linux_dsm_epyc7002/drivers/net/ethernet/atheros/atlx/atlx.c
Patrick McHardy f646968f8f net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*
Rename the hardware VLAN acceleration features to include "CTAG" to indicate
that they only support CTAGs. Follow up patches will introduce 802.1ad
server provider tagging (STAGs) and require the distinction for hardware not
supporting acclerating both.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:45:26 -04:00

280 lines
7.9 KiB
C

/* atlx.c -- common functions for Attansic network drivers
*
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
* Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
* Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
* Copyright(c) 2007 Atheros Corporation. All rights reserved.
*
* Derived from Intel e1000 driver
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/* Including this file like a header is a temporary hack, I promise. -- CHS */
#ifndef ATLX_C
#define ATLX_C
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/etherdevice.h>
#include <linux/if.h>
#include <linux/netdevice.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/workqueue.h>
#include "atlx.h"
static s32 atlx_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data);
static u32 atlx_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr);
static void atlx_set_mac_addr(struct atl1_hw *hw);
static struct atlx_spi_flash_dev flash_table[] = {
/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SEC_ERS CHIP_ERS */
{"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62},
{"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60},
{"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7},
};
static int atlx_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
switch (cmd) {
case SIOCGMIIPHY:
case SIOCGMIIREG:
case SIOCSMIIREG:
return atlx_mii_ioctl(netdev, ifr, cmd);
default:
return -EOPNOTSUPP;
}
}
/**
* atlx_set_mac - Change the Ethernet Address of the NIC
* @netdev: network interface device structure
* @p: pointer to an address structure
*
* Returns 0 on success, negative on failure
*/
static int atlx_set_mac(struct net_device *netdev, void *p)
{
struct atlx_adapter *adapter = netdev_priv(netdev);
struct sockaddr *addr = p;
if (netif_running(netdev))
return -EBUSY;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
atlx_set_mac_addr(&adapter->hw);
return 0;
}
static void atlx_check_for_link(struct atlx_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
u16 phy_data = 0;
spin_lock(&adapter->lock);
adapter->phy_timer_pending = false;
atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
spin_unlock(&adapter->lock);
/* notify upper layer link down ASAP */
if (!(phy_data & BMSR_LSTATUS)) {
/* Link Down */
if (netif_carrier_ok(netdev)) {
/* old link state: Up */
dev_info(&adapter->pdev->dev, "%s link is down\n",
netdev->name);
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
}
}
schedule_work(&adapter->link_chg_task);
}
/**
* atlx_set_multi - Multicast and Promiscuous mode set
* @netdev: network interface device structure
*
* The set_multi entry point is called whenever the multicast address
* list or the network interface flags are updated. This routine is
* responsible for configuring the hardware for proper multicast,
* promiscuous mode, and all-multi behavior.
*/
static void atlx_set_multi(struct net_device *netdev)
{
struct atlx_adapter *adapter = netdev_priv(netdev);
struct atlx_hw *hw = &adapter->hw;
struct netdev_hw_addr *ha;
u32 rctl;
u32 hash_value;
/* Check for Promiscuous and All Multicast modes */
rctl = ioread32(hw->hw_addr + REG_MAC_CTRL);
if (netdev->flags & IFF_PROMISC)
rctl |= MAC_CTRL_PROMIS_EN;
else if (netdev->flags & IFF_ALLMULTI) {
rctl |= MAC_CTRL_MC_ALL_EN;
rctl &= ~MAC_CTRL_PROMIS_EN;
} else
rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL);
/* clear the old settings from the multicast hash table */
iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
/* compute mc addresses' hash value ,and put it into hash table */
netdev_for_each_mc_addr(ha, netdev) {
hash_value = atlx_hash_mc_addr(hw, ha->addr);
atlx_hash_set(hw, hash_value);
}
}
static inline void atlx_imr_set(struct atlx_adapter *adapter,
unsigned int imr)
{
iowrite32(imr, adapter->hw.hw_addr + REG_IMR);
ioread32(adapter->hw.hw_addr + REG_IMR);
}
/**
* atlx_irq_enable - Enable default interrupt generation settings
* @adapter: board private structure
*/
static void atlx_irq_enable(struct atlx_adapter *adapter)
{
atlx_imr_set(adapter, IMR_NORMAL_MASK);
adapter->int_enabled = true;
}
/**
* atlx_irq_disable - Mask off interrupt generation on the NIC
* @adapter: board private structure
*/
static void atlx_irq_disable(struct atlx_adapter *adapter)
{
adapter->int_enabled = false;
atlx_imr_set(adapter, 0);
synchronize_irq(adapter->pdev->irq);
}
static void atlx_clear_phy_int(struct atlx_adapter *adapter)
{
u16 phy_data;
unsigned long flags;
spin_lock_irqsave(&adapter->lock, flags);
atlx_read_phy_reg(&adapter->hw, 19, &phy_data);
spin_unlock_irqrestore(&adapter->lock, flags);
}
/**
* atlx_tx_timeout - Respond to a Tx Hang
* @netdev: network interface device structure
*/
static void atlx_tx_timeout(struct net_device *netdev)
{
struct atlx_adapter *adapter = netdev_priv(netdev);
/* Do the reset outside of interrupt context */
schedule_work(&adapter->reset_dev_task);
}
/*
* atlx_link_chg_task - deal with link change event Out of interrupt context
*/
static void atlx_link_chg_task(struct work_struct *work)
{
struct atlx_adapter *adapter;
unsigned long flags;
adapter = container_of(work, struct atlx_adapter, link_chg_task);
spin_lock_irqsave(&adapter->lock, flags);
atlx_check_link(adapter);
spin_unlock_irqrestore(&adapter->lock, flags);
}
static void __atlx_vlan_mode(netdev_features_t features, u32 *ctrl)
{
if (features & NETIF_F_HW_VLAN_CTAG_RX) {
/* enable VLAN tag insert/strip */
*ctrl |= MAC_CTRL_RMV_VLAN;
} else {
/* disable VLAN tag insert/strip */
*ctrl &= ~MAC_CTRL_RMV_VLAN;
}
}
static void atlx_vlan_mode(struct net_device *netdev,
netdev_features_t features)
{
struct atlx_adapter *adapter = netdev_priv(netdev);
unsigned long flags;
u32 ctrl;
spin_lock_irqsave(&adapter->lock, flags);
/* atlx_irq_disable(adapter); FIXME: confirm/remove */
ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
__atlx_vlan_mode(features, &ctrl);
iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
/* atlx_irq_enable(adapter); FIXME */
spin_unlock_irqrestore(&adapter->lock, flags);
}
static void atlx_restore_vlan(struct atlx_adapter *adapter)
{
atlx_vlan_mode(adapter->netdev, adapter->netdev->features);
}
static netdev_features_t atlx_fix_features(struct net_device *netdev,
netdev_features_t features)
{
/*
* Since there is no support for separate rx/tx vlan accel
* enable/disable make sure tx flag is always in same state as rx.
*/
if (features & NETIF_F_HW_VLAN_CTAG_RX)
features |= NETIF_F_HW_VLAN_CTAG_TX;
else
features &= ~NETIF_F_HW_VLAN_CTAG_TX;
return features;
}
static int atlx_set_features(struct net_device *netdev,
netdev_features_t features)
{
netdev_features_t changed = netdev->features ^ features;
if (changed & NETIF_F_HW_VLAN_CTAG_RX)
atlx_vlan_mode(netdev, features);
return 0;
}
#endif /* ATLX_C */