AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-16 21:50:20 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
8009df9e70
linux_dsm_epyc7002/drivers/net/dsa/mv88e6xxx/chip.h
Vivien Didelot cd782656da net: dsa: mv88e6xxx: rework jumbo size operation 
Marvell chips have a Jumbo Mode to set the maximum frame size (MTU).

The mv88e6xxx_ops structure is meant to contain generic functionalities,
no driver logic. Change port_jumbo_config to port_set_jumbo_size setting
the mode from a given maximum size value.

There is no functional changes since we still use 10240 bytes.

At the same time, correctly clear all Jumbo Mode bits before writing.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09 12:10:59 -04:00

532 lines
15 KiB
C
Raw Blame History

/*
* Marvell 88E6xxx Ethernet switch single-chip definition
*
* Copyright (c) 2008 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _MV88E6XXX_CHIP_H
#define _MV88E6XXX_CHIP_H
#include <linux/if_vlan.h>
#include <linux/irq.h>
#include <linux/gpio/consumer.h>
#include <linux/phy.h>
#include <net/dsa.h>
#ifndef UINT64_MAX
#define UINT64_MAX (u64)(~((u64)0))
#endif
#define SMI_CMD 0x00
#define SMI_CMD_BUSY BIT(15)
#define SMI_CMD_CLAUSE_22 BIT(12)
#define SMI_CMD_OP_22_WRITE ((1 << 10) | SMI_CMD_BUSY | SMI_CMD_CLAUSE_22)
#define SMI_CMD_OP_22_READ ((2 << 10) | SMI_CMD_BUSY | SMI_CMD_CLAUSE_22)
#define SMI_CMD_OP_45_WRITE_ADDR ((0 << 10) | SMI_CMD_BUSY)
#define SMI_CMD_OP_45_WRITE_DATA ((1 << 10) | SMI_CMD_BUSY)
#define SMI_CMD_OP_45_READ_DATA ((2 << 10) | SMI_CMD_BUSY)
#define SMI_CMD_OP_45_READ_DATA_INC ((3 << 10) | SMI_CMD_BUSY)
#define SMI_DATA 0x01
#define MV88E6XXX_N_FID 4096
/* PVT limits for 4-bit port and 5-bit switch */
#define MV88E6XXX_MAX_PVT_SWITCHES 32
#define MV88E6XXX_MAX_PVT_PORTS 16
enum mv88e6xxx_egress_mode {
MV88E6XXX_EGRESS_MODE_UNMODIFIED,
MV88E6XXX_EGRESS_MODE_UNTAGGED,
MV88E6XXX_EGRESS_MODE_TAGGED,
MV88E6XXX_EGRESS_MODE_ETHERTYPE,
};
enum mv88e6xxx_frame_mode {
MV88E6XXX_FRAME_MODE_NORMAL,
MV88E6XXX_FRAME_MODE_DSA,
MV88E6XXX_FRAME_MODE_PROVIDER,
MV88E6XXX_FRAME_MODE_ETHERTYPE,
};
/* List of supported models */
enum mv88e6xxx_model {
MV88E6085,
MV88E6095,
MV88E6097,
MV88E6123,
MV88E6131,
MV88E6141,
MV88E6161,
MV88E6165,
MV88E6171,
MV88E6172,
MV88E6175,
MV88E6176,
MV88E6185,
MV88E6190,
MV88E6190X,
MV88E6191,
MV88E6240,
MV88E6290,
MV88E6320,
MV88E6321,
MV88E6341,
MV88E6350,
MV88E6351,
MV88E6352,
MV88E6390,
MV88E6390X,
};
enum mv88e6xxx_family {
MV88E6XXX_FAMILY_NONE,
MV88E6XXX_FAMILY_6065, /* 6031 6035 6061 6065 */
MV88E6XXX_FAMILY_6095, /* 6092 6095 */
MV88E6XXX_FAMILY_6097, /* 6046 6085 6096 6097 */
MV88E6XXX_FAMILY_6165, /* 6123 6161 6165 */
MV88E6XXX_FAMILY_6185, /* 6108 6121 6122 6131 6152 6155 6182 6185 */
MV88E6XXX_FAMILY_6320, /* 6320 6321 */
MV88E6XXX_FAMILY_6341, /* 6141 6341 */
MV88E6XXX_FAMILY_6351, /* 6171 6175 6350 6351 */
MV88E6XXX_FAMILY_6352, /* 6172 6176 6240 6352 */
MV88E6XXX_FAMILY_6390, /* 6190 6190X 6191 6290 6390 6390X */
};
enum mv88e6xxx_cap {
/* Energy Efficient Ethernet.
*/
MV88E6XXX_CAP_EEE,
/* Multi-chip Addressing Mode.
