
|
|
#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0)
|
|
|
|
#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0)
|
|
#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1)
|
|
#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3)
|
|
#define AFE_TX_CONFIG MISC_ADDR(0x39, 0)
|
|
#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
|
|
|
|
#define CORE_EXPB0 0xb0
|
|
|
|
static int bcm7445_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
const struct bcm7445_regs {
|
|
int reg;
|
|
u16 value;
|
|
} bcm7445_regs_cfg[] = {
|
|
/* increases ADC latency by 24ns */
|
|
{ MII_BCM54XX_EXP_SEL, 0x0038 },
|
|
{ MII_BCM54XX_EXP_DATA, 0xAB95 },
|
|
/* increases internal 1V LDO voltage by 5% */
|
|
{ MII_BCM54XX_EXP_SEL, 0x2038 },
|
|
{ MII_BCM54XX_EXP_DATA, 0xBB22 },
|
|
/* reduce RX low pass filter corner frequency */
|
|
{ MII_BCM54XX_EXP_SEL, 0x6038 },
|
|
{ MII_BCM54XX_EXP_DATA, 0xFFC5 },
|
|
/* reduce RX high pass filter corner frequency */
|
|
{ MII_BCM54XX_EXP_SEL, 0x003a },
|
|
{ MII_BCM54XX_EXP_DATA, 0x2002 },
|
|
};
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bcm7445_regs_cfg); i++) {
|
|
ret = phy_write(phydev,
|
|
bcm7445_regs_cfg[i].reg,
|
|
bcm7445_regs_cfg[i].value);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void phy_write_exp(struct phy_device *phydev,
|
|
u16 reg, u16 value)
|
|
{
|
|
phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
|
|
phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
|
|
}
|
|
|
|
static void phy_write_misc(struct phy_device *phydev,
|
|
u16 reg, u16 chl, u16 value)
|
|
{
|
|
int tmp;
|
|
|
|
phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
|
|
|
|
tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
|
|
tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
|
|
phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
|
|
|
|
tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
|
|
phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
|
|
|
|
phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
|
|
}
|
|
|
|
static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
|
|
{
|
|
/* Increase VCO range to prevent unlocking problem of PLL at low
|
|
* temp
|
|
*/
|
|
phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
|
|
|
|
/* Change Ki to 011 */
|
|
phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
|
|
|
|
/* Disable loading of TVCO buffer to bandgap, set bandgap trim
|
|
* to 111
|
|
*/
|
|
phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
|
|
|
|
/* Adjust bias current trim by -3 */
|
|
phy_write_misc(phydev, DSP_TAP10, 0x690b);
|
|
|
|
/* Switch to CORE_BASE1E */
|
|
phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
|
|
|
|
/* Reset R_CAL/RC_CAL Engine */
|
|
phy_write_exp(phydev, CORE_EXPB0, 0x0010);
|
|
|
|
/* Disable Reset R_CAL/RC_CAL Engine */
|
|
phy_write_exp(phydev, CORE_EXPB0, 0x0000);
|
|
|
|
/* write AFE_RXCONFIG_0 */
|
|
phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
|
|
|
|
/* write AFE_RXCONFIG_1 */
|
|
phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
|
|
|
|
/* write AFE_RX_LP_COUNTER */
|
|
phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
|
|
|
|
/* write AFE_HPF_TRIM_OTHERS */
|
|
phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
|
|
|
|
/* write AFTE_TX_CONFIG */
|
|
phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = bcm7445_config_init(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return bcm7xxx_28nm_afe_config_init(phydev);
|
|
}
|
|
|
|
static int bcm7xxx_28nm_resume(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Re-apply workarounds coming out suspend/resume */
|
|
ret = bcm7xxx_28nm_config_init(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 28nm Gigabit PHYs come out of reset without any half-duplex
|
|
* or "hub" compliant advertised mode, fix that. This does not
|
|
* cause any problems with the PHY library since genphy_config_aneg()
|
|
* gracefully handles auto-negotiated and forced modes.
