mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-17 04:49:33 +07:00
e79a8bcb78
The DSA documentation specifies that each port must be capable of
forwarding frames to the CPU port. The last changes on bridging support
for the mv88e6xxx driver broke this requirement for non-bridged ports.
So as for the bridged ports, reserve a few VLANs (4000+) in the switch
to isolate ports that have not been bridged yet.
By default, a port will be isolated with the CPU and DSA ports. When the
port joins a bridge, it will leave its reserved port. When it is removed
from a bridge, it will join its reserved VLAN again.
Fixes: 5fe7f68016 ("net: dsa: mv88e6xxx: fix hardware bridging")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
345 lines
7.7 KiB
C
345 lines
7.7 KiB
C
/*
|
|
* net/dsa/mv88e6352.c - Marvell 88e6352 switch chip support
|
|
*
|
|
* Copyright (c) 2014 Guenter Roeck
|
|
*
|
|
* Derived from mv88e6123_61_65.c
|
|
* Copyright (c) 2008-2009 Marvell Semiconductor
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy.h>
|
|
#include <net/dsa.h>
|
|
#include "mv88e6xxx.h"
|
|
|
|
static const struct mv88e6xxx_switch_id mv88e6352_table[] = {
|
|
{ PORT_SWITCH_ID_6172, "Marvell 88E6172" },
|
|
{ PORT_SWITCH_ID_6176, "Marvell 88E6176" },
|
|
{ PORT_SWITCH_ID_6320, "Marvell 88E6320" },
|
|
{ PORT_SWITCH_ID_6320_A1, "Marvell 88E6320 (A1)" },
|
|
{ PORT_SWITCH_ID_6320_A2, "Marvell 88e6320 (A2)" },
|
|
{ PORT_SWITCH_ID_6321, "Marvell 88E6321" },
|
|
{ PORT_SWITCH_ID_6321_A1, "Marvell 88E6321 (A1)" },
|
|
{ PORT_SWITCH_ID_6321_A2, "Marvell 88e6321 (A2)" },
|
|
{ PORT_SWITCH_ID_6352, "Marvell 88E6352" },
|
|
{ PORT_SWITCH_ID_6352_A0, "Marvell 88E6352 (A0)" },
|
|
{ PORT_SWITCH_ID_6352_A1, "Marvell 88E6352 (A1)" },
|
|
};
|
|
|
|
static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
|
|
{
|
|
return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6352_table,
|
|
ARRAY_SIZE(mv88e6352_table));
|
|
}
|
|
|
|
static int mv88e6352_setup_global(struct dsa_switch *ds)
|
|
{
|
|
u32 upstream_port = dsa_upstream_port(ds);
|
|
int ret;
|
|
u32 reg;
|
|
|
|
ret = mv88e6xxx_setup_global(ds);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Discard packets with excessive collisions,
|
|
* mask all interrupt sources, enable PPU (bit 14, undocumented).
|
|
*/
|
|
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
|
|
GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_DISCARD_EXCESS);
|
|
|
|
/* Configure the upstream port, and configure the upstream
|
|
* port as the port to which ingress and egress monitor frames
|
|
* are to be sent.
|
|
*/
|
|
reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
|
|
upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
|
|
upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
|
|
REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
|
|
|
|
/* Disable remote management for now, and set the switch's
|
|
* DSA device number.
|
|
*/
|
|
REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv88e6352_setup(struct dsa_switch *ds)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
|
|
int ret;
|
|
|
|
ret = mv88e6xxx_setup_common(ds);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ps->num_ports = 7;
|
|
|
|
mutex_init(&ps->eeprom_mutex);
|
|
|
|
ret = mv88e6xxx_switch_reset(ds, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = mv88e6352_setup_global(ds);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return mv88e6xxx_setup_ports(ds);
|
|
}
|
|
|
|
static int mv88e6352_read_eeprom_word(struct dsa_switch *ds, int addr)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
|
|
int ret;
|
|
|
|
mutex_lock(&ps->eeprom_mutex);
|
|
|
|
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, GLOBAL2_EEPROM_OP,
|
|
GLOBAL2_EEPROM_OP_READ |
|
|
(addr & GLOBAL2_EEPROM_OP_ADDR_MASK));
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = mv88e6xxx_eeprom_busy_wait(ds);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2, GLOBAL2_EEPROM_DATA);
|
|
error:
|
|
mutex_unlock(&ps->eeprom_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int mv88e6352_get_eeprom(struct dsa_switch *ds,
|
|
struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
int offset;
|
|
int len;
|
|
int ret;
|
|
|
|
offset = eeprom->offset;
|
|
len = eeprom->len;
|
|
eeprom->len = 0;
|
|
|
|
eeprom->magic = 0xc3ec4951;
|
|
|
|
ret = mv88e6xxx_eeprom_load_wait(ds);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (offset & 1) {
|
|
int word;
|
|
|
|
word = mv88e6352_read_eeprom_word(ds, offset >> 1);
|
|
if (word < 0)
|
|
return word;
|
|
|
|
