linux_dsm_epyc7002/arch/arm/mach-omap2
stanley.miao 8098bb0d8c OMAP3: Fix a cpu type check problem
cpu_is_omap3517() and cpu_is_omap3505() are the subgroups of cpu_is_omap34xx(),
so we should check cpu_is_omap3517() and cpu_is_omap3505() first, then check
cpu_is_omap34xx().

Otherwise, All AM35XX (Sitara) clocks do not get registered and device drivers
(ti_hecc, etc...) that depend on those clocks are failing to get the clock and
end up with non working device.

Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-16 09:21:19 +03:00
..
include/mach omap: Fix DEBUG_LL uart to access phys addr when MMU isn't enable 2010-08-04 12:17:53 +03:00
board-2430sdp.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-3430sdp.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-3630sdp.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-4430sdp.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-am3517evm.c omap3: introduce omap3_map_io 2010-08-04 14:43:18 +03:00
board-apollon.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-cm-t35.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-devkit8000.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-flash.c omap3 flash: rename board-sdp-flash.c to be use by other boards 2010-08-02 15:43:29 +03:00
board-generic.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-h4.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-igep0020.c omap3: introduce omap3_map_io 2010-08-04 14:43:18 +03:00
board-ldp.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-n8x0.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-omap3beagle.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-omap3evm.c Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux 2010-08-08 10:02:59 -07:00
board-omap3pandora.c omap: pandora: pass wl1251 information to SDIO core 2010-08-11 08:59:04 -07:00
board-omap3stalker.c omap3: introduce omap3_map_io 2010-08-04 14:43:18 +03:00
board-omap3touchbook.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-omap4panda.c omap4: Add OMAP4 Panda Support 2010-08-02 13:18:05 +03:00
board-overo.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-rx51-peripherals.c Merge branch 'devel-misc' into omap-for-linus 2010-08-02 14:23:38 +03:00
board-rx51-sdram.c omap3: rx51: Add SDRAM init 2009-11-22 10:24:33 -08:00
board-rx51-video.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
board-rx51.c omap3: Unify omap2_set_globals_3[43,6x]x functions 2010-08-04 14:43:18 +03:00
board-zoom2.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-zoom3.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-zoom-debugboard.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
board-zoom-peripherals.c omap3: zoom2/3 / 3630sdp: Don't init always all uarts 2010-03-15 16:34:17 -05:00
clkt2xxx_apll.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clkt2xxx_dpllcore.c OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c 2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c 2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c 2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y 2010-05-20 12:31:14 -06:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clkt_dpll.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx_data.c OMAP3: Fix a cpu type check problem 2010-08-16 09:21:19 +03:00
clock3xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: clock: Fix multi-omap boot with reset un-used clocks 2010-06-16 19:01:33 +03:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock2430_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock2430.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3517.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clock.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clock.h OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clockdomain.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clockdomains44xx.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
clockdomains.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
cm4xxx.c OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
cm44xx.h OMAP4: PRCM: Add offset defines for all CM registers 2010-05-20 12:31:12 -06:00
cm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
cm-regbits-34xx.h OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
cm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
cm.c OMAP24xx: CM: fix mask used for checking IDLEST status 2010-07-26 16:34:28 -06:00
cm.h OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
control.c OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
cpuidle34xx.c OMAP3: cpuidle: Add valid field into C-state parameter passing 2010-02-23 11:05:02 -08:00
devices.c Merge branch 'v2.6.35-omap-mailbox-for-next' of git://gitorious.org/~doyu/lk/mainline into omap-for-linus 2010-08-04 16:10:38 +03:00
