mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 01:36:41 +07:00
ed8cf436ca
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1402 lines
34 KiB
C
1402 lines
34 KiB
C
/* $Id: plip.c,v 1.3.6.2 1997/04/16 15:07:56 phil Exp $ */
|
|
/* PLIP: A parallel port "network" driver for Linux. */
|
|
/* This driver is for parallel port with 5-bit cable (LapLink (R) cable). */
|
|
/*
|
|
* Authors: Donald Becker <becker@scyld.com>
|
|
* Tommy Thorn <thorn@daimi.aau.dk>
|
|
* Tanabe Hiroyasu <hiro@sanpo.t.u-tokyo.ac.jp>
|
|
* Alan Cox <gw4pts@gw4pts.ampr.org>
|
|
* Peter Bauer <100136.3530@compuserve.com>
|
|
* Niibe Yutaka <gniibe@mri.co.jp>
|
|
* Nimrod Zimerman <zimerman@mailandnews.com>
|
|
*
|
|
* Enhancements:
|
|
* Modularization and ifreq/ifmap support by Alan Cox.
|
|
* Rewritten by Niibe Yutaka.
|
|
* parport-sharing awareness code by Philip Blundell.
|
|
* SMP locking by Niibe Yutaka.
|
|
* Support for parallel ports with no IRQ (poll mode),
|
|
* Modifications to use the parallel port API
|
|
* by Nimrod Zimerman.
|
|
*
|
|
* Fixes:
|
|
* Niibe Yutaka
|
|
* - Module initialization.
|
|
* - MTU fix.
|
|
* - Make sure other end is OK, before sending a packet.
|
|
* - Fix immediate timer problem.
|
|
*
|
|
* Al Viro
|
|
* - Changed {enable,disable}_irq handling to make it work
|
|
* with new ("stack") semantics.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
/*
|
|
* Original version and the name 'PLIP' from Donald Becker <becker@scyld.com>
|
|
* inspired by Russ Nelson's parallel port packet driver.
|
|
*
|
|
* NOTE:
|
|
* Tanabe Hiroyasu had changed the protocol, and it was in Linux v1.0.
|
|
* Because of the necessity to communicate to DOS machines with the
|
|
* Crynwr packet driver, Peter Bauer changed the protocol again
|
|
* back to original protocol.
|
|
*
|
|
* This version follows original PLIP protocol.
|
|
* So, this PLIP can't communicate the PLIP of Linux v1.0.
|
|
*/
|
|
|
|
/*
|
|
* To use with DOS box, please do (Turn on ARP switch):
|
|
* # ifconfig plip[0-2] arp
|
|
*/
|
|
static const char version[] = "NET3 PLIP version 2.4-parport gniibe@mri.co.jp\n";
|
|
|
|
/*
|
|
Sources:
|
|
Ideas and protocols came from Russ Nelson's <nelson@crynwr.com>
|
|
"parallel.asm" parallel port packet driver.
|
|
|
|
The "Crynwr" parallel port standard specifies the following protocol:
|
|
Trigger by sending nibble '0x8' (this causes interrupt on other end)
|
|
count-low octet
|
|
count-high octet
|
|
... data octets
|
|
checksum octet
|
|
Each octet is sent as <wait for rx. '0x1?'> <send 0x10+(octet&0x0F)>
|
|
<wait for rx. '0x0?'> <send 0x00+((octet>>4)&0x0F)>
|
|
|
|
The packet is encapsulated as if it were ethernet.
|
|
|
|
The cable used is a de facto standard parallel null cable -- sold as
|
|
a "LapLink" cable by various places. You'll need a 12-conductor cable to
|
|
make one yourself. The wiring is:
|
|
SLCTIN 17 - 17
|
|
GROUND 25 - 25
|
|
D0->ERROR 2 - 15 15 - 2
|
|
D1->SLCT 3 - 13 13 - 3
|
|
D2->PAPOUT 4 - 12 12 - 4
|
|
D3->ACK 5 - 10 10 - 5
|
|
D4->BUSY 6 - 11 11 - 6
|
|
Do not connect the other pins. They are
|
|
D5,D6,D7 are 7,8,9
|
|
STROBE is 1, FEED is 14, INIT is 16
|
|
extra grounds are 18,19,20,21,22,23,24
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/string.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/in.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/inetdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/if_plip.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/parport.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <net/neighbour.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
/* Maximum number of devices to support. */
|
|
#define PLIP_MAX 8
|
|
|
|
/* Use 0 for production, 1 for verification, >2 for debug */
|
|
#ifndef NET_DEBUG
|
|
#define NET_DEBUG 1
|
|
#endif
|
|
static const unsigned int net_debug = NET_DEBUG;
|
|
|
|
#define ENABLE(irq) if (irq != -1) enable_irq(irq)
|
|
#define DISABLE(irq) if (irq != -1) disable_irq(irq)
|
|
|
|
/* In micro second */
|
|
#define PLIP_DELAY_UNIT 1
|
|
|
|
/* Connection time out = PLIP_TRIGGER_WAIT * PLIP_DELAY_UNIT usec */
|
|
#define PLIP_TRIGGER_WAIT 500
|
|
|
|
/* Nibble time out = PLIP_NIBBLE_WAIT * PLIP_DELAY_UNIT usec */
|
|
#define PLIP_NIBBLE_WAIT 3000
|
|
|
|
/* Bottom halves */
|
|
static void plip_kick_bh(struct work_struct *work);
|
|
static void plip_bh(struct work_struct *work);
|
|
static void plip_timer_bh(struct work_struct *work);
|
|
|
|
/* Interrupt handler */
|
|
static void plip_interrupt(void *dev_id);
|
|
|
|