* Some chips respond to only 2 registers of its own SMI device address
* when it is non-zero, and use indirect access to internal registers.
*/
MV88E6XXX_CAP_SMI_CMD, /* (0x00) SMI Command */
MV88E6XXX_CAP_SMI_DATA, /* (0x01) SMI Data */
/* Switch Global (1) Registers.
*/
MV88E6XXX_CAP_G1_ATU_FID, /* (0x01) ATU FID Register */
MV88E6XXX_CAP_G1_VTU_FID, /* (0x02) VTU FID Register */
/* Switch Global 2 Registers.
* The device contains a second set of global 16-bit registers.
*/
MV88E6XXX_CAP_GLOBAL2,
MV88E6XXX_CAP_G2_INT, /* (0x00) Interrupt Status */
MV88E6XXX_CAP_G2_MGMT_EN_2X, /* (0x02) MGMT Enable Register 2x */
MV88E6XXX_CAP_G2_MGMT_EN_0X, /* (0x03) MGMT Enable Register 0x */
MV88E6XXX_CAP_G2_IRL_CMD, /* (0x09) Ingress Rate Command */
MV88E6XXX_CAP_G2_IRL_DATA, /* (0x0a) Ingress Rate Data */
MV88E6XXX_CAP_G2_POT, /* (0x0f) Priority Override Table */
/* Per VLAN Spanning Tree Unit (STU).
* The Port State database, if present, is accessed through VTU
* operations and dedicated SID registers. See GLOBAL_VTU_SID.
*/
MV88E6XXX_CAP_STU,
/* VLAN Table Unit.
* The VTU is used to program 802.1Q VLANs. See GLOBAL_VTU_OP.
*/
MV88E6XXX_CAP_VTU,
};
/* Bitmask of capabilities */
#define MV88E6XXX_FLAG_EEE BIT_ULL(MV88E6XXX_CAP_EEE)
#define MV88E6XXX_FLAG_SMI_CMD BIT_ULL(MV88E6XXX_CAP_SMI_CMD)
#define MV88E6XXX_FLAG_SMI_DATA BIT_ULL(MV88E6XXX_CAP_SMI_DATA)
#define MV88E6XXX_FLAG_G1_VTU_FID BIT_ULL(MV88E6XXX_CAP_G1_VTU_FID)
#define MV88E6XXX_FLAG_GLOBAL2 BIT_ULL(MV88E6XXX_CAP_GLOBAL2)
#define MV88E6XXX_FLAG_G2_INT BIT_ULL(MV88E6XXX_CAP_G2_INT)
#define MV88E6XXX_FLAG_G2_MGMT_EN_2X BIT_ULL(MV88E6XXX_CAP_G2_MGMT_EN_2X)
#define MV88E6XXX_FLAG_G2_MGMT_EN_0X BIT_ULL(MV88E6XXX_CAP_G2_MGMT_EN_0X)
#define MV88E6XXX_FLAG_G2_IRL_CMD BIT_ULL(MV88E6XXX_CAP_G2_IRL_CMD)
#define MV88E6XXX_FLAG_G2_IRL_DATA BIT_ULL(MV88E6XXX_CAP_G2_IRL_DATA)
#define MV88E6XXX_FLAG_G2_POT BIT_ULL(MV88E6XXX_CAP_G2_POT)
/* Ingress Rate Limit unit */
#define MV88E6XXX_FLAGS_IRL \
(MV88E6XXX_FLAG_G2_IRL_CMD | \
MV88E6XXX_FLAG_G2_IRL_DATA)
/* Multi-chip Addressing Mode */
#define MV88E6XXX_FLAGS_MULTI_CHIP \
(MV88E6XXX_FLAG_SMI_CMD | \
MV88E6XXX_FLAG_SMI_DATA)
#define MV88E6XXX_FLAGS_FAMILY_6095 \
(MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6097 \
(MV88E6XXX_FLAG_G1_VTU_FID | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6165 \
(MV88E6XXX_FLAG_G1_VTU_FID | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6185 \
(MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6320 \
(MV88E6XXX_FLAG_EEE | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6341 \
(MV88E6XXX_FLAG_EEE | \
MV88E6XXX_FLAG_G1_VTU_FID | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6351 \
(MV88E6XXX_FLAG_G1_VTU_FID | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6352 \
(MV88E6XXX_FLAG_EEE | \
MV88E6XXX_FLAG_G1_VTU_FID | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6390 \
(MV88E6XXX_FLAG_EEE | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
struct mv88e6xxx_ops;
struct mv88e6xxx_info {
enum mv88e6xxx_family family;
u16 prod_num;
const char *name;
unsigned int num_databases;
unsigned int num_ports;
unsigned int max_vid;
unsigned int port_base_addr;
unsigned int global1_addr;
unsigned int age_time_coeff;
unsigned int g1_irqs;
bool pvt;
enum dsa_tag_protocol tag_protocol;
unsigned long long flags;
/* Mask for FromPort and ToPort value of PortVec used in ATU Move
* operation. 0 means that the ATU Move operation is not supported.
