mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 23:26:45 +07:00
f000fd8093
free_irq() calls synchronize_irq() for you, so there is no need for drivers to manually do the same thing (again). Thus, calls where sync-irq immediately precedes free-irq can be simplified. However, during this audit several bugs were noticed, where free-irq is preceded by a "irq >= 0" check... but the sync-irq call is not covered by the same check. So, where sync-irq could not be eliminated completely, the missing check was added. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
1992 lines
62 KiB
C
1992 lines
62 KiB
C
/*
|
|
* azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168).
|
|
* Copyright (C) 2002, 2005, 2006, 2007 by Andreas Mohr <andi AT lisas.de>
|
|
*
|
|
* Framework borrowed from Bart Hartgers's als4000.c.
|
|
* Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801),
|
|
* found in a Fujitsu-Siemens PC ("Cordant", aluminum case).
|
|
* Other versions are:
|
|
* PCI168 A(W), sub ID 1800
|
|
* PCI168 A/AP, sub ID 8000
|
|
* Please give me feedback in case you try my driver with one of these!!
|
|
*
|
|
* GPL LICENSE
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* NOTES
|
|
* Since Aztech does not provide any chipset documentation,
|
|
* even on repeated request to various addresses,
|
|
* and the answer that was finally given was negative
|
|
* (and I was stupid enough to manage to get hold of a PCI168 soundcard
|
|
* in the first place >:-P}),
|
|
* I was forced to base this driver on reverse engineering
|
|
* (3 weeks' worth of evenings filled with driver work).
|
|
* (and no, I did NOT go the easy way: to pick up a SB PCI128 for 9 Euros)
|
|
*
|
|
* The AZF3328 chip (note: AZF3328, *not* AZT3328, that's just the driver name
|
|
* for compatibility reasons) has the following features:
|
|
*
|
|
* - builtin AC97 conformant codec (SNR over 80dB)
|
|
* Note that "conformant" != "compliant"!! this chip's mixer register layout
|
|
* *differs* from the standard AC97 layout:
|
|
* they chose to not implement the headphone register (which is not a
|
|
* problem since it's merely optional), yet when doing this, they committed
|
|
* the grave sin of letting other registers follow immediately instead of
|
|
* keeping a headphone dummy register, thereby shifting the mixer register
|
|
* addresses illegally. So far unfortunately it looks like the very flexible
|
|
* ALSA AC97 support is still not enough to easily compensate for such a
|
|
* grave layout violation despite all tweaks and quirks mechanisms it offers.
|
|
* - builtin genuine OPL3
|
|
* - full duplex 16bit playback/record at independent sampling rate
|
|
* - MPU401 (+ legacy address support) FIXME: how to enable legacy addr??
|
|
* - game port (legacy address support)
|
|
* - builtin 3D enhancement (said to be YAMAHA Ymersion)
|
|
* - builtin DirectInput support, helps reduce CPU overhead (interrupt-driven
|
|
* features supported)
|
|
* - built-in General DirectX timer having a 20 bits counter
|
|
* with 1us resolution (see below!)
|
|
* - I2S serial port for external DAC
|
|
* - supports 33MHz PCI spec 2.1, PCI power management 1.0, compliant with ACPI
|
|
* - supports hardware volume control
|
|
* - single chip low cost solution (128 pin QFP)
|
|
* - supports programmable Sub-vendor and Sub-system ID
|
|
* required for Microsoft's logo compliance (FIXME: where?)
|
|
* - PCI168 AP(W) card: power amplifier with 4 Watts/channel at 4 Ohms
|
|
*
|
|
* Note that this driver now is actually *better* than the Windows driver,
|
|
* since it additionally supports the card's 1MHz DirectX timer - just try
|
|
* the following snd-seq module parameters etc.:
|
|
* - options snd-seq seq_default_timer_class=2 seq_default_timer_sclass=0
|
|
* seq_default_timer_card=0 seq_client_load=1 seq_default_timer_device=0
|
|
* seq_default_timer_subdevice=0 seq_default_timer_resolution=1000000
|
|
* - "timidity -iAv -B2,8 -Os -EFreverb=0"
|
|
* - "pmidi -p 128:0 jazz.mid"
|
|
*
|
|
* Certain PCI versions of this card are susceptible to DMA traffic underruns
|
|
* in some systems (resulting in sound crackling/clicking/popping),
|
|
* probably because they don't have a DMA FIFO buffer or so.
|
|
* Overview (PCI ID/PCI subID/PCI rev.):
|
|
* - no DMA crackling on SiS735: 0x50DC/0x1801/16
|
|
* - unknown performance: 0x50DC/0x1801/10
|
|
* (well, it's not bad on an Athlon 1800 with now very optimized IRQ handler)
|
|
*
|
|
* Crackling happens with VIA chipsets or, in my case, an SiS735, which is
|
|
* supposed to be very fast and supposed to get rid of crackling much
|
|
* better than a VIA, yet ironically I still get crackling, like many other
|
|
* people with the same chipset.
|
|
* Possible remedies:
|
|
* - plug card into a different PCI slot, preferrably one that isn't shared
|
|
* too much (this helps a lot, but not completely!)
|
|
* - get rid of PCI VGA card, use AGP instead
|
|
* - upgrade or downgrade BIOS
|
|
* - fiddle with PCI latency settings (setpci -v -s BUSID latency_timer=XX)
|
|
* Not too helpful.
|
|
* - Disable ACPI/power management/"Auto Detect RAM/PCI Clk" in BIOS
|
|
*
|
|
* BUGS
|
|
* - full-duplex might *still* be problematic, not fully tested recently
|
|
* - (non-bug) "Bass/Treble or 3D settings don't work" - they do get evaluated
|
|
* if you set PCM output switch to "pre 3D" instead of "post 3D".
|
|
* If this can't be set, then get a mixer application that Isn't Stupid (tm)
|
|
* (e.g. kmix, gamix) - unfortunately several are!!
|
|
*
|
|
* TODO
|
|
* - test MPU401 MIDI playback etc.
|
|
* - add some power micro-management (disable various units of the card
|
|
* as long as they're unused). However this requires I/O ports which I
|
|
* haven't figured out yet and which thus might not even exist...
|
|
* The standard suspend/resume functionality could probably make use of
|
|
* some improvement, too...
|
|
* - figure out what all unknown port bits are responsible for
|
|
* - figure out some cleverly evil scheme to possibly make ALSA AC97 code
|
|
* fully accept our quite incompatible ""AC97"" mixer and thus save some
|
|
* code (but I'm not too optimistic that doing this is possible at all)
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/gameport.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <sound/core.h>
|
|
#include <sound/control.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/rawmidi.h>
|
|
#include <sound/mpu401.h>
|
|
#include <sound/opl3.h>
|
|
#include <sound/initval.h>
|
|
#include "azt3328.h"
|
|
|
|
MODULE_AUTHOR("Andreas Mohr <andi AT lisas.de>");
|
|
MODULE_DESCRIPTION("Aztech AZF3328 (PCI168)");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}");
|
|
|
|
#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
|
|
#define SUPPORT_JOYSTICK 1
|
|
#endif
|
|
|
|
#define DEBUG_MISC 0
|
|
#define DEBUG_CALLS 0
|
|
#define DEBUG_MIXER 0
|
|
#define DEBUG_PLAY_REC 0
|
|
#define DEBUG_IO 0
|
|
#define DEBUG_TIMER 0
|
|
#define MIXER_TESTING 0
|
|
|
|
#if DEBUG_MISC
|
|
#define snd_azf3328_dbgmisc(format, args...) printk(KERN_ERR format, ##args)
|
|
#else
|
|
#define snd_azf3328_dbgmisc(format, args...)
|
|
#endif
|
|
|
|
#if DEBUG_CALLS
|
|
#define snd_azf3328_dbgcalls(format, args...) printk(format, ##args)
|
|
#define snd_azf3328_dbgcallenter() printk(KERN_ERR "--> %s\n", __func__)
|
|
#define snd_azf3328_dbgcallleave() printk(KERN_ERR "<-- %s\n", __func__)
|
|
#else
|
|
#define snd_azf3328_dbgcalls(format, args...)
|
|
#define snd_azf3328_dbgcallenter()
|
|
#define snd_azf3328_dbgcallleave()
|
|
#endif
|
|
|
|
#if DEBUG_MIXER
|
|
#define snd_azf3328_dbgmixer(format, args...) printk(format, ##args)
|
|
#else
|
|
#define snd_azf3328_dbgmixer(format, args...)
|
|
#endif
|
|
|
|
#if DEBUG_PLAY_REC
|
|
#define snd_azf3328_dbgplay(format, args...) printk(KERN_ERR format, ##args)
|
|
#else
|
|
#define snd_azf3328_dbgplay(format, args...)
|
|
#endif
|
|
|
|
#if DEBUG_MISC
|
|
#define snd_azf3328_dbgtimer(format, args...) printk(KERN_ERR format, ##args)
|
|
#else
|
|
#define snd_azf3328_dbgtimer(format, args...)
