mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 03:29:47 +07:00
5bbcc0f595
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
3313 lines
84 KiB
C
3313 lines
84 KiB
C
/****************************************************************************
|
|
* Driver for Solarflare network controllers and boards
|
|
* Copyright 2005-2006 Fen Systems Ltd.
|
|
* Copyright 2005-2013 Solarflare Communications Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation, incorporated herein by reference.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/in.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/topology.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/aer.h>
|
|
#include <linux/interrupt.h>
|
|
#include "net_driver.h"
|
|
#include "efx.h"
|
|
#include "nic.h"
|
|
#include "selftest.h"
|
|
|
|
#include "workarounds.h"
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Type name strings
|
|
*
|
|
**************************************************************************
|
|
*/
|
|
|
|
/* Loopback mode names (see LOOPBACK_MODE()) */
|
|
const unsigned int ef4_loopback_mode_max = LOOPBACK_MAX;
|
|
const char *const ef4_loopback_mode_names[] = {
|
|
[LOOPBACK_NONE] = "NONE",
|
|
[LOOPBACK_DATA] = "DATAPATH",
|
|
[LOOPBACK_GMAC] = "GMAC",
|
|
[LOOPBACK_XGMII] = "XGMII",
|
|
[LOOPBACK_XGXS] = "XGXS",
|
|
[LOOPBACK_XAUI] = "XAUI",
|
|
[LOOPBACK_GMII] = "GMII",
|
|
[LOOPBACK_SGMII] = "SGMII",
|
|
[LOOPBACK_XGBR] = "XGBR",
|
|
[LOOPBACK_XFI] = "XFI",
|
|
[LOOPBACK_XAUI_FAR] = "XAUI_FAR",
|
|
[LOOPBACK_GMII_FAR] = "GMII_FAR",
|
|
[LOOPBACK_SGMII_FAR] = "SGMII_FAR",
|
|
[LOOPBACK_XFI_FAR] = "XFI_FAR",
|
|
[LOOPBACK_GPHY] = "GPHY",
|
|
[LOOPBACK_PHYXS] = "PHYXS",
|
|
[LOOPBACK_PCS] = "PCS",
|
|
[LOOPBACK_PMAPMD] = "PMA/PMD",
|
|
[LOOPBACK_XPORT] = "XPORT",
|
|
[LOOPBACK_XGMII_WS] = "XGMII_WS",
|
|
[LOOPBACK_XAUI_WS] = "XAUI_WS",
|
|
[LOOPBACK_XAUI_WS_FAR] = "XAUI_WS_FAR",
|
|
[LOOPBACK_XAUI_WS_NEAR] = "XAUI_WS_NEAR",
|
|
[LOOPBACK_GMII_WS] = "GMII_WS",
|
|
[LOOPBACK_XFI_WS] = "XFI_WS",
|
|
[LOOPBACK_XFI_WS_FAR] = "XFI_WS_FAR",
|
|
[LOOPBACK_PHYXS_WS] = "PHYXS_WS",
|
|
};
|
|
|
|
const unsigned int ef4_reset_type_max = RESET_TYPE_MAX;
|
|
const char *const ef4_reset_type_names[] = {
|
|
[RESET_TYPE_INVISIBLE] = "INVISIBLE",
|
|
[RESET_TYPE_ALL] = "ALL",
|
|
[RESET_TYPE_RECOVER_OR_ALL] = "RECOVER_OR_ALL",
|
|
[RESET_TYPE_WORLD] = "WORLD",
|
|
[RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE",
|
|
[RESET_TYPE_DATAPATH] = "DATAPATH",
|
|
[RESET_TYPE_DISABLE] = "DISABLE",
|
|
[RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG",
|
|
[RESET_TYPE_INT_ERROR] = "INT_ERROR",
|
|
[RESET_TYPE_RX_RECOVERY] = "RX_RECOVERY",
|
|
[RESET_TYPE_DMA_ERROR] = "DMA_ERROR",
|
|
[RESET_TYPE_TX_SKIP] = "TX_SKIP",
|
|
};
|
|
|
|
/* Reset workqueue. If any NIC has a hardware failure then a reset will be
|
|
* queued onto this work queue. This is not a per-nic work queue, because
|
|
* ef4_reset_work() acquires the rtnl lock, so resets are naturally serialised.
|
|
*/
|
|
static struct workqueue_struct *reset_workqueue;
|
|
|
|
/* How often and how many times to poll for a reset while waiting for a
|
|
* BIST that another function started to complete.
|
|
*/
|
|
#define BIST_WAIT_DELAY_MS 100
|
|
#define BIST_WAIT_DELAY_COUNT 100
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Configurable values
|
|
*
|
|
*************************************************************************/
|
|
|
|
/*
|
|
* Use separate channels for TX and RX events
|
|
*
|
|
* Set this to 1 to use separate channels for TX and RX. It allows us
|
|
* to control interrupt affinity separately for TX and RX.
|
|
*
|
|
* This is only used in MSI-X interrupt mode
|
|
*/
|
|
bool ef4_separate_tx_channels;
|
|
module_param(ef4_separate_tx_channels, bool, 0444);
|
|
MODULE_PARM_DESC(ef4_separate_tx_channels,
|
|
"Use separate channels for TX and RX");
|
|
|
|
/* This is the weight assigned to each of the (per-channel) virtual
|
|
* NAPI devices.
|
|
*/
|
|
static int napi_weight = 64;
|
|
|
|
/* This is the time (in jiffies) between invocations of the hardware
|
|
* monitor.
|
|
* On Falcon-based NICs, this will:
|
|
* - Check the on-board hardware monitor;
|
|
* - Poll the link state and reconfigure the hardware as necessary.
|
|
* On Siena-based NICs for power systems with EEH support, this will give EEH a
|
|
* chance to start.
|
|
*/
|
|
static unsigned int ef4_monitor_interval = 1 * HZ;
|
|
|
|
/* Initial interrupt moderation settings. They can be modified after
|
|
* module load with ethtool.
|
|
*
|
|
* The default for RX should strike a balance between increasing the
|
|
* round-trip latency and reducing overhead.
|
|
*/
|
|
static unsigned int rx_irq_mod_usec = 60;
|
|
|
|
/* Initial interrupt moderation settings. They can be modified after
|
|
* module load with ethtool.
|
|
*
|
|
* This default is chosen to ensure that a 10G link does not go idle
|
|
* while a TX queue is stopped after it has become full. A queue is
|
|
* restarted when it drops below half full. The time this takes (assuming
|
|
* worst case 3 descriptors per packet and 1024 descriptors) is
|
|
* 512 / 3 * 1.2 = 205 usec.
|
|
*/
|
|
static unsigned int tx_irq_mod_usec = 150;
|
|
|
|
/* This is the first interrupt mode to try out of:
|
|
* 0 => MSI-X
|
|
* 1 => MSI
|
|
* 2 => legacy
|
|
*/
|
|
static unsigned int interrupt_mode;
|
|
|
|
/* This is the requested number of CPUs to use for Receive-Side Scaling (RSS),
|
|
* i.e. the number of CPUs among which we may distribute simultaneous
|
|
* interrupt handling.
|
|
*
|
|
* Cards without MSI-X will only target one CPU via legacy or MSI interrupt.
|
|
* The default (0) means to assign an interrupt to each core.
|
|
*/
|
|
static unsigned int rss_cpus;
|
|
module_param(rss_cpus, uint, 0444);
|
|
MODULE_PARM_DESC(rss_cpus, "Number of CPUs to use for Receive-Side Scaling");
|
|
|
|
static bool phy_flash_cfg;
|
|
module_param(phy_flash_cfg, bool, 0644);
|
|
MODULE_PARM_DESC(phy_flash_cfg, "Set PHYs into reflash mode initially");
|
|
|
|
static unsigned irq_adapt_low_thresh = 8000;
|
|
module_param(irq_adapt_low_thresh, uint, 0644);
|
|
MODULE_PARM_DESC(irq_adapt_low_thresh,
|
|
"Threshold score for reducing IRQ moderation");
|
|
|
|
static unsigned irq_adapt_high_thresh = 16000;
|
|
module_param(irq_adapt_high_thresh, uint, 0644);
|
|
MODULE_PARM_DESC(irq_adapt_high_thresh,
|
|
"Threshold score for increasing IRQ moderation");
|
|
|
|
static unsigned debug = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
|
|
NETIF_MSG_LINK | NETIF_MSG_IFDOWN |
|
|
NETIF_MSG_IFUP | NETIF_MSG_RX_ERR |
|
|
NETIF_MSG_TX_ERR | NETIF_MSG_HW);
|
|
module_param(debug, uint, 0);
|
|
MODULE_PARM_DESC(debug, "Bitmapped debugging message enable value");
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Utility functions and prototypes
|
|
*
|
|
*************************************************************************/
|
|
|
|
static int ef4_soft_enable_interrupts(struct ef4_nic *efx);
|
|
static void ef4_soft_disable_interrupts(struct ef4_nic *efx);
|
|
static void ef4_remove_channel(struct ef4_channel *channel);
|
|
static void ef4_remove_channels(struct ef4_nic *efx);
|
|
static const struct ef4_channel_type ef4_default_channel_type;
|
|
static void ef4_remove_port(struct ef4_nic *efx);
|
|
static void ef4_init_napi_channel(struct ef4_channel *channel);
|
|
static void ef4_fini_napi(struct ef4_nic *efx);
|
|
static void ef4_fini_napi_channel(struct ef4_channel *channel);
|
|
static void ef4_fini_struct(struct ef4_nic *efx);
|
|
static void ef4_start_all(struct ef4_nic *efx);
|
|
static void ef4_stop_all(struct ef4_nic *efx);
|
|
|
|
#define EF4_ASSERT_RESET_SERIALISED(efx) \
|
|
do { \
|
|
if ((efx->state == STATE_READY) || \
|
|
(efx->state == STATE_RECOVERY) || \
|
|
(efx->state == STATE_DISABLED)) \
|
|
ASSERT_RTNL(); \
|
|
} while (0)
|
|
|
|
static int ef4_check_disabled(struct ef4_nic *efx)
|
|
{
|
|
if (efx->state == STATE_DISABLED || efx->state == STATE_RECOVERY) {
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"device is disabled due to earlier errors\n");
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Event queue processing
|
|
*
|
|
*************************************************************************/
|
|
|
|
/* Process channel's event queue
|
|
*
|
|
* This function is responsible for processing the event queue of a
|
|
* single channel. The caller must guarantee that this function will
|
|
* never be concurrently called more than once on the same channel,
|
|
* though different channels may be being processed concurrently.
|
|
*/
|
|
static int ef4_process_channel(struct ef4_channel *channel, int budget)
|
|
{
|
|
struct ef4_tx_queue *tx_queue;
|
|
int spent;
|
|
|
|
if (unlikely(!channel->enabled))
|
|
return 0;
|
|
|
|
ef4_for_each_channel_tx_queue(tx_queue, channel) {
|
|
tx_queue->pkts_compl = 0;
|
|
tx_queue->bytes_compl = 0;
|
|
}
|
|
|
|
spent = ef4_nic_process_eventq(channel, budget);
|
|
if (spent && ef4_channel_has_rx_queue(channel)) {
|
|
struct ef4_rx_queue *rx_queue =
|
|
ef4_channel_get_rx_queue(channel);
|
|
|
|
ef4_rx_flush_packet(channel);
|
|
ef4_fast_push_rx_descriptors(rx_queue, true);
|
|
}
|
|
|
|
/* Update BQL */
|
|
ef4_for_each_channel_tx_queue(tx_queue, channel) {
|
|
if (tx_queue->bytes_compl) {
|
|
netdev_tx_completed_queue(tx_queue->core_txq,
|
|
tx_queue->pkts_compl, tx_queue->bytes_compl);
|
|
}
|
|
}
|
|
|
|
return spent;
|
|
}
|
|
|
|
/* NAPI poll handler
|
|
*
|
|
* NAPI guarantees serialisation of polls of the same device, which
|
|
* provides the guarantee required by ef4_process_channel().
|
|
*/
|
|
static void ef4_update_irq_mod(struct ef4_nic *efx, struct ef4_channel *channel)
|
|
{
|
|
int step = efx->irq_mod_step_us;
|
|
|
|
if (channel->irq_mod_score < irq_adapt_low_thresh) {
|
|
if (channel->irq_moderation_us > step) {
|
|
channel->irq_moderation_us -= step;
|
|
efx->type->push_irq_moderation(channel);
|
|
}
|
|
} else if (channel->irq_mod_score > irq_adapt_high_thresh) {
|
|
if (channel->irq_moderation_us <
|
|
efx->irq_rx_moderation_us) {
|
|
channel->irq_moderation_us += step;
|
|
efx->type->push_irq_moderation(channel);
|
|
}
|
|
}
|
|
|
|
channel->irq_count = 0;
|
|
channel->irq_mod_score = 0;
|
|
}
|
|
|
|
static int ef4_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct ef4_channel *channel =
|
|
container_of(napi, struct ef4_channel, napi_str);
|
|
struct ef4_nic *efx = channel->efx;
|
|
int spent;
|
|
|
|
netif_vdbg(efx, intr, efx->net_dev,
|
|
"channel %d NAPI poll executing on CPU %d\n",
|
|
channel->channel, raw_smp_processor_id());
|
|
|
|
spent = ef4_process_channel(channel, budget);
|
|
|
|
if (spent < budget) {
|
|
if (ef4_channel_has_rx_queue(channel) &&
|
|
efx->irq_rx_adaptive &&
|
|
unlikely(++channel->irq_count == 1000)) {
|
|
ef4_update_irq_mod(efx, channel);
|
|
}
|
|
|
|
ef4_filter_rfs_expire(channel);
|
|
|
|
/* There is no race here; although napi_disable() will
|
|
* only wait for napi_complete(), this isn't a problem
|
|
* since ef4_nic_eventq_read_ack() will have no effect if
|
|
* interrupts have already been disabled.
|
|
*/
|
|
napi_complete_done(napi, spent);
|
|
ef4_nic_eventq_read_ack(channel);
|
|
}
|
|
|
|
return spent;
|
|
}
|
|
|
|
/* Create event queue
|
|
* Event queue memory allocations are done only once. If the channel
|
|
* is reset, the memory buffer will be reused; this guards against
|
|
* errors during channel reset and also simplifies interrupt handling.
