mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
5571415c96
bgmac_mii_register() and register_netdev() both return appropriate error codes for the failures they would encounter, propagate this error code instead of overriding the value with -ENOTSUPP which is not the correct error code to return. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1589 lines
42 KiB
C
1589 lines
42 KiB
C
/*
|
|
* Driver for (BCM4706)? GBit MAC core on BCMA bus.
|
|
*
|
|
* Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com>
|
|
*
|
|
* Licensed under the GNU/GPL. See COPYING for details.
|
|
*/
|
|
|
|
#include "bgmac.h"
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <bcm47xx_nvram.h>
|
|
|
|
static const struct bcma_device_id bgmac_bcma_tbl[] = {
|
|
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
|
|
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
|
|
BCMA_CORETABLE_END
|
|
};
|
|
MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl);
|
|
|
|
static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask,
|
|
u32 value, int timeout)
|
|
{
|
|
u32 val;
|
|
int i;
|
|
|
|
for (i = 0; i < timeout / 10; i++) {
|
|
val = bcma_read32(core, reg);
|
|
if ((val & mask) == value)
|
|
return true;
|
|
udelay(10);
|
|
}
|
|
pr_err("Timeout waiting for reg 0x%X\n", reg);
|
|
return false;
|
|
}
|
|
|
|
/**************************************************
|
|
* DMA
|
|
**************************************************/
|
|
|
|
static void bgmac_dma_tx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
|
|
{
|
|
u32 val;
|
|
int i;
|
|
|
|
if (!ring->mmio_base)
|
|
return;
|
|
|
|
/* Suspend DMA TX ring first.
|
|
* bgmac_wait_value doesn't support waiting for any of few values, so
|
|
* implement whole loop here.
|
|
*/
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL,
|
|
BGMAC_DMA_TX_SUSPEND);
|
|
for (i = 0; i < 10000 / 10; i++) {
|
|
val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
|
|
val &= BGMAC_DMA_TX_STAT;
|
|
if (val == BGMAC_DMA_TX_STAT_DISABLED ||
|
|
val == BGMAC_DMA_TX_STAT_IDLEWAIT ||
|
|
val == BGMAC_DMA_TX_STAT_STOPPED) {
|
|
i = 0;
|
|
break;
|
|
}
|
|
udelay(10);
|
|
}
|
|
if (i)
|
|
bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X (BGMAC_DMA_TX_STAT: 0x%08X)\n",
|
|
ring->mmio_base, val);
|
|
|
|
/* Remove SUSPEND bit */
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0);
|
|
if (!bgmac_wait_value(bgmac->core,
|
|
ring->mmio_base + BGMAC_DMA_TX_STATUS,
|
|
BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED,
|
|
10000)) {
|
|
bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n",
|
|
ring->mmio_base);
|
|
udelay(300);
|
|
val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
|
|
if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED)
|
|
bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n",
|
|
ring->mmio_base);
|
|
}
|
|
}
|
|
|
|
static void bgmac_dma_tx_enable(struct bgmac *bgmac,
|
|
struct bgmac_dma_ring *ring)
|
|
{
|
|
u32 ctl;
|
|
|
|
ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL);
|
|
if (bgmac->core->id.rev >= 4) {
|
|
ctl &= ~BGMAC_DMA_TX_BL_MASK;
|
|
ctl |= BGMAC_DMA_TX_BL_128 << BGMAC_DMA_TX_BL_SHIFT;
|
|
|
|
ctl &= ~BGMAC_DMA_TX_MR_MASK;
|
|
ctl |= BGMAC_DMA_TX_MR_2 << BGMAC_DMA_TX_MR_SHIFT;
|
|
|
|
ctl &= ~BGMAC_DMA_TX_PC_MASK;
|
|
ctl |= BGMAC_DMA_TX_PC_16 << BGMAC_DMA_TX_PC_SHIFT;
|
|
|
|
ctl &= ~BGMAC_DMA_TX_PT_MASK;
|
|
ctl |= BGMAC_DMA_TX_PT_8 << BGMAC_DMA_TX_PT_SHIFT;
|
|
}
|
|
ctl |= BGMAC_DMA_TX_ENABLE;
|
|
ctl |= BGMAC_DMA_TX_PARITY_DISABLE;
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl);
|
|
}
|
|
|
|
static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac,
|
|
struct bgmac_dma_ring *ring,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct device *dma_dev = bgmac->core->dma_dev;
|
|
struct net_device *net_dev = bgmac->net_dev;
|
|
struct bgmac_dma_desc *dma_desc;
|
|
struct bgmac_slot_info *slot;
|
|
u32 ctl0, ctl1;
|
|
int free_slots;
|
|
|
|
if (skb->len > BGMAC_DESC_CTL1_LEN) {
|
|
bgmac_err(bgmac, "Too long skb (%d)\n", skb->len);
|
|
goto err_stop_drop;
|
|
}
|
|
|
|
if (ring->start <= ring->end)
|
|
free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS;
|
|
else
|
|
free_slots = ring->start - ring->end;
|
|
if (free_slots == 1) {
|
|
bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n");
|
|
netif_stop_queue(net_dev);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
slot = &ring->slots[ring->end];
|
|
slot->skb = skb;
|
|
slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len,
|
|
DMA_TO_DEVICE);
|
|
if (dma_mapping_error(dma_dev, slot->dma_addr)) {
|
|
bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n",
|
|
ring->mmio_base);
|
|
goto err_stop_drop;
|
|
}
|
|
|
|
ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF;
|
|
if (ring->end == ring->num_slots - 1)
|
|
ctl0 |= BGMAC_DESC_CTL0_EOT;
|
|
ctl1 = skb->len & BGMAC_DESC_CTL1_LEN;
|
|
|
|
dma_desc = ring->cpu_base;
|
|
dma_desc += ring->end;
|
|
dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
|
|
dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
|
|
dma_desc->ctl0 = cpu_to_le32(ctl0);
|
|
dma_desc->ctl1 = cpu_to_le32(ctl1);
|
|
|
|
netdev_sent_queue(net_dev, skb->len);
|
|
|
|
wmb();
|
|
|
|
/* Increase ring->end to point empty slot. We tell hardware the first
|
|
* slot it should *not* read.
