AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-02 08:56:41 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
8231f0eddb
linux_dsm_epyc7002/drivers/scsi/qla4xxx/ql4_mbx.c
David C Somayajulu 477ffb9d87 [SCSI] qla4xxx: bug fixes 
The included patch fixes the following issues:

1. qla3xxx/qla4xxx co-existence issue which can result in a lockup
when qla3xxx driver is unloaded, or when ifdown; ifup is performed on
one of the interfaces correponding to qla3xxx. This is because qla4xxx
HBA supports one ethernet and iscsi interfaces per port. Both iscsi
and ethernet interfaces share the same state machine. The problem has
to do with synchronizing access to the state machine in the event of a
reset

2. mutex_lock() is sometimes not followed by mutex_unlock() prior to
invoking a msleep() in qla4xxx_mailbox_command()

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-27 09:15:46 -06:00

938 lines
28 KiB
C
Raw Blame History

/*
* QLogic iSCSI HBA Driver
* Copyright (c) 2003-2006 QLogic Corporation
*
* See LICENSE.qla4xxx for copyright and licensing details.
*/
#include "ql4_def.h"
/**
* qla4xxx_mailbox_command - issues mailbox commands
* @ha: Pointer to host adapter structure.
* @inCount: number of mailbox registers to load.
* @outCount: number of mailbox registers to return.
* @mbx_cmd: data pointer for mailbox in registers.
* @mbx_sts: data pointer for mailbox out registers.
*
* This routine sssue mailbox commands and waits for completion.
* If outCount is 0, this routine completes successfully WITHOUT waiting
* for the mailbox command to complete.
**/
int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
uint8_t outCount, uint32_t *mbx_cmd,
uint32_t *mbx_sts)
{
int status = QLA_ERROR;
uint8_t i;
u_long wait_count;
uint32_t intr_status;
unsigned long flags = 0;
/* Make sure that pointers are valid */
if (!mbx_cmd || !mbx_sts) {
DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts "
"pointer\n", ha->host_no, __func__));
return status;
}
/* Mailbox code active */
wait_count = MBOX_TOV * 100;
while (wait_count--) {
mutex_lock(&ha->mbox_sem);
if (!test_bit(AF_MBOX_COMMAND, &ha->flags)) {
set_bit(AF_MBOX_COMMAND, &ha->flags);
mutex_unlock(&ha->mbox_sem);
break;
}
mutex_unlock(&ha->mbox_sem);
if (!wait_count) {
DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n",
ha->host_no, __func__));
return status;
}
msleep(10);
}
/* To prevent overwriting mailbox registers for a command that has
* not yet been serviced, check to see if a previously issued
* mailbox command is interrupting.
* -----------------------------------------------------------------
*/
spin_lock_irqsave(&ha->hardware_lock, flags);
intr_status = readl(&ha->reg->ctrl_status);
if (intr_status & CSR_SCSI_PROCESSOR_INTR) {
/* Service existing interrupt */
qla4xxx_interrupt_service_routine(ha, intr_status);
clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
}
/* Send the mailbox command to the firmware */
ha->mbox_status_count = outCount;
for (i = 0; i < outCount; i++)
ha->mbox_status[i] = 0;
/* Load all mailbox registers, except mailbox 0. */
for (i = 1; i < inCount; i++)
writel(mbx_cmd[i], &ha->reg->mailbox[i]);
/* Wakeup firmware */
writel(mbx_cmd[0], &ha->reg->mailbox[0]);
readl(&ha->reg->mailbox[0]);
writel(set_rmask(CSR_INTR_RISC), &ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Wait for completion */
/*
* If we don't want status, don't wait for the mailbox command to
* complete. For example, MBOX_CMD_RESET_FW doesn't return status,
* you must poll the inbound Interrupt Mask for completion.
*/
if (outCount == 0) {
status = QLA_SUCCESS;
goto mbox_exit;
}
/* Wait for command to complete */
wait_count = jiffies + MBOX_TOV * HZ;
while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) {
if (time_after_eq(jiffies, wait_count))
break;
spin_lock_irqsave(&ha->hardware_lock, flags);
intr_status = readl(&ha->reg->ctrl_status);
if (intr_status & INTR_PENDING) {
/*
* Service the interrupt.