|
|
*/
|
|
static int ef4_probe_eventq(struct ef4_channel *channel)
|
|
{
|
|
struct ef4_nic *efx = channel->efx;
|
|
unsigned long entries;
|
|
|
|
netif_dbg(efx, probe, efx->net_dev,
|
|
"chan %d create event queue\n", channel->channel);
|
|
|
|
/* Build an event queue with room for one event per tx and rx buffer,
|
|
* plus some extra for link state events and MCDI completions. */
|
|
entries = roundup_pow_of_two(efx->rxq_entries + efx->txq_entries + 128);
|
|
EF4_BUG_ON_PARANOID(entries > EF4_MAX_EVQ_SIZE);
|
|
channel->eventq_mask = max(entries, EF4_MIN_EVQ_SIZE) - 1;
|
|
|
|
return ef4_nic_probe_eventq(channel);
|
|
}
|
|
|
|
/* Prepare channel's event queue */
|
|
static int ef4_init_eventq(struct ef4_channel *channel)
|
|
{
|
|
struct ef4_nic *efx = channel->efx;
|
|
int rc;
|
|
|
|
EF4_WARN_ON_PARANOID(channel->eventq_init);
|
|
|
|
netif_dbg(efx, drv, efx->net_dev,
|
|
"chan %d init event queue\n", channel->channel);
|
|
|
|
rc = ef4_nic_init_eventq(channel);
|
|
if (rc == 0) {
|
|
efx->type->push_irq_moderation(channel);
|
|
channel->eventq_read_ptr = 0;
|
|
channel->eventq_init = true;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/* Enable event queue processing and NAPI */
|
|
void ef4_start_eventq(struct ef4_channel *channel)
|
|
{
|
|
netif_dbg(channel->efx, ifup, channel->efx->net_dev,
|
|
"chan %d start event queue\n", channel->channel);
|
|
|
|
/* Make sure the NAPI handler sees the enabled flag set */
|
|
channel->enabled = true;
|
|
smp_wmb();
|
|
|
|
napi_enable(&channel->napi_str);
|
|
ef4_nic_eventq_read_ack(channel);
|
|
}
|
|
|
|
/* Disable event queue processing and NAPI */
|
|
void ef4_stop_eventq(struct ef4_channel *channel)
|
|
{
|
|
if (!channel->enabled)
|
|
return;
|
|
|
|
napi_disable(&channel->napi_str);
|
|
channel->enabled = false;
|
|
}
|
|
|
|
static void ef4_fini_eventq(struct ef4_channel *channel)
|
|
{
|
|
if (!channel->eventq_init)
|
|
return;
|
|
|
|
netif_dbg(channel->efx, drv, channel->efx->net_dev,
|
|
"chan %d fini event queue\n", channel->channel);
|
|
|
|
ef4_nic_fini_eventq(channel);
|
|
channel->eventq_init = false;
|
|
}
|
|
|
|
static void ef4_remove_eventq(struct ef4_channel *channel)
|
|
{
|
|
netif_dbg(channel->efx, drv, channel->efx->net_dev,
|
|
"chan %d remove event queue\n", channel->channel);
|
|
|
|
ef4_nic_remove_eventq(channel);
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Channel handling
|
|
*
|
|
*************************************************************************/
|
|
|
|
/* Allocate and initialise a channel structure. */
|
|
static struct ef4_channel *
|
|
ef4_alloc_channel(struct ef4_nic *efx, int i, struct ef4_channel *old_channel)
|
|
{
|
|
struct ef4_channel *channel;
|
|
struct ef4_rx_queue *rx_queue;
|
|
struct ef4_tx_queue *tx_queue;
|
|
int j;
|
|
|
|
channel = kzalloc(sizeof(*channel), GFP_KERNEL);
|
|
if (!channel)
|
|
return NULL;
|
|
|
|
channel->efx = efx;
|
|
channel->channel = i;
|
|
channel->type = &ef4_default_channel_type;
|
|
|
|
for (j = 0; j < EF4_TXQ_TYPES; j++) {
|
|
tx_queue = &channel->tx_queue[j];
|
|
tx_queue->efx = efx;
|
|
tx_queue->queue = i * EF4_TXQ_TYPES + j;
|
|
tx_queue->channel = channel;
|
|
}
|
|
|
|
rx_queue = &channel->rx_queue;
|
|
rx_queue->efx = efx;
|
|
timer_setup(&rx_queue->slow_fill, ef4_rx_slow_fill, 0);
|
|
|
|
return channel;
|
|
}
|
|
|
|
/* Allocate and initialise a channel structure, copying parameters
|
|
* (but not resources) from an old channel structure.
|
|
*/
|
|
static struct ef4_channel *
|
|
ef4_copy_channel(const struct ef4_channel *old_channel)
|
|
{
|
|
struct ef4_channel *channel;
|
|
struct ef4_rx_queue *rx_queue;
|
|
struct ef4_tx_queue *tx_queue;
|
|
int j;
|
|
|
|
channel = kmalloc(sizeof(*channel), GFP_KERNEL);
|
|
if (!channel)
|
|
return NULL;
|
|
|
|
*channel = *old_channel;
|
|
|
|
channel->napi_dev = NULL;
|
|
INIT_HLIST_NODE(&channel->napi_str.napi_hash_node);
|
|
channel->napi_str.napi_id = 0;
|
|
channel->napi_str.state = 0;
|
|
memset(&channel->eventq, 0, sizeof(channel->eventq));
|
|
|
|
for (j = 0; j < EF4_TXQ_TYPES; j++) {
|
|
tx_queue = &channel->tx_queue[j];
|
|
if (tx_queue->channel)
|
|
tx_queue->channel = channel;
|
|
tx_queue->buffer = NULL;
|
|
memset(&tx_queue->txd, 0, sizeof(tx_queue->txd));
|
|
}
|
|
|
|
rx_queue = &channel->rx_queue;
|
|
rx_queue->buffer = NULL;
|
|
memset(&rx_queue->rxd, 0, sizeof(rx_queue->rxd));
|
|
timer_setup(&rx_queue->slow_fill, ef4_rx_slow_fill, 0);
|
|
|
|
return channel;
|
|
}
|
|
|
|
static int ef4_probe_channel(struct ef4_channel *channel)
|
|
{
|
|
struct ef4_tx_queue *tx_queue;
|
|
struct ef4_rx_queue *rx_queue;
|
|
int rc;
|
|
|
|
netif_dbg(channel->efx, probe, channel->efx->net_dev,
|
|
"creating channel %d\n", channel->channel);
|
|
|
|
rc = channel->type->pre_probe(channel);
|
|
if (rc)
|
|
goto fail;
|
|
|
|
rc = ef4_probe_eventq(channel);
|
|
if (rc)
|
|
goto fail;
|
|
|
|
ef4_for_each_channel_tx_queue(tx_queue, channel) {
|
|
rc = ef4_probe_tx_queue(tx_queue);
|
|
if (rc)
|
|
goto fail;
|
|
}
|
|
|
|
ef4_for_each_channel_rx_queue(rx_queue, channel) {
|
|
rc = ef4_probe_rx_queue(rx_queue);
|
|
if (rc)
|
|
goto fail;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
ef4_remove_channel(channel);
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
ef4_get_channel_name(struct ef4_channel *channel, char *buf, size_t len)
|
|
{
|
|
struct ef4_nic *efx = channel->efx;
|
|
const char *type;
|
|
int number;
|
|
|
|
number = channel->channel;
|
|
if (efx->tx_channel_offset == 0) {
|
|
type = "";
|
|
} else if (channel->channel < efx->tx_channel_offset) {
|
|
type = "-rx";
|
|
} else {
|
|
type = "-tx";
|
|
number -= efx->tx_channel_offset;
|
|
}
|
|
snprintf(buf, len, "%s%s-%d", efx->name, type, number);
|
|
}
|
|
|
|
static void ef4_set_channel_names(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
|
|
ef4_for_each_channel(channel, efx)
|
|
channel->type->get_name(channel,
|
|
efx->msi_context[channel->channel].name,
|
|
sizeof(efx->msi_context[0].name));
|
|
}
|
|
|
|
static int ef4_probe_channels(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
int rc;
|
|
|
|
/* Restart special buffer allocation */
|
|
efx->next_buffer_table = 0;
|
|
|
|
/* Probe channels in reverse, so that any 'extra' channels
|
|
* use the start of the buffer table. This allows the traffic
|
|
* channels to be resized without moving them or wasting the
|
|
* entries before them.
|
|
*/
|
|
ef4_for_each_channel_rev(channel, efx) {
|
|
rc = ef4_probe_channel(channel);
|
|
if (rc) {
|
|
netif_err(efx, probe, efx->net_dev,
|
|
"failed to create channel %d\n",
|
|
channel->channel);
|
|
goto fail;
|
|
}
|
|
}
|
|
ef4_set_channel_names(efx);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
ef4_remove_channels(efx);
|
|
return rc;
|
|
}
|
|
|
|
/* Channels are shutdown and reinitialised whilst the NIC is running
|
|
* to propagate configuration changes (mtu, checksum offload), or
|
|
* to clear hardware error conditions
|
|
*/
|
|
static void ef4_start_datapath(struct ef4_nic *efx)
|
|
{
|
|
netdev_features_t old_features = efx->net_dev->features;
|
|
bool old_rx_scatter = efx->rx_scatter;
|
|
struct ef4_tx_queue *tx_queue;
|
|
struct ef4_rx_queue *rx_queue;
|
|
struct ef4_channel *channel;
|
|
size_t rx_buf_len;
|
|
|
|
/* Calculate the rx buffer allocation parameters required to
|
|
* support the current MTU, including padding for header
|
|
* alignment and overruns.
|
|
*/
|
|
efx->rx_dma_len = (efx->rx_prefix_size +
|
|
EF4_MAX_FRAME_LEN(efx->net_dev->mtu) +
|
|
efx->type->rx_buffer_padding);
|
|
rx_buf_len = (sizeof(struct ef4_rx_page_state) +
|
|
efx->rx_ip_align + efx->rx_dma_len);
|
|
if (rx_buf_len <= PAGE_SIZE) {
|
|
efx->rx_scatter = efx->type->always_rx_scatter;
|
|
efx->rx_buffer_order = 0;
|
|
} else if (efx->type->can_rx_scatter) {
|
|
BUILD_BUG_ON(EF4_RX_USR_BUF_SIZE % L1_CACHE_BYTES);
|
|
BUILD_BUG_ON(sizeof(struct ef4_rx_page_state) +
|
|
2 * ALIGN(NET_IP_ALIGN + EF4_RX_USR_BUF_SIZE,
|
|
EF4_RX_BUF_ALIGNMENT) >
|
|
PAGE_SIZE);
|
|
efx->rx_scatter = true;
|
|
efx->rx_dma_len = EF4_RX_USR_BUF_SIZE;
|
|
efx->rx_buffer_order = 0;
|
|
} else {
|
|
efx->rx_scatter = false;
|
|
efx->rx_buffer_order = get_order(rx_buf_len);
|
|
}
|
|
|
|
ef4_rx_config_page_split(efx);
|
|
if (efx->rx_buffer_order)
|
|
netif_dbg(efx, drv, efx->net_dev,
|
|
"RX buf len=%u; page order=%u batch=%u\n",
|
|
efx->rx_dma_len, efx->rx_buffer_order,
|
|
efx->rx_pages_per_batch);
|
|
else
|
|
netif_dbg(efx, drv, efx->net_dev,
|
|
"RX buf len=%u step=%u bpp=%u; page batch=%u\n",
|
|
efx->rx_dma_len, efx->rx_page_buf_step,
|
|
efx->rx_bufs_per_page, efx->rx_pages_per_batch);
|
|
|
|
/* Restore previously fixed features in hw_features and remove
|
|
* features which are fixed now
|
|
*/
|
|
efx->net_dev->hw_features |= efx->net_dev->features;
|
|
efx->net_dev->hw_features &= ~efx->fixed_features;
|
|
efx->net_dev->features |= efx->fixed_features;
|
|
if (efx->net_dev->features != old_features)
|
|
netdev_features_change(efx->net_dev);
|
|
|
|
/* RX filters may also have scatter-enabled flags */
|
|
if (efx->rx_scatter != old_rx_scatter)
|
|
efx->type->filter_update_rx_scatter(efx);
|
|
|
|
/* We must keep at least one descriptor in a TX ring empty.
|
|
* We could avoid this when the queue size does not exactly
|
|
* match the hardware ring size, but it's not that important.
|
|
* Therefore we stop the queue when one more skb might fill
|
|
* the ring completely. We wake it when half way back to
|
|
* empty.
|
|
*/
|
|
efx->txq_stop_thresh = efx->txq_entries - ef4_tx_max_skb_descs(efx);
|
|
efx->txq_wake_thresh = efx->txq_stop_thresh / 2;
|
|
|
|
/* Initialise the channels */
|
|
ef4_for_each_channel(channel, efx) {
|
|
ef4_for_each_channel_tx_queue(tx_queue, channel) {
|
|
ef4_init_tx_queue(tx_queue);
|
|
atomic_inc(&efx->active_queues);
|
|
}
|
|
|
|
ef4_for_each_channel_rx_queue(rx_queue, channel) {
|
|
ef4_init_rx_queue(rx_queue);
|
|
atomic_inc(&efx->active_queues);
|
|
ef4_stop_eventq(channel);
|
|
ef4_fast_push_rx_descriptors(rx_queue, false);
|
|
ef4_start_eventq(channel);
|
|
}
|
|
|
|
WARN_ON(channel->rx_pkt_n_frags);
|
|
}
|
|
|
|
if (netif_device_present(efx->net_dev))
|
|
netif_tx_wake_all_queues(efx->net_dev);
|
|
}
|
|
|
|
static void ef4_stop_datapath(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
struct ef4_tx_queue *tx_queue;
|
|
struct ef4_rx_queue *rx_queue;
|
|
int rc;
|
|
|
|
EF4_ASSERT_RESET_SERIALISED(efx);
|
|
BUG_ON(efx->port_enabled);
|
|
|
|
/* Stop RX refill */
|
|
ef4_for_each_channel(channel, efx) {
|
|
ef4_for_each_channel_rx_queue(rx_queue, channel)
|
|
rx_queue->refill_enabled = false;
|
|
}
|
|
|
|
ef4_for_each_channel(channel, efx) {
|
|
/* RX packet processing is pipelined, so wait for the
|
|
* NAPI handler to complete. At least event queue 0
|
|
* might be kept active by non-data events, so don't
|
|
* use napi_synchronize() but actually disable NAPI
|
|
* temporarily.
|
|
*/
|
|
if (ef4_channel_has_rx_queue(channel)) {
|
|
ef4_stop_eventq(channel);
|
|
ef4_start_eventq(channel);
|
|
}
|
|
}
|
|
|
|
rc = efx->type->fini_dmaq(efx);
|
|
if (rc && EF4_WORKAROUND_7803(efx)) {
|
|
/* Schedule a reset to recover from the flush failure. The
|
|
* descriptor caches reference memory we're about to free,
|
|
* but falcon_reconfigure_mac_wrapper() won't reconnect
|
|
* the MACs because of the pending reset.
|
|
*/
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"Resetting to recover from flush failure\n");
|
|
ef4_schedule_reset(efx, RESET_TYPE_ALL);
|
|
} else if (rc) {
|
|
netif_err(efx, drv, efx->net_dev, "failed to flush queues\n");
|
|
} else {
|
|
netif_dbg(efx, drv, efx->net_dev,
|
|
"successfully flushed all queues\n");
|
|
}
|
|
|
|
ef4_for_each_channel(channel, efx) {
|
|
ef4_for_each_channel_rx_queue(rx_queue, channel)
|
|
ef4_fini_rx_queue(rx_queue);
|
|
ef4_for_each_possible_channel_tx_queue(tx_queue, channel)
|
|
ef4_fini_tx_queue(tx_queue);
|
|
}
|
|
}
|
|
|
|
static void ef4_remove_channel(struct ef4_channel *channel)
|
|
{
|
|
struct ef4_tx_queue *tx_queue;
|
|
struct ef4_rx_queue *rx_queue;
|
|
|
|
netif_dbg(channel->efx, drv, channel->efx->net_dev,
|
|
"destroy chan %d\n", channel->channel);
|
|
|
|
ef4_for_each_channel_rx_queue(rx_queue, channel)
|
|
ef4_remove_rx_queue(rx_queue);
|
|
ef4_for_each_possible_channel_tx_queue(tx_queue, channel)
|
|
ef4_remove_tx_queue(tx_queue);
|
|
ef4_remove_eventq(channel);
|
|
channel->type->post_remove(channel);
|
|
}
|
|
|
|
static void ef4_remove_channels(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
|
|
ef4_for_each_channel(channel, efx)
|
|
ef4_remove_channel(channel);
|
|
}
|
|
|
|
int
|
|
ef4_realloc_channels(struct ef4_nic *efx, u32 rxq_entries, u32 txq_entries)
|
|
{
|
|
struct ef4_channel *other_channel[EF4_MAX_CHANNELS], *channel;
|
|
u32 old_rxq_entries, old_txq_entries;
|
|
unsigned i, next_buffer_table = 0;
|
|
int rc, rc2;
|
|
|
|
rc = ef4_check_disabled(efx);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Not all channels should be reallocated. We must avoid
|
|
* reallocating their buffer table entries.