|
|
#endif
|
|
|
|
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
|
|
module_param_array(index, int, NULL, 0444);
|
|
MODULE_PARM_DESC(index, "Index value for AZF3328 soundcard.");
|
|
|
|
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
|
|
module_param_array(id, charp, NULL, 0444);
|
|
MODULE_PARM_DESC(id, "ID string for AZF3328 soundcard.");
|
|
|
|
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */
|
|
module_param_array(enable, bool, NULL, 0444);
|
|
MODULE_PARM_DESC(enable, "Enable AZF3328 soundcard.");
|
|
|
|
#ifdef SUPPORT_JOYSTICK
|
|
static int joystick[SNDRV_CARDS];
|
|
module_param_array(joystick, bool, NULL, 0444);
|
|
MODULE_PARM_DESC(joystick, "Enable joystick for AZF3328 soundcard.");
|
|
#endif
|
|
|
|
static int seqtimer_scaling = 128;
|
|
module_param(seqtimer_scaling, int, 0444);
|
|
MODULE_PARM_DESC(seqtimer_scaling, "Set 1024000Hz sequencer timer scale factor (lockup danger!). Default 128.");
|
|
|
|
struct snd_azf3328 {
|
|
/* often-used fields towards beginning, then grouped */
|
|
unsigned long codec_port;
|
|
unsigned long io2_port;
|
|
unsigned long mpu_port;
|
|
unsigned long synth_port;
|
|
unsigned long mixer_port;
|
|
|
|
spinlock_t reg_lock;
|
|
|
|
struct snd_timer *timer;
|
|
|
|
struct snd_pcm *pcm;
|
|
struct snd_pcm_substream *playback_substream;
|
|
struct snd_pcm_substream *capture_substream;
|
|
unsigned int is_playing;
|
|
unsigned int is_recording;
|
|
|
|
struct snd_card *card;
|
|
struct snd_rawmidi *rmidi;
|
|
|
|
#ifdef SUPPORT_JOYSTICK
|
|
struct gameport *gameport;
|
|
#endif
|
|
|
|
struct pci_dev *pci;
|
|
int irq;
|
|
|
|
#ifdef CONFIG_PM
|
|
/* register value containers for power management
|
|
* Note: not always full I/O range preserved (just like Win driver!) */
|
|
u16 saved_regs_codec [AZF_IO_SIZE_CODEC_PM / 2];
|
|
u16 saved_regs_io2 [AZF_IO_SIZE_IO2_PM / 2];
|
|
u16 saved_regs_mpu [AZF_IO_SIZE_MPU_PM / 2];
|
|
u16 saved_regs_synth[AZF_IO_SIZE_SYNTH_PM / 2];
|
|
u16 saved_regs_mixer[AZF_IO_SIZE_MIXER_PM / 2];
|
|
#endif
|
|
};
|
|
|
|
static const struct pci_device_id snd_azf3328_ids[] = {
|
|
{ 0x122D, 0x50DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* PCI168/3328 */
|
|
{ 0x122D, 0x80DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* 3328 */
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, snd_azf3328_ids);
|
|
|
|
static inline void
|
|
snd_azf3328_codec_outb(const struct snd_azf3328 *chip, int reg, u8 value)
|
|
{
|
|
outb(value, chip->codec_port + reg);
|
|
}
|
|
|
|
static inline u8
|
|
snd_azf3328_codec_inb(const struct snd_azf3328 *chip, int reg)
|
|
{
|
|
return inb(chip->codec_port + reg);
|
|
}
|
|
|
|
static inline void
|
|
snd_azf3328_codec_outw(const struct snd_azf3328 *chip, int reg, u16 value)
|
|
{
|
|
outw(value, chip->codec_port + reg);
|
|
}
|
|
|
|
static inline u16
|
|
snd_azf3328_codec_inw(const struct snd_azf3328 *chip, int reg)
|
|
{
|
|
return inw(chip->codec_port + reg);
|
|
}
|
|
|
|
static inline void
|
|
snd_azf3328_codec_outl(const struct snd_azf3328 *chip, int reg, u32 value)
|
|
{
|
|
outl(value, chip->codec_port + reg);
|
|
}
|
|
|
|
static inline void
|
|
snd_azf3328_io2_outb(const struct snd_azf3328 *chip, int reg, u8 value)
|
|
{
|
|
outb(value, chip->io2_port + reg);
|
|
}
|
|
|
|
static inline u8
|
|
snd_azf3328_io2_inb(const struct snd_azf3328 *chip, int reg)
|
|
{
|
|
return inb(chip->io2_port + reg);
|
|
}
|
|
|
|
static inline void
|
|
snd_azf3328_mixer_outw(const struct snd_azf3328 *chip, int reg, u16 value)
|
|
{
|
|
outw(value, chip->mixer_port + reg);
|
|
}
|
|
|
|
static inline u16
|
|
snd_azf3328_mixer_inw(const struct snd_azf3328 *chip, int reg)
|
|
{
|
|
return inw(chip->mixer_port + reg);
|
|
}
|
|
|
|
static void
|
|
snd_azf3328_mixer_set_mute(const struct snd_azf3328 *chip, int reg, int do_mute)
|
|
{
|
|
unsigned long portbase = chip->mixer_port + reg + 1;
|
|
unsigned char oldval;
|
|
|
|
/* the mute bit is on the *second* (i.e. right) register of a
|
|
* left/right channel setting */
|
|
oldval = inb(portbase);
|
|
if (do_mute)
|
|
oldval |= 0x80;
|
|
else
|
|
oldval &= ~0x80;
|
|
outb(oldval, portbase);
|
|
}
|
|
|
|
static void
|
|
snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip, int reg, unsigned char dst_vol_left, unsigned char dst_vol_right, int chan_sel, int delay)
|
|
{
|
|
unsigned long portbase = chip->mixer_port + reg;
|
|
unsigned char curr_vol_left = 0, curr_vol_right = 0;
|
|
int left_done = 0, right_done = 0;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
if (chan_sel & SET_CHAN_LEFT)
|
|
curr_vol_left = inb(portbase + 1);
|
|
else
|
|
left_done = 1;
|
|
if (chan_sel & SET_CHAN_RIGHT)
|
|
curr_vol_right = inb(portbase + 0);
|
|
else
|
|
right_done = 1;
|
|
|
|
/* take care of muting flag (0x80) contained in left channel */
|
|
if (curr_vol_left & 0x80)
|
|
dst_vol_left |= 0x80;
|
|
else
|
|
dst_vol_left &= ~0x80;
|
|
|
|
do {
|
|
if (!left_done) {
|
|
if (curr_vol_left > dst_vol_left)
|
|
curr_vol_left--;
|
|
else
|
|
if (curr_vol_left < dst_vol_left)
|
|
curr_vol_left++;
|
|
else
|
|
left_done = 1;
|
|
outb(curr_vol_left, portbase + 1);
|
|
}
|
|
if (!right_done) {
|
|
if (curr_vol_right > dst_vol_right)
|
|
curr_vol_right--;
|
|
else
|
|
if (curr_vol_right < dst_vol_right)
|
|
curr_vol_right++;
|
|
else
|
|
right_done = 1;
|
|
/* during volume change, the right channel is crackling
|
|
* somewhat more than the left channel, unfortunately.
|
|
* This seems to be a hardware issue. */
|
|
outb(curr_vol_right, portbase + 0);
|
|
}
|
|
if (delay)
|
|
mdelay(delay);
|
|
} while ((!left_done) || (!right_done));
|
|
snd_azf3328_dbgcallleave();
|
|
}
|
|
|
|
/*
|
|
* general mixer element
|
|
*/
|
|
struct azf3328_mixer_reg {
|
|
unsigned int reg;
|
|
unsigned int lchan_shift, rchan_shift;
|
|
unsigned int mask;
|
|
unsigned int invert: 1;
|
|
unsigned int stereo: 1;
|
|
unsigned int enum_c: 4;
|
|
};
|
|
|
|
#define COMPOSE_MIXER_REG(reg,lchan_shift,rchan_shift,mask,invert,stereo,enum_c) \
|
|
((reg) | (lchan_shift << 8) | (rchan_shift << 12) | \
|
|
(mask << 16) | \
|
|
(invert << 24) | \
|
|
(stereo << 25) | \
|
|
(enum_c << 26))
|
|
|
|
static void snd_azf3328_mixer_reg_decode(struct azf3328_mixer_reg *r, unsigned long val)
|
|
{
|
|
r->reg = val & 0xff;
|
|
r->lchan_shift = (val >> 8) & 0x0f;
|
|
r->rchan_shift = (val >> 12) & 0x0f;
|
|
r->mask = (val >> 16) & 0xff;
|
|
r->invert = (val >> 24) & 1;
|
|
r->stereo = (val >> 25) & 1;
|
|
r->enum_c = (val >> 26) & 0x0f;
|
|
}
|
|
|
|
/*
|
|
* mixer switches/volumes
|
|
*/
|
|
|
|
#define AZF3328_MIXER_SWITCH(xname, reg, shift, invert) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
.info = snd_azf3328_info_mixer, \
|
|
.get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \
|
|
.private_value = COMPOSE_MIXER_REG(reg, shift, 0, 0x1, invert, 0, 0), \
|
|
}
|
|
|
|
#define AZF3328_MIXER_VOL_STEREO(xname, reg, mask, invert) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
.info = snd_azf3328_info_mixer, \
|
|
.get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \
|
|
.private_value = COMPOSE_MIXER_REG(reg, 8, 0, mask, invert, 1, 0), \
|
|
}
|
|
|
|
#define AZF3328_MIXER_VOL_MONO(xname, reg, mask, is_right_chan) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
.info = snd_azf3328_info_mixer, \
|
|
.get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \
|
|
.private_value = COMPOSE_MIXER_REG(reg, is_right_chan ? 0 : 8, 0, mask, 1, 0, 0), \
|
|
}
|
|
|
|
#define AZF3328_MIXER_VOL_SPECIAL(xname, reg, mask, shift, invert) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
.info = snd_azf3328_info_mixer, \
|
|
.get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \
|
|
.private_value = COMPOSE_MIXER_REG(reg, shift, 0, mask, invert, 0, 0), \
|
|
}
|
|
|
|
#define AZF3328_MIXER_ENUM(xname, reg, enum_c, shift) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
.info = snd_azf3328_info_mixer_enum, \
|
|
.get = snd_azf3328_get_mixer_enum, .put = snd_azf3328_put_mixer_enum, \
|
|
.private_value = COMPOSE_MIXER_REG(reg, shift, 0, 0, 0, 0, enum_c), \
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_info_mixer(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct azf3328_mixer_reg reg;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
|
uinfo->type = reg.mask == 1 ?