* The ISR will save the mailbox status registers
* to a temporary storage location in the adapter
* structure.
*/
ha->mbox_status_count = outCount;
qla4xxx_interrupt_service_routine(ha, intr_status);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
msleep(10);
}
/* Check for mailbox timeout. */
if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) {
DEBUG2(printk("scsi%ld: Mailbox Cmd 0x%08X timed out ...,"
" Scheduling Adapter Reset\n", ha->host_no,
mbx_cmd[0]));
ha->mailbox_timeout_count++;
mbx_sts[0] = (-1);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
goto mbox_exit;
}
/*
* Copy the mailbox out registers to the caller's mailbox in/out
* structure.
*/
spin_lock_irqsave(&ha->hardware_lock, flags);
for (i = 0; i < outCount; i++)
mbx_sts[i] = ha->mbox_status[i];
/* Set return status and error flags (if applicable). */
switch (ha->mbox_status[0]) {
case MBOX_STS_COMMAND_COMPLETE:
status = QLA_SUCCESS;
break;
case MBOX_STS_INTERMEDIATE_COMPLETION:
status = QLA_SUCCESS;
break;
case MBOX_STS_BUSY:
DEBUG2( printk("scsi%ld: %s: Cmd = %08X, ISP BUSY\n",
ha->host_no, __func__, mbx_cmd[0]));
ha->mailbox_timeout_count++;
break;
default:
DEBUG2(printk("scsi%ld: %s: **** FAILED, cmd = %08X, "
"sts = %08X ****\n", ha->host_no, __func__,
mbx_cmd[0], mbx_sts[0]));
break;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
mbox_exit:
mutex_lock(&ha->mbox_sem);
clear_bit(AF_MBOX_COMMAND, &ha->flags);
mutex_unlock(&ha->mbox_sem);
clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
return status;
}
/**
* qla4xxx_issue_iocb - issue mailbox iocb command
* @ha: adapter state pointer.
* @buffer: buffer pointer.
* @phys_addr: physical address of buffer.
* @size: size of buffer.
*
* Issues iocbs via mailbox commands.
* TARGET_QUEUE_LOCK must be released.
* ADAPTER_STATE_LOCK must be released.
**/
int
qla4xxx_issue_iocb(struct scsi_qla_host * ha, void *buffer,
dma_addr_t phys_addr, size_t size)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
int status;
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_EXECUTE_IOCB_A64;
mbox_cmd[1] = 0;
mbox_cmd[2] = LSDW(phys_addr);
mbox_cmd[3] = MSDW(phys_addr);
status = qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]);
return status;
}
int qla4xxx_conn_close_sess_logout(struct scsi_qla_host * ha,
uint16_t fw_ddb_index,
uint16_t connection_id,
uint16_t option)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT;
mbox_cmd[1] = fw_ddb_index;
mbox_cmd[2] = connection_id;
mbox_cmd[3] = LOGOUT_OPTION_RELOGIN;
if (qla4xxx_mailbox_command(ha, 4, 2, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_CONN_CLOSE_SESS_LOGOUT "
"option %04x failed sts %04X %04X",
ha->host_no, __func__,
option, mbox_sts[0], mbox_sts[1]));
if (mbox_sts[0] == 0x4005)
DEBUG2(printk("%s reason %04X\n", __func__,
mbox_sts[1]));
}
return QLA_SUCCESS;
}
int qla4xxx_clear_database_entry(struct scsi_qla_host * ha,
uint16_t fw_ddb_index)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_CLEAR_DATABASE_ENTRY;
mbox_cmd[1] = fw_ddb_index;
if (qla4xxx_mailbox_command(ha, 2, 5, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS)
return QLA_ERROR;
return QLA_SUCCESS;
}
/**
* qla4xxx_initialize_fw_cb - initializes firmware control block.
* @ha: Pointer to host adapter structure.
