mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
643c3024a5
Because the helper function which calls this callback checks whether it is registered or not. It is not necessary if it does nothing. So it would be better to remove the function for clarity. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
1796 lines
45 KiB
C
1796 lines
45 KiB
C
/*
|
|
* Samsung SoC MIPI DSI Master driver.
|
|
*
|
|
* Copyright (c) 2014 Samsung Electronics Co., Ltd
|
|
*
|
|
* Contacts: Tomasz Figa <t.figa@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/component.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
#include <video/videomode.h>
|
|
|
|
#include "exynos_drm_crtc.h"
|
|
#include "exynos_drm_drv.h"
|
|
|
|
/* returns true iff both arguments logically differs */
|
|
#define NEQV(a, b) (!(a) ^ !(b))
|
|
|
|
#define DSIM_STATUS_REG 0x0 /* Status register */
|
|
#define DSIM_SWRST_REG 0x4 /* Software reset register */
|
|
#define DSIM_CLKCTRL_REG 0x8 /* Clock control register */
|
|
#define DSIM_TIMEOUT_REG 0xc /* Time out register */
|
|
#define DSIM_CONFIG_REG 0x10 /* Configuration register */
|
|
#define DSIM_ESCMODE_REG 0x14 /* Escape mode register */
|
|
|
|
/* Main display image resolution register */
|
|
#define DSIM_MDRESOL_REG 0x18
|
|
#define DSIM_MVPORCH_REG 0x1c /* Main display Vporch register */
|
|
#define DSIM_MHPORCH_REG 0x20 /* Main display Hporch register */
|
|
#define DSIM_MSYNC_REG 0x24 /* Main display sync area register */
|
|
|
|
/* Sub display image resolution register */
|
|
#define DSIM_SDRESOL_REG 0x28
|
|
#define DSIM_INTSRC_REG 0x2c /* Interrupt source register */
|
|
#define DSIM_INTMSK_REG 0x30 /* Interrupt mask register */
|
|
#define DSIM_PKTHDR_REG 0x34 /* Packet Header FIFO register */
|
|
#define DSIM_PAYLOAD_REG 0x38 /* Payload FIFO register */
|
|
#define DSIM_RXFIFO_REG 0x3c /* Read FIFO register */
|
|
#define DSIM_FIFOTHLD_REG 0x40 /* FIFO threshold level register */
|
|
#define DSIM_FIFOCTRL_REG 0x44 /* FIFO status and control register */
|
|
|
|
/* FIFO memory AC characteristic register */
|
|
#define DSIM_PLLCTRL_REG 0x4c /* PLL control register */
|
|
#define DSIM_PHYACCHR_REG 0x54 /* D-PHY AC characteristic register */
|
|
#define DSIM_PHYACCHR1_REG 0x58 /* D-PHY AC characteristic register1 */
|
|
#define DSIM_PHYCTRL_REG 0x5c
|
|
#define DSIM_PHYTIMING_REG 0x64
|
|
#define DSIM_PHYTIMING1_REG 0x68
|
|
#define DSIM_PHYTIMING2_REG 0x6c
|
|
|
|
/* DSIM_STATUS */
|
|
#define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0)
|
|
#define DSIM_STOP_STATE_CLK (1 << 8)
|
|
#define DSIM_TX_READY_HS_CLK (1 << 10)
|
|
#define DSIM_PLL_STABLE (1 << 31)
|
|
|
|
/* DSIM_SWRST */
|
|
#define DSIM_FUNCRST (1 << 16)
|
|
#define DSIM_SWRST (1 << 0)
|
|
|
|
/* DSIM_TIMEOUT */
|
|
#define DSIM_LPDR_TIMEOUT(x) ((x) << 0)
|
|
#define DSIM_BTA_TIMEOUT(x) ((x) << 16)
|
|
|
|
/* DSIM_CLKCTRL */
|
|
#define DSIM_ESC_PRESCALER(x) (((x) & 0xffff) << 0)
|
|
#define DSIM_ESC_PRESCALER_MASK (0xffff << 0)
|
|
#define DSIM_LANE_ESC_CLK_EN_CLK (1 << 19)
|
|
#define DSIM_LANE_ESC_CLK_EN_DATA(x) (((x) & 0xf) << 20)
|
|
#define DSIM_LANE_ESC_CLK_EN_DATA_MASK (0xf << 20)
|
|
#define DSIM_BYTE_CLKEN (1 << 24)
|
|
#define DSIM_BYTE_CLK_SRC(x) (((x) & 0x3) << 25)
|
|
#define DSIM_BYTE_CLK_SRC_MASK (0x3 << 25)
|
|
#define DSIM_PLL_BYPASS (1 << 27)
|
|
#define DSIM_ESC_CLKEN (1 << 28)
|
|
#define DSIM_TX_REQUEST_HSCLK (1 << 31)
|
|
|
|
/* DSIM_CONFIG */
|
|
#define DSIM_LANE_EN_CLK (1 << 0)
|
|
#define DSIM_LANE_EN(x) (((x) & 0xf) << 1)
|
|
#define DSIM_NUM_OF_DATA_LANE(x) (((x) & 0x3) << 5)
|
|
#define DSIM_SUB_PIX_FORMAT(x) (((x) & 0x7) << 8)
|
|
#define DSIM_MAIN_PIX_FORMAT_MASK (0x7 << 12)
|
|
#define DSIM_MAIN_PIX_FORMAT_RGB888 (0x7 << 12)
|
|
#define DSIM_MAIN_PIX_FORMAT_RGB666 (0x6 << 12)
|
|
#define DSIM_MAIN_PIX_FORMAT_RGB666_P (0x5 << 12)
|
|
#define DSIM_MAIN_PIX_FORMAT_RGB565 (0x4 << 12)
|
|
#define DSIM_SUB_VC (((x) & 0x3) << 16)
|
|
#define DSIM_MAIN_VC (((x) & 0x3) << 18)
|
|
#define DSIM_HSA_MODE (1 << 20)
|
|
#define DSIM_HBP_MODE (1 << 21)
|
|
#define DSIM_HFP_MODE (1 << 22)
|
|
#define DSIM_HSE_MODE (1 << 23)
|
|
#define DSIM_AUTO_MODE (1 << 24)
|
|
#define DSIM_VIDEO_MODE (1 << 25)
|
|
#define DSIM_BURST_MODE (1 << 26)
|
|
#define DSIM_SYNC_INFORM (1 << 27)
|
|
#define DSIM_EOT_DISABLE (1 << 28)
|
|
#define DSIM_MFLUSH_VS (1 << 29)
|
|
/* This flag is valid only for exynos3250/3472/4415/5260/5430 */
|
|
#define DSIM_CLKLANE_STOP (1 << 30)
|
|
|
|
/* DSIM_ESCMODE */
|
|
#define DSIM_TX_TRIGGER_RST (1 << 4)
|
|
#define DSIM_TX_LPDT_LP (1 << 6)
|
|
#define DSIM_CMD_LPDT_LP (1 << 7)
|
|
#define DSIM_FORCE_BTA (1 << 16)
|
|
#define DSIM_FORCE_STOP_STATE (1 << 20)
|
|
#define DSIM_STOP_STATE_CNT(x) (((x) & 0x7ff) << 21)
|
|
#define DSIM_STOP_STATE_CNT_MASK (0x7ff << 21)
|
|
|
|
/* DSIM_MDRESOL */
|
|
#define DSIM_MAIN_STAND_BY (1 << 31)
|
|
#define DSIM_MAIN_VRESOL(x) (((x) & 0x7ff) << 16)
|
|
#define DSIM_MAIN_HRESOL(x) (((x) & 0X7ff) << 0)
|
|
|
|
/* DSIM_MVPORCH */
|
|
#define DSIM_CMD_ALLOW(x) ((x) << 28)
|
|
#define DSIM_STABLE_VFP(x) ((x) << 16)
|
|
#define DSIM_MAIN_VBP(x) ((x) << 0)
|
|
#define DSIM_CMD_ALLOW_MASK (0xf << 28)
|
|
#define DSIM_STABLE_VFP_MASK (0x7ff << 16)
|
|
#define DSIM_MAIN_VBP_MASK (0x7ff << 0)
|
|
|
|
/* DSIM_MHPORCH */
|
|
#define DSIM_MAIN_HFP(x) ((x) << 16)
|
|
#define DSIM_MAIN_HBP(x) ((x) << 0)
|
|
#define DSIM_MAIN_HFP_MASK ((0xffff) << 16)
|
|
#define DSIM_MAIN_HBP_MASK ((0xffff) << 0)
|
|
|
|
/* DSIM_MSYNC */
|
|
#define DSIM_MAIN_VSA(x) ((x) << 22)
|
|
#define DSIM_MAIN_HSA(x) ((x) << 0)
|
|
#define DSIM_MAIN_VSA_MASK ((0x3ff) << 22)
|
|
#define DSIM_MAIN_HSA_MASK ((0xffff) << 0)
|
|
|
