mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 11:46:54 +07:00
1020 lines
23 KiB
C
1020 lines
23 KiB
C
/*
|
|
* wm0010.c -- WM0010 DSP Driver
|
|
*
|
|
* Copyright 2012 Wolfson Microelectronics PLC.
|
|
*
|
|
* Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
* Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
|
|
* Scott Ling <sl@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqreturn.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <sound/soc.h>
|
|
#include <sound/wm0010.h>
|
|
|
|
#define DEVICE_ID_WM0010 10
|
|
|
|
/* We only support v1 of the .dfw INFO record */
|
|
#define INFO_VERSION 1
|
|
|
|
enum dfw_cmd {
|
|
DFW_CMD_FUSE = 0x01,
|
|
DFW_CMD_CODE_HDR,
|
|
DFW_CMD_CODE_DATA,
|
|
DFW_CMD_PLL,
|
|
DFW_CMD_INFO = 0xff
|
|
};
|
|
|
|
struct dfw_binrec {
|
|
u8 command;
|
|
u32 length:24;
|
|
u32 address;
|
|
uint8_t data[0];
|
|
} __packed;
|
|
|
|
struct dfw_inforec {
|
|
u8 info_version;
|
|
u8 tool_major_version;
|
|
u8 tool_minor_version;
|
|
u8 dsp_target;
|
|
};
|
|
|
|
struct dfw_pllrec {
|
|
u8 command;
|
|
u32 length:24;
|
|
u32 address;
|
|
u32 clkctrl1;
|
|
u32 clkctrl2;
|
|
u32 clkctrl3;
|
|
u32 ldetctrl;
|
|
u32 uart_div;
|
|
u32 spi_div;
|
|
} __packed;
|
|
|
|
static struct pll_clock_map {
|
|
int max_sysclk;
|
|
int max_pll_spi_speed;
|
|
u32 pll_clkctrl1;
|
|
} pll_clock_map[] = { /* Dividers */
|
|
{ 22000000, 26000000, 0x00201f11 }, /* 2,32,2 */
|
|
{ 18000000, 26000000, 0x00203f21 }, /* 2,64,4 */
|
|
{ 14000000, 26000000, 0x00202620 }, /* 1,39,4 */
|
|
{ 10000000, 22000000, 0x00203120 }, /* 1,50,4 */
|
|
{ 6500000, 22000000, 0x00204520 }, /* 1,70,4 */
|
|
{ 5500000, 22000000, 0x00103f10 }, /* 1,64,2 */
|
|
};
|
|
|
|
enum wm0010_state {
|
|
WM0010_POWER_OFF,
|
|
WM0010_OUT_OF_RESET,
|
|
WM0010_BOOTROM,
|
|
WM0010_STAGE2,
|
|
WM0010_FIRMWARE,
|
|
};
|
|
|
|
struct wm0010_priv {
|
|
struct snd_soc_codec *codec;
|
|
|
|
struct mutex lock;
|
|
struct device *dev;
|
|
|
|
struct wm0010_pdata pdata;
|
|
|
|
int gpio_reset;
|
|
int gpio_reset_value;
|
|
|
|
struct regulator_bulk_data core_supplies[2];
|
|
struct regulator *dbvdd;
|
|
|
|
int sysclk;
|
|
|
|
enum wm0010_state state;
|
|
bool boot_failed;
|
|
bool ready;
|
|
bool pll_running;
|
|
int max_spi_freq;
|
|
int board_max_spi_speed;
|
|
u32 pll_clkctrl1;
|
|
|
|
spinlock_t irq_lock;
|
|
int irq;
|
|
|
|
struct completion boot_completion;
|
|
};
|
|
|
|
struct wm0010_spi_msg {
|
|
struct spi_message m;
|
|
struct spi_transfer t;
|
|
u8 *tx_buf;
|
|
u8 *rx_buf;
|
|
size_t len;
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm0010_dapm_widgets[] = {
|
|
SND_SOC_DAPM_SUPPLY("CLKIN", SND_SOC_NOPM, 0, 0, NULL, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm0010_dapm_routes[] = {
|
|
{ "SDI2 Capture", NULL, "SDI1 Playback" },
|
|
{ "SDI1 Capture", NULL, "SDI2 Playback" },
|
|
|
|
{ "SDI1 Capture", NULL, "CLKIN" },
|
|
{ "SDI2 Capture", NULL, "CLKIN" },
|
|
{ "SDI1 Playback", NULL, "CLKIN" },
|
|
{ "SDI2 Playback", NULL, "CLKIN" },
|
|
};
|
|
|
|
static const char *wm0010_state_to_str(enum wm0010_state state)
|
|
{
|
|
static const char * const state_to_str[] = {
|
|
"Power off",
|
|
"Out of reset",
