linux_dsm_epyc7002/drivers/usb/misc/uss720.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

819 lines
22 KiB
C

/*****************************************************************************/
/*
* uss720.c -- USS720 USB Parport Cable.
*
* Copyright (C) 1999, 2005
* Thomas Sailer (t.sailer@alumni.ethz.ch)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Based on parport_pc.c
*
* History:
* 0.1 04.08.1999 Created
* 0.2 07.08.1999 Some fixes mainly suggested by Tim Waugh
* Interrupt handling currently disabled because
* usb_request_irq crashes somewhere within ohci.c
* for no apparent reason (that is for me, anyway)
* ECP currently untested
* 0.3 10.08.1999 fixing merge errors
* 0.4 13.08.1999 Added Vendor/Product ID of Brad Hard's cable
* 0.5 20.09.1999 usb_control_msg wrapper used
* Nov01.2000 usb_device_table support by Adam J. Richter
* 08.04.2001 Identify version on module load. gb
* 0.6 02.09.2005 Fix "scheduling in interrupt" problem by making save/restore
* context asynchronous
*
*/
/*****************************************************************************/
#include <linux/module.h>
#include <linux/socket.h>
#include <linux/parport.h>
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/delay.h>
#include <linux/completion.h>
#include <linux/kref.h>
/*
* Version Information
*/
#define DRIVER_VERSION "v0.6"
#define DRIVER_AUTHOR "Thomas M. Sailer, t.sailer@alumni.ethz.ch"
#define DRIVER_DESC "USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip"
/* --------------------------------------------------------------------- */
struct parport_uss720_private {
struct usb_device *usbdev;
struct parport *pp;
struct kref ref_count;
__u8 reg[7]; /* USB registers */
struct list_head asynclist;
spinlock_t asynclock;
};
struct uss720_async_request {
struct parport_uss720_private *priv;
struct kref ref_count;
struct list_head asynclist;
struct completion compl;
struct urb *urb;
struct usb_ctrlrequest dr;
__u8 reg[7];
};
/* --------------------------------------------------------------------- */
static void destroy_priv(struct kref *kref)
{
struct parport_uss720_private *priv = container_of(kref, struct parport_uss720_private, ref_count);
usb_put_dev(priv->usbdev);
kfree(priv);
dbg("destroying priv datastructure");
}
static void destroy_async(struct kref *kref)
{
struct uss720_async_request *rq = container_of(kref, struct uss720_async_request, ref_count);
struct parport_uss720_private *priv = rq->priv;
unsigned long flags;
if (likely(rq->urb))
usb_free_urb(rq->urb);
spin_lock_irqsave(&priv->asynclock, flags);
list_del_init(&rq->asynclist);
spin_unlock_irqrestore(&priv->asynclock, flags);
kfree(rq);
kref_put(&priv->ref_count, destroy_priv);
}
/* --------------------------------------------------------------------- */
static void async_complete(struct urb *urb)
{
struct uss720_async_request *rq;
struct parport *pp;
struct parport_uss720_private *priv;
rq = urb->context;
priv = rq->priv;
pp = priv->pp;
if (urb->status) {
err("async_complete: urb error %d", urb->status);
} else if (rq->dr.bRequest == 3) {
memcpy(priv->reg, rq->reg, sizeof(priv->reg));
#if 0
dbg("async_complete regs %02x %02x %02x %02x %02x %02x %02x",
(unsigned int)priv->reg[0], (unsigned int)priv->reg[1], (unsigned int)priv->reg[2],
(unsigned int)priv->reg[3], (unsigned int)priv->reg[4], (unsigned int)priv->reg[5],
(unsigned int)priv->reg[6]);
#endif
/* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */
if (rq->reg[2] & rq->reg[1] & 0x10 && pp)
