mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 22:16:46 +07:00
4d776482ec
It is possible to stack multiple DSA switches in a way that they are not part of the tree (disjoint) but the DSA master of a switch is a DSA slave of another. When that happens switch drivers may have to know this is the case so as to determine whether their tagging protocol has a remove chance of working. This is useful for specific switch drivers such as b53 where devices have been known to be stacked in the wild without the Broadcom tag protocol supporting that feature. This allows b53 to continue supporting those devices by forcing the disabling of Broadcom tags on the outermost switches if necessary. The get_tag_protocol() function is therefore updated to gain an additional enum dsa_tag_protocol argument which denotes the current tagging protocol used by the DSA master we are attached to, else DSA_TAG_PROTO_NONE for the top of the dsa_switch_tree. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1168 lines
28 KiB
C
1168 lines
28 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
|
|
* Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2016 John Crispin <john@phrozen.org>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/netdevice.h>
|
|
#include <net/dsa.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/if_bridge.h>
|
|
#include <linux/mdio.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include "qca8k.h"
|
|
|
|
#define MIB_DESC(_s, _o, _n) \
|
|
{ \
|
|
.size = (_s), \
|
|
.offset = (_o), \
|
|
.name = (_n), \
|
|
}
|
|
|
|
static const struct qca8k_mib_desc ar8327_mib[] = {
|
|
MIB_DESC(1, 0x00, "RxBroad"),
|
|
MIB_DESC(1, 0x04, "RxPause"),
|
|
MIB_DESC(1, 0x08, "RxMulti"),
|
|
MIB_DESC(1, 0x0c, "RxFcsErr"),
|
|
MIB_DESC(1, 0x10, "RxAlignErr"),
|
|
MIB_DESC(1, 0x14, "RxRunt"),
|
|
MIB_DESC(1, 0x18, "RxFragment"),
|
|
MIB_DESC(1, 0x1c, "Rx64Byte"),
|
|
MIB_DESC(1, 0x20, "Rx128Byte"),
|
|
MIB_DESC(1, 0x24, "Rx256Byte"),
|
|
MIB_DESC(1, 0x28, "Rx512Byte"),
|
|
MIB_DESC(1, 0x2c, "Rx1024Byte"),
|
|
MIB_DESC(1, 0x30, "Rx1518Byte"),
|
|
MIB_DESC(1, 0x34, "RxMaxByte"),
|
|
MIB_DESC(1, 0x38, "RxTooLong"),
|
|
MIB_DESC(2, 0x3c, "RxGoodByte"),
|
|
MIB_DESC(2, 0x44, "RxBadByte"),
|
|
MIB_DESC(1, 0x4c, "RxOverFlow"),
|
|
MIB_DESC(1, 0x50, "Filtered"),
|
|
MIB_DESC(1, 0x54, "TxBroad"),
|
|
MIB_DESC(1, 0x58, "TxPause"),
|
|
MIB_DESC(1, 0x5c, "TxMulti"),
|
|
MIB_DESC(1, 0x60, "TxUnderRun"),
|
|
MIB_DESC(1, 0x64, "Tx64Byte"),
|
|
MIB_DESC(1, 0x68, "Tx128Byte"),
|
|
MIB_DESC(1, 0x6c, "Tx256Byte"),
|
|
MIB_DESC(1, 0x70, "Tx512Byte"),
|
|
MIB_DESC(1, 0x74, "Tx1024Byte"),
|
|
MIB_DESC(1, 0x78, "Tx1518Byte"),
|
|
MIB_DESC(1, 0x7c, "TxMaxByte"),
|
|
MIB_DESC(1, 0x80, "TxOverSize"),
|
|
MIB_DESC(2, 0x84, "TxByte"),
|
|
MIB_DESC(1, 0x8c, "TxCollision"),
|
|
MIB_DESC(1, 0x90, "TxAbortCol"),
|
|
MIB_DESC(1, 0x94, "TxMultiCol"),
|
|
MIB_DESC(1, 0x98, "TxSingleCol"),
|
|
MIB_DESC(1, 0x9c, "TxExcDefer"),
|
|
MIB_DESC(1, 0xa0, "TxDefer"),
|
|
MIB_DESC(1, 0xa4, "TxLateCol"),
|
|
};
|
|
|
|
/* The 32bit switch registers are accessed indirectly. To achieve this we need
|
|
* to set the page of the register. Track the last page that was set to reduce
|
|
* mdio writes
|
|
*/
|
|
static u16 qca8k_current_page = 0xffff;
|
|
|
|
static void
|
|
qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
|
|
{
|
|
regaddr >>= 1;
|
|
*r1 = regaddr & 0x1e;
|
|
|
|
regaddr >>= 5;
|
|
*r2 = regaddr & 0x7;
|
|
|
|
regaddr >>= 3;
|
|
*page = regaddr & 0x3ff;
|
|
}
|
|
|
|
static u32
|
|
qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = bus->read(bus, phy_id, regnum);
|
|
if (ret >= 0) {
|
|
val = ret;
|
|
ret = bus->read(bus, phy_id, regnum + 1);
|
|
val |= ret << 16;
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_err_ratelimited(&bus->dev,
|
|
"failed to read qca8k 32bit register\n");
|
|
return ret;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static void
|
|
qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
|
|
{
|
|
u16 lo, hi;
|
|
