mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 12:19:08 +07:00
67c29a81c2
With the SION bit set a pin can be read as GPIO even though it's not muxed as GPIO. This is useful at times. The downside however is that the signal is not only routed to the GPIO IP but also all other IPs that can make use of the pin. This resulted in more than one issue for me in the past. Things like spi transfers that result in usb reenumeration or setting a GPIO to a value that triggers an RTS irq for an UART. This convinces me that the SION bit does more harm than good and so all SION bits are removed that are not known to be needed. Note that this has no influence on GPIOs under Linux as the gpio-mxc driver just reports the level the pin is driven to for outputs and not the level as seen on the pin. If this commit introduces a regression for you, please report which SION bit is essential for your setup. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
606 lines
28 KiB
C
606 lines
28 KiB
C
/*
|
|
* Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
|
|
* Based on imx35-pinfunc.h in the same directory Which is:
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#ifndef __DTS_IMX25_PINFUNC_H
|
|
#define __DTS_IMX25_PINFUNC_H
|
|
|
|
/*
|
|
* The pin function ID is a tuple of
|
|
* <mux_reg conf_reg input_reg mux_mode input_val>
|
|
*/
|
|
|
|
#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
|
|
|
|
#define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000
|
|
#define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000
|
|
#define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000
|
|
|
|
#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x00 0x000
|
|
#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x05 0x000
|
|
#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x06 0x000
|
|
#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x07 0x000
|
|
|
|
#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x00 0x000
|
|
#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x05 0x000
|
|
#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x06 0x000
|
|
#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x07 0x000
|
|
|
|
#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x05 0x000
|
|
#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x06 0x000
|
|
#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x07 0x000
|
|
|
|
#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x00 0x000
|
|
#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x05 0x000
|
|
#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x06 0x000
|
|
#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x07 0x000
|
|
|
|
#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x00 0x000
|
|
#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x05 0x000
|
|
#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x06 0x000
|
|
#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x07 0x000
|
|
|
|
#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x00 0x000
|
|
#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x05 0x000
|
|
#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x06 0x000
|
|
#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x07 0x000
|
|
|
|
#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x00 0x000
|
|
#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x05 0x000
|
|
#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x06 0x000
|
|
#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x07 0x000
|
|
|
|
#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x00 0x000
|
|
#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x05 0x000
|
|
#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x06 0x000
|
|
#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x07 0x000
|
|
|
|
#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x05 0x000
|
|
#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000
|
|
#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x06 0x000
|
|
#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000
|
|
|
|
#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x00 0x000
|
|
#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x05 0x000
|
|
#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x06 0x000
|
|
#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x07 0x000
|
|
|
|
#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x00 0x000
|
|
#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x05 0x000
|
|
#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x06 0x000
|
|
#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x07 0x000
|
|
|
|
#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x00 0x000
|
|
#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x05 0x000
|
|
#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x07 0x000
|
|
|
|
#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x00 0x000
|
|
#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x04 0x000
|
|
#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000
|
|
#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000
|
|
#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x00 0x000
|
|
#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x04 0x000
|
|
#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CS0__CS0 0x04c 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_CS0__GPIO_4_2 0x04c 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CS1__CS1 0x050 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_CS1__NF_CE3 0x050 0x000 0x000 0x01 0x000
|
|
#define MX25_PAD_CS1__GPIO_4_3 0x050 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x00 0x000
|
|
#define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000
|
|
#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x03 0x000
|
|
#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x00 0x000
|
|
#define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000
|
|
#define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x03 0x000
|
|
