linux_dsm_epyc7002/drivers/net/ethernet/cadence/at91_ether.c
Havard Skinnemoen 55054a16a5 net/macb: clean up ring buffer logic
Instead of masking head and tail every time we increment them, just let them
wrap through UINT_MAX and mask them when subscripting. Add simple accessor
functions to do the subscripting properly to minimize the chances of messing
this up.

This makes the code slightly smaller, and hopefully faster as well.  Also,
doing the ring buffer management this way will simplify things a lot when
making the ring sizes configurable in the future.

Available number of descriptors in ring buffer function by David Laight.

Signed-off-by: Havard Skinnemoen <havard@skinnemoen.net>
[nicolas.ferre@atmel.com: split patch in topics, adapt to newer kernel]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 11:45:58 -04:00

625 lines
16 KiB
C

/*
* Ethernet driver for the Atmel AT91RM9200 (Thunder)
*
* Copyright (C) 2003 SAN People (Pty) Ltd
*
* Based on an earlier Atmel EMAC macrocell driver by Atmel and Lineo Inc.
* Initial version by Rick Bronson 01/11/2003
*
* Intel LXT971A PHY support by Christopher Bahns & David Knickerbocker
* (Polaroid Corporation)
*
* Realtek RTL8201(B)L PHY support by Roman Avramenko <roman@imsystems.ru>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/dma-mapping.h>
#include <linux/ethtool.h>
#include <linux/platform_data/macb.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gfp.h>
#include <linux/phy.h>
#include <linux/io.h>
#include "macb.h"
#define DRV_NAME "at91_ether"
#define DRV_VERSION "1.0"
/* 1518 rounded up */
#define MAX_RBUFF_SZ 0x600
/* max number of receive buffers */
#define MAX_RX_DESCR 9
/* ......................... ADDRESS MANAGEMENT ........................ */
/*
* NOTE: Your bootloader must always set the MAC address correctly before
* booting into Linux.
*
* - It must always set the MAC address after reset, even if it doesn't
* happen to access the Ethernet while it's booting. Some versions of
* U-Boot on the AT91RM9200-DK do not do this.
*
* - Likewise it must store the addresses in the correct byte order.
* MicroMonitor (uMon) on the CSB337 does this incorrectly (and
* continues to do so, for bug-compatibility).
*/
static short __init unpack_mac_address(struct net_device *dev, unsigned int hi, unsigned int lo)
{
struct macb *lp = netdev_priv(dev);
char addr[6];
if (lp->board_data.rev_eth_addr) {
addr[5] = (lo & 0xff); /* The CSB337 bootloader stores the MAC the wrong-way around */
addr[4] = (lo & 0xff00) >> 8;
addr[3] = (lo & 0xff0000) >> 16;
addr[2] = (lo & 0xff000000) >> 24;
addr[1] = (hi & 0xff);
addr[0] = (hi & 0xff00) >> 8;
}
else {
addr[0] = (lo & 0xff);
addr[1] = (lo & 0xff00) >> 8;
addr[2] = (lo & 0xff0000) >> 16;
addr[3] = (lo & 0xff000000) >> 24;
addr[4] = (hi & 0xff);
addr[5] = (hi & 0xff00) >> 8;
}
if (is_valid_ether_addr(addr)) {
memcpy(dev->dev_addr, &addr, 6);
return 1;
}
return 0;
}
/*
* Set the ethernet MAC address in dev->dev_addr
*/
static void __init get_mac_address(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
/* Check Specific-Address 1 */
if (unpack_mac_address(dev, macb_readl(lp, SA1T), macb_readl(lp, SA1B)))
return;
/* Check Specific-Address 2 */
if (unpack_mac_address(dev, macb_readl(lp, SA2T), macb_readl(lp, SA2B)))
return;
/* Check Specific-Address 3 */
if (unpack_mac_address(dev, macb_readl(lp, SA3T), macb_readl(lp, SA3B)))
return;
/* Check Specific-Address 4 */
if (unpack_mac_address(dev, macb_readl(lp, SA4T), macb_readl(lp, SA4B)))
return;
printk(KERN_ERR "at91_ether: Your bootloader did not configure a MAC address.\n");
}
/*
* Program the hardware MAC address from dev->dev_addr.
*/
static void update_mac_address(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
macb_writel(lp, SA1B, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16)
| (dev->dev_addr[1] << 8) | (dev->dev_addr[0]));
macb_writel(lp, SA1T, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
macb_writel(lp, SA2B, 0);
macb_writel(lp, SA2T, 0);
}
/*
* Store the new hardware address in dev->dev_addr, and update the MAC.