|
/* DSIM_SDRESOL */
|
|
#define DSIM_SUB_STANDY(x) ((x) << 31)
|
|
#define DSIM_SUB_VRESOL(x) ((x) << 16)
|
|
#define DSIM_SUB_HRESOL(x) ((x) << 0)
|
|
#define DSIM_SUB_STANDY_MASK ((0x1) << 31)
|
|
#define DSIM_SUB_VRESOL_MASK ((0x7ff) << 16)
|
|
#define DSIM_SUB_HRESOL_MASK ((0x7ff) << 0)
|
|
|
|
/* DSIM_INTSRC */
|
|
#define DSIM_INT_PLL_STABLE (1 << 31)
|
|
#define DSIM_INT_SW_RST_RELEASE (1 << 30)
|
|
#define DSIM_INT_SFR_FIFO_EMPTY (1 << 29)
|
|
#define DSIM_INT_BTA (1 << 25)
|
|
#define DSIM_INT_FRAME_DONE (1 << 24)
|
|
#define DSIM_INT_RX_TIMEOUT (1 << 21)
|
|
#define DSIM_INT_BTA_TIMEOUT (1 << 20)
|
|
#define DSIM_INT_RX_DONE (1 << 18)
|
|
#define DSIM_INT_RX_TE (1 << 17)
|
|
#define DSIM_INT_RX_ACK (1 << 16)
|
|
#define DSIM_INT_RX_ECC_ERR (1 << 15)
|
|
#define DSIM_INT_RX_CRC_ERR (1 << 14)
|
|
|
|
/* DSIM_FIFOCTRL */
|
|
#define DSIM_RX_DATA_FULL (1 << 25)
|
|
#define DSIM_RX_DATA_EMPTY (1 << 24)
|
|
#define DSIM_SFR_HEADER_FULL (1 << 23)
|
|
#define DSIM_SFR_HEADER_EMPTY (1 << 22)
|
|
#define DSIM_SFR_PAYLOAD_FULL (1 << 21)
|
|
#define DSIM_SFR_PAYLOAD_EMPTY (1 << 20)
|
|
#define DSIM_I80_HEADER_FULL (1 << 19)
|
|
#define DSIM_I80_HEADER_EMPTY (1 << 18)
|
|
#define DSIM_I80_PAYLOAD_FULL (1 << 17)
|
|
#define DSIM_I80_PAYLOAD_EMPTY (1 << 16)
|
|
#define DSIM_SD_HEADER_FULL (1 << 15)
|
|
#define DSIM_SD_HEADER_EMPTY (1 << 14)
|
|
#define DSIM_SD_PAYLOAD_FULL (1 << 13)
|
|
#define DSIM_SD_PAYLOAD_EMPTY (1 << 12)
|
|
#define DSIM_MD_HEADER_FULL (1 << 11)
|
|
#define DSIM_MD_HEADER_EMPTY (1 << 10)
|
|
#define DSIM_MD_PAYLOAD_FULL (1 << 9)
|
|
#define DSIM_MD_PAYLOAD_EMPTY (1 << 8)
|
|
#define DSIM_RX_FIFO (1 << 4)
|
|
#define DSIM_SFR_FIFO (1 << 3)
|
|
#define DSIM_I80_FIFO (1 << 2)
|
|
#define DSIM_SD_FIFO (1 << 1)
|
|
#define DSIM_MD_FIFO (1 << 0)
|
|
|
|
/* DSIM_PHYACCHR */
|
|
#define DSIM_AFC_EN (1 << 14)
|
|
#define DSIM_AFC_CTL(x) (((x) & 0x7) << 5)
|
|
|
|
/* DSIM_PLLCTRL */
|
|
#define DSIM_FREQ_BAND(x) ((x) << 24)
|
|
#define DSIM_PLL_EN (1 << 23)
|
|
#define DSIM_PLL_P(x) ((x) << 13)
|
|
#define DSIM_PLL_M(x) ((x) << 4)
|
|
#define DSIM_PLL_S(x) ((x) << 1)
|
|
|
|
/* DSIM_PHYCTRL */
|
|
#define DSIM_PHYCTRL_ULPS_EXIT(x) (((x) & 0x1ff) << 0)
|
|
|
|
/* DSIM_PHYTIMING */
|
|
#define DSIM_PHYTIMING_LPX(x) ((x) << 8)
|
|
#define DSIM_PHYTIMING_HS_EXIT(x) ((x) << 0)
|
|
|
|
/* DSIM_PHYTIMING1 */
|
|
#define DSIM_PHYTIMING1_CLK_PREPARE(x) ((x) << 24)
|
|
#define DSIM_PHYTIMING1_CLK_ZERO(x) ((x) << 16)
|
|
#define DSIM_PHYTIMING1_CLK_POST(x) ((x) << 8)
|
|
#define DSIM_PHYTIMING1_CLK_TRAIL(x) ((x) << 0)
|
|
|
|
/* DSIM_PHYTIMING2 */
|
|
#define DSIM_PHYTIMING2_HS_PREPARE(x) ((x) << 16)
|
|
#define DSIM_PHYTIMING2_HS_ZERO(x) ((x) << 8)
|
|
#define DSIM_PHYTIMING2_HS_TRAIL(x) ((x) << 0)
|
|
|
|
#define DSI_MAX_BUS_WIDTH 4
|
|
#define DSI_NUM_VIRTUAL_CHANNELS 4
|
|
#define DSI_TX_FIFO_SIZE 2048
|
|
#define DSI_RX_FIFO_SIZE 256
|
|
#define DSI_XFER_TIMEOUT_MS 100
|
|
#define DSI_RX_FIFO_EMPTY 0x30800002
|
|
|
|
enum exynos_dsi_transfer_type {
|
|
EXYNOS_DSI_TX,
|
|
EXYNOS_DSI_RX,
|
|
};
|
|
|
|
struct exynos_dsi_transfer {
|
|
struct list_head list;
|
|
struct completion completed;
|
|
int result;
|
|
u8 data_id;
|
|
u8 data[2];
|
|
u16 flags;
|
|
|
|
const u8 *tx_payload;
|
|
u16 tx_len;
|
|
u16 tx_done;
|
|
|
|
u8 *rx_payload;
|
|
u16 rx_len;
|
|
u16 rx_done;
|
|
};
|
|
|
|
#define DSIM_STATE_ENABLED BIT(0)
|
|
#define DSIM_STATE_INITIALIZED BIT(1)
|
|
#define DSIM_STATE_CMD_LPM BIT(2)
|
|
|
|
struct exynos_dsi_driver_data {
|
|
unsigned int plltmr_reg;
|
|
|
|
unsigned int has_freqband:1;
|
|
unsigned int has_clklane_stop:1;
|
|
};
|
|
|
|
struct exynos_dsi {
|
|
struct exynos_drm_display display;
|
|
struct mipi_dsi_host dsi_host;
|
|
struct drm_connector connector;
|
|
struct device_node *panel_node;
|
|
struct drm_panel *panel;
|
|
struct device *dev;
|
|
|
|
void __iomem *reg_base;
|
|
struct phy *phy;
|
|
struct clk *pll_clk;
|
|
struct clk *bus_clk;
|
|
struct regulator_bulk_data supplies[2];
|
|
int irq;
|
|
int te_gpio;
|
|
|
|
u32 pll_clk_rate;
|
|
u32 burst_clk_rate;
|
|
u32 esc_clk_rate;
|
|
u32 lanes;
|
|
u32 mode_flags;
|
|
u32 format;
|
|
struct videomode vm;
|
|
|
|
int state;
|
|
struct drm_property *brightness;
|
|
struct completion completed;
|
|
|
|
spinlock_t transfer_lock; /* protects transfer_list */
|
|
struct list_head transfer_list;
|
|
|
|
struct exynos_dsi_driver_data *driver_data;
|
|
};
|
|
|
|
#define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
|
|
#define connector_to_dsi(c) container_of(c, struct exynos_dsi, connector)
|
|
|
|
static inline struct exynos_dsi *display_to_dsi(struct exynos_drm_display *d)
|
|
{
|
|
return container_of(d, struct exynos_dsi, display);
|
|
}
|
|
|
|
static struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
|
|
.plltmr_reg = 0x50,
|
|
.has_freqband = 1,
|
|
.has_clklane_stop = 1,
|
|
};
|
|
|
|
static struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
|
|
.plltmr_reg = 0x50,
|
|
.has_freqband = 1,
|
|
.has_clklane_stop = 1,
|
|
};
|
|
|
|
static struct exynos_dsi_driver_data exynos4415_dsi_driver_data = {
|
|
.plltmr_reg = 0x58,
|
|
.has_clklane_stop = 1,
|
|
};
|
|
|
|
static struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
|
|
.plltmr_reg = 0x58,
|
|
};
|
|
|
|
static struct of_device_id exynos_dsi_of_match[] = {
|
|
{ .compatible = "samsung,exynos3250-mipi-dsi",
|
|
.data = &exynos3_dsi_driver_data },
|
|
{ .compatible = "samsung,exynos4210-mipi-dsi",
|
|
.data = &exynos4_dsi_driver_data },
|
|
{ .compatible = "samsung,exynos4415-mipi-dsi",
|
|
.data = &exynos4415_dsi_driver_data },
|
|
{ .compatible = "samsung,exynos5410-mipi-dsi",
|
|
