mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 16:46:45 +07:00
721afaa2ae
As always, a large number of DT updates. Too many to enumerate them all,
but at a glance:
New SoCs introduced in this release:
- Amlogic:
+ Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set
top boxes and other products.
- Mediatek:
+ MT7623A, which is a flavor of the MT7623 family with other on-chip
ethernet options.
- Qualcomm:
+ SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
(Cortex-A75/A55 derivative) SoC that's one of the current high-end
mobile SoCs.
It's great to see mainline support for it. So far, you
can't do much with it, since a lot of peripherals are not yet in the
DTs but driver support for USB, GPU and other pieces are starting to
trickle in. This might end up being a well-supported SoC upstream if
the momentum keeps up.
- Renesas:
+ R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted
SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly
awaiting more. So far, basic drivers such as serial, gpios, PMU and
ethernet are enabled.
+ R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
GPU. Same here, basic set of drivers such as serial, gpios and ethernet
enabled, and SMP support is also forthcoming.
- STMicroelectronics:
+ STM32F469, very similar tih STM32F429 but with display support
Enhancements to SoCs/platforms (DTS contents, some driver portions might
not be in yet):
- Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
- Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
- Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
- Marvell Berlin2CD: SMP support, thermal sensors
- Mediatek MT7623: Highspeed DMA, audio support
- Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
- Renesas: Watchdog and PMU support across many platforms
- Rockchip RK3399: USB3 OTG support
- Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
- STMicro STM32: Lots of peripherals added to STM32MP175C
- Uniphier: Ethernet support
New boards:
- Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
- Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
- Allwinner A33: Nintendo NES/SuperNES Classic Edition
- Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
- Berlin2CD: Valve Steam Link
- Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
- Broadcom: Raspberry Pi 3 B+
- Mediatek MT7623N and MT7623A: reference boards
- Meson 8M2: Tronsmart MXIII Plus
- NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
- Qualcomm MSM8974: Sony Xperia Z1 Compact support
- Qualcomm SDM845: MTP development board
- Renesas: Ebisu R8A77990 board
- Renesas RZ/G1C: iwg23s: iWave G235-SDB
- TI am335x: Pocketbeagle support
-----BEGIN PGP SIGNATURE-----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=jLvk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Olof Johansson:
"As always, a large number of DT updates. Too many to enumerate them
all, but at a glance:
New SoCs introduced in this release:
- Amlogic:
+ Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some
set top boxes and other products.
- Mediatek:
+ MT7623A, which is a flavor of the MT7623 family with other
on-chip ethernet options.
- Qualcomm:
+ SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
(Cortex-A75/A55 derivative) SoC that's one of the current
high-end mobile SoCs.
It's great to see mainline support for it. So far, you can't do
much with it, since a lot of peripherals are not yet in the DTs
but driver support for USB, GPU and other pieces are starting to
trickle in. This might end up being a well-supported SoC
upstream if the momentum keeps up.
- Renesas:
+ R8A77990, a.k.a R-Car E3, a new automotive
entertainment-targeted SoC. Currently only one Cortex-A53 CPU is
enabled, we are eagerly awaiting more. So far, basic drivers
such as serial, gpios, PMU and ethernet are enabled.
+ R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
GPU. Same here, basic set of drivers such as serial, gpios and
ethernet enabled, and SMP support is also forthcoming.