|
|
SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = reg.stereo + 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = reg.mask;
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_get_mixer(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
|
|
struct azf3328_mixer_reg reg;
|
|
unsigned int oreg, val;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
|
|
|
oreg = snd_azf3328_mixer_inw(chip, reg.reg);
|
|
val = (oreg >> reg.lchan_shift) & reg.mask;
|
|
if (reg.invert)
|
|
val = reg.mask - val;
|
|
ucontrol->value.integer.value[0] = val;
|
|
if (reg.stereo) {
|
|
val = (oreg >> reg.rchan_shift) & reg.mask;
|
|
if (reg.invert)
|
|
val = reg.mask - val;
|
|
ucontrol->value.integer.value[1] = val;
|
|
}
|
|
snd_azf3328_dbgmixer("get: %02x is %04x -> vol %02lx|%02lx "
|
|
"(shift %02d|%02d, mask %02x, inv. %d, stereo %d)\n",
|
|
reg.reg, oreg,
|
|
ucontrol->value.integer.value[0], ucontrol->value.integer.value[1],
|
|
reg.lchan_shift, reg.rchan_shift, reg.mask, reg.invert, reg.stereo);
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_put_mixer(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
|
|
struct azf3328_mixer_reg reg;
|
|
unsigned int oreg, nreg, val;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
|
oreg = snd_azf3328_mixer_inw(chip, reg.reg);
|
|
val = ucontrol->value.integer.value[0] & reg.mask;
|
|
if (reg.invert)
|
|
val = reg.mask - val;
|
|
nreg = oreg & ~(reg.mask << reg.lchan_shift);
|
|
nreg |= (val << reg.lchan_shift);
|
|
if (reg.stereo) {
|
|
val = ucontrol->value.integer.value[1] & reg.mask;
|
|
if (reg.invert)
|
|
val = reg.mask - val;
|
|
nreg &= ~(reg.mask << reg.rchan_shift);
|
|
nreg |= (val << reg.rchan_shift);
|
|
}
|
|
if (reg.mask >= 0x07) /* it's a volume control, so better take care */
|
|
snd_azf3328_mixer_write_volume_gradually(
|
|
chip, reg.reg, nreg >> 8, nreg & 0xff,
|
|
/* just set both channels, doesn't matter */
|
|
SET_CHAN_LEFT|SET_CHAN_RIGHT,
|
|
0);
|
|
else
|
|
snd_azf3328_mixer_outw(chip, reg.reg, nreg);
|
|
|
|
snd_azf3328_dbgmixer("put: %02x to %02lx|%02lx, "
|
|
"oreg %04x; shift %02d|%02d -> nreg %04x; after: %04x\n",
|
|
reg.reg, ucontrol->value.integer.value[0], ucontrol->value.integer.value[1],
|
|
oreg, reg.lchan_shift, reg.rchan_shift,
|
|
nreg, snd_azf3328_mixer_inw(chip, reg.reg));
|
|
snd_azf3328_dbgcallleave();
|
|
return (nreg != oreg);
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
static const char * const texts1[] = {
|
|
"Mic1", "Mic2"
|
|
};
|
|
static const char * const texts2[] = {
|
|
"Mix", "Mic"
|
|
};
|
|
static const char * const texts3[] = {
|
|
"Mic", "CD", "Video", "Aux",
|
|
"Line", "Mix", "Mix Mono", "Phone"
|
|
};
|
|
static const char * const texts4[] = {
|
|
"pre 3D", "post 3D"
|
|
};
|
|
struct azf3328_mixer_reg reg;
|
|
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
uinfo->count = (reg.reg == IDX_MIXER_REC_SELECT) ? 2 : 1;
|
|
uinfo->value.enumerated.items = reg.enum_c;
|
|
if (uinfo->value.enumerated.item > reg.enum_c - 1U)
|
|
uinfo->value.enumerated.item = reg.enum_c - 1U;
|
|
if (reg.reg == IDX_MIXER_ADVCTL2) {
|
|
switch(reg.lchan_shift) {
|
|
case 8: /* modem out sel */
|
|
strcpy(uinfo->value.enumerated.name, texts1[uinfo->value.enumerated.item]);
|
|
break;
|
|
case 9: /* mono sel source */
|
|
strcpy(uinfo->value.enumerated.name, texts2[uinfo->value.enumerated.item]);
|
|
break;
|
|
case 15: /* PCM Out Path */
|
|
strcpy(uinfo->value.enumerated.name, texts4[uinfo->value.enumerated.item]);
|
|
break;
|
|
}
|
|
} else
|
|
strcpy(uinfo->value.enumerated.name, texts3[uinfo->value.enumerated.item]
|
|
);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_get_mixer_enum(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
|
|
struct azf3328_mixer_reg reg;
|
|
unsigned short val;
|
|
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
|
val = snd_azf3328_mixer_inw(chip, reg.reg);
|
|
if (reg.reg == IDX_MIXER_REC_SELECT) {
|
|
ucontrol->value.enumerated.item[0] = (val >> 8) & (reg.enum_c - 1);
|
|
ucontrol->value.enumerated.item[1] = (val >> 0) & (reg.enum_c - 1);
|
|
} else
|
|
ucontrol->value.enumerated.item[0] = (val >> reg.lchan_shift) & (reg.enum_c - 1);
|
|
|
|
snd_azf3328_dbgmixer("get_enum: %02x is %04x -> %d|%d (shift %02d, enum_c %d)\n",
|
|
reg.reg, val, ucontrol->value.enumerated.item[0], ucontrol->value.enumerated.item[1],
|
|
reg.lchan_shift, reg.enum_c);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_put_mixer_enum(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
|
|
struct azf3328_mixer_reg reg;
|
|
unsigned int oreg, nreg, val;
|
|
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
|
oreg = snd_azf3328_mixer_inw(chip, reg.reg);
|
|
val = oreg;
|
|
if (reg.reg == IDX_MIXER_REC_SELECT) {
|
|
if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U ||
|
|
ucontrol->value.enumerated.item[1] > reg.enum_c - 1U)
|
|
return -EINVAL;
|
|
val = (ucontrol->value.enumerated.item[0] << 8) |
|
|
(ucontrol->value.enumerated.item[1] << 0);
|
|
} else {
|
|
if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U)
|
|
return -EINVAL;
|
|
val &= ~((reg.enum_c - 1) << reg.lchan_shift);
|
|
val |= (ucontrol->value.enumerated.item[0] << reg.lchan_shift);
|
|
}
|
|
snd_azf3328_mixer_outw(chip, reg.reg, val);
|
|
nreg = val;
|
|
|
|
snd_azf3328_dbgmixer("put_enum: %02x to %04x, oreg %04x\n", reg.reg, val, oreg);
|
|
return (nreg != oreg);
|
|
}
|
|
|
|
static struct snd_kcontrol_new snd_azf3328_mixer_controls[] __devinitdata = {
|
|
AZF3328_MIXER_SWITCH("Master Playback Switch", IDX_MIXER_PLAY_MASTER, 15, 1),
|
|
AZF3328_MIXER_VOL_STEREO("Master Playback Volume", IDX_MIXER_PLAY_MASTER, 0x1f, 1),
|
|
AZF3328_MIXER_SWITCH("Wave Playback Switch", IDX_MIXER_WAVEOUT, 15, 1),
|
|
AZF3328_MIXER_VOL_STEREO("Wave Playback Volume", IDX_MIXER_WAVEOUT, 0x1f, 1),
|
|
AZF3328_MIXER_SWITCH("Wave 3D Bypass Playback Switch", IDX_MIXER_ADVCTL2, 7, 1),
|
|
AZF3328_MIXER_SWITCH("FM Playback Switch", IDX_MIXER_FMSYNTH, 15, 1),
|
|
AZF3328_MIXER_VOL_STEREO("FM Playback Volume", IDX_MIXER_FMSYNTH, 0x1f, 1),
|
|
AZF3328_MIXER_SWITCH("CD Playback Switch", IDX_MIXER_CDAUDIO, 15, 1),
|
|
AZF3328_MIXER_VOL_STEREO("CD Playback Volume", IDX_MIXER_CDAUDIO, 0x1f, 1),
|
|
AZF3328_MIXER_SWITCH("Capture Switch", IDX_MIXER_REC_VOLUME, 15, 1),
|
|
AZF3328_MIXER_VOL_STEREO("Capture Volume", IDX_MIXER_REC_VOLUME, 0x0f, 0),
|
|
AZF3328_MIXER_ENUM("Capture Source", IDX_MIXER_REC_SELECT, 8, 0),
|
|
AZF3328_MIXER_SWITCH("Mic Playback Switch", IDX_MIXER_MIC, 15, 1),
|
|
AZF3328_MIXER_VOL_MONO("Mic Playback Volume", IDX_MIXER_MIC, 0x1f, 1),
|
|
AZF3328_MIXER_SWITCH("Mic Boost (+20dB)", IDX_MIXER_MIC, 6, 0),
|
|
AZF3328_MIXER_SWITCH("Line Playback Switch", IDX_MIXER_LINEIN, 15, 1),
|
|
AZF3328_MIXER_VOL_STEREO("Line Playback Volume", IDX_MIXER_LINEIN, 0x1f, 1),
|
|
AZF3328_MIXER_SWITCH("PC Speaker Playback Switch", IDX_MIXER_PCBEEP, 15, 1),
|
|
AZF3328_MIXER_VOL_SPECIAL("PC Speaker Playback Volume", IDX_MIXER_PCBEEP, 0x0f, 1, 1),
|
|
AZF3328_MIXER_SWITCH("Video Playback Switch", IDX_MIXER_VIDEO, 15, 1),
|
|
AZF3328_MIXER_VOL_STEREO("Video Playback Volume", IDX_MIXER_VIDEO, 0x1f, 1),
|
|
AZF3328_MIXER_SWITCH("Aux Playback Switch", IDX_MIXER_AUX, 15, 1),
|
|
AZF3328_MIXER_VOL_STEREO("Aux Playback Volume", IDX_MIXER_AUX, 0x1f, 1),
|
|
AZF3328_MIXER_SWITCH("Modem Playback Switch", IDX_MIXER_MODEMOUT, 15, 1),
|
|
AZF3328_MIXER_VOL_MONO("Modem Playback Volume", IDX_MIXER_MODEMOUT, 0x1f, 1),
|
|
AZF3328_MIXER_SWITCH("Modem Capture Switch", IDX_MIXER_MODEMIN, 15, 1),
|
|
AZF3328_MIXER_VOL_MONO("Modem Capture Volume", IDX_MIXER_MODEMIN, 0x1f, 1),
|
|
AZF3328_MIXER_ENUM("Mic Select", IDX_MIXER_ADVCTL2, 2, 8),
|
|
AZF3328_MIXER_ENUM("Mono Output Select", IDX_MIXER_ADVCTL2, 2, 9),
|
|
AZF3328_MIXER_ENUM("PCM Output Route", IDX_MIXER_ADVCTL2, 2, 15), /* PCM Out Path, place in front since it controls *both* 3D and Bass/Treble! */
|
|
AZF3328_MIXER_VOL_SPECIAL("Tone Control - Treble", IDX_MIXER_BASSTREBLE, 0x07, 1, 0),
|
|
AZF3328_MIXER_VOL_SPECIAL("Tone Control - Bass", IDX_MIXER_BASSTREBLE, 0x07, 9, 0),
|
|
AZF3328_MIXER_SWITCH("3D Control - Switch", IDX_MIXER_ADVCTL2, 13, 0),
|
|
