mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 05:16:43 +07:00
f1ca2167d8
Instead of hardcoding the used in/out endpoints we should detect them by walking through all available endpoints. rt2800usb will gain the most out of this, because the legacy drivers indicate that there are multiple endpoints available. However this code might benefit at least rt73usb as well for the MIMO queues, and if we are really lucky rt2500usb will benefit because for the TX and PRIO queues. Even if rt2500usb and rt73usb do not get better performance after this patch, the endpoint detection still belongs to rt2x00usb, and it shouldn't hurt to always try to detect the available endpoints. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2375 lines
72 KiB
C
2375 lines
72 KiB
C
/*
|
|
Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
|
|
<http://rt2x00.serialmonkey.com>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the
|
|
Free Software Foundation, Inc.,
|
|
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
/*
|
|
Module: rt73usb
|
|
Abstract: rt73usb device specific routines.
|
|
Supported chipsets: rt2571W & rt2671.
|
|
*/
|
|
|
|
#include <linux/crc-itu-t.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include "rt2x00.h"
|
|
#include "rt2x00usb.h"
|
|
#include "rt73usb.h"
|
|
|
|
/*
|
|
* Allow hardware encryption to be disabled.
|
|
*/
|
|
static int modparam_nohwcrypt = 0;
|
|
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
|
|
|
|
/*
|
|
* Register access.
|
|
* All access to the CSR registers will go through the methods
|
|
* rt2x00usb_register_read and rt2x00usb_register_write.
|
|
* BBP and RF register require indirect register access,
|
|
* and use the CSR registers BBPCSR and RFCSR to achieve this.
|
|
* These indirect registers work with busy bits,
|
|
* and we will try maximal REGISTER_BUSY_COUNT times to access
|
|
* the register while taking a REGISTER_BUSY_DELAY us delay
|
|
* between each attampt. When the busy bit is still set at that time,
|
|
* the access attempt is considered to have failed,
|
|
* and we will print an error.
|
|
* The _lock versions must be used if you already hold the csr_mutex
|
|
*/
|
|
#define WAIT_FOR_BBP(__dev, __reg) \
|
|
rt2x00usb_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg))
|
|
#define WAIT_FOR_RF(__dev, __reg) \
|
|
rt2x00usb_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg))
|
|
|
|
static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int word, const u8 value)
|
|
{
|
|
u32 reg;
|
|
|
|
mutex_lock(&rt2x00dev->csr_mutex);
|
|
|
|
/*
|
|
* Wait until the BBP becomes available, afterwards we
|
|
* can safely write the new data into the register.
|
|
*/
|
|
if (WAIT_FOR_BBP(rt2x00dev, ®)) {
|
|
reg = 0;
|
|
rt2x00_set_field32(®, PHY_CSR3_VALUE, value);
|
|
rt2x00_set_field32(®, PHY_CSR3_REGNUM, word);
|
|
rt2x00_set_field32(®, PHY_CSR3_BUSY, 1);
|
|
rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0);
|
|
|
|
rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
|
|
}
|
|
|
|
mutex_unlock(&rt2x00dev->csr_mutex);
|
|
}
|
|
|
|
static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int word, u8 *value)
|
|
{
|
|
u32 reg;
|
|
|
|
mutex_lock(&rt2x00dev->csr_mutex);
|
|
|
|
/*
|
|
* Wait until the BBP becomes available, afterwards we
|
|
* can safely write the read request into the register.
|
|
* After the data has been written, we wait until hardware
|
|
* returns the correct value, if at any time the register
|
|
* doesn't become available in time, reg will be 0xffffffff
|
|
* which means we return 0xff to the caller.
|
|
*/
|
|
if (WAIT_FOR_BBP(rt2x00dev, ®)) {
|
|
reg = 0;
|
|
rt2x00_set_field32(®, PHY_CSR3_REGNUM, word);
|
|
rt2x00_set_field32(®, PHY_CSR3_BUSY, 1);
|
|
rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1);
|
|
|
|
rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
|
|
|
|
WAIT_FOR_BBP(rt2x00dev, ®);
|
|
}
|
|
|
|
*value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
|
|
|
|
mutex_unlock(&rt2x00dev->csr_mutex);
|
|
}
|
|
|
|
static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int word, const u32 value)
|
|
{
|
|
u32 reg;
|
|
|
|
if (!word)
|
|
return;
|
|
|
|
mutex_lock(&rt2x00dev->csr_mutex);
|
|
|
|
/*
|
|
* Wait until the RF becomes available, afterwards we
|
|
* can safely write the new data into the register.
|
|
*/
|
|
if (WAIT_FOR_RF(rt2x00dev, ®)) {
|
|
reg = 0;
|
|
rt2x00_set_field32(®, PHY_CSR4_VALUE, value);
|
|
/*
|
|
* RF5225 and RF2527 contain 21 bits per RF register value,
|
|
* all others contain 20 bits.
|
|
*/
|
|
rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS,
|
|
20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
|
|
rt2x00_rf(&rt2x00dev->chip, RF2527)));
|
|
rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0);
|
|
rt2x00_set_field32(®, PHY_CSR4_BUSY, 1);
|
|
|
|
rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR4, reg);
|
|
rt2x00_rf_write(rt2x00dev, word, value);
|
|
}
|
|
|
|
mutex_unlock(&rt2x00dev->csr_mutex);
|
|
}
|
|
|
|
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
|
|
static const struct rt2x00debug rt73usb_rt2x00debug = {
|
|
.owner = THIS_MODULE,
|
|
.csr = {
|
|
.read = rt2x00usb_register_read,
|
|
.write = rt2x00usb_register_write,
|
|
.flags = RT2X00DEBUGFS_OFFSET,
|
|
.word_base = CSR_REG_BASE,
|
|
.word_size = sizeof(u32),
|
|
.word_count = CSR_REG_SIZE / sizeof(u32),
|
|
},
|
|
.eeprom = {
|
|
.read = rt2x00_eeprom_read,
|
|
.write = rt2x00_eeprom_write,
|
|
.word_base = EEPROM_BASE,
|
|
.word_size = sizeof(u16),
|
|
.word_count = EEPROM_SIZE / sizeof(u16),
|
|
},
|
|
.bbp = {
|
|
.read = rt73usb_bbp_read,
|
|
.write = rt73usb_bbp_write,
|
|
.word_base = BBP_BASE,
|
|
.word_size = sizeof(u8),
|
|
.word_count = BBP_SIZE / sizeof(u8),
|
|
},
|
|
.rf = {
|
|
.read = rt2x00_rf_read,
|
|
.write = rt73usb_rf_write,
|
|
.word_base = RF_BASE,
|
|
.word_size = sizeof(u32),
|
|
.word_count = RF_SIZE / sizeof(u32),
|
|
},
|
|
};
|
|
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
|
|
|
|
#ifdef CONFIG_RT2X00_LIB_LEDS
|
|
static void rt73usb_brightness_set(struct led_classdev *led_cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct rt2x00_led *led =
|
|
container_of(led_cdev, struct rt2x00_led, led_dev);
|
|
unsigned int enabled = brightness != LED_OFF;
|
|
unsigned int a_mode =
|
|
(enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
|
|
unsigned int bg_mode =
|
|
(enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
|
|
|
|
if (led->type == LED_TYPE_RADIO) {
|
|
rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
|
|
MCU_LEDCS_RADIO_STATUS, enabled);
|
|
|
|
rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
|
|
0, led->rt2x00dev->led_mcu_reg,
|
|
REGISTER_TIMEOUT);
|
|
} else if (led->type == LED_TYPE_ASSOC) {
|
|
rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
|
|
MCU_LEDCS_LINK_BG_STATUS, bg_mode);
|
|
rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
|
|
MCU_LEDCS_LINK_A_STATUS, a_mode);
|
|
|
|
rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
|
|
0, led->rt2x00dev->led_mcu_reg,
|
|
REGISTER_TIMEOUT);
|
|
} else if (led->type == LED_TYPE_QUALITY) {
|
|
/*
|
|
* The brightness is divided into 6 levels (0 - 5),
|
|
* this means we need to convert the brightness
|
|
* argument into the matching level within that range.
