AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-21 00:39:33 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
7ecf6d8ff1
linux_dsm_epyc7002/drivers/nfc/pn533/pn533.h
Andrey Rusalin 32ecc75ded NFC: pn533: change order operations in dev registation 
Sometimes during probing and registration of pn533_i2c
NULL pointer dereference happens.
Reproduced in cycle of inserting and removing pn533_i2c
and pn533 modules.

Backtrace:
[<8004205c>] (__queue_work) from [<80042324>] (queue_work_on+0x50/0x5c)
r10:acdc7c80 r9:8006b330 r8:ac0dfb40 r7:ac50c600 r6:00000004 r5:acbbee40 r4:600f0113
[<800422d4>] (queue_work_on) from [<7f7d5b6c>] (pn533_recv_frame+0x158/0x1fc [pn533])
r7:ffffff87 r6:00000000 r5:acbbee40 r4:acbbee00
[<7f7d5a14>] (pn533_recv_frame [pn533]) from [<7f7df4b8>] (pn533_i2c_irq_thread_fn+0x184/0x)
r6:acb2a000 r5:00000000 r4:acdc7b90
[<7f7df334>] (pn533_i2c_irq_thread_fn [pn533_i2c]) from [<8006b354>] (irq_thread_fn+0x24/0x)
r7:00000000 r6:accde000 r5:ac0dfb40 r4:acdc7c80
...

Seems there is some race condition due registration of
irq handler until all data stuctures that could be needed
are ready. So I re-ordered some ops. After this, problem has gone.

Changes in USB part was not tested, but it should not break
anything.

Signed-off-by: Andrey Rusalin <arusalin@dev.rtsoft.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02 01:06:23 +02:00

