linux_dsm_epyc7002/arch/x86/kernel/irq_32.c
Nicolai Stange 447ae31667 x86: Don't include linux/irq.h from asm/hardirq.h
The next patch in this series will have to make the definition of
irq_cpustat_t available to entering_irq().

Inclusion of asm/hardirq.h into asm/apic.h would cause circular header
dependencies like

  asm/smp.h
    asm/apic.h
      asm/hardirq.h
        linux/irq.h
          linux/topology.h
            linux/smp.h
              asm/smp.h

or

  linux/gfp.h
    linux/mmzone.h
      asm/mmzone.h
        asm/mmzone_64.h
          asm/smp.h
            asm/apic.h
              asm/hardirq.h
                linux/irq.h
                  linux/irqdesc.h
                    linux/kobject.h
                      linux/sysfs.h
                        linux/kernfs.h
                          linux/idr.h
                            linux/gfp.h

and others.

This causes compilation errors because of the header guards becoming
effective in the second inclusion: symbols/macros that had been defined
before wouldn't be available to intermediate headers in the #include chain
anymore.

A possible workaround would be to move the definition of irq_cpustat_t
into its own header and include that from both, asm/hardirq.h and
asm/apic.h.

However, this wouldn't solve the real problem, namely asm/harirq.h
unnecessarily pulling in all the linux/irq.h cruft: nothing in
asm/hardirq.h itself requires it. Also, note that there are some other
archs, like e.g. arm64, which don't have that #include in their
asm/hardirq.h.

Remove the linux/irq.h #include from x86' asm/hardirq.h.

Fix resulting compilation errors by adding appropriate #includes to *.c
files as needed.

Note that some of these *.c files could be cleaned up a bit wrt. to their
set of #includes, but that should better be done from separate patches, if
at all.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-08-05 09:53:13 +02:00

165 lines
4.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
*
* This file contains the lowest level x86-specific interrupt
* entry, irq-stacks and irq statistics code. All the remaining
* irq logic is done by the generic kernel/irq/ code and
* by the x86-specific irq controller code. (e.g. i8259.c and
* io_apic.c.)
*/
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
#include <linux/percpu.h>
#include <linux/mm.h>
#include <asm/apic.h>
#include <asm/nospec-branch.h>
#ifdef CONFIG_DEBUG_STACKOVERFLOW
int sysctl_panic_on_stackoverflow __read_mostly;
/* Debugging check for stack overflow: is there less than 1KB free? */
static int check_stack_overflow(void)
{
long sp;
__asm__ __volatile__("andl %%esp,%0" :
"=r" (sp) : "0" (THREAD_SIZE - 1));
return sp < (sizeof(struct thread_info) + STACK_WARN);
}
static void print_stack_overflow(void)
{
printk(KERN_WARNING "low stack detected by irq handler\n");
dump_stack();
if (sysctl_panic_on_stackoverflow)
panic("low stack detected by irq handler - check messages\n");
}
#else
static inline int check_stack_overflow(void) { return 0; }
static inline void print_stack_overflow(void) { }
#endif
DEFINE_PER_CPU(struct irq_stack *, hardirq_stack);
DEFINE_PER_CPU(struct irq_stack *, softirq_stack);
static void call_on_stack(void *func, void *stack)
{
asm volatile("xchgl %%ebx,%%esp \n"
CALL_NOSPEC
"movl %%ebx,%%esp \n"
: "=b" (stack)
: "0" (stack),
[thunk_target] "D"(func)
: "memory", "cc", "edx", "ecx", "eax");
}
static inline void *current_stack(void)
{
return (void *)(current_stack_pointer & ~(THREAD_SIZE - 1));
}
static inline int execute_on_irq_stack(int overflow, struct irq_desc *desc)
{
struct irq_stack *curstk, *irqstk;
u32 *isp, *prev_esp, arg1;
curstk = (struct irq_stack *) current_stack();
irqstk = __this_cpu_read(hardirq_stack);
/*
* this is where we switch to the IRQ stack. However, if we are
* already using the IRQ stack (because we interrupted a hardirq
* handler) we can't do that and just have to keep using the
* current stack (which is the irq stack already after all)
*/
if (unlikely(curstk == irqstk))
return 0;
isp = (u32 *) ((char *)irqstk + sizeof(*irqstk));
/* Save the next esp at the bottom of the stack */
prev_esp = (u32 *)irqstk;
*prev_esp = current_stack_pointer;
if (unlikely(overflow))
call_on_stack(print_stack_overflow, isp);
asm volatile("xchgl %%ebx,%%esp \n"
CALL_NOSPEC
"movl %%ebx,%%esp \n"
: "=a" (arg1), "=b" (isp)
: "0" (desc), "1" (isp),
[thunk_target] "D" (desc->handle_irq)
: "memory", "cc", "ecx");
return 1;
}
/*
* allocate per-cpu stacks for hardirq and for softirq processing
*/
void irq_ctx_init(int cpu)
{
struct irq_stack *irqstk;
if (per_cpu(hardirq_stack, cpu))
return;
irqstk = page_address(alloc_pages_node(cpu_to_node(cpu),
THREADINFO_GFP,
THREAD_SIZE_ORDER));
per_cpu(hardirq_stack, cpu) = irqstk;
irqstk = page_address(alloc_pages_node(cpu_to_node(cpu),
THREADINFO_GFP,
THREAD_SIZE_ORDER));
per_cpu(softirq_stack, cpu) = irqstk;
printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n",
cpu, per_cpu(hardirq_stack, cpu), per_cpu(softirq_stack, cpu));
}
void do_softirq_own_stack(void)
{
struct irq_stack *irqstk;
u32 *isp, *prev_esp;
irqstk = __this_cpu_read(softirq_stack);
/* build the stack frame on the softirq stack */
isp = (u32 *) ((char *)irqstk + sizeof(*irqstk));
/* Push the previous esp onto the stack */
prev_esp = (u32 *)irqstk;
*prev_esp = current_stack_pointer;
call_on_stack(__do_softirq, isp);
}
bool handle_irq(struct irq_desc *desc, struct pt_regs *regs)
{
int overflow = check_stack_overflow();
if (IS_ERR_OR_NULL(desc))
return false;
if (user_mode(regs) || !execute_on_irq_stack(overflow, desc)) {
if (unlikely(overflow))
print_stack_overflow();
generic_handle_irq_desc(desc);
}
return true;
}