AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
7b052214e5
linux_dsm_epyc7002/drivers/net/wireless/ti/wl18xx/main.c
Igal Chernobelsky 7b052214e5 wlcore: modify bss loss parameters 
Modify default parameters to reduce firmware BSS lose
probability in congested environment.

[Applied to 18xx configuration as well - Arik]

Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 17:16:08 +03:00

1284 lines
40 KiB
C
Raw Blame History

/*
* This file is part of wl18xx
*
* Copyright (C) 2011 Texas Instruments
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/ip.h>
#include "../wlcore/wlcore.h"
#include "../wlcore/debug.h"
#include "../wlcore/io.h"
#include "../wlcore/acx.h"
#include "../wlcore/tx.h"
#include "../wlcore/rx.h"
#include "../wlcore/io.h"
#include "../wlcore/boot.h"
#include "reg.h"
#include "conf.h"
#include "acx.h"
#include "tx.h"
#include "wl18xx.h"
#include "io.h"
#include "debugfs.h"
#define WL18XX_RX_CHECKSUM_MASK 0x40
static char *ht_mode_param = "wide";
static char *board_type_param = "hdk";
static bool dc2dc_param = false;
static int n_antennas_2_param = 1;
static int n_antennas_5_param = 1;
static bool checksum_param = false;
static bool enable_11a_param = true;
static int low_band_component = -1;
static int low_band_component_type = -1;
static int high_band_component = -1;
static int high_band_component_type = -1;
static int pwr_limit_reference_11_abg = -1;
static const u8 wl18xx_rate_to_idx_2ghz[] = {
/* MCS rates are used only with 11n */
15, /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */
14, /* WL18XX_CONF_HW_RXTX_RATE_MCS14 */
13, /* WL18XX_CONF_HW_RXTX_RATE_MCS13 */
12, /* WL18XX_CONF_HW_RXTX_RATE_MCS12 */
11, /* WL18XX_CONF_HW_RXTX_RATE_MCS11 */
10, /* WL18XX_CONF_HW_RXTX_RATE_MCS10 */
9, /* WL18XX_CONF_HW_RXTX_RATE_MCS9 */
8, /* WL18XX_CONF_HW_RXTX_RATE_MCS8 */
7, /* WL18XX_CONF_HW_RXTX_RATE_MCS7 */
6, /* WL18XX_CONF_HW_RXTX_RATE_MCS6 */
5, /* WL18XX_CONF_HW_RXTX_RATE_MCS5 */
4, /* WL18XX_CONF_HW_RXTX_RATE_MCS4 */
3, /* WL18XX_CONF_HW_RXTX_RATE_MCS3 */
2, /* WL18XX_CONF_HW_RXTX_RATE_MCS2 */
1, /* WL18XX_CONF_HW_RXTX_RATE_MCS1 */
0, /* WL18XX_CONF_HW_RXTX_RATE_MCS0 */
11, /* WL18XX_CONF_HW_RXTX_RATE_54 */
10, /* WL18XX_CONF_HW_RXTX_RATE_48 */
9, /* WL18XX_CONF_HW_RXTX_RATE_36 */
8, /* WL18XX_CONF_HW_RXTX_RATE_24 */
/* TI-specific rate */
CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_22 */
7, /* WL18XX_CONF_HW_RXTX_RATE_18 */
6, /* WL18XX_CONF_HW_RXTX_RATE_12 */
3, /* WL18XX_CONF_HW_RXTX_RATE_11 */
5, /* WL18XX_CONF_HW_RXTX_RATE_9 */
4, /* WL18XX_CONF_HW_RXTX_RATE_6 */
2, /* WL18XX_CONF_HW_RXTX_RATE_5_5 */
1, /* WL18XX_CONF_HW_RXTX_RATE_2 */
0 /* WL18XX_CONF_HW_RXTX_RATE_1 */
};
static const u8 wl18xx_rate_to_idx_5ghz[] = {
/* MCS rates are used only with 11n */
15, /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */
14, /* WL18XX_CONF_HW_RXTX_RATE_MCS14 */
13, /* WL18XX_CONF_HW_RXTX_RATE_MCS13 */
12, /* WL18XX_CONF_HW_RXTX_RATE_MCS12 */
11, /* WL18XX_CONF_HW_RXTX_RATE_MCS11 */
10, /* WL18XX_CONF_HW_RXTX_RATE_MCS10 */
9, /* WL18XX_CONF_HW_RXTX_RATE_MCS9 */
8, /* WL18XX_CONF_HW_RXTX_RATE_MCS8 */
7, /* WL18XX_CONF_HW_RXTX_RATE_MCS7 */
6, /* WL18XX_CONF_HW_RXTX_RATE_MCS6 */
5, /* WL18XX_CONF_HW_RXTX_RATE_MCS5 */
4, /* WL18XX_CONF_HW_RXTX_RATE_MCS4 */
3, /* WL18XX_CONF_HW_RXTX_RATE_MCS3 */
2, /* WL18XX_CONF_HW_RXTX_RATE_MCS2 */
1, /* WL18XX_CONF_HW_RXTX_RATE_MCS1 */
0, /* WL18XX_CONF_HW_RXTX_RATE_MCS0 */
7, /* WL18XX_CONF_HW_RXTX_RATE_54 */
6, /* WL18XX_CONF_HW_RXTX_RATE_48 */
5, /* WL18XX_CONF_HW_RXTX_RATE_36 */
4, /* WL18XX_CONF_HW_RXTX_RATE_24 */
/* TI-specific rate */
CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_22 */
3, /* WL18XX_CONF_HW_RXTX_RATE_18 */
2, /* WL18XX_CONF_HW_RXTX_RATE_12 */
CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_11 */
1, /* WL18XX_CONF_HW_RXTX_RATE_9 */
0, /* WL18XX_CONF_HW_RXTX_RATE_6 */
CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_5_5 */
CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_2 */
CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_1 */
};
static const u8 *wl18xx_band_rate_to_idx[] = {
[IEEE80211_BAND_2GHZ] = wl18xx_rate_to_idx_2ghz,
[IEEE80211_BAND_5GHZ] = wl18xx_rate_to_idx_5ghz
};
enum wl18xx_hw_rates {
WL18XX_CONF_HW_RXTX_RATE_MCS15 = 0,
WL18XX_CONF_HW_RXTX_RATE_MCS14,
WL18XX_CONF_HW_RXTX_RATE_MCS13,
WL18XX_CONF_HW_RXTX_RATE_MCS12,
WL18XX_CONF_HW_RXTX_RATE_MCS11,
WL18XX_CONF_HW_RXTX_RATE_MCS10,
WL18XX_CONF_HW_RXTX_RATE_MCS9,