int ret;
|
|
|
|
lo = val & 0xffff;
|
|
hi = (u16)(val >> 16);
|
|
|
|
ret = bus->write(bus, phy_id, regnum, lo);
|
|
if (ret >= 0)
|
|
ret = bus->write(bus, phy_id, regnum + 1, hi);
|
|
if (ret < 0)
|
|
dev_err_ratelimited(&bus->dev,
|
|
"failed to write qca8k 32bit register\n");
|
|
}
|
|
|
|
static void
|
|
qca8k_set_page(struct mii_bus *bus, u16 page)
|
|
{
|
|
if (page == qca8k_current_page)
|
|
return;
|
|
|
|
if (bus->write(bus, 0x18, 0, page) < 0)
|
|
dev_err_ratelimited(&bus->dev,
|
|
"failed to set qca8k page\n");
|
|
qca8k_current_page = page;
|
|
}
|
|
|
|
static u32
|
|
qca8k_read(struct qca8k_priv *priv, u32 reg)
|
|
{
|
|
u16 r1, r2, page;
|
|
u32 val;
|
|
|
|
qca8k_split_addr(reg, &r1, &r2, &page);
|
|
|
|
mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
qca8k_set_page(priv->bus, page);
|
|
val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
|
|
|
|
mutex_unlock(&priv->bus->mdio_lock);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void
|
|
qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
|
|
{
|
|
u16 r1, r2, page;
|
|
|
|
qca8k_split_addr(reg, &r1, &r2, &page);
|
|
|
|
mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
qca8k_set_page(priv->bus, page);
|
|
qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
|
|
|
|
mutex_unlock(&priv->bus->mdio_lock);
|
|
}
|
|
|
|
static u32
|
|
qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 val)
|
|
{
|
|
u16 r1, r2, page;
|
|
u32 ret;
|
|
|
|
qca8k_split_addr(reg, &r1, &r2, &page);
|
|
|
|
mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
qca8k_set_page(priv->bus, page);
|
|
ret = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
|
|
ret &= ~mask;
|
|
ret |= val;
|
|
qca8k_mii_write32(priv->bus, 0x10 | r2, r1, ret);
|
|
|
|
mutex_unlock(&priv->bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val)
|
|
{
|
|
qca8k_rmw(priv, reg, 0, val);
|
|
}
|
|
|
|
static void
|
|
qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val)
|
|
{
|
|
qca8k_rmw(priv, reg, val, 0);
|
|
}
|
|
|
|
static int
|
|
qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
|
|
|
|
*val = qca8k_read(priv, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
|
|
|
|
qca8k_write(priv, reg, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_range qca8k_readable_ranges[] = {
|
|
regmap_reg_range(0x0000, 0x00e4), /* Global control */
|
|
regmap_reg_range(0x0100, 0x0168), /* EEE control */
|
|
regmap_reg_range(0x0200, 0x0270), /* Parser control */
|
|
regmap_reg_range(0x0400, 0x0454), /* ACL */
|
|
regmap_reg_range(0x0600, 0x0718), /* Lookup */
|
|
regmap_reg_range(0x0800, 0x0b70), /* QM */
|
|
regmap_reg_range(0x0c00, 0x0c80), /* PKT */
|
|
regmap_reg_range(0x0e00, 0x0e98), /* L3 */
|
|
regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
|
|
regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
|
|
regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
|
|
regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
|
|
regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
|
|
regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
|
|
regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
|
|
|
|
};
|
|
|
|
static const struct regmap_access_table qca8k_readable_table = {
|
|
.yes_ranges = qca8k_readable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges),
|
|
};
|
|
|
|
static struct regmap_config qca8k_regmap_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = 0x16ac, /* end MIB - Port6 range */
|
|
.reg_read = qca8k_regmap_read,
|
|
.reg_write = qca8k_regmap_write,
|
|
.rd_table = &qca8k_readable_table,
|
|
};
|
|
|
|
static int
|
|
qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(20);
|
|
|
|
/* loop until the busy flag has cleared */
|
|
do {
|
|
u32 val = qca8k_read(priv, reg);
|
|
int busy = val & mask;
|
|
|
|
if (!busy)
|
|
break;
|
|
cond_resched();
|
|
} while (!time_after_eq(jiffies, timeout));
|
|
|
|
return time_after_eq(jiffies, timeout);
|
|
}
|
|
|
|
static void
|
|
qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
