mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 16:56:53 +07:00
9712ada7c0
This removes the #address-cells and #size-cells properties from the gpio-keys node in the da850-lego-ev3 device tree. These properties are not needed since the child nodes don't have a reg property. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
353 lines
6.6 KiB
Plaintext
353 lines
6.6 KiB
Plaintext
/*
|
|
* Device tree for LEGO MINDSTORMS EV3
|
|
*
|
|
* Copyright (C) 2017 David Lechner <david@lechnology.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation, version 2.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
#include "da850.dtsi"
|
|
|
|
/ {
|
|
compatible = "lego,ev3", "ti,da850";
|
|
model = "LEGO MINDSTORMS EV3";
|
|
|
|
aliases {
|
|
serial1 = &serial1;
|
|
};
|
|
|
|
memory@c0000000 {
|
|
device_type = "memory";
|
|
reg = <0xc0000000 0x04000000>;
|
|
};
|
|
|
|
/*
|
|
* The buttons on the EV3 are mapped to keyboard keys.
|
|
*/
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
label = "EV3 Brick Buttons";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&button_bias>;
|
|
|
|
center {
|
|
label = "Center";
|
|
linux,code = <KEY_ENTER>;
|
|
gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
left {
|
|
label = "Left";
|
|
linux,code = <KEY_LEFT>;
|
|
gpios = <&gpio 102 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
back {
|
|
label = "Back";
|
|
linux,code = <KEY_BACKSPACE>;
|
|
gpios = <&gpio 106 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
right {
|
|
label = "Right";
|
|
linux,code = <KEY_RIGHT>;
|
|
gpios = <&gpio 124 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
down {
|
|
label = "Down";
|
|
linux,code = <KEY_DOWN>;
|
|
gpios = <&gpio 126 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
up {
|
|
label = "Up";
|
|
linux,code = <KEY_UP>;
|
|
gpios = <&gpio 127 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* The EV3 has two built-in bi-color LEDs behind the buttons.
|
|
*/
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
left_green {
|
|
label = "led0:green:brick-status";
|
|
/* GP6[13] */
|
|
gpios = <&gpio 103 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
right_red {
|
|
label = "led1:red:brick-status";
|
|
/* GP6[7] */
|
|
gpios = <&gpio 108 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
left_red {
|
|
label = "led0:red:brick-status";
|
|
/* GP6[12] */
|
|
gpios = <&gpio 109 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
right_green {
|
|
label = "led1:green:brick-status";
|
|
/* GP6[14] */
|
|
gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
};
|
|
|
|
/*
|
|
* The EV3 is powered down by turning off the main 5V supply.
|
|
*/
|
|
gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
gpios = <&gpio 107 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "pwm-beeper";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ehrpwm0b_pins>;
|
|
pwms = <&ehrpwm0 1 1000000 0>;
|
|
amp-supply = <&>;
|
|
};
|
|
|
|
/*
|
|
* This is a 5V current limiting regulator that is shared by USB,
|
|
* the sensor (input) ports, the motor (output) ports and the A/DC.
|
|
*/
|
|
vcc5v: regulator1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio 101 0>;
|
|
over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/*
|
|
* This is a simple voltage divider on VCC5V to provide a 2.5V
|
|
* reference signal to the ADC.
|
|
*/
|
|
adc_ref: regulator2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "adc ref";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc5v>;
|
|
};
|
|
|
|
/*
|
|
* This is the amplifier for the speaker.
|
|
*/
|
|
amp: regulator3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "amp";
|
|
gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
/*
|
|
* The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack.
|
|
*/
|
|
battery {
|
|
compatible = "lego,ev3-battery";
|
|
io-channels = <&adc 4>, <&adc 3>;
|
|
io-channel-names = "voltage", "current";
|
|
rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/* ARM local RAM */
|
|
memory@ffff0000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0xffff0000 0x2000>; /* 8k */
|
|
|
|
/*
|
|
* The I2C bootloader looks for this magic value to either
|
|
* boot normally or boot into a firmware update mode.
|
|
*/
|
|
reboot-mode {
|
|
compatible = "syscon-reboot-mode";
|
|
offset = <0x1ffc>;
|
|
mode-normal = <0x00000000>;
|
|
mode-loader = <0x5555aaaa>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmx_core {
|
|
status = "okay";
|
|
|
|
ev3_lcd_pins: pinmux_lcd {
|
|
pinctrl-single,bits = <
|
|
/* SIMO, CLK */
|
|
0x14 0x00100100 0x00f00f00
|
|
>;
|
|
};
|
|
};
|
|
|
|
&pinconf {
|
|
status = "okay";
|
|
|
|
/* Buttons have external pulldown resistors */
|
|
button_bias: button-bias-groups {
|
|
disable {
|
|
groups = "cp5", "cp24", "cp25", "cp28";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Input port 1 */
|
|
&serial1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&serial1_rxtx_pins>;
|
|
};
|
|
|
|
&rtc0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
|
|
/*
|
|
* EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC.
|
|
*/
|
|
eeprom@50 {
|
|
compatible = "microchip,24c128", "atmel,24c128";
|
|
pagesize = <64>;
|
|
read-only;
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
status = "okay";
|
|
max-frequency = <50000000>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>, <&spi0_cs3_pin>;
|
|
|
|
flash@0 {
|
|
compatible = "n25q128a13", "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
ti,spi-wdelay = <8>;
|
|
|
|
/* Partitions are based on the official firmware from LEGO */
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "U-Boot";
|
|
reg = <0 0x40000>;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "U-Boot Env";
|
|
reg = <0x40000 0x10000>;
|
|
};
|
|
|
|
partition@50000 {
|
|
label = "Kernel";
|
|
reg = <0x50000 0x200000>;
|
|
};
|
|
|
|
partition@250000 {
|
|
label = "Filesystem";
|
|
reg = <0x250000 0xa50000>;
|
|
};
|
|
|
|
partition@cb0000 {
|
|
label = "Storage";
|
|
reg = <0xcb0000 0x2f0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
adc: adc@3 {
|
|
compatible = "ti,ads7957";
|
|
reg = <3>;
|
|
#io-channel-cells = <1>;
|
|
spi-max-frequency = <10000000>;
|
|
vref-supply = <&adc_ref>;
|
|
};
|
|
};
|
|
|
|
&spi1 {
|
|
status = "okay";
|
|
pinctrl-0 = <&ev3_lcd_pins>;
|
|
pinctrl-names = "default";
|
|
cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
|
|
|
display@0{
|
|
compatible = "lego,ev3-lcd";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&ehrpwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio {
|
|
status = "okay";
|
|
|
|
/* Don't pull down battery voltage adc io channel */
|
|
batt_volt_en {
|
|
gpio-hog;
|
|
gpios = <6 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
status = "okay";
|
|
vbus-supply = <&vcc5v>;
|
|
};
|