|
|
*/
|
|
ef4_for_each_channel(channel, efx) {
|
|
struct ef4_rx_queue *rx_queue;
|
|
struct ef4_tx_queue *tx_queue;
|
|
|
|
if (channel->type->copy)
|
|
continue;
|
|
next_buffer_table = max(next_buffer_table,
|
|
channel->eventq.index +
|
|
channel->eventq.entries);
|
|
ef4_for_each_channel_rx_queue(rx_queue, channel)
|
|
next_buffer_table = max(next_buffer_table,
|
|
rx_queue->rxd.index +
|
|
rx_queue->rxd.entries);
|
|
ef4_for_each_channel_tx_queue(tx_queue, channel)
|
|
next_buffer_table = max(next_buffer_table,
|
|
tx_queue->txd.index +
|
|
tx_queue->txd.entries);
|
|
}
|
|
|
|
ef4_device_detach_sync(efx);
|
|
ef4_stop_all(efx);
|
|
ef4_soft_disable_interrupts(efx);
|
|
|
|
/* Clone channels (where possible) */
|
|
memset(other_channel, 0, sizeof(other_channel));
|
|
for (i = 0; i < efx->n_channels; i++) {
|
|
channel = efx->channel[i];
|
|
if (channel->type->copy)
|
|
channel = channel->type->copy(channel);
|
|
if (!channel) {
|
|
rc = -ENOMEM;
|
|
goto out;
|
|
}
|
|
other_channel[i] = channel;
|
|
}
|
|
|
|
/* Swap entry counts and channel pointers */
|
|
old_rxq_entries = efx->rxq_entries;
|
|
old_txq_entries = efx->txq_entries;
|
|
efx->rxq_entries = rxq_entries;
|
|
efx->txq_entries = txq_entries;
|
|
for (i = 0; i < efx->n_channels; i++) {
|
|
channel = efx->channel[i];
|
|
efx->channel[i] = other_channel[i];
|
|
other_channel[i] = channel;
|
|
}
|
|
|
|
/* Restart buffer table allocation */
|
|
efx->next_buffer_table = next_buffer_table;
|
|
|
|
for (i = 0; i < efx->n_channels; i++) {
|
|
channel = efx->channel[i];
|
|
if (!channel->type->copy)
|
|
continue;
|
|
rc = ef4_probe_channel(channel);
|
|
if (rc)
|
|
goto rollback;
|
|
ef4_init_napi_channel(efx->channel[i]);
|
|
}
|
|
|
|
out:
|
|
/* Destroy unused channel structures */
|
|
for (i = 0; i < efx->n_channels; i++) {
|
|
channel = other_channel[i];
|
|
if (channel && channel->type->copy) {
|
|
ef4_fini_napi_channel(channel);
|
|
ef4_remove_channel(channel);
|
|
kfree(channel);
|
|
}
|
|
}
|
|
|
|
rc2 = ef4_soft_enable_interrupts(efx);
|
|
if (rc2) {
|
|
rc = rc ? rc : rc2;
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"unable to restart interrupts on channel reallocation\n");
|
|
ef4_schedule_reset(efx, RESET_TYPE_DISABLE);
|
|
} else {
|
|
ef4_start_all(efx);
|
|
netif_device_attach(efx->net_dev);
|
|
}
|
|
return rc;
|
|
|
|
rollback:
|
|
/* Swap back */
|
|
efx->rxq_entries = old_rxq_entries;
|
|
efx->txq_entries = old_txq_entries;
|
|
for (i = 0; i < efx->n_channels; i++) {
|
|
channel = efx->channel[i];
|
|
efx->channel[i] = other_channel[i];
|
|
other_channel[i] = channel;
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
void ef4_schedule_slow_fill(struct ef4_rx_queue *rx_queue)
|
|
{
|
|
mod_timer(&rx_queue->slow_fill, jiffies + msecs_to_jiffies(100));
|
|
}
|
|
|
|
static const struct ef4_channel_type ef4_default_channel_type = {
|
|
.pre_probe = ef4_channel_dummy_op_int,
|
|
.post_remove = ef4_channel_dummy_op_void,
|
|
.get_name = ef4_get_channel_name,
|
|
.copy = ef4_copy_channel,
|
|
.keep_eventq = false,
|
|
};
|
|
|
|
int ef4_channel_dummy_op_int(struct ef4_channel *channel)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
void ef4_channel_dummy_op_void(struct ef4_channel *channel)
|
|
{
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Port handling
|
|
*
|
|
**************************************************************************/
|
|
|
|
/* This ensures that the kernel is kept informed (via
|
|
* netif_carrier_on/off) of the link status, and also maintains the
|
|
* link status's stop on the port's TX queue.
|
|
*/
|
|
void ef4_link_status_changed(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_link_state *link_state = &efx->link_state;
|
|
|
|
/* SFC Bug 5356: A net_dev notifier is registered, so we must ensure
|
|
* that no events are triggered between unregister_netdev() and the
|
|
* driver unloading. A more general condition is that NETDEV_CHANGE
|
|
* can only be generated between NETDEV_UP and NETDEV_DOWN */
|
|
if (!netif_running(efx->net_dev))
|
|
return;
|
|
|
|
if (link_state->up != netif_carrier_ok(efx->net_dev)) {
|
|
efx->n_link_state_changes++;
|
|
|
|
if (link_state->up)
|
|
netif_carrier_on(efx->net_dev);
|
|
else
|
|
netif_carrier_off(efx->net_dev);
|
|
}
|
|
|
|
/* Status message for kernel log */
|
|
if (link_state->up)
|
|
netif_info(efx, link, efx->net_dev,
|
|
"link up at %uMbps %s-duplex (MTU %d)\n",
|
|
link_state->speed, link_state->fd ? "full" : "half",
|
|
efx->net_dev->mtu);
|
|
else
|
|
netif_info(efx, link, efx->net_dev, "link down\n");
|
|
}
|
|
|
|
void ef4_link_set_advertising(struct ef4_nic *efx, u32 advertising)
|
|
{
|
|
efx->link_advertising = advertising;
|
|
if (advertising) {
|
|
if (advertising & ADVERTISED_Pause)
|
|
efx->wanted_fc |= (EF4_FC_TX | EF4_FC_RX);
|
|
else
|
|
efx->wanted_fc &= ~(EF4_FC_TX | EF4_FC_RX);
|
|
if (advertising & ADVERTISED_Asym_Pause)
|
|
efx->wanted_fc ^= EF4_FC_TX;
|
|
}
|
|
}
|
|
|
|
void ef4_link_set_wanted_fc(struct ef4_nic *efx, u8 wanted_fc)
|
|
{
|
|
efx->wanted_fc = wanted_fc;
|
|
if (efx->link_advertising) {
|
|
if (wanted_fc & EF4_FC_RX)
|
|
efx->link_advertising |= (ADVERTISED_Pause |
|
|
ADVERTISED_Asym_Pause);
|
|
else
|
|
efx->link_advertising &= ~(ADVERTISED_Pause |
|
|
ADVERTISED_Asym_Pause);
|
|
if (wanted_fc & EF4_FC_TX)
|
|
efx->link_advertising ^= ADVERTISED_Asym_Pause;
|
|
}
|
|
}
|
|
|
|
static void ef4_fini_port(struct ef4_nic *efx);
|
|
|
|
/* We assume that efx->type->reconfigure_mac will always try to sync RX
|
|
* filters and therefore needs to read-lock the filter table against freeing
|
|
*/
|
|
void ef4_mac_reconfigure(struct ef4_nic *efx)
|
|
{
|
|
down_read(&efx->filter_sem);
|
|
efx->type->reconfigure_mac(efx);
|
|
up_read(&efx->filter_sem);
|
|
}
|
|
|
|
/* Push loopback/power/transmit disable settings to the PHY, and reconfigure
|
|
* the MAC appropriately. All other PHY configuration changes are pushed
|
|
* through phy_op->set_link_ksettings(), and pushed asynchronously to the MAC
|
|
* through ef4_monitor().
|
|
*
|
|
* Callers must hold the mac_lock
|
|
*/
|
|
int __ef4_reconfigure_port(struct ef4_nic *efx)
|
|
{
|
|
enum ef4_phy_mode phy_mode;
|
|
int rc;
|
|
|
|
WARN_ON(!mutex_is_locked(&efx->mac_lock));
|
|
|
|
/* Disable PHY transmit in mac level loopbacks */
|
|
phy_mode = efx->phy_mode;
|
|
if (LOOPBACK_INTERNAL(efx))
|
|
efx->phy_mode |= PHY_MODE_TX_DISABLED;
|
|
else
|
|
efx->phy_mode &= ~PHY_MODE_TX_DISABLED;
|
|
|
|
rc = efx->type->reconfigure_port(efx);
|
|
|
|
if (rc)
|
|
efx->phy_mode = phy_mode;
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* Reinitialise the MAC to pick up new PHY settings, even if the port is
|
|
* disabled. */
|
|
int ef4_reconfigure_port(struct ef4_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
EF4_ASSERT_RESET_SERIALISED(efx);
|
|
|
|
mutex_lock(&efx->mac_lock);
|
|
rc = __ef4_reconfigure_port(efx);
|
|
mutex_unlock(&efx->mac_lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* Asynchronous work item for changing MAC promiscuity and multicast
|
|
* hash. Avoid a drain/rx_ingress enable by reconfiguring the current
|
|
* MAC directly. */
|
|
static void ef4_mac_work(struct work_struct *data)
|
|
{
|
|
struct ef4_nic *efx = container_of(data, struct ef4_nic, mac_work);
|
|
|
|
mutex_lock(&efx->mac_lock);
|
|
if (efx->port_enabled)
|
|
ef4_mac_reconfigure(efx);
|
|
mutex_unlock(&efx->mac_lock);
|
|
}
|
|
|
|
static int ef4_probe_port(struct ef4_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
netif_dbg(efx, probe, efx->net_dev, "create port\n");
|
|
|
|
if (phy_flash_cfg)
|
|
efx->phy_mode = PHY_MODE_SPECIAL;
|
|
|
|
/* Connect up MAC/PHY operations table */
|
|
rc = efx->type->probe_port(efx);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Initialise MAC address to permanent address */
|
|
ether_addr_copy(efx->net_dev->dev_addr, efx->net_dev->perm_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ef4_init_port(struct ef4_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
netif_dbg(efx, drv, efx->net_dev, "init port\n");
|
|
|
|
mutex_lock(&efx->mac_lock);
|
|
|
|
rc = efx->phy_op->init(efx);
|
|
if (rc)
|
|
goto fail1;
|
|
|
|
efx->port_initialized = true;
|
|
|
|
/* Reconfigure the MAC before creating dma queues (required for
|
|
* Falcon/A1 where RX_INGR_EN/TX_DRAIN_EN isn't supported) */
|
|
ef4_mac_reconfigure(efx);
|
|
|
|
/* Ensure the PHY advertises the correct flow control settings */
|
|
rc = efx->phy_op->reconfigure(efx);
|
|
if (rc && rc != -EPERM)
|
|
goto fail2;
|
|
|
|
mutex_unlock(&efx->mac_lock);
|
|
return 0;
|
|
|
|
fail2:
|
|
efx->phy_op->fini(efx);
|
|
fail1:
|
|
mutex_unlock(&efx->mac_lock);
|
|
return rc;
|
|
}
|
|
|
|
static void ef4_start_port(struct ef4_nic *efx)
|
|
{
|
|
netif_dbg(efx, ifup, efx->net_dev, "start port\n");
|
|
BUG_ON(efx->port_enabled);
|
|
|
|
mutex_lock(&efx->mac_lock);
|
|
efx->port_enabled = true;
|
|
|
|
/* Ensure MAC ingress/egress is enabled */
|
|
ef4_mac_reconfigure(efx);
|
|
|
|
mutex_unlock(&efx->mac_lock);
|
|
}
|
|
|
|
/* Cancel work for MAC reconfiguration, periodic hardware monitoring
|
|
* and the async self-test, wait for them to finish and prevent them
|
|
* being scheduled again. This doesn't cover online resets, which
|
|
* should only be cancelled when removing the device.