**/
int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
{
struct init_fw_ctrl_blk *init_fw_cb;
dma_addr_t init_fw_cb_dma;
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
int status = QLA_ERROR;
init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
sizeof(struct init_fw_ctrl_blk),
&init_fw_cb_dma, GFP_KERNEL);
if (init_fw_cb == NULL) {
DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
ha->host_no, __func__));
return 10;
}
memset(init_fw_cb, 0, sizeof(struct init_fw_ctrl_blk));
/* Get Initialize Firmware Control Block. */
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
mbox_cmd[2] = LSDW(init_fw_cb_dma);
mbox_cmd[3] = MSDW(init_fw_cb_dma);
if (qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
dma_free_coherent(&ha->pdev->dev,
sizeof(struct init_fw_ctrl_blk),
init_fw_cb, init_fw_cb_dma);
return status;
}
/* Initialize request and response queues. */
qla4xxx_init_rings(ha);
/* Fill in the request and response queue information. */
init_fw_cb->ReqQConsumerIndex = cpu_to_le16(ha->request_out);
init_fw_cb->ComplQProducerIndex = cpu_to_le16(ha->response_in);
init_fw_cb->ReqQLen = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH);
init_fw_cb->ComplQLen = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH);
init_fw_cb->ReqQAddrLo = cpu_to_le32(LSDW(ha->request_dma));
init_fw_cb->ReqQAddrHi = cpu_to_le32(MSDW(ha->request_dma));
init_fw_cb->ComplQAddrLo = cpu_to_le32(LSDW(ha->response_dma));
init_fw_cb->ComplQAddrHi = cpu_to_le32(MSDW(ha->response_dma));
init_fw_cb->ShadowRegBufAddrLo =
cpu_to_le32(LSDW(ha->shadow_regs_dma));
init_fw_cb->ShadowRegBufAddrHi =
cpu_to_le32(MSDW(ha->shadow_regs_dma));
/* Set up required options. */
init_fw_cb->FwOptions |=
__constant_cpu_to_le16(FWOPT_SESSION_MODE |
FWOPT_INITIATOR_MODE);
init_fw_cb->FwOptions &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);
/* Save some info in adapter structure. */
ha->firmware_options = le16_to_cpu(init_fw_cb->FwOptions);
ha->tcp_options = le16_to_cpu(init_fw_cb->TCPOptions);
ha->heartbeat_interval = init_fw_cb->HeartbeatInterval;
memcpy(ha->ip_address, init_fw_cb->IPAddr,
min(sizeof(ha->ip_address), sizeof(init_fw_cb->IPAddr)));
memcpy(ha->subnet_mask, init_fw_cb->SubnetMask,
min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->SubnetMask)));
memcpy(ha->gateway, init_fw_cb->GatewayIPAddr,
min(sizeof(ha->gateway), sizeof(init_fw_cb->GatewayIPAddr)));
memcpy(ha->name_string, init_fw_cb->iSCSINameString,
min(sizeof(ha->name_string),
sizeof(init_fw_cb->iSCSINameString)));
memcpy(ha->alias, init_fw_cb->Alias,
min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));
/* Save Command Line Paramater info */
ha->port_down_retry_count = le16_to_cpu(init_fw_cb->KeepAliveTimeout);
ha->discovery_wait = ql4xdiscoverywait;
/* Send Initialize Firmware Control Block. */
mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE;
mbox_cmd[1] = 0;
mbox_cmd[2] = LSDW(init_fw_cb_dma);
mbox_cmd[3] = MSDW(init_fw_cb_dma);
if (qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]) ==
QLA_SUCCESS)
status = QLA_SUCCESS;
else {
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_INITIALIZE_FIRMWARE "
"failed w/ status %04X\n", ha->host_no, __func__,
mbox_sts[0]));
}
dma_free_coherent(&ha->pdev->dev, sizeof(struct init_fw_ctrl_blk),
init_fw_cb, init_fw_cb_dma);
return status;
}
/**
* qla4xxx_get_dhcp_ip_address - gets HBA ip address via DHCP
* @ha: Pointer to host adapter structure.