|
|
"Boot ROM",
|
|
"Stage2",
|
|
"Firmware"
|
|
};
|
|
|
|
if (state < 0 || state >= ARRAY_SIZE(state_to_str))
|
|
return "null";
|
|
return state_to_str[state];
|
|
}
|
|
|
|
/* Called with wm0010->lock held */
|
|
static void wm0010_halt(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec);
|
|
unsigned long flags;
|
|
enum wm0010_state state;
|
|
|
|
/* Fetch the wm0010 state */
|
|
spin_lock_irqsave(&wm0010->irq_lock, flags);
|
|
state = wm0010->state;
|
|
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
|
|
|
|
switch (state) {
|
|
case WM0010_POWER_OFF:
|
|
/* If there's nothing to do, bail out */
|
|
return;
|
|
case WM0010_OUT_OF_RESET:
|
|
case WM0010_BOOTROM:
|
|
case WM0010_STAGE2:
|
|
case WM0010_FIRMWARE:
|
|
/* Remember to put chip back into reset */
|
|
gpio_set_value_cansleep(wm0010->gpio_reset,
|
|
wm0010->gpio_reset_value);
|
|
/* Disable the regulators */
|
|
regulator_disable(wm0010->dbvdd);
|
|
regulator_bulk_disable(ARRAY_SIZE(wm0010->core_supplies),
|
|
wm0010->core_supplies);
|
|
break;
|
|
}
|
|
|
|
spin_lock_irqsave(&wm0010->irq_lock, flags);
|
|
wm0010->state = WM0010_POWER_OFF;
|
|
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
|
|
}
|
|
|
|
struct wm0010_boot_xfer {
|
|
struct list_head list;
|
|
struct snd_soc_codec *codec;
|
|
struct completion *done;
|
|
struct spi_message m;
|
|
struct spi_transfer t;
|
|
};
|
|
|
|
/* Called with wm0010->lock held */
|
|
static void wm0010_mark_boot_failure(struct wm0010_priv *wm0010)
|
|
{
|
|
enum wm0010_state state;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&wm0010->irq_lock, flags);
|
|
state = wm0010->state;
|
|
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
|
|
|
|
dev_err(wm0010->dev, "Failed to transition from `%s' state to `%s' state\n",
|
|
wm0010_state_to_str(state), wm0010_state_to_str(state + 1));
|
|
|
|
wm0010->boot_failed = true;
|
|
}
|
|
|
|
static void wm0010_boot_xfer_complete(void *data)
|
|
{
|
|
struct wm0010_boot_xfer *xfer = data;
|
|
struct snd_soc_codec *codec = xfer->codec;
|
|
struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec);
|
|
u32 *out32 = xfer->t.rx_buf;
|
|
int i;
|
|
|
|
if (xfer->m.status != 0) {
|
|
dev_err(codec->dev, "SPI transfer failed: %d\n",
|
|
xfer->m.status);
|
|
wm0010_mark_boot_failure(wm0010);
|
|
if (xfer->done)
|
|
complete(xfer->done);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < xfer->t.len / 4; i++) {
|
|
dev_dbg(codec->dev, "%d: %04x\n", i, out32[i]);
|
|
|
|
switch (be32_to_cpu(out32[i])) {
|
|
case 0xe0e0e0e0:
|
|
dev_err(codec->dev,
|
|
"%d: ROM error reported in stage 2\n", i);
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
|
|
case 0x55555555:
|
|
if (wm0010->state < WM0010_STAGE2)
|
|
break;
|
|
dev_err(codec->dev,
|
|
"%d: ROM bootloader running in stage 2\n", i);
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
|
|
case 0x0fed0000:
|
|
dev_dbg(codec->dev, "Stage2 loader running\n");
|
|
break;
|
|
|
|
case 0x0fed0007:
|
|
dev_dbg(codec->dev, "CODE_HDR packet received\n");
|
|
break;
|
|
|
|
case 0x0fed0008:
|
|
dev_dbg(codec->dev, "CODE_DATA packet received\n");
|
|
break;
|
|
|
|
case 0x0fed0009:
|
|