|
|
*/
|
|
rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
|
|
brightness / (LED_FULL / 6),
|
|
led->rt2x00dev->led_mcu_reg,
|
|
REGISTER_TIMEOUT);
|
|
}
|
|
}
|
|
|
|
static int rt73usb_blink_set(struct led_classdev *led_cdev,
|
|
unsigned long *delay_on,
|
|
unsigned long *delay_off)
|
|
{
|
|
struct rt2x00_led *led =
|
|
container_of(led_cdev, struct rt2x00_led, led_dev);
|
|
u32 reg;
|
|
|
|
rt2x00usb_register_read(led->rt2x00dev, MAC_CSR14, ®);
|
|
rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on);
|
|
rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off);
|
|
rt2x00usb_register_write(led->rt2x00dev, MAC_CSR14, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00_led *led,
|
|
enum led_type type)
|
|
{
|
|
led->rt2x00dev = rt2x00dev;
|
|
led->type = type;
|
|
led->led_dev.brightness_set = rt73usb_brightness_set;
|
|
led->led_dev.blink_set = rt73usb_blink_set;
|
|
led->flags = LED_INITIALIZED;
|
|
}
|
|
#endif /* CONFIG_RT2X00_LIB_LEDS */
|
|
|
|
/*
|
|
* Configuration handlers.
|
|
*/
|
|
static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_crypto *crypto,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct hw_key_entry key_entry;
|
|
struct rt2x00_field32 field;
|
|
int timeout;
|
|
u32 mask;
|
|
u32 reg;
|
|
|
|
if (crypto->cmd == SET_KEY) {
|
|
/*
|
|
* rt2x00lib can't determine the correct free
|
|
* key_idx for shared keys. We have 1 register
|
|
* with key valid bits. The goal is simple, read
|
|
* the register, if that is full we have no slots
|
|
* left.
|
|
* Note that each BSS is allowed to have up to 4
|
|
* shared keys, so put a mask over the allowed
|
|
* entries.
|
|
*/
|
|
mask = (0xf << crypto->bssidx);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, SEC_CSR0, ®);
|
|
reg &= mask;
|
|
|
|
if (reg && reg == mask)
|
|
return -ENOSPC;
|
|
|
|
key->hw_key_idx += reg ? ffz(reg) : 0;
|
|
|
|
/*
|
|
* Upload key to hardware
|
|
*/
|
|
memcpy(key_entry.key, crypto->key,
|
|
sizeof(key_entry.key));
|
|
memcpy(key_entry.tx_mic, crypto->tx_mic,
|
|
sizeof(key_entry.tx_mic));
|
|
memcpy(key_entry.rx_mic, crypto->rx_mic,
|
|
sizeof(key_entry.rx_mic));
|
|
|
|
reg = SHARED_KEY_ENTRY(key->hw_key_idx);
|
|
timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
|
|
rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
|
|
USB_VENDOR_REQUEST_OUT, reg,
|
|
&key_entry,
|
|
sizeof(key_entry),
|
|
timeout);
|
|
|
|
/*
|
|
* The cipher types are stored over 2 registers.
|
|
* bssidx 0 and 1 keys are stored in SEC_CSR1 and
|
|
* bssidx 1 and 2 keys are stored in SEC_CSR5.
|
|
* Using the correct defines correctly will cause overhead,
|
|
* so just calculate the correct offset.
|
|
*/
|
|
if (key->hw_key_idx < 8) {
|
|
field.bit_offset = (3 * key->hw_key_idx);
|
|
field.bit_mask = 0x7 << field.bit_offset;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, SEC_CSR1, ®);
|
|
rt2x00_set_field32(®, field, crypto->cipher);
|
|
rt2x00usb_register_write(rt2x00dev, SEC_CSR1, reg);
|
|
} else {
|
|
field.bit_offset = (3 * (key->hw_key_idx - 8));
|
|
field.bit_mask = 0x7 << field.bit_offset;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, SEC_CSR5, ®);
|
|
rt2x00_set_field32(®, field, crypto->cipher);
|
|
rt2x00usb_register_write(rt2x00dev, SEC_CSR5, reg);
|
|
}
|
|
|
|
/*
|
|
* The driver does not support the IV/EIV generation
|
|
* in hardware. However it doesn't support the IV/EIV
|
|
* inside the ieee80211 frame either, but requires it
|
|
* to be provided seperately for the descriptor.
|
|
* rt2x00lib will cut the IV/EIV data out of all frames
|
|
* given to us by mac80211, but we must tell mac80211
|
|
* to generate the IV/EIV data.
|
|
*/
|
|
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
|
|
}
|
|
|
|
/*
|
|
* SEC_CSR0 contains only single-bit fields to indicate
|
|
* a particular key is valid. Because using the FIELD32()
|
|
* defines directly will cause a lot of overhead we use
|
|
* a calculation to determine the correct bit directly.
|
|
*/
|
|
mask = 1 << key->hw_key_idx;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, SEC_CSR0, ®);
|
|
if (crypto->cmd == SET_KEY)
|
|
reg |= mask;
|
|
else if (crypto->cmd == DISABLE_KEY)
|
|
reg &= ~mask;
|
|
rt2x00usb_register_write(rt2x00dev, SEC_CSR0, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_crypto *crypto,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct hw_pairwise_ta_entry addr_entry;
|
|
struct hw_key_entry key_entry;
|
|
int timeout;
|
|
u32 mask;
|
|
u32 reg;
|
|
|
|
if (crypto->cmd == SET_KEY) {
|
|
/*
|
|
* rt2x00lib can't determine the correct free
|
|
* key_idx for pairwise keys. We have 2 registers
|
|
* with key valid bits. The goal is simple, read
|
|
* the first register, if that is full move to
|
|
* the next register.
|
|
* When both registers are full, we drop the key,
|
|
* otherwise we use the first invalid entry.
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, SEC_CSR2, ®);
|
|
if (reg && reg == ~0) {
|
|
key->hw_key_idx = 32;
|
|
rt2x00usb_register_read(rt2x00dev, SEC_CSR3, ®);
|
|
if (reg && reg == ~0)
|
|
return -ENOSPC;
|
|
}
|
|
|
|
key->hw_key_idx += reg ? ffz(reg) : 0;
|
|
|
|
/*
|
|
* Upload key to hardware
|
|
*/
|
|
memcpy(key_entry.key, crypto->key,
|
|
sizeof(key_entry.key));
|
|
memcpy(key_entry.tx_mic, crypto->tx_mic,
|
|
sizeof(key_entry.tx_mic));
|
|
memcpy(key_entry.rx_mic, crypto->rx_mic,
|
|
sizeof(key_entry.rx_mic));
|
|
|
|
reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
|
|
timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
|
|
rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
|
|
USB_VENDOR_REQUEST_OUT, reg,
|
|
&key_entry,
|
|
sizeof(key_entry),
|
|
timeout);
|
|
|
|
/*
|
|
* Send the address and cipher type to the hardware register.
|
|
* This data fits within the CSR cache size, so we can use
|
|
* rt2x00usb_register_multiwrite() directly.
|
|
*/
|
|
memset(&addr_entry, 0, sizeof(addr_entry));
|
|
memcpy(&addr_entry, crypto->address, ETH_ALEN);
|
|
addr_entry.cipher = crypto->cipher;
|
|
|
|
reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
|
|
rt2x00usb_register_multiwrite(rt2x00dev, reg,
|
|
&addr_entry, sizeof(addr_entry));
|
|
|
|
/*
|
|
* Enable pairwise lookup table for given BSS idx,
|
|
* without this received frames will not be decrypted
|
|
* by the hardware.
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, SEC_CSR4, ®);
|
|
reg |= (1 << crypto->bssidx);
|
|
rt2x00usb_register_write(rt2x00dev, SEC_CSR4, reg);
|
|
|
|
/*
|
|
* The driver does not support the IV/EIV generation
|
|
* in hardware. However it doesn't support the IV/EIV
|
|
* inside the ieee80211 frame either, but requires it
|
|
* to be provided seperately for the descriptor.
|
|
* rt2x00lib will cut the IV/EIV data out of all frames
|
|
* given to us by mac80211, but we must tell mac80211
|
|
* to generate the IV/EIV data.
|
|
*/
|
|
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
|
|
}
|
|
|
|
/*
|
|
* SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
|
|
* a particular key is valid. Because using the FIELD32()
|
|
* defines directly will cause a lot of overhead we use
|
|
* a calculation to determine the correct bit directly.
|
|
*/
|
|
if (key->hw_key_idx < 32) {
|
|
mask = 1 << key->hw_key_idx;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, SEC_CSR2, ®);
|
|
if (crypto->cmd == SET_KEY)
|
|
reg |= mask;
|
|
else if (crypto->cmd == DISABLE_KEY)
|
|
reg &= ~mask;
|
|
rt2x00usb_register_write(rt2x00dev, SEC_CSR2, reg);
|
|
} else {
|
|
mask = 1 << (key->hw_key_idx - 32);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, SEC_CSR3, ®);
|
|
if (crypto->cmd == SET_KEY)
|
|
reg |= mask;
|
|
else if (crypto->cmd == DISABLE_KEY)
|
|
reg &= ~mask;
|
|
rt2x00usb_register_write(rt2x00dev, SEC_CSR3, reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int filter_flags)
|
|
{
|
|
u32 reg;
|
|
|
|
/*
|
|
* Start configuration steps.
|
|
* Note that the version error will always be dropped
|
|
* and broadcast frames will always be accepted since
|
|
* there is no filter for it at this time.