|
|
*/
|
|
static void ef4_stop_port(struct ef4_nic *efx)
|
|
{
|
|
netif_dbg(efx, ifdown, efx->net_dev, "stop port\n");
|
|
|
|
EF4_ASSERT_RESET_SERIALISED(efx);
|
|
|
|
mutex_lock(&efx->mac_lock);
|
|
efx->port_enabled = false;
|
|
mutex_unlock(&efx->mac_lock);
|
|
|
|
/* Serialise against ef4_set_multicast_list() */
|
|
netif_addr_lock_bh(efx->net_dev);
|
|
netif_addr_unlock_bh(efx->net_dev);
|
|
|
|
cancel_delayed_work_sync(&efx->monitor_work);
|
|
ef4_selftest_async_cancel(efx);
|
|
cancel_work_sync(&efx->mac_work);
|
|
}
|
|
|
|
static void ef4_fini_port(struct ef4_nic *efx)
|
|
{
|
|
netif_dbg(efx, drv, efx->net_dev, "shut down port\n");
|
|
|
|
if (!efx->port_initialized)
|
|
return;
|
|
|
|
efx->phy_op->fini(efx);
|
|
efx->port_initialized = false;
|
|
|
|
efx->link_state.up = false;
|
|
ef4_link_status_changed(efx);
|
|
}
|
|
|
|
static void ef4_remove_port(struct ef4_nic *efx)
|
|
{
|
|
netif_dbg(efx, drv, efx->net_dev, "destroying port\n");
|
|
|
|
efx->type->remove_port(efx);
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* NIC handling
|
|
*
|
|
**************************************************************************/
|
|
|
|
static LIST_HEAD(ef4_primary_list);
|
|
static LIST_HEAD(ef4_unassociated_list);
|
|
|
|
static bool ef4_same_controller(struct ef4_nic *left, struct ef4_nic *right)
|
|
{
|
|
return left->type == right->type &&
|
|
left->vpd_sn && right->vpd_sn &&
|
|
!strcmp(left->vpd_sn, right->vpd_sn);
|
|
}
|
|
|
|
static void ef4_associate(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_nic *other, *next;
|
|
|
|
if (efx->primary == efx) {
|
|
/* Adding primary function; look for secondaries */
|
|
|
|
netif_dbg(efx, probe, efx->net_dev, "adding to primary list\n");
|
|
list_add_tail(&efx->node, &ef4_primary_list);
|
|
|
|
list_for_each_entry_safe(other, next, &ef4_unassociated_list,
|
|
node) {
|
|
if (ef4_same_controller(efx, other)) {
|
|
list_del(&other->node);
|
|
netif_dbg(other, probe, other->net_dev,
|
|
"moving to secondary list of %s %s\n",
|
|
pci_name(efx->pci_dev),
|
|
efx->net_dev->name);
|
|
list_add_tail(&other->node,
|
|
&efx->secondary_list);
|
|
other->primary = efx;
|
|
}
|
|
}
|
|
} else {
|
|
/* Adding secondary function; look for primary */
|
|
|
|
list_for_each_entry(other, &ef4_primary_list, node) {
|
|
if (ef4_same_controller(efx, other)) {
|
|
netif_dbg(efx, probe, efx->net_dev,
|
|
"adding to secondary list of %s %s\n",
|
|
pci_name(other->pci_dev),
|
|
other->net_dev->name);
|
|
list_add_tail(&efx->node,
|
|
&other->secondary_list);
|
|
efx->primary = other;
|
|
return;
|
|
}
|
|
}
|
|
|
|
netif_dbg(efx, probe, efx->net_dev,
|
|
"adding to unassociated list\n");
|
|
list_add_tail(&efx->node, &ef4_unassociated_list);
|
|
}
|
|
}
|
|
|
|
static void ef4_dissociate(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_nic *other, *next;
|
|
|
|
list_del(&efx->node);
|
|
efx->primary = NULL;
|
|
|
|
list_for_each_entry_safe(other, next, &efx->secondary_list, node) {
|
|
list_del(&other->node);
|
|
netif_dbg(other, probe, other->net_dev,
|
|
"moving to unassociated list\n");
|
|
list_add_tail(&other->node, &ef4_unassociated_list);
|
|
other->primary = NULL;
|
|
}
|
|
}
|
|
|
|
/* This configures the PCI device to enable I/O and DMA. */
|
|
static int ef4_init_io(struct ef4_nic *efx)
|
|
{
|
|
struct pci_dev *pci_dev = efx->pci_dev;
|
|
dma_addr_t dma_mask = efx->type->max_dma_mask;
|
|
unsigned int mem_map_size = efx->type->mem_map_size(efx);
|
|
int rc, bar;
|
|
|
|
netif_dbg(efx, probe, efx->net_dev, "initialising I/O\n");
|
|
|
|
bar = efx->type->mem_bar;
|
|
|
|
rc = pci_enable_device(pci_dev);
|
|
if (rc) {
|
|
netif_err(efx, probe, efx->net_dev,
|
|
"failed to enable PCI device\n");
|
|
goto fail1;
|
|
}
|
|
|
|
pci_set_master(pci_dev);
|
|
|
|
/* Set the PCI DMA mask. Try all possibilities from our
|
|
* genuine mask down to 32 bits, because some architectures
|
|
* (e.g. x86_64 with iommu_sac_force set) will allow 40 bit
|
|
* masks event though they reject 46 bit masks.
|
|
*/
|
|
while (dma_mask > 0x7fffffffUL) {
|
|
rc = dma_set_mask_and_coherent(&pci_dev->dev, dma_mask);
|
|
if (rc == 0)
|
|
break;
|
|
dma_mask >>= 1;
|
|
}
|
|
if (rc) {
|
|
netif_err(efx, probe, efx->net_dev,
|
|
"could not find a suitable DMA mask\n");
|
|
goto fail2;
|
|
}
|
|
netif_dbg(efx, probe, efx->net_dev,
|
|
"using DMA mask %llx\n", (unsigned long long) dma_mask);
|
|
|
|
efx->membase_phys = pci_resource_start(efx->pci_dev, bar);
|
|
rc = pci_request_region(pci_dev, bar, "sfc");
|
|
if (rc) {
|
|
netif_err(efx, probe, efx->net_dev,
|
|
"request for memory BAR failed\n");
|
|
rc = -EIO;
|
|
goto fail3;
|
|
}
|
|
efx->membase = ioremap_nocache(efx->membase_phys, mem_map_size);
|
|
if (!efx->membase) {
|
|
netif_err(efx, probe, efx->net_dev,
|
|
"could not map memory BAR at %llx+%x\n",
|
|
(unsigned long long)efx->membase_phys, mem_map_size);
|
|
rc = -ENOMEM;
|
|
goto fail4;
|
|
}
|
|
netif_dbg(efx, probe, efx->net_dev,
|
|
"memory BAR at %llx+%x (virtual %p)\n",
|
|
(unsigned long long)efx->membase_phys, mem_map_size,
|
|
efx->membase);
|
|
|
|
return 0;
|
|
|
|
fail4:
|
|
pci_release_region(efx->pci_dev, bar);
|
|
fail3:
|
|
efx->membase_phys = 0;
|
|
fail2:
|
|
pci_disable_device(efx->pci_dev);
|
|
fail1:
|
|
return rc;
|
|
}
|
|
|
|
static void ef4_fini_io(struct ef4_nic *efx)
|
|
{
|
|
int bar;
|
|
|
|
netif_dbg(efx, drv, efx->net_dev, "shutting down I/O\n");
|
|
|
|
if (efx->membase) {
|
|
iounmap(efx->membase);
|
|
efx->membase = NULL;
|
|
}
|
|
|
|
if (efx->membase_phys) {
|
|
bar = efx->type->mem_bar;
|
|
pci_release_region(efx->pci_dev, bar);
|
|
efx->membase_phys = 0;
|
|
}
|
|
|
|
/* Don't disable bus-mastering if VFs are assigned */
|
|
if (!pci_vfs_assigned(efx->pci_dev))
|
|
pci_disable_device(efx->pci_dev);
|
|
}
|
|
|
|
void ef4_set_default_rx_indir_table(struct ef4_nic *efx)
|
|
{
|
|
size_t i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(efx->rx_indir_table); i++)
|
|
efx->rx_indir_table[i] =
|
|
ethtool_rxfh_indir_default(i, efx->rss_spread);
|
|
}
|
|
|
|
static unsigned int ef4_wanted_parallelism(struct ef4_nic *efx)
|
|
{
|
|
cpumask_var_t thread_mask;
|
|
unsigned int count;
|
|
int cpu;
|
|
|
|
if (rss_cpus) {
|
|
count = rss_cpus;
|
|
} else {
|
|
if (unlikely(!zalloc_cpumask_var(&thread_mask, GFP_KERNEL))) {
|
|
netif_warn(efx, probe, efx->net_dev,
|
|
"RSS disabled due to allocation failure\n");
|
|
return 1;
|
|
}
|
|
|
|
count = 0;
|
|
for_each_online_cpu(cpu) {
|
|
if (!cpumask_test_cpu(cpu, thread_mask)) {
|
|
++count;
|
|
cpumask_or(thread_mask, thread_mask,
|
|
topology_sibling_cpumask(cpu));
|
|
}
|
|
}
|
|
|
|
free_cpumask_var(thread_mask);
|
|
}
|
|
|
|
if (count > EF4_MAX_RX_QUEUES) {
|
|
netif_cond_dbg(efx, probe, efx->net_dev, !rss_cpus, warn,
|
|
"Reducing number of rx queues from %u to %u.\n",
|
|
count, EF4_MAX_RX_QUEUES);
|
|
count = EF4_MAX_RX_QUEUES;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
/* Probe the number and type of interrupts we are able to obtain, and
|
|
* the resulting numbers of channels and RX queues.
|
|
*/
|
|
static int ef4_probe_interrupts(struct ef4_nic *efx)
|
|
{
|
|
unsigned int extra_channels = 0;
|
|
unsigned int i, j;
|
|
int rc;
|
|
|
|
for (i = 0; i < EF4_MAX_EXTRA_CHANNELS; i++)
|
|
if (efx->extra_channel_type[i])
|
|
++extra_channels;
|
|
|
|
if (efx->interrupt_mode == EF4_INT_MODE_MSIX) {
|
|
struct msix_entry xentries[EF4_MAX_CHANNELS];
|
|
unsigned int n_channels;
|
|
|
|
n_channels = ef4_wanted_parallelism(efx);
|
|
if (ef4_separate_tx_channels)
|
|
n_channels *= 2;
|
|
n_channels += extra_channels;
|
|
n_channels = min(n_channels, efx->max_channels);
|
|
|
|
for (i = 0; i < n_channels; i++)
|
|
xentries[i].entry = i;
|
|
rc = pci_enable_msix_range(efx->pci_dev,
|
|
xentries, 1, n_channels);
|
|
if (rc < 0) {
|
|
/* Fall back to single channel MSI */
|
|
efx->interrupt_mode = EF4_INT_MODE_MSI;
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"could not enable MSI-X\n");
|
|
} else if (rc < n_channels) {
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"WARNING: Insufficient MSI-X vectors"
|
|
" available (%d < %u).\n", rc, n_channels);
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"WARNING: Performance may be reduced.\n");
|
|
n_channels = rc;
|
|
}
|
|
|
|
if (rc > 0) {
|
|
efx->n_channels = n_channels;
|
|
if (n_channels > extra_channels)
|
|
n_channels -= extra_channels;
|
|
if (ef4_separate_tx_channels) {
|
|
efx->n_tx_channels = min(max(n_channels / 2,
|
|
1U),
|
|
efx->max_tx_channels);
|
|
efx->n_rx_channels = max(n_channels -
|
|
efx->n_tx_channels,
|
|
1U);
|
|
} else {
|
|
efx->n_tx_channels = min(n_channels,
|
|
efx->max_tx_channels);
|
|
efx->n_rx_channels = n_channels;
|
|
}
|
|
for (i = 0; i < efx->n_channels; i++)
|
|
ef4_get_channel(efx, i)->irq =
|
|
xentries[i].vector;
|
|
}
|
|
}
|
|
|
|
/* Try single interrupt MSI */
|
|
if (efx->interrupt_mode == EF4_INT_MODE_MSI) {
|
|
efx->n_channels = 1;
|
|
efx->n_rx_channels = 1;
|
|
efx->n_tx_channels = 1;
|
|
rc = pci_enable_msi(efx->pci_dev);
|
|
if (rc == 0) {
|
|
ef4_get_channel(efx, 0)->irq = efx->pci_dev->irq;
|
|
} else {
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"could not enable MSI\n");
|
|
efx->interrupt_mode = EF4_INT_MODE_LEGACY;
|
|
}
|
|
}
|
|
|
|
/* Assume legacy interrupts */
|
|
if (efx->interrupt_mode == EF4_INT_MODE_LEGACY) {
|
|
efx->n_channels = 1 + (ef4_separate_tx_channels ? 1 : 0);
|
|
efx->n_rx_channels = 1;
|
|
efx->n_tx_channels = 1;
|
|
efx->legacy_irq = efx->pci_dev->irq;
|
|
}
|
|
|
|
/* Assign extra channels if possible */
|
|
j = efx->n_channels;
|
|
for (i = 0; i < EF4_MAX_EXTRA_CHANNELS; i++) {
|
|
if (!efx->extra_channel_type[i])
|
|
continue;
|
|
if (efx->interrupt_mode != EF4_INT_MODE_MSIX ||
|
|
efx->n_channels <= extra_channels) {
|
|
efx->extra_channel_type[i]->handle_no_channel(efx);
|
|
} else {
|
|
--j;
|
|
ef4_get_channel(efx, j)->type =
|
|
efx->extra_channel_type[i];
|
|
}
|
|
}
|
|
|
|
efx->rss_spread = efx->n_rx_channels;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ef4_soft_enable_interrupts(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel, *end_channel;
|
|
int rc;
|
|
|
|
BUG_ON(efx->state == STATE_DISABLED);
|
|
|
|
efx->irq_soft_enabled = true;
|
|
smp_wmb();
|
|
|
|
ef4_for_each_channel(channel, efx) {
|
|
if (!channel->type->keep_eventq) {
|
|
rc = ef4_init_eventq(channel);
|
|
if (rc)
|
|
goto fail;
|
|
}
|
|
ef4_start_eventq(channel);
|
|
}
|
|
|
|
return 0;
|
|
fail:
|
|
end_channel = channel;
|
|
ef4_for_each_channel(channel, efx) {
|
|
if (channel == end_channel)
|
|
break;
|
|
ef4_stop_eventq(channel);
|
|
if (!channel->type->keep_eventq)
|
|
ef4_fini_eventq(channel);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void ef4_soft_disable_interrupts(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
|
|
if (efx->state == STATE_DISABLED)
|
|
return;
|
|
|
|
efx->irq_soft_enabled = false;
|
|
smp_wmb();
|
|
|
|
if (efx->legacy_irq)
|
|
synchronize_irq(efx->legacy_irq);
|
|
|
|
ef4_for_each_channel(channel, efx) {
|
|
if (channel->irq)
|
|
synchronize_irq(channel->irq);
|
|
|
|
ef4_stop_eventq(channel);
|
|
if (!channel->type->keep_eventq)
|
|
ef4_fini_eventq(channel);
|
|
}
|
|
}
|
|
|
|
static int ef4_enable_interrupts(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel, *end_channel;
|
|
int rc;
|
|
|
|
BUG_ON(efx->state == STATE_DISABLED);
|
|
|
|
if (efx->eeh_disabled_legacy_irq) {
|
|
enable_irq(efx->legacy_irq);
|
|
efx->eeh_disabled_legacy_irq = false;
|
|
}
|
|
|
|
efx->type->irq_enable_master(efx);
|
|
|
|
ef4_for_each_channel(channel, efx) {
|
|
if (channel->type->keep_eventq) {
|
|
rc = ef4_init_eventq(channel);
|
|
if (rc)
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
rc = ef4_soft_enable_interrupts(efx);
|
|
if (rc)
|
|
goto fail;
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
end_channel = channel;
|
|
ef4_for_each_channel(channel, efx) {
|
|
if (channel == end_channel)
|
|
break;
|
|
if (channel->type->keep_eventq)
|
|
ef4_fini_eventq(channel);
|
|
}
|
|
|
|
efx->type->irq_disable_non_ev(efx);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void ef4_disable_interrupts(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
|
|
ef4_soft_disable_interrupts(efx);
|
|
|
|
ef4_for_each_channel(channel, efx) {
|
|
if (channel->type->keep_eventq)
|
|
ef4_fini_eventq(channel);
|
|
}
|
|
|
|
efx->type->irq_disable_non_ev(efx);
|
|
}
|
|
|
|
static void ef4_remove_interrupts(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
|
|
/* Remove MSI/MSI-X interrupts */
|
|
ef4_for_each_channel(channel, efx)
|
|
channel->irq = 0;
|
|
pci_disable_msi(efx->pci_dev);
|
|
pci_disable_msix(efx->pci_dev);
|
|
|
|
/* Remove legacy interrupt */
|
|
efx->legacy_irq = 0;
|
|
}
|
|
|
|
static void ef4_set_channels(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
struct ef4_tx_queue *tx_queue;
|
|
|
|
efx->tx_channel_offset =
|
|
ef4_separate_tx_channels ?
|
|
efx->n_channels - efx->n_tx_channels : 0;
|
|
|
|
/* We need to mark which channels really have RX and TX
|
|
* queues, and adjust the TX queue numbers if we have separate
|
|
* RX-only and TX-only channels.
