linux_dsm_epyc7002/drivers/pinctrl/pinconf-generic.c
Heiko Stübner 7970cb770d pinctrl: add pinconf-generic define for a pin-default pull
There exist controllers that don't support to set the pull to up or down
separately but instead automatically set the pull direction based on
embedded knowledge inside the controller, for example depending on the
selected mux function of the pin.

Therefore this patch adds another config option to use this default
pull-state for a pin where it is not possible to know or decide if the
pin will be pulled up or down.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:51 +02:00

142 lines
4.3 KiB
C

/*
* Core driver for the generic pin config portions of the pin control subsystem
*
* Copyright (C) 2011 ST-Ericsson SA
* Written on behalf of Linaro for ST-Ericsson
*
* Author: Linus Walleij <linus.walleij@linaro.org>
*
* License terms: GNU General Public License (GPL) version 2
*/
#define pr_fmt(fmt) "generic pinconfig core: " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include "core.h"
#include "pinconf.h"
#ifdef CONFIG_DEBUG_FS
struct pin_config_item {
const enum pin_config_param param;
const char * const display;
const char * const format;
};
#define PCONFDUMP(a, b, c) { .param = a, .display = b, .format = c }
static struct pin_config_item conf_items[] = {
PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL),
PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL),
PCONFDUMP(PIN_CONFIG_BIAS_BUS_HOLD, "input bias bus hold", NULL),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", NULL),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
"input bias pull to pin specific state", NULL),
PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL),
PCONFDUMP(PIN_CONFIG_DRIVE_STRENGTH, "output drive strength", "mA"),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL),
PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "time units"),
PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector"),
PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL),
PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode"),
PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level"),
};
void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned pin)
{
const struct pinconf_ops *ops = pctldev->desc->confops;
int i;
if (!ops->is_generic)
return;
for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
unsigned long config;
int ret;
/* We want to check out this parameter */
config = pinconf_to_config_packed(conf_items[i].param, 0);
ret = pin_config_get_for_pin(pctldev, pin, &config);
/* These are legal errors */
if (ret == -EINVAL || ret == -ENOTSUPP)
continue;
if (ret) {
seq_printf(s, "ERROR READING CONFIG SETTING %d ", i);
continue;
}
/* Space between multiple configs */
seq_puts(s, " ");
seq_puts(s, conf_items[i].display);
/* Print unit if available */
if (conf_items[i].format &&
pinconf_to_config_argument(config) != 0)
seq_printf(s, " (%u %s)",
pinconf_to_config_argument(config),
conf_items[i].format);
}
}
void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
struct seq_file *s, const char *gname)
{
const struct pinconf_ops *ops = pctldev->desc->confops;
int i;
if (!ops->is_generic)
return;
for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
unsigned long config;
int ret;
/* We want to check out this parameter */
config = pinconf_to_config_packed(conf_items[i].param, 0);
ret = pin_config_group_get(dev_name(pctldev->dev), gname,
&config);
/* These are legal errors */
if (ret == -EINVAL || ret == -ENOTSUPP)
continue;
if (ret) {
seq_printf(s, "ERROR READING CONFIG SETTING %d ", i);
continue;
}
/* Space between multiple configs */
seq_puts(s, " ");
seq_puts(s, conf_items[i].display);
/* Print unit if available */
if (conf_items[i].format && config != 0)
seq_printf(s, " (%u %s)",
pinconf_to_config_argument(config),
conf_items[i].format);
}
}
void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned long config)
{
int i;
for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
if (pinconf_to_config_param(config) != conf_items[i].param)
continue;
seq_printf(s, "%s: 0x%x", conf_items[i].display,
pinconf_to_config_argument(config));
}
}
EXPORT_SYMBOL_GPL(pinconf_generic_dump_config);
#endif