#define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000
|
|
#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000
|
|
#define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x03 0x000
|
|
#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000
|
|
#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000
|
|
#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x00 0x000
|
|
#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x04 0x000
|
|
#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x00 0x000
|
|
#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000
|
|
#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000
|
|
#define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000
|
|
#define MX25_PAD_D15__SDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000
|
|
|
|
#define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000
|
|
#define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000
|
|
#define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000
|
|
#define MX25_PAD_D14__SDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000
|
|
|
|
#define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000
|
|
#define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000
|
|
#define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000
|
|
#define MX25_PAD_D13__SDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000
|
|
|
|
#define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000
|
|
#define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000
|
|
#define MX25_PAD_D12__SDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000
|
|
|
|
#define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000
|
|
#define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000
|
|
#define MX25_PAD_D11__USBOTG_PWR 0x098 0x290 0x000 0x06 0x000
|
|
|
|
#define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000
|
|
#define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000
|
|
#define MX25_PAD_D10__USBOTG_OC 0x09c 0x294 0x57c 0x06 0x000
|
|
|
|
#define MX25_PAD_D9__D9 0x0a0 0x298 0x000 0x00 0x000
|
|
#define MX25_PAD_D9__GPIO_4_11 0x0a0 0x298 0x000 0x05 0x000
|
|
#define MX25_PAD_D9__USBH2_PWR 0x0a0 0x298 0x000 0x06 0x000
|
|
|
|
#define MX25_PAD_D8__D8 0x0a4 0x29c 0x000 0x00 0x000
|
|
#define MX25_PAD_D8__GPIO_4_12 0x0a4 0x29c 0x000 0x05 0x000
|
|
#define MX25_PAD_D8__USBH2_OC 0x0a4 0x29c 0x580 0x06 0x000
|
|
|
|
#define MX25_PAD_D7__D7 0x0a8 0x2a0 0x000 0x00 0x000
|
|
#define MX25_PAD_D7__GPIO_4_13 0x0a8 0x2a0 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_D6__D6 0x0ac 0x2a4 0x000 0x00 0x000
|
|
#define MX25_PAD_D6__GPIO_4_14 0x0ac 0x2a4 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_D5__D5 0x0b0 0x2a8 0x000 0x00 0x000
|
|
#define MX25_PAD_D5__GPIO_4_15 0x0b0 0x2a8 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_D4__D4 0x0b4 0x2ac 0x000 0x00 0x000
|
|
#define MX25_PAD_D4__GPIO_4_16 0x0b4 0x2ac 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_D3__D3 0x0b8 0x2b0 0x000 0x00 0x000
|
|
#define MX25_PAD_D3__GPIO_4_17 0x0b8 0x2b0 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_D2__D2 0x0bc 0x2b4 0x000 0x00 0x000
|
|
#define MX25_PAD_D2__GPIO_4_18 0x0bc 0x2b4 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_D1__D1 0x0c0 0x2b8 0x000 0x00 0x000
|
|
#define MX25_PAD_D1__GPIO_4_19 0x0c0 0x2b8 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_D0__D0 0x0c4 0x2bc 0x000 0x00 0x000
|
|
#define MX25_PAD_D0__GPIO_4_20 0x0c4 0x2bc 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x00 0x000
|
|
#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x02 0x000
|
|
#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x00 0x000
|
|
#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x02 0x000
|
|
#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x00 0x000
|
|
#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x00 0x000
|
|
#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x00 0x000
|
|
#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x00 0x000
|
|
#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x00 0x000
|
|
#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x00 0x000
|
|
#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x00 0x000
|
|
#define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x02 0x000
|
|
#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x05 0x000
|
|
#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000
|
|
|
|
#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x00 0x000
|
|
#define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x02 0x000
|
|
#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x05 0x001
|
|
#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000
|
|
|
|
#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x00 0x000
|
|
#define MX25_PAD_LD10__UART4_RTS 0x0f0 0x2e8 0x56c 0x02 0x000
|
|
#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x05 0x001
|
|
|
|
#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x00 0x000
|
|
#define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x02 0x000
|
|
#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x05 0x001
|
|
#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000
|
|
|
|
#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000
|
|
#define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000
|
|
#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x05 0x001
|
|
|
|
#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x00 0x000
|
|
#define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000
|
|
#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x00 0x000
|
|
#define MX25_PAD_LD14__CSPI2_SCLK 0x100 0x2f8 0x494 0x02 0x000
|
|
#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x00 0x000
|
|
#define MX25_PAD_LD15__CSPI2_RDY 0x104 0x2fc 0x498 0x02 0x000
|
|
#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x05 0x001
|
|
|
|
#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x00 0x000
|
|
#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x00 0x000