WL18XX_CONF_HW_RXTX_RATE_MCS8,
WL18XX_CONF_HW_RXTX_RATE_MCS7,
WL18XX_CONF_HW_RXTX_RATE_MCS6,
WL18XX_CONF_HW_RXTX_RATE_MCS5,
WL18XX_CONF_HW_RXTX_RATE_MCS4,
WL18XX_CONF_HW_RXTX_RATE_MCS3,
WL18XX_CONF_HW_RXTX_RATE_MCS2,
WL18XX_CONF_HW_RXTX_RATE_MCS1,
WL18XX_CONF_HW_RXTX_RATE_MCS0,
WL18XX_CONF_HW_RXTX_RATE_54,
WL18XX_CONF_HW_RXTX_RATE_48,
WL18XX_CONF_HW_RXTX_RATE_36,
WL18XX_CONF_HW_RXTX_RATE_24,
WL18XX_CONF_HW_RXTX_RATE_22,
WL18XX_CONF_HW_RXTX_RATE_18,
WL18XX_CONF_HW_RXTX_RATE_12,
WL18XX_CONF_HW_RXTX_RATE_11,
WL18XX_CONF_HW_RXTX_RATE_9,
WL18XX_CONF_HW_RXTX_RATE_6,
WL18XX_CONF_HW_RXTX_RATE_5_5,
WL18XX_CONF_HW_RXTX_RATE_2,
WL18XX_CONF_HW_RXTX_RATE_1,
WL18XX_CONF_HW_RXTX_RATE_MAX,
};
static struct wlcore_conf wl18xx_conf = {
.sg = {
.params = {
[CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
[CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
[CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
[CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
[CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
[CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
[CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
[CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
[CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
[CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
[CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
[CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
[CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
[CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
[CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
[CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
[CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
[CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
/* active scan params */
[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
/* passive scan params */
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
/* passive scan in dual antenna params */
[CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
[CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
[CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
/* general params */
[CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
[CONF_SG_ANTENNA_CONFIGURATION] = 0,
[CONF_SG_BEACON_MISS_PERCENT] = 60,
[CONF_SG_DHCP_TIME] = 5000,
[CONF_SG_RXT] = 1200,
[CONF_SG_TXT] = 1000,
[CONF_SG_ADAPTIVE_RXT_TXT] = 1,
[CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
[CONF_SG_HV3_MAX_SERVED] = 6,
[CONF_SG_PS_POLL_TIMEOUT] = 10,
[CONF_SG_UPSD_TIMEOUT] = 10,
[CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
[CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
[CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
/* AP params */
[CONF_AP_BEACON_MISS_TX] = 3,
[CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
[CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
[CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
[CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
[CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
/* CTS Diluting params */
[CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
[CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
},
.state = CONF_SG_PROTECTIVE,
},
.rx = {
.rx_msdu_life_time = 512000,
.packet_detection_threshold = 0,
.ps_poll_timeout = 15,
.upsd_timeout = 15,
.rts_threshold = IEEE80211_MAX_RTS_THRESHOLD,
.rx_cca_threshold = 0,
.irq_blk_threshold = 0xFFFF,
.irq_pkt_threshold = 0,
.irq_timeout = 600,
.queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY,
},
.tx = {
.tx_energy_detection = 0,
.sta_rc_conf = {
.enabled_rates = 0,
.short_retry_limit = 10,
.long_retry_limit = 10,
.aflags = 0,
},
.ac_conf_count = 4,
.ac_conf = {
[CONF_TX_AC_BE] = {
.ac = CONF_TX_AC_BE,
.cw_min = 15,
.cw_max = 63,
.aifsn = 3,
.tx_op_limit = 0,
},
[CONF_TX_AC_BK] = {
.ac = CONF_TX_AC_BK,
.cw_min = 15,
.cw_max = 63,
.aifsn = 7,
.tx_op_limit = 0,
},
[CONF_TX_AC_VI] = {
.ac = CONF_TX_AC_VI,
.cw_min = 15,
.cw_max = 63,
.aifsn = CONF_TX_AIFS_PIFS,
.tx_op_limit = 3008,
},
[CONF_TX_AC_VO] = {
.ac = CONF_TX_AC_VO,
.cw_min = 15,
.cw_max = 63,
.aifsn = CONF_TX_AIFS_PIFS,
.tx_op_limit = 1504,
},
},
.max_tx_retries = 100,
.ap_aging_period = 300,
.tid_conf_count = 4,
.tid_conf = {
[CONF_TX_AC_BE] = {
.queue_id = CONF_TX_AC_BE,
.channel_type = CONF_CHANNEL_TYPE_EDCF,
.tsid = CONF_TX_AC_BE,
.ps_scheme = CONF_PS_SCHEME_LEGACY,
.ack_policy = CONF_ACK_POLICY_LEGACY,
.apsd_conf = {0, 0},
},
[CONF_TX_AC_BK] = {