AZF3328_MIXER_VOL_SPECIAL("3D Control - Width", IDX_MIXER_ADVCTL1, 0x07, 1, 0), /* "3D Width" */
|
|
AZF3328_MIXER_VOL_SPECIAL("3D Control - Depth", IDX_MIXER_ADVCTL1, 0x03, 8, 0), /* "Hifi 3D" */
|
|
#if MIXER_TESTING
|
|
AZF3328_MIXER_SWITCH("0", IDX_MIXER_ADVCTL2, 0, 0),
|
|
AZF3328_MIXER_SWITCH("1", IDX_MIXER_ADVCTL2, 1, 0),
|
|
AZF3328_MIXER_SWITCH("2", IDX_MIXER_ADVCTL2, 2, 0),
|
|
AZF3328_MIXER_SWITCH("3", IDX_MIXER_ADVCTL2, 3, 0),
|
|
AZF3328_MIXER_SWITCH("4", IDX_MIXER_ADVCTL2, 4, 0),
|
|
AZF3328_MIXER_SWITCH("5", IDX_MIXER_ADVCTL2, 5, 0),
|
|
AZF3328_MIXER_SWITCH("6", IDX_MIXER_ADVCTL2, 6, 0),
|
|
AZF3328_MIXER_SWITCH("7", IDX_MIXER_ADVCTL2, 7, 0),
|
|
AZF3328_MIXER_SWITCH("8", IDX_MIXER_ADVCTL2, 8, 0),
|
|
AZF3328_MIXER_SWITCH("9", IDX_MIXER_ADVCTL2, 9, 0),
|
|
AZF3328_MIXER_SWITCH("10", IDX_MIXER_ADVCTL2, 10, 0),
|
|
AZF3328_MIXER_SWITCH("11", IDX_MIXER_ADVCTL2, 11, 0),
|
|
AZF3328_MIXER_SWITCH("12", IDX_MIXER_ADVCTL2, 12, 0),
|
|
AZF3328_MIXER_SWITCH("13", IDX_MIXER_ADVCTL2, 13, 0),
|
|
AZF3328_MIXER_SWITCH("14", IDX_MIXER_ADVCTL2, 14, 0),
|
|
AZF3328_MIXER_SWITCH("15", IDX_MIXER_ADVCTL2, 15, 0),
|
|
#endif
|
|
};
|
|
|
|
static u16 __devinitdata snd_azf3328_init_values[][2] = {
|
|
{ IDX_MIXER_PLAY_MASTER, MIXER_MUTE_MASK|0x1f1f },
|
|
{ IDX_MIXER_MODEMOUT, MIXER_MUTE_MASK|0x1f1f },
|
|
{ IDX_MIXER_BASSTREBLE, 0x0000 },
|
|
{ IDX_MIXER_PCBEEP, MIXER_MUTE_MASK|0x1f1f },
|
|
{ IDX_MIXER_MODEMIN, MIXER_MUTE_MASK|0x1f1f },
|
|
{ IDX_MIXER_MIC, MIXER_MUTE_MASK|0x001f },
|
|
{ IDX_MIXER_LINEIN, MIXER_MUTE_MASK|0x1f1f },
|
|
{ IDX_MIXER_CDAUDIO, MIXER_MUTE_MASK|0x1f1f },
|
|
{ IDX_MIXER_VIDEO, MIXER_MUTE_MASK|0x1f1f },
|
|
{ IDX_MIXER_AUX, MIXER_MUTE_MASK|0x1f1f },
|
|
{ IDX_MIXER_WAVEOUT, MIXER_MUTE_MASK|0x1f1f },
|
|
{ IDX_MIXER_FMSYNTH, MIXER_MUTE_MASK|0x1f1f },
|
|
{ IDX_MIXER_REC_VOLUME, MIXER_MUTE_MASK|0x0707 },
|
|
};
|
|
|
|
static int __devinit
|
|
snd_azf3328_mixer_new(struct snd_azf3328 *chip)
|
|
{
|
|
struct snd_card *card;
|
|
const struct snd_kcontrol_new *sw;
|
|
unsigned int idx;
|
|
int err;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
snd_assert(chip != NULL && chip->card != NULL, return -EINVAL);
|
|
|
|
card = chip->card;
|
|
|
|
/* mixer reset */
|
|
snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000);
|
|
|
|
/* mute and zero volume channels */
|
|
for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_init_values); idx++) {
|
|
snd_azf3328_mixer_outw(chip,
|
|
snd_azf3328_init_values[idx][0],
|
|
snd_azf3328_init_values[idx][1]);
|
|
}
|
|
|
|
/* add mixer controls */
|
|
sw = snd_azf3328_mixer_controls;
|
|
for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_mixer_controls); idx++, sw++) {
|
|
if ((err = snd_ctl_add(chip->card, snd_ctl_new1(sw, chip))) < 0)
|
|
return err;
|
|
}
|
|
snd_component_add(card, "AZF3328 mixer");
|
|
strcpy(card->mixername, "AZF3328 mixer");
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *hw_params)
|
|
{
|
|
int res;
|
|
snd_azf3328_dbgcallenter();
|
|
res = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
|
|
snd_azf3328_dbgcallleave();
|
|
return res;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_hw_free(struct snd_pcm_substream *substream)
|
|
{
|
|
snd_azf3328_dbgcallenter();
|
|
snd_pcm_lib_free_pages(substream);
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
snd_azf3328_setfmt(struct snd_azf3328 *chip,
|
|
unsigned int reg,
|
|
unsigned int bitrate,
|
|
unsigned int format_width,
|
|
unsigned int channels
|
|
)
|
|
{
|
|
u16 val = 0xff00;
|
|
unsigned long flags;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
switch (bitrate) {
|
|
case 4000: val |= SOUNDFORMAT_FREQ_SUSPECTED_4000; break;
|
|
case 4800: val |= SOUNDFORMAT_FREQ_SUSPECTED_4800; break;
|
|
case 5512: val |= SOUNDFORMAT_FREQ_5510; break; /* the AZF3328 names it "5510" for some strange reason */
|
|
case 6620: val |= SOUNDFORMAT_FREQ_6620; break;
|
|
case 8000: val |= SOUNDFORMAT_FREQ_8000; break;
|
|
case 9600: val |= SOUNDFORMAT_FREQ_9600; break;
|
|
case 11025: val |= SOUNDFORMAT_FREQ_11025; break;
|
|
case 13240: val |= SOUNDFORMAT_FREQ_SUSPECTED_13240; break;
|
|
case 16000: val |= SOUNDFORMAT_FREQ_16000; break;
|
|
case 22050: val |= SOUNDFORMAT_FREQ_22050; break;
|
|
case 32000: val |= SOUNDFORMAT_FREQ_32000; break;
|
|
case 44100: val |= SOUNDFORMAT_FREQ_44100; break;
|
|
case 48000: val |= SOUNDFORMAT_FREQ_48000; break;
|
|
case 66200: val |= SOUNDFORMAT_FREQ_SUSPECTED_66200; break;
|
|
default:
|
|
snd_printk(KERN_WARNING "unknown bitrate %d, assuming 44.1kHz!\n", bitrate);
|
|
val |= SOUNDFORMAT_FREQ_44100;
|
|
break;
|
|
}
|
|
/* val = 0xff07; 3m27.993s (65301Hz; -> 64000Hz???) hmm, 66120, 65967, 66123 */
|
|
/* val = 0xff09; 17m15.098s (13123,478Hz; -> 12000Hz???) hmm, 13237.2Hz? */
|
|
/* val = 0xff0a; 47m30.599s (4764,891Hz; -> 4800Hz???) yup, 4803Hz */
|
|
/* val = 0xff0c; 57m0.510s (4010,263Hz; -> 4000Hz???) yup, 4003Hz */
|
|
/* val = 0xff05; 5m11.556s (... -> 44100Hz) */
|
|
/* val = 0xff03; 10m21.529s (21872,463Hz; -> 22050Hz???) */
|
|
/* val = 0xff0f; 20m41.883s (10937,993Hz; -> 11025Hz???) */
|
|
/* val = 0xff0d; 41m23.135s (5523,600Hz; -> 5512Hz???) */
|
|
/* val = 0xff0e; 28m30.777s (8017Hz; -> 8000Hz???) */
|
|
|
|
if (channels == 2)
|
|
val |= SOUNDFORMAT_FLAG_2CHANNELS;
|
|
|
|
if (format_width == 16)
|
|
val |= SOUNDFORMAT_FLAG_16BIT;
|
|
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
|
|
/* set bitrate/format */
|
|
snd_azf3328_codec_outw(chip, reg, val);
|
|
|
|
/* changing the bitrate/format settings switches off the
|
|
* audio output with an annoying click in case of 8/16bit format change
|
|
* (maybe shutting down DAC/ADC?), thus immediately
|
|
* do some tweaking to reenable it and get rid of the clicking
|
|
* (FIXME: yes, it works, but what exactly am I doing here?? :)
|
|
* FIXME: does this have some side effects for full-duplex
|
|
* or other dramatic side effects? */
|
|
if (reg == IDX_IO_PLAY_SOUNDFORMAT) /* only do it for playback */
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) |
|
|
DMA_PLAY_SOMETHING1 |
|
|
DMA_PLAY_SOMETHING2 |
|
|
SOMETHING_ALMOST_ALWAYS_SET |
|
|
DMA_EPILOGUE_SOMETHING |
|
|
DMA_SOMETHING_ELSE
|
|
);
|
|
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
snd_azf3328_dbgcallleave();
|
|
}
|
|
|
|
static void
|
|
snd_azf3328_setdmaa(struct snd_azf3328 *chip,
|
|
long unsigned int addr,
|
|
unsigned int count,
|
|
unsigned int size,
|
|
int do_recording)
|
|
{
|
|
unsigned long flags, portbase;
|
|
unsigned int is_running;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
if (do_recording) {
|
|
/* access capture registers, i.e. skip playback reg section */
|
|
portbase = chip->codec_port + 0x20;
|
|
is_running = chip->is_recording;
|
|
} else {
|
|
/* access the playback register section */
|
|
portbase = chip->codec_port + 0x00;
|
|
is_running = chip->is_playing;
|
|
}
|
|
|
|
/* AZF3328 uses a two buffer pointer DMA playback approach */
|
|
if (!is_running) {
|
|
unsigned long addr_area2;
|
|
unsigned long count_areas, count_tmp; /* width 32bit -- overflow!! */
|
|
count_areas = size/2;
|
|
addr_area2 = addr+count_areas;
|
|
count_areas--; /* max. index */
|
|
snd_azf3328_dbgplay("set DMA: buf1 %08lx[%lu], buf2 %08lx[%lu]\n", addr, count_areas, addr_area2, count_areas);
|
|
|
|
/* build combined I/O buffer length word */
|
|
count_tmp = count_areas;
|
|
count_areas |= (count_tmp << 16);
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
outl(addr, portbase + IDX_IO_PLAY_DMA_START_1);
|
|
outl(addr_area2, portbase + IDX_IO_PLAY_DMA_START_2);
|
|
outl(count_areas, portbase + IDX_IO_PLAY_DMA_LEN_1);
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
}
|
|
snd_azf3328_dbgcallleave();
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_playback_prepare(struct snd_pcm_substream *substream)
|
|
{
|
|
#if 0
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
unsigned int size = snd_pcm_lib_buffer_bytes(substream);
|
|
unsigned int count = snd_pcm_lib_period_bytes(substream);
|
|
#endif
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
#if 0
|
|
snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT,
|
|
runtime->rate,
|
|