|
|
#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x00 0x000
|
|
#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x00 0x000
|
|
#define MX25_PAD_OE_ACD__CSPI2_SS0 0x114 0x30c 0x4a4 0x02 0x000
|
|
#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x00 0x000
|
|
#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x01 0x000
|
|
#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x04 0x000
|
|
#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x05 0x001
|
|
#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x06 0x000
|
|
|
|
#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x00 0x000
|
|
#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x05 0x000
|
|
#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x06 0x001
|
|
|
|
#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x01 0x001
|
|
#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000
|
|
#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x05 0x000
|
|
#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x07 0x000
|
|
|
|
#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x01 0x000
|
|
#define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000
|
|
#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x05 0x000
|
|
#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x07 0x001
|
|
|
|
#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x01 0x001
|
|
#define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000
|
|
#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x05 0x000
|
|
#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x07 0x000
|
|
|
|
#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x01 0x000
|
|
#define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000
|
|
#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x05 0x000
|
|
#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x07 0x000
|
|
|
|
#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x02 0x001
|
|
#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000
|
|
#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x02 0x001
|
|
#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x02 0x000
|
|
#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x05 0x000
|
|
#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x07 0x000
|
|
|
|
#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x02 0x000
|
|
#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x05 0x000
|
|
#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x07 0x000
|
|
|
|
#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x01 0x000
|
|
#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x02 0x001
|
|
#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x01 0x000
|
|
#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x02 0x001
|
|
#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x01 0x000
|
|
#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x02 0x001
|
|
#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x00 0x000
|
|
#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x01 0x000
|
|
#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x02 0x001
|
|
#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x00 0x000
|
|
#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x00 0x000
|
|
#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x00 0x000
|
|
#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x568 0x02 0x000
|
|
#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x00 0x000
|
|
#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x02 0x000
|
|
#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x00 0x000
|
|
#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x02 0x000
|
|
#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x00 0x000
|
|
#define MX25_PAD_CSPI1_SS1__I2C3_DAT 0x164 0x35C 0x528 0x01 0x001
|
|
#define MX25_PAD_CSPI1_SS1__UART3_RTS 0x164 0x35c 0x000 0x02 0x000
|
|
#define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x00 0x000
|
|
#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x02 0x000
|
|
#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x00 0x000
|
|
#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x00 0x000
|
|
#define MX25_PAD_UART1_RXD__UART2_DTR 0x170 0x368 0x000 0x03 0x000
|
|
#define MX25_PAD_UART1_RXD__GPIO_4_22 0x170 0x368 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_UART1_TXD__UART1_TXD 0x174 0x36c 0x000 0x00 0x000
|
|
#define MX25_PAD_UART1_TXD__UART2_DSR 0x174 0x36c 0x000 0x03 0x000
|
|
#define MX25_PAD_UART1_TXD__GPIO_4_23 0x174 0x36c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x00 0x000
|
|
#define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x01 0x001
|
|
#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x02 0x000
|
|
#define MX25_PAD_UART1_RTS__UART2_DCD 0x178 0x370 0x000 0x03 0x000
|
|
#define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x00 0x000
|
|
#define MX25_PAD_UART1_CTS__CSI_D1 0x17c 0x374 0x48c 0x01 0x001
|
|
#define MX25_PAD_UART1_CTS__UART2_RI 0x17c 0x374 0x000 0x03 0x001
|
|
#define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x00 0x000
|
|
#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x00 0x000
|
|
#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x00 0x000
|
|
#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x02 0x002
|
|
#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x03 0x000
|
|
#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x00 0x000
|
|
#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x02 0x002
|
|
#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x05 0x000
|
|
|
|
/*
|
|
* Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD
|
|
* card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
|
|
* Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
|
|
* bug that configuring the SD1_CMD function doesn't enable the input path for
|
|
* this pin.
|
|
* This might have side effects for other hardware units that are connected to
|
|
* that pin and use the respective function as input.