dev_dbg(codec->dev, "Download complete\n");
|
|
break;
|
|
|
|
case 0x0fed000c:
|
|
dev_dbg(codec->dev, "Application start\n");
|
|
break;
|
|
|
|
case 0x0fed000e:
|
|
dev_dbg(codec->dev, "PLL packet received\n");
|
|
wm0010->pll_running = true;
|
|
break;
|
|
|
|
case 0x0fed0025:
|
|
dev_err(codec->dev, "Device reports image too long\n");
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
|
|
case 0x0fed002c:
|
|
dev_err(codec->dev, "Device reports bad SPI packet\n");
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
|
|
case 0x0fed0031:
|
|
dev_err(codec->dev, "Device reports SPI read overflow\n");
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
|
|
case 0x0fed0032:
|
|
dev_err(codec->dev, "Device reports SPI underclock\n");
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
|
|
case 0x0fed0033:
|
|
dev_err(codec->dev, "Device reports bad header packet\n");
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
|
|
case 0x0fed0034:
|
|
dev_err(codec->dev, "Device reports invalid packet type\n");
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
|
|
case 0x0fed0035:
|
|
dev_err(codec->dev, "Device reports data before header error\n");
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
|
|
case 0x0fed0038:
|
|
dev_err(codec->dev, "Device reports invalid PLL packet\n");
|
|
break;
|
|
|
|
case 0x0fed003a:
|
|
dev_err(codec->dev, "Device reports packet alignment error\n");
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
|
|
default:
|
|
dev_err(codec->dev, "Unrecognised return 0x%x\n",
|
|
be32_to_cpu(out32[i]));
|
|
wm0010_mark_boot_failure(wm0010);
|
|
break;
|
|
}
|
|
|
|
if (wm0010->boot_failed)
|
|
break;
|
|
}
|
|
|
|
if (xfer->done)
|
|
complete(xfer->done);
|
|
}
|
|
|
|
static void byte_swap_64(u64 *data_in, u64 *data_out, u32 len)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < len / 8; i++)
|
|
data_out[i] = cpu_to_be64(le64_to_cpu(data_in[i]));
|
|
}
|
|
|
|
static int wm0010_firmware_load(const char *name, struct snd_soc_codec *codec)
|
|
{
|
|
struct spi_device *spi = to_spi_device(codec->dev);
|
|
struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec);
|
|
struct list_head xfer_list;
|
|
struct wm0010_boot_xfer *xfer;
|
|
int ret;
|
|
struct completion done;
|
|
const struct firmware *fw;
|
|
const struct dfw_binrec *rec;
|
|
const struct dfw_inforec *inforec;
|
|
u64 *img;
|
|
u8 *out, dsp;
|
|
u32 len, offset;
|
|
|
|
INIT_LIST_HEAD(&xfer_list);
|
|
|
|
ret = request_firmware(&fw, name, codec->dev);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to request application(%s): %d\n",
|
|
name, ret);
|
|
return ret;
|
|
}
|
|
|
|
rec = (const struct dfw_binrec *)fw->data;
|
|
inforec = (const struct dfw_inforec *)rec->data;
|
|
offset = 0;
|
|
dsp = inforec->dsp_target;
|
|
wm0010->boot_failed = false;
|
|
if (WARN_ON(!list_empty(&xfer_list)))
|
|
return -EINVAL;
|
|
init_completion(&done);
|
|
|
|
/* First record should be INFO */
|
|
if (rec->command != DFW_CMD_INFO) {
|
|
dev_err(codec->dev, "First record not INFO\r\n");
|
|
ret = -EINVAL;
|
|
goto abort;
|
|
}
|
|
|
|
if (inforec->info_version != INFO_VERSION) {
|
|
dev_err(codec->dev,
|
|