|
|
*/
|
|
ef4_for_each_channel(channel, efx) {
|
|
if (channel->channel < efx->n_rx_channels)
|
|
channel->rx_queue.core_index = channel->channel;
|
|
else
|
|
channel->rx_queue.core_index = -1;
|
|
|
|
ef4_for_each_channel_tx_queue(tx_queue, channel)
|
|
tx_queue->queue -= (efx->tx_channel_offset *
|
|
EF4_TXQ_TYPES);
|
|
}
|
|
}
|
|
|
|
static int ef4_probe_nic(struct ef4_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
netif_dbg(efx, probe, efx->net_dev, "creating NIC\n");
|
|
|
|
/* Carry out hardware-type specific initialisation */
|
|
rc = efx->type->probe(efx);
|
|
if (rc)
|
|
return rc;
|
|
|
|
do {
|
|
if (!efx->max_channels || !efx->max_tx_channels) {
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"Insufficient resources to allocate"
|
|
" any channels\n");
|
|
rc = -ENOSPC;
|
|
goto fail1;
|
|
}
|
|
|
|
/* Determine the number of channels and queues by trying
|
|
* to hook in MSI-X interrupts.
|
|
*/
|
|
rc = ef4_probe_interrupts(efx);
|
|
if (rc)
|
|
goto fail1;
|
|
|
|
ef4_set_channels(efx);
|
|
|
|
/* dimension_resources can fail with EAGAIN */
|
|
rc = efx->type->dimension_resources(efx);
|
|
if (rc != 0 && rc != -EAGAIN)
|
|
goto fail2;
|
|
|
|
if (rc == -EAGAIN)
|
|
/* try again with new max_channels */
|
|
ef4_remove_interrupts(efx);
|
|
|
|
} while (rc == -EAGAIN);
|
|
|
|
if (efx->n_channels > 1)
|
|
netdev_rss_key_fill(&efx->rx_hash_key,
|
|
sizeof(efx->rx_hash_key));
|
|
ef4_set_default_rx_indir_table(efx);
|
|
|
|
netif_set_real_num_tx_queues(efx->net_dev, efx->n_tx_channels);
|
|
netif_set_real_num_rx_queues(efx->net_dev, efx->n_rx_channels);
|
|
|
|
/* Initialise the interrupt moderation settings */
|
|
efx->irq_mod_step_us = DIV_ROUND_UP(efx->timer_quantum_ns, 1000);
|
|
ef4_init_irq_moderation(efx, tx_irq_mod_usec, rx_irq_mod_usec, true,
|
|
true);
|
|
|
|
return 0;
|
|
|
|
fail2:
|
|
ef4_remove_interrupts(efx);
|
|
fail1:
|
|
efx->type->remove(efx);
|
|
return rc;
|
|
}
|
|
|
|
static void ef4_remove_nic(struct ef4_nic *efx)
|
|
{
|
|
netif_dbg(efx, drv, efx->net_dev, "destroying NIC\n");
|
|
|
|
ef4_remove_interrupts(efx);
|
|
efx->type->remove(efx);
|
|
}
|
|
|
|
static int ef4_probe_filters(struct ef4_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
spin_lock_init(&efx->filter_lock);
|
|
init_rwsem(&efx->filter_sem);
|
|
mutex_lock(&efx->mac_lock);
|
|
down_write(&efx->filter_sem);
|
|
rc = efx->type->filter_table_probe(efx);
|
|
if (rc)
|
|
goto out_unlock;
|
|
|
|
#ifdef CONFIG_RFS_ACCEL
|
|
if (efx->type->offload_features & NETIF_F_NTUPLE) {
|
|
struct ef4_channel *channel;
|
|
int i, success = 1;
|
|
|
|
ef4_for_each_channel(channel, efx) {
|
|
channel->rps_flow_id =
|
|
kcalloc(efx->type->max_rx_ip_filters,
|
|
sizeof(*channel->rps_flow_id),
|
|
GFP_KERNEL);
|
|
if (!channel->rps_flow_id)
|
|
success = 0;
|
|
else
|
|
for (i = 0;
|
|
i < efx->type->max_rx_ip_filters;
|
|
++i)
|
|
channel->rps_flow_id[i] =
|
|
RPS_FLOW_ID_INVALID;
|
|
}
|
|
|
|
if (!success) {
|
|
ef4_for_each_channel(channel, efx)
|
|
kfree(channel->rps_flow_id);
|
|
efx->type->filter_table_remove(efx);
|
|
rc = -ENOMEM;
|
|
goto out_unlock;
|
|
}
|
|
|
|
efx->rps_expire_index = efx->rps_expire_channel = 0;
|
|
}
|
|
#endif
|
|
out_unlock:
|
|
up_write(&efx->filter_sem);
|
|
mutex_unlock(&efx->mac_lock);
|
|
return rc;
|
|
}
|
|
|
|
static void ef4_remove_filters(struct ef4_nic *efx)
|
|
{
|
|
#ifdef CONFIG_RFS_ACCEL
|
|
struct ef4_channel *channel;
|
|
|
|
ef4_for_each_channel(channel, efx)
|
|
kfree(channel->rps_flow_id);
|
|
#endif
|
|
down_write(&efx->filter_sem);
|
|
efx->type->filter_table_remove(efx);
|
|
up_write(&efx->filter_sem);
|
|
}
|
|
|
|
static void ef4_restore_filters(struct ef4_nic *efx)
|
|
{
|
|
down_read(&efx->filter_sem);
|
|
efx->type->filter_table_restore(efx);
|
|
up_read(&efx->filter_sem);
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* NIC startup/shutdown
|
|
*
|
|
*************************************************************************/
|
|
|
|
static int ef4_probe_all(struct ef4_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
rc = ef4_probe_nic(efx);
|
|
if (rc) {
|
|
netif_err(efx, probe, efx->net_dev, "failed to create NIC\n");
|
|
goto fail1;
|
|
}
|
|
|
|
rc = ef4_probe_port(efx);
|
|
if (rc) {
|
|
netif_err(efx, probe, efx->net_dev, "failed to create port\n");
|
|
goto fail2;
|
|
}
|
|
|
|
BUILD_BUG_ON(EF4_DEFAULT_DMAQ_SIZE < EF4_RXQ_MIN_ENT);
|
|
if (WARN_ON(EF4_DEFAULT_DMAQ_SIZE < EF4_TXQ_MIN_ENT(efx))) {
|
|
rc = -EINVAL;
|
|
goto fail3;
|
|
}
|
|
efx->rxq_entries = efx->txq_entries = EF4_DEFAULT_DMAQ_SIZE;
|
|
|
|
rc = ef4_probe_filters(efx);
|
|
if (rc) {
|
|
netif_err(efx, probe, efx->net_dev,
|
|
"failed to create filter tables\n");
|
|
goto fail4;
|
|
}
|
|
|
|
rc = ef4_probe_channels(efx);
|
|
if (rc)
|
|
goto fail5;
|
|
|
|
return 0;
|
|
|
|
fail5:
|
|
ef4_remove_filters(efx);
|
|
fail4:
|
|
fail3:
|
|
ef4_remove_port(efx);
|
|
fail2:
|
|
ef4_remove_nic(efx);
|
|
fail1:
|
|
return rc;
|
|
}
|
|
|
|
/* If the interface is supposed to be running but is not, start
|
|
* the hardware and software data path, regular activity for the port
|
|
* (MAC statistics, link polling, etc.) and schedule the port to be
|
|
* reconfigured. Interrupts must already be enabled. This function
|
|
* is safe to call multiple times, so long as the NIC is not disabled.
|
|
* Requires the RTNL lock.
|
|
*/
|
|
static void ef4_start_all(struct ef4_nic *efx)
|
|
{
|
|
EF4_ASSERT_RESET_SERIALISED(efx);
|
|
BUG_ON(efx->state == STATE_DISABLED);
|
|
|
|
/* Check that it is appropriate to restart the interface. All
|
|
* of these flags are safe to read under just the rtnl lock */
|
|
if (efx->port_enabled || !netif_running(efx->net_dev) ||
|
|
efx->reset_pending)
|
|
return;
|
|
|
|
ef4_start_port(efx);
|
|
ef4_start_datapath(efx);
|
|
|
|
/* Start the hardware monitor if there is one */
|
|
if (efx->type->monitor != NULL)
|
|
queue_delayed_work(efx->workqueue, &efx->monitor_work,
|
|
ef4_monitor_interval);
|
|
|
|
efx->type->start_stats(efx);
|
|
efx->type->pull_stats(efx);
|
|
spin_lock_bh(&efx->stats_lock);
|
|
efx->type->update_stats(efx, NULL, NULL);
|
|
spin_unlock_bh(&efx->stats_lock);
|
|
}
|
|
|
|
/* Quiesce the hardware and software data path, and regular activity
|
|
* for the port without bringing the link down. Safe to call multiple
|
|
* times with the NIC in almost any state, but interrupts should be
|
|
* enabled. Requires the RTNL lock.
|
|
*/
|
|
static void ef4_stop_all(struct ef4_nic *efx)
|
|
{
|
|
EF4_ASSERT_RESET_SERIALISED(efx);
|
|
|
|
/* port_enabled can be read safely under the rtnl lock */
|
|
if (!efx->port_enabled)
|
|
return;
|
|
|
|
/* update stats before we go down so we can accurately count
|
|
* rx_nodesc_drops
|
|
*/
|
|
efx->type->pull_stats(efx);
|
|
spin_lock_bh(&efx->stats_lock);
|
|
efx->type->update_stats(efx, NULL, NULL);
|
|
spin_unlock_bh(&efx->stats_lock);
|
|
efx->type->stop_stats(efx);
|
|
ef4_stop_port(efx);
|
|
|
|
/* Stop the kernel transmit interface. This is only valid if
|
|
* the device is stopped or detached; otherwise the watchdog
|
|
* may fire immediately.
|
|
*/
|
|
WARN_ON(netif_running(efx->net_dev) &&
|
|
netif_device_present(efx->net_dev));
|
|
netif_tx_disable(efx->net_dev);
|
|
|
|
ef4_stop_datapath(efx);
|
|
}
|
|
|
|
static void ef4_remove_all(struct ef4_nic *efx)
|
|
{
|
|
ef4_remove_channels(efx);
|
|
ef4_remove_filters(efx);
|
|
ef4_remove_port(efx);
|
|
ef4_remove_nic(efx);
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Interrupt moderation
|
|
*
|
|
**************************************************************************/
|
|
unsigned int ef4_usecs_to_ticks(struct ef4_nic *efx, unsigned int usecs)
|
|
{
|
|
if (usecs == 0)
|
|
return 0;
|
|
if (usecs * 1000 < efx->timer_quantum_ns)
|
|
return 1; /* never round down to 0 */
|
|
return usecs * 1000 / efx->timer_quantum_ns;
|
|
}
|
|
|
|
unsigned int ef4_ticks_to_usecs(struct ef4_nic *efx, unsigned int ticks)
|
|
{
|
|
/* We must round up when converting ticks to microseconds
|
|
* because we round down when converting the other way.
|
|
*/
|
|
return DIV_ROUND_UP(ticks * efx->timer_quantum_ns, 1000);
|
|
}
|
|
|
|
/* Set interrupt moderation parameters */
|
|
int ef4_init_irq_moderation(struct ef4_nic *efx, unsigned int tx_usecs,
|
|
unsigned int rx_usecs, bool rx_adaptive,
|
|
bool rx_may_override_tx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
unsigned int timer_max_us;
|
|
|
|
EF4_ASSERT_RESET_SERIALISED(efx);
|
|
|
|
timer_max_us = efx->timer_max_ns / 1000;
|
|
|
|
if (tx_usecs > timer_max_us || rx_usecs > timer_max_us)
|
|
return -EINVAL;
|
|
|
|
if (tx_usecs != rx_usecs && efx->tx_channel_offset == 0 &&
|
|
!rx_may_override_tx) {
|
|
netif_err(efx, drv, efx->net_dev, "Channels are shared. "
|
|
"RX and TX IRQ moderation must be equal\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
efx->irq_rx_adaptive = rx_adaptive;
|
|
efx->irq_rx_moderation_us = rx_usecs;
|
|
ef4_for_each_channel(channel, efx) {
|
|
if (ef4_channel_has_rx_queue(channel))
|
|
channel->irq_moderation_us = rx_usecs;
|
|
else if (ef4_channel_has_tx_queues(channel))
|
|
channel->irq_moderation_us = tx_usecs;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ef4_get_irq_moderation(struct ef4_nic *efx, unsigned int *tx_usecs,
|
|
unsigned int *rx_usecs, bool *rx_adaptive)
|
|
{
|
|
*rx_adaptive = efx->irq_rx_adaptive;
|
|
*rx_usecs = efx->irq_rx_moderation_us;
|
|
|
|
/* If channels are shared between RX and TX, so is IRQ
|
|
* moderation. Otherwise, IRQ moderation is the same for all
|
|
* TX channels and is not adaptive.
|
|
*/
|
|
if (efx->tx_channel_offset == 0) {
|
|
*tx_usecs = *rx_usecs;
|
|
} else {
|
|
struct ef4_channel *tx_channel;
|
|
|
|
tx_channel = efx->channel[efx->tx_channel_offset];
|
|
*tx_usecs = tx_channel->irq_moderation_us;
|
|
}
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Hardware monitor
|
|
*
|
|
**************************************************************************/
|
|
|
|
/* Run periodically off the general workqueue */
|
|
static void ef4_monitor(struct work_struct *data)
|
|
{
|
|
struct ef4_nic *efx = container_of(data, struct ef4_nic,
|
|
monitor_work.work);
|
|
|
|
netif_vdbg(efx, timer, efx->net_dev,
|
|
"hardware monitor executing on CPU %d\n",
|
|
raw_smp_processor_id());
|
|
BUG_ON(efx->type->monitor == NULL);
|
|
|
|
/* If the mac_lock is already held then it is likely a port
|
|
* reconfiguration is already in place, which will likely do
|
|
* most of the work of monitor() anyway. */
|
|
if (mutex_trylock(&efx->mac_lock)) {
|
|
if (efx->port_enabled)
|
|
efx->type->monitor(efx);
|
|
mutex_unlock(&efx->mac_lock);
|
|
}
|
|
|
|
queue_delayed_work(efx->workqueue, &efx->monitor_work,
|
|
ef4_monitor_interval);
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* ioctls
|
|
*
|
|
*************************************************************************/
|
|
|
|
/* Net device ioctl
|
|
* Context: process, rtnl_lock() held.
|
|
*/
|
|
static int ef4_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct ef4_nic *efx = netdev_priv(net_dev);
|
|
struct mii_ioctl_data *data = if_mii(ifr);
|
|
|
|
/* Convert phy_id from older PRTAD/DEVAD format */
|
|
if ((cmd == SIOCGMIIREG || cmd == SIOCSMIIREG) &&
|
|
(data->phy_id & 0xfc00) == 0x0400)
|
|
data->phy_id ^= MDIO_PHY_ID_C45 | 0x0400;
|
|
|
|
return mdio_mii_ioctl(&efx->mdio, data, cmd);
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* NAPI interface
|
|
*
|
|
**************************************************************************/
|
|
|
|
static void ef4_init_napi_channel(struct ef4_channel *channel)
|
|
{
|
|
struct ef4_nic *efx = channel->efx;
|
|
|
|
channel->napi_dev = efx->net_dev;
|
|
netif_napi_add(channel->napi_dev, &channel->napi_str,
|
|
ef4_poll, napi_weight);
|
|
}
|
|
|
|
static void ef4_init_napi(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
|
|
ef4_for_each_channel(channel, efx)
|
|
ef4_init_napi_channel(channel);
|
|
}
|
|
|
|
static void ef4_fini_napi_channel(struct ef4_channel *channel)
|
|
{
|
|
if (channel->napi_dev)
|
|
netif_napi_del(&channel->napi_str);
|
|
|
|
channel->napi_dev = NULL;
|
|
}
|
|
|
|
static void ef4_fini_napi(struct ef4_nic *efx)
|
|
{
|
|
struct ef4_channel *channel;
|
|
|
|
ef4_for_each_channel(channel, efx)
|
|
ef4_fini_napi_channel(channel);
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Kernel netpoll interface
|
|
*
|
|
*************************************************************************/
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
|
|
/* Although in the common case interrupts will be disabled, this is not
|
|
* guaranteed. However, all our work happens inside the NAPI callback,
|
|
* so no locking is required.