/* Functions for DEV methods */
|
|
static int plip_tx_packet(struct sk_buff *skb, struct net_device *dev);
|
|
static int plip_hard_header(struct sk_buff *skb, struct net_device *dev,
|
|
unsigned short type, const void *daddr,
|
|
const void *saddr, unsigned len);
|
|
static int plip_hard_header_cache(const struct neighbour *neigh,
|
|
struct hh_cache *hh);
|
|
static int plip_open(struct net_device *dev);
|
|
static int plip_close(struct net_device *dev);
|
|
static int plip_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
|
|
static int plip_preempt(void *handle);
|
|
static void plip_wakeup(void *handle);
|
|
|
|
enum plip_connection_state {
|
|
PLIP_CN_NONE=0,
|
|
PLIP_CN_RECEIVE,
|
|
PLIP_CN_SEND,
|
|
PLIP_CN_CLOSING,
|
|
PLIP_CN_ERROR
|
|
};
|
|
|
|
enum plip_packet_state {
|
|
PLIP_PK_DONE=0,
|
|
PLIP_PK_TRIGGER,
|
|
PLIP_PK_LENGTH_LSB,
|
|
PLIP_PK_LENGTH_MSB,
|
|
PLIP_PK_DATA,
|
|
PLIP_PK_CHECKSUM
|
|
};
|
|
|
|
enum plip_nibble_state {
|
|
PLIP_NB_BEGIN,
|
|
PLIP_NB_1,
|
|
PLIP_NB_2,
|
|
};
|
|
|
|
struct plip_local {
|
|
enum plip_packet_state state;
|
|
enum plip_nibble_state nibble;
|
|
union {
|
|
struct {
|
|
#if defined(__LITTLE_ENDIAN)
|
|
unsigned char lsb;
|
|
unsigned char msb;
|
|
#elif defined(__BIG_ENDIAN)
|
|
unsigned char msb;
|
|
unsigned char lsb;
|
|
#else
|
|
#error "Please fix the endianness defines in <asm/byteorder.h>"
|
|
#endif
|
|
} b;
|
|
unsigned short h;
|
|
} length;
|
|
unsigned short byte;
|
|
unsigned char checksum;
|
|
unsigned char data;
|
|
struct sk_buff *skb;
|
|
};
|
|
|
|
struct net_local {
|
|
struct net_device *dev;
|
|
struct work_struct immediate;
|
|
struct delayed_work deferred;
|
|
struct delayed_work timer;
|
|
struct plip_local snd_data;
|
|
struct plip_local rcv_data;
|
|
struct pardevice *pardev;
|
|
unsigned long trigger;
|
|
unsigned long nibble;
|
|
enum plip_connection_state connection;
|
|
unsigned short timeout_count;
|
|
int is_deferred;
|
|
int port_owner;
|
|
int should_relinquish;
|
|
spinlock_t lock;
|
|
atomic_t kill_timer;
|
|
struct completion killed_timer_cmp;
|
|
};
|
|
|
|
static inline void enable_parport_interrupts (struct net_device *dev)
|
|
{
|
|
if (dev->irq != -1)
|
|
{
|
|
struct parport *port =
|
|
((struct net_local *)netdev_priv(dev))->pardev->port;
|
|
port->ops->enable_irq (port);
|
|
}
|
|
}
|
|
|
|
static inline void disable_parport_interrupts (struct net_device *dev)
|
|
{
|
|
if (dev->irq != -1)
|
|
{
|
|
struct parport *port =
|
|
((struct net_local *)netdev_priv(dev))->pardev->port;
|
|
port->ops->disable_irq (port);
|
|
}
|
|
}
|
|
|
|
static inline void write_data (struct net_device *dev, unsigned char data)
|
|
{
|
|
struct parport *port =
|
|
((struct net_local *)netdev_priv(dev))->pardev->port;
|
|
|
|
port->ops->write_data (port, data);
|
|
}
|
|
|
|
static inline unsigned char read_status (struct net_device *dev)
|
|
{
|
|
struct parport *port =
|
|
((struct net_local *)netdev_priv(dev))->pardev->port;
|
|
|
|
return port->ops->read_status (port);
|
|
}
|
|
|
|
static const struct header_ops plip_header_ops = {
|
|
.create = plip_hard_header,
|
|
.cache = plip_hard_header_cache,
|
|
};
|
|
|
|
static const struct net_device_ops plip_netdev_ops = {
|
|
.ndo_open = plip_open,
|
|
.ndo_stop = plip_close,
|
|
.ndo_start_xmit = plip_tx_packet,
|
|
.ndo_do_ioctl = plip_ioctl,
|
|
};
|
|
|
|
/* Entry point of PLIP driver.
|
|
Probe the hardware, and register/initialize the driver.
|
|
|
|
PLIP is rather weird, because of the way it interacts with the parport
|
|
system. It is _not_ initialised from Space.c. Instead, plip_init()
|
|
is called, and that function makes up a "struct net_device" for each port, and
|
|
then calls us here.
|
|
|
|
*/
|
|
static void
|
|
plip_init_netdev(struct net_device *dev)
|
|
{
|
|
struct net_local *nl = netdev_priv(dev);
|
|
|
|
/* Then, override parts of it */
|
|
dev->tx_queue_len = 10;
|
|
dev->flags = IFF_POINTOPOINT|IFF_NOARP;
|
|
memset(dev->dev_addr, 0xfc, ETH_ALEN);
|
|
|
|
dev->netdev_ops = &plip_netdev_ops;
|
|
dev->header_ops = &plip_header_ops;
|
|
|
|
|
|
nl->port_owner = 0;
|
|
|
|
/* Initialize constants */
|
|
nl->trigger = PLIP_TRIGGER_WAIT;
|
|
nl->nibble = PLIP_NIBBLE_WAIT;
|
|
|
|
/* Initialize task queue structures */
|
|
INIT_WORK(&nl->immediate, plip_bh);
|
|
INIT_DELAYED_WORK(&nl->deferred, plip_kick_bh);
|
|
|
|
if (dev->irq == -1)
|
|
INIT_DELAYED_WORK(&nl->timer, plip_timer_bh);
|
|
|
|
spin_lock_init(&nl->lock);
|
|
}
|
|
|
|
/* Bottom half handler for the delayed request.
|
|
This routine is kicked by do_timer().