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC,
|
|
!(filter_flags & FIF_FCSFAIL));
|
|
rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL,
|
|
!(filter_flags & FIF_PLCPFAIL));
|
|
rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL,
|
|
!(filter_flags & FIF_CONTROL));
|
|
rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME,
|
|
!(filter_flags & FIF_PROMISC_IN_BSS));
|
|
rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS,
|
|
!(filter_flags & FIF_PROMISC_IN_BSS) &&
|
|
!rt2x00dev->intf_ap_count);
|
|
rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST,
|
|
!(filter_flags & FIF_ALLMULTI));
|
|
rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0);
|
|
rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS,
|
|
!(filter_flags & FIF_CONTROL));
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
|
|
}
|
|
|
|
static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00_intf *intf,
|
|
struct rt2x00intf_conf *conf,
|
|
const unsigned int flags)
|
|
{
|
|
unsigned int beacon_base;
|
|
u32 reg;
|
|
|
|
if (flags & CONFIG_UPDATE_TYPE) {
|
|
/*
|
|
* Clear current synchronisation setup.
|
|
* For the Beacon base registers we only need to clear
|
|
* the first byte since that byte contains the VALID and OWNER
|
|
* bits which (when set to 0) will invalidate the entire beacon.
|
|
*/
|
|
beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
|
|
rt2x00usb_register_write(rt2x00dev, beacon_base, 0);
|
|
|
|
/*
|
|
* Enable synchronisation.
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync);
|
|
rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
|
|
}
|
|
|
|
if (flags & CONFIG_UPDATE_MAC) {
|
|
reg = le32_to_cpu(conf->mac[1]);
|
|
rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
|
|
conf->mac[1] = cpu_to_le32(reg);
|
|
|
|
rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR2,
|
|
conf->mac, sizeof(conf->mac));
|
|
}
|
|
|
|
if (flags & CONFIG_UPDATE_BSSID) {
|
|
reg = le32_to_cpu(conf->bssid[1]);
|
|
rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3);
|
|
conf->bssid[1] = cpu_to_le32(reg);
|
|
|
|
rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR4,
|
|
conf->bssid, sizeof(conf->bssid));
|
|
}
|
|
}
|
|
|
|
static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_erp *erp)
|
|
{
|
|
u32 reg;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE,
|
|
!!erp->short_preamble);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
|
|
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®);
|
|
rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time);
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR8, ®);
|
|
rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs);
|
|
rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
|
|
rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs);
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR8, reg);
|
|
}
|
|
|
|
static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
|
|
struct antenna_setup *ant)
|
|
{
|
|
u8 r3;
|
|
u8 r4;
|
|
u8 r77;
|
|
u8 temp;
|
|
|
|
rt73usb_bbp_read(rt2x00dev, 3, &r3);
|
|
rt73usb_bbp_read(rt2x00dev, 4, &r4);
|
|
rt73usb_bbp_read(rt2x00dev, 77, &r77);
|
|
|
|
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
|
|
|
|
/*
|
|
* Configure the RX antenna.
|
|
*/
|
|
switch (ant->rx) {
|
|
case ANTENNA_HW_DIVERSITY:
|
|
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
|
|
temp = !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)
|
|
&& (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ);
|
|
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp);
|
|
break;
|
|
case ANTENNA_A:
|
|
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
|
|
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
|
|
if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
|
|
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
|
|
else
|
|
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
|
|
break;
|
|
case ANTENNA_B:
|
|
default:
|
|
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
|
|
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
|
|
if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
|
|
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
|
|
else
|
|
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
|
|
break;
|
|
}
|
|
|
|
rt73usb_bbp_write(rt2x00dev, 77, r77);
|
|
rt73usb_bbp_write(rt2x00dev, 3, r3);
|
|
rt73usb_bbp_write(rt2x00dev, 4, r4);
|
|
}
|
|
|
|
static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
|
|
struct antenna_setup *ant)
|
|
{
|
|
u8 r3;
|
|
u8 r4;
|
|
u8 r77;
|
|
|
|
rt73usb_bbp_read(rt2x00dev, 3, &r3);
|
|
rt73usb_bbp_read(rt2x00dev, 4, &r4);
|
|
rt73usb_bbp_read(rt2x00dev, 77, &r77);
|
|
|
|
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
|
|
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
|
|
!test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
|
|
|
|
/*
|
|
* Configure the RX antenna.
|
|
*/
|
|
switch (ant->rx) {
|
|
case ANTENNA_HW_DIVERSITY:
|
|
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
|
|
break;
|
|
case ANTENNA_A:
|
|
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
|
|
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
|
|
break;
|
|
case ANTENNA_B:
|
|
default:
|
|
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
|
|
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
|
|
break;
|
|
}
|
|
|
|
rt73usb_bbp_write(rt2x00dev, 77, r77);
|
|
rt73usb_bbp_write(rt2x00dev, 3, r3);
|
|
rt73usb_bbp_write(rt2x00dev, 4, r4);
|
|
}
|
|
|
|
struct antenna_sel {
|
|
u8 word;
|
|
/*
|
|
* value[0] -> non-LNA
|
|
* value[1] -> LNA
|
|
*/
|
|
u8 value[2];
|
|
};
|
|
|
|
static const struct antenna_sel antenna_sel_a[] = {
|
|
{ 96, { 0x58, 0x78 } },
|
|
{ 104, { 0x38, 0x48 } },
|
|
{ 75, { 0xfe, 0x80 } },
|
|
{ 86, { 0xfe, 0x80 } },
|
|
{ 88, { 0xfe, 0x80 } },
|
|
{ 35, { 0x60, 0x60 } },
|
|
{ 97, { 0x58, 0x58 } },
|
|
{ 98, { 0x58, 0x58 } },
|
|
};
|
|
|
|
static const struct antenna_sel antenna_sel_bg[] = {
|
|
{ 96, { 0x48, 0x68 } },
|
|
{ 104, { 0x2c, 0x3c } },
|
|
{ 75, { 0xfe, 0x80 } },
|
|
{ 86, { 0xfe, 0x80 } },
|
|
{ 88, { 0xfe, 0x80 } },
|
|
{ 35, { 0x50, 0x50 } },
|
|
{ 97, { 0x48, 0x48 } },
|
|
{ 98, { 0x48, 0x48 } },
|
|
};
|
|
|
|
static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev,
|
|
struct antenna_setup *ant)
|
|
{
|
|
const struct antenna_sel *sel;
|
|
unsigned int lna;
|
|
unsigned int i;
|
|
u32 reg;
|
|
|
|
/*
|
|
* We should never come here because rt2x00lib is supposed
|
|
* to catch this and send us the correct antenna explicitely.