|
|
*/
|
|
static void ef4_netpoll(struct net_device *net_dev)
|
|
{
|
|
struct ef4_nic *efx = netdev_priv(net_dev);
|
|
struct ef4_channel *channel;
|
|
|
|
ef4_for_each_channel(channel, efx)
|
|
ef4_schedule_channel(channel);
|
|
}
|
|
|
|
#endif
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Kernel net device interface
|
|
*
|
|
*************************************************************************/
|
|
|
|
/* Context: process, rtnl_lock() held. */
|
|
int ef4_net_open(struct net_device *net_dev)
|
|
{
|
|
struct ef4_nic *efx = netdev_priv(net_dev);
|
|
int rc;
|
|
|
|
netif_dbg(efx, ifup, efx->net_dev, "opening device on CPU %d\n",
|
|
raw_smp_processor_id());
|
|
|
|
rc = ef4_check_disabled(efx);
|
|
if (rc)
|
|
return rc;
|
|
if (efx->phy_mode & PHY_MODE_SPECIAL)
|
|
return -EBUSY;
|
|
|
|
/* Notify the kernel of the link state polled during driver load,
|
|
* before the monitor starts running */
|
|
ef4_link_status_changed(efx);
|
|
|
|
ef4_start_all(efx);
|
|
ef4_selftest_async_start(efx);
|
|
return 0;
|
|
}
|
|
|
|
/* Context: process, rtnl_lock() held.
|
|
* Note that the kernel will ignore our return code; this method
|
|
* should really be a void.
|
|
*/
|
|
int ef4_net_stop(struct net_device *net_dev)
|
|
{
|
|
struct ef4_nic *efx = netdev_priv(net_dev);
|
|
|
|
netif_dbg(efx, ifdown, efx->net_dev, "closing on CPU %d\n",
|
|
raw_smp_processor_id());
|
|
|
|
/* Stop the device and flush all the channels */
|
|
ef4_stop_all(efx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Context: process, dev_base_lock or RTNL held, non-blocking. */
|
|
static void ef4_net_stats(struct net_device *net_dev,
|
|
struct rtnl_link_stats64 *stats)
|
|
{
|
|
struct ef4_nic *efx = netdev_priv(net_dev);
|
|
|
|
spin_lock_bh(&efx->stats_lock);
|
|
efx->type->update_stats(efx, NULL, stats);
|
|
spin_unlock_bh(&efx->stats_lock);
|
|
}
|
|
|
|
/* Context: netif_tx_lock held, BHs disabled. */
|
|
static void ef4_watchdog(struct net_device *net_dev)
|
|
{
|
|
struct ef4_nic *efx = netdev_priv(net_dev);
|
|
|
|
netif_err(efx, tx_err, efx->net_dev,
|
|
"TX stuck with port_enabled=%d: resetting channels\n",
|
|
efx->port_enabled);
|
|
|
|
ef4_schedule_reset(efx, RESET_TYPE_TX_WATCHDOG);
|
|
}
|
|
|
|
|
|
/* Context: process, rtnl_lock() held. */
|
|
static int ef4_change_mtu(struct net_device *net_dev, int new_mtu)
|
|
{
|
|
struct ef4_nic *efx = netdev_priv(net_dev);
|
|
int rc;
|
|
|
|
rc = ef4_check_disabled(efx);
|
|
if (rc)
|
|
return rc;
|
|
|
|
netif_dbg(efx, drv, efx->net_dev, "changing MTU to %d\n", new_mtu);
|
|
|
|
ef4_device_detach_sync(efx);
|
|
ef4_stop_all(efx);
|
|
|
|
mutex_lock(&efx->mac_lock);
|
|
net_dev->mtu = new_mtu;
|
|
ef4_mac_reconfigure(efx);
|
|
mutex_unlock(&efx->mac_lock);
|
|
|
|
ef4_start_all(efx);
|
|
netif_device_attach(efx->net_dev);
|
|
return 0;
|
|
}
|
|
|
|
static int ef4_set_mac_address(struct net_device *net_dev, void *data)
|
|
{
|
|
struct ef4_nic *efx = netdev_priv(net_dev);
|
|
struct sockaddr *addr = data;
|
|
u8 *new_addr = addr->sa_data;
|
|
u8 old_addr[6];
|
|
int rc;
|
|
|
|
if (!is_valid_ether_addr(new_addr)) {
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"invalid ethernet MAC address requested: %pM\n",
|
|
new_addr);
|
|
return -EADDRNOTAVAIL;
|
|
}
|
|
|
|
/* save old address */
|
|
ether_addr_copy(old_addr, net_dev->dev_addr);
|
|
ether_addr_copy(net_dev->dev_addr, new_addr);
|
|
if (efx->type->set_mac_address) {
|
|
rc = efx->type->set_mac_address(efx);
|
|
if (rc) {
|
|
ether_addr_copy(net_dev->dev_addr, old_addr);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
/* Reconfigure the MAC */
|
|
mutex_lock(&efx->mac_lock);
|
|
ef4_mac_reconfigure(efx);
|
|
mutex_unlock(&efx->mac_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Context: netif_addr_lock held, BHs disabled. */
|
|
static void ef4_set_rx_mode(struct net_device *net_dev)
|
|
{
|
|
struct ef4_nic *efx = netdev_priv(net_dev);
|
|
|
|
if (efx->port_enabled)
|
|
queue_work(efx->workqueue, &efx->mac_work);
|
|
/* Otherwise ef4_start_port() will do this */
|
|
}
|
|
|
|
static int ef4_set_features(struct net_device *net_dev, netdev_features_t data)
|
|
{
|
|
struct ef4_nic *efx = netdev_priv(net_dev);
|
|
int rc;
|
|
|
|
/* If disabling RX n-tuple filtering, clear existing filters */
|
|
if (net_dev->features & ~data & NETIF_F_NTUPLE) {
|
|
rc = efx->type->filter_clear_rx(efx, EF4_FILTER_PRI_MANUAL);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
/* If Rx VLAN filter is changed, update filters via mac_reconfigure */
|
|
if ((net_dev->features ^ data) & NETIF_F_HW_VLAN_CTAG_FILTER) {
|
|
/* ef4_set_rx_mode() will schedule MAC work to update filters
|
|
* when a new features are finally set in net_dev.
|
|
*/
|
|
ef4_set_rx_mode(net_dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops ef4_netdev_ops = {
|
|
.ndo_open = ef4_net_open,
|
|
.ndo_stop = ef4_net_stop,
|
|
.ndo_get_stats64 = ef4_net_stats,
|
|
.ndo_tx_timeout = ef4_watchdog,
|
|
.ndo_start_xmit = ef4_hard_start_xmit,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_do_ioctl = ef4_ioctl,
|
|
.ndo_change_mtu = ef4_change_mtu,
|
|
.ndo_set_mac_address = ef4_set_mac_address,
|
|
.ndo_set_rx_mode = ef4_set_rx_mode,
|
|
.ndo_set_features = ef4_set_features,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = ef4_netpoll,
|
|
#endif
|
|
.ndo_setup_tc = ef4_setup_tc,
|
|
#ifdef CONFIG_RFS_ACCEL
|
|
.ndo_rx_flow_steer = ef4_filter_rfs,
|
|
#endif
|
|
};
|
|
|
|
static void ef4_update_name(struct ef4_nic *efx)
|
|
{
|
|
strcpy(efx->name, efx->net_dev->name);
|
|
ef4_mtd_rename(efx);
|
|
ef4_set_channel_names(efx);
|
|
}
|
|
|
|
static int ef4_netdev_event(struct notifier_block *this,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct net_device *net_dev = netdev_notifier_info_to_dev(ptr);
|
|
|
|
if ((net_dev->netdev_ops == &ef4_netdev_ops) &&
|
|
event == NETDEV_CHANGENAME)
|
|
ef4_update_name(netdev_priv(net_dev));
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block ef4_netdev_notifier = {
|
|
.notifier_call = ef4_netdev_event,
|
|
};
|
|
|
|
static ssize_t
|
|
show_phy_type(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct ef4_nic *efx = pci_get_drvdata(to_pci_dev(dev));
|
|
return sprintf(buf, "%d\n", efx->phy_type);
|
|
}
|
|
static DEVICE_ATTR(phy_type, 0444, show_phy_type, NULL);
|
|
|
|
static int ef4_register_netdev(struct ef4_nic *efx)
|
|
{
|
|
struct net_device *net_dev = efx->net_dev;
|
|
struct ef4_channel *channel;
|
|
int rc;
|
|
|
|
net_dev->watchdog_timeo = 5 * HZ;
|
|
net_dev->irq = efx->pci_dev->irq;
|
|
net_dev->netdev_ops = &ef4_netdev_ops;
|
|
net_dev->ethtool_ops = &ef4_ethtool_ops;
|
|
net_dev->gso_max_segs = EF4_TSO_MAX_SEGS;
|
|
net_dev->min_mtu = EF4_MIN_MTU;
|
|
net_dev->max_mtu = EF4_MAX_MTU;
|
|
|
|
rtnl_lock();
|
|
|
|
/* Enable resets to be scheduled and check whether any were
|
|
* already requested. If so, the NIC is probably hosed so we
|
|
* abort.
|
|
*/
|
|
efx->state = STATE_READY;
|
|
smp_mb(); /* ensure we change state before checking reset_pending */
|
|
if (efx->reset_pending) {
|
|
netif_err(efx, probe, efx->net_dev,
|
|
"aborting probe due to scheduled reset\n");
|
|
rc = -EIO;
|
|
goto fail_locked;
|
|
}
|
|
|
|
rc = dev_alloc_name(net_dev, net_dev->name);
|
|
if (rc < 0)
|
|
goto fail_locked;
|
|
ef4_update_name(efx);
|
|
|
|
/* Always start with carrier off; PHY events will detect the link */
|
|
netif_carrier_off(net_dev);
|
|
|
|
rc = register_netdevice(net_dev);
|
|
if (rc)
|
|
goto fail_locked;
|
|
|
|
ef4_for_each_channel(channel, efx) {
|
|
struct ef4_tx_queue *tx_queue;
|
|
ef4_for_each_channel_tx_queue(tx_queue, channel)
|
|
ef4_init_tx_queue_core_txq(tx_queue);
|
|
}
|
|
|
|
ef4_associate(efx);
|
|
|
|
rtnl_unlock();
|
|
|
|
rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_type);
|
|
if (rc) {
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"failed to init net dev attributes\n");
|
|
goto fail_registered;
|
|
}
|
|
return 0;
|
|
|
|
fail_registered:
|
|
rtnl_lock();
|
|
ef4_dissociate(efx);
|
|
unregister_netdevice(net_dev);
|
|
fail_locked:
|
|
efx->state = STATE_UNINIT;
|
|
rtnl_unlock();
|
|
netif_err(efx, drv, efx->net_dev, "could not register net dev\n");
|
|
return rc;
|
|
}
|
|
|
|
static void ef4_unregister_netdev(struct ef4_nic *efx)
|
|
{
|
|
if (!efx->net_dev)
|
|
return;
|
|
|
|
BUG_ON(netdev_priv(efx->net_dev) != efx);
|
|
|
|
if (ef4_dev_registered(efx)) {
|
|
strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name));
|
|
device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_type);
|
|
unregister_netdev(efx->net_dev);
|
|
}
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Device reset and suspend
|
|
*
|
|
**************************************************************************/
|
|
|
|
/* Tears down the entire software state and most of the hardware state
|
|
* before reset. */
|
|
void ef4_reset_down(struct ef4_nic *efx, enum reset_type method)
|
|
{
|
|
EF4_ASSERT_RESET_SERIALISED(efx);
|
|
|
|
ef4_stop_all(efx);
|
|
ef4_disable_interrupts(efx);
|
|
|
|
mutex_lock(&efx->mac_lock);
|
|
if (efx->port_initialized && method != RESET_TYPE_INVISIBLE &&
|
|
method != RESET_TYPE_DATAPATH)
|
|
efx->phy_op->fini(efx);
|
|
efx->type->fini(efx);
|
|
}
|
|
|
|
/* This function will always ensure that the locks acquired in
|
|
* ef4_reset_down() are released. A failure return code indicates
|
|
* that we were unable to reinitialise the hardware, and the
|
|
* driver should be disabled. If ok is false, then the rx and tx
|
|
* engines are not restarted, pending a RESET_DISABLE. */
|
|
int ef4_reset_up(struct ef4_nic *efx, enum reset_type method, bool ok)
|
|
{
|
|
int rc;
|
|
|
|
EF4_ASSERT_RESET_SERIALISED(efx);
|
|
|
|
/* Ensure that SRAM is initialised even if we're disabling the device */
|
|
rc = efx->type->init(efx);
|
|
if (rc) {
|
|
netif_err(efx, drv, efx->net_dev, "failed to initialise NIC\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (!ok)
|
|
goto fail;
|
|
|
|
if (efx->port_initialized && method != RESET_TYPE_INVISIBLE &&
|
|
method != RESET_TYPE_DATAPATH) {
|
|
rc = efx->phy_op->init(efx);
|
|
if (rc)
|
|
goto fail;
|
|
rc = efx->phy_op->reconfigure(efx);
|
|
if (rc && rc != -EPERM)
|
|
netif_err(efx, drv, efx->net_dev,
|
|
"could not restore PHY settings\n");
|
|
}
|
|
|
|
rc = ef4_enable_interrupts(efx);
|
|
if (rc)
|
|
goto fail;
|
|
|
|
down_read(&efx->filter_sem);
|
|
ef4_restore_filters(efx);
|
|
up_read(&efx->filter_sem);
|
|
|
|
mutex_unlock(&efx->mac_lock);
|
|
|
|
ef4_start_all(efx);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
efx->port_initialized = false;
|
|
|
|
mutex_unlock(&efx->mac_lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* Reset the NIC using the specified method. Note that the reset may
|
|
* fail, in which case the card will be left in an unusable state.
|
|
*
|
|
* Caller must hold the rtnl_lock.
|
|
*/
|
|
int ef4_reset(struct ef4_nic *efx, enum reset_type method)
|
|
{
|
|
int rc, rc2;
|
|
bool disabled;
|
|
|
|
netif_info(efx, drv, efx->net_dev, "resetting (%s)\n",
|
|
RESET_TYPE(method));
|
|
|
|
ef4_device_detach_sync(efx);
|
|
ef4_reset_down(efx, method);
|
|
|
|
rc = efx->type->reset(efx, method);
|
|
if (rc) {
|
|
netif_err(efx, drv, efx->net_dev, "failed to reset hardware\n");
|
|
goto out;
|
|
}
|
|
|
|
/* Clear flags for the scopes we covered. We assume the NIC and
|
|
* driver are now quiescent so that there is no race here.