**/
int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha)
{
struct init_fw_ctrl_blk *init_fw_cb;
dma_addr_t init_fw_cb_dma;
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
sizeof(struct init_fw_ctrl_blk),
&init_fw_cb_dma, GFP_KERNEL);
if (init_fw_cb == NULL) {
printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no,
__func__);
return 10;
}
/* Get Initialize Firmware Control Block. */
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
memset(init_fw_cb, 0, sizeof(struct init_fw_ctrl_blk));
mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
mbox_cmd[2] = LSDW(init_fw_cb_dma);
mbox_cmd[3] = MSDW(init_fw_cb_dma);
if (qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
ha->host_no, __func__));
dma_free_coherent(&ha->pdev->dev,
sizeof(struct init_fw_ctrl_blk),
init_fw_cb, init_fw_cb_dma);
return QLA_ERROR;
}
/* Save IP Address. */
memcpy(ha->ip_address, init_fw_cb->IPAddr,
min(sizeof(ha->ip_address), sizeof(init_fw_cb->IPAddr)));
memcpy(ha->subnet_mask, init_fw_cb->SubnetMask,
min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->SubnetMask)));
memcpy(ha->gateway, init_fw_cb->GatewayIPAddr,
min(sizeof(ha->gateway), sizeof(init_fw_cb->GatewayIPAddr)));
dma_free_coherent(&ha->pdev->dev, sizeof(struct init_fw_ctrl_blk),
init_fw_cb, init_fw_cb_dma);
return QLA_SUCCESS;
}
/**
* qla4xxx_get_firmware_state - gets firmware state of HBA
* @ha: Pointer to host adapter structure.
**/
int qla4xxx_get_firmware_state(struct scsi_qla_host * ha)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
/* Get firmware version */
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_GET_FW_STATE;
if (qla4xxx_mailbox_command(ha, 1, 4, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ "
"status %04X\n", ha->host_no, __func__,
mbox_sts[0]));
return QLA_ERROR;
}
ha->firmware_state = mbox_sts[1];
ha->board_id = mbox_sts[2];
ha->addl_fw_state = mbox_sts[3];
DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n",
ha->host_no, __func__, ha->firmware_state);)
return QLA_SUCCESS;
}
/**
* qla4xxx_get_firmware_status - retrieves firmware status
* @ha: Pointer to host adapter structure.
**/
int qla4xxx_get_firmware_status(struct scsi_qla_host * ha)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
/* Get firmware version */
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_GET_FW_STATUS;
if (qla4xxx_mailbox_command(ha, 1, 3, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ "
"status %04X\n", ha->host_no, __func__,
mbox_sts[0]));
return QLA_ERROR;
}
/* High-water mark of IOCBs */
ha->iocb_hiwat = mbox_sts[2];
if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION)
ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
else
dev_info(&ha->pdev->dev, "WARNING!!! You have less than %d "
"firmare IOCBs available (%d).\n",
IOCB_HIWAT_CUSHION, ha->iocb_hiwat);
return QLA_SUCCESS;
}
/**
* qla4xxx_get_fwddb_entry - retrieves firmware ddb entry
* @ha: Pointer to host adapter structure.
* @fw_ddb_index: Firmware's device database index
* @fw_ddb_entry: Pointer to firmware's device database entry structure
* @num_valid_ddb_entries: Pointer to number of valid ddb entries
* @next_ddb_index: Pointer to next valid device database index
* @fw_ddb_device_state: Pointer to device state
**/
int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha,
uint16_t fw_ddb_index,
struct dev_db_entry *fw_ddb_entry,
dma_addr_t fw_ddb_entry_dma,
uint32_t *num_valid_ddb_entries,
uint32_t *next_ddb_index,
uint32_t *fw_ddb_device_state,
uint32_t *conn_err_detail,
uint16_t *tcp_source_port_num,
uint16_t *connection_id)
{
int status = QLA_ERROR;
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
/* Make sure the device index is valid */
if (fw_ddb_index >= MAX_DDB_ENTRIES) {
DEBUG2(printk("scsi%ld: %s: index [%d] out of range.\n",
ha->host_no, __func__, fw_ddb_index));
goto exit_get_fwddb;
}
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY;
mbox_cmd[1] = (uint32_t) fw_ddb_index;
mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
if (qla4xxx_mailbox_command(ha, 4, 7, &mbox_cmd[0], &mbox_sts[0]) ==
QLA_ERROR) {
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed"
" with status 0x%04X\n", ha->host_no, __func__,
mbox_sts[0]));
goto exit_get_fwddb;
}
if (fw_ddb_index != mbox_sts[1]) {
DEBUG2(printk("scsi%ld: %s: index mismatch [%d] != [%d].\n",
ha->host_no, __func__, fw_ddb_index,
mbox_sts[1]));
goto exit_get_fwddb;
}
if (fw_ddb_entry) {
dev_info(&ha->pdev->dev, "DDB[%d] MB0 %04x Tot %d Next %d "
"State %04x ConnErr %08x %d.%d.%d.%d:%04d \"%s\"\n",
fw_ddb_index, mbox_sts[0], mbox_sts[2], mbox_sts[3],
mbox_sts[4], mbox_sts[5], fw_ddb_entry->ipAddr[0],
fw_ddb_entry->ipAddr[1], fw_ddb_entry->ipAddr[2],
fw_ddb_entry->ipAddr[3],
le16_to_cpu(fw_ddb_entry->portNumber),
fw_ddb_entry->iscsiName);
}
if (num_valid_ddb_entries)
*num_valid_ddb_entries = mbox_sts[2];
if (next_ddb_index)
*next_ddb_index = mbox_sts[3];
if (fw_ddb_device_state)
*fw_ddb_device_state = mbox_sts[4];
/*
* RA: This mailbox has been changed to pass connection error and
* details. Its true for ISP4010 as per Version E - Not sure when it
* was changed. Get the time2wait from the fw_dd_entry field :
* default_time2wait which we call it as minTime2Wait DEV_DB_ENTRY
* struct.