snd_pcm_format_width(runtime->format),
|
|
runtime->channels);
|
|
snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, 0);
|
|
#endif
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_capture_prepare(struct snd_pcm_substream *substream)
|
|
{
|
|
#if 0
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
unsigned int size = snd_pcm_lib_buffer_bytes(substream);
|
|
unsigned int count = snd_pcm_lib_period_bytes(substream);
|
|
#endif
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
#if 0
|
|
snd_azf3328_setfmt(chip, IDX_IO_REC_SOUNDFORMAT,
|
|
runtime->rate,
|
|
snd_pcm_format_width(runtime->format),
|
|
runtime->channels);
|
|
snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, 1);
|
|
#endif
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd)
|
|
{
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
int result = 0;
|
|
unsigned int status1;
|
|
|
|
snd_azf3328_dbgcalls("snd_azf3328_playback_trigger cmd %d\n", cmd);
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
snd_azf3328_dbgplay("START PLAYBACK\n");
|
|
|
|
/* mute WaveOut */
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
|
|
|
|
snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT,
|
|
runtime->rate,
|
|
snd_pcm_format_width(runtime->format),
|
|
runtime->channels);
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
/* stop playback */
|
|
status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS);
|
|
status1 &= ~DMA_RESUME;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
|
|
|
/* FIXME: clear interrupts or what??? */
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_IRQTYPE, 0xffff);
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
snd_azf3328_setdmaa(chip, runtime->dma_addr,
|
|
snd_pcm_lib_period_bytes(substream),
|
|
snd_pcm_lib_buffer_bytes(substream),
|
|
0);
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
#ifdef WIN9X
|
|
/* FIXME: enable playback/recording??? */
|
|
status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
|
|
|
/* start playback again */
|
|
/* FIXME: what is this value (0x0010)??? */
|
|
status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
|
#else /* NT4 */
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
0x0000);
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
DMA_PLAY_SOMETHING1);
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
DMA_PLAY_SOMETHING1 |
|
|
DMA_PLAY_SOMETHING2);
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
DMA_RESUME |
|
|
SOMETHING_ALMOST_ALWAYS_SET |
|
|
DMA_EPILOGUE_SOMETHING |
|
|
DMA_SOMETHING_ELSE);
|
|
#endif
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
/* now unmute WaveOut */
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0);
|
|
|
|
chip->is_playing = 1;
|
|
snd_azf3328_dbgplay("STARTED PLAYBACK\n");
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
snd_azf3328_dbgplay("RESUME PLAYBACK\n");
|
|
/* resume playback if we were active */
|
|
if (chip->is_playing)
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) | DMA_RESUME);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
snd_azf3328_dbgplay("STOP PLAYBACK\n");
|
|
|
|
/* mute WaveOut */
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
/* stop playback */
|
|
status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS);
|
|
|
|
status1 &= ~DMA_RESUME;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
|
|
|
/* hmm, is this really required? we're resetting the same bit
|
|
* immediately thereafter... */
|
|
status1 |= DMA_PLAY_SOMETHING1;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
|
|
|
status1 &= ~DMA_PLAY_SOMETHING1;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
/* now unmute WaveOut */
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0);
|
|
chip->is_playing = 0;
|
|
snd_azf3328_dbgplay("STOPPED PLAYBACK\n");
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
snd_azf3328_dbgplay("SUSPEND PLAYBACK\n");
|
|
/* make sure playback is stopped */
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) & ~DMA_RESUME);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "FIXME: unknown trigger mode!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
return result;
|
|
}
|
|
|
|
/* this is just analogous to playback; I'm not quite sure whether recording
|
|
* should actually be triggered like that */
|
|
static int
|
|
snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd)
|
|
{
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
int result = 0;
|
|
unsigned int status1;
|
|
|
|
snd_azf3328_dbgcalls("snd_azf3328_capture_trigger cmd %d\n", cmd);
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
|
|
snd_azf3328_dbgplay("START CAPTURE\n");
|
|
|
|
snd_azf3328_setfmt(chip, IDX_IO_REC_SOUNDFORMAT,
|
|
runtime->rate,
|
|
snd_pcm_format_width(runtime->format),
|
|
runtime->channels);
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
/* stop recording */
|
|
status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS);
|
|
status1 &= ~DMA_RESUME;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
|
|
|
/* FIXME: clear interrupts or what??? */
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_IRQTYPE, 0xffff);
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
snd_azf3328_setdmaa(chip, runtime->dma_addr,
|
|
snd_pcm_lib_period_bytes(substream),
|
|
snd_pcm_lib_buffer_bytes(substream),
|
|
1);
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
#ifdef WIN9X
|
|
/* FIXME: enable playback/recording??? */
|
|
status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
|
|
|
/* start capture again */
|
|
/* FIXME: what is this value (0x0010)??? */
|
|
status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
|
#else
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
0x0000);
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
DMA_PLAY_SOMETHING1);
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
DMA_PLAY_SOMETHING1 |
|
|
DMA_PLAY_SOMETHING2);
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
DMA_RESUME |
|
|
SOMETHING_ALMOST_ALWAYS_SET |
|
|
DMA_EPILOGUE_SOMETHING |
|
|
DMA_SOMETHING_ELSE);
|
|
#endif
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
chip->is_recording = 1;
|
|
snd_azf3328_dbgplay("STARTED CAPTURE\n");
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
snd_azf3328_dbgplay("RESUME CAPTURE\n");
|
|
/* resume recording if we were active */
|
|
if (chip->is_recording)
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) | DMA_RESUME);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
snd_azf3328_dbgplay("STOP CAPTURE\n");
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
/* stop recording */
|
|
status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS);
|
|
|
|
status1 &= ~DMA_RESUME;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
|
|
|
status1 |= DMA_PLAY_SOMETHING1;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
|
|
|
status1 &= ~DMA_PLAY_SOMETHING1;
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
chip->is_recording = 0;
|
|
snd_azf3328_dbgplay("STOPPED CAPTURE\n");
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
snd_azf3328_dbgplay("SUSPEND CAPTURE\n");
|
|
/* make sure recording is stopped */
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) & ~DMA_RESUME);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "FIXME: unknown trigger mode!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
return result;
|
|
}
|
|
|
|
static snd_pcm_uframes_t
|
|
snd_azf3328_playback_pointer(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
unsigned long bufptr, result;
|
|
snd_pcm_uframes_t frmres;
|
|
|
|
#ifdef QUERY_HARDWARE
|
|
bufptr = inl(chip->codec_port+IDX_IO_PLAY_DMA_START_1);
|
|
#else
|
|
bufptr = substream->runtime->dma_addr;
|
|
#endif
|
|
result = inl(chip->codec_port+IDX_IO_PLAY_DMA_CURRPOS);
|
|
|
|
/* calculate offset */
|
|
result -= bufptr;
|
|
frmres = bytes_to_frames( substream->runtime, result);
|
|
snd_azf3328_dbgplay("PLAY @ 0x%8lx, frames %8ld\n", result, frmres);
|
|
return frmres;
|
|
}
|
|
|
|
static snd_pcm_uframes_t
|
|
snd_azf3328_capture_pointer(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
unsigned long bufptr, result;
|
|
snd_pcm_uframes_t frmres;
|
