mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 10:57:03 +07:00
6028f7c4cd
This adds an interface to read the diagnostics of the local SFP transceiver of an FCP-Channel from userspace. This comes in the form of new sysfs entries that are attached to the CCW device representing the FCP device. Each type of data gets its own sysfs entry; the whole collection of entries is pooled into a new child-directory of the CCW device node: "diagnostics". Adds sysfs entries for: * sfp_invalid: boolean value evaluating to whether the following 5 fields are invalid; {0, 1}; 1 - invalid * temperature: transceiver temp.; unit 1/256°C; range [-128°C, +128°C] * vcc: supply voltage; unit 100μV; range [0, 6.55V] * tx_bias: transmitter laser bias current; unit 2μA; range [0, 131mA] * tx_power: coupled TX output power; unit 0.1μW; range [0, 6.5mW] * rx_power: received optical power; unit 0.1μW; range [0, 6.5mW] * optical_port: boolean value evaluating to whether the FCP-Channel has an optical port; {0, 1}; 1 - optical * fec_active: boolean value evaluating to whether 16G FEC is active; {0, 1}; 1 - active * port_tx_type: nibble describing the port type; {0, 1, 2, 3}; 0 - unknown, 1 - short wave, 2 - long wave LC 1310nm, 3 - long wave LL 1550nm * connector_type: two bits describing the connector type; {0, 1}; 0 - unknown, 1 - SFP+ This is only supported if the FCP-Channel in turn supports reporting the SFP Diagnostic Data, otherwise read() on these new entries will return EOPNOTSUPP (this affects only adapters older than FICON Express8S, on Mainframe generations older than z14). Other possible errors for read() include ENOLINK, ENODEV and ENOMEM. With this patch the userspace-interface will only read data stored in the corresponding "diagnostic buffer" (that was stored during completion of an previous Exchange Port Data command). Implicit updating will follow later in this series. Link: https://lore.kernel.org/r/1f9cce7c829c881e7d71a3f10c5b57f3dd84ab32.1572018132.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
550 lines
14 KiB
C
550 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* zfcp device driver
|
|
*
|
|
* Module interface and handling of zfcp data structures.
|
|
*
|
|
* Copyright IBM Corp. 2002, 2018
|
|
*/
|
|
|
|
/*
|
|
* Driver authors:
|
|
* Martin Peschke (originator of the driver)
|
|
* Raimund Schroeder
|
|
* Aron Zeh
|
|
* Wolfgang Taphorn
|
|
* Stefan Bader
|
|
* Heiko Carstens (kernel 2.6 port of the driver)
|
|
* Andreas Herrmann
|
|
* Maxim Shchetynin
|
|
* Volker Sameske
|
|
* Ralph Wuerthner
|
|
* Michael Loehr
|
|
* Swen Schillig
|
|
* Christof Schmitt
|
|
* Martin Petermann
|
|
* Sven Schuetz
|
|
* Steffen Maier
|
|
* Benjamin Block
|
|
*/
|
|
|
|
#define KMSG_COMPONENT "zfcp"
|
|
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
|
|
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include "zfcp_ext.h"
|
|
#include "zfcp_fc.h"
|
|
#include "zfcp_reqlist.h"
|
|
#include "zfcp_diag.h"
|
|
|
|
#define ZFCP_BUS_ID_SIZE 20
|
|
|
|
MODULE_AUTHOR("IBM Deutschland Entwicklung GmbH - linux390@de.ibm.com");
|
|
MODULE_DESCRIPTION("FCP HBA driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static char *init_device;
|
|
module_param_named(device, init_device, charp, 0400);
|
|
MODULE_PARM_DESC(device, "specify initial device");