|
|
Request `plip_bh' to be invoked. */
|
|
static void
|
|
plip_kick_bh(struct work_struct *work)
|
|
{
|
|
struct net_local *nl =
|
|
container_of(work, struct net_local, deferred.work);
|
|
|
|
if (nl->is_deferred)
|
|
schedule_work(&nl->immediate);
|
|
}
|
|
|
|
/* Forward declarations of internal routines */
|
|
static int plip_none(struct net_device *, struct net_local *,
|
|
struct plip_local *, struct plip_local *);
|
|
static int plip_receive_packet(struct net_device *, struct net_local *,
|
|
struct plip_local *, struct plip_local *);
|
|
static int plip_send_packet(struct net_device *, struct net_local *,
|
|
struct plip_local *, struct plip_local *);
|
|
static int plip_connection_close(struct net_device *, struct net_local *,
|
|
struct plip_local *, struct plip_local *);
|
|
static int plip_error(struct net_device *, struct net_local *,
|
|
struct plip_local *, struct plip_local *);
|
|
static int plip_bh_timeout_error(struct net_device *dev, struct net_local *nl,
|
|
struct plip_local *snd,
|
|
struct plip_local *rcv,
|
|
int error);
|
|
|
|
#define OK 0
|
|
#define TIMEOUT 1
|
|
#define ERROR 2
|
|
#define HS_TIMEOUT 3
|
|
|
|
typedef int (*plip_func)(struct net_device *dev, struct net_local *nl,
|
|
struct plip_local *snd, struct plip_local *rcv);
|
|
|
|
static const plip_func connection_state_table[] =
|
|
{
|
|
plip_none,
|
|
plip_receive_packet,
|
|
plip_send_packet,
|
|
plip_connection_close,
|
|
plip_error
|
|
};
|
|
|
|
/* Bottom half handler of PLIP. */
|
|
static void
|
|
plip_bh(struct work_struct *work)
|
|
{
|
|
struct net_local *nl = container_of(work, struct net_local, immediate);
|
|
struct plip_local *snd = &nl->snd_data;
|
|
struct plip_local *rcv = &nl->rcv_data;
|
|
plip_func f;
|
|
int r;
|
|
|
|
nl->is_deferred = 0;
|
|
f = connection_state_table[nl->connection];
|
|
if ((r = (*f)(nl->dev, nl, snd, rcv)) != OK
|
|
&& (r = plip_bh_timeout_error(nl->dev, nl, snd, rcv, r)) != OK) {
|
|
nl->is_deferred = 1;
|
|
schedule_delayed_work(&nl->deferred, 1);
|
|
}
|
|
}
|
|
|
|
static void
|
|
plip_timer_bh(struct work_struct *work)
|
|
{
|
|
struct net_local *nl =
|
|
container_of(work, struct net_local, timer.work);
|
|
|
|
if (!(atomic_read (&nl->kill_timer))) {
|
|
plip_interrupt (nl->dev);
|
|
|
|
schedule_delayed_work(&nl->timer, 1);
|
|
}
|
|
else {
|
|
complete(&nl->killed_timer_cmp);
|
|
}
|
|
}
|
|
|
|
static int
|
|
plip_bh_timeout_error(struct net_device *dev, struct net_local *nl,
|
|
struct plip_local *snd, struct plip_local *rcv,
|
|
int error)
|
|
{
|
|
unsigned char c0;
|
|
/*
|
|
* This is tricky. If we got here from the beginning of send (either
|
|
* with ERROR or HS_TIMEOUT) we have IRQ enabled. Otherwise it's
|
|
* already disabled. With the old variant of {enable,disable}_irq()
|
|
* extra disable_irq() was a no-op. Now it became mortal - it's
|
|
* unbalanced and thus we'll never re-enable IRQ (until rmmod plip,
|
|
* that is). So we have to treat HS_TIMEOUT and ERROR from send
|
|
* in a special way.
|
|
*/
|
|
|
|
spin_lock_irq(&nl->lock);
|
|
if (nl->connection == PLIP_CN_SEND) {
|
|
|
|
if (error != ERROR) { /* Timeout */
|
|
nl->timeout_count++;
|
|
if ((error == HS_TIMEOUT
|
|
&& nl->timeout_count <= 10)
|
|
|| nl->timeout_count <= 3) {
|
|
spin_unlock_irq(&nl->lock);
|
|
/* Try again later */
|
|
return TIMEOUT;
|
|
}
|
|
c0 = read_status(dev);
|
|
printk(KERN_WARNING "%s: transmit timeout(%d,%02x)\n",
|
|
dev->name, snd->state, c0);
|
|
} else
|
|
error = HS_TIMEOUT;
|
|
dev->stats.tx_errors++;
|
|
dev->stats.tx_aborted_errors++;
|
|
} else if (nl->connection == PLIP_CN_RECEIVE) {
|
|
if (rcv->state == PLIP_PK_TRIGGER) {
|
|
/* Transmission was interrupted. */
|
|
spin_unlock_irq(&nl->lock);
|
|
return OK;
|
|
}
|
|
if (error != ERROR) { /* Timeout */
|
|
if (++nl->timeout_count <= 3) {
|
|
spin_unlock_irq(&nl->lock);
|
|
/* Try again later */
|
|
return TIMEOUT;
|
|
}
|
|
c0 = read_status(dev);
|
|
printk(KERN_WARNING "%s: receive timeout(%d,%02x)\n",
|
|
dev->name, rcv->state, c0);
|
|
}
|
|
dev->stats.rx_dropped++;
|
|
}
|
|
rcv->state = PLIP_PK_DONE;
|
|
if (rcv->skb) {
|
|
kfree_skb(rcv->skb);
|
|
rcv->skb = NULL;
|
|
}
|
|
snd->state = PLIP_PK_DONE;
|
|
if (snd->skb) {
|
|
dev_kfree_skb(snd->skb);
|
|
snd->skb = NULL;
|
|
}
|
|
spin_unlock_irq(&nl->lock);
|
|
if (error == HS_TIMEOUT) {
|
|
DISABLE(dev->irq);
|
|
synchronize_irq(dev->irq);
|
|
}
|
|
disable_parport_interrupts (dev);
|
|
netif_stop_queue (dev);
|
|
nl->connection = PLIP_CN_ERROR;
|
|
write_data (dev, 0x00);
|
|
|
|
return TIMEOUT;
|
|
}
|
|
|
|
static int
|
|
plip_none(struct net_device *dev, struct net_local *nl,
|
|
struct plip_local *snd, struct plip_local *rcv)
|
|
{
|
|
return OK;
|
|
}
|
|
|
|
/* PLIP_RECEIVE --- receive a byte(two nibbles)
|
|
Returns OK on success, TIMEOUT on timeout */
|
|
static inline int
|
|
plip_receive(unsigned short nibble_timeout, struct net_device *dev,
|
|
enum plip_nibble_state *ns_p, unsigned char *data_p)
|
|
{
|
|
unsigned char c0, c1;
|
|
unsigned int cx;
|
|
|
|
switch (*ns_p) {
|
|
case PLIP_NB_BEGIN:
|
|
cx = nibble_timeout;
|
|
while (1) {
|
|
c0 = read_status(dev);
|
|
udelay(PLIP_DELAY_UNIT);
|
|
if ((c0 & 0x80) == 0) {
|
|
c1 = read_status(dev);
|
|
if (c0 == c1)
|
|
break;
|
|
}
|
|
if (--cx == 0)
|
|
return TIMEOUT;
|
|
}
|
|
*data_p = (c0 >> 3) & 0x0f;
|
|
write_data (dev, 0x10); /* send ACK */
|
|
*ns_p = PLIP_NB_1;
|
|
|
|
case PLIP_NB_1:
|
|
cx = nibble_timeout;
|
|
while (1) {
|
|
c0 = read_status(dev);
|
|
udelay(PLIP_DELAY_UNIT);
|
|
if (c0 & 0x80) {
|
|
c1 = read_status(dev);
|
|
if (c0 == c1)
|
|
break;
|
|
}
|
|
if (--cx == 0)
|
|
return TIMEOUT;
|
|
}
|
|
*data_p |= (c0 << 1) & 0xf0;
|
|
write_data (dev, 0x00); /* send ACK */
|
|
*ns_p = PLIP_NB_BEGIN;
|
|
case PLIP_NB_2:
|
|
break;
|
|
}
|
|
return OK;
|
|
}
|
|
|
|
/*
|
|
* Determine the packet's protocol ID. The rule here is that we
|
|
* assume 802.3 if the type field is short enough to be a length.