*/
static int set_mac_address(struct net_device *dev, void* addr)
{
struct sockaddr *address = addr;
if (!is_valid_ether_addr(address->sa_data))
return -EADDRNOTAVAIL;
memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
update_mac_address(dev);
printk("%s: Setting MAC address to %pM\n", dev->name,
dev->dev_addr);
return 0;
}
/* ................................ MAC ................................ */
/*
* Initialize and start the Receiver and Transmit subsystems
*/
static int at91ether_start(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
unsigned long ctl;
dma_addr_t addr;
int i;
lp->rx_ring = dma_alloc_coherent(&lp->pdev->dev,
MAX_RX_DESCR * sizeof(struct macb_dma_desc),
&lp->rx_ring_dma, GFP_KERNEL);
if (!lp->rx_ring) {
netdev_err(lp->dev, "unable to alloc rx ring DMA buffer\n");
return -ENOMEM;
}
lp->rx_buffers = dma_alloc_coherent(&lp->pdev->dev,
MAX_RX_DESCR * MAX_RBUFF_SZ,
&lp->rx_buffers_dma, GFP_KERNEL);
if (!lp->rx_buffers) {
netdev_err(lp->dev, "unable to alloc rx data DMA buffer\n");
dma_free_coherent(&lp->pdev->dev,
MAX_RX_DESCR * sizeof(struct macb_dma_desc),
lp->rx_ring, lp->rx_ring_dma);
lp->rx_ring = NULL;
return -ENOMEM;
}
addr = lp->rx_buffers_dma;
for (i = 0; i < MAX_RX_DESCR; i++) {
lp->rx_ring[i].addr = addr;
lp->rx_ring[i].ctrl = 0;
addr += MAX_RBUFF_SZ;
}
/* Set the Wrap bit on the last descriptor */
lp->rx_ring[MAX_RX_DESCR - 1].addr |= MACB_BIT(RX_WRAP);
/* Reset buffer index */
lp->rx_tail = 0;
/* Program address of descriptor list in Rx Buffer Queue register */
macb_writel(lp, RBQP, lp->rx_ring_dma);
/* Enable Receive and Transmit */
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl | MACB_BIT(RE) | MACB_BIT(TE));
return 0;
}
/*
* Open the ethernet interface
*/
static int at91ether_open(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
unsigned long ctl;
int ret;
if (!is_valid_ether_addr(dev->dev_addr))
return -EADDRNOTAVAIL;
/* Clear internal statistics */
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl | MACB_BIT(CLRSTAT));
/* Update the MAC address (incase user has changed it) */
update_mac_address(dev);
ret = at91ether_start(dev);
if (ret)
return ret;
/* Enable MAC interrupts */
macb_writel(lp, IER, MACB_BIT(RCOMP) | MACB_BIT(RXUBR)
| MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE) | MACB_BIT(TCOMP)
| MACB_BIT(ISR_ROVR) | MACB_BIT(HRESP));
/* schedule a link state check */
phy_start(lp->phy_dev);
netif_start_queue(dev);
return 0;
}
/*
* Close the interface
*/
static int at91ether_close(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
unsigned long ctl;
/* Disable Receiver and Transmitter */
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE)));
/* Disable MAC interrupts */
macb_writel(lp, IDR, MACB_BIT(RCOMP) | MACB_BIT(RXUBR)
| MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE)
| MACB_BIT(TCOMP) | MACB_BIT(ISR_ROVR)
| MACB_BIT(HRESP));
netif_stop_queue(dev);
dma_free_coherent(&lp->pdev->dev,
MAX_RX_DESCR * sizeof(struct macb_dma_desc),
lp->rx_ring, lp->rx_ring_dma);
lp->rx_ring = NULL;
dma_free_coherent(&lp->pdev->dev,
MAX_RX_DESCR * MAX_RBUFF_SZ,
lp->rx_buffers, lp->rx_buffers_dma);
lp->rx_buffers = NULL;
return 0;
}
/*
* Transmit packet.
*/
static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
if (macb_readl(lp, TSR) & MACB_BIT(RM9200_BNQ)) {
netif_stop_queue(dev);
/* Store packet information (to free when Tx completed) */
lp->skb = skb;
lp->skb_length = skb->len;
lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
dev->stats.tx_bytes += skb->len;
/* Set address of the data in the Transmit Address register */
macb_writel(lp, TAR, lp->skb_physaddr);
/* Set length of the packet in the Transmit Control register */
macb_writel(lp, TCR, skb->len);
} else {
printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n");
return NETDEV_TX_BUSY; /* if we return anything but zero, dev.c:1055 calls kfree_skb(skb)
on this skb, he also reports -ENETDOWN and printk's, so either
we free and return(0) or don't free and return 1 */
}
return NETDEV_TX_OK;
}
/*
* Update the current statistics from the internal statistics registers.