|
|
|
|
static struct kmem_cache * __init zfcp_cache_hw_align(const char *name,
|
|
unsigned long size)
|
|
{
|
|
return kmem_cache_create(name, size, roundup_pow_of_two(size), 0, NULL);
|
|
}
|
|
|
|
static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun)
|
|
{
|
|
struct ccw_device *cdev;
|
|
struct zfcp_adapter *adapter;
|
|
struct zfcp_port *port;
|
|
|
|
cdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
|
|
if (!cdev)
|
|
return;
|
|
|
|
if (ccw_device_set_online(cdev))
|
|
goto out_ccw_device;
|
|
|
|
adapter = zfcp_ccw_adapter_by_cdev(cdev);
|
|
if (!adapter)
|
|
goto out_ccw_device;
|
|
|
|
port = zfcp_get_port_by_wwpn(adapter, wwpn);
|
|
if (!port)
|
|
goto out_port;
|
|
flush_work(&port->rport_work);
|
|
|
|
zfcp_unit_add(port, lun);
|
|
put_device(&port->dev);
|
|
|
|
out_port:
|
|
zfcp_ccw_adapter_put(adapter);
|
|
out_ccw_device:
|
|
put_device(&cdev->dev);
|
|
return;
|
|
}
|
|
|
|
static void __init zfcp_init_device_setup(char *devstr)
|
|
{
|
|
char *token;
|
|
char *str, *str_saved;
|
|
char busid[ZFCP_BUS_ID_SIZE];
|
|
u64 wwpn, lun;
|
|
|
|
/* duplicate devstr and keep the original for sysfs presentation*/
|
|
str_saved = kstrdup(devstr, GFP_KERNEL);
|
|
str = str_saved;
|
|
if (!str)
|
|
return;
|
|
|
|
token = strsep(&str, ",");
|
|
if (!token || strlen(token) >= ZFCP_BUS_ID_SIZE)
|
|
goto err_out;
|
|
strlcpy(busid, token, ZFCP_BUS_ID_SIZE);
|
|
|
|
token = strsep(&str, ",");
|
|
if (!token || kstrtoull(token, 0, (unsigned long long *) &wwpn))
|
|
goto err_out;
|
|
|
|
token = strsep(&str, ",");
|
|
if (!token || kstrtoull(token, 0, (unsigned long long *) &lun))
|
|
goto err_out;
|
|
|
|
kfree(str_saved);
|
|
zfcp_init_device_configure(busid, wwpn, lun);
|
|
return;
|
|
|
|
err_out:
|
|
kfree(str_saved);
|
|
pr_err("%s is not a valid SCSI device\n", devstr);
|
|
}
|
|
|
|
static int __init zfcp_module_init(void)
|
|
{
|
|
int retval = -ENOMEM;
|
|
|
|
if (zfcp_experimental_dix)
|
|
pr_warn("DIX is enabled. It is experimental and might cause problems\n");
|
|
|
|
zfcp_fsf_qtcb_cache = zfcp_cache_hw_align("zfcp_fsf_qtcb",
|
|
sizeof(struct fsf_qtcb));
|
|
if (!zfcp_fsf_qtcb_cache)
|
|
goto out_qtcb_cache;
|
|
|
|
zfcp_fc_req_cache = zfcp_cache_hw_align("zfcp_fc_req",
|
|
sizeof(struct zfcp_fc_req));
|
|
if (!zfcp_fc_req_cache)
|
|
goto out_fc_cache;
|
|
|
|
zfcp_scsi_transport_template =
|
|
fc_attach_transport(&zfcp_transport_functions);
|
|
if (!zfcp_scsi_transport_template)
|
|
goto out_transport;
|
|
scsi_transport_reserve_device(zfcp_scsi_transport_template,
|
|
sizeof(struct zfcp_scsi_dev));
|
|
|
|
retval = ccw_driver_register(&zfcp_ccw_driver);
|
|
if (retval) {
|
|
pr_err("The zfcp device driver could not register with "
|
|
"the common I/O layer\n");
|
|
goto out_ccw_register;
|
|
}
|
|
|
|
if (init_device)
|
|
zfcp_init_device_setup(init_device);
|
|
return 0;
|
|
|
|
out_ccw_register:
|
|
fc_release_transport(zfcp_scsi_transport_template);
|
|
out_transport:
|
|
kmem_cache_destroy(zfcp_fc_req_cache);
|
|
out_fc_cache:
|
|
kmem_cache_destroy(zfcp_fsf_qtcb_cache);
|
|
out_qtcb_cache:
|
|
return retval;
|
|
}
|
|
|
|
module_init(zfcp_module_init);
|
|
|
|
static void __exit zfcp_module_exit(void)
|
|
{
|
|
ccw_driver_unregister(&zfcp_ccw_driver);
|
|
fc_release_transport(zfcp_scsi_transport_template);
