linux_dsm_epyc7002/drivers/gpu/drm/msm/Makefile
Archit Taneja e17afdceb4 drm/msm/hdmi: HDMI 8996 PHY/PLL support
Add support for the HDMI PHY/PLL found in MSM8996/APQ8096.

Unlike the previous PHYs supported in the driver, this doesn't need
the powerup/powerdown ops. The PLL prepare/unprepare clock ops
enable/disable the phy itself.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-29 09:48:32 -05:00

78 lines
1.9 KiB
Makefile

ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
msm-y := \
adreno/adreno_device.o \
adreno/adreno_gpu.o \
adreno/a3xx_gpu.o \
adreno/a4xx_gpu.o \
hdmi/hdmi.o \
hdmi/hdmi_audio.o \
hdmi/hdmi_bridge.o \
hdmi/hdmi_connector.o \
hdmi/hdmi_hdcp.o \
hdmi/hdmi_i2c.o \
hdmi/hdmi_phy.o \
hdmi/hdmi_phy_8960.o \
hdmi/hdmi_phy_8x60.o \
hdmi/hdmi_phy_8x74.o \
edp/edp.o \
edp/edp_aux.o \
edp/edp_bridge.o \
edp/edp_connector.o \
edp/edp_ctrl.o \
edp/edp_phy.o \
mdp/mdp_format.o \
mdp/mdp_kms.o \
mdp/mdp4/mdp4_crtc.o \
mdp/mdp4/mdp4_dtv_encoder.o \
mdp/mdp4/mdp4_lcdc_encoder.o \
mdp/mdp4/mdp4_lvds_connector.o \
mdp/mdp4/mdp4_irq.o \
mdp/mdp4/mdp4_kms.o \
mdp/mdp4/mdp4_plane.o \
mdp/mdp5/mdp5_cfg.o \
mdp/mdp5/mdp5_ctl.o \
mdp/mdp5/mdp5_crtc.o \
mdp/mdp5/mdp5_encoder.o \
mdp/mdp5/mdp5_irq.o \
mdp/mdp5/mdp5_kms.o \
mdp/mdp5/mdp5_plane.o \
mdp/mdp5/mdp5_smp.o \
msm_atomic.o \
msm_drv.o \
msm_fb.o \
msm_gem.o \
msm_gem_prime.o \
msm_gem_submit.o \
msm_gpu.o \
msm_iommu.o \
msm_perf.o \
msm_rd.o \
msm_ringbuffer.o
msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_pll_8960.o
msm-$(CONFIG_COMMON_CLK) += hdmi/hdmi_phy_8996.o
msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
mdp/mdp4/mdp4_dsi_encoder.o \
dsi/dsi_cfg.o \
dsi/dsi_host.o \
dsi/dsi_manager.o \
dsi/phy/dsi_phy.o \
mdp/mdp5/mdp5_cmd_encoder.o
msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
msm-y += dsi/pll/dsi_pll.o
msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
endif
obj-$(CONFIG_DRM_MSM) += msm.o