"Unsupported version (%02d) of INFO record\r\n",
|
|
inforec->info_version);
|
|
ret = -EINVAL;
|
|
goto abort;
|
|
}
|
|
|
|
dev_dbg(codec->dev, "Version v%02d INFO record found\r\n",
|
|
inforec->info_version);
|
|
|
|
/* Check it's a DSP file */
|
|
if (dsp != DEVICE_ID_WM0010) {
|
|
dev_err(codec->dev, "Not a WM0010 firmware file.\r\n");
|
|
ret = -EINVAL;
|
|
goto abort;
|
|
}
|
|
|
|
/* Skip the info record as we don't need to send it */
|
|
offset += ((rec->length) + 8);
|
|
rec = (void *)&rec->data[rec->length];
|
|
|
|
while (offset < fw->size) {
|
|
dev_dbg(codec->dev,
|
|
"Packet: command %d, data length = 0x%x\r\n",
|
|
rec->command, rec->length);
|
|
len = rec->length + 8;
|
|
|
|
xfer = kzalloc(sizeof(*xfer), GFP_KERNEL);
|
|
if (!xfer) {
|
|
ret = -ENOMEM;
|
|
goto abort;
|
|
}
|
|
|
|
xfer->codec = codec;
|
|
list_add_tail(&xfer->list, &xfer_list);
|
|
|
|
out = kzalloc(len, GFP_KERNEL | GFP_DMA);
|
|
if (!out) {
|
|
ret = -ENOMEM;
|
|
goto abort1;
|
|
}
|
|
xfer->t.rx_buf = out;
|
|
|
|
img = kzalloc(len, GFP_KERNEL | GFP_DMA);
|
|
if (!img) {
|
|
ret = -ENOMEM;
|
|
goto abort1;
|
|
}
|
|
xfer->t.tx_buf = img;
|
|
|
|
byte_swap_64((u64 *)&rec->command, img, len);
|
|
|
|
spi_message_init(&xfer->m);
|
|
xfer->m.complete = wm0010_boot_xfer_complete;
|
|
xfer->m.context = xfer;
|
|
xfer->t.len = len;
|
|
xfer->t.bits_per_word = 8;
|
|
|
|
if (!wm0010->pll_running) {
|
|
xfer->t.speed_hz = wm0010->sysclk / 6;
|
|
} else {
|
|
xfer->t.speed_hz = wm0010->max_spi_freq;
|
|
|
|
if (wm0010->board_max_spi_speed &&
|
|
(wm0010->board_max_spi_speed < wm0010->max_spi_freq))
|
|
xfer->t.speed_hz = wm0010->board_max_spi_speed;
|
|
}
|
|
|
|
/* Store max usable spi frequency for later use */
|
|
wm0010->max_spi_freq = xfer->t.speed_hz;
|
|
|
|
spi_message_add_tail(&xfer->t, &xfer->m);
|
|
|
|
offset += ((rec->length) + 8);
|
|
rec = (void *)&rec->data[rec->length];
|
|
|
|
if (offset >= fw->size) {
|
|
dev_dbg(codec->dev, "All transfers scheduled\n");
|
|
xfer->done = &done;
|
|
}
|
|
|
|
ret = spi_async(spi, &xfer->m);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Write failed: %d\n", ret);
|
|
goto abort1;
|
|
}
|
|
|
|
if (wm0010->boot_failed) {
|
|
dev_dbg(codec->dev, "Boot fail!\n");
|
|
ret = -EINVAL;
|
|
goto abort1;
|
|
}
|
|
}
|
|
|
|
wait_for_completion(&done);
|
|
|
|
ret = 0;
|
|
|
|
abort1:
|
|
while (!list_empty(&xfer_list)) {
|
|
xfer = list_first_entry(&xfer_list, struct wm0010_boot_xfer,
|
|
list);
|
|
kfree(xfer->t.rx_buf);
|
|
kfree(xfer->t.tx_buf);
|
|
list_del(&xfer->list);
|
|
kfree(xfer);
|
|
}
|
|
|
|
abort:
|
|
release_firmware(fw);
|
|
return ret;
|
|
}
|
|
|
|
static int wm0010_stage2_load(struct snd_soc_codec *codec)
|
|
{
|
|
struct spi_device *spi = to_spi_device(codec->dev);
|
|
struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec);
|
|
const struct firmware *fw;
|
|
struct spi_message m;
|
|
struct spi_transfer t;
|
|
u32 *img;
|
|
u8 *out;
|
|
int i;
|
|
int ret = 0;
|
|
|
|
ret = request_firmware(&fw, "wm0010_stage2.bin", codec->dev);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to request stage2 loader: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(codec->dev, "Downloading %zu byte stage 2 loader\n", fw->size);