|
|
{
|
|
u32 reg[4];
|
|
int i;
|
|
|
|
/* load the ARL table into an array */
|
|
for (i = 0; i < 4; i++)
|
|
reg[i] = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4));
|
|
|
|
/* vid - 83:72 */
|
|
fdb->vid = (reg[2] >> QCA8K_ATU_VID_S) & QCA8K_ATU_VID_M;
|
|
/* aging - 67:64 */
|
|
fdb->aging = reg[2] & QCA8K_ATU_STATUS_M;
|
|
/* portmask - 54:48 */
|
|
fdb->port_mask = (reg[1] >> QCA8K_ATU_PORT_S) & QCA8K_ATU_PORT_M;
|
|
/* mac - 47:0 */
|
|
fdb->mac[0] = (reg[1] >> QCA8K_ATU_ADDR0_S) & 0xff;
|
|
fdb->mac[1] = reg[1] & 0xff;
|
|
fdb->mac[2] = (reg[0] >> QCA8K_ATU_ADDR2_S) & 0xff;
|
|
fdb->mac[3] = (reg[0] >> QCA8K_ATU_ADDR3_S) & 0xff;
|
|
fdb->mac[4] = (reg[0] >> QCA8K_ATU_ADDR4_S) & 0xff;
|
|
fdb->mac[5] = reg[0] & 0xff;
|
|
}
|
|
|
|
static void
|
|
qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac,
|
|
u8 aging)
|
|
{
|
|
u32 reg[3] = { 0 };
|
|
int i;
|
|
|
|
/* vid - 83:72 */
|
|
reg[2] = (vid & QCA8K_ATU_VID_M) << QCA8K_ATU_VID_S;
|
|
/* aging - 67:64 */
|
|
reg[2] |= aging & QCA8K_ATU_STATUS_M;
|
|
/* portmask - 54:48 */
|
|
reg[1] = (port_mask & QCA8K_ATU_PORT_M) << QCA8K_ATU_PORT_S;
|
|
/* mac - 47:0 */
|
|
reg[1] |= mac[0] << QCA8K_ATU_ADDR0_S;
|
|
reg[1] |= mac[1];
|
|
reg[0] |= mac[2] << QCA8K_ATU_ADDR2_S;
|
|
reg[0] |= mac[3] << QCA8K_ATU_ADDR3_S;
|
|
reg[0] |= mac[4] << QCA8K_ATU_ADDR4_S;
|
|
reg[0] |= mac[5];
|
|
|
|
/* load the array into the ARL table */
|
|
for (i = 0; i < 3; i++)
|
|
qca8k_write(priv, QCA8K_REG_ATU_DATA0 + (i * 4), reg[i]);
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Set the command and FDB index */
|
|
reg = QCA8K_ATU_FUNC_BUSY;
|
|
reg |= cmd;
|
|
if (port >= 0) {
|
|
reg |= QCA8K_ATU_FUNC_PORT_EN;
|
|
reg |= (port & QCA8K_ATU_FUNC_PORT_M) << QCA8K_ATU_FUNC_PORT_S;
|
|
}
|
|
|
|
/* Write the function register triggering the table access */
|
|
qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
|
|
|
|
/* wait for completion */
|
|
if (qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY))
|
|
return -1;
|
|
|
|
/* Check for table full violation when adding an entry */
|
|
if (cmd == QCA8K_FDB_LOAD) {
|
|
reg = qca8k_read(priv, QCA8K_REG_ATU_FUNC);
|
|
if (reg & QCA8K_ATU_FUNC_FULL)
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_next(struct qca8k_priv *priv, struct qca8k_fdb *fdb, int port)
|
|
{
|
|
int ret;
|
|
|
|
qca8k_fdb_write(priv, fdb->vid, fdb->port_mask, fdb->mac, fdb->aging);
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_NEXT, port);
|
|
if (ret >= 0)
|
|
qca8k_fdb_read(priv, fdb);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_add(struct qca8k_priv *priv, const u8 *mac, u16 port_mask,
|
|
u16 vid, u8 aging)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
qca8k_fdb_write(priv, vid, port_mask, mac, aging);
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_del(struct qca8k_priv *priv, const u8 *mac, u16 port_mask, u16 vid)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
qca8k_fdb_write(priv, vid, port_mask, mac, 0);
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
qca8k_fdb_flush(struct qca8k_priv *priv)
|
|
{
|
|
mutex_lock(&priv->reg_mutex);
|
|
qca8k_fdb_access(priv, QCA8K_FDB_FLUSH, -1);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
static void
|
|
qca8k_mib_init(struct qca8k_priv *priv)
|
|
{
|
|
mutex_lock(&priv->reg_mutex);
|
|
qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
|
|
qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
|
|
qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
|
|
qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
static int
|
|
qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
|
|
{
|
|
u32 reg, val;
|
|
|
|
switch (port) {
|
|
case 0:
|
|
reg = QCA8K_REG_PORT0_PAD_CTRL;
|
|
break;
|
|
case 6:
|
|
reg = QCA8K_REG_PORT6_PAD_CTRL;
|
|
break;
|
|
default:
|
|
pr_err("Can't set PAD_CTRL on port %d\n", port);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Configure a port to be directly connected to an external
|
|
* PHY or MAC.