|
|
*/
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int phy_set_clr_bits(struct phy_device *dev, int location,
|
|
int set_mask, int clr_mask)
|
|
{
|
|
int v, ret;
|
|
|
|
v = phy_read(dev, location);
|
|
if (v < 0)
|
|
return v;
|
|
|
|
v &= ~clr_mask;
|
|
v |= set_mask;
|
|
|
|
ret = phy_write(dev, location, v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return v;
|
|
}
|
|
|
|
static int bcm7xxx_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable 64 clock MDIO */
|
|
phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
|
|
phy_read(phydev, MII_BCM7XXX_AUX_MODE);
|
|
|
|
/* Workaround only required for 100Mbits/sec */
|
|
if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR))
|
|
return 0;
|
|
|
|
/* set shadow mode 2 */
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
|
|
MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set iddq_clkbias */
|
|
phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0F00);
|
|
udelay(10);
|
|
|
|
/* reset iddq_clkbias */
|
|
phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0C00);
|
|
|
|
phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
|
|
|
|
/* reset shadow mode 2 */
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Workaround for putting the PHY in IDDQ mode, required
|
|
* for all BCM7XXX 40nm and 65nm PHYs
|
|
*/
|
|
static int bcm7xxx_suspend(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
const struct bcm7xxx_regs {
|
|
int reg;
|
|
u16 value;
|
|
} bcm7xxx_suspend_cfg[] = {
|
|
{ MII_BCM7XXX_TEST, 0x008b },
|
|
{ MII_BCM7XXX_100TX_AUX_CTL, 0x01c0 },
|
|
{ MII_BCM7XXX_100TX_DISC, 0x7000 },
|
|
{ MII_BCM7XXX_TEST, 0x000f },
|
|
{ MII_BCM7XXX_100TX_AUX_CTL, 0x20d0 },
|
|
{ MII_BCM7XXX_TEST, 0x000b },
|
|
};
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) {
|
|
ret = phy_write(phydev,
|
|
bcm7xxx_suspend_cfg[i].reg,
|
|
bcm7xxx_suspend_cfg[i].value);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver bcm7xxx_driver[] = {
|
|
{
|
|
.phy_id = PHY_ID_BCM7366,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Broadcom BCM7366",
|
|
.features = PHY_GBIT_FEATURES |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = bcm7xxx_28nm_afe_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.resume = bcm7xxx_28nm_resume,
|
|
.driver = { .owner = THIS_MODULE },
|
|
}, {
|
|
.phy_id = PHY_ID_BCM7439,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Broadcom BCM7439",
|
|
.features = PHY_GBIT_FEATURES |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = bcm7xxx_28nm_afe_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.resume = bcm7xxx_28nm_resume,
|
|
.driver = { .owner = THIS_MODULE },
|
|
}, {
|
|
.phy_id = PHY_ID_BCM7445,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Broadcom BCM7445",
|
|
.features = PHY_GBIT_FEATURES |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = bcm7xxx_28nm_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.resume = bcm7xxx_28nm_afe_config_init,
|
|
.driver = { .owner = THIS_MODULE },
|
|
}, {
|
|
.phy_id = PHY_BCM_OUI_4,
|
|
.phy_id_mask = 0xffff0000,
|
|
.name = "Broadcom BCM7XXX 40nm",
|
|
.features = PHY_GBIT_FEATURES |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = bcm7xxx_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.suspend = bcm7xxx_suspend,
|
|
.resume = bcm7xxx_config_init,
|
|
.driver = { .owner = THIS_MODULE },
|
|
}, {
|
|
.phy_id = PHY_BCM_OUI_5,
|
|
.phy_id_mask = 0xffffff00,
|
|
.name = "Broadcom BCM7XXX 65nm",
|
|
.features = PHY_BASIC_FEATURES |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = bcm7xxx_dummy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.suspend = bcm7xxx_suspend,
|
|
.resume = bcm7xxx_config_init,
|
|
.driver = { .owner = THIS_MODULE },
|
|
} };
|
|
|
|
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
|
|
{ PHY_ID_BCM7366, 0xfffffff0, },
|
|
{ PHY_ID_BCM7439, 0xfffffff0, },
|
|
{ PHY_ID_BCM7445, 0xfffffff0, },
|
|
{ PHY_BCM_OUI_4, 0xffff0000 },
|
|
{ PHY_BCM_OUI_5, 0xffffff00 },
|
|
{ }
|
|
};
|
|
|
|
static int __init bcm7xxx_phy_init(void)
|
|
{
|
|
return phy_drivers_register(bcm7xxx_driver,
|
|
ARRAY_SIZE(bcm7xxx_driver));
|
|
}
|
|
|
|
static void __exit bcm7xxx_phy_exit(void)
|
|
{
|
|
phy_drivers_unregister(bcm7xxx_driver,
|
|
ARRAY_SIZE(bcm7xxx_driver));
|
|
}
|
|
|
|
module_init(bcm7xxx_phy_init);
|
|
module_exit(bcm7xxx_phy_exit);
|
|
|
|
MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);
|
|
|
|
MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Broadcom Corporation");
|