Jan Kiszka 7e87d11c9b iio: adc: Add support for TI ADC108S102 and ADC128S102 ... This is an upstream port of an IIO driver for the TI ADC108S102 and ADC128S102. The former can be found on the Intel Galileo Gen2 and the Siemens SIMATIC IOT2000. For those boards, ACPI-based enumeration is included. Due to the lack of regulators under ACPI, we hard-code the voltage provided to the VA pin of the ADC to 5 V, the value used on Galileo and IOT2000. For DT usage, the regulator "vref-supply" provides this information. Note that DT usage has not been tested. Original author: Bogdan Pricop <bogdan.pricop@emutex.com> Ported from Intel Galileo Gen2 BSP to Intel Yocto kernel: Todor Minchev <todor@minchev.co.uk>. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-05-21 15:11:14 +01:00
..
accel	iio: accel: bma180: Add ACPI enumeration support for BMA250E	2017-05-21 15:06:17 +01:00
adc	iio: adc: Add support for TI ADC108S102 and ADC128S102	2017-05-21 15:11:14 +01:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	drivers: iio: chemical: replace comma with a semicolon	2017-03-30 19:13:23 +01:00
common	iio: hid-sensor-hub: Implement batch mode	2017-05-16 19:44:01 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	iio:ad5064: Add support for ltc2633 and similar devices	2017-05-14 16:16:57 +01:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	Fourth set of IIO new device support, features and cleanups for the 4.12 cycle	2017-04-18 17:13:31 +02:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: add power management support	2017-05-14 16:52:33 +01:00
imu	iio: imu: st_lsm6dsx: substitute ifdef CONFIG_PM with __maybe_unused macro	2017-05-21 15:07:59 +01:00
light	iio: light: rpr0521 channel numbers reordered	2017-05-21 15:06:15 +01:00
magnetometer	Merge 4.11-rc4 into staging-next	2017-03-27 09:11:25 +02:00
orientation	iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support	2017-05-07 12:22:36 +01:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: pressure: zpa2326: report interrupted case as failure	2017-05-14 15:28:14 +01:00
proximity	iio: proximity: as3935: move storm out of range check	2017-04-27 07:22:46 +01:00
temperature	iio: temperature: maxim_thermocouple: add MAX31856 part	2017-05-07 12:36:41 +01:00
trigger	iio: stm32 trigger: Add support for TRGO2 triggers	2017-05-07 16:08:10 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio: core: Fix suspicious sizeof usage	2017-04-27 06:30:52 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: trigger: clean up viio_trigger_alloc()	2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: inkern: fix a static checker error	2017-04-26 06:04:06 +01:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00