parport_generic_irq(0, pp);
}
complete(&rq->compl);
kref_put(&rq->ref_count, destroy_async);
}
static struct uss720_async_request *submit_async_request(struct parport_uss720_private *priv,
__u8 request, __u8 requesttype, __u16 value, __u16 index,
gfp_t mem_flags)
{
struct usb_device *usbdev;
struct uss720_async_request *rq;
unsigned long flags;
int ret;
if (!priv)
return NULL;
usbdev = priv->usbdev;
if (!usbdev)
return NULL;
rq = kmalloc(sizeof(struct uss720_async_request), mem_flags);
if (!rq) {
err("submit_async_request out of memory");
return NULL;
}
kref_init(&rq->ref_count);
INIT_LIST_HEAD(&rq->asynclist);
init_completion(&rq->compl);
kref_get(&priv->ref_count);
rq->priv = priv;
rq->urb = usb_alloc_urb(0, mem_flags);
if (!rq->urb) {
kref_put(&rq->ref_count, destroy_async);
err("submit_async_request out of memory");
return NULL;
}
rq->dr.bRequestType = requesttype;
rq->dr.bRequest = request;
rq->dr.wValue = cpu_to_le16(value);
rq->dr.wIndex = cpu_to_le16(index);
rq->dr.wLength = cpu_to_le16((request == 3) ? sizeof(rq->reg) : 0);
usb_fill_control_urb(rq->urb, usbdev, (requesttype & 0x80) ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0),
(unsigned char *)&rq->dr,
(request == 3) ? rq->reg : NULL, (request == 3) ? sizeof(rq->reg) : 0, async_complete, rq);
/* rq->urb->transfer_flags |= URB_ASYNC_UNLINK; */
spin_lock_irqsave(&priv->asynclock, flags);
list_add_tail(&rq->asynclist, &priv->asynclist);
spin_unlock_irqrestore(&priv->asynclock, flags);
ret = usb_submit_urb(rq->urb, mem_flags);
if (!ret) {
kref_get(&rq->ref_count);
return rq;
}
kref_put(&rq->ref_count, destroy_async);
err("submit_async_request submit_urb failed with %d", ret);
return NULL;
}
static unsigned int kill_all_async_requests_priv(struct parport_uss720_private *priv)
{
struct uss720_async_request *rq;
unsigned long flags;
unsigned int ret = 0;
spin_lock_irqsave(&priv->asynclock, flags);
list_for_each_entry(rq, &priv->asynclist, asynclist) {
usb_unlink_urb(rq->urb);
ret++;
}
spin_unlock_irqrestore(&priv->asynclock, flags);
return ret;
}
/* --------------------------------------------------------------------- */
static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, gfp_t mem_flags)
{
struct parport_uss720_private *priv;
struct uss720_async_request *rq;
static const unsigned char regindex[9] = {
4, 0, 1, 5, 5, 0, 2, 3, 6
};
int ret;
if (!pp)
return -EIO;
priv = pp->private_data;
rq = submit_async_request(priv, 3, 0xc0, ((unsigned int)reg) << 8, 0, mem_flags);
if (!rq) {
err("get_1284_register(%u) failed", (unsigned int)reg);
return -EIO;
}
if (!val) {
kref_put(&rq->ref_count, destroy_async);
return 0;
}
if (wait_for_completion_timeout(&rq->compl, HZ)) {
ret = rq->urb->status;
*val = priv->reg[(reg >= 9) ? 0 : regindex[reg]];
if (ret)
warn("get_1284_register: usb error %d", ret);
kref_put(&rq->ref_count, destroy_async);
return ret;
}
warn("get_1284_register timeout");
kill_all_async_requests_priv(priv);
return -EIO;
}
static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, gfp_t mem_flags)
{
struct parport_uss720_private *priv;
struct uss720_async_request *rq;
if (!pp)
return -EIO;
priv = pp->private_data;
rq = submit_async_request(priv, 4, 0x40, (((unsigned int)reg) << 8) | val, 0, mem_flags);
if (!rq) {
err("set_1284_register(%u,%u) failed", (unsigned int)reg, (unsigned int)val);
return -EIO;
}
kref_put(&rq->ref_count, destroy_async);
return 0;
}
/* --------------------------------------------------------------------- */
