mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 22:55:21 +07:00
efdfeb079c
As we augmented the regulator core to accept a GPIO descriptor instead of a GPIO number, we can augment the fixed GPIO regulator to look up and pass that descriptor directly from device tree or board GPIO descriptor look up tables. Some boards just auto-enumerate their fixed regulator platform devices and I have assumed they get names like "fixed-regulator.0" but it's pretty hard to guess this. I need some testing from board maintainers to be sure. Other boards are straight forward, using just plain "fixed-regulator" (ID -1) or "fixed-regulator.1" hammering down the device ID. It seems the da9055 and da9211 has never got around to actually passing any enable gpio into its platform data (not the in-tree code anyway) so we can just decide to simply pass a descriptor instead. The fixed GPIO-controlled regulator in mach-pxa/ezx.c was confusingly named "*_dummy_supply_device" while it is a very real device backed by a GPIO line. There is nothing dummy about it at all, so I renamed it with the infix *_regulator_* as part of this patch set. Intel MID portions tested by Andy. Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Check the x86 BCM stuff Acked-by: Tony Lindgren <tony@atomide.com> # OMAP1,2,3 maintainer Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
417 lines
9.6 KiB
C
417 lines
9.6 KiB
C
/*
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd
|
|
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
|
|
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#include <linux/gpio/driver.h>
|
|
/* Needed for gpio_to_irq() */
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/map.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "common.h"
|
|
#include "devices-imx27.h"
|
|
#include "hardware.h"
|
|
#include "iomux-mx27.h"
|
|
|
|
/*
|
|
* Base address of PBC controller, CS4
|
|
*/
|
|
#define PBC_BASE_ADDRESS 0xf4300000
|
|
#define PBC_REG_ADDR(offset) (void __force __iomem *) \
|
|
(PBC_BASE_ADDRESS + (offset))
|
|
|
|
/* When the PBC address connection is fixed in h/w, defined as 1 */
|
|
#define PBC_ADDR_SH 0
|
|
|
|
/* Offsets for the PBC Controller register */
|
|
/*
|
|
* PBC Board version register offset
|
|
*/
|
|
#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
|
|
/*
|
|
* PBC Board control register 1 set address.
|
|
*/
|
|
#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
|
|
/*
|
|
* PBC Board control register 1 clear address.
|
|
*/
|
|
#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
|
|
|
|
/* PBC Board Control Register 1 bit definitions */
|
|
#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
|
|
|
|
/* to determine the correct external crystal reference */
|
|
#define CKIH_27MHZ_BIT_SET (1 << 3)
|
|
|
|
static const int mx27ads_pins[] __initconst = {
|
|
/* UART0 */
|
|
PE12_PF_UART1_TXD,
|
|
PE13_PF_UART1_RXD,
|
|
PE14_PF_UART1_CTS,
|
|
PE15_PF_UART1_RTS,
|
|
/* UART1 */
|
|
PE3_PF_UART2_CTS,
|
|
PE4_PF_UART2_RTS,
|
|
PE6_PF_UART2_TXD,
|
|
PE7_PF_UART2_RXD,
|
|
/* UART2 */
|
|
PE8_PF_UART3_TXD,
|
|
PE9_PF_UART3_RXD,
|
|
PE10_PF_UART3_CTS,
|
|
PE11_PF_UART3_RTS,
|
|
/* UART3 */
|
|
PB26_AF_UART4_RTS,
|
|
PB28_AF_UART4_TXD,
|
|
PB29_AF_UART4_CTS,
|
|
PB31_AF_UART4_RXD,
|
|
/* UART4 */
|
|
PB18_AF_UART5_TXD,
|
|
PB19_AF_UART5_RXD,
|
|
PB20_AF_UART5_CTS,
|
|
PB21_AF_UART5_RTS,
|
|
/* UART5 */
|
|
PB10_AF_UART6_TXD,
|
|
PB12_AF_UART6_CTS,
|
|
PB11_AF_UART6_RXD,
|
|
PB13_AF_UART6_RTS,
|
|
/* FEC */
|
|
PD0_AIN_FEC_TXD0,
|
|
PD1_AIN_FEC_TXD1,
|
|
PD2_AIN_FEC_TXD2,
|
|
PD3_AIN_FEC_TXD3,
|
|
PD4_AOUT_FEC_RX_ER,
|
|
PD5_AOUT_FEC_RXD1,
|
|
PD6_AOUT_FEC_RXD2,
|
|
PD7_AOUT_FEC_RXD3,
|
|
PD8_AF_FEC_MDIO,