|
|
|
#ifdef QUERY_HARDWARE
|
|
bufptr = inl(chip->codec_port+IDX_IO_REC_DMA_START_1);
|
|
#else
|
|
bufptr = substream->runtime->dma_addr;
|
|
#endif
|
|
result = inl(chip->codec_port+IDX_IO_REC_DMA_CURRPOS);
|
|
|
|
/* calculate offset */
|
|
result -= bufptr;
|
|
frmres = bytes_to_frames( substream->runtime, result);
|
|
snd_azf3328_dbgplay("REC @ 0x%8lx, frames %8ld\n", result, frmres);
|
|
return frmres;
|
|
}
|
|
|
|
static irqreturn_t
|
|
snd_azf3328_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct snd_azf3328 *chip = dev_id;
|
|
u8 status, which;
|
|
static unsigned long irq_count;
|
|
|
|
status = snd_azf3328_codec_inb(chip, IDX_IO_IRQSTATUS);
|
|
|
|
/* fast path out, to ease interrupt sharing */
|
|
if (!(status & (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_MPU401|IRQ_TIMER)))
|
|
return IRQ_NONE; /* must be interrupt for another device */
|
|
|
|
snd_azf3328_dbgplay("Interrupt %ld!\nIDX_IO_PLAY_FLAGS %04x, IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n",
|
|
irq_count,
|
|
snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS),
|
|
snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE),
|
|
status);
|
|
|
|
if (status & IRQ_TIMER) {
|
|
/* snd_azf3328_dbgplay("timer %ld\n", inl(chip->codec_port+IDX_IO_TIMER_VALUE) & TIMER_VALUE_MASK); */
|
|
if (chip->timer)
|
|
snd_timer_interrupt(chip->timer, chip->timer->sticks);
|
|
/* ACK timer */
|
|
spin_lock(&chip->reg_lock);
|
|
snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x07);
|
|
spin_unlock(&chip->reg_lock);
|
|
snd_azf3328_dbgplay("azt3328: timer IRQ\n");
|
|
}
|
|
if (status & IRQ_PLAYBACK) {
|
|
spin_lock(&chip->reg_lock);
|
|
which = snd_azf3328_codec_inb(chip, IDX_IO_PLAY_IRQTYPE);
|
|
/* ack all IRQ types immediately */
|
|
snd_azf3328_codec_outb(chip, IDX_IO_PLAY_IRQTYPE, which);
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
if (chip->pcm && chip->playback_substream) {
|
|
snd_pcm_period_elapsed(chip->playback_substream);
|
|
snd_azf3328_dbgplay("PLAY period done (#%x), @ %x\n",
|
|
which,
|
|
inl(chip->codec_port+IDX_IO_PLAY_DMA_CURRPOS));
|
|
} else
|
|
snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n");
|
|
if (which & IRQ_PLAY_SOMETHING)
|
|
snd_azf3328_dbgplay("azt3328: unknown play IRQ type occurred, please report!\n");
|
|
}
|
|
if (status & IRQ_RECORDING) {
|
|
spin_lock(&chip->reg_lock);
|
|
which = snd_azf3328_codec_inb(chip, IDX_IO_REC_IRQTYPE);
|
|
/* ack all IRQ types immediately */
|
|
snd_azf3328_codec_outb(chip, IDX_IO_REC_IRQTYPE, which);
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
if (chip->pcm && chip->capture_substream) {
|
|
snd_pcm_period_elapsed(chip->capture_substream);
|
|
snd_azf3328_dbgplay("REC period done (#%x), @ %x\n",
|
|
which,
|
|
inl(chip->codec_port+IDX_IO_REC_DMA_CURRPOS));
|
|
} else
|
|
snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n");
|
|
if (which & IRQ_REC_SOMETHING)
|
|
snd_azf3328_dbgplay("azt3328: unknown rec IRQ type occurred, please report!\n");
|
|
}
|
|
/* MPU401 has less critical IRQ requirements
|
|
* than timer and playback/recording, right? */
|
|
if (status & IRQ_MPU401) {
|
|
snd_mpu401_uart_interrupt(irq, chip->rmidi->private_data);
|
|
|
|
/* hmm, do we have to ack the IRQ here somehow?
|
|
* If so, then I don't know how... */
|
|
snd_azf3328_dbgplay("azt3328: MPU401 IRQ\n");
|
|
}
|
|
irq_count++;
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*****************************************************************/
|
|
|
|
static const struct snd_pcm_hardware snd_azf3328_playback =
|
|
{
|
|
/* FIXME!! Correct? */
|
|
.info = SNDRV_PCM_INFO_MMAP |
|
|
SNDRV_PCM_INFO_INTERLEAVED |
|
|
SNDRV_PCM_INFO_MMAP_VALID,
|
|
.formats = SNDRV_PCM_FMTBIT_S8 |
|
|
SNDRV_PCM_FMTBIT_U8 |
|
|
SNDRV_PCM_FMTBIT_S16_LE |
|
|
SNDRV_PCM_FMTBIT_U16_LE,
|
|
.rates = SNDRV_PCM_RATE_5512 |
|
|
SNDRV_PCM_RATE_8000_48000 |
|
|
SNDRV_PCM_RATE_KNOT,
|
|
.rate_min = 4000,
|
|
.rate_max = 66200,
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.buffer_bytes_max = 65536,
|
|
.period_bytes_min = 64,
|
|
.period_bytes_max = 65536,
|
|
.periods_min = 1,
|
|
.periods_max = 1024,
|
|
/* FIXME: maybe that card actually has a FIFO?
|
|
* Hmm, it seems newer revisions do have one, but we still don't know
|
|
* its size... */
|
|
.fifo_size = 0,
|
|
};
|
|
|
|
static const struct snd_pcm_hardware snd_azf3328_capture =
|
|
{
|
|
/* FIXME */
|
|
.info = SNDRV_PCM_INFO_MMAP |
|
|
SNDRV_PCM_INFO_INTERLEAVED |
|
|
SNDRV_PCM_INFO_MMAP_VALID,
|
|
.formats = SNDRV_PCM_FMTBIT_S8 |
|
|
SNDRV_PCM_FMTBIT_U8 |
|
|
SNDRV_PCM_FMTBIT_S16_LE |
|
|
SNDRV_PCM_FMTBIT_U16_LE,
|
|
.rates = SNDRV_PCM_RATE_5512 |
|
|
SNDRV_PCM_RATE_8000_48000 |
|
|
SNDRV_PCM_RATE_KNOT,
|
|
.rate_min = 4000,
|
|
.rate_max = 66200,
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.buffer_bytes_max = 65536,
|
|
.period_bytes_min = 64,
|
|
.period_bytes_max = 65536,
|
|
.periods_min = 1,
|
|
.periods_max = 1024,
|
|
.fifo_size = 0,
|
|
};
|
|
|
|
|
|
static unsigned int snd_azf3328_fixed_rates[] = {
|
|
4000, 4800, 5512, 6620, 8000, 9600, 11025, 13240, 16000, 22050, 32000,
|
|
44100, 48000, 66200 };
|
|
static struct snd_pcm_hw_constraint_list snd_azf3328_hw_constraints_rates = {
|
|
.count = ARRAY_SIZE(snd_azf3328_fixed_rates),
|
|
.list = snd_azf3328_fixed_rates,
|
|
.mask = 0,
|
|
};
|
|
|
|
/*****************************************************************/
|
|
|
|
static int
|
|
snd_azf3328_playback_open(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
chip->playback_substream = substream;
|
|
runtime->hw = snd_azf3328_playback;
|
|
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
|
|
&snd_azf3328_hw_constraints_rates);
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_capture_open(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
chip->capture_substream = substream;
|
|
runtime->hw = snd_azf3328_capture;
|
|
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
|
|
&snd_azf3328_hw_constraints_rates);
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_playback_close(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
chip->playback_substream = NULL;
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_capture_close(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
chip->capture_substream = NULL;
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************/
|
|
|
|
static struct snd_pcm_ops snd_azf3328_playback_ops = {
|
|
.open = snd_azf3328_playback_open,
|
|
.close = snd_azf3328_playback_close,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = snd_azf3328_hw_params,
|
|
.hw_free = snd_azf3328_hw_free,
|
|
.prepare = snd_azf3328_playback_prepare,
|
|
.trigger = snd_azf3328_playback_trigger,
|
|
.pointer = snd_azf3328_playback_pointer
|
|
};
|
|
|
|
static struct snd_pcm_ops snd_azf3328_capture_ops = {
|
|
.open = snd_azf3328_capture_open,
|
|
.close = snd_azf3328_capture_close,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = snd_azf3328_hw_params,
|
|
.hw_free = snd_azf3328_hw_free,
|
|
.prepare = snd_azf3328_capture_prepare,
|
|
.trigger = snd_azf3328_capture_trigger,
|
|
.pointer = snd_azf3328_capture_pointer
|
|
};
|
|
|
|
static int __devinit
|
|
snd_azf3328_pcm(struct snd_azf3328 *chip, int device)
|
|
{
|
|
struct snd_pcm *pcm;
|
|
int err;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
if ((err = snd_pcm_new(chip->card, "AZF3328 DSP", device, 1, 1, &pcm)) < 0)
|
|
return err;
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_azf3328_playback_ops);
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_azf3328_capture_ops);
|
|
|
|
pcm->private_data = chip;
|
|
pcm->info_flags = 0;
|
|
strcpy(pcm->name, chip->card->shortname);
|
|
chip->pcm = pcm;
|
|
|
|
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
|
|
snd_dma_pci_data(chip->pci), 64*1024, 64*1024);
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************/
|
|
|
|
#ifdef SUPPORT_JOYSTICK
|
|
static int __devinit
|
|
snd_azf3328_config_joystick(struct snd_azf3328 *chip, int dev)
|
|
{
|
|
struct gameport *gp;
|
|
struct resource *r;
|
|
|
|
if (!joystick[dev])
|
|
return -ENODEV;
|
|
|
|
if (!(r = request_region(0x200, 8, "AZF3328 gameport"))) {