|
|
* This is normal practice and works for any 'now in use' protocol.
|
|
*
|
|
* PLIP is ethernet ish but the daddr might not be valid if unicast.
|
|
* PLIP fortunately has no bus architecture (its Point-to-point).
|
|
*
|
|
* We can't fix the daddr thing as that quirk (more bug) is embedded
|
|
* in far too many old systems not all even running Linux.
|
|
*/
|
|
|
|
static __be16 plip_type_trans(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct ethhdr *eth;
|
|
unsigned char *rawp;
|
|
|
|
skb_reset_mac_header(skb);
|
|
skb_pull(skb,dev->hard_header_len);
|
|
eth = eth_hdr(skb);
|
|
|
|
if(*eth->h_dest&1)
|
|
{
|
|
if(memcmp(eth->h_dest,dev->broadcast, ETH_ALEN)==0)
|
|
skb->pkt_type=PACKET_BROADCAST;
|
|
else
|
|
skb->pkt_type=PACKET_MULTICAST;
|
|
}
|
|
|
|
/*
|
|
* This ALLMULTI check should be redundant by 1.4
|
|
* so don't forget to remove it.
|
|
*/
|
|
|
|
if (ntohs(eth->h_proto) >= 1536)
|
|
return eth->h_proto;
|
|
|
|
rawp = skb->data;
|
|
|
|
/*
|
|
* This is a magic hack to spot IPX packets. Older Novell breaks
|
|
* the protocol design and runs IPX over 802.3 without an 802.2 LLC
|
|
* layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
|
|
* won't work for fault tolerant netware but does for the rest.
|
|
*/
|
|
if (*(unsigned short *)rawp == 0xFFFF)
|
|
return htons(ETH_P_802_3);
|
|
|
|
/*
|
|
* Real 802.2 LLC
|
|
*/
|
|
return htons(ETH_P_802_2);
|
|
}
|
|
|
|
/* PLIP_RECEIVE_PACKET --- receive a packet */
|
|
static int
|
|
plip_receive_packet(struct net_device *dev, struct net_local *nl,
|
|
struct plip_local *snd, struct plip_local *rcv)
|
|
{
|
|
unsigned short nibble_timeout = nl->nibble;
|
|
unsigned char *lbuf;
|
|
|
|
switch (rcv->state) {
|
|
case PLIP_PK_TRIGGER:
|
|
DISABLE(dev->irq);
|
|
/* Don't need to synchronize irq, as we can safely ignore it */
|
|
disable_parport_interrupts (dev);
|
|
write_data (dev, 0x01); /* send ACK */
|
|
if (net_debug > 2)
|
|
printk(KERN_DEBUG "%s: receive start\n", dev->name);
|
|
rcv->state = PLIP_PK_LENGTH_LSB;
|
|
rcv->nibble = PLIP_NB_BEGIN;
|
|
|
|
case PLIP_PK_LENGTH_LSB:
|
|
if (snd->state != PLIP_PK_DONE) {
|
|
if (plip_receive(nl->trigger, dev,
|
|
&rcv->nibble, &rcv->length.b.lsb)) {
|
|
/* collision, here dev->tbusy == 1 */
|
|
rcv->state = PLIP_PK_DONE;
|
|
nl->is_deferred = 1;
|
|
nl->connection = PLIP_CN_SEND;
|
|
schedule_delayed_work(&nl->deferred, 1);
|
|
enable_parport_interrupts (dev);
|
|
ENABLE(dev->irq);
|
|
return OK;
|
|
}
|
|
} else {
|
|
if (plip_receive(nibble_timeout, dev,
|
|
&rcv->nibble, &rcv->length.b.lsb))
|
|
return TIMEOUT;
|
|
}
|
|
rcv->state = PLIP_PK_LENGTH_MSB;
|
|
|
|
case PLIP_PK_LENGTH_MSB:
|
|
if (plip_receive(nibble_timeout, dev,
|
|
&rcv->nibble, &rcv->length.b.msb))
|
|
return TIMEOUT;
|
|
if (rcv->length.h > dev->mtu + dev->hard_header_len
|
|
|| rcv->length.h < 8) {
|
|
printk(KERN_WARNING "%s: bogus packet size %d.\n", dev->name, rcv->length.h);
|
|
return ERROR;
|
|
}
|
|
/* Malloc up new buffer. */
|
|
rcv->skb = dev_alloc_skb(rcv->length.h + 2);
|
|
if (rcv->skb == NULL) {
|
|
printk(KERN_ERR "%s: Memory squeeze.\n", dev->name);
|
|
return ERROR;
|
|
}
|
|
skb_reserve(rcv->skb, 2); /* Align IP on 16 byte boundaries */
|
|
skb_put(rcv->skb,rcv->length.h);
|
|
rcv->skb->dev = dev;
|
|
rcv->state = PLIP_PK_DATA;
|
|
rcv->byte = 0;
|
|
rcv->checksum = 0;
|
|
|
|
case PLIP_PK_DATA:
|
|
lbuf = rcv->skb->data;
|
|
do {
|
|
if (plip_receive(nibble_timeout, dev,
|
|
&rcv->nibble, &lbuf[rcv->byte]))
|
|