|
|
*/
|
|
if (++ring->end >= BGMAC_TX_RING_SLOTS)
|
|
ring->end = 0;
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX,
|
|
ring->index_base +
|
|
ring->end * sizeof(struct bgmac_dma_desc));
|
|
|
|
/* Always keep one slot free to allow detecting bugged calls. */
|
|
if (--free_slots == 1)
|
|
netif_stop_queue(net_dev);
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
err_stop_drop:
|
|
netif_stop_queue(net_dev);
|
|
dev_kfree_skb(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Free transmitted packets */
|
|
static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
|
|
{
|
|
struct device *dma_dev = bgmac->core->dma_dev;
|
|
int empty_slot;
|
|
bool freed = false;
|
|
unsigned bytes_compl = 0, pkts_compl = 0;
|
|
|
|
/* The last slot that hardware didn't consume yet */
|
|
empty_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
|
|
empty_slot &= BGMAC_DMA_TX_STATDPTR;
|
|
empty_slot -= ring->index_base;
|
|
empty_slot &= BGMAC_DMA_TX_STATDPTR;
|
|
empty_slot /= sizeof(struct bgmac_dma_desc);
|
|
|
|
while (ring->start != empty_slot) {
|
|
struct bgmac_slot_info *slot = &ring->slots[ring->start];
|
|
|
|
if (slot->skb) {
|
|
/* Unmap no longer used buffer */
|
|
dma_unmap_single(dma_dev, slot->dma_addr,
|
|
slot->skb->len, DMA_TO_DEVICE);
|
|
slot->dma_addr = 0;
|
|
|
|
bytes_compl += slot->skb->len;
|
|
pkts_compl++;
|
|
|
|
/* Free memory! :) */
|
|
dev_kfree_skb(slot->skb);
|
|
slot->skb = NULL;
|
|
} else {
|
|
bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n",
|
|
ring->start, ring->end);
|
|
}
|
|
|
|
if (++ring->start >= BGMAC_TX_RING_SLOTS)
|
|
ring->start = 0;
|
|
freed = true;
|
|
}
|
|
|
|
netdev_completed_queue(bgmac->net_dev, pkts_compl, bytes_compl);
|
|
|
|
if (freed && netif_queue_stopped(bgmac->net_dev))
|
|
netif_wake_queue(bgmac->net_dev);
|
|
}
|
|
|
|
static void bgmac_dma_rx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
|
|
{
|
|
if (!ring->mmio_base)
|
|
return;
|
|
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0);
|
|
if (!bgmac_wait_value(bgmac->core,
|
|
ring->mmio_base + BGMAC_DMA_RX_STATUS,
|
|
BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED,
|
|
10000))
|
|
bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n",
|
|
ring->mmio_base);
|
|
}
|
|
|
|
static void bgmac_dma_rx_enable(struct bgmac *bgmac,
|
|
struct bgmac_dma_ring *ring)
|
|
{
|
|
u32 ctl;
|
|
|
|
ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL);
|
|
if (bgmac->core->id.rev >= 4) {
|
|
ctl &= ~BGMAC_DMA_RX_BL_MASK;
|
|
ctl |= BGMAC_DMA_RX_BL_128 << BGMAC_DMA_RX_BL_SHIFT;
|
|
|
|
ctl &= ~BGMAC_DMA_RX_PC_MASK;
|
|
ctl |= BGMAC_DMA_RX_PC_8 << BGMAC_DMA_RX_PC_SHIFT;
|
|
|
|
ctl &= ~BGMAC_DMA_RX_PT_MASK;
|
|
ctl |= BGMAC_DMA_RX_PT_1 << BGMAC_DMA_RX_PT_SHIFT;
|
|
}
|
|
ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
|
|
ctl |= BGMAC_DMA_RX_ENABLE;
|
|
ctl |= BGMAC_DMA_RX_PARITY_DISABLE;
|
|
ctl |= BGMAC_DMA_RX_OVERFLOW_CONT;
|
|
ctl |= BGMAC_RX_FRAME_OFFSET << BGMAC_DMA_RX_FRAME_OFFSET_SHIFT;
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, ctl);
|
|
}
|
|
|
|
static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac,
|
|
struct bgmac_slot_info *slot)
|
|
{
|
|
struct device *dma_dev = bgmac->core->dma_dev;
|
|
struct sk_buff *skb;
|
|
dma_addr_t dma_addr;
|
|
struct bgmac_rx_header *rx;
|
|
|
|
/* Alloc skb */
|
|
skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
/* Poison - if everything goes fine, hardware will overwrite it */
|
|
rx = (struct bgmac_rx_header *)skb->data;
|
|
rx->len = cpu_to_le16(0xdead);
|
|
rx->flags = cpu_to_le16(0xbeef);
|
|
|
|
/* Map skb for the DMA */
|
|
dma_addr = dma_map_single(dma_dev, skb->data,
|
|
BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(dma_dev, dma_addr)) {
|
|
bgmac_err(bgmac, "DMA mapping error\n");
|
|
dev_kfree_skb(skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Update the slot */
|
|
slot->skb = skb;
|
|
slot->dma_addr = dma_addr;
|
|
|
|
if (slot->dma_addr & 0xC0000000)
|
|
bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bgmac_dma_rx_setup_desc(struct bgmac *bgmac,
|
|
struct bgmac_dma_ring *ring, int desc_idx)
|
|
{
|
|
struct bgmac_dma_desc *dma_desc = ring->cpu_base + desc_idx;
|
|
u32 ctl0 = 0, ctl1 = 0;
|
|
|
|
if (desc_idx == ring->num_slots - 1)
|
|
ctl0 |= BGMAC_DESC_CTL0_EOT;
|
|
ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN;
|
|
/* Is there any BGMAC device that requires extension? */
|
|
/* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) &
|
|
* B43_DMA64_DCTL1_ADDREXT_MASK;
|
|
*/
|
|
|
|
dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[desc_idx].dma_addr));
|
|
dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[desc_idx].dma_addr));
|
|
dma_desc->ctl0 = cpu_to_le32(ctl0);
|
|
dma_desc->ctl1 = cpu_to_le32(ctl1);
|
|
}
|
|
|
|
static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring,
|
|
int weight)
|
|
{
|
|
u32 end_slot;
|
|
int handled = 0;
|
|
|
|
end_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_STATUS);
|
|
end_slot &= BGMAC_DMA_RX_STATDPTR;
|
|
end_slot -= ring->index_base;
|
|
end_slot &= BGMAC_DMA_RX_STATDPTR;
|
|
end_slot /= sizeof(struct bgmac_dma_desc);
|
|
|
|
ring->end = end_slot;
|
|
|
|
while (ring->start != ring->end) {
|
|
struct device *dma_dev = bgmac->core->dma_dev;
|
|
struct bgmac_slot_info *slot = &ring->slots[ring->start];
|
|
struct sk_buff *skb = slot->skb;
|
|
struct bgmac_rx_header *rx;
|
|
u16 len, flags;
|
|
|
|
/* Unmap buffer to make it accessible to the CPU */
|
|
dma_sync_single_for_cpu(dma_dev, slot->dma_addr,
|
|
BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
|
|
|
|
/* Get info from the header */
|
|
rx = (struct bgmac_rx_header *)skb->data;
|
|
len = le16_to_cpu(rx->len);
|
|
flags = le16_to_cpu(rx->flags);
|
|
|
|
do {
|
|
dma_addr_t old_dma_addr = slot->dma_addr;
|
|
int err;
|
|
|
|
/* Check for poison and drop or pass the packet */
|
|
if (len == 0xdead && flags == 0xbeef) {
|
|
bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n",
|
|
ring->start);