.data = &exynos5_dsi_driver_data },
|
|
{ }
|
|
};
|
|
|
|
static inline struct exynos_dsi_driver_data *exynos_dsi_get_driver_data(
|
|
struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id =
|
|
of_match_device(exynos_dsi_of_match, &pdev->dev);
|
|
|
|
return (struct exynos_dsi_driver_data *)of_id->data;
|
|
}
|
|
|
|
static void exynos_dsi_wait_for_reset(struct exynos_dsi *dsi)
|
|
{
|
|
if (wait_for_completion_timeout(&dsi->completed, msecs_to_jiffies(300)))
|
|
return;
|
|
|
|
dev_err(dsi->dev, "timeout waiting for reset\n");
|
|
}
|
|
|
|
static void exynos_dsi_reset(struct exynos_dsi *dsi)
|
|
{
|
|
reinit_completion(&dsi->completed);
|
|
writel(DSIM_SWRST, dsi->reg_base + DSIM_SWRST_REG);
|
|
}
|
|
|
|
#ifndef MHZ
|
|
#define MHZ (1000*1000)
|
|
#endif
|
|
|
|
static unsigned long exynos_dsi_pll_find_pms(struct exynos_dsi *dsi,
|
|
unsigned long fin, unsigned long fout, u8 *p, u16 *m, u8 *s)
|
|
{
|
|
unsigned long best_freq = 0;
|
|
u32 min_delta = 0xffffffff;
|
|
u8 p_min, p_max;
|
|
u8 _p, uninitialized_var(best_p);
|
|
u16 _m, uninitialized_var(best_m);
|
|
u8 _s, uninitialized_var(best_s);
|
|
|
|
p_min = DIV_ROUND_UP(fin, (12 * MHZ));
|
|
p_max = fin / (6 * MHZ);
|
|
|
|
for (_p = p_min; _p <= p_max; ++_p) {
|
|
for (_s = 0; _s <= 5; ++_s) {
|
|
u64 tmp;
|
|
u32 delta;
|
|
|
|
tmp = (u64)fout * (_p << _s);
|
|
do_div(tmp, fin);
|
|
_m = tmp;
|
|
if (_m < 41 || _m > 125)
|
|
continue;
|
|
|
|
tmp = (u64)_m * fin;
|
|
do_div(tmp, _p);
|
|
if (tmp < 500 * MHZ || tmp > 1000 * MHZ)
|
|
continue;
|
|
|
|
tmp = (u64)_m * fin;
|
|
do_div(tmp, _p << _s);
|
|
|
|
delta = abs(fout - tmp);
|
|
if (delta < min_delta) {
|
|
best_p = _p;
|
|
best_m = _m;
|
|
best_s = _s;
|
|
min_delta = delta;
|
|
best_freq = tmp;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (best_freq) {
|
|
*p = best_p;
|
|
*m = best_m;
|
|
*s = best_s;
|
|
}
|
|
|
|
return best_freq;
|
|
}
|
|
|
|
static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
|
|
unsigned long freq)
|
|
{
|
|
struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
|
|
unsigned long fin, fout;
|
|
int timeout;
|
|
u8 p, s;
|
|
u16 m;
|
|
u32 reg;
|
|
|
|
clk_set_rate(dsi->pll_clk, dsi->pll_clk_rate);
|
|
|
|
fin = clk_get_rate(dsi->pll_clk);
|
|
if (!fin) {
|
|
dev_err(dsi->dev, "failed to get PLL clock frequency\n");
|
|
return 0;
|
|
}
|
|
|
|
dev_dbg(dsi->dev, "PLL input frequency: %lu\n", fin);
|
|
|
|
fout = exynos_dsi_pll_find_pms(dsi, fin, freq, &p, &m, &s);
|
|
if (!fout) {
|
|
dev_err(dsi->dev,
|
|
"failed to find PLL PMS for requested frequency\n");
|
|
return 0;
|
|
}
|
|
dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
|
|
|
|
writel(500, dsi->reg_base + driver_data->plltmr_reg);
|
|
|
|
reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
|
|
|
|
if (driver_data->has_freqband) {
|
|
static const unsigned long freq_bands[] = {
|
|
100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
|
|
270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
|
|
510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
|
|
770 * MHZ, 870 * MHZ, 950 * MHZ,
|
|
};
|
|
int band;
|
|
|
|
for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
|
|
if (fout < freq_bands[band])
|
|
break;
|
|
|
|
dev_dbg(dsi->dev, "band %d\n", band);
|
|
|
|
reg |= DSIM_FREQ_BAND(band);
|
|
}
|
|
|
|
writel(reg, dsi->reg_base + DSIM_PLLCTRL_REG);
|
|
|
|
timeout = 1000;
|
|
do {
|
|
if (timeout-- == 0) {
|
|
dev_err(dsi->dev, "PLL failed to stabilize\n");
|
|
return 0;
|
|
}
|
|
reg = readl(dsi->reg_base + DSIM_STATUS_REG);
|
|
} while ((reg & DSIM_PLL_STABLE) == 0);
|
|
|
|
return fout;
|
|
}
|
|
|
|
static int exynos_dsi_enable_clock(struct exynos_dsi *dsi)
|
|
{
|
|
unsigned long hs_clk, byte_clk, esc_clk;
|
|
unsigned long esc_div;
|
|
u32 reg;
|
|
|
|
hs_clk = exynos_dsi_set_pll(dsi, dsi->burst_clk_rate);
|
|
if (!hs_clk) {
|
|
dev_err(dsi->dev, "failed to configure DSI PLL\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
byte_clk = hs_clk / 8;
|
|
esc_div = DIV_ROUND_UP(byte_clk, dsi->esc_clk_rate);
|
|
esc_clk = byte_clk / esc_div;
|
|
|
|
if (esc_clk > 20 * MHZ) {
|
|
++esc_div;
|
|
esc_clk = byte_clk / esc_div;
|
|
}
|
|
|
|
dev_dbg(dsi->dev, "hs_clk = %lu, byte_clk = %lu, esc_clk = %lu\n",
|
|
hs_clk, byte_clk, esc_clk);
|
|
|
|
reg = readl(dsi->reg_base + DSIM_CLKCTRL_REG);
|
|
reg &= ~(DSIM_ESC_PRESCALER_MASK | DSIM_LANE_ESC_CLK_EN_CLK
|
|
| DSIM_LANE_ESC_CLK_EN_DATA_MASK | DSIM_PLL_BYPASS
|
|
| DSIM_BYTE_CLK_SRC_MASK);
|
|
reg |= DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN
|
|
| DSIM_ESC_PRESCALER(esc_div)
|
|
| DSIM_LANE_ESC_CLK_EN_CLK
|
|
| DSIM_LANE_ESC_CLK_EN_DATA(BIT(dsi->lanes) - 1)
|
|
| DSIM_BYTE_CLK_SRC(0)
|
|
| DSIM_TX_REQUEST_HSCLK;
|
|
writel(reg, dsi->reg_base + DSIM_CLKCTRL_REG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
|
|
{
|
|
struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
|
|
u32 reg;
|
|
|
|
if (driver_data->has_freqband)
|
|
return;
|
|
|
|
/* B D-PHY: D-PHY Master & Slave Analog Block control */
|
|
reg = DSIM_PHYCTRL_ULPS_EXIT(0x0af);
|
|
writel(reg, dsi->reg_base + DSIM_PHYCTRL_REG);
|
|
|
|
/*
|
|
* T LPX: Transmitted length of any Low-Power state period
|
|
* T HS-EXIT: Time that the transmitter drives LP-11 following a HS
|
|
* burst
|
|
*/
|
|
reg = DSIM_PHYTIMING_LPX(0x06) | DSIM_PHYTIMING_HS_EXIT(0x0b);
|
|
writel(reg, dsi->reg_base + DSIM_PHYTIMING_REG);
|
|
|
|
/*
|
|
* T CLK-PREPARE: Time that the transmitter drives the Clock Lane LP-00
|
|
* Line state immediately before the HS-0 Line state starting the
|
|
* HS transmission
|
|
* T CLK-ZERO: Time that the transmitter drives the HS-0 state prior to
|
|
* transmitting the Clock.