|
|
kmem_cache_destroy(zfcp_fc_req_cache);
|
|
kmem_cache_destroy(zfcp_fsf_qtcb_cache);
|
|
}
|
|
|
|
module_exit(zfcp_module_exit);
|
|
|
|
/**
|
|
* zfcp_get_port_by_wwpn - find port in port list of adapter by wwpn
|
|
* @adapter: pointer to adapter to search for port
|
|
* @wwpn: wwpn to search for
|
|
*
|
|
* Returns: pointer to zfcp_port or NULL
|
|
*/
|
|
struct zfcp_port *zfcp_get_port_by_wwpn(struct zfcp_adapter *adapter,
|
|
u64 wwpn)
|
|
{
|
|
unsigned long flags;
|
|
struct zfcp_port *port;
|
|
|
|
read_lock_irqsave(&adapter->port_list_lock, flags);
|
|
list_for_each_entry(port, &adapter->port_list, list)
|
|
if (port->wwpn == wwpn) {
|
|
if (!get_device(&port->dev))
|
|
port = NULL;
|
|
read_unlock_irqrestore(&adapter->port_list_lock, flags);
|
|
return port;
|
|
}
|
|
read_unlock_irqrestore(&adapter->port_list_lock, flags);
|
|
return NULL;
|
|
}
|
|
|
|
static int zfcp_allocate_low_mem_buffers(struct zfcp_adapter *adapter)
|
|
{
|
|
adapter->pool.erp_req =
|
|
mempool_create_kmalloc_pool(1, sizeof(struct zfcp_fsf_req));
|
|
if (!adapter->pool.erp_req)
|
|
return -ENOMEM;
|
|
|
|
adapter->pool.gid_pn_req =
|
|
mempool_create_kmalloc_pool(1, sizeof(struct zfcp_fsf_req));
|
|
if (!adapter->pool.gid_pn_req)
|
|
return -ENOMEM;
|
|
|
|
adapter->pool.scsi_req =
|
|
mempool_create_kmalloc_pool(1, sizeof(struct zfcp_fsf_req));
|
|
if (!adapter->pool.scsi_req)
|
|
return -ENOMEM;
|
|
|
|
adapter->pool.scsi_abort =
|
|
mempool_create_kmalloc_pool(1, sizeof(struct zfcp_fsf_req));
|
|
if (!adapter->pool.scsi_abort)
|
|
return -ENOMEM;
|
|
|
|
adapter->pool.status_read_req =
|
|
mempool_create_kmalloc_pool(FSF_STATUS_READS_RECOM,
|
|
sizeof(struct zfcp_fsf_req));
|
|
if (!adapter->pool.status_read_req)
|
|
return -ENOMEM;
|
|
|
|
adapter->pool.qtcb_pool =
|
|
mempool_create_slab_pool(4, zfcp_fsf_qtcb_cache);
|
|
if (!adapter->pool.qtcb_pool)
|
|
return -ENOMEM;
|
|
|
|
BUILD_BUG_ON(sizeof(struct fsf_status_read_buffer) > PAGE_SIZE);
|
|
adapter->pool.sr_data =
|
|
mempool_create_page_pool(FSF_STATUS_READS_RECOM, 0);
|
|
if (!adapter->pool.sr_data)
|
|
return -ENOMEM;
|
|
|
|
adapter->pool.gid_pn =
|
|
mempool_create_slab_pool(1, zfcp_fc_req_cache);
|
|
if (!adapter->pool.gid_pn)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void zfcp_free_low_mem_buffers(struct zfcp_adapter *adapter)
|
|
{
|
|
mempool_destroy(adapter->pool.erp_req);
|
|
mempool_destroy(adapter->pool.scsi_req);
|
|
mempool_destroy(adapter->pool.scsi_abort);
|
|
mempool_destroy(adapter->pool.qtcb_pool);
|
|
mempool_destroy(adapter->pool.status_read_req);
|
|
mempool_destroy(adapter->pool.sr_data);
|
|
mempool_destroy(adapter->pool.gid_pn);
|
|
}
|
|
|
|
/**
|
|
* zfcp_status_read_refill - refill the long running status_read_requests
|
|
* @adapter: ptr to struct zfcp_adapter for which the buffers should be refilled
|
|
*
|
|
* Return:
|
|
* * 0 on success meaning at least one status read is pending
|
|
* * 1 if posting failed and not a single status read buffer is pending,
|
|
* also triggers adapter reopen recovery
|
|
*/
|
|
int zfcp_status_read_refill(struct zfcp_adapter *adapter)
|
|
{
|
|
while (atomic_add_unless(&adapter->stat_miss, -1, 0))
|
|
if (zfcp_fsf_status_read(adapter->qdio)) {
|
|
atomic_inc(&adapter->stat_miss); /* undo add -1 */
|
|