return TIMEOUT;
|
|
} while (++rcv->byte < rcv->length.h);
|
|
do {
|
|
rcv->checksum += lbuf[--rcv->byte];
|
|
} while (rcv->byte);
|
|
rcv->state = PLIP_PK_CHECKSUM;
|
|
|
|
case PLIP_PK_CHECKSUM:
|
|
if (plip_receive(nibble_timeout, dev,
|
|
&rcv->nibble, &rcv->data))
|
|
return TIMEOUT;
|
|
if (rcv->data != rcv->checksum) {
|
|
dev->stats.rx_crc_errors++;
|
|
if (net_debug)
|
|
printk(KERN_DEBUG "%s: checksum error\n", dev->name);
|
|
return ERROR;
|
|
}
|
|
rcv->state = PLIP_PK_DONE;
|
|
|
|
case PLIP_PK_DONE:
|
|
/* Inform the upper layer for the arrival of a packet. */
|
|
rcv->skb->protocol=plip_type_trans(rcv->skb, dev);
|
|
netif_rx_ni(rcv->skb);
|
|
dev->stats.rx_bytes += rcv->length.h;
|
|
dev->stats.rx_packets++;
|
|
rcv->skb = NULL;
|
|
if (net_debug > 2)
|
|
printk(KERN_DEBUG "%s: receive end\n", dev->name);
|
|
|
|
/* Close the connection. */
|
|
write_data (dev, 0x00);
|
|
spin_lock_irq(&nl->lock);
|
|
if (snd->state != PLIP_PK_DONE) {
|
|
nl->connection = PLIP_CN_SEND;
|
|
spin_unlock_irq(&nl->lock);
|
|
schedule_work(&nl->immediate);
|
|
enable_parport_interrupts (dev);
|
|
ENABLE(dev->irq);
|
|
return OK;
|
|
} else {
|
|
nl->connection = PLIP_CN_NONE;
|
|
spin_unlock_irq(&nl->lock);
|
|
enable_parport_interrupts (dev);
|
|
ENABLE(dev->irq);
|
|
return OK;
|
|
}
|
|
}
|
|
return OK;
|
|
}
|
|
|
|
/* PLIP_SEND --- send a byte (two nibbles)
|
|
Returns OK on success, TIMEOUT when timeout */
|
|
static inline int
|
|
plip_send(unsigned short nibble_timeout, struct net_device *dev,
|
|
enum plip_nibble_state *ns_p, unsigned char data)
|
|
{
|
|
unsigned char c0;
|
|
unsigned int cx;
|
|
|
|
switch (*ns_p) {
|
|
case PLIP_NB_BEGIN:
|
|
write_data (dev, data & 0x0f);
|
|
*ns_p = PLIP_NB_1;
|
|
|
|
case PLIP_NB_1:
|
|
write_data (dev, 0x10 | (data & 0x0f));
|
|
cx = nibble_timeout;
|
|
while (1) {
|
|
c0 = read_status(dev);
|
|
if ((c0 & 0x80) == 0)
|
|
break;
|
|
if (--cx == 0)
|
|
return TIMEOUT;
|
|
udelay(PLIP_DELAY_UNIT);
|
|
}
|
|
write_data (dev, 0x10 | (data >> 4));
|
|
*ns_p = PLIP_NB_2;
|
|
|
|
case PLIP_NB_2:
|
|
write_data (dev, (data >> 4));
|
|
cx = nibble_timeout;
|
|
while (1) {
|
|
c0 = read_status(dev);
|
|
if (c0 & 0x80)
|
|
break;
|
|
if (--cx == 0)
|
|
return TIMEOUT;
|
|
udelay(PLIP_DELAY_UNIT);
|
|
}
|
|
*ns_p = PLIP_NB_BEGIN;
|
|
return OK;
|
|
}
|
|
return OK;
|
|
}
|
|
|
|
/* PLIP_SEND_PACKET --- send a packet */
|
|
static int
|
|
plip_send_packet(struct net_device *dev, struct net_local *nl,
|
|
struct plip_local *snd, struct plip_local *rcv)
|
|
{
|
|
unsigned short nibble_timeout = nl->nibble;
|
|
unsigned char *lbuf;
|
|
unsigned char c0;
|
|
unsigned int cx;
|
|
|
|
if (snd->skb == NULL || (lbuf = snd->skb->data) == NULL) {
|
|
printk(KERN_DEBUG "%s: send skb lost\n", dev->name);
|
|
snd->state = PLIP_PK_DONE;
|
|
snd->skb = NULL;
|
|
return ERROR;
|
|
}
|
|
|
|
switch (snd->state) {
|
|
case PLIP_PK_TRIGGER:
|
|
if ((read_status(dev) & 0xf8) != 0x80)
|
|
return HS_TIMEOUT;
|
|
|
|
/* Trigger remote rx interrupt. */
|
|
write_data (dev, 0x08);
|
|
cx = nl->trigger;
|
|
while (1) {
|
|
udelay(PLIP_DELAY_UNIT);
|
|
spin_lock_irq(&nl->lock);
|
|
if (nl->connection == PLIP_CN_RECEIVE) {
|
|
spin_unlock_irq(&nl->lock);
|
|
/* Interrupted. */
|
|
dev->stats.collisions++;
|
|
return OK;
|
|
}
|
|
c0 = read_status(dev);
|
|
if (c0 & 0x08) {
|
|
spin_unlock_irq(&nl->lock);
|
|
DISABLE(dev->irq);
|
|
synchronize_irq(dev->irq);
|
|
if (nl->connection == PLIP_CN_RECEIVE) {
|
|
/* Interrupted.