|
|
*/
|
|
BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
|
|
ant->tx == ANTENNA_SW_DIVERSITY);
|
|
|
|
if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
|
|
sel = antenna_sel_a;
|
|
lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
|
|
} else {
|
|
sel = antenna_sel_bg;
|
|
lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
|
|
rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, PHY_CSR0, ®);
|
|
|
|
rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG,
|
|
(rt2x00dev->curr_band == IEEE80211_BAND_2GHZ));
|
|
rt2x00_set_field32(®, PHY_CSR0_PA_PE_A,
|
|
(rt2x00dev->curr_band == IEEE80211_BAND_5GHZ));
|
|
|
|
rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg);
|
|
|
|
if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
|
|
rt2x00_rf(&rt2x00dev->chip, RF5225))
|
|
rt73usb_config_antenna_5x(rt2x00dev, ant);
|
|
else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
|
|
rt2x00_rf(&rt2x00dev->chip, RF2527))
|
|
rt73usb_config_antenna_2x(rt2x00dev, ant);
|
|
}
|
|
|
|
static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_conf *libconf)
|
|
{
|
|
u16 eeprom;
|
|
short lna_gain = 0;
|
|
|
|
if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) {
|
|
if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
|
|
lna_gain += 14;
|
|
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
|
|
lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
|
|
} else {
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
|
|
lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
|
|
}
|
|
|
|
rt2x00dev->lna_gain = lna_gain;
|
|
}
|
|
|
|
static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev,
|
|
struct rf_channel *rf, const int txpower)
|
|
{
|
|
u8 r3;
|
|
u8 r94;
|
|
u8 smart;
|
|
|
|
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
|
|
rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
|
|
|
|
smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
|
|
rt2x00_rf(&rt2x00dev->chip, RF2527));
|
|
|
|
rt73usb_bbp_read(rt2x00dev, 3, &r3);
|
|
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
|
|
rt73usb_bbp_write(rt2x00dev, 3, r3);
|
|
|
|
r94 = 6;
|
|
if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
|
|
r94 += txpower - MAX_TXPOWER;
|
|
else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
|
|
r94 += txpower;
|
|
rt73usb_bbp_write(rt2x00dev, 94, r94);
|
|
|
|
rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
|
|
rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
|
|
rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
|
|
rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
|
|
|
|
rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
|
|
rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
|
|
rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
|
|
rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
|
|
|
|
rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
|
|
rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
|
|
rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
|
|
rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev,
|
|
const int txpower)
|
|
{
|
|
struct rf_channel rf;
|
|
|
|
rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
|
|
rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
|
|
rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
|
|
rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
|
|
|
|
rt73usb_config_channel(rt2x00dev, &rf, txpower);
|
|
}
|
|
|
|
static void rt73usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_conf *libconf)
|
|
{
|
|
u32 reg;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT,
|
|
libconf->conf->long_frame_max_tx_count);
|
|
rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT,
|
|
libconf->conf->short_frame_max_tx_count);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
|
|
}
|
|
|
|
static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_conf *libconf)
|
|
{
|
|
u32 reg;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL,
|
|
libconf->conf->beacon_int * 16);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
|
|
}
|
|
|
|
static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_conf *libconf,
|
|
const unsigned int flags)
|
|
{
|
|
/* Always recalculate LNA gain before changing configuration */
|
|
rt73usb_config_lna_gain(rt2x00dev, libconf);
|
|
|
|
if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
|
|
rt73usb_config_channel(rt2x00dev, &libconf->rf,
|
|
libconf->conf->power_level);
|
|
if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
|
|
!(flags & IEEE80211_CONF_CHANGE_CHANNEL))
|
|
rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level);
|
|
if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
|
|
rt73usb_config_retry_limit(rt2x00dev, libconf);
|
|
if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
|
|
rt73usb_config_duration(rt2x00dev, libconf);
|
|
}
|
|
|
|
/*
|
|
* Link tuning
|
|
*/
|
|
static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev,
|
|
struct link_qual *qual)
|
|
{
|
|
u32 reg;
|
|
|
|
/*
|
|
* Update FCS error count from register.
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, STA_CSR0, ®);
|
|
qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
|
|
|
|
/*
|
|
* Update False CCA count from register.
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, STA_CSR1, ®);
|
|
qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
|
|
}
|
|
|
|
static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt73usb_bbp_write(rt2x00dev, 17, 0x20);
|
|
rt2x00dev->link.vgc_level = 0x20;
|
|
}
|
|
|
|
static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
|
|
u8 r17;
|
|
u8 up_bound;
|
|
u8 low_bound;
|
|
|
|
rt73usb_bbp_read(rt2x00dev, 17, &r17);
|
|
|
|
/*
|
|
* Determine r17 bounds.
|
|
*/
|
|
if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
|
|
low_bound = 0x28;
|
|
up_bound = 0x48;
|
|
|
|
if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
|
|
low_bound += 0x10;
|
|
up_bound += 0x10;
|
|
}
|
|
} else {
|
|
if (rssi > -82) {
|
|
low_bound = 0x1c;
|
|
up_bound = 0x40;
|
|
} else if (rssi > -84) {
|
|
low_bound = 0x1c;
|
|
up_bound = 0x20;
|
|
} else {
|
|
low_bound = 0x1c;
|
|
up_bound = 0x1c;
|
|
}
|
|
|
|
if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
|
|
low_bound += 0x14;
|
|
up_bound += 0x10;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we are not associated, we should go straight to the
|
|
* dynamic CCA tuning.
|
|
*/
|
|
if (!rt2x00dev->intf_associated)
|
|
goto dynamic_cca_tune;
|
|
|
|
/*
|
|
* Special big-R17 for very short distance
|
|
*/
|
|
if (rssi > -35) {
|
|
if (r17 != 0x60)
|
|
rt73usb_bbp_write(rt2x00dev, 17, 0x60);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Special big-R17 for short distance
|
|
*/
|
|
if (rssi >= -58) {
|
|
if (r17 != up_bound)
|
|
rt73usb_bbp_write(rt2x00dev, 17, up_bound);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Special big-R17 for middle-short distance
|
|
*/
|
|
if (rssi >= -66) {
|
|
low_bound += 0x10;
|
|
if (r17 != low_bound)
|
|
rt73usb_bbp_write(rt2x00dev, 17, low_bound);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Special mid-R17 for middle distance
|
|
*/
|
|
if (rssi >= -74) {
|
|
if (r17 != (low_bound + 0x10))
|
|
rt73usb_bbp_write(rt2x00dev, 17, low_bound + 0x08);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Special case: Change up_bound based on the rssi.
|
|
* Lower up_bound when rssi is weaker then -74 dBm.
|
|
*/
|
|
up_bound -= 2 * (-74 - rssi);
|
|
if (low_bound > up_bound)
|
|
up_bound = low_bound;
|
|
|
|
if (r17 > up_bound) {
|
|
rt73usb_bbp_write(rt2x00dev, 17, up_bound);
|
|
return;
|
|
}
|
|
|
|
dynamic_cca_tune:
|
|
|
|
/*
|
|
* r17 does not yet exceed upper limit, continue and base
|
|
* the r17 tuning on the false CCA count.
|
|
*/
|
|
if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
|
|
r17 += 4;
|
|
if (r17 > up_bound)
|
|
r17 = up_bound;
|
|
rt73usb_bbp_write(rt2x00dev, 17, r17);
|
|
} else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
|
|
r17 -= 4;
|
|
if (r17 < low_bound)
|
|
r17 = low_bound;
|
|
rt73usb_bbp_write(rt2x00dev, 17, r17);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Firmware functions
|
|
*/
|
|
static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
return FIRMWARE_RT2571;
|
|
}
|
|
|
|
static u16 rt73usb_get_firmware_crc(const void *data, const size_t len)
|
|
{
|
|
u16 crc;
|
|
|
|
/*
|
|
* Use the crc itu-t algorithm.
|
|
* The last 2 bytes in the firmware array are the crc checksum itself,
|
|
* this means that we should never pass those 2 bytes to the crc
|
|
* algorithm.
|
|
*/
|
|
crc = crc_itu_t(0, data, len - 2);
|
|
crc = crc_itu_t_byte(crc, 0);
|
|
crc = crc_itu_t_byte(crc, 0);
|
|
|
|
return crc;
|
|
}
|
|
|
|
static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
|
|
const size_t len)
|
|
{
|
|
unsigned int i;
|
|
int status;
|
|
u32 reg;
|
|
|
|
/*
|
|
* Wait for stable hardware.
|
|
*/
|
|
for (i = 0; i < 100; i++) {
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®);
|
|
if (reg)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
|
|
if (!reg) {
|
|
ERROR(rt2x00dev, "Unstable hardware.\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Write firmware to device.
|
|
*/
|
|
rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
|
|
USB_VENDOR_REQUEST_OUT,
|
|
FIRMWARE_IMAGE_BASE,
|
|
data, len,
|
|
REGISTER_TIMEOUT32(len));
|
|
|
|
/*
|
|
* Send firmware request to device to load firmware,
|
|
* we need to specify a long timeout time.
|
|
*/
|
|
status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
|
|
0, USB_MODE_FIRMWARE,
|
|
REGISTER_TIMEOUT_FIRMWARE);
|
|
if (status < 0) {
|
|
ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialization functions.