|
|
|
|
/* Copy to local buffer first as vmalloc causes problems for dma */
|
|
img = kzalloc(fw->size, GFP_KERNEL | GFP_DMA);
|
|
if (!img) {
|
|
ret = -ENOMEM;
|
|
goto abort2;
|
|
}
|
|
|
|
out = kzalloc(fw->size, GFP_KERNEL | GFP_DMA);
|
|
if (!out) {
|
|
ret = -ENOMEM;
|
|
goto abort1;
|
|
}
|
|
|
|
memcpy(img, &fw->data[0], fw->size);
|
|
|
|
spi_message_init(&m);
|
|
memset(&t, 0, sizeof(t));
|
|
t.rx_buf = out;
|
|
t.tx_buf = img;
|
|
t.len = fw->size;
|
|
t.bits_per_word = 8;
|
|
t.speed_hz = wm0010->sysclk / 10;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
dev_dbg(codec->dev, "Starting initial download at %dHz\n",
|
|
t.speed_hz);
|
|
|
|
ret = spi_sync(spi, &m);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Initial download failed: %d\n", ret);
|
|
goto abort;
|
|
}
|
|
|
|
/* Look for errors from the boot ROM */
|
|
for (i = 0; i < fw->size; i++) {
|
|
if (out[i] != 0x55) {
|
|
dev_err(codec->dev, "Boot ROM error: %x in %d\n",
|
|
out[i], i);
|
|
wm0010_mark_boot_failure(wm0010);
|
|
ret = -EBUSY;
|
|
goto abort;
|
|
}
|
|
}
|
|
abort:
|
|
kfree(out);
|
|
abort1:
|
|
kfree(img);
|
|
abort2:
|
|
release_firmware(fw);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wm0010_boot(struct snd_soc_codec *codec)
|
|
{
|
|
struct spi_device *spi = to_spi_device(codec->dev);
|
|
struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec);
|
|
unsigned long flags;
|
|
int ret;
|
|
const struct firmware *fw;
|
|
struct spi_message m;
|
|
struct spi_transfer t;
|
|
struct dfw_pllrec pll_rec;
|
|
u32 *p, len;
|
|
u64 *img_swap;
|
|
u8 *out;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&wm0010->irq_lock, flags);
|
|
if (wm0010->state != WM0010_POWER_OFF)
|
|
dev_warn(wm0010->dev, "DSP already powered up!\n");
|
|
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
|
|
|
|
if (wm0010->sysclk > 26000000) {
|
|
dev_err(codec->dev, "Max DSP clock frequency is 26MHz\n");
|
|
ret = -ECANCELED;
|
|
goto err;
|
|
}
|
|
|
|
mutex_lock(&wm0010->lock);
|
|
wm0010->pll_running = false;
|
|
|
|
dev_dbg(codec->dev, "max_spi_freq: %d\n", wm0010->max_spi_freq);
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(wm0010->core_supplies),
|
|
wm0010->core_supplies);
|
|
if (ret != 0) {
|
|
dev_err(&spi->dev, "Failed to enable core supplies: %d\n",
|
|
ret);
|
|
mutex_unlock(&wm0010->lock);
|
|
goto err;
|
|
}
|
|
|
|
ret = regulator_enable(wm0010->dbvdd);
|
|
if (ret != 0) {
|
|
dev_err(&spi->dev, "Failed to enable DBVDD: %d\n", ret);
|
|
goto err_core;
|
|
}
|
|
|
|
/* Release reset */
|
|
gpio_set_value_cansleep(wm0010->gpio_reset, !wm0010->gpio_reset_value);
|
|
spin_lock_irqsave(&wm0010->irq_lock, flags);
|
|
wm0010->state = WM0010_OUT_OF_RESET;
|
|
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
|
|
|
|
/* First the bootloader */
|
|
ret = request_firmware(&fw, "wm0010_stage2.bin", codec->dev);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to request stage2 loader: %d\n",
|
|
ret);
|
|
goto abort;
|
|
}
|
|
|
|
if (!wait_for_completion_timeout(&wm0010->boot_completion,
|
|
msecs_to_jiffies(20)))
|
|