|
|
* T CLK_POST: Time that the transmitter continues to send HS clock
|
|
* after the last associated Data Lane has transitioned to LP Mode
|
|
* Interval is defined as the period from the end of T HS-TRAIL to
|
|
* the beginning of T CLK-TRAIL
|
|
* T CLK-TRAIL: Time that the transmitter drives the HS-0 state after
|
|
* the last payload clock bit of a HS transmission burst
|
|
*/
|
|
reg = DSIM_PHYTIMING1_CLK_PREPARE(0x07) |
|
|
DSIM_PHYTIMING1_CLK_ZERO(0x27) |
|
|
DSIM_PHYTIMING1_CLK_POST(0x0d) |
|
|
DSIM_PHYTIMING1_CLK_TRAIL(0x08);
|
|
writel(reg, dsi->reg_base + DSIM_PHYTIMING1_REG);
|
|
|
|
/*
|
|
* T HS-PREPARE: Time that the transmitter drives the Data Lane LP-00
|
|
* Line state immediately before the HS-0 Line state starting the
|
|
* HS transmission
|
|
* T HS-ZERO: Time that the transmitter drives the HS-0 state prior to
|
|
* transmitting the Sync sequence.
|
|
* T HS-TRAIL: Time that the transmitter drives the flipped differential
|
|
* state after last payload data bit of a HS transmission burst
|
|
*/
|
|
reg = DSIM_PHYTIMING2_HS_PREPARE(0x09) | DSIM_PHYTIMING2_HS_ZERO(0x0d) |
|
|
DSIM_PHYTIMING2_HS_TRAIL(0x0b);
|
|
writel(reg, dsi->reg_base + DSIM_PHYTIMING2_REG);
|
|
}
|
|
|
|
static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(dsi->reg_base + DSIM_CLKCTRL_REG);
|
|
reg &= ~(DSIM_LANE_ESC_CLK_EN_CLK | DSIM_LANE_ESC_CLK_EN_DATA_MASK
|
|
| DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN);
|
|
writel(reg, dsi->reg_base + DSIM_CLKCTRL_REG);
|
|
|
|
reg = readl(dsi->reg_base + DSIM_PLLCTRL_REG);
|
|
reg &= ~DSIM_PLL_EN;
|
|
writel(reg, dsi->reg_base + DSIM_PLLCTRL_REG);
|
|
}
|
|
|
|
static int exynos_dsi_init_link(struct exynos_dsi *dsi)
|
|
{
|
|
struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
|
|
int timeout;
|
|
u32 reg;
|
|
u32 lanes_mask;
|
|
|
|
/* Initialize FIFO pointers */
|
|
reg = readl(dsi->reg_base + DSIM_FIFOCTRL_REG);
|
|
reg &= ~0x1f;
|
|
writel(reg, dsi->reg_base + DSIM_FIFOCTRL_REG);
|
|
|
|
usleep_range(9000, 11000);
|
|
|
|
reg |= 0x1f;
|
|
writel(reg, dsi->reg_base + DSIM_FIFOCTRL_REG);
|
|
|
|
usleep_range(9000, 11000);
|
|
|
|
/* DSI configuration */
|
|
reg = 0;
|
|
|
|
/*
|
|
* The first bit of mode_flags specifies display configuration.
|
|
* If this bit is set[= MIPI_DSI_MODE_VIDEO], dsi will support video
|
|
* mode, otherwise it will support command mode.
|
|
*/
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
|
|
reg |= DSIM_VIDEO_MODE;
|
|
|
|
/*
|
|
* The user manual describes that following bits are ignored in
|
|
* command mode.
|
|
*/
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_VSYNC_FLUSH))
|
|
reg |= DSIM_MFLUSH_VS;
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
|
|
reg |= DSIM_SYNC_INFORM;
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
|
|
reg |= DSIM_BURST_MODE;
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_AUTO_VERT)
|
|
reg |= DSIM_AUTO_MODE;
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HSE)
|
|
reg |= DSIM_HSE_MODE;
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HFP))
|
|
reg |= DSIM_HFP_MODE;
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HBP))
|
|
reg |= DSIM_HBP_MODE;
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HSA))
|
|
reg |= DSIM_HSA_MODE;
|
|
}
|
|
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_EOT_PACKET))
|
|
reg |= DSIM_EOT_DISABLE;
|
|
|
|
switch (dsi->format) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
reg |= DSIM_MAIN_PIX_FORMAT_RGB888;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB666:
|
|
reg |= DSIM_MAIN_PIX_FORMAT_RGB666;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB666_PACKED:
|
|
reg |= DSIM_MAIN_PIX_FORMAT_RGB666_P;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB565:
|
|
reg |= DSIM_MAIN_PIX_FORMAT_RGB565;
|
|
break;
|
|
default:
|
|
dev_err(dsi->dev, "invalid pixel format\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg |= DSIM_NUM_OF_DATA_LANE(dsi->lanes - 1);
|
|
|
|
writel(reg, dsi->reg_base + DSIM_CONFIG_REG);
|
|
|
|
reg |= DSIM_LANE_EN_CLK;
|
|
writel(reg, dsi->reg_base + DSIM_CONFIG_REG);
|
|
|
|
lanes_mask = BIT(dsi->lanes) - 1;
|
|
reg |= DSIM_LANE_EN(lanes_mask);
|
|
writel(reg, dsi->reg_base + DSIM_CONFIG_REG);
|
|
|
|
/*
|
|
* Use non-continuous clock mode if the periparal wants and
|
|
* host controller supports
|
|
*
|
|
* In non-continous clock mode, host controller will turn off
|
|
* the HS clock between high-speed transmissions to reduce
|
|
* power consumption.
|
|
*/
|
|
if (driver_data->has_clklane_stop &&
|
|
dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
|
|
reg |= DSIM_CLKLANE_STOP;
|
|
writel(reg, dsi->reg_base + DSIM_CONFIG_REG);
|
|
}
|
|
|
|
/* Check clock and data lane state are stop state */
|
|
timeout = 100;
|
|
do {
|
|
if (timeout-- == 0) {
|
|
dev_err(dsi->dev, "waiting for bus lanes timed out\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
reg = readl(dsi->reg_base + DSIM_STATUS_REG);
|
|
if ((reg & DSIM_STOP_STATE_DAT(lanes_mask))
|
|
!= DSIM_STOP_STATE_DAT(lanes_mask))
|
|
continue;
|
|
} while (!(reg & (DSIM_STOP_STATE_CLK | DSIM_TX_READY_HS_CLK)));
|
|
|
|
reg = readl(dsi->reg_base + DSIM_ESCMODE_REG);
|
|
reg &= ~DSIM_STOP_STATE_CNT_MASK;
|
|
reg |= DSIM_STOP_STATE_CNT(0xf);
|
|
writel(reg, dsi->reg_base + DSIM_ESCMODE_REG);
|
|
|
|
reg = DSIM_BTA_TIMEOUT(0xff) | DSIM_LPDR_TIMEOUT(0xffff);
|
|
writel(reg, dsi->reg_base + DSIM_TIMEOUT_REG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos_dsi_set_display_mode(struct exynos_dsi *dsi)
|
|
{
|
|
struct videomode *vm = &dsi->vm;
|
|
u32 reg;
|
|
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
|
|
reg = DSIM_CMD_ALLOW(0xf)
|
|
| DSIM_STABLE_VFP(vm->vfront_porch)
|
|
| DSIM_MAIN_VBP(vm->vback_porch);
|
|
writel(reg, dsi->reg_base + DSIM_MVPORCH_REG);
|
|
|
|
reg = DSIM_MAIN_HFP(vm->hfront_porch)
|
|
| DSIM_MAIN_HBP(vm->hback_porch);
|
|
writel(reg, dsi->reg_base + DSIM_MHPORCH_REG);
|
|
|
|
reg = DSIM_MAIN_VSA(vm->vsync_len)
|
|
| DSIM_MAIN_HSA(vm->hsync_len);
|
|
writel(reg, dsi->reg_base + DSIM_MSYNC_REG);
|
|
}
|
|
|
|
reg = DSIM_MAIN_HRESOL(vm->hactive) | DSIM_MAIN_VRESOL(vm->vactive);