- STMicroelectronics:
+ STM32F469, very similar tih STM32F429 but with display support
Enhancements to SoCs/platforms (DTS contents, some driver portions
might not be in yet):
- Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
- Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
- Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
- Marvell Berlin2CD: SMP support, thermal sensors
- Mediatek MT7623: Highspeed DMA, audio support
- Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
- Renesas: Watchdog and PMU support across many platforms
- Rockchip RK3399: USB3 OTG support
- Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
- STMicro STM32: Lots of peripherals added to STM32MP175C
- Uniphier: Ethernet support
New boards:
- Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
- Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
- Allwinner A33: Nintendo NES/SuperNES Classic Edition
- Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
- Berlin2CD: Valve Steam Link
- Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
- Broadcom: Raspberry Pi 3 B+
- Mediatek MT7623N and MT7623A: reference boards
- Meson 8M2: Tronsmart MXIII Plus
- NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
- Qualcomm MSM8974: Sony Xperia Z1 Compact support
- Qualcomm SDM845: MTP development board
- Renesas: Ebisu R8A77990 board
- Renesas RZ/G1C: iwg23s: iWave G235-SDB
- TI am335x: Pocketbeagle support"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits)
ARM: dts: aspeed: Fix hwrng register address
arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog
arm64: dts: sprd: Add GPIO and GPIO keys device nodes
arm64: dts: sprd: fix typo in 'remote-endpoint'
arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator
arm64: dts: fix regulator property name for wlan pcie endpoint
arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
ARM: dts: pxa3xx: fix MMC clocks
ARM: pxa: dts: add pin definitions for extended GPIOs
ARM: pxa: dts: add gpio-ranges to gpio controller
ARM: dts: ipq8074: Enable few peripherals for hk01 board
ARM: dts: ipq8074: Add pcie nodes
ARM: dts: ipq8074: Add peripheral nodes
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
ARM: dts: ipq4019: Change the max opp frequency
...
842 lines
18 KiB
Plaintext
842 lines
18 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
|
|
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
|
|
*/
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/stm32mp1-clks.h>
|
|
#include <dt-bindings/reset/stm32mp1-resets.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci";
|
|
method = "smc";
|
|
cpu_off = <0x84000002>;
|
|
cpu_on = <0x84000003>;
|
|
};
|
|
|
|
aliases {
|
|
gpio0 = &gpioa;
|
|
gpio1 = &gpiob;
|
|
gpio2 = &gpioc;
|
|
gpio3 = &gpiod;
|
|
gpio4 = &gpioe;
|
|
gpio5 = &gpiof;
|
|
gpio6 = &gpiog;
|
|
gpio7 = &gpioh;
|
|
gpio8 = &gpioi;
|
|
gpio9 = &gpioj;
|
|
gpio10 = &gpiok;
|
|
};
|
|
|
|
intc: interrupt-controller@a0021000 {
|
|
compatible = "arm,cortex-a7-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0xa0021000 0x1000>,
|
|
<0xa0022000 0x2000>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
interrupt-parent = <&intc>;
|
|
};
|
|
|
|
clocks {
|
|
clk_hse: clk-hse {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
clk_hsi: clk-hsi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <64000000>;
|
|
};
|
|
|
|
clk_lse: clk-lse {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
clk_lsi: clk-lsi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32000>;
|
|
};
|
|
|
|
clk_csi: clk-csi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <4000000>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
|
|
timers2: timer@40000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40000000 0x400>;
|
|
clocks = <&rcc TIM2_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@1 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers3: timer@40001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40001000 0x400>;
|
|
clocks = <&rcc TIM3_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@2 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers4: timer@40002000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40002000 0x400>;
|
|
clocks = <&rcc TIM4_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@3 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers5: timer@40003000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40003000 0x400>;
|
|
clocks = <&rcc TIM5_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@4 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <4>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers6: timer@40004000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40004000 0x400>;
|
|
clocks = <&rcc TIM6_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
timer@5 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <5>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers7: timer@40005000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40005000 0x400>;
|
|
clocks = <&rcc TIM7_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
timer@6 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <6>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers12: timer@40006000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40006000 0x400>;
|
|