*/
if (conn_err_detail)
*conn_err_detail = mbox_sts[5];
if (tcp_source_port_num)
*tcp_source_port_num = (uint16_t) mbox_sts[6] >> 16;
if (connection_id)
*connection_id = (uint16_t) mbox_sts[6] & 0x00FF;
status = QLA_SUCCESS;
exit_get_fwddb:
return status;
}
/**
* qla4xxx_set_fwddb_entry - sets a ddb entry.
* @ha: Pointer to host adapter structure.
* @fw_ddb_index: Firmware's device database index
* @fw_ddb_entry: Pointer to firmware's ddb entry structure, or NULL.
*
* This routine initializes or updates the adapter's device database
* entry for the specified device. It also triggers a login for the
* specified device. Therefore, it may also be used as a secondary
* login routine when a NULL pointer is specified for the fw_ddb_entry.
**/
int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index,
dma_addr_t fw_ddb_entry_dma)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
/* Do not wait for completion. The firmware will send us an
* ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status.
*/
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_SET_DATABASE_ENTRY;
mbox_cmd[1] = (uint32_t) fw_ddb_index;
mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
return qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]);
}
int qla4xxx_conn_open_session_login(struct scsi_qla_host * ha,
uint16_t fw_ddb_index)
{
int status = QLA_ERROR;
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
/* Do not wait for completion. The firmware will send us an
* ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status.
*/
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_CONN_OPEN_SESS_LOGIN;
mbox_cmd[1] = (uint32_t) fw_ddb_index;
mbox_cmd[2] = 0;
mbox_cmd[3] = 0;
mbox_cmd[4] = 0;
status = qla4xxx_mailbox_command(ha, 4, 0, &mbox_cmd[0], &mbox_sts[0]);
DEBUG2(printk("%s fw_ddb_index=%d status=%d mbx0_1=0x%x :0x%x\n",
__func__, fw_ddb_index, status, mbox_sts[0],
mbox_sts[1]);)
return status;
}
/**
* qla4xxx_get_crash_record - retrieves crash record.
* @ha: Pointer to host adapter structure.
*
* This routine retrieves a crash record from the QLA4010 after an 8002h aen.
**/
void qla4xxx_get_crash_record(struct scsi_qla_host * ha)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
struct crash_record *crash_record = NULL;
dma_addr_t crash_record_dma = 0;
uint32_t crash_record_size = 0;
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_cmd));
/* Get size of crash record. */
mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
if (qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n",
ha->host_no, __func__));
goto exit_get_crash_record;
}
crash_record_size = mbox_sts[4];
if (crash_record_size == 0) {
DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n",
ha->host_no, __func__));
goto exit_get_crash_record;
}
/* Alloc Memory for Crash Record. */
crash_record = dma_alloc_coherent(&ha->pdev->dev, crash_record_size,
&crash_record_dma, GFP_KERNEL);
if (crash_record == NULL)
goto exit_get_crash_record;
/* Get Crash Record. */
mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
mbox_cmd[2] = LSDW(crash_record_dma);
mbox_cmd[3] = MSDW(crash_record_dma);
mbox_cmd[4] = crash_record_size;
if (qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS)
goto exit_get_crash_record;
/* Dump Crash Record. */
exit_get_crash_record:
if (crash_record)
dma_free_coherent(&ha->pdev->dev, crash_record_size,
crash_record, crash_record_dma);
}
/**
* qla4xxx_get_conn_event_log - retrieves connection event log
* @ha: Pointer to host adapter structure.