240 lines
6.5 KiB
C
Raw Blame History

/*
* Driver for NXP PN533 NFC Chip
*
* Copyright (C) 2011 Instituto Nokia de Tecnologia
* Copyright (C) 2012-2013 Tieto Poland
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#define PN533_DEVICE_STD 0x1
#define PN533_DEVICE_PASORI 0x2
#define PN533_DEVICE_ACR122U 0x3
#define PN533_DEVICE_PN532 0x4
#define PN533_ALL_PROTOCOLS (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK |\
NFC_PROTO_FELICA_MASK | NFC_PROTO_ISO14443_MASK |\
NFC_PROTO_NFC_DEP_MASK |\
NFC_PROTO_ISO14443_B_MASK)
#define PN533_NO_TYPE_B_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \
NFC_PROTO_MIFARE_MASK | \
NFC_PROTO_FELICA_MASK | \
NFC_PROTO_ISO14443_MASK | \
NFC_PROTO_NFC_DEP_MASK)
/* Standard pn533 frame definitions (standard and extended)*/
#define PN533_STD_FRAME_HEADER_LEN (sizeof(struct pn533_std_frame) \
+ 2) /* data[0] TFI, data[1] CC */
#define PN533_STD_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/
#define PN533_EXT_FRAME_HEADER_LEN (sizeof(struct pn533_ext_frame) \
+ 2) /* data[0] TFI, data[1] CC */
#define PN533_CMD_DATAEXCH_HEAD_LEN 1
#define PN533_CMD_DATAEXCH_DATA_MAXLEN 262
#define PN533_CMD_DATAFRAME_MAXLEN 240 /* max data length (send) */
/*
* Max extended frame payload len, excluding TFI and CC
* which are already in PN533_FRAME_HEADER_LEN.
*/
#define PN533_STD_FRAME_MAX_PAYLOAD_LEN 263
/* Preamble (1), SoPC (2), ACK Code (2), Postamble (1) */
#define PN533_STD_FRAME_ACK_SIZE 6
#define PN533_STD_FRAME_CHECKSUM(f) (f->data[f->datalen])
#define PN533_STD_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1])
/* Half start code (3), LEN (4) should be 0xffff for extended frame */
#define PN533_STD_IS_EXTENDED(hdr) ((hdr)->datalen == 0xFF \
&& (hdr)->datalen_checksum == 0xFF)
#define PN533_EXT_FRAME_CHECKSUM(f) (f->data[be16_to_cpu(f->datalen)])
/* start of frame */
#define PN533_STD_FRAME_SOF 0x00FF
/* standard frame identifier: in/out/error */
#define PN533_STD_FRAME_IDENTIFIER(f) (f->data[0]) /* TFI */
#define PN533_STD_FRAME_DIR_OUT 0xD4
#define PN533_STD_FRAME_DIR_IN 0xD5
/* PN533 Commands */
#define PN533_FRAME_CMD(f) (f->data[1])
#define PN533_CMD_GET_FIRMWARE_VERSION 0x02
#define PN533_CMD_SAM_CONFIGURATION 0x14
#define PN533_CMD_RF_CONFIGURATION 0x32
#define PN533_CMD_IN_DATA_EXCHANGE 0x40
#define PN533_CMD_IN_COMM_THRU 0x42
#define PN533_CMD_IN_LIST_PASSIVE_TARGET 0x4A
#define PN533_CMD_IN_ATR 0x50
#define PN533_CMD_IN_RELEASE 0x52
#define PN533_CMD_IN_JUMP_FOR_DEP 0x56
#define PN533_CMD_TG_INIT_AS_TARGET 0x8c
#define PN533_CMD_TG_GET_DATA 0x86
#define PN533_CMD_TG_SET_DATA 0x8e
#define PN533_CMD_TG_SET_META_DATA 0x94
#define PN533_CMD_UNDEF 0xff
#define PN533_CMD_RESPONSE(cmd) (cmd + 1)
/* PN533 Return codes */
#define PN533_CMD_RET_MASK 0x3F
#define PN533_CMD_MI_MASK 0x40
#define PN533_CMD_RET_SUCCESS 0x00
enum pn533_protocol_type {
PN533_PROTO_REQ_ACK_RESP = 0,
PN533_PROTO_REQ_RESP
};
/* Poll modulations */
enum {
PN533_POLL_MOD_106KBPS_A,
PN533_POLL_MOD_212KBPS_FELICA,
PN533_POLL_MOD_424KBPS_FELICA,
PN533_POLL_MOD_106KBPS_JEWEL,
PN533_POLL_MOD_847KBPS_B,
PN533_LISTEN_MOD,
__PN533_POLL_MOD_AFTER_LAST,
};
#define PN533_POLL_MOD_MAX (__PN533_POLL_MOD_AFTER_LAST - 1)
struct pn533_std_frame {
u8 preamble;
__be16 start_frame;
u8 datalen;
u8 datalen_checksum;
u8 data[];
} __packed;
struct pn533_ext_frame { /* Extended Information frame */
u8 preamble;
__be16 start_frame;
__be16 eif_flag; /* fixed to 0xFFFF */
__be16 datalen;
u8 datalen_checksum;
u8 data[];
} __packed;
struct pn533 {
struct nfc_dev *nfc_dev;
u32 device_type;
enum pn533_protocol_type protocol_type;
struct sk_buff_head resp_q;
struct sk_buff_head fragment_skb;
struct workqueue_struct *wq;
struct work_struct cmd_work;
struct work_struct cmd_complete_work;
struct delayed_work poll_work;
struct work_struct mi_rx_work;
struct work_struct mi_tx_work;
struct work_struct mi_tm_rx_work;
struct work_struct mi_tm_tx_work;
struct work_struct tg_work;
struct work_struct rf_work;
struct list_head cmd_queue;
struct pn533_cmd *cmd;
u8 cmd_pending;
struct mutex cmd_lock; /* protects cmd queue */
void *cmd_complete_mi_arg;
void *cmd_complete_dep_arg;
struct pn533_poll_modulations *poll_mod_active[PN533_POLL_MOD_MAX + 1];
u8 poll_mod_count;
u8 poll_mod_curr;
u8 poll_dep;
u32 poll_protocols;
u32 listen_protocols;
struct timer_list listen_timer;
int cancel_listen;
u8 *gb;
size_t gb_len;
u8 tgt_available_prots;
u8 tgt_active_prot;
u8 tgt_mode;
struct pn533_frame_ops *ops;
struct device *dev;
void *phy;
struct pn533_phy_ops *phy_ops;
};
typedef int (*pn533_send_async_complete_t) (struct pn533 *dev, void *arg,
struct sk_buff *resp);
struct pn533_cmd {
struct list_head queue;
u8 code;
int status;
struct sk_buff *req;
struct sk_buff *resp;
pn533_send_async_complete_t complete_cb;
void *complete_cb_context;
};
struct pn533_frame_ops {
void (*tx_frame_init)(void *frame, u8 cmd_code);
void (*tx_frame_finish)(void *frame);
void (*tx_update_payload_len)(void *frame, int len);
int tx_header_len;
int tx_tail_len;
bool (*rx_is_frame_valid)(void *frame, struct pn533 *dev);
bool (*rx_frame_is_ack)(void *frame);
int (*rx_frame_size)(void *frame);
int rx_header_len;
int rx_tail_len;
int max_payload_len;
u8 (*get_cmd_code)(void *frame);
};
struct pn533_phy_ops {
int (*send_frame)(struct pn533 *priv,
struct sk_buff *out);
int (*send_ack)(struct pn533 *dev, gfp_t flags);
void (*abort_cmd)(struct pn533 *priv, gfp_t flags);
};
struct pn533 *pn533_register_device(u32 device_type,
u32 protocols,
enum pn533_protocol_type protocol_type,
void *phy,
struct pn533_phy_ops *phy_ops,
struct pn533_frame_ops *fops,
struct device *dev,
struct device *parent);
int pn533_finalize_setup(struct pn533 *dev);
void pn533_unregister_device(struct pn533 *priv);
void pn533_recv_frame(struct pn533 *dev, struct sk_buff *skb, int status);
bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame);
bool pn533_rx_frame_is_ack(void *_frame);
Reference in New Issue View Git Blame Copy Permalink