|
|
*/
|
|
switch (mode) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
/* RGMII mode means no delay so don't enable the delay */
|
|
val = QCA8K_PORT_PAD_RGMII_EN;
|
|
qca8k_write(priv, reg, val);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
/* RGMII_ID needs internal delay. This is enabled through
|
|
* PORT5_PAD_CTRL for all ports, rather than individual port
|
|
* registers
|
|
*/
|
|
qca8k_write(priv, reg,
|
|
QCA8K_PORT_PAD_RGMII_EN |
|
|
QCA8K_PORT_PAD_RGMII_TX_DELAY(QCA8K_MAX_DELAY) |
|
|
QCA8K_PORT_PAD_RGMII_RX_DELAY(QCA8K_MAX_DELAY));
|
|
qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
|
|
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
|
|
break;
|
|
default:
|
|
pr_err("xMII mode %d not supported\n", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
|
|
{
|
|
u32 mask = QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
|
|
|
|
/* Port 0 and 6 have no internal PHY */
|
|
if (port > 0 && port < 6)
|
|
mask |= QCA8K_PORT_STATUS_LINK_AUTO;
|
|
|
|
if (enable)
|
|
qca8k_reg_set(priv, QCA8K_REG_PORT_STATUS(port), mask);
|
|
else
|
|
qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask);
|
|
}
|
|
|
|
static u32
|
|
qca8k_port_to_phy(int port)
|
|
{
|
|
/* From Andrew Lunn:
|
|
* Port 0 has no internal phy.
|
|
* Port 1 has an internal PHY at MDIO address 0.
|
|
* Port 2 has an internal PHY at MDIO address 1.
|
|
* ...
|
|
* Port 5 has an internal PHY at MDIO address 4.
|
|
* Port 6 has no internal PHY.
|
|
*/
|
|
|
|
return port - 1;
|
|
}
|
|
|
|
static int
|
|
qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
|
|
{
|
|
u32 phy, val;
|
|
|
|
if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
|
|
return -EINVAL;
|
|
|
|
/* callee is responsible for not passing bad ports,
|
|
* but we still would like to make spills impossible.
|
|
*/
|
|
phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
|
|
val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
|
|
QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
|
|
QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
|
|
QCA8K_MDIO_MASTER_DATA(data);
|
|
|
|
qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
|
|
|
|
return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
|
|
QCA8K_MDIO_MASTER_BUSY);
|
|
}
|
|
|
|
static int
|
|
qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
|
|
{
|
|
u32 phy, val;
|
|
|
|
if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
|
|
return -EINVAL;
|
|
|
|
/* callee is responsible for not passing bad ports,
|
|
* but we still would like to make spills impossible.