dpll3xxx.c fix typos concerning "hierarchy" 2010-06-16 18:03:14 +02:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpmc-nand.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
gpmc-onenand.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
hsmmc.c omap: pandora: pass wl1251 information to SDIO core 2010-08-11 08:59:04 -07:00
hsmmc.h omap: pandora: pass wl1251 information to SDIO core 2010-08-11 08:59:04 -07:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c omap3: id: fix 3630 rev detection 2010-08-16 09:21:19 +03:00
io.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
iommu2.c omap iommu: move iommu_disable at fault to the above layer 2010-06-29 07:55:07 +03:00
irq.c OMAP2/3: IRQ: ensure valid base address 2010-02-03 08:48:06 -08:00
Kconfig omap4: Add OMAP4 Panda Support 2010-08-02 13:18:05 +03:00
mailbox.c omap: mailbox: reorganize headers 2010-08-04 15:50:20 +03:00
Makefile Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-08-04 08:46:24 +03:00
Makefile.boot [ARM] 3145/1: OMAP 3a/5: Add support for omap24xx 2005-11-10 14:26:51 +00:00
mcbsp.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-08-08 10:01:46 -07:00
mux34xx.c omap: mux: Remove unncessary parens from mux34xx.c 2010-07-05 16:31:36 +03:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux2420.c omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux.c omap: mux: fix multipath gpio handling 2010-08-02 14:23:07 +03:00
mux.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
omap4-common.c omap4: Move SOC specific code from board file 2010-05-20 11:17:51 -07:00
omap44xx-smc.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap_hwmod_3xxx_data.c OMAP3: hwmod data: add data for OMAP3 IVA2 2010-07-26 16:34:32 -06:00
omap_hwmod_2420_data.c OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods 2010-07-26 16:34:33 -06:00
omap_hwmod_2430_data.c OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods 2010-07-26 16:34:33 -06:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod.c OMAP2+: hwmod/device: update documentation and copyright 2010-07-26 16:34:33 -06:00
omap-headsmp.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap-hotplug.c omap4: hotplug: Add basic CPU hotplug support 2010-08-02 13:18:19 +03:00
omap-iommu.c omap iommu: update ducati mmu irq define name 2010-06-29 07:55:08 +03:00
omap-smp.c omap4: hotplug: Add basic CPU hotplug support 2010-08-02 13:18:19 +03:00
opp2xxx.h omap2/3: Multiboot compile fixes to compile in omap2 and omap3 2010-02-15 09:26:55 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
pm24xx.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
pm34xx.c OMAP3: AM3505/3517 do not have IO wakeup capability 2010-08-02 14:21:40 +03:00
pm44xx.c omap4: suspend: Add basic system suspend support 2010-08-02 13:18:18 +03:00
pm-debug.c OMAP3: PM: Add milliseconds interface to suspend wakeup timer 2010-05-12 09:39:00 -07:00
pm.c OMAP: PM: create omap_devices for MPU, DSP, L3 2010-07-26 16:34:31 -06:00
pm.h OMAP3: PM: Add milliseconds interface to suspend wakeup timer 2010-05-12 09:39:00 -07:00
powerdomain.c OMAP2: powerdomain: Add break in switch statement 2010-08-03 10:21:07 +03:00
powerdomains24xx.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
powerdomains34xx.h omap: 3630: disable TLL SAR on 3630 ES1 2010-08-04 14:43:52 +03:00
powerdomains44xx.h OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains 2010-05-20 12:31:13 -06:00
powerdomains.h OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs 2010-01-29 10:14:23 -07:00
prcm-common.h OMAP4: PRCM: Remove duplicate definition of base addresses 2010-05-20 12:31:12 -06:00
prcm.c OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
prm44xx.h OMAP4: PRCM: Add offset defines for all PRM registers 2010-05-20 12:31:12 -06:00
prm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
prm-regbits-34xx.h OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
prm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
prm.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc2xxx.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
sdrc.h OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
serial.c omap2/3/4: serial: errata i202: fix for MDR1 access 2010-08-02 13:18:12 +03:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S fix typos concerning "acquire" 2010-06-16 18:03:15 +02:00
sram34xx.S OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig 2009-12-11 17:00:42 -07:00
sram242x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
sram243x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
timer-gp.c OMAP4: clock: Remove clock hacks from timer-gp.c 2010-02-24 17:45:17 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
usb-fs.c omap: mux: Make omap2 FS USB code use new mux functions 2010-07-05 16:31:38 +03:00
usb-musb.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
usb-tusb6010.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00