|
|
printk(KERN_WARNING "azt3328: cannot reserve joystick ports\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
chip->gameport = gp = gameport_allocate_port();
|
|
if (!gp) {
|
|
printk(KERN_ERR "azt3328: cannot allocate memory for gameport\n");
|
|
release_and_free_resource(r);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
gameport_set_name(gp, "AZF3328 Gameport");
|
|
gameport_set_phys(gp, "pci%s/gameport0", pci_name(chip->pci));
|
|
gameport_set_dev_parent(gp, &chip->pci->dev);
|
|
gp->io = 0x200;
|
|
gameport_set_port_data(gp, r);
|
|
|
|
snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR,
|
|
snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) | LEGACY_JOY);
|
|
|
|
gameport_register_port(chip->gameport);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
snd_azf3328_free_joystick(struct snd_azf3328 *chip)
|
|
{
|
|
if (chip->gameport) {
|
|
struct resource *r = gameport_get_port_data(chip->gameport);
|
|
|
|
gameport_unregister_port(chip->gameport);
|
|
chip->gameport = NULL;
|
|
/* disable gameport */
|
|
snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR,
|
|
snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) & ~LEGACY_JOY);
|
|
release_and_free_resource(r);
|
|
}
|
|
}
|
|
#else
|
|
static inline int
|
|
snd_azf3328_config_joystick(struct snd_azf3328 *chip, int dev) { return -ENOSYS; }
|
|
static inline void
|
|
snd_azf3328_free_joystick(struct snd_azf3328 *chip) { }
|
|
#endif
|
|
|
|
/******************************************************************/
|
|
|
|
static int
|
|
snd_azf3328_free(struct snd_azf3328 *chip)
|
|
{
|
|
if (chip->irq < 0)
|
|
goto __end_hw;
|
|
|
|
/* reset (close) mixer */
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1); /* first mute master volume */
|
|
snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000);
|
|
|
|
/* interrupt setup - mask everything (FIXME!) */
|
|
/* well, at least we know how to disable the timer IRQ */
|
|
snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x00);
|
|
|
|
if (chip->irq >= 0)
|
|
synchronize_irq(chip->irq);
|
|
__end_hw:
|
|
snd_azf3328_free_joystick(chip);
|
|
if (chip->irq >= 0)
|
|
free_irq(chip->irq, chip);
|
|
pci_release_regions(chip->pci);
|
|
pci_disable_device(chip->pci);
|
|
|
|
kfree(chip);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_dev_free(struct snd_device *device)
|
|
{
|
|
struct snd_azf3328 *chip = device->device_data;
|
|
return snd_azf3328_free(chip);
|
|
}
|
|
|
|
/******************************************************************/
|
|
|
|
/*** NOTE: the physical timer resolution actually is 1024000 ticks per second,
|
|
*** but announcing those attributes to user-space would make programs
|
|
*** configure the timer to a 1 tick value, resulting in an absolutely fatal
|
|
*** timer IRQ storm.
|
|
*** Thus I chose to announce a down-scaled virtual timer to the outside and
|
|
*** calculate real timer countdown values internally.
|
|
*** (the scale factor can be set via module parameter "seqtimer_scaling").
|
|
***/
|
|
|
|
static int
|
|
snd_azf3328_timer_start(struct snd_timer *timer)
|
|
{
|
|
struct snd_azf3328 *chip;
|
|
unsigned long flags;
|
|
unsigned int delay;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
chip = snd_timer_chip(timer);
|
|
delay = ((timer->sticks * seqtimer_scaling) - 1) & TIMER_VALUE_MASK;
|
|
if (delay < 49) {
|
|
/* uhoh, that's not good, since user-space won't know about
|
|
* this timing tweak
|
|
* (we need to do it to avoid a lockup, though) */
|
|
|
|
snd_azf3328_dbgtimer("delay was too low (%d)!\n", delay);
|
|
delay = 49; /* minimum time is 49 ticks */
|
|
}
|
|
snd_azf3328_dbgtimer("setting timer countdown value %d, add COUNTDOWN|IRQ\n", delay);
|
|
delay |= TIMER_ENABLE_COUNTDOWN | TIMER_ENABLE_IRQ;
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
snd_azf3328_codec_outl(chip, IDX_IO_TIMER_VALUE, delay);
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_timer_stop(struct snd_timer *timer)
|
|
{
|
|
struct snd_azf3328 *chip;
|
|
unsigned long flags;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
chip = snd_timer_chip(timer);
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
/* disable timer countdown and interrupt */
|
|
/* FIXME: should we write TIMER_ACK_IRQ here? */
|
|
snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0);
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
snd_azf3328_timer_precise_resolution(struct snd_timer *timer,
|
|
unsigned long *num, unsigned long *den)
|
|
{
|
|
snd_azf3328_dbgcallenter();
|
|
*num = 1;
|
|
*den = 1024000 / seqtimer_scaling;
|
|
snd_azf3328_dbgcallleave();
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_timer_hardware snd_azf3328_timer_hw = {
|
|
.flags = SNDRV_TIMER_HW_AUTO,
|
|
.resolution = 977, /* 1000000/1024000 = 0.9765625us */
|
|
.ticks = 1024000, /* max tick count, defined by the value register; actually it's not 1024000, but 1048576, but we don't care */
|
|
.start = snd_azf3328_timer_start,
|
|
.stop = snd_azf3328_timer_stop,
|
|
.precise_resolution = snd_azf3328_timer_precise_resolution,
|
|
};
|
|
|
|
static int __devinit
|
|
snd_azf3328_timer(struct snd_azf3328 *chip, int device)
|
|
{
|
|
struct snd_timer *timer = NULL;
|
|
struct snd_timer_id tid;
|
|
int err;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
tid.dev_class = SNDRV_TIMER_CLASS_CARD;
|
|
tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE;
|
|
tid.card = chip->card->number;
|
|
tid.device = device;
|
|
tid.subdevice = 0;
|
|
|
|
snd_azf3328_timer_hw.resolution *= seqtimer_scaling;
|
|
snd_azf3328_timer_hw.ticks /= seqtimer_scaling;
|
|
if ((err = snd_timer_new(chip->card, "AZF3328", &tid, &timer)) < 0) {
|
|
goto out;
|
|
}
|
|
|
|
strcpy(timer->name, "AZF3328 timer");
|
|
timer->private_data = chip;
|
|
timer->hw = snd_azf3328_timer_hw;
|
|
|
|
chip->timer = timer;
|
|
|
|
err = 0;
|
|
|
|
out:
|
|
snd_azf3328_dbgcallleave();
|
|
return err;
|
|
}
|
|
|
|
/******************************************************************/
|
|
|
|
#if 0
|
|
/* check whether a bit can be modified */
|
|
static void
|
|
snd_azf3328_test_bit(unsigned int reg, int bit)
|
|
{
|
|
unsigned char val, valoff, valon;
|
|
|
|
val = inb(reg);
|
|
|
|
outb(val & ~(1 << bit), reg);
|
|
valoff = inb(reg);
|
|
|
|
outb(val|(1 << bit), reg);
|
|
valon = inb(reg);
|
|
|
|
outb(val, reg);
|
|
|
|
printk(KERN_ERR "reg %04x bit %d: %02x %02x %02x\n", reg, bit, val, valoff, valon);
|
|
}
|
|
#endif
|
|
|
|
#if DEBUG_MISC
|
|
static void
|
|
snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip)
|
|
{
|
|
u16 tmp;
|
|
|
|
snd_azf3328_dbgmisc("codec_port 0x%lx, io2_port 0x%lx, mpu_port 0x%lx, synth_port 0x%lx, mixer_port 0x%lx, irq %d\n", chip->codec_port, chip->io2_port, chip->mpu_port, chip->synth_port, chip->mixer_port, chip->irq);
|
|
|
|
snd_azf3328_dbgmisc("io2 %02x %02x %02x %02x %02x %02x\n", snd_azf3328_io2_inb(chip, 0), snd_azf3328_io2_inb(chip, 1), snd_azf3328_io2_inb(chip, 2), snd_azf3328_io2_inb(chip, 3), snd_azf3328_io2_inb(chip, 4), snd_azf3328_io2_inb(chip, 5));
|
|
|
|
for (tmp=0; tmp <= 0x01; tmp += 1)
|
|
snd_azf3328_dbgmisc("0x%02x: opl 0x%04x, mpu300 0x%04x, mpu310 0x%04x, mpu320 0x%04x, mpu330 0x%04x\n", tmp, inb(0x388 + tmp), inb(0x300 + tmp), inb(0x310 + tmp), inb(0x320 + tmp), inb(0x330 + tmp));
|
|
|
|
for (tmp = 0; tmp < AZF_IO_SIZE_CODEC; tmp += 2)
|
|
snd_azf3328_dbgmisc("codec 0x%02x: 0x%04x\n", tmp, snd_azf3328_codec_inw(chip, tmp));
|
|
|
|
for (tmp = 0; tmp < AZF_IO_SIZE_MIXER; tmp += 2)
|
|
snd_azf3328_dbgmisc("mixer 0x%02x: 0x%04x\n", tmp, snd_azf3328_mixer_inw(chip, tmp));
|
|
}
|
|
#else
|
|
static inline void
|
|
snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip) {}
|
|
#endif
|
|
|
|
static int __devinit
|
|
snd_azf3328_create(struct snd_card *card,
|
|
struct pci_dev *pci,
|
|
unsigned long device_type,
|
|
struct snd_azf3328 ** rchip)
|
|
{
|
|
struct snd_azf3328 *chip;
|
|
int err;
|
|
static struct snd_device_ops ops = {
|
|
.dev_free = snd_azf3328_dev_free,
|
|
};
|
|
u16 tmp;
|
|
|
|
*rchip = NULL;
|
|
|
|
if ((err = pci_enable_device(pci)) < 0)
|
|
return err;
|
|
|
|