|
|
*/
|
|
phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
|
|
val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
|
|
QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
|
|
QCA8K_MDIO_MASTER_REG_ADDR(regnum);
|
|
|
|
qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
|
|
|
|
if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
|
|
QCA8K_MDIO_MASTER_BUSY))
|
|
return -ETIMEDOUT;
|
|
|
|
val = (qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL) &
|
|
QCA8K_MDIO_MASTER_DATA_MASK);
|
|
|
|
return val;
|
|
}
|
|
|
|
static int
|
|
qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
|
|
return qca8k_mdio_write(priv, port, regnum, data);
|
|
}
|
|
|
|
static int
|
|
qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
int ret;
|
|
|
|
ret = qca8k_mdio_read(priv, port, regnum);
|
|
|
|
if (ret < 0)
|
|
return 0xffff;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_setup_mdio_bus(struct qca8k_priv *priv)
|
|
{
|
|
u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
|
|
struct device_node *ports, *port;
|
|
int err;
|
|
|
|
ports = of_get_child_by_name(priv->dev->of_node, "ports");
|
|
if (!ports)
|
|
return -EINVAL;
|
|
|
|
for_each_available_child_of_node(ports, port) {
|
|
err = of_property_read_u32(port, "reg", ®);
|
|
if (err) {
|
|
of_node_put(port);
|
|
of_node_put(ports);
|
|
return err;
|
|
}
|
|
|
|
if (!dsa_is_user_port(priv->ds, reg))
|
|
continue;
|
|
|
|
if (of_property_read_bool(port, "phy-handle"))
|
|
external_mdio_mask |= BIT(reg);
|
|
else
|
|
internal_mdio_mask |= BIT(reg);
|
|
}
|
|
|
|
of_node_put(ports);
|
|
if (!external_mdio_mask && !internal_mdio_mask) {
|
|
dev_err(priv->dev, "no PHYs are defined.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
|
|
* the MDIO_MASTER register also _disconnects_ the external MDC
|
|
* passthrough to the internal PHYs. It's not possible to use both
|
|
* configurations at the same time!
|
|
*
|
|
* Because this came up during the review process:
|
|
* If the external mdio-bus driver is capable magically disabling
|
|
* the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
|
|
* accessors for the time being, it would be possible to pull this
|
|
* off.
|
|
*/
|
|
if (!!external_mdio_mask && !!internal_mdio_mask) {
|
|
dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (external_mdio_mask) {
|
|
/* Make sure to disable the internal mdio bus in cases
|
|
* a dt-overlay and driver reload changed the configuration
|
|
*/
|
|
|
|
qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
|
|
QCA8K_MDIO_MASTER_EN);
|
|
return 0;
|
|
}
|
|
|
|
priv->ops.phy_read = qca8k_phy_read;
|
|
priv->ops.phy_write = qca8k_phy_write;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_setup(struct dsa_switch *ds)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
phy_interface_t phy_mode = PHY_INTERFACE_MODE_NA;
|
|
int ret, i;
|
|
u32 mask;
|
|
|
|
/* Make sure that port 0 is the cpu port */
|
|
if (!dsa_is_cpu_port(ds, 0)) {
|
|
pr_err("port 0 is not the CPU port\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_init(&priv->reg_mutex);
|
|
|
|
/* Start by setting up the register mapping */
|
|
priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
|
|
&qca8k_regmap_config);
|
|
if (IS_ERR(priv->regmap))
|
|
pr_warn("regmap initialization failed");
|
|
|
|
ret = qca8k_setup_mdio_bus(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Initialize CPU port pad mode (xMII type, delays...) */
|
|
ret = of_get_phy_mode(dsa_to_port(ds, QCA8K_CPU_PORT)->dn, &phy_mode);
|
|
if (ret) {
|
|
pr_err("Can't find phy-mode for master device\n");
|
|
return ret;
|
|
}
|
|
ret = qca8k_set_pad_ctrl(priv, QCA8K_CPU_PORT, phy_mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Enable CPU Port, force it to maximum bandwidth and full-duplex */
|
|
mask = QCA8K_PORT_STATUS_SPEED_1000 | QCA8K_PORT_STATUS_TXFLOW |
|
|
QCA8K_PORT_STATUS_RXFLOW | QCA8K_PORT_STATUS_DUPLEX;
|
|
qca8k_write(priv, QCA8K_REG_PORT_STATUS(QCA8K_CPU_PORT), mask);
|
|
qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
|
|
QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
|
|
qca8k_port_set_status(priv, QCA8K_CPU_PORT, 1);
|
|
priv->port_sts[QCA8K_CPU_PORT].enabled = 1;
|
|
|
|
/* Enable MIB counters */
|
|
qca8k_mib_init(priv);
|
|
|
|
/* Enable QCA header mode on the cpu port */
|
|
qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
|
|
QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
|
|
QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
|
|
|
|
/* Disable forwarding by default on all ports */
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++)
|
|
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
|
|
QCA8K_PORT_LOOKUP_MEMBER, 0);
|
|
|
|
/* Disable MAC by default on all user ports */
|
|
for (i = 1; i < QCA8K_NUM_PORTS; i++)
|
|
if (dsa_is_user_port(ds, i))
|
|
qca8k_port_set_status(priv, i, 0);
|
|
|
|
/* Forward all unknown frames to CPU port for Linux processing */
|
|
qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
|
|
BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
|
|
BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
|
|
BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
|
|
BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
|
|
|
|
/* Setup connection between CPU port & user ports */
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
|
|
/* CPU port gets connected to all user ports of the switch */
|
|
if (dsa_is_cpu_port(ds, i)) {
|
|
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
|
|
QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
|
|
}
|
|
|
|
/* Invividual user ports get connected to CPU port only */
|
|
if (dsa_is_user_port(ds, i)) {
|
|
int shift = 16 * (i % 2);
|
|
|
|
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
|
|
QCA8K_PORT_LOOKUP_MEMBER,
|
|
BIT(QCA8K_CPU_PORT));
|
|
|
|
/* Enable ARP Auto-learning by default */
|
|
qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
|
|
QCA8K_PORT_LOOKUP_LEARN);
|
|
|
|
/* For port based vlans to work we need to set the
|
|
* default egress vid
|
|
*/
|
|
qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
|
|
0xffff << shift, 1 << shift);
|
|
qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
|
|
QCA8K_PORT_VLAN_CVID(1) |
|
|
QCA8K_PORT_VLAN_SVID(1));
|
|
}
|
|
}
|
|
|
|
/* Flush the FDB table */
|
|
qca8k_fdb_flush(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_adjust_link(struct dsa_switch *ds, int port, struct phy_device *phy)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
u32 reg;
|
|
|
|
/* Force fixed-link setting for CPU port, skip others. */
|
|
if (!phy_is_pseudo_fixed_link(phy))
|
|
return;
|
|
|
|
/* Set port speed */
|
|
switch (phy->speed) {
|
|
case 10:
|
|
reg = QCA8K_PORT_STATUS_SPEED_10;
|
|
break;
|
|
case 100:
|
|
reg = QCA8K_PORT_STATUS_SPEED_100;
|
|
break;
|
|
case 1000:
|
|
reg = QCA8K_PORT_STATUS_SPEED_1000;
|
|
break;
|
|
default:
|
|
dev_dbg(priv->dev, "port%d link speed %dMbps not supported.\n",
|
|
port, phy->speed);
|
|
return;
|
|
}
|
|
|
|
/* Set duplex mode */
|
|
if (phy->duplex == DUPLEX_FULL)
|
|
reg |= QCA8K_PORT_STATUS_DUPLEX;
|
|
|
|
/* Force flow control */
|
|
if (dsa_is_cpu_port(ds, port))
|
|
reg |= QCA8K_PORT_STATUS_RXFLOW | QCA8K_PORT_STATUS_TXFLOW;
|
|
|
|
/* Force link down before changing MAC options */
|
|
qca8k_port_set_status(priv, port, 0);
|
|
qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg);
|
|
qca8k_port_set_status(priv, port, 1);
|
|
}
|
|
|
|
static void
|
|
qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data)
|
|
{
|
|
int i;
|
|
|
|
if (stringset != ETH_SS_STATS)
|
|
return;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++)
|
|
strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
|
|
ETH_GSTRING_LEN);
|
|
}
|
|
|
|
static void
|
|
qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
|
|
uint64_t *data)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
const struct qca8k_mib_desc *mib;
|
|
u32 reg, i;
|
|
u64 hi;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
|
|
mib = &ar8327_mib[i];
|
|
reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset;
|
|
|
|
data[i] = qca8k_read(priv, reg);