*/
static struct net_device_stats *at91ether_stats(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
int ale, lenerr, seqe, lcol, ecol;
if (netif_running(dev)) {
dev->stats.rx_packets += macb_readl(lp, FRO); /* Good frames received */
ale = macb_readl(lp, ALE);
dev->stats.rx_frame_errors += ale; /* Alignment errors */
lenerr = macb_readl(lp, ELE) + macb_readl(lp, USF);
dev->stats.rx_length_errors += lenerr; /* Excessive Length or Undersize Frame error */
seqe = macb_readl(lp, FCSE);
dev->stats.rx_crc_errors += seqe; /* CRC error */
dev->stats.rx_fifo_errors += macb_readl(lp, RRE);/* Receive buffer not available */
dev->stats.rx_errors += (ale + lenerr + seqe
+ macb_readl(lp, RSE) + macb_readl(lp, RJA));
dev->stats.tx_packets += macb_readl(lp, FTO); /* Frames successfully transmitted */
dev->stats.tx_fifo_errors += macb_readl(lp, TUND); /* Transmit FIFO underruns */
dev->stats.tx_carrier_errors += macb_readl(lp, CSE); /* Carrier Sense errors */
dev->stats.tx_heartbeat_errors += macb_readl(lp, STE);/* Heartbeat error */
lcol = macb_readl(lp, LCOL);
ecol = macb_readl(lp, EXCOL);
dev->stats.tx_window_errors += lcol; /* Late collisions */
dev->stats.tx_aborted_errors += ecol; /* 16 collisions */
dev->stats.collisions += (macb_readl(lp, SCF) + macb_readl(lp, MCF) + lcol + ecol);
}
return &dev->stats;
}
/*
* Extract received frame from buffer descriptors and sent to upper layers.
* (Called from interrupt context)
*/
static void at91ether_rx(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
unsigned char *p_recv;
struct sk_buff *skb;
unsigned int pktlen;
while (lp->rx_ring[lp->rx_tail].addr & MACB_BIT(RX_USED)) {
p_recv = lp->rx_buffers + lp->rx_tail * MAX_RBUFF_SZ;
pktlen = MACB_BF(RX_FRMLEN, lp->rx_ring[lp->rx_tail].ctrl);
skb = netdev_alloc_skb(dev, pktlen + 2);
if (skb) {
skb_reserve(skb, 2);
memcpy(skb_put(skb, pktlen), p_recv, pktlen);
skb->protocol = eth_type_trans(skb, dev);
dev->stats.rx_bytes += pktlen;
netif_rx(skb);
} else {
dev->stats.rx_dropped += 1;
netdev_notice(dev, "Memory squeeze, dropping packet.\n");
}
if (lp->rx_ring[lp->rx_tail].ctrl & MACB_BIT(RX_MHASH_MATCH))
dev->stats.multicast++;
/* reset ownership bit */
lp->rx_ring[lp->rx_tail].addr &= ~MACB_BIT(RX_USED);
/* wrap after last buffer */
if (lp->rx_tail == MAX_RX_DESCR - 1)
lp->rx_tail = 0;
else
lp->rx_tail++;
}
}
/*
* MAC interrupt handler
*/
static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
struct macb *lp = netdev_priv(dev);
unsigned long intstatus, ctl;
/* MAC Interrupt Status register indicates what interrupts are pending.