|
|
*/
|
|
static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0);
|
|
rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR1, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
|
|
rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
|
|
rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1_VALID, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
|
|
rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
|
|
rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR1, reg);
|
|
|
|
/*
|
|
* CCK TXD BBP registers
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR2, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13);
|
|
rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12);
|
|
rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1_VALID, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2, 11);
|
|
rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10);
|
|
rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR2, reg);
|
|
|
|
/*
|
|
* OFDM TXD BBP registers
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR3, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7);
|
|
rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6);
|
|
rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5);
|
|
rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR3, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR7, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59);
|
|
rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53);
|
|
rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49);
|
|
rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR7, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR8, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44);
|
|
rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42);
|
|
rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42);
|
|
rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR8, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0);
|
|
rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0);
|
|
rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0);
|
|
rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
|
|
rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
|
|
rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
|
|
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR6, ®);
|
|
rt2x00_set_field32(®, MAC_CSR6_MAX_FRAME_UNIT, 0xfff);
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR6, reg);
|
|
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718);
|
|
|
|
if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
|
|
return -EBUSY;
|
|
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00);
|
|
|
|
/*
|
|
* Invalidate all Shared Keys (SEC_CSR0),
|
|
* and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
|
|
*/
|
|
rt2x00usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
|
|
rt2x00usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
|
|
rt2x00usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
|
|
|
|
reg = 0x000023b0;
|
|
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
|
|
rt2x00_rf(&rt2x00dev->chip, RF2527))
|
|
rt2x00_set_field32(®, PHY_CSR1_RF_RPI, 1);
|
|
rt2x00usb_register_write(rt2x00dev, PHY_CSR1, reg);
|
|
|
|
rt2x00usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06);
|
|
rt2x00usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
|
|
rt2x00usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®);
|
|
rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0);
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg);
|
|
|
|
/*
|
|
* Clear all beacons
|
|
* For the Beacon base registers we only need to clear
|
|
* the first byte since that byte contains the VALID and OWNER
|
|
* bits which (when set to 0) will invalidate the entire beacon.
|
|
*/
|
|
rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
|
|
rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
|
|
rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
|
|
rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
|
|
|
|
/*
|
|
* We must clear the error counters.
|
|
* These registers are cleared on read,
|
|
* so we may pass a useless variable to store the value.
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, STA_CSR0, ®);
|
|
rt2x00usb_register_read(rt2x00dev, STA_CSR1, ®);
|
|
rt2x00usb_register_read(rt2x00dev, STA_CSR2, ®);
|
|
|
|
/*
|
|
* Reset MAC and BBP registers.
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®);
|
|
rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1);
|
|
rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1);
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®);
|
|
rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0);
|
|
rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0);
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®);
|
|
rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1);
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt73usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
unsigned int i;
|
|
u8 value;
|
|
|
|
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
|
|
rt73usb_bbp_read(rt2x00dev, 0, &value);
|
|
if ((value != 0xff) && (value != 0x00))
|
|
return 0;
|
|
udelay(REGISTER_BUSY_DELAY);
|
|
}
|
|
|
|
ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
|
|
return -EACCES;
|
|
}
|
|
|
|
static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
unsigned int i;
|
|
u16 eeprom;
|
|
u8 reg_id;
|
|
u8 value;
|
|
|
|
if (unlikely(rt73usb_wait_bbp_ready(rt2x00dev)))
|
|
return -EACCES;
|
|
|
|
rt73usb_bbp_write(rt2x00dev, 3, 0x80);
|
|
rt73usb_bbp_write(rt2x00dev, 15, 0x30);
|
|
rt73usb_bbp_write(rt2x00dev, 21, 0xc8);
|
|
rt73usb_bbp_write(rt2x00dev, 22, 0x38);
|
|
rt73usb_bbp_write(rt2x00dev, 23, 0x06);
|
|
rt73usb_bbp_write(rt2x00dev, 24, 0xfe);
|
|
rt73usb_bbp_write(rt2x00dev, 25, 0x0a);
|
|
rt73usb_bbp_write(rt2x00dev, 26, 0x0d);
|
|
rt73usb_bbp_write(rt2x00dev, 32, 0x0b);
|
|
rt73usb_bbp_write(rt2x00dev, 34, 0x12);
|
|
rt73usb_bbp_write(rt2x00dev, 37, 0x07);
|
|
rt73usb_bbp_write(rt2x00dev, 39, 0xf8);
|
|
rt73usb_bbp_write(rt2x00dev, 41, 0x60);
|
|
rt73usb_bbp_write(rt2x00dev, 53, 0x10);
|
|
rt73usb_bbp_write(rt2x00dev, 54, 0x18);
|
|
rt73usb_bbp_write(rt2x00dev, 60, 0x10);
|
|
rt73usb_bbp_write(rt2x00dev, 61, 0x04);
|
|
rt73usb_bbp_write(rt2x00dev, 62, 0x04);
|
|
rt73usb_bbp_write(rt2x00dev, 75, 0xfe);
|
|
rt73usb_bbp_write(rt2x00dev, 86, 0xfe);
|
|
rt73usb_bbp_write(rt2x00dev, 88, 0xfe);
|
|
rt73usb_bbp_write(rt2x00dev, 90, 0x0f);
|
|
rt73usb_bbp_write(rt2x00dev, 99, 0x00);
|
|
rt73usb_bbp_write(rt2x00dev, 102, 0x16);
|
|
rt73usb_bbp_write(rt2x00dev, 107, 0x04);
|
|
|
|
for (i = 0; i < EEPROM_BBP_SIZE; i++) {
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
|
|
|
|
if (eeprom != 0xffff && eeprom != 0x0000) {
|
|
reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
|
|
value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
|
|
rt73usb_bbp_write(rt2x00dev, reg_id, value);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Device state switch handlers.
|
|
*/
|
|
static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
|
|
enum dev_state state)
|
|
{
|
|
u32 reg;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX,
|
|
(state == STATE_RADIO_RX_OFF) ||
|
|
(state == STATE_RADIO_RX_OFF_LINK));
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
|
|
}
|
|
|
|
static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
/*
|
|
* Initialize all registers.
|
|
*/
|
|
if (unlikely(rt73usb_init_registers(rt2x00dev) ||
|
|
rt73usb_init_bbp(rt2x00dev)))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
|
|
|
|
/*
|
|
* Disable synchronisation.
|
|
*/
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, 0);
|
|
|
|
rt2x00usb_disable_radio(rt2x00dev);
|
|
}
|
|
|
|
static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
|
|
{
|
|
u32 reg;
|
|
unsigned int i;
|
|
char put_to_sleep;
|
|
|
|
put_to_sleep = (state != STATE_AWAKE);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR12, ®);
|
|
rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
|
|
rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
|
|
rt2x00usb_register_write(rt2x00dev, MAC_CSR12, reg);
|
|
|
|
/*
|
|
* Device is not guaranteed to be in the requested state yet.
|
|
* We must wait until the register indicates that the
|
|
* device has entered the correct state.
|
|
*/
|
|
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR12, ®);
|
|
state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
|
|
if (state == !put_to_sleep)
|
|
return 0;
|
|
msleep(10);
|
|
}
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
|
|
enum dev_state state)
|
|
{
|
|
int retval = 0;
|
|
|
|
switch (state) {
|
|
case STATE_RADIO_ON:
|
|
retval = rt73usb_enable_radio(rt2x00dev);
|
|
break;
|
|
case STATE_RADIO_OFF:
|
|
rt73usb_disable_radio(rt2x00dev);
|
|
break;
|
|
case STATE_RADIO_RX_ON:
|
|
case STATE_RADIO_RX_ON_LINK:
|
|
case STATE_RADIO_RX_OFF:
|
|
case STATE_RADIO_RX_OFF_LINK:
|
|
rt73usb_toggle_rx(rt2x00dev, state);
|
|
break;
|
|
case STATE_RADIO_IRQ_ON:
|
|
case STATE_RADIO_IRQ_OFF:
|
|
/* No support, but no error either */
|
|
break;
|
|
case STATE_DEEP_SLEEP:
|
|
case STATE_SLEEP:
|
|
case STATE_STANDBY:
|
|
case STATE_AWAKE:
|
|
retval = rt73usb_set_state(rt2x00dev, state);
|
|
break;
|
|
default:
|
|
retval = -ENOTSUPP;
|
|
break;
|
|
}
|
|
|
|
if (unlikely(retval))
|
|
ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
|
|
state, retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* TX descriptor initialization
|
|
*/
|
|
static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
|
|
struct sk_buff *skb,
|
|
struct txentry_desc *txdesc)
|
|
{
|
|
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
|
|
__le32 *txd = skbdesc->desc;
|
|
u32 word;
|
|
|
|
/*
|
|
* Start writing the descriptor words.