|
|
if (mib->size == 2) {
|
|
hi = qca8k_read(priv, reg + 4);
|
|
data[i] |= hi << 32;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset)
|
|
{
|
|
if (sset != ETH_SS_STATS)
|
|
return 0;
|
|
|
|
return ARRAY_SIZE(ar8327_mib);
|
|
}
|
|
|
|
static int
|
|
qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
|
|
u32 reg;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL);
|
|
if (eee->eee_enabled)
|
|
reg |= lpi_en;
|
|
else
|
|
reg &= ~lpi_en;
|
|
qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
|
|
{
|
|
/* Nothing to do on the port's MAC */
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
u32 stp_state;
|
|
|
|
switch (state) {
|
|
case BR_STATE_DISABLED:
|
|
stp_state = QCA8K_PORT_LOOKUP_STATE_DISABLED;
|
|
break;
|
|
case BR_STATE_BLOCKING:
|
|
stp_state = QCA8K_PORT_LOOKUP_STATE_BLOCKING;
|
|
break;
|
|
case BR_STATE_LISTENING:
|
|
stp_state = QCA8K_PORT_LOOKUP_STATE_LISTENING;
|
|
break;
|
|
case BR_STATE_LEARNING:
|
|
stp_state = QCA8K_PORT_LOOKUP_STATE_LEARNING;
|
|
break;
|
|
case BR_STATE_FORWARDING:
|
|
default:
|
|
stp_state = QCA8K_PORT_LOOKUP_STATE_FORWARD;
|
|
break;
|
|
}
|
|
|
|
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
|
|
QCA8K_PORT_LOOKUP_STATE_MASK, stp_state);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
int port_mask = BIT(QCA8K_CPU_PORT);
|
|
int i;
|
|
|
|
for (i = 1; i < QCA8K_NUM_PORTS; i++) {
|
|
if (dsa_to_port(ds, i)->bridge_dev != br)
|
|
continue;
|
|
/* Add this port to the portvlan mask of the other ports
|
|
* in the bridge
|
|
*/
|
|
qca8k_reg_set(priv,
|
|
QCA8K_PORT_LOOKUP_CTRL(i),
|
|
BIT(port));
|
|
if (i != port)
|
|
port_mask |= BIT(i);
|
|
}
|
|
/* Add all other ports to this ports portvlan mask */
|
|
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
|
|
QCA8K_PORT_LOOKUP_MEMBER, port_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
int i;
|
|
|
|
for (i = 1; i < QCA8K_NUM_PORTS; i++) {
|
|
if (dsa_to_port(ds, i)->bridge_dev != br)
|
|
continue;
|
|
/* Remove this port to the portvlan mask of the other ports
|
|
* in the bridge
|
|
*/
|
|
qca8k_reg_clear(priv,
|
|
QCA8K_PORT_LOOKUP_CTRL(i),
|
|
BIT(port));
|
|
}
|
|
|
|
/* Set the cpu port to be the only one in the portvlan mask of
|
|
* this port
|
|
*/
|
|
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
|
|
QCA8K_PORT_LOOKUP_MEMBER, BIT(QCA8K_CPU_PORT));
|
|
}
|
|
|
|
static int
|
|
qca8k_port_enable(struct dsa_switch *ds, int port,
|
|
struct phy_device *phy)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
|
|
if (!dsa_is_user_port(ds, port))
|
|
return 0;
|
|
|
|
qca8k_port_set_status(priv, port, 1);
|
|
priv->port_sts[port].enabled = 1;
|
|
|
|
phy_support_asym_pause(phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_port_disable(struct dsa_switch *ds, int port)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
|
|
qca8k_port_set_status(priv, port, 0);
|
|
priv->port_sts[port].enabled = 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
|
|
u16 port_mask, u16 vid)
|
|
{
|
|
/* Set the vid to the port vlan id if no vid is set */
|
|
if (!vid)
|
|
vid = 1;
|
|
|
|
return qca8k_fdb_add(priv, addr, port_mask, vid,
|
|
QCA8K_ATU_STATUS_STATIC);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_fdb_add(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
u16 port_mask = BIT(port);
|
|
|
|
return qca8k_port_fdb_insert(priv, addr, port_mask, vid);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_fdb_del(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
u16 port_mask = BIT(port);
|
|
|
|
if (!vid)
|
|
vid = 1;
|
|
|
|
return qca8k_fdb_del(priv, addr, port_mask, vid);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
|
|
dsa_fdb_dump_cb_t *cb, void *data)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
struct qca8k_fdb _fdb = { 0 };
|
|
int cnt = QCA8K_NUM_FDB_RECORDS;
|
|
bool is_static;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
while (cnt-- && !qca8k_fdb_next(priv, &_fdb, port)) {
|
|
if (!_fdb.aging)
|
|
break;
|
|
is_static = (_fdb.aging == QCA8K_ATU_STATUS_STATIC);
|
|