|
|
dma_sync_single_for_device(dma_dev,
|
|
slot->dma_addr,
|
|
BGMAC_RX_BUF_SIZE,
|
|
DMA_FROM_DEVICE);
|
|
break;
|
|
}
|
|
|
|
/* Omit CRC. */
|
|
len -= ETH_FCS_LEN;
|
|
|
|
/* Prepare new skb as replacement */
|
|
err = bgmac_dma_rx_skb_for_slot(bgmac, slot);
|
|
if (err) {
|
|
/* Poison the old skb */
|
|
rx->len = cpu_to_le16(0xdead);
|
|
rx->flags = cpu_to_le16(0xbeef);
|
|
|
|
dma_sync_single_for_device(dma_dev,
|
|
slot->dma_addr,
|
|
BGMAC_RX_BUF_SIZE,
|
|
DMA_FROM_DEVICE);
|
|
break;
|
|
}
|
|
bgmac_dma_rx_setup_desc(bgmac, ring, ring->start);
|
|
|
|
/* Unmap old skb, we'll pass it to the netfif */
|
|
dma_unmap_single(dma_dev, old_dma_addr,
|
|
BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
|
|
|
|
skb_put(skb, BGMAC_RX_FRAME_OFFSET + len);
|
|
skb_pull(skb, BGMAC_RX_FRAME_OFFSET);
|
|
|
|
skb_checksum_none_assert(skb);
|
|
skb->protocol = eth_type_trans(skb, bgmac->net_dev);
|
|
netif_receive_skb(skb);
|
|
handled++;
|
|
} while (0);
|
|
|
|
if (++ring->start >= BGMAC_RX_RING_SLOTS)
|
|
ring->start = 0;
|
|
|
|
if (handled >= weight) /* Should never be greater */
|
|
break;
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
/* Does ring support unaligned addressing? */
|
|
static bool bgmac_dma_unaligned(struct bgmac *bgmac,
|
|
struct bgmac_dma_ring *ring,
|
|
enum bgmac_dma_ring_type ring_type)
|
|
{
|
|
switch (ring_type) {
|
|
case BGMAC_DMA_RING_TX:
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO,
|
|
0xff0);
|
|
if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO))
|
|
return true;
|
|
break;
|
|
case BGMAC_DMA_RING_RX:
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO,
|
|
0xff0);
|
|
if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO))
|
|
return true;
|
|
break;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static void bgmac_dma_ring_free(struct bgmac *bgmac,
|
|
struct bgmac_dma_ring *ring)
|
|
{
|
|
struct device *dma_dev = bgmac->core->dma_dev;
|
|
struct bgmac_slot_info *slot;
|
|
int size;
|
|
int i;
|
|
|
|
for (i = 0; i < ring->num_slots; i++) {
|
|
slot = &ring->slots[i];
|
|
if (slot->skb) {
|
|
if (slot->dma_addr)
|
|
dma_unmap_single(dma_dev, slot->dma_addr,
|
|
slot->skb->len, DMA_TO_DEVICE);
|
|
dev_kfree_skb(slot->skb);
|
|
}
|
|
}
|
|
|
|
if (ring->cpu_base) {
|
|
/* Free ring of descriptors */
|
|
size = ring->num_slots * sizeof(struct bgmac_dma_desc);
|
|
dma_free_coherent(dma_dev, size, ring->cpu_base,
|
|
ring->dma_base);
|
|
}
|
|
}
|
|
|
|
static void bgmac_dma_free(struct bgmac *bgmac)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
|
|
bgmac_dma_ring_free(bgmac, &bgmac->tx_ring[i]);
|
|
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
|
|
bgmac_dma_ring_free(bgmac, &bgmac->rx_ring[i]);
|
|
}
|
|
|
|
static int bgmac_dma_alloc(struct bgmac *bgmac)
|
|
{
|
|
struct device *dma_dev = bgmac->core->dma_dev;
|
|
struct bgmac_dma_ring *ring;
|
|
static const u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1,
|
|
BGMAC_DMA_BASE2, BGMAC_DMA_BASE3, };
|
|
int size; /* ring size: different for Tx and Rx */
|
|
int err;
|
|
int i;
|
|
|
|
BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base));
|
|
BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base));
|
|
|
|
if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) {
|
|
bgmac_err(bgmac, "Core does not report 64-bit DMA\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
|
|
ring = &bgmac->tx_ring[i];
|
|
ring->num_slots = BGMAC_TX_RING_SLOTS;
|
|
ring->mmio_base = ring_base[i];
|
|
|
|
/* Alloc ring of descriptors */
|
|
size = ring->num_slots * sizeof(struct bgmac_dma_desc);
|
|
ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
|
|
&ring->dma_base,
|
|
GFP_KERNEL);
|
|
if (!ring->cpu_base) {
|
|
bgmac_err(bgmac, "Allocation of TX ring 0x%X failed\n",
|
|
ring->mmio_base);
|
|
goto err_dma_free;
|
|
}
|
|
if (ring->dma_base & 0xC0000000)
|
|
bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
|
|
|
|
ring->unaligned = bgmac_dma_unaligned(bgmac, ring,
|
|
BGMAC_DMA_RING_TX);
|
|
if (ring->unaligned)
|
|
ring->index_base = lower_32_bits(ring->dma_base);
|
|
else
|
|
ring->index_base = 0;
|
|
|
|
/* No need to alloc TX slots yet */
|
|
}
|
|
|
|
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
|
|
int j;
|
|
|
|
ring = &bgmac->rx_ring[i];
|
|
ring->num_slots = BGMAC_RX_RING_SLOTS;
|
|
ring->mmio_base = ring_base[i];
|
|
|
|
/* Alloc ring of descriptors */
|
|
size = ring->num_slots * sizeof(struct bgmac_dma_desc);
|
|
ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
|
|
&ring->dma_base,
|
|
GFP_KERNEL);
|
|
if (!ring->cpu_base) {
|
|
bgmac_err(bgmac, "Allocation of RX ring 0x%X failed\n",
|
|
ring->mmio_base);
|
|
err = -ENOMEM;
|
|
goto err_dma_free;
|
|
}
|
|
if (ring->dma_base & 0xC0000000)
|
|
bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
|
|
|
|
ring->unaligned = bgmac_dma_unaligned(bgmac, ring,
|
|
BGMAC_DMA_RING_RX);
|
|
if (ring->unaligned)
|
|
ring->index_base = lower_32_bits(ring->dma_base);
|
|
else
|
|
ring->index_base = 0;
|
|
|
|
/* Alloc RX slots */
|
|
for (j = 0; j < ring->num_slots; j++) {
|
|
err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]);
|
|
if (err) {
|
|
bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n");
|
|
goto err_dma_free;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_dma_free:
|
|
bgmac_dma_free(bgmac);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void bgmac_dma_init(struct bgmac *bgmac)
|
|
{
|
|
struct bgmac_dma_ring *ring;
|
|
int i;
|
|
|
|
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
|
|
ring = &bgmac->tx_ring[i];
|
|
|
|
if (!ring->unaligned)
|
|
bgmac_dma_tx_enable(bgmac, ring);
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO,
|
|
lower_32_bits(ring->dma_base));
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGHI,
|
|
upper_32_bits(ring->dma_base));
|
|
if (ring->unaligned)
|
|
bgmac_dma_tx_enable(bgmac, ring);
|
|
|
|
ring->start = 0;
|
|
ring->end = 0; /* Points the slot that should *not* be read */
|
|
}
|
|