|
|
writel(reg, dsi->reg_base + DSIM_MDRESOL_REG);
|
|
|
|
dev_dbg(dsi->dev, "LCD size = %dx%d\n", vm->hactive, vm->vactive);
|
|
}
|
|
|
|
static void exynos_dsi_set_display_enable(struct exynos_dsi *dsi, bool enable)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(dsi->reg_base + DSIM_MDRESOL_REG);
|
|
if (enable)
|
|
reg |= DSIM_MAIN_STAND_BY;
|
|
else
|
|
reg &= ~DSIM_MAIN_STAND_BY;
|
|
writel(reg, dsi->reg_base + DSIM_MDRESOL_REG);
|
|
}
|
|
|
|
static int exynos_dsi_wait_for_hdr_fifo(struct exynos_dsi *dsi)
|
|
{
|
|
int timeout = 2000;
|
|
|
|
do {
|
|
u32 reg = readl(dsi->reg_base + DSIM_FIFOCTRL_REG);
|
|
|
|
if (!(reg & DSIM_SFR_HEADER_FULL))
|
|
return 0;
|
|
|
|
if (!cond_resched())
|
|
usleep_range(950, 1050);
|
|
} while (--timeout);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void exynos_dsi_set_cmd_lpm(struct exynos_dsi *dsi, bool lpm)
|
|
{
|
|
u32 v = readl(dsi->reg_base + DSIM_ESCMODE_REG);
|
|
|
|
if (lpm)
|
|
v |= DSIM_CMD_LPDT_LP;
|
|
else
|
|
v &= ~DSIM_CMD_LPDT_LP;
|
|
|
|
writel(v, dsi->reg_base + DSIM_ESCMODE_REG);
|
|
}
|
|
|
|
static void exynos_dsi_force_bta(struct exynos_dsi *dsi)
|
|
{
|
|
u32 v = readl(dsi->reg_base + DSIM_ESCMODE_REG);
|
|
|
|
v |= DSIM_FORCE_BTA;
|
|
writel(v, dsi->reg_base + DSIM_ESCMODE_REG);
|
|
}
|
|
|
|
static void exynos_dsi_send_to_fifo(struct exynos_dsi *dsi,
|
|
struct exynos_dsi_transfer *xfer)
|
|
{
|
|
struct device *dev = dsi->dev;
|
|
const u8 *payload = xfer->tx_payload + xfer->tx_done;
|
|
u16 length = xfer->tx_len - xfer->tx_done;
|
|
bool first = !xfer->tx_done;
|
|
u32 reg;
|
|
|
|
dev_dbg(dev, "< xfer %p: tx len %u, done %u, rx len %u, done %u\n",
|
|
xfer, xfer->tx_len, xfer->tx_done, xfer->rx_len, xfer->rx_done);
|
|
|
|
if (length > DSI_TX_FIFO_SIZE)
|
|
length = DSI_TX_FIFO_SIZE;
|
|
|
|
xfer->tx_done += length;
|
|
|
|
/* Send payload */
|
|
while (length >= 4) {
|
|
reg = (payload[3] << 24) | (payload[2] << 16)
|
|
| (payload[1] << 8) | payload[0];
|
|
writel(reg, dsi->reg_base + DSIM_PAYLOAD_REG);
|
|
payload += 4;
|
|
length -= 4;
|
|
}
|
|
|
|
reg = 0;
|
|
switch (length) {
|
|
case 3:
|
|
reg |= payload[2] << 16;
|
|
/* Fall through */
|
|
case 2:
|
|
reg |= payload[1] << 8;
|
|
/* Fall through */
|
|
case 1:
|
|
reg |= payload[0];
|
|
writel(reg, dsi->reg_base + DSIM_PAYLOAD_REG);
|
|
break;
|
|
case 0:
|
|
/* Do nothing */
|
|
break;
|
|
}
|
|
|
|
/* Send packet header */
|
|
if (!first)
|
|
return;
|
|
|
|
reg = (xfer->data[1] << 16) | (xfer->data[0] << 8) | xfer->data_id;
|
|
if (exynos_dsi_wait_for_hdr_fifo(dsi)) {
|
|
dev_err(dev, "waiting for header FIFO timed out\n");
|
|
return;
|
|
}
|
|
|
|
if (NEQV(xfer->flags & MIPI_DSI_MSG_USE_LPM,
|
|
dsi->state & DSIM_STATE_CMD_LPM)) {
|
|
exynos_dsi_set_cmd_lpm(dsi, xfer->flags & MIPI_DSI_MSG_USE_LPM);
|
|
dsi->state ^= DSIM_STATE_CMD_LPM;
|
|
}
|
|
|
|
writel(reg, dsi->reg_base + DSIM_PKTHDR_REG);
|
|
|
|
if (xfer->flags & MIPI_DSI_MSG_REQ_ACK)
|
|
exynos_dsi_force_bta(dsi);
|
|
}
|
|
|
|
static void exynos_dsi_read_from_fifo(struct exynos_dsi *dsi,
|
|
struct exynos_dsi_transfer *xfer)
|
|
{
|
|
u8 *payload = xfer->rx_payload + xfer->rx_done;
|
|
bool first = !xfer->rx_done;
|
|
struct device *dev = dsi->dev;
|
|
u16 length;
|
|
u32 reg;
|
|
|
|
if (first) {
|
|
reg = readl(dsi->reg_base + DSIM_RXFIFO_REG);
|
|
|
|
switch (reg & 0x3f) {
|
|
case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
|
|
case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
|
|
if (xfer->rx_len >= 2) {
|
|
payload[1] = reg >> 16;
|
|
++xfer->rx_done;
|
|
}
|
|
/* Fall through */
|
|
case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
|
|
case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
|
|
payload[0] = reg >> 8;
|
|
++xfer->rx_done;
|
|
xfer->rx_len = xfer->rx_done;
|
|
xfer->result = 0;
|
|
goto clear_fifo;
|
|
case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
|
|
dev_err(dev, "DSI Error Report: 0x%04x\n",
|
|
(reg >> 8) & 0xffff);
|
|
xfer->result = 0;
|
|
goto clear_fifo;
|
|
}
|
|
|
|
length = (reg >> 8) & 0xffff;
|
|
if (length > xfer->rx_len) {
|
|
dev_err(dev,
|
|
"response too long (%u > %u bytes), stripping\n",
|
|
xfer->rx_len, length);
|
|
length = xfer->rx_len;
|
|
} else if (length < xfer->rx_len)
|
|
xfer->rx_len = length;
|
|
}
|
|
|
|
length = xfer->rx_len - xfer->rx_done;
|
|
xfer->rx_done += length;
|
|
|
|
/* Receive payload */
|
|
while (length >= 4) {
|
|
reg = readl(dsi->reg_base + DSIM_RXFIFO_REG);
|
|
payload[0] = (reg >> 0) & 0xff;
|
|
payload[1] = (reg >> 8) & 0xff;
|
|
payload[2] = (reg >> 16) & 0xff;
|
|
payload[3] = (reg >> 24) & 0xff;
|
|
payload += 4;
|
|
length -= 4;
|
|
}
|
|
|
|
if (length) {
|
|
reg = readl(dsi->reg_base + DSIM_RXFIFO_REG);
|
|
switch (length) {
|
|
case 3:
|
|
payload[2] = (reg >> 16) & 0xff;
|
|
/* Fall through */
|
|
case 2:
|
|
payload[1] = (reg >> 8) & 0xff;
|
|
/* Fall through */
|
|
case 1:
|
|
payload[0] = reg & 0xff;
|
|
}
|
|
}
|
|
|
|
if (xfer->rx_done == xfer->rx_len)
|
|
xfer->result = 0;
|
|
|
|
clear_fifo:
|
|
length = DSI_RX_FIFO_SIZE / 4;
|
|
do {
|
|
reg = readl(dsi->reg_base + DSIM_RXFIFO_REG);
|
|
if (reg == DSI_RX_FIFO_EMPTY)
|
|
break;
|
|
} while (--length);
|
|
}
|
|
|
|
static void exynos_dsi_transfer_start(struct exynos_dsi *dsi)
|
|
{
|
|
unsigned long flags;
|
|
struct exynos_dsi_transfer *xfer;
|
|
bool start = false;
|
|
|
|
again:
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
if (list_empty(&dsi->transfer_list)) {
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
return;
|
|
}
|
|
|
|
xfer = list_first_entry(&dsi->transfer_list,
|
|
struct exynos_dsi_transfer, list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
|
|
if (xfer->tx_len && xfer->tx_done == xfer->tx_len)
|
|
/* waiting for RX */
|
|
return;
|
|
|
|
exynos_dsi_send_to_fifo(dsi, xfer);
|
|
|
|
if (xfer->tx_len || xfer->rx_len)
|
|
return;
|
|
|
|
xfer->result = 0;
|
|
complete(&xfer->completed);
|
|
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
list_del_init(&xfer->list);
|
|
start = !list_empty(&dsi->transfer_list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