|
|
We don't need to enable irq,
|
|
as it is soon disabled. */
|
|
/* Yes, we do. New variant of
|
|
{enable,disable}_irq *counts*
|
|
them. -- AV */
|
|
ENABLE(dev->irq);
|
|
dev->stats.collisions++;
|
|
return OK;
|
|
}
|
|
disable_parport_interrupts (dev);
|
|
if (net_debug > 2)
|
|
printk(KERN_DEBUG "%s: send start\n", dev->name);
|
|
snd->state = PLIP_PK_LENGTH_LSB;
|
|
snd->nibble = PLIP_NB_BEGIN;
|
|
nl->timeout_count = 0;
|
|
break;
|
|
}
|
|
spin_unlock_irq(&nl->lock);
|
|
if (--cx == 0) {
|
|
write_data (dev, 0x00);
|
|
return HS_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
case PLIP_PK_LENGTH_LSB:
|
|
if (plip_send(nibble_timeout, dev,
|
|
&snd->nibble, snd->length.b.lsb))
|
|
return TIMEOUT;
|
|
snd->state = PLIP_PK_LENGTH_MSB;
|
|
|
|
case PLIP_PK_LENGTH_MSB:
|
|
if (plip_send(nibble_timeout, dev,
|
|
&snd->nibble, snd->length.b.msb))
|
|
return TIMEOUT;
|
|
snd->state = PLIP_PK_DATA;
|
|
snd->byte = 0;
|
|
snd->checksum = 0;
|
|
|
|
case PLIP_PK_DATA:
|
|
do {
|
|
if (plip_send(nibble_timeout, dev,
|
|
&snd->nibble, lbuf[snd->byte]))
|
|
return TIMEOUT;
|
|
} while (++snd->byte < snd->length.h);
|
|
do {
|
|
snd->checksum += lbuf[--snd->byte];
|
|
} while (snd->byte);
|
|
snd->state = PLIP_PK_CHECKSUM;
|
|
|
|
case PLIP_PK_CHECKSUM:
|
|
if (plip_send(nibble_timeout, dev,
|
|
&snd->nibble, snd->checksum))
|
|
return TIMEOUT;
|
|
|
|
dev->stats.tx_bytes += snd->skb->len;
|
|
dev_kfree_skb(snd->skb);
|
|
dev->stats.tx_packets++;
|
|
snd->state = PLIP_PK_DONE;
|
|
|
|
case PLIP_PK_DONE:
|
|
/* Close the connection */
|
|
write_data (dev, 0x00);
|
|
snd->skb = NULL;
|
|
if (net_debug > 2)
|
|
printk(KERN_DEBUG "%s: send end\n", dev->name);
|
|
nl->connection = PLIP_CN_CLOSING;
|
|
nl->is_deferred = 1;
|
|
schedule_delayed_work(&nl->deferred, 1);
|
|
enable_parport_interrupts (dev);
|
|
ENABLE(dev->irq);
|
|
return OK;
|
|
}
|
|
return OK;
|
|
}
|
|
|
|
static int
|
|
plip_connection_close(struct net_device *dev, struct net_local *nl,
|
|
struct plip_local *snd, struct plip_local *rcv)
|
|
{
|
|
spin_lock_irq(&nl->lock);
|
|
if (nl->connection == PLIP_CN_CLOSING) {
|
|
nl->connection = PLIP_CN_NONE;
|
|
netif_wake_queue (dev);
|
|
}
|
|
spin_unlock_irq(&nl->lock);
|
|
if (nl->should_relinquish) {
|
|
nl->should_relinquish = nl->port_owner = 0;
|
|
parport_release(nl->pardev);
|
|
}
|
|
return OK;
|
|
}
|
|
|
|
/* PLIP_ERROR --- wait till other end settled */
|
|
static int
|
|
plip_error(struct net_device *dev, struct net_local *nl,
|
|
struct plip_local *snd, struct plip_local *rcv)
|
|
{
|
|
unsigned char status;
|
|
|
|
status = read_status(dev);
|
|
if ((status & 0xf8) == 0x80) {
|
|
if (net_debug > 2)
|
|
printk(KERN_DEBUG "%s: reset interface.\n", dev->name);
|
|
nl->connection = PLIP_CN_NONE;
|
|
nl->should_relinquish = 0;
|
|
netif_start_queue (dev);
|
|
enable_parport_interrupts (dev);
|
|
ENABLE(dev->irq);
|
|
netif_wake_queue (dev);
|
|
} else {
|
|
nl->is_deferred = 1;
|
|
schedule_delayed_work(&nl->deferred, 1);
|
|
}
|
|
|
|
return OK;
|
|
}
|
|
|
|
/* Handle the parallel port interrupts. */
|
|
static void
|
|
plip_interrupt(void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct net_local *nl;
|
|
struct plip_local *rcv;
|
|
unsigned char c0;
|
|
unsigned long flags;
|
|
|
|
nl = netdev_priv(dev);
|
|
rcv = &nl->rcv_data;
|
|
|
|
spin_lock_irqsave (&nl->lock, flags);
|
|
|
|
c0 = read_status(dev);
|
|
if ((c0 & 0xf8) != 0xc0) {
|
|
if ((dev->irq != -1) && (net_debug > 1))
|
|
printk(KERN_DEBUG "%s: spurious interrupt\n", dev->name);
|
|
spin_unlock_irqrestore (&nl->lock, flags);
|
|
return;
|
|
}
|
|
|
|
if (net_debug > 3)
|
|
printk(KERN_DEBUG "%s: interrupt.\n", dev->name);
|
|
|
|
switch (nl->connection) {
|
|
case PLIP_CN_CLOSING:
|
|
netif_wake_queue (dev);
|
|
case PLIP_CN_NONE:
|
|
case PLIP_CN_SEND:
|
|
rcv->state = PLIP_PK_TRIGGER;
|
|
nl->connection = PLIP_CN_RECEIVE;
|
|
nl->timeout_count = 0;
|
|
schedule_work(&nl->immediate);
|
|
break;
|
|
|
|
case PLIP_CN_RECEIVE:
|
|
/* May occur because there is race condition
|
|
around test and set of dev->interrupt.
|
|
Ignore this interrupt. */
|
|
break;
|
|
|
|
case PLIP_CN_ERROR:
|
|
printk(KERN_ERR "%s: receive interrupt in error state\n", dev->name);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&nl->lock, flags);
|
|
}
|
|
|
|
static int
|
|
plip_tx_packet(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct net_local *nl = netdev_priv(dev);
|
|
struct plip_local *snd = &nl->snd_data;
|
|
|
|
if (netif_queue_stopped(dev))
|
|
return 1;
|
|
|
|
/* We may need to grab the bus */
|
|
if (!nl->port_owner) {
|
|
if (parport_claim(nl->pardev))
|
|
return 1;
|
|
nl->port_owner = 1;
|
|
}
|
|
|
|
netif_stop_queue (dev);
|
|
|
|
if (skb->len > dev->mtu + dev->hard_header_len) {
|
|
printk(KERN_WARNING "%s: packet too big, %d.\n", dev->name, (int)skb->len);
|
|
netif_start_queue (dev);
|
|
return 1;
|
|
}
|
|
|
|
if (net_debug > 2)
|
|
printk(KERN_DEBUG "%s: send request\n", dev->name);
|
|
|
|
spin_lock_irq(&nl->lock);
|
|
dev->trans_start = jiffies;
|
|
snd->skb = skb;
|
|
snd->length.h = skb->len;
|
|
snd->state = PLIP_PK_TRIGGER;
|
|
if (nl->connection == PLIP_CN_NONE) {
|
|
nl->connection = PLIP_CN_SEND;
|
|
nl->timeout_count = 0;
|
|
}
|
|
schedule_work(&nl->immediate);
|
|
spin_unlock_irq(&nl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
plip_rewrite_address(const struct net_device *dev, struct ethhdr *eth)
|
|
{
|
|
const struct in_device *in_dev = dev->ip_ptr;
|
|
|
|
if (in_dev) {
|
|
/* Any address will do - we take the first */
|
|
const struct in_ifaddr *ifa = in_dev->ifa_list;
|
|
if (ifa) {
|
|
memcpy(eth->h_source, dev->dev_addr, 6);
|
|
memset(eth->h_dest, 0xfc, 2);
|
|
memcpy(eth->h_dest+2, &ifa->ifa_address, 4);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
plip_hard_header(struct sk_buff *skb, struct net_device *dev,
|
|
unsigned short type, const void *daddr,
|
|
const void *saddr, unsigned len)
|
|
{
|
|
int ret;
|
|
|
|
ret = eth_header(skb, dev, type, daddr, saddr, len);
|
|
if (ret >= 0)
|
|
plip_rewrite_address (dev, (struct ethhdr *)skb->data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int plip_hard_header_cache(const struct neighbour *neigh,
|
|
struct hh_cache *hh)
|
|
{
|
|
int ret;
|
|
|
|
ret = eth_header_cache(neigh, hh);
|
|
if (ret == 0) {
|
|
struct ethhdr *eth;
|
|
|
|
eth = (struct ethhdr*)(((u8*)hh->hh_data) +
|
|
HH_DATA_OFF(sizeof(*eth)));
|
|
plip_rewrite_address (neigh->dev, eth);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Open/initialize the board. This is called (in the current kernel)
|
|
sometime after booting when the 'ifconfig' program is run.