|
|
PD9_AIN_FEC_MDC,
|
|
PD10_AOUT_FEC_CRS,
|
|
PD11_AOUT_FEC_TX_CLK,
|
|
PD12_AOUT_FEC_RXD0,
|
|
PD13_AOUT_FEC_RX_DV,
|
|
PD14_AOUT_FEC_RX_CLK,
|
|
PD15_AOUT_FEC_COL,
|
|
PD16_AIN_FEC_TX_ER,
|
|
PF23_AIN_FEC_TX_EN,
|
|
/* I2C2 */
|
|
PC5_PF_I2C2_SDA,
|
|
PC6_PF_I2C2_SCL,
|
|
/* FB */
|
|
PA5_PF_LSCLK,
|
|
PA6_PF_LD0,
|
|
PA7_PF_LD1,
|
|
PA8_PF_LD2,
|
|
PA9_PF_LD3,
|
|
PA10_PF_LD4,
|
|
PA11_PF_LD5,
|
|
PA12_PF_LD6,
|
|
PA13_PF_LD7,
|
|
PA14_PF_LD8,
|
|
PA15_PF_LD9,
|
|
PA16_PF_LD10,
|
|
PA17_PF_LD11,
|
|
PA18_PF_LD12,
|
|
PA19_PF_LD13,
|
|
PA20_PF_LD14,
|
|
PA21_PF_LD15,
|
|
PA22_PF_LD16,
|
|
PA23_PF_LD17,
|
|
PA24_PF_REV,
|
|
PA25_PF_CLS,
|
|
PA26_PF_PS,
|
|
PA27_PF_SPL_SPR,
|
|
PA28_PF_HSYNC,
|
|
PA29_PF_VSYNC,
|
|
PA30_PF_CONTRAST,
|
|
PA31_PF_OE_ACD,
|
|
/* OWIRE */
|
|
PE16_AF_OWIRE,
|
|
/* SDHC1*/
|
|
PE18_PF_SD1_D0,
|
|
PE19_PF_SD1_D1,
|
|
PE20_PF_SD1_D2,
|
|
PE21_PF_SD1_D3,
|
|
PE22_PF_SD1_CMD,
|
|
PE23_PF_SD1_CLK,
|
|
/* SDHC2*/
|
|
PB4_PF_SD2_D0,
|
|
PB5_PF_SD2_D1,
|
|
PB6_PF_SD2_D2,
|
|
PB7_PF_SD2_D3,
|
|
PB8_PF_SD2_CMD,
|
|
PB9_PF_SD2_CLK,
|
|
};
|
|
|
|
static const struct mxc_nand_platform_data
|
|
mx27ads_nand_board_info __initconst = {
|
|
.width = 1,
|
|
.hw_ecc = 1,
|
|
};
|
|
|
|
/* ADS's NOR flash */
|
|
static struct physmap_flash_data mx27ads_flash_data = {
|
|
.width = 2,
|
|
};
|
|
|
|
static struct resource mx27ads_flash_resource = {
|
|
.start = 0xc0000000,
|
|
.end = 0xc0000000 + 0x02000000 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
};
|
|
|
|
static struct platform_device mx27ads_nor_mtd_device = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &mx27ads_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &mx27ads_flash_resource,
|
|
};
|
|
|
|
static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
|
|
.bitrate = 100000,
|
|
};
|
|
|
|
static struct i2c_board_info mx27ads_i2c_devices[] = {
|
|
};
|
|
|
|
static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
if (value)
|
|
imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
|
|
else
|
|
imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
|
|
}
|
|
|
|
static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#define MX27ADS_LCD_GPIO (6 * 32)
|
|
|
|
static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer =
|
|
REGULATOR_SUPPLY("lcd", "imx-fb.0");
|
|
|
|
static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = &mx27ads_lcd_regulator_consumer,
|
|
.num_consumer_supplies = 1,
|
|
};
|
|
|
|
static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
|
|
.supply_name = "LCD",
|
|
.microvolts = 3300000,
|
|
.init_data = &mx27ads_lcd_regulator_init_data,
|
|
};
|
|
|
|
static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = {
|
|
.dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
|
|
.table = {
|
|
GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static void __init mx27ads_regulator_init(void)
|
|
{
|
|
struct gpio_chip *vchip;
|
|
|
|
vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
|
|
vchip->owner = THIS_MODULE;
|
|
vchip->label = "LCD";
|
|
vchip->base = MX27ADS_LCD_GPIO;
|
|
vchip->ngpio = 1;
|
|
vchip->direction_output = vgpio_dir_out;
|
|
vchip->set = vgpio_set;
|
|
gpiochip_add_data(vchip, NULL);
|
|
|
|
gpiod_add_lookup_table(&mx27ads_lcd_regulator_gpiod_table);
|
|
|
|
platform_device_register_data(NULL, "reg-fixed-voltage",
|
|
PLATFORM_DEVID_AUTO,
|
|
&mx27ads_lcd_regulator_pdata,
|
|
sizeof(mx27ads_lcd_regulator_pdata));
|
|
}
|
|
|
|
static struct imx_fb_videomode mx27ads_modes[] = {
|
|
{
|
|
.mode = {
|
|
.name = "Sharp-LQ035Q7",
|
|
.refresh = 60,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.pixclock = 188679, /* in ps (5.3MHz) */
|
|
.hsync_len = 1,
|
|