|
|
if (start)
|
|
goto again;
|
|
}
|
|
|
|
static bool exynos_dsi_transfer_finish(struct exynos_dsi *dsi)
|
|
{
|
|
struct exynos_dsi_transfer *xfer;
|
|
unsigned long flags;
|
|
bool start = true;
|
|
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
if (list_empty(&dsi->transfer_list)) {
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
return false;
|
|
}
|
|
|
|
xfer = list_first_entry(&dsi->transfer_list,
|
|
struct exynos_dsi_transfer, list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
|
|
dev_dbg(dsi->dev,
|
|
"> xfer %p, tx_len %u, tx_done %u, rx_len %u, rx_done %u\n",
|
|
xfer, xfer->tx_len, xfer->tx_done, xfer->rx_len, xfer->rx_done);
|
|
|
|
if (xfer->tx_done != xfer->tx_len)
|
|
return true;
|
|
|
|
if (xfer->rx_done != xfer->rx_len)
|
|
exynos_dsi_read_from_fifo(dsi, xfer);
|
|
|
|
if (xfer->rx_done != xfer->rx_len)
|
|
return true;
|
|
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
list_del_init(&xfer->list);
|
|
start = !list_empty(&dsi->transfer_list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
|
|
if (!xfer->rx_len)
|
|
xfer->result = 0;
|
|
complete(&xfer->completed);
|
|
|
|
return start;
|
|
}
|
|
|
|
static void exynos_dsi_remove_transfer(struct exynos_dsi *dsi,
|
|
struct exynos_dsi_transfer *xfer)
|
|
{
|
|
unsigned long flags;
|
|
bool start;
|
|
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
if (!list_empty(&dsi->transfer_list) &&
|
|
xfer == list_first_entry(&dsi->transfer_list,
|
|
struct exynos_dsi_transfer, list)) {
|
|
list_del_init(&xfer->list);
|
|
start = !list_empty(&dsi->transfer_list);
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
if (start)
|
|
exynos_dsi_transfer_start(dsi);
|
|
return;
|
|
}
|
|
|
|
list_del_init(&xfer->list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
}
|
|
|
|
static int exynos_dsi_transfer(struct exynos_dsi *dsi,
|
|
struct exynos_dsi_transfer *xfer)
|
|
{
|
|
unsigned long flags;
|
|
bool stopped;
|
|
|
|
xfer->tx_done = 0;
|
|
xfer->rx_done = 0;
|
|
xfer->result = -ETIMEDOUT;
|
|
init_completion(&xfer->completed);
|
|
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
stopped = list_empty(&dsi->transfer_list);
|
|
list_add_tail(&xfer->list, &dsi->transfer_list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
|
|
if (stopped)
|
|
exynos_dsi_transfer_start(dsi);
|
|
|
|
wait_for_completion_timeout(&xfer->completed,
|
|
msecs_to_jiffies(DSI_XFER_TIMEOUT_MS));
|
|
if (xfer->result == -ETIMEDOUT) {
|
|
exynos_dsi_remove_transfer(dsi, xfer);
|
|
dev_err(dsi->dev, "xfer timed out: %*ph %*ph\n", 2, xfer->data,
|
|
xfer->tx_len, xfer->tx_payload);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* Also covers hardware timeout condition */
|
|
return xfer->result;
|
|
}
|
|
|
|
static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
|
|
{
|
|
struct exynos_dsi *dsi = dev_id;
|
|
u32 status;
|
|
|
|
status = readl(dsi->reg_base + DSIM_INTSRC_REG);
|
|
if (!status) {
|
|
static unsigned long int j;
|
|
if (printk_timed_ratelimit(&j, 500))
|
|
dev_warn(dsi->dev, "spurious interrupt\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
writel(status, dsi->reg_base + DSIM_INTSRC_REG);
|
|
|
|
if (status & DSIM_INT_SW_RST_RELEASE) {
|
|
u32 mask = ~(DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY);
|
|
writel(mask, dsi->reg_base + DSIM_INTMSK_REG);
|
|
complete(&dsi->completed);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (!(status & (DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY)))
|
|
return IRQ_HANDLED;
|
|
|
|
if (exynos_dsi_transfer_finish(dsi))
|
|
exynos_dsi_transfer_start(dsi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t exynos_dsi_te_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct exynos_dsi *dsi = (struct exynos_dsi *)dev_id;
|
|
struct drm_encoder *encoder = dsi->display.encoder;
|
|
|
|
if (dsi->state & DSIM_STATE_ENABLED)
|
|
exynos_drm_crtc_te_handler(encoder->crtc);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void exynos_dsi_enable_irq(struct exynos_dsi *dsi)
|
|
{
|
|
enable_irq(dsi->irq);
|
|
|
|
if (gpio_is_valid(dsi->te_gpio))
|
|
enable_irq(gpio_to_irq(dsi->te_gpio));
|
|
}
|
|
|
|
static void exynos_dsi_disable_irq(struct exynos_dsi *dsi)
|
|
{
|
|
if (gpio_is_valid(dsi->te_gpio))
|
|
disable_irq(gpio_to_irq(dsi->te_gpio));
|
|
|
|
disable_irq(dsi->irq);
|
|
}
|
|
|
|
static int exynos_dsi_init(struct exynos_dsi *dsi)
|
|
{
|
|
exynos_dsi_reset(dsi);
|
|
exynos_dsi_enable_irq(dsi);
|
|
exynos_dsi_enable_clock(dsi);
|
|
exynos_dsi_wait_for_reset(dsi);
|
|
exynos_dsi_set_phy_ctrl(dsi);
|
|
exynos_dsi_init_link(dsi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi)
|
|
{
|
|
int ret;
|
|
int te_gpio_irq;
|
|
|
|
dsi->te_gpio = of_get_named_gpio(dsi->panel_node, "te-gpios", 0);
|
|
if (!gpio_is_valid(dsi->te_gpio)) {
|
|
dev_err(dsi->dev, "no te-gpios specified\n");
|
|
ret = dsi->te_gpio;
|
|
goto out;
|
|
}
|
|
|
|
ret = gpio_request_one(dsi->te_gpio, GPIOF_IN, "te_gpio");
|
|
if (ret) {
|
|
dev_err(dsi->dev, "gpio request failed with %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
te_gpio_irq = gpio_to_irq(dsi->te_gpio);
|
|
|
|
irq_set_status_flags(te_gpio_irq, IRQ_NOAUTOEN);
|
|
ret = request_threaded_irq(te_gpio_irq, exynos_dsi_te_irq_handler, NULL,
|
|
IRQF_TRIGGER_RISING, "TE", dsi);
|
|
if (ret) {
|
|
dev_err(dsi->dev, "request interrupt failed with %d\n", ret);
|
|
gpio_free(dsi->te_gpio);
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi)
|
|
{
|
|
if (gpio_is_valid(dsi->te_gpio)) {
|
|
free_irq(gpio_to_irq(dsi->te_gpio), dsi);
|
|
gpio_free(dsi->te_gpio);
|
|
dsi->te_gpio = -ENOENT;
|
|
}
|
|
}
|
|
|
|
static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
struct exynos_dsi *dsi = host_to_dsi(host);
|
|
|
|
dsi->lanes = device->lanes;
|
|
dsi->format = device->format;
|
|
dsi->mode_flags = device->mode_flags;
|
|
dsi->panel_node = device->dev.of_node;
|
|
|
|
/*
|
|
* This is a temporary solution and should be made by more generic way.
|
|
*
|
|
* If attached panel device is for command mode one, dsi should register
|
|
* TE interrupt handler.