|
|
*/
|
|
rt2x00_desc_read(txd, 1, &word);
|
|
rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue);
|
|
rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
|
|
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
|
|
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
|
|
rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
|
|
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
|
|
test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
|
|
rt2x00_desc_write(txd, 1, word);
|
|
|
|
rt2x00_desc_read(txd, 2, &word);
|
|
rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
|
|
rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
|
|
rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
|
|
rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
|
|
rt2x00_desc_write(txd, 2, word);
|
|
|
|
if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
|
|
_rt2x00_desc_write(txd, 3, skbdesc->iv);
|
|
_rt2x00_desc_write(txd, 4, skbdesc->eiv);
|
|
}
|
|
|
|
rt2x00_desc_read(txd, 5, &word);
|
|
rt2x00_set_field32(&word, TXD_W5_TX_POWER,
|
|
TXPOWER_TO_DEV(rt2x00dev->tx_power));
|
|
rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
|
|
rt2x00_desc_write(txd, 5, word);
|
|
|
|
rt2x00_desc_read(txd, 0, &word);
|
|
rt2x00_set_field32(&word, TXD_W0_BURST,
|
|
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXD_W0_VALID, 1);
|
|
rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
|
|
test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXD_W0_ACK,
|
|
test_bit(ENTRY_TXD_ACK, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
|
|
test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXD_W0_OFDM,
|
|
test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
|
|
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
|
|
test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
|
|
test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
|
|
test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
|
|
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
|
|
rt2x00_set_field32(&word, TXD_W0_BURST2,
|
|
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
|
|
rt2x00_desc_write(txd, 0, word);
|
|
}
|
|
|
|
/*
|
|
* TX data initialization
|
|
*/
|
|
static void rt73usb_write_beacon(struct queue_entry *entry)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
|
|
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
|
|
unsigned int beacon_base;
|
|
u32 reg;
|
|
|
|
/*
|
|
* Add the descriptor in front of the skb.
|
|
*/
|
|
skb_push(entry->skb, entry->queue->desc_size);
|
|
memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
|
|
skbdesc->desc = entry->skb->data;
|
|
|
|
/*
|
|
* Disable beaconing while we are reloading the beacon data,
|
|
* otherwise we might be sending out invalid data.
|
|
*/
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
|
|
rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0);
|
|
rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
|
|
rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
|
|
|
|
/*
|
|
* Write entire beacon with descriptor to register.
|
|
*/
|
|
beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
|
|
rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
|
|
USB_VENDOR_REQUEST_OUT, beacon_base,
|
|
entry->skb->data, entry->skb->len,
|
|
REGISTER_TIMEOUT32(entry->skb->len));
|
|
|
|
/*
|
|
* Clean up the beacon skb.
|
|
*/
|
|
dev_kfree_skb(entry->skb);
|
|
entry->skb = NULL;
|
|
}
|
|
|
|
static int rt73usb_get_tx_data_len(struct queue_entry *entry)
|
|
{
|
|
int length;
|
|
|
|
/*
|
|
* The length _must_ be a multiple of 4,
|
|
* but it must _not_ be a multiple of the USB packet size.
|
|
*/
|
|
length = roundup(entry->skb->len, 4);
|
|
length += (4 * !(length % entry->queue->usb_maxpacket));
|
|
|
|
return length;
|
|
}
|
|
|
|
static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
|
|
const enum data_queue_qid queue)
|
|
{
|
|
u32 reg;
|
|
|
|
if (queue != QID_BEACON) {
|
|
rt2x00usb_kick_tx_queue(rt2x00dev, queue);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* For Wi-Fi faily generated beacons between participating stations.
|
|
* Set TBTT phase adaptive adjustment step to 8us (default 16us)
|
|
*/
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
|
|
if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
|
|
rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
|
|
rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1);
|
|
rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* RX control handlers
|
|
*/
|
|
static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
|
|
{
|
|
u8 offset = rt2x00dev->lna_gain;
|
|
u8 lna;
|
|
|
|
lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
|
|
switch (lna) {
|
|
case 3:
|
|
offset += 90;
|
|
break;
|
|
case 2:
|
|
offset += 74;
|
|
break;
|
|
case 1:
|
|
offset += 64;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
|
|
if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
|
|
if (lna == 3 || lna == 2)
|
|
offset += 10;
|
|
} else {
|
|
if (lna == 3)
|
|
offset += 6;
|
|
else if (lna == 2)
|
|
offset += 8;
|
|
}
|
|
}
|
|
|
|
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
|
|
}
|
|
|
|
static void rt73usb_fill_rxdone(struct queue_entry *entry,
|
|
struct rxdone_entry_desc *rxdesc)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
|
|
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
|
|
__le32 *rxd = (__le32 *)entry->skb->data;
|
|
u32 word0;
|
|
u32 word1;
|
|
|
|
/*
|
|
* Copy descriptor to the skbdesc->desc buffer, making it safe from moving of
|
|
* frame data in rt2x00usb.
|
|
*/
|
|
memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
|
|
rxd = (__le32 *)skbdesc->desc;
|
|
|
|
/*
|
|
* It is now safe to read the descriptor on all architectures.
|
|
*/
|
|
rt2x00_desc_read(rxd, 0, &word0);
|
|
rt2x00_desc_read(rxd, 1, &word1);
|
|
|
|
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
|
|
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
|
|
|
|
if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
|
|
rxdesc->cipher =
|
|
rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
|
|
rxdesc->cipher_status =
|
|
rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
|
|
}
|
|
|
|
if (rxdesc->cipher != CIPHER_NONE) {
|
|
_rt2x00_desc_read(rxd, 2, &rxdesc->iv);
|
|
_rt2x00_desc_read(rxd, 3, &rxdesc->eiv);
|
|
_rt2x00_desc_read(rxd, 4, &rxdesc->icv);
|
|
|
|
/*
|
|
* Hardware has stripped IV/EIV data from 802.11 frame during
|
|
* decryption. It has provided the data seperately but rt2x00lib
|
|
* should decide if it should be reinserted.
|
|
*/
|
|
rxdesc->flags |= RX_FLAG_IV_STRIPPED;
|
|
|
|
/*
|
|
* FIXME: Legacy driver indicates that the frame does
|
|
* contain the Michael Mic. Unfortunately, in rt2x00
|
|
* the MIC seems to be missing completely...
|
|
*/
|
|
rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
|
|
|
|
if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
|
|
rxdesc->flags |= RX_FLAG_DECRYPTED;
|
|
else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
|
|
rxdesc->flags |= RX_FLAG_MMIC_ERROR;
|
|
}
|
|
|
|
/*
|
|
* Obtain the status about this packet.
|
|
* When frame was received with an OFDM bitrate,
|
|
* the signal is the PLCP value. If it was received with
|
|
* a CCK bitrate the signal is the rate in 100kbit/s.
|
|
*/
|
|
rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
|
|
rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1);
|
|
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
|
|
|
|
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
|
|
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
|
|
else
|
|
rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
|
|
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
|
|
rxdesc->dev_flags |= RXDONE_MY_BSS;
|
|
|
|
/*
|
|
* Set skb pointers, and update frame information.
|
|
*/
|
|
skb_pull(entry->skb, entry->queue->desc_size);
|
|
skb_trim(entry->skb, rxdesc->size);
|
|
}
|
|
|
|
/*
|
|
* Device probe functions.
|
|
*/
|
|
static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u16 word;
|
|
u8 *mac;
|
|
s8 value;
|
|
|
|
rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
|
|
|
|
/*
|
|
* Start validation of the data that has been read.
|
|
*/
|
|
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
|
|
if (!is_valid_ether_addr(mac)) {
|
|
random_ether_addr(mac);
|
|
EEPROM(rt2x00dev, "MAC: %pM\n", mac);
|
|
}
|
|
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
|
|
if (word == 0xffff) {
|
|
rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
|
|
rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
|
|
ANTENNA_B);
|
|
rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
|
|
ANTENNA_B);
|
|
rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
|
|
rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
|
|
rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
|
|
rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226);
|
|
rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
|
|
EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
|
|
}
|
|
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
|
|
if (word == 0xffff) {
|
|
rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0);
|
|
rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
|
|
EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
|
|
}
|
|
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
|
|
if (word == 0xffff) {
|
|
rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0);
|
|
rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0);
|
|
rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0);
|
|
rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0);
|
|
rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0);
|
|
rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0);
|
|
rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0);
|
|
rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0);
|
|
rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
|
|
LED_MODE_DEFAULT);
|
|
rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
|
|
EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
|
|
}
|
|
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
|
|
if (word == 0xffff) {
|
|
rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
|
|
rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
|
|
rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
|
|
EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
|
|
}
|
|
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
|
|
if (word == 0xffff) {
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
|
|
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
|
|
EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
|
|
} else {
|
|
value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
|
|
if (value < -10 || value > 10)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
|
|
value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
|
|
if (value < -10 || value > 10)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
|
|
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
|
|
}
|
|
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
|
|
if (word == 0xffff) {
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
|
|
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
|
|
EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
|
|
} else {
|
|
value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
|
|
if (value < -10 || value > 10)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
|
|
value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
|
|
if (value < -10 || value > 10)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
|
|
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
u16 value;
|
|
u16 eeprom;
|
|
|
|
/*
|
|
* Read EEPROM word for configuration.