*/
u8 atu_move_port_mask;
const struct mv88e6xxx_ops *ops;
};
struct mv88e6xxx_atu_entry {
u8 state;
bool trunk;
u16 portvec;
u8 mac[ETH_ALEN];
};
struct mv88e6xxx_vtu_entry {
u16 vid;
u16 fid;
u8 sid;
bool valid;
u8 member[DSA_MAX_PORTS];
u8 state[DSA_MAX_PORTS];
};
struct mv88e6xxx_bus_ops;
struct mv88e6xxx_irq_ops;
struct mv88e6xxx_irq {
u16 masked;
struct irq_chip chip;
struct irq_domain *domain;
unsigned int nirqs;
};
struct mv88e6xxx_chip {
const struct mv88e6xxx_info *info;
/* The dsa_switch this private structure is related to */
struct dsa_switch *ds;
/* The device this structure is associated to */
struct device *dev;
/* This mutex protects the access to the switch registers */
struct mutex reg_lock;
/* The MII bus and the address on the bus that is used to
* communication with the switch
*/
const struct mv88e6xxx_bus_ops *smi_ops;
struct mii_bus *bus;
int sw_addr;
/* Handles automatic disabling and re-enabling of the PHY
* polling unit.
*/
const struct mv88e6xxx_bus_ops *phy_ops;
struct mutex ppu_mutex;
int ppu_disabled;
struct work_struct ppu_work;
struct timer_list ppu_timer;
/* This mutex serialises access to the statistics unit.
* Hold this mutex over snapshot + dump sequences.
*/
struct mutex stats_mutex;
/* A switch may have a GPIO line tied to its reset pin. Parse
* this from the device tree, and use it before performing
* switch soft reset.
*/
struct gpio_desc *reset;
/* set to size of eeprom if supported by the switch */
int eeprom_len;
/* List of mdio busses */
struct list_head mdios;
/* There can be two interrupt controllers, which are chained
* off a GPIO as interrupt source
*/
struct mv88e6xxx_irq g1_irq;
struct mv88e6xxx_irq g2_irq;
int irq;
int device_irq;
int watchdog_irq;
};
struct mv88e6xxx_bus_ops {
int (*read)(struct mv88e6xxx_chip *chip, int addr, int reg, u16 *val);
int (*write)(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val);
};
struct mv88e6xxx_mdio_bus {
struct mii_bus *bus;
struct mv88e6xxx_chip *chip;
struct list_head list;
bool external;
};
struct mv88e6xxx_ops {
int (*get_eeprom)(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom, u8 *data);
int (*set_eeprom)(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom, u8 *data);
int (*set_switch_mac)(struct mv88e6xxx_chip *chip, u8 *addr);
int (*phy_read)(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 *val);
int (*phy_write)(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 val);
/* PHY Polling Unit (PPU) operations */
int (*ppu_enable)(struct mv88e6xxx_chip *chip);
int (*ppu_disable)(struct mv88e6xxx_chip *chip);
/* Switch Software Reset */
int (*reset)(struct mv88e6xxx_chip *chip);
/* RGMII Receive/Transmit Timing Control
* Add delay on PHY_INTERFACE_MODE_RGMII_*ID, no delay otherwise.
*/
int (*port_set_rgmii_delay)(struct mv88e6xxx_chip *chip, int port,
phy_interface_t mode);
#define LINK_FORCED_DOWN 0
#define LINK_FORCED_UP 1
#define LINK_UNFORCED -2
/* Port's MAC link state
* Use LINK_FORCED_UP or LINK_FORCED_DOWN to force link up or down,
* or LINK_UNFORCED for normal link detection.
*/
int (*port_set_link)(struct mv88e6xxx_chip *chip, int port, int link);
#define DUPLEX_UNFORCED -2
/* Port's MAC duplex mode
*
* Use DUPLEX_HALF or DUPLEX_FULL to force half or full duplex,
* or DUPLEX_UNFORCED for normal duplex detection.
*/
int (*port_set_duplex)(struct mv88e6xxx_chip *chip, int port, int dup);
#define SPEED_MAX INT_MAX
#define SPEED_UNFORCED -2
/* Port's MAC speed (in Mbps)
*
* Depending on the chip, 10, 100, 200, 1000, 2500, 10000 are valid.
* Use SPEED_UNFORCED for normal detection, SPEED_MAX for max value.
