mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 18:25:27 +07:00
81f794d701
* Use newly added Gen-3 fallback compat string This is consistent with ongoing efforts to use per-generation fallback strings where appropriate across devices found on R-Car SoCs. The aim of the effort being to strike a balance between the limited information available about the compatibility of devices found on different SoCs and the desire to ease enabling devices on new SoCs. This has no run-time effect due to the presence of a per-SoC compat string. * Enable second CPU core on RZ/G1M (r8a7743) The RZ/G1M has two CA15 cores running at up to 1.5GHz * Enable frequency scaling on RZ/G1M (r8a7743) * Add six I2C cores to RZ/G1M (r8a7743) SoC DT This is a step towards enabling these cores on boards that use this SoC * Add CEC clock for HDMI transmitter to R-Car M2-W (r8a7791) Koelsch Hans Verkuil says "The adv7511 on the Koelsch board has a 12 MHz fixed clock for the CEC block. Specify this in the dts to enable CEC support." * Add PFC support to RZ/G1E (r8a7745) SoC and add Ethernet and SCIF2 pins to SK-RZG1E board. This allows the kernel to control multiplexed pins for Ethernet and SCIF2 rather than relying on setup inherited at boot. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZlWSzAAoJENfPZGlqN0++hzgQAK58yzDkHbv4fyI0Y/9sflVW V+xHtpXEr6hHiBLejrxoahUD1ljdYOroeADRnO0td6DVdCwQDVs1MlcoDGzfSLM9 9PKwhsCEUDWXW72AZMym8P/sng8LzFffLJx8m71aMTHAGLiLGCis3aUxiDtqNWNG kx9Ouc1fGXLVm2WmKGDPF1QphAH03zhZIzqaPjNJfZoqZVPmnsIpjTbmRFjCZFbv l3R/Ys9O1gBarO1USww4kRsBGYhRbWHZKiPbL0iZ4T5cSiAiu9i2584opdE+Z0ty OXsrAMTZPXmkwOVguypjPA+H77Hk4+/ACO2RVnOJ1Ois5qeVSDdPaOPdbq1pw7mn 3WJtgyO5bfHqrniRQsAi5K2uDlL19hHc//R8lwZA2mRF23Tz/UkiCXnEkzxlAM03 3UI7lkJvp1umK1fMZwG6sDwxj+jQ17p6M+S9LinA1vnVxK7ucLRf05IehlZHYUx0 R6SoAhHauxjx4ZKYwB0cGpKGvwSmXCFRy/zsNdeawgjuCJKIAgPKXd0HoNkH9VoA eJ+qVopj9xZSHrrgkhRKKggig91/24STwzgVjhdY16cXZgYL+iN6+epXItGd6IZK xx0cCYarDMTPjWcICwdM4krKE/boshX9e/Ts05RQv1W4TwQ08eA8Ro5JhQDGRz4L Tb5gC7Wnpi0sCvyicxeD =G9vX -----END PGP SIGNATURE----- Merge tag 'renesas-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.14" from Simon Horman: * Use newly added Gen-3 fallback compat string This is consistent with ongoing efforts to use per-generation fallback strings where appropriate across devices found on R-Car SoCs. The aim of the effort being to strike a balance between the limited information available about the compatibility of devices found on different SoCs and the desire to ease enabling devices on new SoCs. This has no run-time effect due to the presence of a per-SoC compat string. * Enable second CPU core on RZ/G1M (r8a7743) The RZ/G1M has two CA15 cores running at up to 1.5GHz * Enable frequency scaling on RZ/G1M (r8a7743) * Add six I2C cores to RZ/G1M (r8a7743) SoC DT This is a step towards enabling these cores on boards that use this SoC * Add CEC clock for HDMI transmitter to R-Car M2-W (r8a7791) Koelsch Hans Verkuil says "The adv7511 on the Koelsch board has a 12 MHz fixed clock for the CEC block. Specify this in the dts to enable CEC support." * Add PFC support to RZ/G1E (r8a7745) SoC and add Ethernet and SCIF2 pins to SK-RZG1E board. This allows the kernel to control multiplexed pins for Ethernet and SCIF2 rather than relying on setup inherited at boot. * tag 'renesas-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r8a7791: Use R-Car SATA Gen2 fallback compat string ARM: dts: r8a7790: Use R-Car SATA Gen2 fallback compat string ARM: dts: r8a7743: Add OPP table for frequency scaling ARM: dts: r8a7743: Add APMU node and second CPU core ARM: dts: koelsch: Add CEC clock for HDMI transmitter ARM: dts: sk-rzg1e: add Ether pins ARM: dts: sk-rzg1e: add SCIF2 pins ARM: dts: r8a7745: add PFC support ARM: dts: r8a7743: Add I2C DT support |
||
|---|---|---|
| .. | ||
| boot | ||
| common | ||
| configs | ||
| crypto | ||
| firmware | ||
| include | ||
| kernel | ||
| kvm | ||
| lib | ||
| mach-actions | ||
| mach-alpine | ||
| mach-artpec | ||
| mach-asm9260 | ||
| mach-aspeed | ||
| mach-at91 | ||
| mach-axxia | ||
| mach-bcm | ||
| mach-berlin | ||
| mach-clps711x | ||
| mach-cns3xxx | ||
| mach-davinci | ||
| mach-digicolor | ||
| mach-dove | ||
| mach-ebsa110 | ||
| mach-efm32 | ||
| mach-ep93xx | ||
| mach-exynos | ||
| mach-footbridge | ||
| mach-gemini | ||
| mach-highbank | ||
| mach-hisi | ||
| mach-imx | ||
| mach-integrator | ||
| mach-iop13xx | ||
| mach-iop32x | ||
| mach-iop33x | ||
| mach-ixp4xx | ||
| mach-keystone | ||
| mach-ks8695 | ||
| mach-lpc18xx | ||
| mach-lpc32xx | ||
| mach-mediatek | ||
| mach-meson | ||
| mach-mmp | ||
| mach-moxart | ||
| mach-mv78xx0 | ||
| mach-mvebu | ||
| mach-mxs | ||
| mach-netx | ||
| mach-nomadik | ||
| mach-nspire | ||
| mach-omap1 | ||
| mach-omap2 | ||
| mach-orion5x | ||
| mach-oxnas | ||
| mach-picoxcell | ||
| mach-prima2 | ||
| mach-pxa | ||
| mach-qcom | ||
| mach-realview | ||
| mach-rockchip | ||
| mach-rpc | ||
| mach-s3c24xx | ||
| mach-s3c64xx | ||
| mach-s5pv210 | ||
| mach-sa1100 | ||
| mach-shmobile | ||
| mach-socfpga | ||
| mach-spear | ||
| mach-sti | ||
| mach-stm32 | ||
| mach-sunxi | ||
| mach-tango | ||
| mach-tegra | ||
| mach-u300 | ||
| mach-uniphier | ||
| mach-ux500 | ||
| mach-versatile | ||
| mach-vexpress | ||
| mach-vt8500 | ||
| mach-w90x900 | ||
| mach-zx | ||
| mach-zynq | ||
| mm | ||
| net | ||
| nwfpe | ||
| oprofile | ||
| plat-iop | ||
| plat-omap | ||
| plat-orion | ||
| plat-pxa | ||
| plat-samsung | ||
| plat-versatile | ||
| probes | ||
| tools | ||
| vdso | ||
| vfp | ||
| xen | ||
| Kconfig | ||
| Kconfig-nommu | ||
| Kconfig.debug | ||
| Makefile | ||