|
|
*/
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
|
|
|
|
/*
|
|
* Identify RF chipset.
|
|
*/
|
|
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
|
|
rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®);
|
|
rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
|
|
|
|
if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) {
|
|
ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
|
|
!rt2x00_rf(&rt2x00dev->chip, RF2528) &&
|
|
!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
|
|
!rt2x00_rf(&rt2x00dev->chip, RF2527)) {
|
|
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Identify default antenna configuration.
|
|
*/
|
|
rt2x00dev->default_ant.tx =
|
|
rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
|
|
rt2x00dev->default_ant.rx =
|
|
rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
|
|
|
|
/*
|
|
* Read the Frame type.
|
|
*/
|
|
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
|
|
__set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
|
|
|
|
/*
|
|
* Read frequency offset.
|
|
*/
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
|
|
rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
|
|
|
|
/*
|
|
* Read external LNA informations.
|
|
*/
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
|
|
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) {
|
|
__set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
|
|
__set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
|
|
}
|
|
|
|
/*
|
|
* Store led settings, for correct led behaviour.
|
|
*/
|
|
#ifdef CONFIG_RT2X00_LIB_LEDS
|
|
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
|
|
|
|
rt73usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
|
|
rt73usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
|
|
if (value == LED_MODE_SIGNAL_STRENGTH)
|
|
rt73usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
|
|
LED_TYPE_QUALITY);
|
|
|
|
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
|
|
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
|
|
rt2x00_get_field16(eeprom,
|
|
EEPROM_LED_POLARITY_GPIO_0));
|
|
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
|
|
rt2x00_get_field16(eeprom,
|
|
EEPROM_LED_POLARITY_GPIO_1));
|
|
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
|
|
rt2x00_get_field16(eeprom,
|
|
EEPROM_LED_POLARITY_GPIO_2));
|
|
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
|
|
rt2x00_get_field16(eeprom,
|
|
EEPROM_LED_POLARITY_GPIO_3));
|
|
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
|
|
rt2x00_get_field16(eeprom,
|
|
EEPROM_LED_POLARITY_GPIO_4));
|
|
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
|
|
rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
|
|
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
|
|
rt2x00_get_field16(eeprom,
|
|
EEPROM_LED_POLARITY_RDY_G));
|
|
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
|
|
rt2x00_get_field16(eeprom,
|
|
EEPROM_LED_POLARITY_RDY_A));
|
|
#endif /* CONFIG_RT2X00_LIB_LEDS */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* RF value list for RF2528
|
|
* Supports: 2.4 GHz
|
|
*/
|
|
static const struct rf_channel rf_vals_bg_2528[] = {
|
|
{ 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
|
|
{ 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
|
|
{ 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
|
|
{ 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
|
|
{ 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
|
|
{ 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
|
|
{ 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
|
|
{ 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
|
|
{ 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
|
|
{ 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
|
|
{ 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
|
|
{ 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
|
|
{ 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
|
|
{ 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
|
|
};
|
|
|
|
/*
|
|
* RF value list for RF5226
|
|
* Supports: 2.4 GHz & 5.2 GHz
|
|
*/
|
|
static const struct rf_channel rf_vals_5226[] = {
|
|
{ 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
|
|
{ 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
|
|
{ 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
|
|
{ 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
|
|
{ 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
|
|
{ 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
|
|
{ 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
|
|
{ 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
|
|
{ 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
|
|
{ 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
|
|
{ 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
|
|
{ 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
|
|
{ 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
|
|
{ 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
|
|
|
|
/* 802.11 UNI / HyperLan 2 */
|
|
{ 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 },
|
|
{ 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 },
|
|
{ 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b },
|
|
{ 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 },
|
|
{ 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b },
|
|
{ 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 },
|
|
{ 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 },
|
|
{ 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b },
|
|
|
|
/* 802.11 HyperLan 2 */
|
|
{ 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 },
|
|
{ 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b },
|
|
{ 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 },
|
|
{ 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b },
|
|
{ 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 },
|
|
{ 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 },
|
|
{ 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b },
|
|
{ 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 },
|
|
{ 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b },
|
|
{ 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 },
|
|
|
|
/* 802.11 UNII */
|
|
{ 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 },
|
|
{ 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f },
|
|
{ 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 },
|
|
{ 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 },
|
|
{ 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f },
|
|
{ 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 },
|
|
|
|
/* MMAC(Japan)J52 ch 34,38,42,46 */
|
|
{ 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b },
|
|
{ 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 },
|
|
{ 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b },
|
|
{ 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 },
|
|
};
|
|
|
|
/*
|
|
* RF value list for RF5225 & RF2527
|
|
* Supports: 2.4 GHz & 5.2 GHz
|
|
*/
|
|
static const struct rf_channel rf_vals_5225_2527[] = {
|
|
{ 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
|
|
{ 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
|
|
{ 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
|
|
{ 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
|
|
{ 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
|
|
{ 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
|
|
{ 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
|
|
{ 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
|
|
{ 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
|
|
{ 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
|
|
{ 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
|
|
{ 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
|
|
{ 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
|
|
{ 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
|
|
|
|
/* 802.11 UNI / HyperLan 2 */
|
|
{ 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
|
|
{ 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
|
|
{ 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
|
|
{ 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
|
|
{ 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
|
|
{ 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
|
|
{ 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
|
|
{ 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
|
|
|
|
/* 802.11 HyperLan 2 */
|
|
{ 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
|
|
{ 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
|
|
{ 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
|
|
{ 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
|
|
{ 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
|
|
{ 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
|
|
{ 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
|
|
{ 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
|
|
{ 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
|
|
{ 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
|
|
|
|
/* 802.11 UNII */
|
|
{ 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
|
|
{ 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
|
|
{ 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
|
|
{ 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
|
|
{ 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
|
|
{ 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
|
|
|
|
/* MMAC(Japan)J52 ch 34,38,42,46 */
|
|
{ 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
|
|
{ 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
|
|
{ 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
|
|
{ 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
|
|
};
|
|
|
|
|
|
static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct hw_mode_spec *spec = &rt2x00dev->spec;
|
|
struct channel_info *info;
|
|
char *tx_power;
|
|
unsigned int i;
|
|
|
|
/*
|
|
* Initialize all hw fields.
|
|
*/
|
|
rt2x00dev->hw->flags =
|
|
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
|
|
IEEE80211_HW_SIGNAL_DBM;
|
|
rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
|
|
|
|
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
|
|
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
|
|
rt2x00_eeprom_addr(rt2x00dev,
|
|
EEPROM_MAC_ADDR_0));
|
|
|
|
/*
|
|
* Initialize hw_mode information.
|
|
*/
|
|
spec->supported_bands = SUPPORT_BAND_2GHZ;
|
|
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
|
|
|
|
if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
|
|
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
|
|
spec->channels = rf_vals_bg_2528;
|
|
} else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
|
|
spec->supported_bands |= SUPPORT_BAND_5GHZ;
|
|
spec->num_channels = ARRAY_SIZE(rf_vals_5226);
|
|
spec->channels = rf_vals_5226;
|
|
} else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
|
|
spec->num_channels = 14;
|
|
spec->channels = rf_vals_5225_2527;
|
|
} else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
|
|
spec->supported_bands |= SUPPORT_BAND_5GHZ;
|
|
spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
|
|
spec->channels = rf_vals_5225_2527;
|
|
}
|
|
|
|
/*
|
|
* Create channel information array
|
|
*/
|
|
info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
spec->channels_info = info;
|
|
|
|
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
|
|
for (i = 0; i < 14; i++)
|
|
info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
|
|
|
|
if (spec->num_channels > 14) {
|
|
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
|
|
for (i = 14; i < spec->num_channels; i++)
|
|
info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
int retval;
|
|
|
|
/*
|
|
* Allocate eeprom data.
|
|
*/
|
|
retval = rt73usb_validate_eeprom(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
retval = rt73usb_init_eeprom(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* Initialize hw specifications.
|
|
*/
|
|
retval = rt73usb_probe_hw_mode(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* This device requires firmware.
|
|
*/
|
|
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
|
|
__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
|
|
if (!modparam_nohwcrypt)
|
|
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
|
|
|
|
/*
|
|
* Set the rssi offset.
|
|
*/
|
|
rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* IEEE80211 stack callback functions.
|
|
*/
|
|
static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
|
|
const struct ieee80211_tx_queue_params *params)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
struct data_queue *queue;
|
|
struct rt2x00_field32 field;
|
|
int retval;
|
|
u32 reg;
|
|
|
|
/*
|
|
* First pass the configuration through rt2x00lib, that will
|
|
* update the queue settings and validate the input. After that
|
|
* we are free to update the registers based on the value
|
|
* in the queue parameter.