.queue_id = CONF_TX_AC_BK,
.channel_type = CONF_CHANNEL_TYPE_EDCF,
.tsid = CONF_TX_AC_BK,
.ps_scheme = CONF_PS_SCHEME_LEGACY,
.ack_policy = CONF_ACK_POLICY_LEGACY,
.apsd_conf = {0, 0},
},
[CONF_TX_AC_VI] = {
.queue_id = CONF_TX_AC_VI,
.channel_type = CONF_CHANNEL_TYPE_EDCF,
.tsid = CONF_TX_AC_VI,
.ps_scheme = CONF_PS_SCHEME_LEGACY,
.ack_policy = CONF_ACK_POLICY_LEGACY,
.apsd_conf = {0, 0},
},
[CONF_TX_AC_VO] = {
.queue_id = CONF_TX_AC_VO,
.channel_type = CONF_CHANNEL_TYPE_EDCF,
.tsid = CONF_TX_AC_VO,
.ps_scheme = CONF_PS_SCHEME_LEGACY,
.ack_policy = CONF_ACK_POLICY_LEGACY,
.apsd_conf = {0, 0},
},
},
.frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD,
.tx_compl_timeout = 350,
.tx_compl_threshold = 10,
.basic_rate = CONF_HW_BIT_RATE_1MBPS,
.basic_rate_5 = CONF_HW_BIT_RATE_6MBPS,
.tmpl_short_retry_limit = 10,
.tmpl_long_retry_limit = 10,
.tx_watchdog_timeout = 5000,
},
.conn = {
.wake_up_event = CONF_WAKE_UP_EVENT_DTIM,
.listen_interval = 1,
.suspend_wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM,
.suspend_listen_interval = 3,
.bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED,
.bcn_filt_ie_count = 2,
.bcn_filt_ie = {
[0] = {
.ie = WLAN_EID_CHANNEL_SWITCH,
.rule = CONF_BCN_RULE_PASS_ON_APPEARANCE,
},
[1] = {
.ie = WLAN_EID_HT_OPERATION,
.rule = CONF_BCN_RULE_PASS_ON_CHANGE,
},
},
.synch_fail_thold = 12,
.bss_lose_timeout = 400,
.beacon_rx_timeout = 10000,
.broadcast_timeout = 20000,
.rx_broadcast_in_ps = 1,
.ps_poll_threshold = 10,
.bet_enable = CONF_BET_MODE_ENABLE,
.bet_max_consecutive = 50,
.psm_entry_retries = 8,
.psm_exit_retries = 16,
.psm_entry_nullfunc_retries = 3,
.dynamic_ps_timeout = 200,
.forced_ps = false,
.keep_alive_interval = 55000,
.max_listen_interval = 20,
},
.itrim = {
.enable = false,
.timeout = 50000,
},
.pm_config = {
.host_clk_settling_time = 5000,
.host_fast_wakeup_support = false
},
.roam_trigger = {
.trigger_pacing = 1,
.avg_weight_rssi_beacon = 20,
.avg_weight_rssi_data = 10,
.avg_weight_snr_beacon = 20,
.avg_weight_snr_data = 10,
},
.scan = {
.min_dwell_time_active = 7500,
.max_dwell_time_active = 30000,
.min_dwell_time_passive = 100000,
.max_dwell_time_passive = 100000,
.num_probe_reqs = 2,
.split_scan_timeout = 50000,
},
.sched_scan = {
/*
* Values are in TU/1000 but since sched scan FW command
* params are in TUs rounding up may occur.
*/
.base_dwell_time = 7500,
.max_dwell_time_delta = 22500,
/* based on 250bits per probe @1Mbps */
.dwell_time_delta_per_probe = 2000,
/* based on 250bits per probe @6Mbps (plus a bit more) */
.dwell_time_delta_per_probe_5 = 350,
.dwell_time_passive = 100000,
.dwell_time_dfs = 150000,
.num_probe_reqs = 2,
.rssi_threshold = -90,
.snr_threshold = 0,
},
.ht = {
.rx_ba_win_size = 10,
.tx_ba_win_size = 64,
.inactivity_timeout = 10000,
.tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP,
},
.mem = {
.num_stations = 1,
.ssid_profiles = 1,
.rx_block_num = 40,
.tx_min_block_num = 40,
.dynamic_memory = 1,
.min_req_tx_blocks = 45,
.min_req_rx_blocks = 22,
.tx_min = 27,
},
.fm_coex = {
.enable = true,
.swallow_period = 5,
.n_divider_fref_set_1 = 0xff, /* default */
.n_divider_fref_set_2 = 12,
.m_divider_fref_set_1 = 148,
.m_divider_fref_set_2 = 0xffff, /* default */
.coex_pll_stabilization_time = 0xffffffff, /* default */
.ldo_stabilization_time = 0xffff, /* default */
.fm_disturbed_band_margin = 0xff, /* default */
.swallow_clk_diff = 0xff, /* default */
},
.rx_streaming = {
.duration = 150,
.queues = 0x1,
.interval = 20,
.always = 0,
},
.fwlog = {
.mode = WL12XX_FWLOG_ON_DEMAND,
.mem_blocks = 2,
.severity = 0,
.timestamp = WL12XX_FWLOG_TIMESTAMP_DISABLED,
.output = WL12XX_FWLOG_OUTPUT_HOST,
.threshold = 0,
},
.rate = {
.rate_retry_score = 32000,
.per_add = 8192,
.per_th1 = 2048,
.per_th2 = 4096,
.max_per = 8100,
.inverse_curiosity_factor = 5,
.tx_fail_low_th = 4,
.tx_fail_high_th = 10,
.per_alpha_shift = 4,
.per_add_shift = 13,
.per_beta1_shift = 10,
.per_beta2_shift = 8,
.rate_check_up = 2,
.rate_check_down = 12,
.rate_retry_policy = {
0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00,
},
},
.hangover = {
.recover_time = 0,
.hangover_period = 20,
.dynamic_mode = 1,
.early_termination_mode = 1,
.max_period = 20,
.min_period = 1,
.increase_delta = 1,
.decrease_delta = 2,
.quiet_time = 4,
.increase_time = 1,
.window_size = 16,
},
};
static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
.phy = {
.phy_standalone = 0x00,
.primary_clock_setting_time = 0x05,
