Linus Torvalds bc9d8c20ff This is the big bulk of pin control changes for the ... v4.4 kernel development cycle: Infrastructure: - Doug Anderson wrote a patch adding an "init" state different from the "default" state for pin control state handling in the core framework. This is applied before the driver's probe() call if defined and takes precedence over "default". If both are defined, "init" will be applied *before* probe() and "default" will be applied *after* probe(). Significant subdriver improvements: - SH PFC is switched to getting GPIO ranges from the device tree ranges property on DT platforms. - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized. - Got rid of SH PFC hardcoded IRQ numbers. - Allwinner sunxi external interrupt through the "r" controller. - Moved the Cygnus driver to use DT-provided GPIO ranges. New drivers: - Atmel PIO4 pin controller for the SAMA4D2 family New subdrivers: - Rockchip RK3036 subdriver - Renesas SH PFC R8A7795 subdriver - Allwinner sunxi A83T PIO subdriver - Freescale i.MX7d iomux lpsr subdriver - Marvell Berlin BG4CT subdriver - SiRF Atlas 7 step B SoC subdriver - Intel Broxton SoC subdriver Apart from this, the usual slew if syntactic and semantic fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWNzaFAAoJEEEQszewGV1zth0QAIWBhrEFeZNw3yewSwtawBin Q+5hxxld7YWeYykK/phRw+nru+tRmRKd72uZbiA/OHDFmXdlF7ecQC+D2ByAT/a3 /d61BPtuT0tzmiZTmYSdbivBZzXjs9UrbEsGe2MXgf2WJuzZU/2EiQwCxklDfiX6 BWa0lcL9+ikVRh53xGoEps/5KVOkXSlPDq/twXp6Trd6B1k+opPqKHf7UNxb0BvK 0QoNPDYBTb93Z9iIItQdAGNCD/JMllywpUcqK+tPdQoRdrqlAcdRlUdXI7rdtvGw O3O2/MTBrGI7pxCNxBPGi9+niM6qtLrwKeQx8iIe0ieTIrUCCdg3vftUXctxXHkC +GxKLQGO/aMqW/4O8J+voAOD5HiGc+heoJsQEWoysoooWos/IxVJiiCKy5RNTk7g ECbzQvu7kbwTnwNXbxAc5ocdwhQ6HpJe2X2S52zTpDscfK8HcOow0hmf9m2EI4hV ikf47WJQIN9zunJloiJ3oZveK0Eytx1hH/47gcFRwr0KV/DK0KngvxnPWlB2nzlc pggkVnkHXczCyqBfDhZomILnTK2aDt6RKUZhz4w1s8ezK2EDn8Vvt3Qm7wOIeWvR xiY7XVoO+AYOywuFsbNxkt28Y8h5yQxu/AV6/rYSn+NYCZcLxKbcrVEiY2N6ecCA x74epIdnjA8F7S3Xp14q =0t3B -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the big bulk of pin control changes for the v4.4 kernel development cycle. Development pace is high in pin control again this merge window. 28 contributors, 83 patches. It hits a few sites outside the pin control subsystem: - Device tree bindings in Documentation (as usual) - MAINTAINERS - drivers/base/* for the "init" state handling by Doug Anderson. This has been ACKed by Greg. - drivers/usb/renesas_usbhs/rcar2.c, for a dependent Renesas change in the USB subsystem. This has been ACKed by both Greg and Felipe. - arch/arm/boot/dts/sama5d2.dtsi - this should ideally have gone through the ARM SoC tree but ended up here. This time I am using Geert Uytterhoeven as submaintainer for SH PFC since the are three-four people working in parallel with new Renesas ASICs. Summary of changes: Infrastructure: - Doug Anderson wrote a patch adding an "init" state different from the "default" state for pin control state handling in the core framework. This is applied before the driver's probe() call if defined and takes precedence over "default". If both are defined, "init" will be applied *before* probe() and "default" will be applied *after* probe(). Significant subdriver improvements: - SH PFC is switched to getting GPIO ranges from the device tree ranges property on DT platforms. - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized. - Got rid of SH PFC hardcoded IRQ numbers. - Allwinner sunxi external interrupt through the "r" controller. - Moved the Cygnus driver to use DT-provided GPIO ranges. New drivers: - Atmel PIO4 pin controller for the SAMA4D2 family New subdrivers: - Rockchip RK3036 subdriver - Renesas SH PFC R8A7795 subdriver - Allwinner sunxi A83T PIO subdriver - Freescale i.MX7d iomux lpsr subdriver - Marvell Berlin BG4CT subdriver - SiRF Atlas 7 step B SoC subdriver - Intel Broxton SoC subdriver Apart from this, the usual slew if syntactic and semantic fixes" * tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (81 commits) pinctrl: pinconf: remove needless loop pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER pinctrl: zynq: fix UTF-8 errors pinctrl: zynq: Initialize early pinctrl: at91: add missing of_node_put pinctrl: tegra-xusb: Correct lane mux options pinctrl: intel: Add Intel Broxton pin controller support pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt drivers/pinctrl: Add the concept of an "init" state pinctrl: uniphier: set input-enable before pin-muxing pinctrl: cygnus: Add new compatible string for gpio controller driver pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver pinctrl: cygnus: Optional DT property to support pin mappings pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h> usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h> ...		2015-11-02 12:30:39 -08:00
..
common.c
common.h
fifo.c
fifo.h
Kconfig
Makefile
mod_gadget.c
mod_host.c
mod.c
mod.h
pipe.c
pipe.h
rcar2.c
rcar2.h