|
|
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
|
|
int j;
|
|
|
|
ring = &bgmac->rx_ring[i];
|
|
|
|
if (!ring->unaligned)
|
|
bgmac_dma_rx_enable(bgmac, ring);
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO,
|
|
lower_32_bits(ring->dma_base));
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI,
|
|
upper_32_bits(ring->dma_base));
|
|
if (ring->unaligned)
|
|
bgmac_dma_rx_enable(bgmac, ring);
|
|
|
|
for (j = 0; j < ring->num_slots; j++)
|
|
bgmac_dma_rx_setup_desc(bgmac, ring, j);
|
|
|
|
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
|
|
ring->index_base +
|
|
ring->num_slots * sizeof(struct bgmac_dma_desc));
|
|
|
|
ring->start = 0;
|
|
ring->end = 0;
|
|
}
|
|
}
|
|
|
|
/**************************************************
|
|
* PHY ops
|
|
**************************************************/
|
|
|
|
static u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg)
|
|
{
|
|
struct bcma_device *core;
|
|
u16 phy_access_addr;
|
|
u16 phy_ctl_addr;
|
|
u32 tmp;
|
|
|
|
BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK);
|
|
BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK);
|
|
BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT);
|
|
BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK);
|
|
BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT);
|
|
BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE);
|
|
BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START);
|
|
BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK);
|
|
BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK);
|
|
BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT);
|
|
BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE);
|
|
|
|
if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
|
|
core = bgmac->core->bus->drv_gmac_cmn.core;
|
|
phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
|
|
phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
|
|
} else {
|
|
core = bgmac->core;
|
|
phy_access_addr = BGMAC_PHY_ACCESS;
|
|
phy_ctl_addr = BGMAC_PHY_CNTL;
|
|
}
|
|
|
|
tmp = bcma_read32(core, phy_ctl_addr);
|
|
tmp &= ~BGMAC_PC_EPA_MASK;
|
|
tmp |= phyaddr;
|
|
bcma_write32(core, phy_ctl_addr, tmp);
|
|
|
|
tmp = BGMAC_PA_START;
|
|
tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT;
|
|
tmp |= reg << BGMAC_PA_REG_SHIFT;
|
|
bcma_write32(core, phy_access_addr, tmp);
|
|
|
|
if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) {
|
|
bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n",
|
|
phyaddr, reg);
|
|
return 0xffff;
|
|
}
|
|
|
|
return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK;
|
|
}
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */
|
|
static int bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value)
|
|
{
|
|
struct bcma_device *core;
|
|
u16 phy_access_addr;
|
|
u16 phy_ctl_addr;
|
|
u32 tmp;
|
|
|
|
if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
|
|
core = bgmac->core->bus->drv_gmac_cmn.core;
|
|
phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
|
|
phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
|
|
} else {
|
|
core = bgmac->core;
|
|
phy_access_addr = BGMAC_PHY_ACCESS;
|
|
phy_ctl_addr = BGMAC_PHY_CNTL;
|
|
}
|
|
|
|
tmp = bcma_read32(core, phy_ctl_addr);
|
|
tmp &= ~BGMAC_PC_EPA_MASK;
|
|
tmp |= phyaddr;
|
|
bcma_write32(core, phy_ctl_addr, tmp);
|
|
|
|
bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO);
|
|
if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO)
|
|
bgmac_warn(bgmac, "Error setting MDIO int\n");
|
|
|
|
tmp = BGMAC_PA_START;
|
|
tmp |= BGMAC_PA_WRITE;
|
|
tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT;
|
|
tmp |= reg << BGMAC_PA_REG_SHIFT;
|
|
tmp |= value;
|
|
bcma_write32(core, phy_access_addr, tmp);
|
|
|
|
if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) {
|
|
bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n",
|
|
phyaddr, reg);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */
|
|
static void bgmac_phy_init(struct bgmac *bgmac)
|
|
{
|
|
struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
|
|
struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
|
|
u8 i;
|
|
|
|
if (ci->id == BCMA_CHIP_ID_BCM5356) {
|
|
for (i = 0; i < 5; i++) {
|
|
bgmac_phy_write(bgmac, i, 0x1f, 0x008b);
|
|
bgmac_phy_write(bgmac, i, 0x15, 0x0100);
|
|
bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
|
|
bgmac_phy_write(bgmac, i, 0x12, 0x2aaa);
|
|
bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
|
|
}
|
|
}
|
|
if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) ||
|
|
(ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) ||
|
|
(ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) {
|
|
bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0);
|
|
bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0);
|
|
for (i = 0; i < 5; i++) {
|
|
bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
|
|
bgmac_phy_write(bgmac, i, 0x16, 0x5284);
|
|
bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
|
|
bgmac_phy_write(bgmac, i, 0x17, 0x0010);
|
|
bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
|
|
bgmac_phy_write(bgmac, i, 0x16, 0x5296);
|
|
bgmac_phy_write(bgmac, i, 0x17, 0x1073);
|
|
bgmac_phy_write(bgmac, i, 0x17, 0x9073);
|
|
bgmac_phy_write(bgmac, i, 0x16, 0x52b6);
|
|
bgmac_phy_write(bgmac, i, 0x17, 0x9273);
|
|
bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */
|
|
static void bgmac_phy_reset(struct bgmac *bgmac)
|
|
{
|
|
if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
|
|
return;
|
|
|
|
bgmac_phy_write(bgmac, bgmac->phyaddr, MII_BMCR, BMCR_RESET);
|
|
udelay(100);
|
|
if (bgmac_phy_read(bgmac, bgmac->phyaddr, MII_BMCR) & BMCR_RESET)
|
|
bgmac_err(bgmac, "PHY reset failed\n");
|
|
bgmac_phy_init(bgmac);
|
|
}
|
|
|
|
/**************************************************
|
|
* Chip ops
|
|
**************************************************/
|
|
|
|
/* TODO: can we just drop @force? Can we don't reset MAC at all if there is
|
|
* nothing to change? Try if after stabilizng driver.