ret = cb(_fdb.mac, _fdb.vid, is_static, data);
|
|
if (ret)
|
|
break;
|
|
}
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum dsa_tag_protocol
|
|
qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
|
|
enum dsa_tag_protocol mp)
|
|
{
|
|
return DSA_TAG_PROTO_QCA;
|
|
}
|
|
|
|
static const struct dsa_switch_ops qca8k_switch_ops = {
|
|
.get_tag_protocol = qca8k_get_tag_protocol,
|
|
.setup = qca8k_setup,
|
|
.adjust_link = qca8k_adjust_link,
|
|
.get_strings = qca8k_get_strings,
|
|
.get_ethtool_stats = qca8k_get_ethtool_stats,
|
|
.get_sset_count = qca8k_get_sset_count,
|
|
.get_mac_eee = qca8k_get_mac_eee,
|
|
.set_mac_eee = qca8k_set_mac_eee,
|
|
.port_enable = qca8k_port_enable,
|
|
.port_disable = qca8k_port_disable,
|
|
.port_stp_state_set = qca8k_port_stp_state_set,
|
|
.port_bridge_join = qca8k_port_bridge_join,
|
|
.port_bridge_leave = qca8k_port_bridge_leave,
|
|
.port_fdb_add = qca8k_port_fdb_add,
|
|
.port_fdb_del = qca8k_port_fdb_del,
|
|
.port_fdb_dump = qca8k_port_fdb_dump,
|
|
};
|
|
|
|
static int
|
|
qca8k_sw_probe(struct mdio_device *mdiodev)
|
|
{
|
|
struct qca8k_priv *priv;
|
|
u32 id;
|
|
|
|
/* allocate the private data struct so that we can probe the switches
|
|
* ID register
|
|
*/
|
|
priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->bus = mdiodev->bus;
|
|
priv->dev = &mdiodev->dev;
|
|
|
|
priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
|
|
GPIOD_ASIS);
|
|
if (IS_ERR(priv->reset_gpio))
|
|
return PTR_ERR(priv->reset_gpio);
|
|
|
|
if (priv->reset_gpio) {
|
|
gpiod_set_value_cansleep(priv->reset_gpio, 1);
|
|
/* The active low duration must be greater than 10 ms
|
|
* and checkpatch.pl wants 20 ms.
|
|
*/
|
|
msleep(20);
|
|
gpiod_set_value_cansleep(priv->reset_gpio, 0);
|
|
}
|
|
|
|
/* read the switches ID register */
|
|
id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
|
|
id >>= QCA8K_MASK_CTRL_ID_S;
|
|
id &= QCA8K_MASK_CTRL_ID_M;
|
|
if (id != QCA8K_ID_QCA8337)
|
|
return -ENODEV;
|
|
|
|
priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds),
|
|
QCA8K_NUM_PORTS);
|
|
if (!priv->ds)
|
|
return -ENOMEM;
|
|
|
|
priv->ds->dev = &mdiodev->dev;
|
|
priv->ds->num_ports = QCA8K_NUM_PORTS;
|
|
priv->ds->priv = priv;
|
|
priv->ops = qca8k_switch_ops;
|
|
priv->ds->ops = &priv->ops;
|
|
mutex_init(&priv->reg_mutex);
|
|
dev_set_drvdata(&mdiodev->dev, priv);
|
|
|
|
return dsa_register_switch(priv->ds);
|
|
}
|
|
|
|
static void
|
|
qca8k_sw_remove(struct mdio_device *mdiodev)
|
|
{
|
|
struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
|
|
int i;
|
|
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++)
|
|
qca8k_port_set_status(priv, i, 0);
|
|
|
|
dsa_unregister_switch(priv->ds);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static void
|
|
qca8k_set_pm(struct qca8k_priv *priv, int enable)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
|
|
if (!priv->port_sts[i].enabled)
|
|
continue;
|
|
|
|
qca8k_port_set_status(priv, i, enable);
|
|
}
|
|
}
|
|
|
|
static int qca8k_suspend(struct device *dev)
|
|
{
|
|
struct qca8k_priv *priv = dev_get_drvdata(dev);
|
|
|
|
qca8k_set_pm(priv, 0);
|
|
|
|
return dsa_switch_suspend(priv->ds);
|
|
}
|
|
|
|
static int qca8k_resume(struct device *dev)
|
|
{
|
|
struct qca8k_priv *priv = dev_get_drvdata(dev);
|
|
|
|
qca8k_set_pm(priv, 1);
|
|
|
|
return dsa_switch_resume(priv->ds);
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
|
|
qca8k_suspend, qca8k_resume);
|
|
|
|
static const struct of_device_id qca8k_of_match[] = {
|
|
{ .compatible = "qca,qca8334" },
|
|
{ .compatible = "qca,qca8337" },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
static struct mdio_driver qca8kmdio_driver = {
|
|
.probe = qca8k_sw_probe,
|
|
.remove = qca8k_sw_remove,
|
|
.mdiodrv.driver = {
|
|
.name = "qca8k",
|
|
.of_match_table = qca8k_of_match,
|
|
.pm = &qca8k_pm_ops,
|
|
},
|
|
};
|
|
|
|
mdio_module_driver(qca8kmdio_driver);
|
|
|
|
MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@phrozen.org>");
|
|
MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:qca8k");
|