/* ECR modes */
#define ECR_SPP 00
#define ECR_PS2 01
#define ECR_PPF 02
#define ECR_ECP 03
#define ECR_EPP 04
/* Safely change the mode bits in the ECR */
static int change_mode(struct parport *pp, int m)
{
struct parport_uss720_private *priv = pp->private_data;
int mode;
__u8 reg;
if (get_1284_register(pp, 6, &reg, GFP_KERNEL))
return -EIO;
/* Bits <7:5> contain the mode. */
mode = (priv->reg[2] >> 5) & 0x7;
if (mode == m)
return 0;
/* We have to go through mode 000 or 001 */
if (mode > ECR_PS2 && m > ECR_PS2)
if (change_mode(pp, ECR_PS2))
return -EIO;
if (m <= ECR_PS2 && !(priv->reg[1] & 0x20)) {
/* This mode resets the FIFO, so we may
* have to wait for it to drain first. */
unsigned long expire = jiffies + pp->physport->cad->timeout;
switch (mode) {
case ECR_PPF: /* Parallel Port FIFO mode */
case ECR_ECP: /* ECP Parallel Port mode */
/* Poll slowly. */
for (;;) {
if (get_1284_register(pp, 6, &reg, GFP_KERNEL))
return -EIO;
if (priv->reg[2] & 0x01)
break;
if (time_after_eq (jiffies, expire))
/* The FIFO is stuck. */
return -EBUSY;
msleep_interruptible(10);
if (signal_pending (current))
break;
}
}
}
/* Set the mode. */
if (set_1284_register(pp, 6, m << 5, GFP_KERNEL))
return -EIO;
if (get_1284_register(pp, 6, &reg, GFP_KERNEL))
return -EIO;
return 0;
}
/*
* Clear TIMEOUT BIT in EPP MODE
*/
static int clear_epp_timeout(struct parport *pp)
{
unsigned char stat;
if (get_1284_register(pp, 1, &stat, GFP_KERNEL))
return 1;
return stat & 1;
}
/*
* Access functions.
*/
#if 0
static int uss720_irq(int usbstatus, void *buffer, int len, void *dev_id)
{
struct parport *pp = (struct parport *)dev_id;
struct parport_uss720_private *priv = pp->private_data;
if (usbstatus != 0 || len < 4 || !buffer)
return 1;
memcpy(priv->reg, buffer, 4);
/* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */
if (priv->reg[2] & priv->reg[1] & 0x10)
parport_generic_irq(0, pp, NULL);
return 1;
}
#endif
static void parport_uss720_write_data(struct parport *pp, unsigned char d)
{
set_1284_register(pp, 0, d, GFP_KERNEL);
}
static unsigned char parport_uss720_read_data(struct parport *pp)
{
unsigned char ret;
if (get_1284_register(pp, 0, &ret, GFP_KERNEL))
return 0;
return ret;
}
static void parport_uss720_write_control(struct parport *pp, unsigned char d)
{
struct parport_uss720_private *priv = pp->private_data;
d = (d & 0xf) | (priv->reg[1] & 0xf0);
if (set_1284_register(pp, 2, d, GFP_KERNEL))
return;
priv->reg[1] = d;
}
static unsigned char parport_uss720_read_control(struct parport *pp)
{
struct parport_uss720_private *priv = pp->private_data;
return priv->reg[1] & 0xf; /* Use soft copy */
}
static unsigned char parport_uss720_frob_control(struct parport *pp, unsigned char mask, unsigned char val)
{
struct parport_uss720_private *priv = pp->private_data;
unsigned char d;
mask &= 0x0f;
val &= 0x0f;
d = (priv->reg[1] & (~mask)) ^ val;
if (set_1284_register(pp, 2, d, GFP_KERNEL))
return 0;
priv->reg[1] = d;
return d & 0xf;
}
static unsigned char parport_uss720_read_status(struct parport *pp)
{
unsigned char ret;
if (get_1284_register(pp, 1, &ret, GFP_KERNEL))
return 0;
return ret & 0xf8;
}
static void parport_uss720_disable_irq(struct parport *pp)
{
struct parport_uss720_private *priv = pp->private_data;
unsigned char d;
d = priv->reg[1] & ~0x10;
if (set_1284_register(pp, 2, d, GFP_KERNEL))
return;
priv->reg[1] = d;
}
static void parport_uss720_enable_irq(struct parport *pp)
{
struct parport_uss720_private *priv = pp->private_data;