|
|
*/
|
|
static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set,
|
|
bool force)
|
|
{
|
|
u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
|
|
u32 new_val = (cmdcfg & mask) | set;
|
|
|
|
bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR(bgmac->core->id.rev));
|
|
udelay(2);
|
|
|
|
if (new_val != cmdcfg || force)
|
|
bgmac_write(bgmac, BGMAC_CMDCFG, new_val);
|
|
|
|
bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR(bgmac->core->id.rev));
|
|
udelay(2);
|
|
}
|
|
|
|
static void bgmac_write_mac_address(struct bgmac *bgmac, u8 *addr)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
|
|
bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp);
|
|
tmp = (addr[4] << 8) | addr[5];
|
|
bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp);
|
|
}
|
|
|
|
static void bgmac_set_rx_mode(struct net_device *net_dev)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
|
|
if (net_dev->flags & IFF_PROMISC)
|
|
bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, true);
|
|
else
|
|
bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, true);
|
|
}
|
|
|
|
#if 0 /* We don't use that regs yet */
|
|
static void bgmac_chip_stats_update(struct bgmac *bgmac)
|
|
{
|
|
int i;
|
|
|
|
if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) {
|
|
for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++)
|
|
bgmac->mib_tx_regs[i] =
|
|
bgmac_read(bgmac,
|
|
BGMAC_TX_GOOD_OCTETS + (i * 4));
|
|
for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++)
|
|
bgmac->mib_rx_regs[i] =
|
|
bgmac_read(bgmac,
|
|
BGMAC_RX_GOOD_OCTETS + (i * 4));
|
|
}
|
|
|
|
/* TODO: what else? how to handle BCM4706? Specs are needed */
|
|
}
|
|
#endif
|
|
|
|
static void bgmac_clear_mib(struct bgmac *bgmac)
|
|
{
|
|
int i;
|
|
|
|
if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT)
|
|
return;
|
|
|
|
bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR);
|
|
for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++)
|
|
bgmac_read(bgmac, BGMAC_TX_GOOD_OCTETS + (i * 4));
|
|
for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++)
|
|
bgmac_read(bgmac, BGMAC_RX_GOOD_OCTETS + (i * 4));
|
|
}
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */
|
|
static void bgmac_mac_speed(struct bgmac *bgmac)
|
|
{
|
|
u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD);
|
|
u32 set = 0;
|
|
|
|
switch (bgmac->mac_speed) {
|
|
case SPEED_10:
|
|
set |= BGMAC_CMDCFG_ES_10;
|
|
break;
|
|
case SPEED_100:
|
|
set |= BGMAC_CMDCFG_ES_100;
|
|
break;
|
|
case SPEED_1000:
|
|
set |= BGMAC_CMDCFG_ES_1000;
|
|
break;
|
|
case SPEED_2500:
|
|
set |= BGMAC_CMDCFG_ES_2500;
|
|
break;
|
|
default:
|
|
bgmac_err(bgmac, "Unsupported speed: %d\n", bgmac->mac_speed);
|
|
}
|
|
|
|
if (bgmac->mac_duplex == DUPLEX_HALF)
|
|
set |= BGMAC_CMDCFG_HD;
|
|
|
|
bgmac_cmdcfg_maskset(bgmac, mask, set, true);
|
|
}
|
|
|
|
static void bgmac_miiconfig(struct bgmac *bgmac)
|
|
{
|
|
struct bcma_device *core = bgmac->core;
|
|
struct bcma_chipinfo *ci = &core->bus->chipinfo;
|
|
u8 imode;
|
|
|
|
if (ci->id == BCMA_CHIP_ID_BCM4707 ||
|
|
ci->id == BCMA_CHIP_ID_BCM53018) {
|
|
bcma_awrite32(core, BCMA_IOCTL,
|
|
bcma_aread32(core, BCMA_IOCTL) | 0x40 |
|
|
BGMAC_BCMA_IOCTL_SW_CLKEN);
|
|
bgmac->mac_speed = SPEED_2500;
|
|
bgmac->mac_duplex = DUPLEX_FULL;
|
|
bgmac_mac_speed(bgmac);
|
|
} else {
|
|
imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) &
|
|
BGMAC_DS_MM_MASK) >> BGMAC_DS_MM_SHIFT;
|
|
if (imode == 0 || imode == 1) {
|
|
bgmac->mac_speed = SPEED_100;
|
|
bgmac->mac_duplex = DUPLEX_FULL;
|
|
bgmac_mac_speed(bgmac);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */
|
|
static void bgmac_chip_reset(struct bgmac *bgmac)
|
|
{
|
|
struct bcma_device *core = bgmac->core;
|
|
struct bcma_bus *bus = core->bus;
|
|
struct bcma_chipinfo *ci = &bus->chipinfo;
|
|
u32 flags;
|
|
u32 iost;
|
|
int i;
|
|
|
|
if (bcma_core_is_enabled(core)) {
|
|
if (!bgmac->stats_grabbed) {
|
|
/* bgmac_chip_stats_update(bgmac); */
|
|
bgmac->stats_grabbed = true;
|
|
}
|
|
|
|
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
|
|
bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]);
|
|
|
|
bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false);
|
|
udelay(1);
|
|
|
|
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
|
|
bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]);
|
|
|
|
/* TODO: Clear software multicast filter list */
|
|
}
|
|
|
|
iost = bcma_aread32(core, BCMA_IOST);
|
|
if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) ||
|
|
(ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
|
|
(ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188))
|
|
iost &= ~BGMAC_BCMA_IOST_ATTACHED;
|
|
|
|
/* 3GMAC: for BCM4707, only do core reset at bgmac_probe() */
|
|
if (ci->id != BCMA_CHIP_ID_BCM4707) {
|
|
flags = 0;
|
|
if (iost & BGMAC_BCMA_IOST_ATTACHED) {
|
|
flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
|
|
if (!bgmac->has_robosw)
|
|
flags |= BGMAC_BCMA_IOCTL_SW_RESET;
|
|
}
|
|
bcma_core_enable(core, flags);
|
|
}
|
|
|
|
/* Request Misc PLL for corerev > 2 */
|
|
if (core->id.rev > 2 &&
|
|
ci->id != BCMA_CHIP_ID_BCM4707 &&
|
|
ci->id != BCMA_CHIP_ID_BCM53018) {
|
|
bgmac_set(bgmac, BCMA_CLKCTLST,
|
|
BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ);
|
|
bgmac_wait_value(bgmac->core, BCMA_CLKCTLST,
|
|
BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
|
|
BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
|
|
1000);
|
|
}
|
|
|
|
if (ci->id == BCMA_CHIP_ID_BCM5357 ||
|
|
ci->id == BCMA_CHIP_ID_BCM4749 ||
|
|
ci->id == BCMA_CHIP_ID_BCM53572) {
|
|
struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
|
|
u8 et_swtype = 0;
|
|
u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY |
|
|
BGMAC_CHIPCTL_1_IF_TYPE_MII;
|
|
char buf[4];
|
|
|
|
if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) {
|
|
if (kstrtou8(buf, 0, &et_swtype))
|
|
bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n",
|
|
buf);
|
|
et_swtype &= 0x0f;
|
|
et_swtype <<= 4;
|
|
sw_type = et_swtype;
|
|
} else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM5358) {
|
|
sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
|
|
} else if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) ||
|
|
(ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
|
|
(ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188)) {
|
|
sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII |
|
|
BGMAC_CHIPCTL_1_SW_TYPE_RGMII;
|
|
}
|
|
bcma_chipco_chipctl_maskset(cc, 1,
|
|
~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
|
|
BGMAC_CHIPCTL_1_SW_TYPE_MASK),
|
|
sw_type);
|
|
}
|
|
|
|
if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
|
|
bcma_awrite32(core, BCMA_IOCTL,
|
|
bcma_aread32(core, BCMA_IOCTL) &
|
|
~BGMAC_BCMA_IOCTL_SW_RESET);
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset
|
|
* Specs don't say about using BGMAC_CMDCFG_SR, but in this routine
|
|
* BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to
|
|
* be keps until taking MAC out of the reset.
