Vignesh Raghavendra 7cf4df30a9 serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout ... Terminate and flush DMA internal buffers, before pushing RX data to higher layer. Otherwise, this will lead to data corruption, as driver would end up pushing stale buffer data to higher layer while actual data is still stuck inside DMA hardware and has yet not arrived at the memory. While at that, replace deprecated dmaengine_terminate_all() with dmaengine_terminate_async(). Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319110344.21348-2-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2020-03-24 12:25:10 +01:00
..
8250	serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout	2020-03-24 12:25:10 +01:00
cpm_uart	tty: serial: Use the correct style for SPDX License Identifier	2020-03-07 09:52:01 +01:00
jsm	tty: serial: Use the correct style for SPDX License Identifier	2020-03-07 09:52:01 +01:00
21285.c	tty: serial: 21285: stop using the unused[] variable from struct uart_port	2019-12-19 20:10:28 +01:00
altera_jtaguart.c
altera_uart.c
amba-pl010.c	tty/serial: Migrate amba-pl01* to use has_sysrq	2019-12-18 15:04:44 +01:00
amba-pl011.c	tty/serial: Migrate amba-pl01* to use has_sysrq	2019-12-18 15:04:44 +01:00
amba-pl011.h
apbuart.c	tty/serial: Migrate apbuart to use has_sysrq	2019-12-18 15:04:44 +01:00
apbuart.h
ar933x_uart.c	serial: ar933x_uart: add RS485 support	2020-03-06 13:26:26 +01:00
arc_uart.c	tty/serial: Migrate arc_uart to use has_sysrq	2019-12-18 15:04:45 +01:00
atmel_serial.c	tty/serial: atmel: Use uart_console() helper	2020-03-12 10:00:22 +01:00
atmel_serial.h	tty: serial: Use the correct style for SPDX License Identifier	2020-03-07 09:52:01 +01:00
bcm63xx_uart.c	tty/serial: Migrate bcm63xx_uart to use has_sysrq	2019-12-18 15:04:43 +01:00
clps711x.c	tty/serial: Migrate clps711x to use has_sysrq	2019-12-18 15:04:46 +01:00
digicolor-usart.c	tty/serial: digicolor: Fix digicolor-usart already registered warning	2019-06-10 19:08:31 +02:00
dz.c	TTY/Serial driver updates for 5.6-rc1	2020-01-29 10:13:27 -08:00
dz.h
earlycon-arm-semihost.c
earlycon-riscv-sbi.c
earlycon.c	serial: earlycon: prefer EARLYCON_DECLARE() variant	2020-03-07 09:52:01 +01:00
efm32-uart.c	tty: serial: efm32: fix spelling mistake "reserverd" -> "reserved"	2020-02-19 11:38:58 +01:00
fsl_linflexuart.c	tty/serial: Migrate fsl_linflexuart to use has_sysrq	2019-12-18 15:04:48 +01:00
fsl_lpuart.c	tty: serial: fsl_lpuart: add LS1028A earlycon support	2020-03-12 10:02:00 +01:00
icom.c	tty: serial: Remove call to memset after pci_alloc_consistent	2019-09-04 12:43:44 +02:00
icom.h	tty: serial: Use the correct style for SPDX License Identifier	2020-03-07 09:52:01 +01:00
ifx6x60.c	tty: serial: ifx6x60: Convert to GPIO descriptors	2020-03-12 10:03:54 +01:00
ifx6x60.h	tty: serial: ifx6x60: Convert to GPIO descriptors	2020-03-12 10:03:54 +01:00
imx.c	tty: imx serial: Implement support for reversing TX and RX polarity	2020-03-06 13:26:26 +01:00
ip22zilog.c	tty/serial: Migrate ip22zilog to use has_sysrq	2019-12-18 15:04:50 +01:00
ip22zilog.h
Kconfig	Revert "tty: serial: samsung_tty: build it for any platform"	2020-03-17 15:22:23 +01:00
kgdb_nmi.c	tty/serial: kgdb_nmi: use true,false for bool variable	2020-01-14 14:34:04 +01:00
kgdboc.c	kgdboc: Use for_each_console() helper	2020-02-10 12:34:43 -08:00
lantiq.c	tty: serial: lantiq: Drop GPIO include	2020-03-06 13:16:16 +01:00
lpc32xx_hs.c	TTY/Serial driver changes for 5.4-rc1	2019-09-18 10:50:47 -07:00
Makefile	{tty: serial, nand: onenand}: samsung: rename to fix build warning	2019-11-18 18:49:11 +01:00
max310x.c	serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control	2019-09-05 09:57:44 +02:00
max3100.c
mcf.c
men_z135_uart.c	drivers: mcb: use symbol namespaces	2019-11-03 19:54:53 +01:00
meson_uart.c	TTY/Serial driver updates for 5.6-rc1	2020-01-29 10:13:27 -08:00
milbeaut_usio.c	tty/serial: Migrate milbeaut_usio to use has_sysrq	2019-12-18 15:04:51 +01:00