*/
int (*port_set_speed)(struct mv88e6xxx_chip *chip, int port, int speed);
int (*port_tag_remap)(struct mv88e6xxx_chip *chip, int port);
int (*port_set_frame_mode)(struct mv88e6xxx_chip *chip, int port,
enum mv88e6xxx_frame_mode mode);
int (*port_set_egress_floods)(struct mv88e6xxx_chip *chip, int port,
bool unicast, bool multicast);
int (*port_set_ether_type)(struct mv88e6xxx_chip *chip, int port,
u16 etype);
int (*port_set_jumbo_size)(struct mv88e6xxx_chip *chip, int port,
size_t size);
int (*port_egress_rate_limiting)(struct mv88e6xxx_chip *chip, int port);
int (*port_pause_limit)(struct mv88e6xxx_chip *chip, int port, u8 in,
u8 out);
int (*port_disable_learn_limit)(struct mv88e6xxx_chip *chip, int port);
int (*port_disable_pri_override)(struct mv88e6xxx_chip *chip, int port);
/* CMODE control what PHY mode the MAC will use, eg. SGMII, RGMII, etc.
* Some chips allow this to be configured on specific ports.
*/
int (*port_set_cmode)(struct mv88e6xxx_chip *chip, int port,
phy_interface_t mode);
/* Some devices have a per port register indicating what is
* the upstream port this port should forward to.
*/
int (*port_set_upstream_port)(struct mv88e6xxx_chip *chip, int port,
int upstream_port);
/* Snapshot the statistics for a port. The statistics can then
* be read back a leisure but still with a consistent view.
*/
int (*stats_snapshot)(struct mv88e6xxx_chip *chip, int port);
/* Set the histogram mode for statistics, when the control registers
* are separated out of the STATS_OP register.
*/
int (*stats_set_histogram)(struct mv88e6xxx_chip *chip);
/* Return the number of strings describing statistics */
int (*stats_get_sset_count)(struct mv88e6xxx_chip *chip);
void (*stats_get_strings)(struct mv88e6xxx_chip *chip, uint8_t *data);
void (*stats_get_stats)(struct mv88e6xxx_chip *chip, int port,
uint64_t *data);
int (*set_cpu_port)(struct mv88e6xxx_chip *chip, int port);
int (*set_egress_port)(struct mv88e6xxx_chip *chip, int port);
const struct mv88e6xxx_irq_ops *watchdog_ops;
/* Can be either in g1 or g2, so don't use a prefix */
int (*mgmt_rsvd2cpu)(struct mv88e6xxx_chip *chip);
/* Power on/off a SERDES interface */
int (*serdes_power)(struct mv88e6xxx_chip *chip, int port, bool on);
/* VLAN Translation Unit operations */
int (*vtu_getnext)(struct mv88e6xxx_chip *chip,
struct mv88e6xxx_vtu_entry *entry);
int (*vtu_loadpurge)(struct mv88e6xxx_chip *chip,
struct mv88e6xxx_vtu_entry *entry);
};
struct mv88e6xxx_irq_ops {
/* Action to be performed when the interrupt happens */
int (*irq_action)(struct mv88e6xxx_chip *chip, int irq);
/* Setup the hardware to generate the interrupt */
int (*irq_setup)(struct mv88e6xxx_chip *chip);
/* Reset the hardware to stop generating the interrupt */
void (*irq_free)(struct mv88e6xxx_chip *chip);
};
#define STATS_TYPE_PORT BIT(0)
#define STATS_TYPE_BANK0 BIT(1)
#define STATS_TYPE_BANK1 BIT(2)
struct mv88e6xxx_hw_stat {
char string[ETH_GSTRING_LEN];
int sizeof_stat;
int reg;
int type;
};
static inline bool mv88e6xxx_has(struct mv88e6xxx_chip *chip,
unsigned long flags)
{
return (chip->info->flags & flags) == flags;
}
static inline bool mv88e6xxx_has_pvt(struct mv88e6xxx_chip *chip)
{
return chip->info->pvt;
}
static inline unsigned int mv88e6xxx_num_databases(struct mv88e6xxx_chip *chip)
{
return chip->info->num_databases;
}
static inline unsigned int mv88e6xxx_num_ports(struct mv88e6xxx_chip *chip)
{
return chip->info->num_ports;
}
static inline u16 mv88e6xxx_port_mask(struct mv88e6xxx_chip *chip)
{
return GENMASK(mv88e6xxx_num_ports(chip) - 1, 0);
}
int mv88e6xxx_read(struct mv88e6xxx_chip *chip, int addr, int reg, u16 *val);
int mv88e6xxx_write(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val);
int mv88e6xxx_update(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 update);
int mv88e6xxx_wait(struct mv88e6xxx_chip *chip, int addr, int reg, u16 mask);
struct mii_bus *mv88e6xxx_default_mdio_bus(struct mv88e6xxx_chip *chip);
#endif /* _MV88E6XXX_CHIP_H */
Reference in New Issue View Git Blame Copy Permalink