dev_err(codec->dev, "Failed to get interrupt from DSP\n");
|
|
|
|
spin_lock_irqsave(&wm0010->irq_lock, flags);
|
|
wm0010->state = WM0010_BOOTROM;
|
|
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
|
|
|
|
ret = wm0010_stage2_load(codec);
|
|
if (ret)
|
|
goto abort;
|
|
|
|
if (!wait_for_completion_timeout(&wm0010->boot_completion,
|
|
msecs_to_jiffies(20)))
|
|
dev_err(codec->dev, "Failed to get interrupt from DSP loader.\n");
|
|
|
|
spin_lock_irqsave(&wm0010->irq_lock, flags);
|
|
wm0010->state = WM0010_STAGE2;
|
|
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
|
|
|
|
/* Only initialise PLL if max_spi_freq initialised */
|
|
if (wm0010->max_spi_freq) {
|
|
|
|
/* Initialise a PLL record */
|
|
memset(&pll_rec, 0, sizeof(pll_rec));
|
|
pll_rec.command = DFW_CMD_PLL;
|
|
pll_rec.length = (sizeof(pll_rec) - 8);
|
|
|
|
/* On wm0010 only the CLKCTRL1 value is used */
|
|
pll_rec.clkctrl1 = wm0010->pll_clkctrl1;
|
|
|
|
ret = -ENOMEM;
|
|
len = pll_rec.length + 8;
|
|
out = kzalloc(len, GFP_KERNEL | GFP_DMA);
|
|
if (!out) {
|
|
dev_err(codec->dev,
|
|
"Failed to allocate RX buffer\n");
|
|
goto abort;
|
|
}
|
|
|
|
img_swap = kzalloc(len, GFP_KERNEL | GFP_DMA);
|
|
if (!img_swap)
|
|
goto abort;
|
|
|
|
/* We need to re-order for 0010 */
|
|
byte_swap_64((u64 *)&pll_rec, img_swap, len);
|
|
|
|
spi_message_init(&m);
|
|
memset(&t, 0, sizeof(t));
|
|
t.rx_buf = out;
|
|
t.tx_buf = img_swap;
|
|
t.len = len;
|
|
t.bits_per_word = 8;
|
|
t.speed_hz = wm0010->sysclk / 6;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
ret = spi_sync(spi, &m);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "First PLL write failed: %d\n", ret);
|
|
goto abort;
|
|
}
|
|
|
|
/* Use a second send of the message to get the return status */
|
|
ret = spi_sync(spi, &m);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Second PLL write failed: %d\n", ret);
|
|
goto abort;
|
|
}
|
|
|
|
p = (u32 *)out;
|
|
|
|
/* Look for PLL active code from the DSP */
|
|
for (i = 0; i < len / 4; i++) {
|
|
if (*p == 0x0e00ed0f) {
|
|
dev_dbg(codec->dev, "PLL packet received\n");
|
|
wm0010->pll_running = true;
|
|
break;
|
|
}
|
|
p++;
|
|
}
|
|
|
|
kfree(img_swap);
|
|
kfree(out);
|
|
} else
|
|
dev_dbg(codec->dev, "Not enabling DSP PLL.");
|
|
|
|
ret = wm0010_firmware_load("wm0010.dfw", codec);
|
|
|
|
if (ret != 0)
|
|
goto abort;
|
|
|
|
spin_lock_irqsave(&wm0010->irq_lock, flags);
|
|
wm0010->state = WM0010_FIRMWARE;
|
|
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
|
|
|
|
mutex_unlock(&wm0010->lock);
|
|
|
|
return 0;
|
|
|
|
abort:
|
|
/* Put the chip back into reset */
|
|
wm0010_halt(codec);
|
|
mutex_unlock(&wm0010->lock);
|
|
return ret;
|
|
|
|
err_core:
|
|
mutex_unlock(&wm0010->lock);
|
|
regulator_bulk_disable(ARRAY_SIZE(wm0010->core_supplies),
|
|
wm0010->core_supplies);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int wm0010_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
if (codec->dapm.bias_level == SND_SOC_BIAS_PREPARE)
|
|
wm0010_boot(codec);
|
|
break;
|
|
case SND_SOC_BIAS_PREPARE:
|
|
break;
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (codec->dapm.bias_level == SND_SOC_BIAS_PREPARE) {