.left_margin = 9,
|
|
.right_margin = 16,
|
|
.vsync_len = 1,
|
|
.upper_margin = 7,
|
|
.lower_margin = 9,
|
|
},
|
|
.bpp = 16,
|
|
.pcr = 0xFB008BC0,
|
|
},
|
|
};
|
|
|
|
static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
|
|
.mode = mx27ads_modes,
|
|
.num_modes = ARRAY_SIZE(mx27ads_modes),
|
|
|
|
/*
|
|
* - HSYNC active high
|
|
* - VSYNC active high
|
|
* - clk notenabled while idle
|
|
* - clock inverted
|
|
* - data not inverted
|
|
* - data enable low active
|
|
* - enable sharp mode
|
|
*/
|
|
.pwmr = 0x00A903FF,
|
|
.lscr1 = 0x00120300,
|
|
.dmacr = 0x00020010,
|
|
};
|
|
|
|
static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
|
|
void *data)
|
|
{
|
|
return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
|
|
IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
|
|
}
|
|
|
|
static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
|
|
void *data)
|
|
{
|
|
return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
|
|
IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
|
|
}
|
|
|
|
static void mx27ads_sdhc1_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
|
|
}
|
|
|
|
static void mx27ads_sdhc2_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
|
|
}
|
|
|
|
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
|
|
.init = mx27ads_sdhc1_init,
|
|
.exit = mx27ads_sdhc1_exit,
|
|
};
|
|
|
|
static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
|
|
.init = mx27ads_sdhc2_init,
|
|
.exit = mx27ads_sdhc2_exit,
|
|
};
|
|
|
|
static struct platform_device *platform_devices[] __initdata = {
|
|
&mx27ads_nor_mtd_device,
|
|
};
|
|
|
|
static const struct imxuart_platform_data uart_pdata __initconst = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
static void __init mx27ads_board_init(void)
|
|
{
|
|
imx27_soc_init();
|
|
|
|
mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
|
|
"mx27ads");
|
|
|
|
imx27_add_imx_uart0(&uart_pdata);
|
|
imx27_add_imx_uart1(&uart_pdata);
|
|
imx27_add_imx_uart2(&uart_pdata);
|
|
imx27_add_imx_uart3(&uart_pdata);
|
|
imx27_add_imx_uart4(&uart_pdata);
|
|
imx27_add_imx_uart5(&uart_pdata);
|
|
imx27_add_mxc_nand(&mx27ads_nand_board_info);
|
|
|
|
/* only the i2c master 1 is used on this CPU card */
|
|
i2c_register_board_info(1, mx27ads_i2c_devices,
|
|
ARRAY_SIZE(mx27ads_i2c_devices));
|
|
imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
|
|
imx27_add_imx_fb(&mx27ads_fb_data);
|
|
|
|
imx27_add_fec(NULL);
|
|
imx27_add_mxc_w1();
|
|
}
|
|
|
|
static void __init mx27ads_late_init(void)
|
|
{
|
|
mx27ads_regulator_init();
|
|
|
|
imx27_add_mxc_mmc(0, &sdhc1_pdata);
|
|
imx27_add_mxc_mmc(1, &sdhc2_pdata);
|
|
|
|
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
|
}
|
|
|
|
static void __init mx27ads_timer_init(void)
|
|
{
|
|
unsigned long fref = 26000000;
|
|
|
|
if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
|
|
fref = 27000000;
|
|
|
|
mx27_clocks_init(fref);
|
|
}
|
|
|
|
static struct map_desc mx27ads_io_desc[] __initdata = {
|
|
{
|
|
.virtual = PBC_BASE_ADDRESS,
|
|
.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
|
|
.length = SZ_1M,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
static void __init mx27ads_map_io(void)
|
|
{
|
|
mx27_map_io();
|
|
iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
|
|
}
|
|
|
|
MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
|
|
/* maintainer: Freescale Semiconductor, Inc. */
|
|
.atag_offset = 0x100,
|
|
.map_io = mx27ads_map_io,
|
|
.init_early = imx27_init_early,
|
|
.init_irq = mx27_init_irq,
|
|
.init_time = mx27ads_timer_init,
|
|
.init_machine = mx27ads_board_init,
|
|
.init_late = mx27ads_late_init,
|
|
.restart = mxc_restart,
|
|
MACHINE_END
|