It is automatically cleared once read. */
intstatus = macb_readl(lp, ISR);
if (intstatus & MACB_BIT(RCOMP)) /* Receive complete */
at91ether_rx(dev);
if (intstatus & MACB_BIT(TCOMP)) { /* Transmit complete */
/* The TCOM bit is set even if the transmission failed. */
if (intstatus & (MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE)))
dev->stats.tx_errors += 1;
if (lp->skb) {
dev_kfree_skb_irq(lp->skb);
lp->skb = NULL;
dma_unmap_single(NULL, lp->skb_physaddr, lp->skb_length, DMA_TO_DEVICE);
}
netif_wake_queue(dev);
}
/* Work-around for Errata #11 */
if (intstatus & MACB_BIT(RXUBR)) {
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl & ~MACB_BIT(RE));
macb_writel(lp, NCR, ctl | MACB_BIT(RE));
}
if (intstatus & MACB_BIT(ISR_ROVR))
printk("%s: ROVR error\n", dev->name);
return IRQ_HANDLED;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
static void at91ether_poll_controller(struct net_device *dev)
{
unsigned long flags;
local_irq_save(flags);
at91ether_interrupt(dev->irq, dev);
local_irq_restore(flags);
}
#endif
static const struct net_device_ops at91ether_netdev_ops = {
.ndo_open = at91ether_open,
.ndo_stop = at91ether_close,
.ndo_start_xmit = at91ether_start_xmit,
.ndo_get_stats = at91ether_stats,
.ndo_set_rx_mode = macb_set_rx_mode,
.ndo_set_mac_address = set_mac_address,
.ndo_do_ioctl = macb_ioctl,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = at91ether_poll_controller,
#endif
};
/*
* Detect MAC & PHY and perform ethernet interface initialization
*/
static int __init at91ether_probe(struct platform_device *pdev)
{
struct macb_platform_data *board_data = pdev->dev.platform_data;
struct resource *regs;
struct net_device *dev;
struct phy_device *phydev;
struct macb *lp;
int res;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs)
return -ENOENT;
dev = alloc_etherdev(sizeof(struct macb));
if (!dev)
return -ENOMEM;
lp = netdev_priv(dev);
lp->pdev = pdev;
lp->dev = dev;
lp->board_data = *board_data;
spin_lock_init(&lp->lock);
dev->base_addr = regs->start; /* physical base address */
lp->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
if (!lp->regs) {
res = -ENOMEM;
goto err_free_dev;
}
/* Clock */
lp->pclk = devm_clk_get(&pdev->dev, "ether_clk");
if (IS_ERR(lp->pclk)) {
res = PTR_ERR(lp->pclk);
goto err_free_dev;
}
clk_enable(lp->pclk);
/* Install the interrupt handler */
dev->irq = platform_get_irq(pdev, 0);
res = devm_request_irq(&pdev->dev, dev->irq, at91ether_interrupt, 0, dev->name, dev);
if (res)
goto err_disable_clock;
ether_setup(dev);
dev->netdev_ops = &at91ether_netdev_ops;
dev->ethtool_ops = &macb_ethtool_ops;
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */
update_mac_address(dev); /* Program ethernet address into MAC */
macb_writel(lp, NCR, 0);
if (board_data->is_rmii) {
macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG) | MACB_BIT(RM9200_RMII));
lp->phy_interface = PHY_INTERFACE_MODE_RMII;
} else {
macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG));
lp->phy_interface = PHY_INTERFACE_MODE_MII;
}
/* Register the network interface */
res = register_netdev(dev);
if (res)
goto err_disable_clock;
if (macb_mii_init(lp) != 0)
goto err_out_unregister_netdev;
netif_carrier_off(dev); /* will be enabled in open() */
phydev = lp->phy_dev;
netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
/* Display ethernet banner */
printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n",
dev->name, (uint) dev->base_addr, dev->irq,
macb_readl(lp, NCFGR) & MACB_BIT(SPD) ? "100-" : "10-",
macb_readl(lp, NCFGR) & MACB_BIT(FD) ? "FullDuplex" : "HalfDuplex",
dev->dev_addr);
return 0;
err_out_unregister_netdev:
unregister_netdev(dev);
err_disable_clock:
clk_disable(lp->pclk);
err_free_dev:
free_netdev(dev);
return res;
}
static int __devexit at91ether_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct macb *lp = netdev_priv(dev);
if (lp->phy_dev)
phy_disconnect(lp->phy_dev);
mdiobus_unregister(lp->mii_bus);
kfree(lp->mii_bus->irq);
mdiobus_free(lp->mii_bus);
unregister_netdev(dev);
clk_disable(lp->pclk);
free_netdev(dev);
platform_set_drvdata(pdev, NULL);
return 0;
}
#ifdef CONFIG_PM
static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
{
struct net_device *net_dev = platform_get_drvdata(pdev);
struct macb *lp = netdev_priv(net_dev);
if (netif_running(net_dev)) {
netif_stop_queue(net_dev);
netif_device_detach(net_dev);
clk_disable(lp->pclk);
}
return 0;
}
static int at91ether_resume(struct platform_device *pdev)
{
struct net_device *net_dev = platform_get_drvdata(pdev);
struct macb *lp = netdev_priv(net_dev);
if (netif_running(net_dev)) {
clk_enable(lp->pclk);
netif_device_attach(net_dev);
netif_start_queue(net_dev);
}
return 0;
}
#else
#define at91ether_suspend NULL
#define at91ether_resume NULL
#endif
static struct platform_driver at91ether_driver = {
.remove = __devexit_p(at91ether_remove),
.suspend = at91ether_suspend,
.resume = at91ether_resume,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
};
static int __init at91ether_init(void)
{
return platform_driver_probe(&at91ether_driver, at91ether_probe);
}
static void __exit at91ether_exit(void)
{
platform_driver_unregister(&at91ether_driver);
}
module_init(at91ether_init)
module_exit(at91ether_exit)
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
MODULE_AUTHOR("Andrew Victor");
MODULE_ALIAS("platform:" DRV_NAME);