.clock_valid_on_wake_up = 0x00,
.secondary_clock_setting_time = 0x05,
.rdl = 0x01,
.auto_detect = 0x00,
.dedicated_fem = FEM_NONE,
.low_band_component = COMPONENT_2_WAY_SWITCH,
.low_band_component_type = 0x05,
.high_band_component = COMPONENT_2_WAY_SWITCH,
.high_band_component_type = 0x09,
.tcxo_ldo_voltage = 0x00,
.xtal_itrim_val = 0x04,
.srf_state = 0x00,
.io_configuration = 0x01,
.sdio_configuration = 0x00,
.settings = 0x00,
.enable_clpc = 0x00,
.enable_tx_low_pwr_on_siso_rdl = 0x00,
.rx_profile = 0x00,
.pwr_limit_reference_11_abg = 0xc8,
},
};
static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = {
[PART_TOP_PRCM_ELP_SOC] = {
.mem = { .start = 0x00A02000, .size = 0x00010000 },
.reg = { .start = 0x00807000, .size = 0x00005000 },
.mem2 = { .start = 0x00800000, .size = 0x0000B000 },
.mem3 = { .start = 0x00000000, .size = 0x00000000 },
},
[PART_DOWN] = {
.mem = { .start = 0x00000000, .size = 0x00014000 },
.reg = { .start = 0x00810000, .size = 0x0000BFFF },
.mem2 = { .start = 0x00000000, .size = 0x00000000 },
.mem3 = { .start = 0x00000000, .size = 0x00000000 },
},
[PART_BOOT] = {
.mem = { .start = 0x00700000, .size = 0x0000030c },
.reg = { .start = 0x00802000, .size = 0x00014578 },
.mem2 = { .start = 0x00B00404, .size = 0x00001000 },
.mem3 = { .start = 0x00C00000, .size = 0x00000400 },
},
[PART_WORK] = {
.mem = { .start = 0x00800000, .size = 0x000050FC },
.reg = { .start = 0x00B00404, .size = 0x00001000 },
.mem2 = { .start = 0x00C00000, .size = 0x00000400 },
.mem3 = { .start = 0x00000000, .size = 0x00000000 },
},
[PART_PHY_INIT] = {
/* TODO: use the phy_conf struct size here */
.mem = { .start = 0x80926000, .size = 252 },
.reg = { .start = 0x00000000, .size = 0x00000000 },
.mem2 = { .start = 0x00000000, .size = 0x00000000 },
.mem3 = { .start = 0x00000000, .size = 0x00000000 },
},
};
static const int wl18xx_rtable[REG_TABLE_LEN] = {
[REG_ECPU_CONTROL] = WL18XX_REG_ECPU_CONTROL,
[REG_INTERRUPT_NO_CLEAR] = WL18XX_REG_INTERRUPT_NO_CLEAR,
[REG_INTERRUPT_ACK] = WL18XX_REG_INTERRUPT_ACK,
[REG_COMMAND_MAILBOX_PTR] = WL18XX_REG_COMMAND_MAILBOX_PTR,
[REG_EVENT_MAILBOX_PTR] = WL18XX_REG_EVENT_MAILBOX_PTR,
[REG_INTERRUPT_TRIG] = WL18XX_REG_INTERRUPT_TRIG_H,
[REG_INTERRUPT_MASK] = WL18XX_REG_INTERRUPT_MASK,
[REG_PC_ON_RECOVERY] = WL18XX_SCR_PAD4,
[REG_CHIP_ID_B] = WL18XX_REG_CHIP_ID_B,
[REG_CMD_MBOX_ADDRESS] = WL18XX_CMD_MBOX_ADDRESS,
/* data access memory addresses, used with partition translation */
[REG_SLV_MEM_DATA] = WL18XX_SLV_MEM_DATA,
[REG_SLV_REG_DATA] = WL18XX_SLV_REG_DATA,
/* raw data access memory addresses */
[REG_RAW_FW_STATUS_ADDR] = WL18XX_FW_STATUS_ADDR,
};
static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = {
[CLOCK_CONFIG_16_2_M] = { 7, 104, 801, 4, true },
[CLOCK_CONFIG_16_368_M] = { 9, 132, 3751, 4, true },
[CLOCK_CONFIG_16_8_M] = { 7, 100, 0, 0, false },
[CLOCK_CONFIG_19_2_M] = { 8, 100, 0, 0, false },
[CLOCK_CONFIG_26_M] = { 13, 120, 0, 0, false },
[CLOCK_CONFIG_32_736_M] = { 9, 132, 3751, 4, true },
[CLOCK_CONFIG_33_6_M] = { 7, 100, 0, 0, false },
[CLOCK_CONFIG_38_468_M] = { 8, 100, 0, 0, false },
[CLOCK_CONFIG_52_M] = { 13, 120, 0, 0, false },
};
/* TODO: maybe move to a new header file? */
#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw.bin"
static int wl18xx_identify_chip(struct wl1271 *wl)
{
int ret = 0;
switch (wl->chip.id) {
case CHIP_ID_185x_PG10:
wl1271_debug(DEBUG_BOOT, "chip id 0x%x (185x PG10)",
wl->chip.id);
wl->sr_fw_name = WL18XX_FW_NAME;
/* wl18xx uses the same firmware for PLT */
wl->plt_fw_name = WL18XX_FW_NAME;
wl->quirks |= WLCORE_QUIRK_NO_ELP |
WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED |
WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN |
WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN;
/* PG 1.0 has some problems with MCS_13, so disable it */
wl->ht_cap.mcs.rx_mask[1] &= ~BIT(5);
/* TODO: need to blocksize alignment for RX/TX separately? */
break;
default:
wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
ret = -ENODEV;
goto out;
}
out:
return ret;
}
static void wl18xx_set_clk(struct wl1271 *wl)
{
u32 clk_freq;
wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
/* TODO: PG2: apparently we need to read the clk type */
clk_freq = wl18xx_top_reg_read(wl, PRIMARY_CLK_DETECT);
wl1271_debug(DEBUG_BOOT, "clock freq %d (%d, %d, %d, %d, %s)", clk_freq,
wl18xx_clk_table[clk_freq].n, wl18xx_clk_table[clk_freq].m,
wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q,
wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit");
wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N, wl18xx_clk_table[clk_freq].n);
wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_M, wl18xx_clk_table[clk_freq].m);
if (wl18xx_clk_table[clk_freq].swallow) {
/* first the 16 lower bits */
wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_1,
wl18xx_clk_table[clk_freq].q &
PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK);
/* then the 16 higher bits, masked out */
wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_2,
(wl18xx_clk_table[clk_freq].q >> 16) &
PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK);
/* first the 16 lower bits */
wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_1,
wl18xx_clk_table[clk_freq].p &
PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK);
/* then the 16 higher bits, masked out */
wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_2,
(wl18xx_clk_table[clk_freq].p >> 16) &
PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK);
} else {
wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_SWALLOW_EN,
PLLSH_WCS_PLL_SWALLOW_EN_VAL2);
}
}
static void wl18xx_boot_soft_reset(struct wl1271 *wl)
{
/* disable Rx/Tx */
wl1271_write32(wl, WL18XX_ENABLE, 0x0);
/* disable auto calibration on start*/
wl1271_write32(wl, WL18XX_SPARE_A2, 0xffff);
}
static int wl18xx_pre_boot(struct wl1271 *wl)
{
wl18xx_set_clk(wl);
/* Continue the ELP wake up sequence */
wl1271_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
udelay(500);
wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
/* Disable interrupts */
wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
wl18xx_boot_soft_reset(wl);
return 0;
}
static void wl18xx_pre_upload(struct wl1271 *wl)
{
u32 tmp;
wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
/* TODO: check if this is all needed */
wl1271_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND);
tmp = wlcore_read_reg(wl, REG_CHIP_ID_B);
wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
tmp = wl1271_read32(wl, WL18XX_SCR_PAD2);
}
static void wl18xx_set_mac_and_phy(struct wl1271 *wl)
{
struct wl18xx_priv *priv = wl->priv;
struct wl18xx_conf_phy *phy = &priv->conf.phy;
struct wl18xx_mac_and_phy_params params;
memset(&params, 0, sizeof(params));
params.phy_standalone = phy->phy_standalone;
params.rdl = phy->rdl;
params.enable_clpc = phy->enable_clpc;
params.enable_tx_low_pwr_on_siso_rdl =
phy->enable_tx_low_pwr_on_siso_rdl;
params.auto_detect = phy->auto_detect;
params.dedicated_fem = phy->dedicated_fem;
params.low_band_component = phy->low_band_component;
params.low_band_component_type =
phy->low_band_component_type;
params.high_band_component = phy->high_band_component;
params.high_band_component_type =
phy->high_band_component_type;
params.number_of_assembled_ant2_4 =
n_antennas_2_param;
params.number_of_assembled_ant5 =
n_antennas_5_param;
params.external_pa_dc2dc = dc2dc_param;
params.tcxo_ldo_voltage = phy->tcxo_ldo_voltage;
params.xtal_itrim_val = phy->xtal_itrim_val;
params.srf_state = phy->srf_state;
params.io_configuration = phy->io_configuration;
params.sdio_configuration = phy->sdio_configuration;
params.settings = phy->settings;
params.rx_profile = phy->rx_profile;
params.primary_clock_setting_time =
phy->primary_clock_setting_time;
params.clock_valid_on_wake_up =
phy->clock_valid_on_wake_up;
params.secondary_clock_setting_time =
phy->secondary_clock_setting_time;
params.pwr_limit_reference_11_abg =
phy->pwr_limit_reference_11_abg;
params.board_type = priv->board_type;
wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
wl1271_write(wl, WL18XX_PHY_INIT_MEM_ADDR, (u8 *)&params,
sizeof(params), false);
}
static void wl18xx_enable_interrupts(struct wl1271 *wl)
{
wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_ALL_EVENTS_VECTOR);
wlcore_enable_interrupts(wl);
wlcore_write_reg(wl, REG_INTERRUPT_MASK,
WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
}
static int wl18xx_boot(struct wl1271 *wl)
{
int ret;
ret = wl18xx_pre_boot(wl);
if (ret < 0)
goto out;
wl18xx_pre_upload(wl);
ret = wlcore_boot_upload_firmware(wl);
if (ret < 0)
goto out;
wl18xx_set_mac_and_phy(wl);
ret = wlcore_boot_run_firmware(wl);
if (ret < 0)
goto out;
wl18xx_enable_interrupts(wl);
out:
return ret;
}
static void wl18xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
void *buf, size_t len)
{
struct wl18xx_priv *priv = wl->priv;
memcpy(priv->cmd_buf, buf, len);