|
|
*/
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO)) {
|
|
int ret = exynos_dsi_register_te_irq(dsi);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (dsi->connector.dev)
|
|
drm_helper_hpd_irq_event(dsi->connector.dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
struct exynos_dsi *dsi = host_to_dsi(host);
|
|
|
|
exynos_dsi_unregister_te_irq(dsi);
|
|
|
|
dsi->panel_node = NULL;
|
|
|
|
if (dsi->connector.dev)
|
|
drm_helper_hpd_irq_event(dsi->connector.dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* distinguish between short and long DSI packet types */
|
|
static bool exynos_dsi_is_short_dsi_type(u8 type)
|
|
{
|
|
return (type & 0x0f) <= 8;
|
|
}
|
|
|
|
static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
struct exynos_dsi *dsi = host_to_dsi(host);
|
|
struct exynos_dsi_transfer xfer;
|
|
int ret;
|
|
|
|
if (!(dsi->state & DSIM_STATE_INITIALIZED)) {
|
|
ret = exynos_dsi_init(dsi);
|
|
if (ret)
|
|
return ret;
|
|
dsi->state |= DSIM_STATE_INITIALIZED;
|
|
}
|
|
|
|
if (msg->tx_len == 0)
|
|
return -EINVAL;
|
|
|
|
xfer.data_id = msg->type | (msg->channel << 6);
|
|
|
|
if (exynos_dsi_is_short_dsi_type(msg->type)) {
|
|
const char *tx_buf = msg->tx_buf;
|
|
|
|
if (msg->tx_len > 2)
|
|
return -EINVAL;
|
|
xfer.tx_len = 0;
|
|
xfer.data[0] = tx_buf[0];
|
|
xfer.data[1] = (msg->tx_len == 2) ? tx_buf[1] : 0;
|
|
} else {
|
|
xfer.tx_len = msg->tx_len;
|
|
xfer.data[0] = msg->tx_len & 0xff;
|
|
xfer.data[1] = msg->tx_len >> 8;
|
|
xfer.tx_payload = msg->tx_buf;
|
|
}
|
|
|
|
xfer.rx_len = msg->rx_len;
|
|
xfer.rx_payload = msg->rx_buf;
|
|
xfer.flags = msg->flags;
|
|
|
|
ret = exynos_dsi_transfer(dsi, &xfer);
|
|
return (ret < 0) ? ret : xfer.rx_done;
|
|
}
|
|
|
|
static const struct mipi_dsi_host_ops exynos_dsi_ops = {
|
|
.attach = exynos_dsi_host_attach,
|
|
.detach = exynos_dsi_host_detach,
|
|
.transfer = exynos_dsi_host_transfer,
|
|
};
|
|
|
|
static int exynos_dsi_poweron(struct exynos_dsi *dsi)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev, "cannot enable regulators %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(dsi->bus_clk);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev, "cannot enable bus clock %d\n", ret);
|
|
goto err_bus_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(dsi->pll_clk);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev, "cannot enable pll clock %d\n", ret);
|
|
goto err_pll_clk;
|
|
}
|
|
|
|
ret = phy_power_on(dsi->phy);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev, "cannot enable phy %d\n", ret);
|
|
goto err_phy;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_phy:
|
|
clk_disable_unprepare(dsi->pll_clk);
|
|
err_pll_clk:
|
|
clk_disable_unprepare(dsi->bus_clk);
|
|
err_bus_clk:
|
|
regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void exynos_dsi_poweroff(struct exynos_dsi *dsi)
|
|
{
|
|
int ret;
|
|
|
|
usleep_range(10000, 20000);
|
|
|
|
if (dsi->state & DSIM_STATE_INITIALIZED) {
|
|
dsi->state &= ~DSIM_STATE_INITIALIZED;
|
|
|
|
exynos_dsi_disable_clock(dsi);
|
|
|
|
exynos_dsi_disable_irq(dsi);
|
|
}
|
|
|
|
dsi->state &= ~DSIM_STATE_CMD_LPM;
|
|
|
|
phy_power_off(dsi->phy);
|
|
|
|
clk_disable_unprepare(dsi->pll_clk);
|
|
clk_disable_unprepare(dsi->bus_clk);
|
|
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
|
|
if (ret < 0)
|
|
dev_err(dsi->dev, "cannot disable regulators %d\n", ret);
|
|
}
|
|
|
|
static int exynos_dsi_enable(struct exynos_dsi *dsi)
|
|
{
|
|
int ret;
|
|
|
|
if (dsi->state & DSIM_STATE_ENABLED)
|
|
return 0;
|
|
|
|
ret = exynos_dsi_poweron(dsi);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = drm_panel_prepare(dsi->panel);
|
|
if (ret < 0) {
|
|
exynos_dsi_poweroff(dsi);
|
|
return ret;
|
|
}
|
|
|
|
exynos_dsi_set_display_mode(dsi);
|
|
exynos_dsi_set_display_enable(dsi, true);
|
|
|
|
dsi->state |= DSIM_STATE_ENABLED;
|
|
|
|
ret = drm_panel_enable(dsi->panel);
|
|
if (ret < 0) {
|
|
dsi->state &= ~DSIM_STATE_ENABLED;
|
|
exynos_dsi_set_display_enable(dsi, false);
|
|
drm_panel_unprepare(dsi->panel);
|
|
exynos_dsi_poweroff(dsi);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos_dsi_disable(struct exynos_dsi *dsi)
|
|
{
|
|
if (!(dsi->state & DSIM_STATE_ENABLED))
|
|
return;
|
|
|
|
drm_panel_disable(dsi->panel);
|
|
exynos_dsi_set_display_enable(dsi, false);
|
|
drm_panel_unprepare(dsi->panel);
|
|
exynos_dsi_poweroff(dsi);
|
|
|
|
dsi->state &= ~DSIM_STATE_ENABLED;
|
|
}
|
|
|
|
static void exynos_dsi_dpms(struct exynos_drm_display *display, int mode)
|
|
{
|
|
struct exynos_dsi *dsi = display_to_dsi(display);
|
|
|
|
if (dsi->panel) {
|
|
switch (mode) {
|
|
case DRM_MODE_DPMS_ON:
|
|
exynos_dsi_enable(dsi);
|
|
break;
|
|
case DRM_MODE_DPMS_STANDBY:
|
|
case DRM_MODE_DPMS_SUSPEND:
|
|
case DRM_MODE_DPMS_OFF:
|
|
exynos_dsi_disable(dsi);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static enum drm_connector_status
|
|
exynos_dsi_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
struct exynos_dsi *dsi = connector_to_dsi(connector);
|
|
|
|
if (!dsi->panel) {
|
|
dsi->panel = of_drm_find_panel(dsi->panel_node);
|
|
if (dsi->panel)
|
|
drm_panel_attach(dsi->panel, &dsi->connector);
|
|
} else if (!dsi->panel_node) {
|
|
struct exynos_drm_display *display;
|
|
|
|
display = platform_get_drvdata(to_platform_device(dsi->dev));
|
|
exynos_dsi_dpms(display, DRM_MODE_DPMS_OFF);
|
|
drm_panel_detach(dsi->panel);
|
|
dsi->panel = NULL;
|
|
}
|
|
|
|
if (dsi->panel)
|
|
return connector_status_connected;
|
|
|
|
return connector_status_disconnected;
|
|
}
|
|
|
|
static void exynos_dsi_connector_destroy(struct drm_connector *connector)
|
|
{
|
|
drm_connector_unregister(connector);
|
|
drm_connector_cleanup(connector);
|
|
connector->dev = NULL;
|
|
}
|
|
|
|
static struct drm_connector_funcs exynos_dsi_connector_funcs = {
|
|
.dpms = drm_helper_connector_dpms,
|
|
.detect = exynos_dsi_detect,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.destroy = exynos_dsi_connector_destroy,
|
|
};
|
|
|
|
static int exynos_dsi_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct exynos_dsi *dsi = connector_to_dsi(connector);
|
|
|
|
if (dsi->panel)
|
|
return dsi->panel->funcs->get_modes(dsi->panel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct drm_encoder *
|
|
exynos_dsi_best_encoder(struct drm_connector *connector)
|
|
{
|
|
struct exynos_dsi *dsi = connector_to_dsi(connector);
|
|
|
|
return dsi->display.encoder;
|
|
}
|
|
|
|
static struct drm_connector_helper_funcs exynos_dsi_connector_helper_funcs = {
|
|
.get_modes = exynos_dsi_get_modes,
|
|
.best_encoder = exynos_dsi_best_encoder,
|
|
};
|
|
|
|
static int exynos_dsi_create_connector(struct exynos_drm_display *display,
|
|
struct drm_encoder *encoder)
|
|
{
|
|
struct exynos_dsi *dsi = display_to_dsi(display);
|
|
struct drm_connector *connector = &dsi->connector;
|
|
int ret;
|
|
|
|
connector->polled = DRM_CONNECTOR_POLL_HPD;
|
|
|
|
ret = drm_connector_init(encoder->dev, connector,
|
|
&exynos_dsi_connector_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to initialize connector with drm\n");
|
|
return ret;
|
|
}
|
|
|
|
drm_connector_helper_add(connector, &exynos_dsi_connector_helper_funcs);
|
|
drm_connector_register(connector);
|
|
drm_mode_connector_attach_encoder(connector, encoder);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos_dsi_mode_set(struct exynos_drm_display *display,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct exynos_dsi *dsi = display_to_dsi(display);