unsigned char d;
d = priv->reg[1] | 0x10;
if (set_1284_register(pp, 2, d, GFP_KERNEL))
return;
priv->reg[1] = d;
}
static void parport_uss720_data_forward (struct parport *pp)
{
struct parport_uss720_private *priv = pp->private_data;
unsigned char d;
d = priv->reg[1] & ~0x20;
if (set_1284_register(pp, 2, d, GFP_KERNEL))
return;
priv->reg[1] = d;
}
static void parport_uss720_data_reverse (struct parport *pp)
{
struct parport_uss720_private *priv = pp->private_data;
unsigned char d;
d = priv->reg[1] | 0x20;
if (set_1284_register(pp, 2, d, GFP_KERNEL))
return;
priv->reg[1] = d;
}
static void parport_uss720_init_state(struct pardevice *dev, struct parport_state *s)
{
s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
s->u.pc.ecr = 0x24;
}
static void parport_uss720_save_state(struct parport *pp, struct parport_state *s)
{
struct parport_uss720_private *priv = pp->private_data;
#if 0
if (get_1284_register(pp, 2, NULL, GFP_ATOMIC))
return;
#endif
s->u.pc.ctr = priv->reg[1];
s->u.pc.ecr = priv->reg[2];
}
static void parport_uss720_restore_state(struct parport *pp, struct parport_state *s)
{
struct parport_uss720_private *priv = pp->private_data;
set_1284_register(pp, 2, s->u.pc.ctr, GFP_ATOMIC);
set_1284_register(pp, 6, s->u.pc.ecr, GFP_ATOMIC);
get_1284_register(pp, 2, NULL, GFP_ATOMIC);
priv->reg[1] = s->u.pc.ctr;
priv->reg[2] = s->u.pc.ecr;
}
static size_t parport_uss720_epp_read_data(struct parport *pp, void *buf, size_t length, int flags)
{
struct parport_uss720_private *priv = pp->private_data;
size_t got = 0;
if (change_mode(pp, ECR_EPP))
return 0;
for (; got < length; got++) {
if (get_1284_register(pp, 4, (char *)buf, GFP_KERNEL))
break;
buf++;
if (priv->reg[0] & 0x01) {
clear_epp_timeout(pp);
break;
}
}
change_mode(pp, ECR_PS2);
return got;
}
static size_t parport_uss720_epp_write_data(struct parport *pp, const void *buf, size_t length, int flags)
{
#if 0
struct parport_uss720_private *priv = pp->private_data;
size_t written = 0;
if (change_mode(pp, ECR_EPP))
return 0;
for (; written < length; written++) {
if (set_1284_register(pp, 4, (char *)buf, GFP_KERNEL))
break;
((char*)buf)++;
if (get_1284_register(pp, 1, NULL, GFP_KERNEL))
break;
if (priv->reg[0] & 0x01) {
clear_epp_timeout(pp);
break;
}
}
change_mode(pp, ECR_PS2);
return written;
#else
struct parport_uss720_private *priv = pp->private_data;
struct usb_device *usbdev = priv->usbdev;
int rlen;
int i;
if (!usbdev)
return 0;
if (change_mode(pp, ECR_EPP))
return 0;
i = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, 1), (void *)buf, length, &rlen, 20000);
if (i)
printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %Zu rlen %u\n", buf, length, rlen);
change_mode(pp, ECR_PS2);
return rlen;
#endif
}
static size_t parport_uss720_epp_read_addr(struct parport *pp, void *buf, size_t length, int flags)
{
struct parport_uss720_private *priv = pp->private_data;
size_t got = 0;
if (change_mode(pp, ECR_EPP))
return 0;
for (; got < length; got++) {
if (get_1284_register(pp, 3, (char *)buf, GFP_KERNEL))
break;
buf++;
if (priv->reg[0] & 0x01) {
clear_epp_timeout(pp);
break;
}
}
change_mode(pp, ECR_PS2);
return got;
}
static size_t parport_uss720_epp_write_addr(struct parport *pp, const void *buf, size_t length, int flags)
{
struct parport_uss720_private *priv = pp->private_data;
size_t written = 0;
if (change_mode(pp, ECR_EPP))
return 0;
for (; written < length; written++) {
if (set_1284_register(pp, 3, *(char *)buf, GFP_KERNEL))
break;
buf++;