memset(priv->cmd_buf + len, 0, WL18XX_CMD_MAX_SIZE - len);
wl1271_write(wl, cmd_box_addr, priv->cmd_buf, WL18XX_CMD_MAX_SIZE,
false);
}
static void wl18xx_ack_event(struct wl1271 *wl)
{
wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL18XX_INTR_TRIG_EVENT_ACK);
}
static u32 wl18xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks)
{
u32 blk_size = WL18XX_TX_HW_BLOCK_SIZE;
return (len + blk_size - 1) / blk_size + spare_blks;
}
static void
wl18xx_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc,
u32 blks, u32 spare_blks)
{
desc->wl18xx_mem.total_mem_blocks = blks;
desc->wl18xx_mem.reserved = 0;
}
static void
wl18xx_set_tx_desc_data_len(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc,
struct sk_buff *skb)
{
desc->length = cpu_to_le16(skb->len);
wl1271_debug(DEBUG_TX, "tx_fill_hdr: hlid: %d "
"len: %d life: %d mem: %d", desc->hlid,
le16_to_cpu(desc->length),
le16_to_cpu(desc->life_time),
desc->wl18xx_mem.total_mem_blocks);
}
static enum wl_rx_buf_align
wl18xx_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc)
{
if (rx_desc & RX_BUF_PADDED_PAYLOAD)
return WLCORE_RX_BUF_PADDED;
return WLCORE_RX_BUF_ALIGNED;
}
static u32 wl18xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data,
u32 data_len)
{
struct wl1271_rx_descriptor *desc = rx_data;
/* invalid packet */
if (data_len < sizeof(*desc))
return 0;
return data_len - sizeof(*desc);
}
static void wl18xx_tx_immediate_completion(struct wl1271 *wl)
{
wl18xx_tx_immediate_complete(wl);
}
static int wl18xx_hw_init(struct wl1271 *wl)
{
int ret;
struct wl18xx_priv *priv = wl->priv;
u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE |
HOST_IF_CFG_ADD_RX_ALIGNMENT;
u32 sdio_align_size = 0;
/* (re)init private structures. Relevant on recovery as well. */
priv->last_fw_rls_idx = 0;
/* Enable Tx SDIO padding */
if (wl->quirks & WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN) {
host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
sdio_align_size = WL12XX_BUS_BLOCK_SIZE;
}
/* Enable Rx SDIO padding */
if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN) {
host_cfg_bitmap |= HOST_IF_CFG_RX_PAD_TO_SDIO_BLK;
sdio_align_size = WL12XX_BUS_BLOCK_SIZE;
}
ret = wl18xx_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap,
sdio_align_size,
WL18XX_TX_HW_BLOCK_SPARE,
WL18XX_HOST_IF_LEN_SIZE_FIELD);
if (ret < 0)
return ret;
if (checksum_param) {
ret = wl18xx_acx_set_checksum_state(wl);
if (ret != 0)
return ret;
}
return ret;
}
static void wl18xx_set_tx_desc_csum(struct wl1271 *wl,
struct wl1271_tx_hw_descr *desc,
struct sk_buff *skb)
{
u32 ip_hdr_offset;
struct iphdr *ip_hdr;
if (!checksum_param) {
desc->wl18xx_checksum_data = 0;
return;
}
if (skb->ip_summed != CHECKSUM_PARTIAL) {
desc->wl18xx_checksum_data = 0;
return;
}
ip_hdr_offset = skb_network_header(skb) - skb_mac_header(skb);
if (WARN_ON(ip_hdr_offset >= (1<<7))) {
desc->wl18xx_checksum_data = 0;
return;
}
desc->wl18xx_checksum_data = ip_hdr_offset << 1;
/* FW is interested only in the LSB of the protocol TCP=0 UDP=1 */
ip_hdr = (void *)skb_network_header(skb);
desc->wl18xx_checksum_data |= (ip_hdr->protocol & 0x01);
}
static void wl18xx_set_rx_csum(struct wl1271 *wl,
struct wl1271_rx_descriptor *desc,
struct sk_buff *skb)
{
if (desc->status & WL18XX_RX_CHECKSUM_MASK)
skb->ip_summed = CHECKSUM_UNNECESSARY;
}
/*
* TODO: instead of having these two functions to get the rate mask,
* we should modify the wlvif->rate_set instead
*/
static u32 wl18xx_sta_get_ap_rate_mask(struct wl1271 *wl,
struct wl12xx_vif *wlvif)
{
u32 hw_rate_set = wlvif->rate_set;
if (wlvif->channel_type == NL80211_CHAN_HT40MINUS ||
wlvif->channel_type == NL80211_CHAN_HT40PLUS) {
wl1271_debug(DEBUG_ACX, "using wide channel rate mask");
hw_rate_set |= CONF_TX_RATE_USE_WIDE_CHAN;
/* we don't support MIMO in wide-channel mode */
hw_rate_set &= ~CONF_TX_MIMO_RATES;
}
return hw_rate_set;
}
static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl,
struct wl12xx_vif *wlvif)
{
if ((wlvif->channel_type == NL80211_CHAN_HT40MINUS ||
wlvif->channel_type == NL80211_CHAN_HT40PLUS) &&
!strcmp(ht_mode_param, "wide")) {
wl1271_debug(DEBUG_ACX, "using wide channel rate mask");
return CONF_TX_RATE_USE_WIDE_CHAN;
} else if (!strcmp(ht_mode_param, "mimo")) {
wl1271_debug(DEBUG_ACX, "using MIMO rate mask");
/*
* PG 1.0 has some problems with MCS_13, so disable it
*
* TODO: instead of hacking this in here, we should
* make it more general and change a bit in the
* wlvif->rate_set instead.