**/
void qla4xxx_get_conn_event_log(struct scsi_qla_host * ha)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
struct conn_event_log_entry *event_log = NULL;
dma_addr_t event_log_dma = 0;
uint32_t event_log_size = 0;
uint32_t num_valid_entries;
uint32_t oldest_entry = 0;
uint32_t max_event_log_entries;
uint8_t i;
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_cmd));
/* Get size of crash record. */
mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
if (qla4xxx_mailbox_command(ha, 4, 5, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS)
goto exit_get_event_log;
event_log_size = mbox_sts[4];
if (event_log_size == 0)
goto exit_get_event_log;
/* Alloc Memory for Crash Record. */
event_log = dma_alloc_coherent(&ha->pdev->dev, event_log_size,
&event_log_dma, GFP_KERNEL);
if (event_log == NULL)
goto exit_get_event_log;
/* Get Crash Record. */
mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
mbox_cmd[2] = LSDW(event_log_dma);
mbox_cmd[3] = MSDW(event_log_dma);
if (qla4xxx_mailbox_command(ha, 4, 5, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event "
"log!\n", ha->host_no, __func__));
goto exit_get_event_log;
}
/* Dump Event Log. */
num_valid_entries = mbox_sts[1];
max_event_log_entries = event_log_size /
sizeof(struct conn_event_log_entry);
if (num_valid_entries > max_event_log_entries)
oldest_entry = num_valid_entries % max_event_log_entries;
DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n",
ha->host_no, num_valid_entries));
if (ql4xextended_error_logging == 3) {
if (oldest_entry == 0) {
/* Circular Buffer has not wrapped around */
for (i=0; i < num_valid_entries; i++) {
qla4xxx_dump_buffer((uint8_t *)event_log+
(i*sizeof(*event_log)),
sizeof(*event_log));
}
}
else {
/* Circular Buffer has wrapped around -
* display accordingly*/
for (i=oldest_entry; i < max_event_log_entries; i++) {
qla4xxx_dump_buffer((uint8_t *)event_log+
(i*sizeof(*event_log)),
sizeof(*event_log));
}
for (i=0; i < oldest_entry; i++) {
qla4xxx_dump_buffer((uint8_t *)event_log+
(i*sizeof(*event_log)),
sizeof(*event_log));
}
}
}
exit_get_event_log:
if (event_log)
dma_free_coherent(&ha->pdev->dev, event_log_size, event_log,
event_log_dma);
}
/**
* qla4xxx_reset_lun - issues LUN Reset
* @ha: Pointer to host adapter structure.
* @db_entry: Pointer to device database entry
* @un_entry: Pointer to lun entry structure
*
* This routine performs a LUN RESET on the specified target/lun.
* The caller must ensure that the ddb_entry and lun_entry pointers
* are valid before calling this routine.
**/
int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry,
int lun)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
int status = QLA_SUCCESS;
DEBUG2(printk("scsi%ld:%d:%d: lun reset issued\n", ha->host_no,
ddb_entry->os_target_id, lun));
/*
* Send lun reset command to ISP, so that the ISP will return all
* outstanding requests with RESET status
*/
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_LUN_RESET;
mbox_cmd[1] = ddb_entry->fw_ddb_index;
mbox_cmd[2] = lun << 8;
mbox_cmd[5] = 0x01; /* Immediate Command Enable */
qla4xxx_mailbox_command(ha, 6, 1, &mbox_cmd[0], &mbox_sts[0]);
if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE &&
mbox_sts[0] != MBOX_STS_COMMAND_ERROR)
status = QLA_ERROR;
return status;
}
int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr,
uint32_t offset, uint32_t len)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_READ_FLASH;
mbox_cmd[1] = LSDW(dma_addr);
mbox_cmd[2] = MSDW(dma_addr);
mbox_cmd[3] = offset;
mbox_cmd[4] = len;
if (qla4xxx_mailbox_command(ha, 5, 2, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ "
"status %04X %04X, offset %08x, len %08x\n", ha->host_no,
__func__, mbox_sts[0], mbox_sts[1], offset, len));
return QLA_ERROR;
}
return QLA_SUCCESS;
}
/**
* qla4xxx_get_fw_version - gets firmware version
* @ha: Pointer to host adapter structure.