|
|
*/
|
|
retval = rt2x00mac_conf_tx(hw, queue_idx, params);
|
|
if (retval)
|
|
return retval;
|
|
|
|
queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
|
|
|
|
/* Update WMM TXOP register */
|
|
if (queue_idx < 2) {
|
|
field.bit_offset = queue_idx * 16;
|
|
field.bit_mask = 0xffff << field.bit_offset;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®);
|
|
rt2x00_set_field32(®, field, queue->txop);
|
|
rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
|
|
} else if (queue_idx < 4) {
|
|
field.bit_offset = (queue_idx - 2) * 16;
|
|
field.bit_mask = 0xffff << field.bit_offset;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®);
|
|
rt2x00_set_field32(®, field, queue->txop);
|
|
rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
|
|
}
|
|
|
|
/* Update WMM registers */
|
|
field.bit_offset = queue_idx * 4;
|
|
field.bit_mask = 0xf << field.bit_offset;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, AIFSN_CSR, ®);
|
|
rt2x00_set_field32(®, field, queue->aifs);
|
|
rt2x00usb_register_write(rt2x00dev, AIFSN_CSR, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, CWMIN_CSR, ®);
|
|
rt2x00_set_field32(®, field, queue->cw_min);
|
|
rt2x00usb_register_write(rt2x00dev, CWMIN_CSR, reg);
|
|
|
|
rt2x00usb_register_read(rt2x00dev, CWMAX_CSR, ®);
|
|
rt2x00_set_field32(®, field, queue->cw_max);
|
|
rt2x00usb_register_write(rt2x00dev, CWMAX_CSR, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
/*
|
|
* Mac80211 demands get_tsf must be atomic.
|
|
* This is not possible for rt73usb since all register access
|
|
* functions require sleeping. Untill mac80211 no longer needs
|
|
* get_tsf to be atomic, this function should be disabled.
|
|
*/
|
|
static u64 rt73usb_get_tsf(struct ieee80211_hw *hw)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
u64 tsf;
|
|
u32 reg;
|
|
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR13, ®);
|
|
tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
|
|
rt2x00usb_register_read(rt2x00dev, TXRX_CSR12, ®);
|
|
tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
|
|
|
|
return tsf;
|
|
}
|
|
#else
|
|
#define rt73usb_get_tsf NULL
|
|
#endif
|
|
|
|
static const struct ieee80211_ops rt73usb_mac80211_ops = {
|
|
.tx = rt2x00mac_tx,
|
|
.start = rt2x00mac_start,
|
|
.stop = rt2x00mac_stop,
|
|
.add_interface = rt2x00mac_add_interface,
|
|
.remove_interface = rt2x00mac_remove_interface,
|
|
.config = rt2x00mac_config,
|
|
.config_interface = rt2x00mac_config_interface,
|
|
.configure_filter = rt2x00mac_configure_filter,
|
|
.set_key = rt2x00mac_set_key,
|
|
.get_stats = rt2x00mac_get_stats,
|
|
.bss_info_changed = rt2x00mac_bss_info_changed,
|
|
.conf_tx = rt73usb_conf_tx,
|
|
.get_tx_stats = rt2x00mac_get_tx_stats,
|
|
.get_tsf = rt73usb_get_tsf,
|
|
};
|
|
|
|
static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
|
|
.probe_hw = rt73usb_probe_hw,
|
|
.get_firmware_name = rt73usb_get_firmware_name,
|
|
.get_firmware_crc = rt73usb_get_firmware_crc,
|
|
.load_firmware = rt73usb_load_firmware,
|
|
.initialize = rt2x00usb_initialize,
|
|
.uninitialize = rt2x00usb_uninitialize,
|
|
.clear_entry = rt2x00usb_clear_entry,
|
|
.set_device_state = rt73usb_set_device_state,
|
|
.link_stats = rt73usb_link_stats,
|
|
.reset_tuner = rt73usb_reset_tuner,
|
|
.link_tuner = rt73usb_link_tuner,
|
|
.write_tx_desc = rt73usb_write_tx_desc,
|
|
.write_tx_data = rt2x00usb_write_tx_data,
|
|
.write_beacon = rt73usb_write_beacon,
|
|
.get_tx_data_len = rt73usb_get_tx_data_len,
|
|
.kick_tx_queue = rt73usb_kick_tx_queue,
|
|
.fill_rxdone = rt73usb_fill_rxdone,
|
|
.config_shared_key = rt73usb_config_shared_key,
|
|
.config_pairwise_key = rt73usb_config_pairwise_key,
|
|
.config_filter = rt73usb_config_filter,
|
|
.config_intf = rt73usb_config_intf,
|
|
.config_erp = rt73usb_config_erp,
|
|
.config_ant = rt73usb_config_ant,
|
|
.config = rt73usb_config,
|
|
};
|
|
|
|
static const struct data_queue_desc rt73usb_queue_rx = {
|
|
.entry_num = RX_ENTRIES,
|
|
.data_size = DATA_FRAME_SIZE,
|
|
.desc_size = RXD_DESC_SIZE,
|
|
.priv_size = sizeof(struct queue_entry_priv_usb),
|
|
};
|
|
|
|
static const struct data_queue_desc rt73usb_queue_tx = {
|
|
.entry_num = TX_ENTRIES,
|
|
.data_size = DATA_FRAME_SIZE,
|
|
.desc_size = TXD_DESC_SIZE,
|
|
.priv_size = sizeof(struct queue_entry_priv_usb),
|
|
};
|
|
|
|
static const struct data_queue_desc rt73usb_queue_bcn = {
|
|
.entry_num = 4 * BEACON_ENTRIES,
|
|
.data_size = MGMT_FRAME_SIZE,
|
|
.desc_size = TXINFO_SIZE,
|
|
.priv_size = sizeof(struct queue_entry_priv_usb),
|
|
};
|
|
|
|
static const struct rt2x00_ops rt73usb_ops = {
|
|
.name = KBUILD_MODNAME,
|
|
.max_sta_intf = 1,
|
|
.max_ap_intf = 4,
|
|
.eeprom_size = EEPROM_SIZE,
|
|
.rf_size = RF_SIZE,
|
|
.tx_queues = NUM_TX_QUEUES,
|
|
.rx = &rt73usb_queue_rx,
|
|
.tx = &rt73usb_queue_tx,
|
|
.bcn = &rt73usb_queue_bcn,
|
|
.lib = &rt73usb_rt2x00_ops,
|
|
.hw = &rt73usb_mac80211_ops,
|
|
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
|
|
.debugfs = &rt73usb_rt2x00debug,
|
|
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
|
|
};
|
|
|
|
/*
|
|
* rt73usb module information.
|
|
*/
|
|
static struct usb_device_id rt73usb_device_table[] = {
|
|
/* AboCom */
|
|
{ USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Askey */
|
|
{ USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* ASUS */
|
|
{ USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Belkin */
|
|
{ USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Billionton */
|
|
{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Buffalo */
|
|
{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* CNet */
|
|
{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Conceptronic */
|
|
{ USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Corega */
|
|
{ USB_DEVICE(0x07aa, 0x002e), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* D-Link */
|
|
{ USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Gemtek */
|
|
{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Gigabyte */
|
|
{ USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Huawei-3Com */
|
|
{ USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Hercules */
|
|
{ USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Linksys */
|
|
{ USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* MSI */
|
|
{ USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Ralink */
|
|
{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Qcom */
|
|
{ USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Senao */
|
|
{ USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Sitecom */
|
|
{ USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Surecom */
|
|
{ USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
/* Planex */
|
|
{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_AUTHOR(DRV_PROJECT);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver.");
|
|
MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards");
|
|
MODULE_DEVICE_TABLE(usb, rt73usb_device_table);
|
|
MODULE_FIRMWARE(FIRMWARE_RT2571);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct usb_driver rt73usb_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = rt73usb_device_table,
|
|
.probe = rt2x00usb_probe,
|
|
.disconnect = rt2x00usb_disconnect,
|
|
.suspend = rt2x00usb_suspend,
|
|
.resume = rt2x00usb_resume,
|
|
};
|
|
|
|
static int __init rt73usb_init(void)
|
|
{
|
|
return usb_register(&rt73usb_driver);
|
|
}
|
|
|
|
static void __exit rt73usb_exit(void)
|
|
{
|
|
usb_deregister(&rt73usb_driver);
|
|
}
|
|
|
|
module_init(rt73usb_init);
|
|
module_exit(rt73usb_exit);
|