|
|
mutex_lock(&wm0010->lock);
|
|
wm0010_halt(codec);
|
|
mutex_unlock(&wm0010->lock);
|
|
}
|
|
break;
|
|
case SND_SOC_BIAS_OFF:
|
|
break;
|
|
}
|
|
|
|
codec->dapm.bias_level = level;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm0010_set_sysclk(struct snd_soc_codec *codec, int source,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec);
|
|
unsigned int i;
|
|
|
|
wm0010->sysclk = freq;
|
|
|
|
if (freq < pll_clock_map[ARRAY_SIZE(pll_clock_map)-1].max_sysclk) {
|
|
wm0010->max_spi_freq = 0;
|
|
} else {
|
|
for (i = 0; i < ARRAY_SIZE(pll_clock_map); i++)
|
|
if (freq >= pll_clock_map[i].max_sysclk) {
|
|
wm0010->max_spi_freq = pll_clock_map[i].max_pll_spi_speed;
|
|
wm0010->pll_clkctrl1 = pll_clock_map[i].pll_clkctrl1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm0010_probe(struct snd_soc_codec *codec);
|
|
|
|
static struct snd_soc_codec_driver soc_codec_dev_wm0010 = {
|
|
.probe = wm0010_probe,
|
|
.set_bias_level = wm0010_set_bias_level,
|
|
.set_sysclk = wm0010_set_sysclk,
|
|
.idle_bias_off = true,
|
|
|
|
.dapm_widgets = wm0010_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(wm0010_dapm_widgets),
|
|
.dapm_routes = wm0010_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(wm0010_dapm_routes),
|
|
};
|
|
|
|
#define WM0010_RATES (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
|
|
#define WM0010_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
|
|
SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE |\
|
|
SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static struct snd_soc_dai_driver wm0010_dai[] = {
|
|
{
|
|
.name = "wm0010-sdi1",
|
|
.playback = {
|
|
.stream_name = "SDI1 Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM0010_RATES,
|
|
.formats = WM0010_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "SDI1 Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM0010_RATES,
|
|
.formats = WM0010_FORMATS,
|
|
},
|
|
},
|
|
{
|
|
.name = "wm0010-sdi2",
|
|
.playback = {
|
|
.stream_name = "SDI2 Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM0010_RATES,
|
|
.formats = WM0010_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "SDI2 Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM0010_RATES,
|
|
.formats = WM0010_FORMATS,
|
|
},
|
|
},
|
|
};
|
|
|
|
static irqreturn_t wm0010_irq(int irq, void *data)
|
|
{
|
|
struct wm0010_priv *wm0010 = data;
|
|
|
|
switch (wm0010->state) {
|
|
case WM0010_OUT_OF_RESET:
|
|
case WM0010_BOOTROM:
|
|
case WM0010_STAGE2:
|
|
spin_lock(&wm0010->irq_lock);
|
|
complete(&wm0010->boot_completion);
|
|
spin_unlock(&wm0010->irq_lock);
|
|
return IRQ_HANDLED;
|
|
default:
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int wm0010_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
wm0010->codec = codec;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm0010_spi_probe(struct spi_device *spi)
|
|
{
|
|
unsigned long gpio_flags;
|
|
int ret;
|
|
int trigger;
|
|
int irq;
|
|
struct wm0010_priv *wm0010;
|
|
|
|
wm0010 = devm_kzalloc(&spi->dev, sizeof(*wm0010),
|
|
GFP_KERNEL);
|
|
if (!wm0010)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&wm0010->lock);
|
|
