Andrew F. Davis 81f517270d iio: health/afe440x: Always use separate gain values ... Locking the two gain stages to the same setting adds no value for us, so initialize them as unlocked and remove the sysfs for unlocking them. This also allows us to greatly simplify showing and setting the gain registers. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2016-05-04 11:02:39 +01:00
..
accel	iio: accel: Add support for Freescale MMA7660FC	2016-05-04 10:44:17 +01:00
adc	iio: mxs-lradc: disable only masked channels in mxs_lradc_hw_stop	2016-05-04 10:44:28 +01:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio: buffer-dmaengine: Use dmaengine_terminate_sync()	2016-02-09 21:05:17 +00:00
chemical	iio: convert to common i2c_check_functionality() return value	2016-02-27 17:17:43 +00:00
common	iio: st_sensors: support open drain mode	2016-04-19 19:58:13 +01:00
dac	iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs	2016-04-10 14:29:06 +01:00
dummy	Second set of IIO new drivers, functionality and cleanups for the 4.5 cycle.	2015-12-26 17:03:33 -08:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: st_gyro: Add lsm9ds0-gyro support	2016-04-23 22:47:18 +01:00
health	iio: health/afe440x: Always use separate gain values	2016-05-04 11:02:39 +01:00
humidity	iio: humidity: Add triggered buffer support for AM2315	2016-04-24 10:00:20 +01:00
imu	imu: bmi160: Add avail frequency and scale attributes	2016-05-04 10:51:39 +01:00
light	max44000: Initial triggered buffer support	2016-04-24 10:24:08 +01:00
magnetometer	iio: ak8975: Support adapters limited to BYTE_DATA	2016-05-01 17:54:38 +01:00
orientation	iio: orientation: hid-sensor-rotation: Fix memory leak in probe()	2015-05-17 09:10:25 +01:00
potentiometer	iio: potentiometer: add driver for Maxim Integrated DS1803	2016-04-10 12:34:09 +01:00
pressure	iio: pressure: bmp280: add ability to control oversampling rate	2016-04-25 19:05:29 +01:00
proximity	iio: convert to common i2c_check_functionality() return value	2016-02-27 17:17:43 +00:00
temperature	iio: convert to common i2c_check_functionality() return value	2016-02-27 17:17:43 +00:00
trigger	iio: trigger: Introduce IIO hrtimer based trigger	2015-12-03 18:19:27 +00:00
iio_core_trigger.h
iio_core.h	iio: Move buffer registration to the core	2014-12-12 12:28:31 +00:00
industrialio-buffer.c	iio: Add helper function for calculating scan index storage size	2016-02-06 18:21:35 +00:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio:core: mounting matrix support	2016-04-23 22:13:05 +01:00
industrialio-event.c	iio: event: Remove negative error code from iio_event_poll	2015-08-12 19:26:39 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: core: Add devm_ APIs for iio_channel_{get,release}_all	2016-04-19 19:58:15 +01:00
Kconfig	iio: light: add MAX30100 oximeter driver support	2015-12-12 12:14:37 +00:00
Makefile	iio: light: add MAX30100 oximeter driver support	2015-12-12 12:14:37 +00:00