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
|
|
if (chip == NULL) {
|
|
err = -ENOMEM;
|
|
goto out_err;
|
|
}
|
|
spin_lock_init(&chip->reg_lock);
|
|
chip->card = card;
|
|
chip->pci = pci;
|
|
chip->irq = -1;
|
|
|
|
/* check if we can restrict PCI DMA transfers to 24 bits */
|
|
if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
|
|
pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
|
|
snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
|
|
err = -ENXIO;
|
|
goto out_err;
|
|
}
|
|
|
|
if ((err = pci_request_regions(pci, "Aztech AZF3328")) < 0) {
|
|
goto out_err;
|
|
}
|
|
|
|
chip->codec_port = pci_resource_start(pci, 0);
|
|
chip->io2_port = pci_resource_start(pci, 1);
|
|
chip->mpu_port = pci_resource_start(pci, 2);
|
|
chip->synth_port = pci_resource_start(pci, 3);
|
|
chip->mixer_port = pci_resource_start(pci, 4);
|
|
|
|
if (request_irq(pci->irq, snd_azf3328_interrupt,
|
|
IRQF_SHARED, card->shortname, chip)) {
|
|
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
|
|
err = -EBUSY;
|
|
goto out_err;
|
|
}
|
|
chip->irq = pci->irq;
|
|
pci_set_master(pci);
|
|
synchronize_irq(chip->irq);
|
|
|
|
snd_azf3328_debug_show_ports(chip);
|
|
|
|
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
|
|
goto out_err;
|
|
}
|
|
|
|
/* create mixer interface & switches */
|
|
if ((err = snd_azf3328_mixer_new(chip)) < 0)
|
|
goto out_err;
|
|
|
|
#if 0
|
|
/* set very low bitrate to reduce noise and power consumption? */
|
|
snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, 5512, 8, 1);
|
|
#endif
|
|
|
|
/* standard chip init stuff */
|
|
/* default IRQ init value */
|
|
tmp = DMA_PLAY_SOMETHING2|DMA_EPILOGUE_SOMETHING|DMA_SOMETHING_ELSE;
|
|
|
|
spin_lock_irq(&chip->reg_lock);
|
|
snd_azf3328_codec_outb(chip, IDX_IO_PLAY_FLAGS, tmp);
|
|
snd_azf3328_codec_outb(chip, IDX_IO_REC_FLAGS, tmp);
|
|
snd_azf3328_codec_outb(chip, IDX_IO_SOMETHING_FLAGS, tmp);
|
|
snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x00); /* disable timer */
|
|
spin_unlock_irq(&chip->reg_lock);
|
|
|
|
snd_card_set_dev(card, &pci->dev);
|
|
|
|
*rchip = chip;
|
|
|
|
err = 0;
|
|
goto out;
|
|
|
|
out_err:
|
|
if (chip)
|
|
snd_azf3328_free(chip);
|
|
pci_disable_device(pci);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int __devinit
|
|
snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
|
|
{
|
|
static int dev;
|
|
struct snd_card *card;
|
|
struct snd_azf3328 *chip;
|
|
struct snd_opl3 *opl3;
|
|
int err;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
if (dev >= SNDRV_CARDS)
|
|
return -ENODEV;
|
|
if (!enable[dev]) {
|
|
dev++;
|
|
return -ENOENT;
|
|
}
|
|
|
|
card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0 );
|
|
if (card == NULL)
|
|
return -ENOMEM;
|
|
|
|
strcpy(card->driver, "AZF3328");
|
|
strcpy(card->shortname, "Aztech AZF3328 (PCI168)");
|
|
|
|
if ((err = snd_azf3328_create(card, pci, pci_id->driver_data, &chip)) < 0) {
|
|
goto out_err;
|
|
}
|
|
|
|
card->private_data = chip;
|
|
|
|
if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_MPU401,
|
|
chip->mpu_port, MPU401_INFO_INTEGRATED,
|
|
pci->irq, 0, &chip->rmidi)) < 0) {
|
|
snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port);
|
|
goto out_err;
|
|
}
|
|
|
|
if ((err = snd_azf3328_timer(chip, 0)) < 0) {
|
|
goto out_err;
|
|
}
|
|
|
|
if ((err = snd_azf3328_pcm(chip, 0)) < 0) {
|
|
goto out_err;
|
|
}
|
|
|
|
if (snd_opl3_create(card, chip->synth_port, chip->synth_port+2,
|
|
OPL3_HW_AUTO, 1, &opl3) < 0) {
|
|
snd_printk(KERN_ERR "azf3328: no OPL3 device at 0x%lx-0x%lx?\n",
|
|
chip->synth_port, chip->synth_port+2 );
|
|
} else {
|
|
if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) {
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
opl3->private_data = chip;
|
|
|
|
sprintf(card->longname, "%s at 0x%lx, irq %i",
|
|
card->shortname, chip->codec_port, chip->irq);
|
|
|
|
if ((err = snd_card_register(card)) < 0) {
|
|
goto out_err;
|
|
}
|
|
|
|
#ifdef MODULE
|
|
printk(
|
|
"azt3328: Sound driver for Aztech AZF3328-based soundcards such as PCI168.\n"
|
|
"azt3328: Hardware was completely undocumented, unfortunately.\n"
|
|
"azt3328: Feel free to contact andi AT lisas.de for bug reports etc.!\n"
|
|
"azt3328: User-scalable sequencer timer set to %dHz (1024000Hz / %d).\n",
|
|
1024000 / seqtimer_scaling, seqtimer_scaling);
|
|
#endif
|
|
|
|
if (snd_azf3328_config_joystick(chip, dev) < 0)
|
|
snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR,
|
|
snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) & ~LEGACY_JOY);
|
|
|
|
pci_set_drvdata(pci, card);
|
|
dev++;
|
|
|
|
err = 0;
|
|
goto out;
|
|
|
|
out_err:
|
|
snd_card_free(card);
|
|
|
|
out:
|
|
snd_azf3328_dbgcallleave();
|
|
return err;
|
|
}
|
|
|
|
static void __devexit
|
|
snd_azf3328_remove(struct pci_dev *pci)
|
|
{
|
|
snd_azf3328_dbgcallenter();
|
|
snd_card_free(pci_get_drvdata(pci));
|
|
pci_set_drvdata(pci, NULL);
|
|
snd_azf3328_dbgcallleave();
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int
|
|
snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state)
|
|
{
|
|
struct snd_card *card = pci_get_drvdata(pci);
|
|
struct snd_azf3328 *chip = card->private_data;
|
|
int reg;
|
|
|
|
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
|
|
|
|
snd_pcm_suspend_all(chip->pcm);
|
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; reg++)
|
|
chip->saved_regs_mixer[reg] = inw(chip->mixer_port + reg * 2);
|
|
|
|
/* make sure to disable master volume etc. to prevent looping sound */
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1);
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
|
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; reg++)
|
|
chip->saved_regs_codec[reg] = inw(chip->codec_port + reg * 2);
|
|
for (reg = 0; reg < AZF_IO_SIZE_IO2_PM / 2; reg++)
|
|
chip->saved_regs_io2[reg] = inw(chip->io2_port + reg * 2);
|
|
for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; reg++)
|
|
chip->saved_regs_mpu[reg] = inw(chip->mpu_port + reg * 2);
|
|
for (reg = 0; reg < AZF_IO_SIZE_SYNTH_PM / 2; reg++)
|
|
chip->saved_regs_synth[reg] = inw(chip->synth_port + reg * 2);
|
|
|
|
pci_disable_device(pci);
|
|
pci_save_state(pci);
|
|
pci_set_power_state(pci, pci_choose_state(pci, state));
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
snd_azf3328_resume(struct pci_dev *pci)
|
|
{
|
|
struct snd_card *card = pci_get_drvdata(pci);
|
|
struct snd_azf3328 *chip = card->private_data;
|
|
int reg;
|
|
|
|
pci_set_power_state(pci, PCI_D0);
|
|
pci_restore_state(pci);
|
|
if (pci_enable_device(pci) < 0) {
|
|
printk(KERN_ERR "azt3328: pci_enable_device failed, "
|
|
"disabling device\n");
|
|
snd_card_disconnect(card);
|
|
return -EIO;
|
|
}
|
|
pci_set_master(pci);
|
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_IO2_PM / 2; reg++)
|
|
outw(chip->saved_regs_io2[reg], chip->io2_port + reg * 2);
|
|
for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; reg++)
|
|
outw(chip->saved_regs_mpu[reg], chip->mpu_port + reg * 2);
|
|
for (reg = 0; reg < AZF_IO_SIZE_SYNTH_PM / 2; reg++)
|
|
outw(chip->saved_regs_synth[reg], chip->synth_port + reg * 2);
|
|
for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; reg++)
|
|
outw(chip->saved_regs_mixer[reg], chip->mixer_port + reg * 2);
|
|
for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; reg++)
|
|
outw(chip->saved_regs_codec[reg], chip->codec_port + reg * 2);
|
|
|
|
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "AZF3328",
|
|
.id_table = snd_azf3328_ids,
|
|
.probe = snd_azf3328_probe,
|
|
.remove = __devexit_p(snd_azf3328_remove),
|
|
#ifdef CONFIG_PM
|
|
.suspend = snd_azf3328_suspend,
|
|
.resume = snd_azf3328_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init
|
|
alsa_card_azf3328_init(void)
|
|
{
|
|
int err;
|
|
snd_azf3328_dbgcallenter();
|
|
err = pci_register_driver(&driver);
|
|
snd_azf3328_dbgcallleave();
|
|
return err;
|
|
}
|
|
|
|
static void __exit
|
|
alsa_card_azf3328_exit(void)
|
|
{
|
|
snd_azf3328_dbgcallenter();
|
|
pci_unregister_driver(&driver);
|
|
snd_azf3328_dbgcallleave();
|
|
}
|
|
|
|
module_init(alsa_card_azf3328_init)
|
|
module_exit(alsa_card_azf3328_exit)
|