*data++ = (word >> 8) & 0xff;
|
|
|
|
offset++;
|
|
len--;
|
|
eeprom->len++;
|
|
}
|
|
|
|
while (len >= 2) {
|
|
int word;
|
|
|
|
word = mv88e6352_read_eeprom_word(ds, offset >> 1);
|
|
if (word < 0)
|
|
return word;
|
|
|
|
*data++ = word & 0xff;
|
|
*data++ = (word >> 8) & 0xff;
|
|
|
|
offset += 2;
|
|
len -= 2;
|
|
eeprom->len += 2;
|
|
}
|
|
|
|
if (len) {
|
|
int word;
|
|
|
|
word = mv88e6352_read_eeprom_word(ds, offset >> 1);
|
|
if (word < 0)
|
|
return word;
|
|
|
|
*data++ = word & 0xff;
|
|
|
|
offset++;
|
|
len--;
|
|
eeprom->len++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv88e6352_eeprom_is_readonly(struct dsa_switch *ds)
|
|
{
|
|
int ret;
|
|
|
|
ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2, GLOBAL2_EEPROM_OP);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!(ret & GLOBAL2_EEPROM_OP_WRITE_EN))
|
|
return -EROFS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv88e6352_write_eeprom_word(struct dsa_switch *ds, int addr,
|
|
u16 data)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
|
|
int ret;
|
|
|
|
mutex_lock(&ps->eeprom_mutex);
|
|
|
|
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, GLOBAL2_EEPROM_DATA, data);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, GLOBAL2_EEPROM_OP,
|
|
GLOBAL2_EEPROM_OP_WRITE |
|
|
(addr & GLOBAL2_EEPROM_OP_ADDR_MASK));
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = mv88e6xxx_eeprom_busy_wait(ds);
|
|
error:
|
|
mutex_unlock(&ps->eeprom_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int mv88e6352_set_eeprom(struct dsa_switch *ds,
|
|
struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
int offset;
|
|
int ret;
|
|
int len;
|
|
|
|
if (eeprom->magic != 0xc3ec4951)
|
|
return -EINVAL;
|
|
|
|
ret = mv88e6352_eeprom_is_readonly(ds);
|
|
if (ret)
|
|
return ret;
|
|
|
|
offset = eeprom->offset;
|
|
len = eeprom->len;
|
|
eeprom->len = 0;
|
|
|
|
ret = mv88e6xxx_eeprom_load_wait(ds);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (offset & 1) {
|
|
int word;
|
|
|
|
word = mv88e6352_read_eeprom_word(ds, offset >> 1);
|
|
if (word < 0)
|
|
return word;
|
|
|
|
word = (*data++ << 8) | (word & 0xff);
|
|
|
|
ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
offset++;
|
|
len--;
|
|
eeprom->len++;
|
|
}
|
|
|
|
while (len >= 2) {
|
|
int word;
|
|
|
|
word = *data++;
|
|
word |= *data++ << 8;
|
|
|
|
ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
offset += 2;
|
|
len -= 2;
|
|
eeprom->len += 2;
|
|
}
|
|
|
|
if (len) {
|
|
int word;
|
|
|
|
word = mv88e6352_read_eeprom_word(ds, offset >> 1);
|
|
if (word < 0)
|
|
return word;
|
|
|
|
word = (word & 0xff00) | *data++;
|
|
|
|
ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
offset++;
|
|
len--;
|
|
eeprom->len++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct dsa_switch_driver mv88e6352_switch_driver = {
|
|
.tag_protocol = DSA_TAG_PROTO_EDSA,
|
|
.priv_size = sizeof(struct mv88e6xxx_priv_state),
|
|
.probe = mv88e6352_probe,
|
|
.setup = mv88e6352_setup,
|
|
.set_addr = mv88e6xxx_set_addr_indirect,
|
|
.phy_read = mv88e6xxx_phy_read_indirect,
|
|
.phy_write = mv88e6xxx_phy_write_indirect,
|
|
.get_strings = mv88e6xxx_get_strings,
|
|
.get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
|
|
.get_sset_count = mv88e6xxx_get_sset_count,
|
|
.adjust_link = mv88e6xxx_adjust_link,
|
|
.set_eee = mv88e6xxx_set_eee,
|
|
.get_eee = mv88e6xxx_get_eee,
|
|
#ifdef CONFIG_NET_DSA_HWMON
|
|
.get_temp = mv88e6xxx_get_temp,
|
|
.get_temp_limit = mv88e6xxx_get_temp_limit,
|
|
.set_temp_limit = mv88e6xxx_set_temp_limit,
|
|
.get_temp_alarm = mv88e6xxx_get_temp_alarm,
|
|
#endif
|
|
.get_eeprom = mv88e6352_get_eeprom,
|
|
.set_eeprom = mv88e6352_set_eeprom,
|
|
.get_regs_len = mv88e6xxx_get_regs_len,
|
|
.get_regs = mv88e6xxx_get_regs,
|
|
.port_join_bridge = mv88e6xxx_port_bridge_join,
|
|
.port_leave_bridge = mv88e6xxx_port_bridge_leave,
|
|
.port_stp_update = mv88e6xxx_port_stp_update,
|
|
.port_pvid_get = mv88e6xxx_port_pvid_get,
|
|
.port_vlan_prepare = mv88e6xxx_port_vlan_prepare,
|
|
.port_vlan_add = mv88e6xxx_port_vlan_add,
|
|
.port_vlan_del = mv88e6xxx_port_vlan_del,
|
|
.vlan_getnext = mv88e6xxx_vlan_getnext,
|
|
.port_fdb_prepare = mv88e6xxx_port_fdb_prepare,
|
|
.port_fdb_add = mv88e6xxx_port_fdb_add,
|
|
.port_fdb_del = mv88e6xxx_port_fdb_del,
|
|
.port_fdb_dump = mv88e6xxx_port_fdb_dump,
|
|
};
|
|
|
|
MODULE_ALIAS("platform:mv88e6172");
|
|
MODULE_ALIAS("platform:mv88e6176");
|
|
MODULE_ALIAS("platform:mv88e6320");
|
|
MODULE_ALIAS("platform:mv88e6321");
|
|
MODULE_ALIAS("platform:mv88e6352");
|