if (get_1284_register(pp, 1, NULL, GFP_KERNEL))
break;
if (priv->reg[0] & 0x01) {
clear_epp_timeout(pp);
break;
}
}
change_mode(pp, ECR_PS2);
return written;
}
static size_t parport_uss720_ecp_write_data(struct parport *pp, const void *buffer, size_t len, int flags)
{
struct parport_uss720_private *priv = pp->private_data;
struct usb_device *usbdev = priv->usbdev;
int rlen;
int i;
if (!usbdev)
return 0;
if (change_mode(pp, ECR_ECP))
return 0;
i = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, 1), (void *)buffer, len, &rlen, 20000);
if (i)
printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %Zu rlen %u\n", buffer, len, rlen);
change_mode(pp, ECR_PS2);
return rlen;
}
static size_t parport_uss720_ecp_read_data(struct parport *pp, void *buffer, size_t len, int flags)
{
struct parport_uss720_private *priv = pp->private_data;
struct usb_device *usbdev = priv->usbdev;
int rlen;
int i;
if (!usbdev)
return 0;
if (change_mode(pp, ECR_ECP))
return 0;
i = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, 2), buffer, len, &rlen, 20000);
if (i)
printk(KERN_ERR "uss720: recvbulk ep 2 buf %p len %Zu rlen %u\n", buffer, len, rlen);
change_mode(pp, ECR_PS2);
return rlen;
}
static size_t parport_uss720_ecp_write_addr(struct parport *pp, const void *buffer, size_t len, int flags)
{
size_t written = 0;
if (change_mode(pp, ECR_ECP))
return 0;
for (; written < len; written++) {
if (set_1284_register(pp, 5, *(char *)buffer, GFP_KERNEL))
break;
buffer++;
}
change_mode(pp, ECR_PS2);
return written;
}
static size_t parport_uss720_write_compat(struct parport *pp, const void *buffer, size_t len, int flags)
{
struct parport_uss720_private *priv = pp->private_data;
struct usb_device *usbdev = priv->usbdev;
int rlen;
int i;
if (!usbdev)
return 0;
if (change_mode(pp, ECR_PPF))
return 0;
i = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, 1), (void *)buffer, len, &rlen, 20000);
if (i)
printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %Zu rlen %u\n", buffer, len, rlen);
change_mode(pp, ECR_PS2);
return rlen;
}
/* --------------------------------------------------------------------- */
static struct parport_operations parport_uss720_ops =
{
.owner = THIS_MODULE,
.write_data = parport_uss720_write_data,
.read_data = parport_uss720_read_data,
.write_control = parport_uss720_write_control,
.read_control = parport_uss720_read_control,
.frob_control = parport_uss720_frob_control,
.read_status = parport_uss720_read_status,
.enable_irq = parport_uss720_enable_irq,
.disable_irq = parport_uss720_disable_irq,
.data_forward = parport_uss720_data_forward,
.data_reverse = parport_uss720_data_reverse,
.init_state = parport_uss720_init_state,
.save_state = parport_uss720_save_state,
.restore_state = parport_uss720_restore_state,
.epp_write_data = parport_uss720_epp_write_data,
.epp_read_data = parport_uss720_epp_read_data,
.epp_write_addr = parport_uss720_epp_write_addr,
.epp_read_addr = parport_uss720_epp_read_addr,
.ecp_write_data = parport_uss720_ecp_write_data,
.ecp_read_data = parport_uss720_ecp_read_data,
.ecp_write_addr = parport_uss720_ecp_write_addr,
.compat_write_data = parport_uss720_write_compat,
.nibble_read_data = parport_ieee1284_read_nibble,
.byte_read_data = parport_ieee1284_read_byte,
};
/* --------------------------------------------------------------------- */
static int uss720_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *usbdev = usb_get_dev(interface_to_usbdev(intf));
struct usb_host_interface *interface;
