mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-01-21 15:17:28 +07:00
7d44cc2082
* Use r8a77970 (V3M) CPG core clock and SYSC power domain macros These may be used in place of numeric constants now that they are present in Linus's tree. * Add r8a77970 (V3M) Starter Kit board support This includes basic support to bring up the board with a serial console and EtherAVB support * Add IPMMU nodes and connections to on-chip devices on r8a7795 (H3), r8a7796 (M3-W), r8a77970 (V3M) and r8a77995 (D3) SoCs Simon Horman says "With these patches applied a white list enabled IPMMU driver may be used to check silicon revision and then enable IPMMU in the known working cases." * Enable DMA for SCIF2 on r8a77995 (D2) SoC * Increase the number of GPIO bank 1 ports to 29 on r8a7795 (H3) SoC This adds support for the GP-1-28 port pin of the r8a7795 (H3) ES2.0 SoC * Add support for CAN to r8a77995 (D3) SoC Ulrich Hecht says "This is a by-the-datasheet implementation, with the datasheet missing some bits, namely the pin map. I filled in the gaps... by deducing the information from pin numbers already in the PFC driver, so careful scrutiny is advised." * Add support for SDHI to r8a77995 (D3) SoC * Add SoC name to file header of r8a7795 (H3) and r8a7796 (M3-W) Salvator-X and Salvator-XS board files Geert Uytterhoeven says "With the proliferation of Salvator-X and Salvator-XS boards carrying different R-Car Gen3 SoCs variants, several DTS files ended up having the same file headers. Add the SoC names to the file headers to avoid confusion." * Add device note for ROHM BD9571MWV PMIC to r8a7795 (H3) and r8a7796 (M3-W) Salvator-X and Salvator-XS boards. Geert Uytterhoeven says "This was based on the example in the DT binding documentation, but using IRQ0 instead of a GPIO interrupt, as that matches the schematics, and because INTC-EX is a simpler block." * Enable USB2.0 channel 0 on r8a77970 (V3M) ULCB Kingfisher board Vladimir Barinov says "The dedicated USB0_PWEN pin is used to control CN13 VBUS source from U43 power supply. MAX3355 can also provide VBUS, hence it should be disabled via OTG_OFFVBUSn node coming from gpio expander TCA9539. Set MAX3355 enabled using OTG_EXTLPn node to be able to read OTG ID of CN13." * Add support for r8a7795 (M3-W) Salvator-XS board Geert Uytterhoeven says "This patch series adds support for the version of the Salvator-XS development board equipped with an R-Car M3-W SiP. The DT was based on work for the Salvator-X and -XS boards with M3-W resp. H3 SiPs." * Add watchdog timer support to r8a77970 (V3M) eagle board Geert Uytterhoven says "This allows to use the watchdog timer to reset the board, until PSCI is enhanced to include such functionality." * Use Use R-Car SDHI Gen3 fallback on r8a7795 (H3) and r8a7796 (M3-W) SoCs * Set driver type for MMC on r8a7795 (H3) and r8a7796 (M3-W) Salvator-X and Salvator-XS boards. Wolfram Sang says "These boards are known to have eMMC issues with the default driver type. Specify a working one." -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlopDo0ACgkQ189kaWo3 T74XOA/+Ptv9Odl/V2U9RZ87AGnwXnAjDWeO6QOOMfeTzy4Q0q7fz6r5FVicK1Am H+Elb78vF2c+VuLOPmPxtB/dPOPgfb+NIvAxh4mEqhlEoCMs0nW2RsyTY9ydxzlw JQM/alhlhh+rNniMUkz+hvfoZUCzaFpGKrUL8XXDxIMf3d7EBVeT9+EhfI+7FkHI HDDCagM9vJGTwvVR6JMSvV8bcMgH+Pr4NL/OL9bA5iVlUmahsxRPiJP2Gi2cSsA6 h+vbLna4LWTiKmRR8N5qkqcrUDYZ75kCUMT3TwQERWOdUn6Zw0VoKTeLdKp53yIb 8UEKar82otcOANP7myxySUg1zHzAynyabn/F96n95xf7awYR+lRxbEv9L821LGD0 tMcQxsbM4Q+d9XJxs9mkUtSi4iuUR+lR7QCZSPuhiBSKmzUDrjlXkeu4nfqWtFjQ wlfToiF8MwaGfNpqEYcRpi1cMXH13TV7VIDv5MdIRsaR/r7IWFwznaNFixrT4gNg a3HArpaSFI+XBagwtcHYGb/l4b3uvULFOjc40yXsxrZQuss8dPREi3uAwwxY0rPw BVjI6pOQohHykbdplt0OZlOwvkMPyL8Wnn63E7Lk71PijepPbPk9OzVKPJ/eqy2n gtvxs7BgfPDh3fvqCGFdFpBZ6aRjNG3DBivRdA9Pwn2Q6vuSslQ= =VaY3 -----END PGP SIGNATURE----- Merge tag 'renesas-arm64-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM64 Based SoC DT Updates for v4.16" from Simon Horman: * Use r8a77970 (V3M) CPG core clock and SYSC power domain macros These may be used in place of numeric constants now that they are present in Linus's tree. * Add r8a77970 (V3M) Starter Kit board support This includes basic support to bring up the board with a serial console and EtherAVB support * Add IPMMU nodes and connections to on-chip devices on r8a7795 (H3), r8a7796 (M3-W), r8a77970 (V3M) and r8a77995 (D3) SoCs Simon Horman says "With these patches applied a white list enabled IPMMU driver may be used to check silicon