|
|
struct videomode *vm = &dsi->vm;
|
|
|
|
vm->hactive = mode->hdisplay;
|
|
vm->vactive = mode->vdisplay;
|
|
vm->vfront_porch = mode->vsync_start - mode->vdisplay;
|
|
vm->vback_porch = mode->vtotal - mode->vsync_end;
|
|
vm->vsync_len = mode->vsync_end - mode->vsync_start;
|
|
vm->hfront_porch = mode->hsync_start - mode->hdisplay;
|
|
vm->hback_porch = mode->htotal - mode->hsync_end;
|
|
vm->hsync_len = mode->hsync_end - mode->hsync_start;
|
|
}
|
|
|
|
static struct exynos_drm_display_ops exynos_dsi_display_ops = {
|
|
.create_connector = exynos_dsi_create_connector,
|
|
.mode_set = exynos_dsi_mode_set,
|
|
.dpms = exynos_dsi_dpms
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, exynos_dsi_of_match);
|
|
|
|
/* of_* functions will be removed after merge of of_graph patches */
|
|
static struct device_node *
|
|
of_get_child_by_name_reg(struct device_node *parent, const char *name, u32 reg)
|
|
{
|
|
struct device_node *np;
|
|
|
|
for_each_child_of_node(parent, np) {
|
|
u32 r;
|
|
|
|
if (!np->name || of_node_cmp(np->name, name))
|
|
continue;
|
|
|
|
if (of_property_read_u32(np, "reg", &r) < 0)
|
|
r = 0;
|
|
|
|
if (reg == r)
|
|
break;
|
|
}
|
|
|
|
return np;
|
|
}
|
|
|
|
static struct device_node *of_graph_get_port_by_reg(struct device_node *parent,
|
|
u32 reg)
|
|
{
|
|
struct device_node *ports, *port;
|
|
|
|
ports = of_get_child_by_name(parent, "ports");
|
|
if (ports)
|
|
parent = ports;
|
|
|
|
port = of_get_child_by_name_reg(parent, "port", reg);
|
|
|
|
of_node_put(ports);
|
|
|
|
return port;
|
|
}
|
|
|
|
static struct device_node *
|
|
of_graph_get_endpoint_by_reg(struct device_node *port, u32 reg)
|
|
{
|
|
return of_get_child_by_name_reg(port, "endpoint", reg);
|
|
}
|
|
|
|
static int exynos_dsi_of_read_u32(const struct device_node *np,
|
|
const char *propname, u32 *out_value)
|
|
{
|
|
int ret = of_property_read_u32(np, propname, out_value);
|
|
|
|
if (ret < 0)
|
|
pr_err("%s: failed to get '%s' property\n", np->full_name,
|
|
propname);
|
|
|
|
return ret;
|
|
}
|
|
|
|
enum {
|
|
DSI_PORT_IN,
|
|
DSI_PORT_OUT
|
|
};
|
|
|
|
static int exynos_dsi_parse_dt(struct exynos_dsi *dsi)
|
|
{
|
|
struct device *dev = dsi->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct device_node *port, *ep;
|
|
int ret;
|
|
|
|
ret = exynos_dsi_of_read_u32(node, "samsung,pll-clock-frequency",
|
|
&dsi->pll_clk_rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
port = of_graph_get_port_by_reg(node, DSI_PORT_OUT);
|
|
if (!port) {
|
|
dev_err(dev, "no output port specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ep = of_graph_get_endpoint_by_reg(port, 0);
|
|
of_node_put(port);
|
|
if (!ep) {
|
|
dev_err(dev, "no endpoint specified in output port\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = exynos_dsi_of_read_u32(ep, "samsung,burst-clock-frequency",
|
|
&dsi->burst_clk_rate);
|
|
if (ret < 0)
|
|
goto end;
|
|
|
|
ret = exynos_dsi_of_read_u32(ep, "samsung,esc-clock-frequency",
|
|
&dsi->esc_clk_rate);
|
|
|
|
end:
|
|
of_node_put(ep);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int exynos_dsi_bind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct exynos_drm_display *display = dev_get_drvdata(dev);
|
|
struct exynos_dsi *dsi = display_to_dsi(display);
|
|
struct drm_device *drm_dev = data;
|
|
int ret;
|
|
|
|
ret = exynos_drm_create_enc_conn(drm_dev, display);
|
|
if (ret) {
|
|
DRM_ERROR("Encoder create [%d] failed with %d\n",
|
|
display->type, ret);
|
|
return ret;
|
|
}
|
|
|
|
return mipi_dsi_host_register(&dsi->dsi_host);
|
|
}
|
|
|
|
static void exynos_dsi_unbind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct exynos_drm_display *display = dev_get_drvdata(dev);
|
|
struct exynos_dsi *dsi = display_to_dsi(display);
|
|
|
|
exynos_dsi_dpms(display, DRM_MODE_DPMS_OFF);
|
|
|
|
mipi_dsi_host_unregister(&dsi->dsi_host);
|
|
}
|
|
|
|
static const struct component_ops exynos_dsi_component_ops = {
|
|
.bind = exynos_dsi_bind,
|
|
.unbind = exynos_dsi_unbind,
|
|
};
|
|
|
|
static int exynos_dsi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct exynos_dsi *dsi;
|
|
int ret;
|
|
|
|
dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
|
|
if (!dsi)
|
|
return -ENOMEM;
|
|
|
|
dsi->display.type = EXYNOS_DISPLAY_TYPE_LCD;
|
|
dsi->display.ops = &exynos_dsi_display_ops;
|
|
|
|
ret = exynos_drm_component_add(dev, EXYNOS_DEVICE_TYPE_CONNECTOR,
|
|
dsi->display.type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* To be checked as invalid one */
|
|
dsi->te_gpio = -ENOENT;
|
|
|
|
init_completion(&dsi->completed);
|
|
spin_lock_init(&dsi->transfer_lock);
|
|
INIT_LIST_HEAD(&dsi->transfer_list);
|
|
|
|
dsi->dsi_host.ops = &exynos_dsi_ops;
|
|
dsi->dsi_host.dev = dev;
|
|
|
|
dsi->dev = dev;
|
|
dsi->driver_data = exynos_dsi_get_driver_data(pdev);
|
|
|
|
ret = exynos_dsi_parse_dt(dsi);
|
|
if (ret)
|
|
goto err_del_component;
|
|
|
|
dsi->supplies[0].supply = "vddcore";
|
|
dsi->supplies[1].supply = "vddio";
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies),
|
|
dsi->supplies);
|
|
if (ret) {
|
|
dev_info(dev, "failed to get regulators: %d\n", ret);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
dsi->pll_clk = devm_clk_get(dev, "pll_clk");
|
|
if (IS_ERR(dsi->pll_clk)) {
|
|
dev_info(dev, "failed to get dsi pll input clock\n");
|
|
ret = PTR_ERR(dsi->pll_clk);
|
|
goto err_del_component;
|
|
}
|
|
|
|
dsi->bus_clk = devm_clk_get(dev, "bus_clk");
|
|
if (IS_ERR(dsi->bus_clk)) {
|
|
dev_info(dev, "failed to get dsi bus clock\n");
|
|
ret = PTR_ERR(dsi->bus_clk);
|
|
goto err_del_component;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
dsi->reg_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(dsi->reg_base)) {
|
|
dev_err(dev, "failed to remap io region\n");
|
|
ret = PTR_ERR(dsi->reg_base);
|
|
goto err_del_component;
|
|
}
|
|
|
|
dsi->phy = devm_phy_get(dev, "dsim");
|
|
if (IS_ERR(dsi->phy)) {
|
|
dev_info(dev, "failed to get dsim phy\n");
|
|
ret = PTR_ERR(dsi->phy);
|
|
goto err_del_component;
|
|
}
|
|
|
|
dsi->irq = platform_get_irq(pdev, 0);
|
|
if (dsi->irq < 0) {
|
|
dev_err(dev, "failed to request dsi irq resource\n");
|
|
ret = dsi->irq;
|
|
goto err_del_component;
|
|
}
|
|
|
|
irq_set_status_flags(dsi->irq, IRQ_NOAUTOEN);
|
|
ret = devm_request_threaded_irq(dev, dsi->irq, NULL,
|
|
exynos_dsi_irq, IRQF_ONESHOT,
|
|
dev_name(dev), dsi);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request dsi irq\n");
|
|
goto err_del_component;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, &dsi->display);
|
|
|
|
ret = component_add(dev, &exynos_dsi_component_ops);
|
|
if (ret)
|
|
goto err_del_component;
|
|
|
|
return ret;
|
|
|
|
err_del_component:
|
|
exynos_drm_component_del(dev, EXYNOS_DEVICE_TYPE_CONNECTOR);
|
|
return ret;
|
|
}
|
|
|
|
static int exynos_dsi_remove(struct platform_device *pdev)
|
|
{
|
|
component_del(&pdev->dev, &exynos_dsi_component_ops);
|
|
exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CONNECTOR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct platform_driver dsi_driver = {
|
|
.probe = exynos_dsi_probe,
|
|
.remove = exynos_dsi_remove,
|
|
.driver = {
|
|
.name = "exynos-dsi",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = exynos_dsi_of_match,
|
|
},
|
|
};
|
|
|
|
MODULE_AUTHOR("Tomasz Figa <t.figa@samsung.com>");
|
|
MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>");
|
|
MODULE_DESCRIPTION("Samsung SoC MIPI DSI Master");
|
|
MODULE_LICENSE("GPL v2");
|