|
|
*/
|
|
#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000
|
|
#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x01 0x001
|
|
#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x02 0x002
|
|
#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x00 0x000
|
|
#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x01 0x001
|
|
#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x02 0x002
|
|
#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x00 0x000
|
|
#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x01 0x001
|
|
#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x00 0x000
|
|
#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x03 0x000
|
|
#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x00 0x000
|
|
#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x02 0x002
|
|
#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x00 0x000
|
|
#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x02 0x002
|
|
#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x00 0x000
|
|
#define MX25_PAD_KPP_ROW0__UART3_RXD 0x1a8 0x3a0 0x568 0x01 0x001
|
|
#define MX25_PAD_KPP_ROW0__UART1_DTR 0x1a8 0x3a0 0x000 0x04 0x000
|
|
#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x00 0x000
|
|
#define MX25_PAD_KPP_ROW1__UART3_TXD 0x1ac 0x3a4 0x000 0x01 0x000
|
|
#define MX25_PAD_KPP_ROW1__UART1_DSR 0x1ac 0x3a4 0x000 0x04 0x000
|
|
#define MX25_PAD_KPP_ROW1__GPIO_2_30 0x1ac 0x3a4 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x00 0x000
|
|
#define MX25_PAD_KPP_ROW2__UART3_RTS 0x1b0 0x3a8 0x000 0x01 0x000
|
|
#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x03 0x002
|
|
#define MX25_PAD_KPP_ROW2__UART1_DCD 0x1b0 0x3a8 0x000 0x04 0x000
|
|
#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x00 0x000
|
|
#define MX25_PAD_KPP_ROW3__UART3_CTS 0x1b4 0x3ac 0x000 0x01 0x000
|
|
#define MX25_PAD_KPP_ROW3__CSI_D1 0x1b4 0x3ac 0x48c 0x03 0x002
|
|
#define MX25_PAD_KPP_ROW3__UART1_RI 0x1b4 0x3ac 0x000 0x04 0x000
|
|
#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x00 0x000
|
|
#define MX25_PAD_KPP_COL0__UART4_RXD 0x1b8 0x3b0 0x570 0x01 0x001
|
|
#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x02 0x000
|
|
#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x00 0x000
|
|
#define MX25_PAD_KPP_COL1__UART4_TXD 0x1bc 0x3b4 0x000 0x01 0x000
|
|
#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x02 0x000
|
|
#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x00 0x000
|
|
#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x56c 0x01 0x001
|
|
#define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x02 0x000
|
|
#define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x00 0x000
|
|
#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x01 0x000
|
|
#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x02 0x000
|
|
#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x00 0x000
|
|
#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x02 0x001
|
|
#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x00 0x000
|
|
#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x02 0x001
|
|
#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x00 0x000
|
|
#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x00 0x000
|
|
#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x02 0x001
|
|
#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x00 0x000
|
|
#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x00 0x000
|
|
#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x00 0x000
|
|
/*
|
|
* According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
|
|
* 01/2011) this is CAN1_TX but that's wrong.
|
|
*/
|
|
#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x04 0x000
|
|
#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x00 0x000
|
|
/*
|
|
* According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
|
|
* 01/2011) this is CAN1_RX but that's wrong.
|
|
*/
|
|
#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x04 0x000
|
|
#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x00 0x000
|
|
#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x00 0x000
|
|
#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x01 0x000
|
|
#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000
|
|
#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x00 0x000
|
|
#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x06 0x000
|
|
#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x02 0x000
|
|
|
|
#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x00 0x000
|
|
#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x02 0x001
|
|
#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x06 0x001
|
|
|
|
#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x00 0x000
|
|
#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000
|
|
#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001
|
|
#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001
|
|
#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000
|
|
|
|
#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000
|
|
#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001
|
|
#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001
|
|
|
|
#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000
|
|
#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002
|
|
#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000
|
|
#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x04 0x000
|
|
#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x06 0x002
|
|
|
|
#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x00 0x000
|
|
#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000
|
|
#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x04 0x000
|
|
#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x06 0x000
|
|
|
|
#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x00 0x000
|
|
#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x04 0x000
|
|
#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x05 0x000
|
|
#define MX25_PAD_VSTBY_REQ__UART4_RTS 0x214 0x408 0x56c 0x06 0x002
|
|
|
|
#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x00 0x000
|
|
#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x00 0x000
|
|
#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x04 0x001
|
|
#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x05 0x000
|
|
#define MX25_PAD_POWER_FAIL__UART4_CTS 0x21c 0x410 0x000 0x06 0x000
|
|
|
|
#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x00 0x000
|
|
#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000
|
|
|
|
#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000
|
|
#define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000
|
|
|
|
#endif /* __DTS_IMX25_PINFUNC_H */
|