|
|
*/
|
|
bgmac_cmdcfg_maskset(bgmac,
|
|
~(BGMAC_CMDCFG_TE |
|
|
BGMAC_CMDCFG_RE |
|
|
BGMAC_CMDCFG_RPI |
|
|
BGMAC_CMDCFG_TAI |
|
|
BGMAC_CMDCFG_HD |
|
|
BGMAC_CMDCFG_ML |
|
|
BGMAC_CMDCFG_CFE |
|
|
BGMAC_CMDCFG_RL |
|
|
BGMAC_CMDCFG_RED |
|
|
BGMAC_CMDCFG_PE |
|
|
BGMAC_CMDCFG_TPI |
|
|
BGMAC_CMDCFG_PAD_EN |
|
|
BGMAC_CMDCFG_PF),
|
|
BGMAC_CMDCFG_PROM |
|
|
BGMAC_CMDCFG_NLC |
|
|
BGMAC_CMDCFG_CFE |
|
|
BGMAC_CMDCFG_SR(core->id.rev),
|
|
false);
|
|
bgmac->mac_speed = SPEED_UNKNOWN;
|
|
bgmac->mac_duplex = DUPLEX_UNKNOWN;
|
|
|
|
bgmac_clear_mib(bgmac);
|
|
if (core->id.id == BCMA_CORE_4706_MAC_GBIT)
|
|
bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0,
|
|
BCMA_GMAC_CMN_PC_MTE);
|
|
else
|
|
bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE);
|
|
bgmac_miiconfig(bgmac);
|
|
bgmac_phy_init(bgmac);
|
|
|
|
netdev_reset_queue(bgmac->net_dev);
|
|
|
|
bgmac->int_status = 0;
|
|
}
|
|
|
|
static void bgmac_chip_intrs_on(struct bgmac *bgmac)
|
|
{
|
|
bgmac_write(bgmac, BGMAC_INT_MASK, bgmac->int_mask);
|
|
}
|
|
|
|
static void bgmac_chip_intrs_off(struct bgmac *bgmac)
|
|
{
|
|
bgmac_write(bgmac, BGMAC_INT_MASK, 0);
|
|
bgmac_read(bgmac, BGMAC_INT_MASK);
|
|
}
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */
|
|
static void bgmac_enable(struct bgmac *bgmac)
|
|
{
|
|
struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
|
|
u32 cmdcfg;
|
|
u32 mode;
|
|
u32 rxq_ctl;
|
|
u32 fl_ctl;
|
|
u16 bp_clk;
|
|
u8 mdp;
|
|
|
|
cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
|
|
bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE),
|
|
BGMAC_CMDCFG_SR(bgmac->core->id.rev), true);
|
|
udelay(2);
|
|
cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE;
|
|
bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg);
|
|
|
|
mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
|
|
BGMAC_DS_MM_SHIFT;
|
|
if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0)
|
|
bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
|
|
if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2)
|
|
bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0,
|
|
BGMAC_CHIPCTL_1_RXC_DLL_BYPASS);
|
|
|
|
switch (ci->id) {
|
|
case BCMA_CHIP_ID_BCM5357:
|
|
case BCMA_CHIP_ID_BCM4749:
|
|
case BCMA_CHIP_ID_BCM53572:
|
|
case BCMA_CHIP_ID_BCM4716:
|
|
case BCMA_CHIP_ID_BCM47162:
|
|
fl_ctl = 0x03cb04cb;
|
|
if (ci->id == BCMA_CHIP_ID_BCM5357 ||
|
|
ci->id == BCMA_CHIP_ID_BCM4749 ||
|
|
ci->id == BCMA_CHIP_ID_BCM53572)
|
|
fl_ctl = 0x2300e1;
|
|
bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl);
|
|
bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff);
|
|
break;
|
|
}
|
|
|
|
if (ci->id != BCMA_CHIP_ID_BCM4707 &&
|
|
ci->id != BCMA_CHIP_ID_BCM53018) {
|
|
rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
|
|
rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
|
|
bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) /
|
|
1000000;
|
|
mdp = (bp_clk * 128 / 1000) - 3;
|
|
rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
|
|
bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
|
|
}
|
|
}
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
|
|
static void bgmac_chip_init(struct bgmac *bgmac, bool full_init)
|
|
{
|
|
struct bgmac_dma_ring *ring;
|
|
int i;
|
|
|
|
/* 1 interrupt per received frame */
|
|
bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT);
|
|
|
|
/* Enable 802.3x tx flow control (honor received PAUSE frames) */
|
|
bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true);
|
|
|
|
bgmac_set_rx_mode(bgmac->net_dev);
|
|
|
|
bgmac_write_mac_address(bgmac, bgmac->net_dev->dev_addr);
|
|
|
|
if (bgmac->loopback)
|
|
bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false);
|
|
else
|
|
bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, false);
|
|
|
|
bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
|
|
|
|
if (full_init) {
|
|
bgmac_dma_init(bgmac);
|
|
if (1) /* FIXME: is there any case we don't want IRQs? */
|
|
bgmac_chip_intrs_on(bgmac);
|
|
} else {
|
|
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
|
|
ring = &bgmac->rx_ring[i];
|
|
bgmac_dma_rx_enable(bgmac, ring);
|
|
}
|
|
}
|
|
|
|
bgmac_enable(bgmac);
|
|
}
|
|
|
|
static irqreturn_t bgmac_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(dev_id);
|
|
|
|
u32 int_status = bgmac_read(bgmac, BGMAC_INT_STATUS);
|
|
int_status &= bgmac->int_mask;
|
|
|
|
if (!int_status)
|
|
return IRQ_NONE;
|
|
|
|
/* Ack */
|
|
bgmac_write(bgmac, BGMAC_INT_STATUS, int_status);
|
|
|
|
/* Disable new interrupts until handling existing ones */
|
|
bgmac_chip_intrs_off(bgmac);
|
|
|
|
bgmac->int_status = int_status;
|
|
|
|
napi_schedule(&bgmac->napi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int bgmac_poll(struct napi_struct *napi, int weight)
|
|
{
|
|
struct bgmac *bgmac = container_of(napi, struct bgmac, napi);
|
|
struct bgmac_dma_ring *ring;
|
|
int handled = 0;
|
|
|
|
if (bgmac->int_status & BGMAC_IS_TX0) {
|
|
ring = &bgmac->tx_ring[0];
|
|
bgmac_dma_tx_free(bgmac, ring);
|
|
bgmac->int_status &= ~BGMAC_IS_TX0;
|
|
}
|
|
|
|
if (bgmac->int_status & BGMAC_IS_RX) {
|
|
ring = &bgmac->rx_ring[0];
|
|
handled += bgmac_dma_rx_read(bgmac, ring, weight);
|
|
bgmac->int_status &= ~BGMAC_IS_RX;
|
|
}
|
|
|
|
if (bgmac->int_status) {
|
|
bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status);
|
|
bgmac->int_status = 0;
|
|
}
|
|
|
|
if (handled < weight)
|
|
napi_complete(napi);
|
|
|
|
bgmac_chip_intrs_on(bgmac);
|
|
|
|
return handled;
|
|
}
|
|
|
|
/**************************************************