|
|
*/
|
|
if (method < RESET_TYPE_MAX_METHOD)
|
|
efx->reset_pending &= -(1 << (method + 1));
|
|
else /* it doesn't fit into the well-ordered scope hierarchy */
|
|
__clear_bit(method, &efx->reset_pending);
|
|
|
|
/* Reinitialise bus-mastering, which may have been turned off before
|
|
* the reset was scheduled. This is still appropriate, even in the
|
|
* RESET_TYPE_DISABLE since this driver generally assumes the hardware
|
|
* can respond to requests. */
|
|
pci_set_master(efx->pci_dev);
|
|
|
|
out:
|
|
/* Leave device stopped if necessary */
|
|
disabled = rc ||
|
|
method == RESET_TYPE_DISABLE ||
|
|
method == RESET_TYPE_RECOVER_OR_DISABLE;
|
|
rc2 = ef4_reset_up(efx, method, !disabled);
|
|
if (rc2) {
|
|
disabled = true;
|
|
if (!rc)
|
|
rc = rc2;
|
|
}
|
|
|
|
if (disabled) {
|
|
dev_close(efx->net_dev);
|
|
netif_err(efx, drv, efx->net_dev, "has been disabled\n");
|
|
efx->state = STATE_DISABLED;
|
|
} else {
|
|
netif_dbg(efx, drv, efx->net_dev, "reset complete\n");
|
|
netif_device_attach(efx->net_dev);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/* Try recovery mechanisms.
|
|
* For now only EEH is supported.
|
|
* Returns 0 if the recovery mechanisms are unsuccessful.
|
|
* Returns a non-zero value otherwise.
|
|
*/
|
|
int ef4_try_recovery(struct ef4_nic *efx)
|
|
{
|
|
#ifdef CONFIG_EEH
|
|
/* A PCI error can occur and not be seen by EEH because nothing
|
|
* happens on the PCI bus. In this case the driver may fail and
|
|
* schedule a 'recover or reset', leading to this recovery handler.
|
|
* Manually call the eeh failure check function.
|
|
*/
|
|
struct eeh_dev *eehdev = pci_dev_to_eeh_dev(efx->pci_dev);
|
|
if (eeh_dev_check_failure(eehdev)) {
|
|
/* The EEH mechanisms will handle the error and reset the
|
|
* device if necessary.
|
|
*/
|
|
return 1;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/* The worker thread exists so that code that cannot sleep can
|
|
* schedule a reset for later.
|
|
*/
|
|
static void ef4_reset_work(struct work_struct *data)
|
|
{
|
|
struct ef4_nic *efx = container_of(data, struct ef4_nic, reset_work);
|
|
unsigned long pending;
|
|
enum reset_type method;
|
|
|
|
pending = READ_ONCE(efx->reset_pending);
|
|
method = fls(pending) - 1;
|
|
|
|
if ((method == RESET_TYPE_RECOVER_OR_DISABLE ||
|
|
method == RESET_TYPE_RECOVER_OR_ALL) &&
|
|
ef4_try_recovery(efx))
|
|
return;
|
|
|
|
if (!pending)
|
|
return;
|
|
|
|
rtnl_lock();
|
|
|
|
/* We checked the state in ef4_schedule_reset() but it may
|
|
* have changed by now. Now that we have the RTNL lock,
|
|
* it cannot change again.
|
|
*/
|
|
if (efx->state == STATE_READY)
|
|
(void)ef4_reset(efx, method);
|
|
|
|
rtnl_unlock();
|
|
}
|
|
|
|
void ef4_schedule_reset(struct ef4_nic *efx, enum reset_type type)
|
|
{
|
|
enum reset_type method;
|
|
|
|
if (efx->state == STATE_RECOVERY) {
|
|
netif_dbg(efx, drv, efx->net_dev,
|
|
"recovering: skip scheduling %s reset\n",
|
|
RESET_TYPE(type));
|
|
return;
|
|
}
|
|
|
|
switch (type) {
|
|
case RESET_TYPE_INVISIBLE:
|
|
case RESET_TYPE_ALL:
|
|
case RESET_TYPE_RECOVER_OR_ALL:
|
|
case RESET_TYPE_WORLD:
|
|
case RESET_TYPE_DISABLE:
|
|
case RESET_TYPE_RECOVER_OR_DISABLE:
|
|
case RESET_TYPE_DATAPATH:
|
|
method = type;
|
|
netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n",
|
|
RESET_TYPE(method));
|
|
break;
|
|
default:
|
|
method = efx->type->map_reset_reason(type);
|
|
netif_dbg(efx, drv, efx->net_dev,
|
|
"scheduling %s reset for %s\n",
|
|
RESET_TYPE(method), RESET_TYPE(type));
|
|
break;
|
|
}
|
|
|
|
set_bit(method, &efx->reset_pending);
|
|
smp_mb(); /* ensure we change reset_pending before checking state */
|
|
|
|
/* If we're not READY then just leave the flags set as the cue
|
|
* to abort probing or reschedule the reset later.
|
|
*/
|
|
if (READ_ONCE(efx->state) != STATE_READY)
|
|
return;
|
|
|
|
queue_work(reset_workqueue, &efx->reset_work);
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* List of NICs we support
|
|
*
|
|
**************************************************************************/
|
|
|
|
/* PCI device ID table */
|
|
static const struct pci_device_id ef4_pci_table[] = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE,
|
|
PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0),
|
|
.driver_data = (unsigned long) &falcon_a1_nic_type},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE,
|
|
PCI_DEVICE_ID_SOLARFLARE_SFC4000B),
|
|
.driver_data = (unsigned long) &falcon_b0_nic_type},
|
|
{0} /* end of list */
|
|
};
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Dummy PHY/MAC operations
|
|
*
|
|
* Can be used for some unimplemented operations
|
|
* Needed so all function pointers are valid and do not have to be tested
|
|
* before use
|
|
*
|
|
**************************************************************************/
|
|
int ef4_port_dummy_op_int(struct ef4_nic *efx)
|
|
{
|
|
return 0;
|
|
}
|
|
void ef4_port_dummy_op_void(struct ef4_nic *efx) {}
|
|
|
|
static bool ef4_port_dummy_op_poll(struct ef4_nic *efx)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
static const struct ef4_phy_operations ef4_dummy_phy_operations = {
|
|
.init = ef4_port_dummy_op_int,
|
|
.reconfigure = ef4_port_dummy_op_int,
|
|
.poll = ef4_port_dummy_op_poll,
|
|
.fini = ef4_port_dummy_op_void,
|
|
};
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Data housekeeping
|
|
*
|
|
**************************************************************************/
|
|
|
|
/* This zeroes out and then fills in the invariants in a struct
|
|
* ef4_nic (including all sub-structures).
|
|
*/
|
|
static int ef4_init_struct(struct ef4_nic *efx,
|
|
struct pci_dev *pci_dev, struct net_device *net_dev)
|
|
{
|
|
int i;
|
|
|
|
/* Initialise common structures */
|
|
INIT_LIST_HEAD(&efx->node);
|
|
INIT_LIST_HEAD(&efx->secondary_list);
|
|
spin_lock_init(&efx->biu_lock);
|
|
#ifdef CONFIG_SFC_FALCON_MTD
|
|
INIT_LIST_HEAD(&efx->mtd_list);
|
|
#endif
|
|
INIT_WORK(&efx->reset_work, ef4_reset_work);
|
|
INIT_DELAYED_WORK(&efx->monitor_work, ef4_monitor);
|
|
INIT_DELAYED_WORK(&efx->selftest_work, ef4_selftest_async_work);
|
|
efx->pci_dev = pci_dev;
|
|
efx->msg_enable = debug;
|
|
efx->state = STATE_UNINIT;
|
|
strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name));
|
|
|
|
efx->net_dev = net_dev;
|
|
efx->rx_prefix_size = efx->type->rx_prefix_size;
|
|
efx->rx_ip_align =
|
|
NET_IP_ALIGN ? (efx->rx_prefix_size + NET_IP_ALIGN) % 4 : 0;
|
|
efx->rx_packet_hash_offset =
|
|
efx->type->rx_hash_offset - efx->type->rx_prefix_size;
|
|
efx->rx_packet_ts_offset =
|
|
efx->type->rx_ts_offset - efx->type->rx_prefix_size;
|
|
spin_lock_init(&efx->stats_lock);
|
|
mutex_init(&efx->mac_lock);
|
|
efx->phy_op = &ef4_dummy_phy_operations;
|
|
efx->mdio.dev = net_dev;
|
|
INIT_WORK(&efx->mac_work, ef4_mac_work);
|
|
init_waitqueue_head(&efx->flush_wq);
|
|
|
|
for (i = 0; i < EF4_MAX_CHANNELS; i++) {
|
|
efx->channel[i] = ef4_alloc_channel(efx, i, NULL);
|
|
if (!efx->channel[i])
|
|
goto fail;
|
|
efx->msi_context[i].efx = efx;
|
|
efx->msi_context[i].index = i;
|
|
}
|
|
|
|
/* Higher numbered interrupt modes are less capable! */
|
|
efx->interrupt_mode = max(efx->type->max_interrupt_mode,
|
|
interrupt_mode);
|
|
|
|
/* Would be good to use the net_dev name, but we're too early */
|
|
snprintf(efx->workqueue_name, sizeof(efx->workqueue_name), "sfc%s",
|
|
pci_name(pci_dev));
|
|
efx->workqueue = create_singlethread_workqueue(efx->workqueue_name);
|
|
if (!efx->workqueue)
|
|
goto fail;
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
ef4_fini_struct(efx);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void ef4_fini_struct(struct ef4_nic *efx)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < EF4_MAX_CHANNELS; i++)
|
|
kfree(efx->channel[i]);
|
|
|
|
kfree(efx->vpd_sn);
|
|
|
|
if (efx->workqueue) {
|
|
destroy_workqueue(efx->workqueue);
|
|
efx->workqueue = NULL;
|
|
}
|
|
}
|
|
|
|
void ef4_update_sw_stats(struct ef4_nic *efx, u64 *stats)
|
|
{
|
|
u64 n_rx_nodesc_trunc = 0;
|
|
struct ef4_channel *channel;
|
|
|
|
ef4_for_each_channel(channel, efx)
|
|
n_rx_nodesc_trunc += channel->n_rx_nodesc_trunc;
|
|
stats[GENERIC_STAT_rx_nodesc_trunc] = n_rx_nodesc_trunc;
|
|
stats[GENERIC_STAT_rx_noskb_drops] = atomic_read(&efx->n_rx_noskb_drops);
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* PCI interface
|
|
*
|
|
**************************************************************************/
|
|
|
|
/* Main body of final NIC shutdown code
|
|
* This is called only at module unload (or hotplug removal).
|
|
*/
|
|
static void ef4_pci_remove_main(struct ef4_nic *efx)
|
|
{
|
|
/* Flush reset_work. It can no longer be scheduled since we
|
|
* are not READY.
|
|
*/
|
|
BUG_ON(efx->state == STATE_READY);
|
|
cancel_work_sync(&efx->reset_work);
|
|
|
|
ef4_disable_interrupts(efx);
|
|
ef4_nic_fini_interrupt(efx);
|
|
ef4_fini_port(efx);
|
|
efx->type->fini(efx);
|
|
ef4_fini_napi(efx);
|
|
ef4_remove_all(efx);
|
|
}
|
|
|
|
/* Final NIC shutdown
|
|
* This is called only at module unload (or hotplug removal). A PF can call
|
|
* this on its VFs to ensure they are unbound first.
|
|
*/
|
|
static void ef4_pci_remove(struct pci_dev *pci_dev)
|
|
{
|
|
struct ef4_nic *efx;
|
|
|
|
efx = pci_get_drvdata(pci_dev);
|
|
if (!efx)
|
|
return;
|
|
|
|
/* Mark the NIC as fini, then stop the interface */
|
|
rtnl_lock();
|
|
ef4_dissociate(efx);
|
|
dev_close(efx->net_dev);
|
|
ef4_disable_interrupts(efx);
|
|
efx->state = STATE_UNINIT;
|
|
rtnl_unlock();
|
|
|
|
ef4_unregister_netdev(efx);
|
|
|
|
ef4_mtd_remove(efx);
|
|
|
|
ef4_pci_remove_main(efx);
|
|
|
|
ef4_fini_io(efx);
|
|
netif_dbg(efx, drv, efx->net_dev, "shutdown successful\n");
|
|
|
|
ef4_fini_struct(efx);
|
|
free_netdev(efx->net_dev);
|
|
|
|
pci_disable_pcie_error_reporting(pci_dev);
|
|
};
|
|
|
|
/* NIC VPD information
|
|
* Called during probe to display the part number of the
|
|
* installed NIC. VPD is potentially very large but this should
|
|
* always appear within the first 512 bytes.
|
|
*/
|
|
#define SFC_VPD_LEN 512
|
|
static void ef4_probe_vpd_strings(struct ef4_nic *efx)
|
|
{
|
|
struct pci_dev *dev = efx->pci_dev;
|
|
char vpd_data[SFC_VPD_LEN];
|
|
ssize_t vpd_size;
|
|
int ro_start, ro_size, i, j;
|
|
|
|
/* Get the vpd data from the device */
|
|
vpd_size = pci_read_vpd(dev, 0, sizeof(vpd_data), vpd_data);
|
|
if (vpd_size <= 0) {
|
|
netif_err(efx, drv, efx->net_dev, "Unable to read VPD\n");
|
|
return;
|
|
}
|
|
|
|
/* Get the Read only section */
|
|
ro_start = pci_vpd_find_tag(vpd_data, 0, vpd_size, PCI_VPD_LRDT_RO_DATA);
|
|
if (ro_start < 0) {
|
|
netif_err(efx, drv, efx->net_dev, "VPD Read-only not found\n");
|
|
return;
|
|
}
|
|
|
|
ro_size = pci_vpd_lrdt_size(&vpd_data[ro_start]);
|
|
j = ro_size;
|
|
i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
|
|
if (i + j > vpd_size)
|
|
j = vpd_size - i;
|
|
|
|
/* Get the Part number */
|
|
i = pci_vpd_find_info_keyword(vpd_data, i, j, "PN");
|
|
if (i < 0) {
|
|
netif_err(efx, drv, efx->net_dev, "Part number not found\n");
|
|
return;
|
|
}
|
|
|
|
j = pci_vpd_info_field_size(&vpd_data[i]);
|
|
i += PCI_VPD_INFO_FLD_HDR_SIZE;
|
|
if (i + j > vpd_size) {
|
|
netif_err(efx, drv, efx->net_dev, "Incomplete part number\n");
|
|
return;
|
|
}
|
|
|
|
netif_info(efx, drv, efx->net_dev,
|
|
"Part Number : %.*s\n", j, &vpd_data[i]);
|
|
|
|
i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
|
|
j = ro_size;
|
|
i = pci_vpd_find_info_keyword(vpd_data, i, j, "SN");
|
|
if (i < 0) {
|
|
netif_err(efx, drv, efx->net_dev, "Serial number not found\n");
|
|
return;
|
|
}
|
|
|
|
j = pci_vpd_info_field_size(&vpd_data[i]);
|
|
i += PCI_VPD_INFO_FLD_HDR_SIZE;
|
|
if (i + j > vpd_size) {
|
|
netif_err(efx, drv, efx->net_dev, "Incomplete serial number\n");
|
|
return;
|
|
}
|
|
|
|
efx->vpd_sn = kmalloc(j + 1, GFP_KERNEL);
|
|
if (!efx->vpd_sn)
|
|
return;
|
|
|
|
snprintf(efx->vpd_sn, j + 1, "%s", &vpd_data[i]);
|
|
}
|
|
|
|
|
|
/* Main body of NIC initialisation
|
|
* This is called at module load (or hotplug insertion, theoretically).