mpc52xx_uart.c	tty/serial: mpc52xx_uart: Don't zero port->sysrq	2019-12-18 15:04:52 +01:00
mps2-uart.c
msm_serial.c	tty: serial: msm_serial: RX SW/FIFO mode fallback	2020-01-14 14:07:51 +01:00
mux.c	TTY/Serial driver updates for 5.6-rc1	2020-01-29 10:13:27 -08:00
mvebu-uart.c	tty:serial:mvebu-uart:fix a wrong return	2020-03-05 21:26:34 +01:00
mxs-auart.c	tty/serial: Migrate mxs-auart to use has_sysrq	2019-12-18 15:04:53 +01:00
omap-serial.c	tty/serial: Migrate omap-serial to use has_sysrq	2019-12-18 15:04:54 +01:00
owl-uart.c	remove ioremap_nocache and devm_ioremap_nocache	2020-01-06 09:45:59 +01:00
pch_uart.c	tty: serial: pch_uart: Use scnprintf() for avoiding potential buffer overflow	2020-03-18 12:59:29 +01:00
pic32_uart.c	serial: pic32_uart: Use uart_console() helper	2020-03-12 10:00:22 +01:00
pic32_uart.h	tty: serial: Use the correct style for SPDX License Identifier	2020-03-07 09:52:01 +01:00
pmac_zilog.c	tty/serial: Migrate pmac_zilog to use has_sysrq	2019-12-18 15:04:56 +01:00
pmac_zilog.h
pnx8xxx_uart.c	tty/serial: Migrate pnx8xxx_uart to use has_sysrq	2019-12-18 15:04:57 +01:00
pxa.c	tty/serial: Migrate pxa to use has_sysrq	2019-12-18 15:04:57 +01:00
qcom_geni_serial.c	tty: serial: qcom_geni_serial: Don't try to manually disable the console	2020-03-14 09:40:27 +01:00
rda-uart.c	remove ioremap_nocache and devm_ioremap_nocache	2020-01-06 09:45:59 +01:00
rp2.c
sa1100.c	tty/serial: Migrate sa1100 to use has_sysrq	2019-12-18 15:04:59 +01:00
samsung_tty.c	serial: samsung: Rename Exynos to lowercase	2020-01-06 20:22:33 +01:00
sb1250-duart.c	TTY/Serial driver updates for 5.6-rc1	2020-01-29 10:13:27 -08:00
sc16is7xx.c	serial: sc16is7xx: Replace zero-length array with flexible-array member	2020-02-13 12:00:23 -08:00
sccnxp.c	tty/serial: Migrate sccnxp to use has_sysrq	2019-12-18 15:05:00 +01:00
serial_core.c	serial: core: Allow detach and attach serial device for console	2020-03-17 15:57:59 +01:00
serial_mctrl_gpio.c	serial: mctrl_gpio: Check for NULL pointer	2019-10-07 13:21:54 +02:00
serial_mctrl_gpio.h	tty: serial: Use the correct style for SPDX License Identifier	2020-03-07 09:52:01 +01:00
serial_txx9.c	tty/serial: Migrate serial_txx9 to use has_sysrq	2019-12-18 15:05:01 +01:00
serial-tegra.c	tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started	2020-02-10 12:32:13 -08:00
sh-sci.c	TTY/Serial driver updates for 5.6-rc1	2020-01-29 10:13:27 -08:00
sh-sci.h
sifive.c	tty: serial: Add CONSOLE_POLL support to SiFive UART	2020-03-18 11:07:13 +01:00
sirfsoc_uart.c
sirfsoc_uart.h	tty: serial: Use the correct style for SPDX License Identifier	2020-03-07 09:52:01 +01:00
sprd_serial.c	serial: sprd: remove redundant sprd_port cleanup	2020-03-18 12:20:04 +01:00
st-asc.c	tty: st-asc: switch to using devm_gpiod_get()	2020-01-10 14:01:33 +01:00
stm32-usart.c	tty/serial: Migrate stm32-usart to use has_sysrq	2019-12-18 15:05:04 +01:00
stm32-usart.h	tty: serial: Use the correct style for SPDX License Identifier	2020-03-07 09:52:01 +01:00
suncore.c
sunhv.c	tty/serial: Migrate sunhv to use has_sysrq	2019-12-18 15:05:05 +01:00
sunsab.c	tty/serial: Migrate sunsab to use has_sysrq	2019-12-18 15:05:05 +01:00
sunsab.h
sunsu.c	tty/serial: Migrate sunsu to use has_sysrq	2019-12-18 15:05:06 +01:00
sunzilog.c	tty/serial: Migrate sunzilog to use has_sysrq	2019-12-18 15:05:08 +01:00
sunzilog.h
tegra-tcu.c
timbuart.c
timbuart.h	tty: serial: Use the correct style for SPDX License Identifier	2020-03-07 09:52:01 +01:00
uartlite.c	Revert "serial-uartlite: Move the uart register"	2019-11-14 06:29:08 +08:00
ucc_uart.c	ARM: SoC-related driver updates	2020-02-08 14:04:19 -08:00
vr41xx_siu.c	tty/serial: Migrate vr41xx_siu to use has_sysrq	2019-12-18 15:05:09 +01:00
vt8500_serial.c	tty/serial: Migrate vt8500_serial to use has_sysrq	2019-12-18 15:05:09 +01:00
xilinx_uartps.c	serial: uartps: Add TACTIVE check in cdns_uart_tx_empty function	2020-03-24 12:23:04 +01:00
zs.c	TTY/Serial driver updates for 5.6-rc1	2020-01-29 10:13:27 -08:00
zs.h