|
|
* net_device_ops
|
|
**************************************************/
|
|
|
|
static int bgmac_open(struct net_device *net_dev)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
int err = 0;
|
|
|
|
bgmac_chip_reset(bgmac);
|
|
/* Specs say about reclaiming rings here, but we do that in DMA init */
|
|
bgmac_chip_init(bgmac, true);
|
|
|
|
err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED,
|
|
KBUILD_MODNAME, net_dev);
|
|
if (err < 0) {
|
|
bgmac_err(bgmac, "IRQ request error: %d!\n", err);
|
|
goto err_out;
|
|
}
|
|
napi_enable(&bgmac->napi);
|
|
|
|
phy_start(bgmac->phy_dev);
|
|
|
|
netif_carrier_on(net_dev);
|
|
|
|
err_out:
|
|
return err;
|
|
}
|
|
|
|
static int bgmac_stop(struct net_device *net_dev)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
|
|
netif_carrier_off(net_dev);
|
|
|
|
phy_stop(bgmac->phy_dev);
|
|
|
|
napi_disable(&bgmac->napi);
|
|
bgmac_chip_intrs_off(bgmac);
|
|
free_irq(bgmac->core->irq, net_dev);
|
|
|
|
bgmac_chip_reset(bgmac);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb,
|
|
struct net_device *net_dev)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
struct bgmac_dma_ring *ring;
|
|
|
|
/* No QOS support yet */
|
|
ring = &bgmac->tx_ring[0];
|
|
return bgmac_dma_tx_add(bgmac, ring, skb);
|
|
}
|
|
|
|
static int bgmac_set_mac_address(struct net_device *net_dev, void *addr)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
int ret;
|
|
|
|
ret = eth_prepare_mac_addr_change(net_dev, addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
bgmac_write_mac_address(bgmac, (u8 *)addr);
|
|
eth_commit_mac_addr_change(net_dev, addr);
|
|
return 0;
|
|
}
|
|
|
|
static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
|
|
if (!netif_running(net_dev))
|
|
return -EINVAL;
|
|
|
|
return phy_mii_ioctl(bgmac->phy_dev, ifr, cmd);
|
|
}
|
|
|
|
static const struct net_device_ops bgmac_netdev_ops = {
|
|
.ndo_open = bgmac_open,
|
|
.ndo_stop = bgmac_stop,
|
|
.ndo_start_xmit = bgmac_start_xmit,
|
|
.ndo_set_rx_mode = bgmac_set_rx_mode,
|
|
.ndo_set_mac_address = bgmac_set_mac_address,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_do_ioctl = bgmac_ioctl,
|
|
};
|
|
|
|
/**************************************************
|
|
* ethtool_ops
|
|
**************************************************/
|
|
|
|
static int bgmac_get_settings(struct net_device *net_dev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
|
|
return phy_ethtool_gset(bgmac->phy_dev, cmd);
|
|
}
|
|
|
|
static int bgmac_set_settings(struct net_device *net_dev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
|
|
return phy_ethtool_sset(bgmac->phy_dev, cmd);
|
|
}
|
|
|
|
static void bgmac_get_drvinfo(struct net_device *net_dev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
|
|
strlcpy(info->bus_info, "BCMA", sizeof(info->bus_info));
|
|
}
|
|
|
|
static const struct ethtool_ops bgmac_ethtool_ops = {
|
|
.get_settings = bgmac_get_settings,
|
|
.set_settings = bgmac_set_settings,
|
|
.get_drvinfo = bgmac_get_drvinfo,
|
|
};
|
|
|
|
/**************************************************
|
|
* MII
|
|
**************************************************/
|
|
|
|
static int bgmac_mii_read(struct mii_bus *bus, int mii_id, int regnum)
|
|
{
|
|
return bgmac_phy_read(bus->priv, mii_id, regnum);
|
|
}
|
|
|
|
static int bgmac_mii_write(struct mii_bus *bus, int mii_id, int regnum,
|
|
u16 value)
|
|
{
|
|
return bgmac_phy_write(bus->priv, mii_id, regnum, value);
|
|
}
|
|
|
|
static void bgmac_adjust_link(struct net_device *net_dev)
|
|
{
|
|
struct bgmac *bgmac = netdev_priv(net_dev);
|
|
struct phy_device *phy_dev = bgmac->phy_dev;
|
|
bool update = false;
|
|
|
|
if (phy_dev->link) {
|
|
if (phy_dev->speed != bgmac->mac_speed) {
|
|
bgmac->mac_speed = phy_dev->speed;
|
|
update = true;
|
|
}
|
|
|
|
if (phy_dev->duplex != bgmac->mac_duplex) {
|
|
bgmac->mac_duplex = phy_dev->duplex;
|
|
update = true;
|
|
}
|
|
}
|
|
|
|
if (update) {
|
|
bgmac_mac_speed(bgmac);
|
|
phy_print_status(phy_dev);
|
|
}
|
|
}
|
|
|
|
static int bgmac_mii_register(struct bgmac *bgmac)
|
|
{
|
|
struct mii_bus *mii_bus;
|
|
struct phy_device *phy_dev;
|
|
char bus_id[MII_BUS_ID_SIZE + 3];
|
|
int i, err = 0;
|
|
|
|
mii_bus = mdiobus_alloc();
|
|
if (!mii_bus)
|
|
return -ENOMEM;
|
|
|
|
mii_bus->name = "bgmac mii bus";
|
|
sprintf(mii_bus->id, "%s-%d-%d", "bgmac", bgmac->core->bus->num,
|
|
bgmac->core->core_unit);
|
|
mii_bus->priv = bgmac;
|
|
mii_bus->read = bgmac_mii_read;
|
|
mii_bus->write = bgmac_mii_write;
|
|
mii_bus->parent = &bgmac->core->dev;
|
|
mii_bus->phy_mask = ~(1 << bgmac->phyaddr);
|
|
|
|
mii_bus->irq = kmalloc_array(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
|
|
if (!mii_bus->irq) {
|
|
err = -ENOMEM;
|
|
goto err_free_bus;
|
|
}
|
|
for (i = 0; i < PHY_MAX_ADDR; i++)
|
|
mii_bus->irq[i] = PHY_POLL;
|
|
|
|
err = mdiobus_register(mii_bus);
|
|
if (err) {
|
|
bgmac_err(bgmac, "Registration of mii bus failed\n");
|
|
goto err_free_irq;
|
|
}
|
|
|
|
bgmac->mii_bus = mii_bus;
|
|
|
|
/* Connect to the PHY */
|
|
snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id,
|
|
bgmac->phyaddr);
|
|
phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link,
|
|
PHY_INTERFACE_MODE_MII);
|
|
if (IS_ERR(phy_dev)) {
|
|
bgmac_err(bgmac, "PHY connecton failed\n");
|
|
err = PTR_ERR(phy_dev);
|
|
goto err_unregister_bus;
|
|
}
|
|
bgmac->phy_dev = phy_dev;
|
|
|
|
return err;
|
|
|
|
err_unregister_bus:
|
|
mdiobus_unregister(mii_bus);
|
|
err_free_irq:
|