|
|
|
|
This routine gets exclusive access to the parallel port by allocating
|
|
its IRQ line.
|
|
*/
|
|
static int
|
|
plip_open(struct net_device *dev)
|
|
{
|
|
struct net_local *nl = netdev_priv(dev);
|
|
struct in_device *in_dev;
|
|
|
|
/* Grab the port */
|
|
if (!nl->port_owner) {
|
|
if (parport_claim(nl->pardev)) return -EAGAIN;
|
|
nl->port_owner = 1;
|
|
}
|
|
|
|
nl->should_relinquish = 0;
|
|
|
|
/* Clear the data port. */
|
|
write_data (dev, 0x00);
|
|
|
|
/* Enable rx interrupt. */
|
|
enable_parport_interrupts (dev);
|
|
if (dev->irq == -1)
|
|
{
|
|
atomic_set (&nl->kill_timer, 0);
|
|
schedule_delayed_work(&nl->timer, 1);
|
|
}
|
|
|
|
/* Initialize the state machine. */
|
|
nl->rcv_data.state = nl->snd_data.state = PLIP_PK_DONE;
|
|
nl->rcv_data.skb = nl->snd_data.skb = NULL;
|
|
nl->connection = PLIP_CN_NONE;
|
|
nl->is_deferred = 0;
|
|
|
|
/* Fill in the MAC-level header.
|
|
We used to abuse dev->broadcast to store the point-to-point
|
|
MAC address, but we no longer do it. Instead, we fetch the
|
|
interface address whenever it is needed, which is cheap enough
|
|
because we use the hh_cache. Actually, abusing dev->broadcast
|
|
didn't work, because when using plip_open the point-to-point
|
|
address isn't yet known.
|
|
PLIP doesn't have a real MAC address, but we need it to be
|
|
DOS compatible, and to properly support taps (otherwise,
|
|
when the device address isn't identical to the address of a
|
|
received frame, the kernel incorrectly drops it). */
|
|
|
|
if ((in_dev=dev->ip_ptr) != NULL) {
|
|
/* Any address will do - we take the first. We already
|
|
have the first two bytes filled with 0xfc, from
|
|
plip_init_dev(). */
|
|
struct in_ifaddr *ifa=in_dev->ifa_list;
|
|
if (ifa != NULL) {
|
|
memcpy(dev->dev_addr+2, &ifa->ifa_local, 4);
|
|
}
|
|
}
|
|
|
|
netif_start_queue (dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* The inverse routine to plip_open (). */
|
|
static int
|
|
plip_close(struct net_device *dev)
|
|
{
|
|
struct net_local *nl = netdev_priv(dev);
|
|
struct plip_local *snd = &nl->snd_data;
|
|
struct plip_local *rcv = &nl->rcv_data;
|
|
|
|
netif_stop_queue (dev);
|
|
DISABLE(dev->irq);
|
|
synchronize_irq(dev->irq);
|
|
|
|
if (dev->irq == -1)
|
|
{
|
|
init_completion(&nl->killed_timer_cmp);
|
|
atomic_set (&nl->kill_timer, 1);
|
|
wait_for_completion(&nl->killed_timer_cmp);
|
|
}
|
|
|
|
#ifdef NOTDEF
|
|
outb(0x00, PAR_DATA(dev));
|
|
#endif
|
|
nl->is_deferred = 0;
|
|
nl->connection = PLIP_CN_NONE;
|
|
if (nl->port_owner) {
|
|
parport_release(nl->pardev);
|
|
nl->port_owner = 0;
|
|
}
|
|
|
|
snd->state = PLIP_PK_DONE;
|
|
if (snd->skb) {
|
|
dev_kfree_skb(snd->skb);
|
|
snd->skb = NULL;
|
|
}
|
|
rcv->state = PLIP_PK_DONE;
|
|
if (rcv->skb) {
|
|
kfree_skb(rcv->skb);
|
|
rcv->skb = NULL;
|
|
}
|
|
|
|
#ifdef NOTDEF
|
|
/* Reset. */
|
|
outb(0x00, PAR_CONTROL(dev));
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
plip_preempt(void *handle)
|
|
{
|
|
struct net_device *dev = (struct net_device *)handle;
|
|
struct net_local *nl = netdev_priv(dev);
|
|
|
|
/* Stand our ground if a datagram is on the wire */
|
|
if (nl->connection != PLIP_CN_NONE) {
|
|
nl->should_relinquish = 1;
|
|
return 1;
|
|
}
|
|
|
|
nl->port_owner = 0; /* Remember that we released the bus */
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
plip_wakeup(void *handle)
|
|
{
|
|
struct net_device *dev = (struct net_device *)handle;
|
|
struct net_local *nl = netdev_priv(dev);
|
|
|
|
if (nl->port_owner) {
|
|
/* Why are we being woken up? */
|
|
printk(KERN_DEBUG "%s: why am I being woken up?\n", dev->name);
|
|
if (!parport_claim(nl->pardev))
|
|
/* bus_owner is already set (but why?) */
|
|
printk(KERN_DEBUG "%s: I'm broken.\n", dev->name);
|
|
else
|
|
return;
|
|
}
|
|
|
|
if (!(dev->flags & IFF_UP))
|
|
/* Don't need the port when the interface is down */
|
|
return;
|
|
|
|
if (!parport_claim(nl->pardev)) {
|
|
nl->port_owner = 1;
|
|
/* Clear the data port. */
|
|
write_data (dev, 0x00);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
plip_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct net_local *nl = netdev_priv(dev);
|
|
struct plipconf *pc = (struct plipconf *) &rq->ifr_ifru;
|
|
|
|
if (cmd != SIOCDEVPLIP)
|
|
return -EOPNOTSUPP;
|
|
|
|
switch(pc->pcmd) {
|
|
case PLIP_GET_TIMEOUT:
|
|
pc->trigger = nl->trigger;
|
|
pc->nibble = nl->nibble;
|
|
break;
|
|
case PLIP_SET_TIMEOUT:
|
|
if(!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
nl->trigger = pc->trigger;
|
|