*/
if (wl->chip.id == CHIP_ID_185x_PG10)
return CONF_TX_MIMO_RATES & ~CONF_HW_BIT_RATE_MCS_13;
return CONF_TX_MIMO_RATES;
} else {
return 0;
}
}
static s8 wl18xx_get_pg_ver(struct wl1271 *wl)
{
u32 fuse;
wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
fuse = wl1271_read32(wl, WL18XX_REG_FUSE_DATA_1_3);
fuse = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET;
wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
return (s8)fuse;
}
static void wl18xx_conf_init(struct wl1271 *wl)
{
struct wl18xx_priv *priv = wl->priv;
/* apply driver default configuration */
memcpy(&wl->conf, &wl18xx_conf, sizeof(wl18xx_conf));
/* apply default private configuration */
memcpy(&priv->conf, &wl18xx_default_priv_conf, sizeof(priv->conf));
}
static int wl18xx_plt_init(struct wl1271 *wl)
{
wl1271_write32(wl, WL18XX_SCR_PAD8, WL18XX_SCR_PAD8_PLT);
return wl->ops->boot(wl);
}
static void wl18xx_get_mac(struct wl1271 *wl)
{
u32 mac1, mac2;
wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
mac1 = wl1271_read32(wl, WL18XX_REG_FUSE_BD_ADDR_1);
mac2 = wl1271_read32(wl, WL18XX_REG_FUSE_BD_ADDR_2);
/* these are the two parts of the BD_ADDR */
wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) +
((mac1 & 0xff000000) >> 24);
wl->fuse_nic_addr = (mac1 & 0xffffff);
wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
}
static int wl18xx_handle_static_data(struct wl1271 *wl,
struct wl1271_static_data *static_data)
{
struct wl18xx_static_data_priv *static_data_priv =
(struct wl18xx_static_data_priv *) static_data->priv;
wl1271_info("PHY firmware version: %s", static_data_priv->phy_version);
return 0;
}
static struct wlcore_ops wl18xx_ops = {
.identify_chip = wl18xx_identify_chip,
.boot = wl18xx_boot,
.plt_init = wl18xx_plt_init,
.trigger_cmd = wl18xx_trigger_cmd,
.ack_event = wl18xx_ack_event,
.calc_tx_blocks = wl18xx_calc_tx_blocks,
.set_tx_desc_blocks = wl18xx_set_tx_desc_blocks,
.set_tx_desc_data_len = wl18xx_set_tx_desc_data_len,
.get_rx_buf_align = wl18xx_get_rx_buf_align,
.get_rx_packet_len = wl18xx_get_rx_packet_len,
.tx_immediate_compl = wl18xx_tx_immediate_completion,
.tx_delayed_compl = NULL,
.hw_init = wl18xx_hw_init,
.set_tx_desc_csum = wl18xx_set_tx_desc_csum,
.get_pg_ver = wl18xx_get_pg_ver,
.set_rx_csum = wl18xx_set_rx_csum,
.sta_get_ap_rate_mask = wl18xx_sta_get_ap_rate_mask,
.ap_get_mimo_wide_rate_mask = wl18xx_ap_get_mimo_wide_rate_mask,
.get_mac = wl18xx_get_mac,
.debugfs_init = wl18xx_debugfs_add_files,
.handle_static_data = wl18xx_handle_static_data,
};
/* HT cap appropriate for wide channels */
static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap = {
.cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 |
IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40,
.ht_supported = true,
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
.mcs = {
.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
.rx_highest = cpu_to_le16(150),
.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
},
};
/* HT cap appropriate for SISO 20 */
static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = {
.cap = IEEE80211_HT_CAP_SGI_20,
.ht_supported = true,
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
.mcs = {
.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
.rx_highest = cpu_to_le16(72),
.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
},
};
/* HT cap appropriate for MIMO rates in 20mhz channel */
static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap = {
.cap = IEEE80211_HT_CAP_SGI_20,
.ht_supported = true,
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
.mcs = {
.rx_mask = { 0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0, },
.rx_highest = cpu_to_le16(144),
.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
},
};
static int __devinit wl18xx_probe(struct platform_device *pdev)
{
struct wl1271 *wl;
struct ieee80211_hw *hw;
struct wl18xx_priv *priv;
hw = wlcore_alloc_hw(sizeof(*priv));
if (IS_ERR(hw)) {
wl1271_error("can't allocate hw");
return PTR_ERR(hw);
}
wl = hw->priv;
priv = wl->priv;
wl->ops = &wl18xx_ops;
wl->ptable = wl18xx_ptable;
wl->rtable = wl18xx_rtable;
wl->num_tx_desc = 32;
wl->num_rx_desc = 16;
wl->normal_tx_spare = WL18XX_TX_HW_BLOCK_SPARE;
wl->gem_tx_spare = WL18XX_TX_HW_GEM_BLOCK_SPARE;
wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX;
wl->hw_min_ht_rate = WL18XX_CONF_HW_RXTX_RATE_MCS0;
wl->fw_status_priv_len = sizeof(struct wl18xx_fw_status_priv);
wl->stats.fw_stats_len = sizeof(struct wl18xx_acx_statistics);
wl->static_data_priv_len = sizeof(struct wl18xx_static_data_priv);
if (!strcmp(ht_mode_param, "wide")) {
memcpy(&wl->ht_cap, &wl18xx_siso40_ht_cap,
sizeof(wl18xx_siso40_ht_cap));
} else if (!strcmp(ht_mode_param, "mimo")) {
memcpy(&wl->ht_cap, &wl18xx_mimo_ht_cap,
sizeof(wl18xx_mimo_ht_cap));
} else if (!strcmp(ht_mode_param, "siso20")) {
memcpy(&wl->ht_cap, &wl18xx_siso20_ht_cap,
sizeof(wl18xx_siso20_ht_cap));
} else {
wl1271_error("invalid ht_mode '%s'", ht_mode_param);
goto out_free;
}
wl18xx_conf_init(wl);
if (!strcmp(board_type_param, "fpga")) {
priv->board_type = BOARD_TYPE_FPGA_18XX;
} else if (!strcmp(board_type_param, "hdk")) {
priv->board_type = BOARD_TYPE_HDK_18XX;
/* HACK! Just for now we hardcode HDK to 0x06 */
priv->conf.phy.low_band_component_type = 0x06;
} else if (!strcmp(board_type_param, "dvp")) {
priv->board_type = BOARD_TYPE_DVP_18XX;
} else if (!strcmp(board_type_param, "evb")) {
priv->board_type = BOARD_TYPE_EVB_18XX;
} else if (!strcmp(board_type_param, "com8")) {
priv->board_type = BOARD_TYPE_COM8_18XX;
/* HACK! Just for now we hardcode COM8 to 0x06 */
priv->conf.phy.low_band_component_type = 0x06;
} else {
wl1271_error("invalid board type '%s'", board_type_param);
goto out_free;
}
/*
* If the module param is not set, update it with the one from
* conf. If it is set, overwrite conf with it.