clocks = <&rcc TIM12_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@11 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <11>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers13: timer@40007000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40007000 0x400>;
|
|
clocks = <&rcc TIM13_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@12 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <12>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers14: timer@40008000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40008000 0x400>;
|
|
clocks = <&rcc TIM14_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@13 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <13>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer1: timer@40009000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x40009000 0x400>;
|
|
clocks = <&rcc LPTIM1_K>;
|
|
clock-names = "mux";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
trigger@0 {
|
|
compatible = "st,stm32-lptimer-trigger";
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-lptimer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usart2: serial@4000e000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x4000e000 0x400>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART2_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usart3: serial@4000f000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x4000f000 0x400>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART3_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@40010000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40010000 0x400>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART4_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@40011000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40011000 0x400>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART5_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@40012000 {
|
|
compatible = "st,stm32f7-i2c";
|
|
reg = <0x40012000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C1_K>;
|
|
resets = <&rcc I2C1_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@40013000 {
|
|
compatible = "st,stm32f7-i2c";
|
|
reg = <0x40013000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C2_K>;
|
|
resets = <&rcc I2C2_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@40014000 {
|
|
compatible = "st,stm32f7-i2c";
|
|
reg = <0x40014000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C3_K>;
|
|
resets = <&rcc I2C3_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@40015000 {
|
|
compatible = "st,stm32f7-i2c";
|
|
reg = <0x40015000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C5_K>;
|
|
resets = <&rcc I2C5_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
cec: cec@40016000 {
|
|
compatible = "st,stm32-cec";
|
|
reg = <0x40016000 0x400>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc CEC_K>, <&clk_lse>;
|
|
clock-names = "cec", "hdmi-cec";
|
|
status = "disabled";
|
|
};
|
|
|
|
dac: dac@40017000 {
|
|
compatible = "st,stm32h7-dac-core";
|
|
reg = <0x40017000 0x400>;
|
|
clocks = <&rcc DAC12>;
|
|
clock-names = "pclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
|
|
dac1: dac@1 {
|
|
compatible = "st,stm32-dac";
|
|
#io-channels-cells = <1>;
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dac2: dac@2 {
|
|
compatible = "st,stm32-dac";
|
|
#io-channels-cells = <1>;
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
uart7: serial@40018000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40018000 0x400>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART7_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart8: serial@40019000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40019000 0x400>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART8_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timers1: timer@44000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44000000 0x400>;
|
|
clocks = <&rcc TIM1_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@0 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers8: timer@44001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44001000 0x400>;
|
|
clocks = <&rcc TIM8_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@7 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <7>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usart6: serial@44003000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x44003000 0x400>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART6_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timers15: timer@44006000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44006000 0x400>;
|
|
clocks = <&rcc TIM15_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@14 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <14>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers16: timer@44007000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44007000 0x400>;
|
|
clocks = <&rcc TIM16_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
timer@15 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <15>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers17: timer@44008000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44008000 0x400>;
|
|
clocks = <&rcc TIM17_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@16 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <16>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
dma1: dma@48000000 {
|
|
compatible = "st,stm32-dma";
|
|