nl->nibble = pc->nibble;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int parport[PLIP_MAX] = { [0 ... PLIP_MAX-1] = -1 };
|
|
static int timid;
|
|
|
|
module_param_array(parport, int, NULL, 0);
|
|
module_param(timid, int, 0);
|
|
MODULE_PARM_DESC(parport, "List of parport device numbers to use by plip");
|
|
|
|
static struct net_device *dev_plip[PLIP_MAX] = { NULL, };
|
|
|
|
static inline int
|
|
plip_searchfor(int list[], int a)
|
|
{
|
|
int i;
|
|
for (i = 0; i < PLIP_MAX && list[i] != -1; i++) {
|
|
if (list[i] == a) return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* plip_attach() is called (by the parport code) when a port is
|
|
* available to use. */
|
|
static void plip_attach (struct parport *port)
|
|
{
|
|
static int unit;
|
|
struct net_device *dev;
|
|
struct net_local *nl;
|
|
char name[IFNAMSIZ];
|
|
|
|
if ((parport[0] == -1 && (!timid || !port->devices)) ||
|
|
plip_searchfor(parport, port->number)) {
|
|
if (unit == PLIP_MAX) {
|
|
printk(KERN_ERR "plip: too many devices\n");
|
|
return;
|
|
}
|
|
|
|
sprintf(name, "plip%d", unit);
|
|
dev = alloc_etherdev(sizeof(struct net_local));
|
|
if (!dev) {
|
|
printk(KERN_ERR "plip: memory squeeze\n");
|
|
return;
|
|
}
|
|
|
|
strcpy(dev->name, name);
|
|
|
|
dev->irq = port->irq;
|
|
dev->base_addr = port->base;
|
|
if (port->irq == -1) {
|
|
printk(KERN_INFO "plip: %s has no IRQ. Using IRQ-less mode,"
|
|
"which is fairly inefficient!\n", port->name);
|
|
}
|
|
|
|
nl = netdev_priv(dev);
|
|
nl->dev = dev;
|
|
nl->pardev = parport_register_device(port, dev->name, plip_preempt,
|
|
plip_wakeup, plip_interrupt,
|
|
0, dev);
|
|
|
|
if (!nl->pardev) {
|
|
printk(KERN_ERR "%s: parport_register failed\n", name);
|
|
goto err_free_dev;
|
|
return;
|
|
}
|
|
|
|
plip_init_netdev(dev);
|
|
|
|
if (register_netdev(dev)) {
|
|
printk(KERN_ERR "%s: network register failed\n", name);
|
|
goto err_parport_unregister;
|
|
}
|
|
|
|
printk(KERN_INFO "%s", version);
|
|
if (dev->irq != -1)
|
|
printk(KERN_INFO "%s: Parallel port at %#3lx, "
|
|
"using IRQ %d.\n",
|
|
dev->name, dev->base_addr, dev->irq);
|
|
else
|
|
printk(KERN_INFO "%s: Parallel port at %#3lx, "
|
|
"not using IRQ.\n",
|
|
dev->name, dev->base_addr);
|
|
dev_plip[unit++] = dev;
|
|
}
|
|
return;
|
|
|
|
err_parport_unregister:
|
|
parport_unregister_device(nl->pardev);
|
|
err_free_dev:
|
|
free_netdev(dev);
|
|
return;
|
|
}
|
|
|
|
/* plip_detach() is called (by the parport code) when a port is
|
|
* no longer available to use. */
|
|
static void plip_detach (struct parport *port)
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
|
|
static struct parport_driver plip_driver = {
|
|
.name = "plip",
|
|
.attach = plip_attach,
|
|
.detach = plip_detach
|
|
};
|
|
|
|
static void __exit plip_cleanup_module (void)
|
|
{
|
|
struct net_device *dev;
|
|
int i;
|
|
|
|
parport_unregister_driver (&plip_driver);
|
|
|
|
for (i=0; i < PLIP_MAX; i++) {
|
|
if ((dev = dev_plip[i])) {
|
|
struct net_local *nl = netdev_priv(dev);
|
|
unregister_netdev(dev);
|
|
if (nl->port_owner)
|
|
parport_release(nl->pardev);
|
|
parport_unregister_device(nl->pardev);
|
|
free_netdev(dev);
|
|
dev_plip[i] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifndef MODULE
|
|
|
|
static int parport_ptr;
|
|
|
|
static int __init plip_setup(char *str)
|
|
{
|
|
int ints[4];
|
|
|
|
str = get_options(str, ARRAY_SIZE(ints), ints);
|
|
|
|
/* Ugh. */
|
|
if (!strncmp(str, "parport", 7)) {
|
|
int n = simple_strtoul(str+7, NULL, 10);
|
|
if (parport_ptr < PLIP_MAX)
|
|
parport[parport_ptr++] = n;
|
|
else
|
|
printk(KERN_INFO "plip: too many ports, %s ignored.\n",
|
|
str);
|
|
} else if (!strcmp(str, "timid")) {
|
|
timid = 1;
|
|
} else {
|
|
if (ints[0] == 0 || ints[1] == 0) {
|
|
/* disable driver on "plip=" or "plip=0" */
|
|
parport[0] = -2;
|
|
} else {
|
|
printk(KERN_WARNING "warning: 'plip=0x%x' ignored\n",
|
|
ints[1]);
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
__setup("plip=", plip_setup);
|
|
|
|
#endif /* !MODULE */
|
|
|
|
static int __init plip_init (void)
|
|
{
|
|
if (parport[0] == -2)
|
|
return 0;
|
|
|
|
if (parport[0] != -1 && timid) {
|
|
printk(KERN_WARNING "plip: warning, ignoring `timid' since specific ports given.\n");
|
|
timid = 0;
|
|
}
|
|
|
|
if (parport_register_driver (&plip_driver)) {
|
|
printk (KERN_WARNING "plip: couldn't register driver\n");
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
module_init(plip_init);
|
|
module_exit(plip_cleanup_module);
|
|
MODULE_LICENSE("GPL");
|