*/
if (low_band_component == -1)
low_band_component = priv->conf.phy.low_band_component;
else
priv->conf.phy.low_band_component = low_band_component;
if (low_band_component_type == -1)
low_band_component_type =
priv->conf.phy.low_band_component_type;
else
priv->conf.phy.low_band_component_type =
low_band_component_type;
if (high_band_component == -1)
high_band_component = priv->conf.phy.high_band_component;
else
priv->conf.phy.high_band_component = high_band_component;
if (high_band_component_type == -1)
high_band_component_type =
priv->conf.phy.high_band_component_type;
else
priv->conf.phy.high_band_component_type =
high_band_component_type;
if (pwr_limit_reference_11_abg == -1)
pwr_limit_reference_11_abg =
priv->conf.phy.pwr_limit_reference_11_abg;
else
priv->conf.phy.pwr_limit_reference_11_abg =
pwr_limit_reference_11_abg;
if (!checksum_param) {
wl18xx_ops.set_rx_csum = NULL;
wl18xx_ops.init_vif = NULL;
}
wl->enable_11a = enable_11a_param;
return wlcore_probe(wl, pdev);
out_free:
wlcore_free_hw(wl);
return -EINVAL;
}
static const struct platform_device_id wl18xx_id_table[] __devinitconst = {
{ "wl18xx", 0 },
{ } /* Terminating Entry */
};
MODULE_DEVICE_TABLE(platform, wl18xx_id_table);
static struct platform_driver wl18xx_driver = {
.probe = wl18xx_probe,
.remove = __devexit_p(wlcore_remove),
.id_table = wl18xx_id_table,
.driver = {
.name = "wl18xx_driver",
.owner = THIS_MODULE,
}
};
static int __init wl18xx_init(void)
{
return platform_driver_register(&wl18xx_driver);
}
module_init(wl18xx_init);
static void __exit wl18xx_exit(void)
{
platform_driver_unregister(&wl18xx_driver);
}
module_exit(wl18xx_exit);
module_param_named(ht_mode, ht_mode_param, charp, S_IRUSR);
MODULE_PARM_DESC(ht_mode, "Force HT mode: wide (default), mimo or siso20");
module_param_named(board_type, board_type_param, charp, S_IRUSR);
MODULE_PARM_DESC(board_type, "Board type: fpga, hdk (default), evb, com8 or "
"dvp");
module_param_named(dc2dc, dc2dc_param, bool, S_IRUSR);
MODULE_PARM_DESC(dc2dc, "External DC2DC: boolean (defaults to false)");
module_param_named(n_antennas_2, n_antennas_2_param, uint, S_IRUSR);
MODULE_PARM_DESC(n_antennas_2, "Number of installed 2.4GHz antennas: 1 (default) or 2");
module_param_named(n_antennas_5, n_antennas_5_param, uint, S_IRUSR);
MODULE_PARM_DESC(n_antennas_5, "Number of installed 5GHz antennas: 1 (default) or 2");
module_param_named(checksum, checksum_param, bool, S_IRUSR);
MODULE_PARM_DESC(checksum, "Enable TCP checksum: boolean (defaults to false)");
module_param_named(enable_11a, enable_11a_param, bool, S_IRUSR);
MODULE_PARM_DESC(enable_11a, "Enable 11a (5GHz): boolean (defaults to true)");
module_param(low_band_component, uint, S_IRUSR);
MODULE_PARM_DESC(low_band_component, "Low band component: u8 "
"(default is 0x01)");
module_param(low_band_component_type, uint, S_IRUSR);
MODULE_PARM_DESC(low_band_component_type, "Low band component type: u8 "
"(default is 0x05 or 0x06 depending on the board_type)");
module_param(high_band_component, uint, S_IRUSR);
MODULE_PARM_DESC(high_band_component, "High band component: u8, "
"(default is 0x01)");
module_param(high_band_component_type, uint, S_IRUSR);
MODULE_PARM_DESC(high_band_component_type, "High band component type: u8 "
"(default is 0x09)");
module_param(pwr_limit_reference_11_abg, uint, S_IRUSR);
MODULE_PARM_DESC(pwr_limit_reference_11_abg, "Power limit reference: u8 "
"(default is 0xc8)");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
MODULE_FIRMWARE(WL18XX_FW_NAME);
Reference in New Issue View Git Blame Copy Permalink