linux_dsm_epyc7002/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
Ben Dooks 50f430e3ad ARM: S3C: Fix Simtec copyright statements in Documentation/S3C24XX
The (c) alone is not a sufficient copyright statement, nor is it a
good replacement for the proper encircled © symbol [1]. Add the
word copyright to the apropriate places and remove the (c) symbol.

[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
    section 4 'What does a notice consist of?'

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:33:50 +00:00

59 lines
1.4 KiB
Plaintext

Simtec Electronics EB2410ITX (BAST)
===================================
http://www.simtec.co.uk/products/EB2410ITX/
Introduction
------------
The EB2410ITX is a S3C2410 based development board with a variety of
peripherals and expansion connectors. This board is also known by
the shortened name of Bast.
Configuration
-------------
To set the default configuration, use `make bast_defconfig` which
supports the commonly used features of this board.
Support
-------
Official support information can be found on the Simtec Electronics
website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
Useful links:
- Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
- Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
- Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
MTD
---
The NAND and NOR support has been merged from the linux-mtd project.
Any problems, see http://www.linux-mtd.infradead.org/ for more
information or up-to-date versions of linux-mtd.
IDE
---
Both onboard IDE ports are supported, however there is no support for
changing speed of devices, PIO Mode 4 capable drives should be used.
Maintainers
-----------
This board is maintained by Simtec Electronics.
Copyright 2004 Ben Dooks, Simtec Electronics