linux_dsm_epyc7002/include/linux/serial_sci.h
Laurent Pinchart 89b5c1ab94 serial: sh-sci: Remove platform data mapbase and irqs fields
The fields are not used anymore by board files, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 21:50:54 +09:00

120 lines
2.5 KiB
C

#ifndef __LINUX_SERIAL_SCI_H
#define __LINUX_SERIAL_SCI_H
#include <linux/serial_core.h>
#include <linux/sh_dma.h>
/*
* Generic header for SuperH (H)SCI(F) (used by sh/sh64 and related parts)
*/
#define SCIx_NOT_SUPPORTED (-1)
#define SCSCR_TIE (1 << 7)
#define SCSCR_RIE (1 << 6)
#define SCSCR_TE (1 << 5)
#define SCSCR_RE (1 << 4)
#define SCSCR_REIE (1 << 3) /* not supported by all parts */
#define SCSCR_TOIE (1 << 2) /* not supported by all parts */
#define SCSCR_CKE1 (1 << 1)
#define SCSCR_CKE0 (1 << 0)
/* SCxSR SCI */
#define SCI_TDRE 0x80
#define SCI_RDRF 0x40
#define SCI_ORER 0x20
#define SCI_FER 0x10
#define SCI_PER 0x08
#define SCI_TEND 0x04
#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
/* SCxSR SCIF, HSCIF */
#define SCIF_ER 0x0080
#define SCIF_TEND 0x0040
#define SCIF_TDFE 0x0020
#define SCIF_BRK 0x0010
#define SCIF_FER 0x0008
#define SCIF_PER 0x0004
#define SCIF_RDF 0x0002
#define SCIF_DR 0x0001
#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
/* SCSPTR, optional */
#define SCSPTR_RTSIO (1 << 7)
#define SCSPTR_CTSIO (1 << 5)
#define SCSPTR_SPB2IO (1 << 1)
#define SCSPTR_SPB2DT (1 << 0)
/* HSSRR HSCIF */
#define HSCIF_SRE 0x8000
enum {
SCIx_PROBE_REGTYPE,
SCIx_SCI_REGTYPE,
SCIx_IRDA_REGTYPE,
SCIx_SCIFA_REGTYPE,
SCIx_SCIFB_REGTYPE,
SCIx_SH2_SCIF_FIFODATA_REGTYPE,
SCIx_SH3_SCIF_REGTYPE,
SCIx_SH4_SCIF_REGTYPE,
SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
SCIx_SH4_SCIF_FIFODATA_REGTYPE,
SCIx_SH7705_SCIF_REGTYPE,
SCIx_HSCIF_REGTYPE,
SCIx_NR_REGTYPES,
};
/*
* SCI register subset common for all port types.
* Not all registers will exist on all parts.
*/
enum {
SCSMR, SCBRR, SCSCR, SCxSR,
SCFCR, SCFDR, SCxTDR, SCxRDR,
SCLSR, SCTFDR, SCRFDR, SCSPTR,
HSSRR,
SCIx_NR_REGS,
};
struct device;
struct plat_sci_port_ops {
void (*init_pins)(struct uart_port *, unsigned int cflag);
};
/*
* Port-specific capabilities
*/
#define SCIx_HAVE_RTSCTS (1 << 0)
/*
* Platform device specific platform_data struct
*/
struct plat_sci_port {
unsigned int type; /* SCI / SCIF / IRDA / HSCIF */
upf_t flags; /* UPF_* flags */
unsigned long capabilities; /* Port features/capabilities */
unsigned int sampling_rate;
unsigned int scscr; /* SCSCR initialization */
/*
* Platform overrides if necessary, defaults otherwise.
*/
int port_reg;
unsigned char regshift;
unsigned char regtype;
struct plat_sci_port_ops *ops;
unsigned int dma_slave_tx;
unsigned int dma_slave_rx;
};
#endif /* __LINUX_SERIAL_SCI_H */