reg = <0x48000000 0x400>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc DMA1>;
|
|
#dma-cells = <4>;
|
|
st,mem2mem;
|
|
dma-requests = <8>;
|
|
};
|
|
|
|
dma2: dma@48001000 {
|
|
compatible = "st,stm32-dma";
|
|
reg = <0x48001000 0x400>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc DMA2>;
|
|
#dma-cells = <4>;
|
|
st,mem2mem;
|
|
dma-requests = <8>;
|
|
};
|
|
|
|
dmamux1: dma-router@48002000 {
|
|
compatible = "st,stm32h7-dmamux";
|
|
reg = <0x48002000 0x1c>;
|
|
#dma-cells = <3>;
|
|
dma-requests = <128>;
|
|
dma-masters = <&dma1 &dma2>;
|
|
dma-channels = <16>;
|
|
clocks = <&rcc DMAMUX>;
|
|
};
|
|
|
|
rcc: rcc@50000000 {
|
|
compatible = "st,stm32mp1-rcc", "syscon";
|
|
reg = <0x50000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
exti: interrupt-controller@5000d000 {
|
|
compatible = "st,stm32mp1-exti", "syscon";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x5000d000 0x400>;
|
|
};
|
|
|
|
lptimer2: timer@50021000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50021000 0x400>;
|
|
clocks = <&rcc LPTIM2_K>;
|
|
clock-names = "mux";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
trigger@1 {
|
|
compatible = "st,stm32-lptimer-trigger";
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-lptimer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer3: timer@50022000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50022000 0x400>;
|
|
clocks = <&rcc LPTIM3_K>;
|
|
clock-names = "mux";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
trigger@2 {
|
|
compatible = "st,stm32-lptimer-trigger";
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer4: timer@50023000 {
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50023000 0x400>;
|
|
clocks = <&rcc LPTIM4_K>;
|
|
clock-names = "mux";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer5: timer@50024000 {
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50024000 0x400>;
|
|
clocks = <&rcc LPTIM5_K>;
|
|
clock-names = "mux";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
vrefbuf: vrefbuf@50025000 {
|
|
compatible = "st,stm32-vrefbuf";
|
|
reg = <0x50025000 0x8>;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
clocks = <&rcc VREF>;
|
|
status = "disabled";
|
|
};
|
|
|
|
cryp1: cryp@54001000 {
|
|
compatible = "st,stm32mp1-cryp";
|
|
reg = <0x54001000 0x400>;
|
|
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc CRYP1>;
|
|
resets = <&rcc CRYP1_R>;
|
|
status = "disabled";
|
|
};
|
|
|
|
rng1: rng@54003000 {
|
|
compatible = "st,stm32-rng";
|
|
reg = <0x54003000 0x400>;
|
|
clocks = <&rcc RNG1_K>;
|
|
resets = <&rcc RNG1_R>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdma1: dma@58000000 {
|
|
compatible = "st,stm32h7-mdma";
|
|
reg = <0x58000000 0x1000>;
|
|
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc MDMA>;
|
|
#dma-cells = <5>;
|
|
dma-channels = <32>;
|
|
dma-requests = <48>;
|
|
};
|
|
|
|
qspi: qspi@58003000 {
|
|
compatible = "st,stm32f469-qspi";
|
|
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
|
|
reg-names = "qspi", "qspi_mm";
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc QSPI_K>;
|
|
resets = <&rcc QSPI_R>;
|
|
status = "disabled";
|
|
};
|
|
|
|
crc1: crc@58009000 {
|
|
compatible = "st,stm32f7-crc";
|
|
reg = <0x58009000 0x400>;
|
|
clocks = <&rcc CRC1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh_ohci: usbh-ohci@5800c000 {
|
|
compatible = "generic-ohci";
|
|
reg = <0x5800c000 0x1000>;
|
|
clocks = <&rcc USBH>;
|
|
resets = <&rcc USBH_R>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh_ehci: usbh-ehci@5800d000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x5800d000 0x1000>;
|
|
clocks = <&rcc USBH>;
|
|
resets = <&rcc USBH_R>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
companion = <&usbh_ohci>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dsi: dsi@5a000000 {
|
|
compatible = "st,stm32-dsi";
|
|
reg = <0x5a000000 0x800>;
|
|
clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
|
|
clock-names = "pclk", "ref", "px_clk";
|
|
resets = <&rcc DSI_R>;
|
|
reset-names = "apb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ltdc: display-controller@5a001000 {
|
|
compatible = "st,stm32-ltdc";
|
|
reg = <0x5a001000 0x400>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc LTDC_PX>;
|
|
clock-names = "lcd";
|
|
resets = <&rcc LTDC_R>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbphyc: usbphyc@5a006000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32mp1-usbphyc";
|
|
reg = <0x5a006000 0x1000>;
|
|
clocks = <&rcc USBPHY_K>;
|
|
resets = <&rcc USBPHY_R>;
|
|
status = "disabled";
|
|
|
|
usbphyc_port0: usb-phy@0 {
|
|
#phy-cells = <0>;
|
|
reg = <0>;
|
|
};
|
|
|
|
usbphyc_port1: usb-phy@1 {
|
|
#phy-cells = <1>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
usart1: serial@5c000000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x5c000000 0x400>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART1_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@5c002000 {
|
|
compatible = "st,stm32f7-i2c";
|
|
reg = <0x5c002000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C4_K>;
|
|
resets = <&rcc I2C4_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c6: i2c@5c009000 {
|
|
compatible = "st,stm32f7-i2c";
|
|
reg = <0x5c009000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C6_K>;
|
|
resets = <&rcc I2C6_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|