revision and then enable IPMMU in the known working cases." * Enable DMA for SCIF2 on r8a77995 (D2) SoC * Increase the number of GPIO bank 1 ports to 29 on r8a7795 (H3) SoC This adds support for the GP-1-28 port pin of the r8a7795 (H3) ES2.0 SoC * Add support for CAN to r8a77995 (D3) SoC Ulrich Hecht says "This is a by-the-datasheet implementation, with the datasheet missing some bits, namely the pin map. I filled in the gaps... by deducing the information from pin numbers already in the PFC driver, so careful scrutiny is advised." * Add support for SDHI to r8a77995 (D3) SoC * Add SoC name to file header of r8a7795 (H3) and r8a7796 (M3-W) Salvator-X and Salvator-XS board files Geert Uytterhoeven says "With the proliferation of Salvator-X and Salvator-XS boards carrying different R-Car Gen3 SoCs variants, several DTS files ended up having the same file headers. Add the SoC names to the file headers to avoid confusion." * Add device note for ROHM BD9571MWV PMIC to r8a7795 (H3) and r8a7796 (M3-W) Salvator-X and Salvator-XS boards. Geert Uytterhoeven says "This was based on the example in the DT binding documentation, but using IRQ0 instead of a GPIO interrupt, as that matches the schematics, and because INTC-EX is a simpler block." * Enable USB2.0 channel 0 on r8a77970 (V3M) ULCB Kingfisher board Vladimir Barinov says "The dedicated USB0_PWEN pin is used to control CN13 VBUS source from U43 power supply. MAX3355 can also provide VBUS, hence it should be disabled via OTG_OFFVBUSn node coming from gpio expander TCA9539. Set MAX3355 enabled using OTG_EXTLPn node to be able to read OTG ID of CN13." * Add support for r8a7795 (M3-W) Salvator-XS board Geert Uytterhoeven says "This patch series adds support for the version of the Salvator-XS development board equipped with an R-Car M3-W SiP. The DT was based on work for the Salvator-X and -XS boards with M3-W resp. H3 SiPs." * Add watchdog timer support to r8a77970 (V3M) eagle board Geert Uytterhoven says "This allows to use the watchdog timer to reset the board, until PSCI is enhanced to include such functionality." * Use Use R-Car SDHI Gen3 fallback on r8a7795 (H3) and r8a7796 (M3-W) SoCs * Set driver type for MMC on r8a7795 (H3) and r8a7796 (M3-W) Salvator-X and Salvator-XS boards. Wolfram Sang says "These boards are known to have eMMC issues with the default driver type. Specify a working one." * tag 'renesas-arm64-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (54 commits) arm64: dts: renesas: r8a77970: use SYSC power domain macros arm64: dts: renesas: r8a77970: use CPG core clock macros arm64: dts: renesas: v3msk: add EtherAVB support arm64: dts: renesas: initial V3MSK board device tree arm64: dts: renesas: r8a77995: Connect Ethernet-AVB to IPMMU-RT arm64: dts: renesas: r8a77995: Add IPMMU device nodes arm64: dts: renesas: r8a77970: Enable IPMMU-DS1, RT and MM arm64: dts: renesas: r8a77970: Connect Ethernet-AVB to IPMMU-RT arm64: dts: renesas: r8a77970: Tie SYS-DMAC to IPMMU-DS1 arm64: dts: renesas: r8a77970: Add IPMMU device nodes arm64: dts: renesas: r8a77995: add DMA for SCIF2 arm64: dts: renesas: r8a77970: sort includes arm64: dts: renesas: r8a7795: Increase the number of GPIO bank 1 ports to 29 arm64: dts: renesas: r8a77995: Add CAN FD support arm64: dts: renesas: r8a77995: Add CAN support arm64: dts: renesas: r8a77995: Add CAN external clock support arm64: dts: renesas: r8a7795-salvator-xs: Add SoC name to file header arm64: dts: renesas: r8a7796-salvator-x: Add SoC name to file header arm64: dts: renesas: r8a7795-salvator-x: Add SoC name to file header arm64: dts: renesas: r8a7795-es1-salvator-x: Add SoC name to file header ... |
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| firmware | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel ============ This file was moved to Documentation/admin-guide/README.rst Please notice that there are several guides for kernel developers and users. These guides can be rendered in a number of formats, like HTML and PDF. In order to build the documentation, use ``make htmldocs`` or ``make pdfdocs``. There are various text files in the Documentation/ subdirectory, several of them using the Restructured Text markup notation. See Documentation/00-INDEX for a list of what is contained in each file. Please read the Documentation/process/changes.rst file, as it contains the requirements for building and running the kernel, and information about the problems which may result by upgrading your kernel.