Linus Torvalds 8148c17b17 This is the bulk of the GPIO changes for the v5.2 kernel cycle: ... Core changes: - The gpiolib MMIO driver has been enhanced to handle two direction registers, i.e. one register to set lines as input and one register to set lines as output. It turns out some silicon engineer thinks the ability to configure a line as input and output at the same time makes sense, this can be debated but includes a lot of analog electronics reasoning, and the registers are there and need to be handled consistently. Unsurprisingly, we enforce the lines to be either inputs or outputs in such schemes. - Send in the proper argument value to .set_config() dispatched to the pin control subsystem. Nobody used it before, now someone does, so fix it to work as expected. - The ACPI gpiolib portions can now handle pin bias setting (pull up or pull down). This has been in the ACPI spec for years and we finally have it properly integrated with Linux GPIOs. It was based on an observation from Andy Schevchenko that Thomas Petazzoni's changes to the core for biasing the PCA950x GPIO expander actually happen to fit hand-in-glove with what the ACPI core needed. Such nice synergies happen sometimes. New drivers: - A new driver for the Mellanox BlueField GPIO controller. This is using 64bit MMIO registers and can configure lines as inputs and outputs at the same time and after improving the MMIO library we handle it just fine. Interesting. - A new IXP4xx proper gpiochip driver with hierarchical interrupts should be coming in from the ARM SoC tree as well. Driver enhancements: - The PCA053x driver handles the CAT9554 GPIO expander. - The PCA053x driver handles the NXP PCAL6416 GPIO expander. - Wake-up support on PCA053x GPIO lines. - OMAP now does a nice asynchronous IRQ handling on wake-ups by letting everything wake up on edges, and this makes runtime PM work as expected too. Misc: - Several cleanups such as devres fixes. - Get rid of some languager comstructs that cause problems when compiling with LLVMs clang. - Documentation review and update. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJc1olZAAoJEEEQszewGV1zEU4P/RmTf3hG8xmNPS3MDTmR6gAy /YJOXjXBf3CD/dmEAyyaNLnUQismrtRNvHSoEGbno7gkU+htzp9UfUJkj6+HIXs2 RpF+Hi78HzZNDxGWuBLu6OZolpmBtx+sRKOhHk/XfNS45qd1FgXWDuulzsYa9Xsr hYMXdtdv9wY/vcc68q1rtKAbzlu5ZNCa3Zj1iNOr/XQt3Nl2BW66hGLgjK4mOvgx fJy4rFXuDIMfDvo69U1Opz2b39sfE7XMhfZS/MOgg4yEV9zGRgDoI1tyMcTqGb8Q 8LQbp5dXkP+3dJQB8tgbu3Vk4WC1Rd/pmIli5sMgsk0HYQ6XegfT6HJKozSmwN9r 0s8jKlrocWZvdPo1aJwQgtRS56t2rFWcrcRye8bLqxkkW5cYIq9CwkE8USwB31Kv PFpoOwRuCtj0gkCxf7WIEcC5NAkYPow3K1KPdk3E0Si6I3pj0NqqlaAD0JAlkC2V aPq3xbTuFCAdmcADEt2Z+dUJ7WIs5Y9oQgosMAx+A2AD4K3QDBMu3pZsT6SCu4XZ mK0eWJi9/CvOj/s7bA0BEJVxQA+p8KYsNRBOULg/8aAOqGcLnSydQjqrxDTE8YrL xmmRG7i7ht0B9CchZuIB5hqdvjbCgvcVa5OnCUDfLxE0GdCx8iJ9y9OrsMXbabYq 8FcPDo1N38cTYLnLqvKI =rhto -----END PGP SIGNATURE----- Merge tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio updates from Linus Walleij: "This is the bulk of the GPIO changes for the v5.2 kernel cycle. A bit later than usual because I was ironing out my own mistakes. I'm holding some stuff back for the next kernel as a result, and this should be a healthy and well tested batch. Core changes: - The gpiolib MMIO driver has been enhanced to handle two direction registers, i.e. one register to set lines as input and one register to set lines as output. It turns out some silicon engineer thinks the ability to configure a line as input and output at the same time makes sense, this can be debated but includes a lot of analog electronics reasoning, and the registers are there and need to be handled consistently. Unsurprisingly, we enforce the lines to be either inputs or outputs in such schemes. - Send in the proper argument value to .set_config() dispatched to the pin control subsystem. Nobody used it before, now someone does, so fix it to work as expected. - The ACPI gpiolib portions can now handle pin bias setting (pull up or pull down). This has been in the ACPI spec for years and we finally have it properly integrated with Linux GPIOs. It was based on an observation from Andy Schevchenko that Thomas Petazzoni's changes to the core for biasing the PCA950x GPIO expander actually happen to fit hand-in-glove with what the ACPI core needed. Such nice synergies happen sometimes. New drivers: - A new driver for the Mellanox BlueField GPIO controller. This is using 64bit MMIO registers and can configure lines as inputs and outputs at the same time and after improving the MMIO library we handle it just fine. Interesting. - A new IXP4xx proper gpiochip driver with hierarchical interrupts should be coming in from the ARM SoC tree as well. Driver enhancements: - The PCA053x driver handles the CAT9554 GPIO expander. - The PCA053x driver handles the NXP PCAL6416 GPIO expander. - Wake-up support on PCA053x GPIO lines. - OMAP now does a nice asynchronous IRQ handling on wake-ups by letting everything wake up on edges, and this makes runtime PM work as expected too. Misc: - Several cleanups such as devres fixes. - Get rid of some languager comstructs that cause problems when compiling with LLVMs clang. - Documentation review and update" * tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits) gpio: Update documentation docs: gpio: convert docs to ReST and rename to *.rst gpio: sch: Remove write-only core_base gpio: pxa: Make two symbols static gpiolib: acpi: Respect pin bias setting gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper gpiolib: acpi: Set pin value, based on bias, more accurately gpiolib: acpi: Change type of dflags gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT gpiolib: Make use of enum gpio_lookup_flags consistent gpiolib: Indent entry values of enum gpio_lookup_flags gpio: pca953x: add support for pca6416 dt-bindings: gpio: pca953x: document the nxp,pca6416 gpio: pca953x: add pcal6416 to the of_device_id table gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup tracing: stop making gpio tracing configurable gpio: pca953x: Configure wake-up path when wake-up is enabled gpio: of: Optimize quirk checks gpio: mmio: Drop bgpio_dir_inverted ...		2019-05-11 10:54:43 -04:00
..
aspeed.h	gpio: aspeed: Add interfaces for co-processor to grab GPIOs	2018-07-02 16:10:15 +02:00
consumer.h	This is the bulk of GPIO changes for the v4.21 kernel series:	2018-12-28 20:00:21 -08:00
driver.h	This is the bulk of the GPIO changes for the v5.2 kernel cycle:	2019-05-11 10:54:43 -04:00
gpio-reg.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
machine.h	gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT	2019-04-23 10:55:10 +02:00