spin_lock_init(&wm0010->irq_lock);
|
|
|
|
spi_set_drvdata(spi, wm0010);
|
|
wm0010->dev = &spi->dev;
|
|
|
|
if (dev_get_platdata(&spi->dev))
|
|
memcpy(&wm0010->pdata, dev_get_platdata(&spi->dev),
|
|
sizeof(wm0010->pdata));
|
|
|
|
init_completion(&wm0010->boot_completion);
|
|
|
|
wm0010->core_supplies[0].supply = "AVDD";
|
|
wm0010->core_supplies[1].supply = "DCVDD";
|
|
ret = devm_regulator_bulk_get(wm0010->dev, ARRAY_SIZE(wm0010->core_supplies),
|
|
wm0010->core_supplies);
|
|
if (ret != 0) {
|
|
dev_err(wm0010->dev, "Failed to obtain core supplies: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
wm0010->dbvdd = devm_regulator_get(wm0010->dev, "DBVDD");
|
|
if (IS_ERR(wm0010->dbvdd)) {
|
|
ret = PTR_ERR(wm0010->dbvdd);
|
|
dev_err(wm0010->dev, "Failed to obtain DBVDD: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (wm0010->pdata.gpio_reset) {
|
|
wm0010->gpio_reset = wm0010->pdata.gpio_reset;
|
|
|
|
if (wm0010->pdata.reset_active_high)
|
|
wm0010->gpio_reset_value = 1;
|
|
else
|
|
wm0010->gpio_reset_value = 0;
|
|
|
|
if (wm0010->gpio_reset_value)
|
|
gpio_flags = GPIOF_OUT_INIT_HIGH;
|
|
else
|
|
gpio_flags = GPIOF_OUT_INIT_LOW;
|
|
|
|
ret = devm_gpio_request_one(wm0010->dev, wm0010->gpio_reset,
|
|
gpio_flags, "wm0010 reset");
|
|
if (ret < 0) {
|
|
dev_err(wm0010->dev,
|
|
"Failed to request GPIO for DSP reset: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_err(wm0010->dev, "No reset GPIO configured\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
wm0010->state = WM0010_POWER_OFF;
|
|
|
|
irq = spi->irq;
|
|
if (wm0010->pdata.irq_flags)
|
|
trigger = wm0010->pdata.irq_flags;
|
|
else
|
|
trigger = IRQF_TRIGGER_FALLING;
|
|
trigger |= IRQF_ONESHOT;
|
|
|
|
ret = request_threaded_irq(irq, NULL, wm0010_irq, trigger | IRQF_ONESHOT,
|
|
"wm0010", wm0010);
|
|
if (ret) {
|
|
dev_err(wm0010->dev, "Failed to request IRQ %d: %d\n",
|
|
irq, ret);
|
|
return ret;
|
|
}
|
|
wm0010->irq = irq;
|
|
|
|
ret = irq_set_irq_wake(irq, 1);
|
|
if (ret) {
|
|
dev_err(wm0010->dev, "Failed to set IRQ %d as wake source: %d\n",
|
|
irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (spi->max_speed_hz)
|
|
wm0010->board_max_spi_speed = spi->max_speed_hz;
|
|
else
|
|
wm0010->board_max_spi_speed = 0;
|
|
|
|
ret = snd_soc_register_codec(&spi->dev,
|
|
&soc_codec_dev_wm0010, wm0010_dai,
|
|
ARRAY_SIZE(wm0010_dai));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm0010_spi_remove(struct spi_device *spi)
|
|
{
|
|
struct wm0010_priv *wm0010 = spi_get_drvdata(spi);
|
|
|
|
snd_soc_unregister_codec(&spi->dev);
|
|
|
|
gpio_set_value_cansleep(wm0010->gpio_reset,
|
|
wm0010->gpio_reset_value);
|
|
|
|
irq_set_irq_wake(wm0010->irq, 0);
|
|
|
|
if (wm0010->irq)
|
|
free_irq(wm0010->irq, wm0010);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver wm0010_spi_driver = {
|
|
.driver = {
|
|
.name = "wm0010",
|
|
.bus = &spi_bus_type,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = wm0010_spi_probe,
|
|
.remove = wm0010_spi_remove,
|
|
};
|
|
|
|
module_spi_driver(wm0010_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM0010 driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_LICENSE("GPL");
|