|
|
*/
|
|
static int ef4_pci_probe_main(struct ef4_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
/* Do start-of-day initialisation */
|
|
rc = ef4_probe_all(efx);
|
|
if (rc)
|
|
goto fail1;
|
|
|
|
ef4_init_napi(efx);
|
|
|
|
rc = efx->type->init(efx);
|
|
if (rc) {
|
|
netif_err(efx, probe, efx->net_dev,
|
|
"failed to initialise NIC\n");
|
|
goto fail3;
|
|
}
|
|
|
|
rc = ef4_init_port(efx);
|
|
if (rc) {
|
|
netif_err(efx, probe, efx->net_dev,
|
|
"failed to initialise port\n");
|
|
goto fail4;
|
|
}
|
|
|
|
rc = ef4_nic_init_interrupt(efx);
|
|
if (rc)
|
|
goto fail5;
|
|
rc = ef4_enable_interrupts(efx);
|
|
if (rc)
|
|
goto fail6;
|
|
|
|
return 0;
|
|
|
|
fail6:
|
|
ef4_nic_fini_interrupt(efx);
|
|
fail5:
|
|
ef4_fini_port(efx);
|
|
fail4:
|
|
efx->type->fini(efx);
|
|
fail3:
|
|
ef4_fini_napi(efx);
|
|
ef4_remove_all(efx);
|
|
fail1:
|
|
return rc;
|
|
}
|
|
|
|
/* NIC initialisation
|
|
*
|
|
* This is called at module load (or hotplug insertion,
|
|
* theoretically). It sets up PCI mappings, resets the NIC,
|
|
* sets up and registers the network devices with the kernel and hooks
|
|
* the interrupt service routine. It does not prepare the device for
|
|
* transmission; this is left to the first time one of the network
|
|
* interfaces is brought up (i.e. ef4_net_open).
|
|
*/
|
|
static int ef4_pci_probe(struct pci_dev *pci_dev,
|
|
const struct pci_device_id *entry)
|
|
{
|
|
struct net_device *net_dev;
|
|
struct ef4_nic *efx;
|
|
int rc;
|
|
|
|
/* Allocate and initialise a struct net_device and struct ef4_nic */
|
|
net_dev = alloc_etherdev_mqs(sizeof(*efx), EF4_MAX_CORE_TX_QUEUES,
|
|
EF4_MAX_RX_QUEUES);
|
|
if (!net_dev)
|
|
return -ENOMEM;
|
|
efx = netdev_priv(net_dev);
|
|
efx->type = (const struct ef4_nic_type *) entry->driver_data;
|
|
efx->fixed_features |= NETIF_F_HIGHDMA;
|
|
|
|
pci_set_drvdata(pci_dev, efx);
|
|
SET_NETDEV_DEV(net_dev, &pci_dev->dev);
|
|
rc = ef4_init_struct(efx, pci_dev, net_dev);
|
|
if (rc)
|
|
goto fail1;
|
|
|
|
netif_info(efx, probe, efx->net_dev,
|
|
"Solarflare NIC detected\n");
|
|
|
|
ef4_probe_vpd_strings(efx);
|
|
|
|
/* Set up basic I/O (BAR mappings etc) */
|
|
rc = ef4_init_io(efx);
|
|
if (rc)
|
|
goto fail2;
|
|
|
|
rc = ef4_pci_probe_main(efx);
|
|
if (rc)
|
|
goto fail3;
|
|
|
|
net_dev->features |= (efx->type->offload_features | NETIF_F_SG |
|
|
NETIF_F_RXCSUM);
|
|
/* Mask for features that also apply to VLAN devices */
|
|
net_dev->vlan_features |= (NETIF_F_HW_CSUM | NETIF_F_SG |
|
|
NETIF_F_HIGHDMA | NETIF_F_RXCSUM);
|
|
|
|
net_dev->hw_features = net_dev->features & ~efx->fixed_features;
|
|
|
|
/* Disable VLAN filtering by default. It may be enforced if
|
|
* the feature is fixed (i.e. VLAN filters are required to
|
|
* receive VLAN tagged packets due to vPort restrictions).
|
|
*/
|
|
net_dev->features &= ~NETIF_F_HW_VLAN_CTAG_FILTER;
|
|
net_dev->features |= efx->fixed_features;
|
|
|
|
rc = ef4_register_netdev(efx);
|
|
if (rc)
|
|
goto fail4;
|
|
|
|
netif_dbg(efx, probe, efx->net_dev, "initialisation successful\n");
|
|
|
|
/* Try to create MTDs, but allow this to fail */
|
|
rtnl_lock();
|
|
rc = ef4_mtd_probe(efx);
|
|
rtnl_unlock();
|
|
if (rc && rc != -EPERM)
|
|
netif_warn(efx, probe, efx->net_dev,
|
|
"failed to create MTDs (%d)\n", rc);
|
|
|
|
rc = pci_enable_pcie_error_reporting(pci_dev);
|
|
if (rc && rc != -EINVAL)
|
|
netif_notice(efx, probe, efx->net_dev,
|
|
"PCIE error reporting unavailable (%d).\n",
|
|
rc);
|
|
|
|
return 0;
|
|
|
|
fail4:
|
|
ef4_pci_remove_main(efx);
|
|
fail3:
|
|
ef4_fini_io(efx);
|
|
fail2:
|
|
ef4_fini_struct(efx);
|
|
fail1:
|
|
WARN_ON(rc > 0);
|
|
netif_dbg(efx, drv, efx->net_dev, "initialisation failed. rc=%d\n", rc);
|
|
free_netdev(net_dev);
|
|
return rc;
|
|
}
|
|
|
|
static int ef4_pm_freeze(struct device *dev)
|
|
{
|
|
struct ef4_nic *efx = pci_get_drvdata(to_pci_dev(dev));
|
|
|
|
rtnl_lock();
|
|
|
|
if (efx->state != STATE_DISABLED) {
|
|
efx->state = STATE_UNINIT;
|
|
|
|
ef4_device_detach_sync(efx);
|
|
|
|
ef4_stop_all(efx);
|
|
ef4_disable_interrupts(efx);
|
|
}
|
|
|
|
rtnl_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ef4_pm_thaw(struct device *dev)
|
|
{
|
|
int rc;
|
|
struct ef4_nic *efx = pci_get_drvdata(to_pci_dev(dev));
|
|
|
|
rtnl_lock();
|
|
|
|
if (efx->state != STATE_DISABLED) {
|
|
rc = ef4_enable_interrupts(efx);
|
|
if (rc)
|
|
goto fail;
|
|
|
|
mutex_lock(&efx->mac_lock);
|
|
efx->phy_op->reconfigure(efx);
|
|
mutex_unlock(&efx->mac_lock);
|
|
|
|
ef4_start_all(efx);
|
|
|
|
netif_device_attach(efx->net_dev);
|
|
|
|
efx->state = STATE_READY;
|
|
|
|
efx->type->resume_wol(efx);
|
|
}
|
|
|
|
rtnl_unlock();
|
|
|
|
/* Reschedule any quenched resets scheduled during ef4_pm_freeze() */
|
|
queue_work(reset_workqueue, &efx->reset_work);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
rtnl_unlock();
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int ef4_pm_poweroff(struct device *dev)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
struct ef4_nic *efx = pci_get_drvdata(pci_dev);
|
|
|
|
efx->type->fini(efx);
|
|
|
|
efx->reset_pending = 0;
|
|
|
|
pci_save_state(pci_dev);
|
|
return pci_set_power_state(pci_dev, PCI_D3hot);
|
|
}
|
|
|
|
/* Used for both resume and restore */
|
|
static int ef4_pm_resume(struct device *dev)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
struct ef4_nic *efx = pci_get_drvdata(pci_dev);
|
|
int rc;
|
|
|
|
rc = pci_set_power_state(pci_dev, PCI_D0);
|
|
if (rc)
|
|
return rc;
|
|
pci_restore_state(pci_dev);
|
|
rc = pci_enable_device(pci_dev);
|
|
if (rc)
|
|
return rc;
|
|
pci_set_master(efx->pci_dev);
|
|
rc = efx->type->reset(efx, RESET_TYPE_ALL);
|
|
if (rc)
|
|
return rc;
|
|
rc = efx->type->init(efx);
|
|
if (rc)
|
|
return rc;
|
|
rc = ef4_pm_thaw(dev);
|
|
return rc;
|
|
}
|
|
|
|
static int ef4_pm_suspend(struct device *dev)
|
|
{
|
|
int rc;
|
|
|
|
ef4_pm_freeze(dev);
|
|
rc = ef4_pm_poweroff(dev);
|
|
if (rc)
|
|
ef4_pm_resume(dev);
|
|
return rc;
|
|
}
|
|
|
|
static const struct dev_pm_ops ef4_pm_ops = {
|
|
.suspend = ef4_pm_suspend,
|
|
.resume = ef4_pm_resume,
|
|
.freeze = ef4_pm_freeze,
|
|
.thaw = ef4_pm_thaw,
|
|
.poweroff = ef4_pm_poweroff,
|
|
.restore = ef4_pm_resume,
|
|
};
|
|
|
|
/* A PCI error affecting this device was detected.
|
|
* At this point MMIO and DMA may be disabled.
|
|
* Stop the software path and request a slot reset.
|
|
*/
|
|
static pci_ers_result_t ef4_io_error_detected(struct pci_dev *pdev,
|
|
enum pci_channel_state state)
|
|
{
|
|
pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
|
|
struct ef4_nic *efx = pci_get_drvdata(pdev);
|
|
|
|
if (state == pci_channel_io_perm_failure)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
rtnl_lock();
|
|
|
|
if (efx->state != STATE_DISABLED) {
|
|
efx->state = STATE_RECOVERY;
|
|
efx->reset_pending = 0;
|
|
|
|
ef4_device_detach_sync(efx);
|
|
|
|
ef4_stop_all(efx);
|
|
ef4_disable_interrupts(efx);
|
|
|
|
status = PCI_ERS_RESULT_NEED_RESET;
|
|
} else {
|
|
/* If the interface is disabled we don't want to do anything
|
|
* with it.
|
|
*/
|
|
status = PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
rtnl_unlock();
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* Fake a successful reset, which will be performed later in ef4_io_resume. */
|
|
static pci_ers_result_t ef4_io_slot_reset(struct pci_dev *pdev)
|
|
{
|
|
struct ef4_nic *efx = pci_get_drvdata(pdev);
|
|
pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
|
|
int rc;
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
netif_err(efx, hw, efx->net_dev,
|
|
"Cannot re-enable PCI device after reset.\n");
|
|
status = PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
|
|
rc = pci_cleanup_aer_uncorrect_error_status(pdev);
|
|
if (rc) {
|
|
netif_err(efx, hw, efx->net_dev,
|
|
"pci_cleanup_aer_uncorrect_error_status failed (%d)\n", rc);
|
|
/* Non-fatal error. Continue. */
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/* Perform the actual reset and resume I/O operations. */
|
|
static void ef4_io_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ef4_nic *efx = pci_get_drvdata(pdev);
|
|
int rc;
|
|
|
|
rtnl_lock();
|
|
|
|
if (efx->state == STATE_DISABLED)
|
|
goto out;
|
|
|
|
rc = ef4_reset(efx, RESET_TYPE_ALL);
|
|
if (rc) {
|
|
netif_err(efx, hw, efx->net_dev,
|
|
"ef4_reset failed after PCI error (%d)\n", rc);
|
|
} else {
|
|
efx->state = STATE_READY;
|
|
netif_dbg(efx, hw, efx->net_dev,
|
|
"Done resetting and resuming IO after PCI error.\n");
|
|
}
|
|
|
|
out:
|
|
rtnl_unlock();
|
|
}
|
|
|
|
/* For simplicity and reliability, we always require a slot reset and try to
|
|
* reset the hardware when a pci error affecting the device is detected.
|
|
* We leave both the link_reset and mmio_enabled callback unimplemented:
|
|
* with our request for slot reset the mmio_enabled callback will never be
|
|
* called, and the link_reset callback is not used by AER or EEH mechanisms.
|
|
*/
|
|
static const struct pci_error_handlers ef4_err_handlers = {
|
|
.error_detected = ef4_io_error_detected,
|
|
.slot_reset = ef4_io_slot_reset,
|
|
.resume = ef4_io_resume,
|
|
};
|
|
|
|
static struct pci_driver ef4_pci_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = ef4_pci_table,
|
|
.probe = ef4_pci_probe,
|
|
.remove = ef4_pci_remove,
|
|
.driver.pm = &ef4_pm_ops,
|
|
.err_handler = &ef4_err_handlers,
|
|
};
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Kernel module interface
|
|
*
|
|
*************************************************************************/
|
|
|
|
module_param(interrupt_mode, uint, 0444);
|
|
MODULE_PARM_DESC(interrupt_mode,
|
|
"Interrupt mode (0=>MSIX 1=>MSI 2=>legacy)");
|
|
|
|
static int __init ef4_init_module(void)
|
|
{
|
|
int rc;
|
|
|
|
printk(KERN_INFO "Solarflare Falcon driver v" EF4_DRIVER_VERSION "\n");
|
|
|
|
rc = register_netdevice_notifier(&ef4_netdev_notifier);
|
|
if (rc)
|
|
goto err_notifier;
|
|
|
|
reset_workqueue = create_singlethread_workqueue("sfc_reset");
|
|
if (!reset_workqueue) {
|
|
rc = -ENOMEM;
|
|
goto err_reset;
|
|
}
|
|
|
|
rc = pci_register_driver(&ef4_pci_driver);
|
|
if (rc < 0)
|
|
goto err_pci;
|
|
|
|
return 0;
|
|
|
|
err_pci:
|
|
destroy_workqueue(reset_workqueue);
|
|
err_reset:
|
|
unregister_netdevice_notifier(&ef4_netdev_notifier);
|
|
err_notifier:
|
|
return rc;
|
|
}
|
|
|
|
static void __exit ef4_exit_module(void)
|
|
{
|
|
printk(KERN_INFO "Solarflare Falcon driver unloading\n");
|
|
|
|
pci_unregister_driver(&ef4_pci_driver);
|
|
destroy_workqueue(reset_workqueue);
|
|
unregister_netdevice_notifier(&ef4_netdev_notifier);
|
|
|
|
}
|
|
|
|
module_init(ef4_init_module);
|
|
module_exit(ef4_exit_module);
|
|
|
|
MODULE_AUTHOR("Solarflare Communications and "
|
|
"Michael Brown <mbrown@fensystems.co.uk>");
|
|
MODULE_DESCRIPTION("Solarflare Falcon network driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, ef4_pci_table);
|
|
MODULE_VERSION(EF4_DRIVER_VERSION);
|