|
kfree(mii_bus->irq);
|
|
err_free_bus:
|
|
mdiobus_free(mii_bus);
|
|
return err;
|
|
}
|
|
|
|
static void bgmac_mii_unregister(struct bgmac *bgmac)
|
|
{
|
|
struct mii_bus *mii_bus = bgmac->mii_bus;
|
|
|
|
mdiobus_unregister(mii_bus);
|
|
kfree(mii_bus->irq);
|
|
mdiobus_free(mii_bus);
|
|
}
|
|
|
|
/**************************************************
|
|
* BCMA bus ops
|
|
**************************************************/
|
|
|
|
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
|
|
static int bgmac_probe(struct bcma_device *core)
|
|
{
|
|
struct net_device *net_dev;
|
|
struct bgmac *bgmac;
|
|
struct ssb_sprom *sprom = &core->bus->sprom;
|
|
u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac;
|
|
int err;
|
|
|
|
/* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */
|
|
if (core->core_unit > 1) {
|
|
pr_err("Unsupported core_unit %d\n", core->core_unit);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
if (!is_valid_ether_addr(mac)) {
|
|
dev_err(&core->dev, "Invalid MAC addr: %pM\n", mac);
|
|
eth_random_addr(mac);
|
|
dev_warn(&core->dev, "Using random MAC: %pM\n", mac);
|
|
}
|
|
|
|
/* Allocation and references */
|
|
net_dev = alloc_etherdev(sizeof(*bgmac));
|
|
if (!net_dev)
|
|
return -ENOMEM;
|
|
net_dev->netdev_ops = &bgmac_netdev_ops;
|
|
net_dev->irq = core->irq;
|
|
SET_ETHTOOL_OPS(net_dev, &bgmac_ethtool_ops);
|
|
bgmac = netdev_priv(net_dev);
|
|
bgmac->net_dev = net_dev;
|
|
bgmac->core = core;
|
|
bcma_set_drvdata(core, bgmac);
|
|
|
|
/* Defaults */
|
|
memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN);
|
|
|
|
/* On BCM4706 we need common core to access PHY */
|
|
if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
|
|
!core->bus->drv_gmac_cmn.core) {
|
|
bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n");
|
|
err = -ENODEV;
|
|
goto err_netdev_free;
|
|
}
|
|
bgmac->cmn = core->bus->drv_gmac_cmn.core;
|
|
|
|
bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr :
|
|
sprom->et0phyaddr;
|
|
bgmac->phyaddr &= BGMAC_PHY_MASK;
|
|
if (bgmac->phyaddr == BGMAC_PHY_MASK) {
|
|
bgmac_err(bgmac, "No PHY found\n");
|
|
err = -ENODEV;
|
|
goto err_netdev_free;
|
|
}
|
|
bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr,
|
|
bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : "");
|
|
|
|
if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) {
|
|
bgmac_err(bgmac, "PCI setup not implemented\n");
|
|
err = -ENOTSUPP;
|
|
goto err_netdev_free;
|
|
}
|
|
|
|
bgmac_chip_reset(bgmac);
|
|
|
|
/* For Northstar, we have to take all GMAC core out of reset */
|
|
if (core->id.id == BCMA_CHIP_ID_BCM4707 ||
|
|
core->id.id == BCMA_CHIP_ID_BCM53018) {
|
|
struct bcma_device *ns_core;
|
|
int ns_gmac;
|
|
|
|
/* Northstar has 4 GMAC cores */
|
|
for (ns_gmac = 0; ns_gmac < 4; ns_gmac++) {
|
|
/* As Northstar requirement, we have to reset all GMACs
|
|
* before accessing one. bgmac_chip_reset() call
|
|
* bcma_core_enable() for this core. Then the other
|
|
* three GMACs didn't reset. We do it here.
|
|
*/
|
|
ns_core = bcma_find_core_unit(core->bus,
|
|
BCMA_CORE_MAC_GBIT,
|
|
ns_gmac);
|
|
if (ns_core && !bcma_core_is_enabled(ns_core))
|
|
bcma_core_enable(ns_core, 0);
|
|
}
|
|
}
|
|
|
|
err = bgmac_dma_alloc(bgmac);
|
|
if (err) {
|
|
bgmac_err(bgmac, "Unable to alloc memory for DMA\n");
|
|
goto err_netdev_free;
|
|
}
|
|
|
|
bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
|
|
if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0)
|
|
bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
|
|
|
|
/* TODO: reset the external phy. Specs are needed */
|
|
bgmac_phy_reset(bgmac);
|
|
|
|
bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
|
|
BGMAC_BFL_ENETROBO);
|
|
if (bgmac->has_robosw)
|
|
bgmac_warn(bgmac, "Support for Roboswitch not implemented\n");
|
|
|
|
if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
|
|
bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n");
|
|
|
|
err = bgmac_mii_register(bgmac);
|
|
if (err) {
|
|
bgmac_err(bgmac, "Cannot register MDIO\n");
|
|
goto err_dma_free;
|
|
}
|
|
|
|
err = register_netdev(bgmac->net_dev);
|
|
if (err) {
|
|
bgmac_err(bgmac, "Cannot register net device\n");
|
|
goto err_mii_unregister;
|
|
}
|
|
|
|
netif_carrier_off(net_dev);
|
|
|
|
netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
|
|
|
|
return 0;
|
|
|
|
err_mii_unregister:
|
|
bgmac_mii_unregister(bgmac);
|
|
err_dma_free:
|
|
bgmac_dma_free(bgmac);
|
|
|
|
err_netdev_free:
|
|
bcma_set_drvdata(core, NULL);
|
|
free_netdev(net_dev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void bgmac_remove(struct bcma_device *core)
|
|
{
|
|
struct bgmac *bgmac = bcma_get_drvdata(core);
|
|
|
|
netif_napi_del(&bgmac->napi);
|
|
unregister_netdev(bgmac->net_dev);
|
|
bgmac_mii_unregister(bgmac);
|
|
bgmac_dma_free(bgmac);
|
|
bcma_set_drvdata(core, NULL);
|
|
free_netdev(bgmac->net_dev);
|
|
}
|
|
|
|
static struct bcma_driver bgmac_bcma_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = bgmac_bcma_tbl,
|
|
.probe = bgmac_probe,
|
|
.remove = bgmac_remove,
|
|
};
|
|
|
|
static int __init bgmac_init(void)
|
|
{
|
|
int err;
|
|
|
|
err = bcma_driver_register(&bgmac_bcma_driver);
|
|
if (err)
|
|
return err;
|
|
pr_info("Broadcom 47xx GBit MAC driver loaded\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit bgmac_exit(void)
|
|
{
|
|
bcma_driver_unregister(&bgmac_bcma_driver);
|
|
}
|
|
|
|
module_init(bgmac_init)
|
|
module_exit(bgmac_exit)
|
|
|
|
MODULE_AUTHOR("Rafał Miłecki");
|
|
MODULE_LICENSE("GPL");
|