*
* Retrieves the firmware version on HBA. In QLA4010, mailboxes 2 & 3 may
* hold an address for data. Make sure that we write 0 to those mailboxes,
* if unused.
**/
int qla4xxx_get_fw_version(struct scsi_qla_host * ha)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
/* Get firmware version. */
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_ABOUT_FW;
if (qla4xxx_mailbox_command(ha, 4, 5, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_ABOUT_FW failed w/ "
"status %04X\n", ha->host_no, __func__, mbox_sts[0]));
return QLA_ERROR;
}
/* Save firmware version information. */
ha->firmware_version[0] = mbox_sts[1];
ha->firmware_version[1] = mbox_sts[2];
ha->patch_number = mbox_sts[3];
ha->build_number = mbox_sts[4];
return QLA_SUCCESS;
}
int qla4xxx_get_default_ddb(struct scsi_qla_host *ha, dma_addr_t dma_addr)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS;
mbox_cmd[2] = LSDW(dma_addr);
mbox_cmd[3] = MSDW(dma_addr);
if (qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
ha->host_no, __func__, mbox_sts[0]));
return QLA_ERROR;
}
return QLA_SUCCESS;
}
int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t *ddb_index)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_REQUEST_DATABASE_ENTRY;
mbox_cmd[1] = MAX_PRST_DEV_DB_ENTRIES;
if (qla4xxx_mailbox_command(ha, 2, 3, &mbox_cmd[0], &mbox_sts[0]) !=
QLA_SUCCESS) {
if (mbox_sts[0] == MBOX_STS_COMMAND_ERROR) {
*ddb_index = mbox_sts[2];
} else {
DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
ha->host_no, __func__, mbox_sts[0]));
return QLA_ERROR;
}
} else {
*ddb_index = MAX_PRST_DEV_DB_ENTRIES;
}
return QLA_SUCCESS;
}
int qla4xxx_send_tgts(struct scsi_qla_host *ha, char *ip, uint16_t port)
{
struct dev_db_entry *fw_ddb_entry;
dma_addr_t fw_ddb_entry_dma;
uint32_t ddb_index;
int ret_val = QLA_SUCCESS;
fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev,
sizeof(*fw_ddb_entry),
&fw_ddb_entry_dma, GFP_KERNEL);
if (!fw_ddb_entry) {
DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
ha->host_no, __func__));
ret_val = QLA_ERROR;
goto qla4xxx_send_tgts_exit;
}
ret_val = qla4xxx_get_default_ddb(ha, fw_ddb_entry_dma);
if (ret_val != QLA_SUCCESS)
goto qla4xxx_send_tgts_exit;
ret_val = qla4xxx_req_ddb_entry(ha, &ddb_index);
if (ret_val != QLA_SUCCESS)
goto qla4xxx_send_tgts_exit;
memset((void *)fw_ddb_entry->iSCSIAlias, 0,
sizeof(fw_ddb_entry->iSCSIAlias));
memset((void *)fw_ddb_entry->iscsiName, 0,
sizeof(fw_ddb_entry->iscsiName));
memset((void *)fw_ddb_entry->ipAddr, 0, sizeof(fw_ddb_entry->ipAddr));
memset((void *)fw_ddb_entry->targetAddr, 0,
sizeof(fw_ddb_entry->targetAddr));
fw_ddb_entry->options = (DDB_OPT_DISC_SESSION | DDB_OPT_TARGET);
fw_ddb_entry->portNumber = cpu_to_le16(ntohs(port));
fw_ddb_entry->ipAddr[0] = *ip;
fw_ddb_entry->ipAddr[1] = *(ip + 1);
fw_ddb_entry->ipAddr[2] = *(ip + 2);
fw_ddb_entry->ipAddr[3] = *(ip + 3);
ret_val = qla4xxx_set_ddb_entry(ha, ddb_index, fw_ddb_entry_dma);
qla4xxx_send_tgts_exit:
dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
fw_ddb_entry, fw_ddb_entry_dma);
return ret_val;
}
Reference in New Issue View Git Blame Copy Permalink