struct usb_host_endpoint *endpoint;
struct parport_uss720_private *priv;
struct parport *pp;
unsigned char reg;
int i;
dbg("probe: vendor id 0x%x, device id 0x%x\n",
le16_to_cpu(usbdev->descriptor.idVendor),
le16_to_cpu(usbdev->descriptor.idProduct));
/* our known interfaces have 3 alternate settings */
if (intf->num_altsetting != 3) {
usb_put_dev(usbdev);
return -ENODEV;
}
i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
dbg("set inteface result %d", i);
interface = intf->cur_altsetting;
/*
* Allocate parport interface
*/
if (!(priv = kcalloc(sizeof(struct parport_uss720_private), 1, GFP_KERNEL))) {
usb_put_dev(usbdev);
return -ENOMEM;
}
priv->pp = NULL;
priv->usbdev = usbdev;
kref_init(&priv->ref_count);
spin_lock_init(&priv->asynclock);
INIT_LIST_HEAD(&priv->asynclist);
if (!(pp = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &parport_uss720_ops))) {
warn("could not register parport");
goto probe_abort;
}
priv->pp = pp;
pp->private_data = priv;
pp->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP | PARPORT_MODE_ECP | PARPORT_MODE_COMPAT;
/* set the USS720 control register to manual mode, no ECP compression, enable all ints */
set_1284_register(pp, 7, 0x00, GFP_KERNEL);
set_1284_register(pp, 6, 0x30, GFP_KERNEL); /* PS/2 mode */
set_1284_register(pp, 2, 0x0c, GFP_KERNEL);
/* debugging */
get_1284_register(pp, 0, &reg, GFP_KERNEL);
dbg("reg: %02x %02x %02x %02x %02x %02x %02x",
priv->reg[0], priv->reg[1], priv->reg[2], priv->reg[3], priv->reg[4], priv->reg[5], priv->reg[6]);
endpoint = &interface->endpoint[2];
dbg("epaddr %d interval %d", endpoint->desc.bEndpointAddress, endpoint->desc.bInterval);
parport_announce_port(pp);
usb_set_intfdata(intf, pp);
return 0;
probe_abort:
kill_all_async_requests_priv(priv);
kref_put(&priv->ref_count, destroy_priv);
return -ENODEV;
}
static void uss720_disconnect(struct usb_interface *intf)
{
struct parport *pp = usb_get_intfdata(intf);
struct parport_uss720_private *priv;
struct usb_device *usbdev;
dbg("disconnect");
usb_set_intfdata(intf, NULL);
if (pp) {
priv = pp->private_data;
usbdev = priv->usbdev;
priv->usbdev = NULL;
priv->pp = NULL;
dbg("parport_remove_port");
parport_remove_port(pp);
parport_put_port(pp);
kill_all_async_requests_priv(priv);
kref_put(&priv->ref_count, destroy_priv);
}
dbg("disconnect done");
}
/* table of cables that work through this driver */
static struct usb_device_id uss720_table [] = {
{ USB_DEVICE(0x047e, 0x1001) },
{ USB_DEVICE(0x0557, 0x2001) },
{ USB_DEVICE(0x0729, 0x1284) },
{ USB_DEVICE(0x1293, 0x0002) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, uss720_table);
static struct usb_driver uss720_driver = {
.name = "uss720",
.probe = uss720_probe,
.disconnect = uss720_disconnect,
.id_table = uss720_table,
};
/* --------------------------------------------------------------------- */
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
static int __init uss720_init(void)
{
int retval;
retval = usb_register(&uss720_driver);
if (retval)
goto out;
info(DRIVER_VERSION ":" DRIVER_DESC);
info("NOTE: this is a special purpose driver to allow nonstandard");
info("protocols (eg. bitbang) over USS720 usb to parallel cables");
info("If you just want to connect to a printer, use usblp instead");
out:
return retval;
}
static void __exit uss720_cleanup(void)
{
usb_deregister(&uss720_driver);
}
module_init(uss720_init);
module_exit(uss720_cleanup);
/* --------------------------------------------------------------------- */