if (atomic_read(&adapter->stat_miss) >=
|
|
adapter->stat_read_buf_num) {
|
|
zfcp_erp_adapter_reopen(adapter, 0, "axsref1");
|
|
return 1;
|
|
}
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void _zfcp_status_read_scheduler(struct work_struct *work)
|
|
{
|
|
zfcp_status_read_refill(container_of(work, struct zfcp_adapter,
|
|
stat_work));
|
|
}
|
|
|
|
static void zfcp_print_sl(struct seq_file *m, struct service_level *sl)
|
|
{
|
|
struct zfcp_adapter *adapter =
|
|
container_of(sl, struct zfcp_adapter, service_level);
|
|
|
|
seq_printf(m, "zfcp: %s microcode level %x\n",
|
|
dev_name(&adapter->ccw_device->dev),
|
|
adapter->fsf_lic_version);
|
|
}
|
|
|
|
static int zfcp_setup_adapter_work_queue(struct zfcp_adapter *adapter)
|
|
{
|
|
char name[TASK_COMM_LEN];
|
|
|
|
snprintf(name, sizeof(name), "zfcp_q_%s",
|
|
dev_name(&adapter->ccw_device->dev));
|
|
adapter->work_queue = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
|
|
|
|
if (adapter->work_queue)
|
|
return 0;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void zfcp_destroy_adapter_work_queue(struct zfcp_adapter *adapter)
|
|
{
|
|
if (adapter->work_queue)
|
|
destroy_workqueue(adapter->work_queue);
|
|
adapter->work_queue = NULL;
|
|
|
|
}
|
|
|
|
/**
|
|
* zfcp_adapter_enqueue - enqueue a new adapter to the list
|
|
* @ccw_device: pointer to the struct cc_device
|
|
*
|
|
* Returns: struct zfcp_adapter*
|
|
* Enqueues an adapter at the end of the adapter list in the driver data.
|
|
* All adapter internal structures are set up.
|
|
* Proc-fs entries are also created.
|
|
*/
|
|
struct zfcp_adapter *zfcp_adapter_enqueue(struct ccw_device *ccw_device)
|
|
{
|
|
struct zfcp_adapter *adapter;
|
|
|
|
if (!get_device(&ccw_device->dev))
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
adapter = kzalloc(sizeof(struct zfcp_adapter), GFP_KERNEL);
|
|
if (!adapter) {
|
|
put_device(&ccw_device->dev);
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
kref_init(&adapter->ref);
|
|
|
|
ccw_device->handler = NULL;
|
|
adapter->ccw_device = ccw_device;
|
|
|
|
INIT_WORK(&adapter->stat_work, _zfcp_status_read_scheduler);
|
|
INIT_DELAYED_WORK(&adapter->scan_work, zfcp_fc_scan_ports);
|
|
INIT_WORK(&adapter->ns_up_work, zfcp_fc_sym_name_update);
|
|
|
|
adapter->next_port_scan = jiffies;
|
|
|
|
adapter->erp_action.adapter = adapter;
|
|
|
|
if (zfcp_diag_adapter_setup(adapter))
|
|
goto failed;
|
|
|
|
if (zfcp_qdio_setup(adapter))
|
|
goto failed;
|
|
|
|
if (zfcp_allocate_low_mem_buffers(adapter))
|
|
goto failed;
|
|
|
|
adapter->req_list = zfcp_reqlist_alloc();
|
|
if (!adapter->req_list)
|
|
goto failed;
|
|
|
|
if (zfcp_dbf_adapter_register(adapter))
|
|
goto failed;
|
|
|
|
if (zfcp_setup_adapter_work_queue(adapter))
|
|
goto failed;
|
|
|
|
if (zfcp_fc_gs_setup(adapter))
|
|
goto failed;
|
|
|
|
rwlock_init(&adapter->port_list_lock);
|
|
INIT_LIST_HEAD(&adapter->port_list);
|
|
|
|
INIT_LIST_HEAD(&adapter->events.list);
|
|
INIT_WORK(&adapter->events.work, zfcp_fc_post_event);
|
|
spin_lock_init(&adapter->events.list_lock);
|
|
|
|
init_waitqueue_head(&adapter->erp_ready_wq);
|
|
init_waitqueue_head(&adapter->erp_done_wqh);
|
|
|
|
INIT_LIST_HEAD(&adapter->erp_ready_head);
|
|
INIT_LIST_HEAD(&adapter->erp_running_head);
|
|
|
|
rwlock_init(&adapter->erp_lock);
|
|
rwlock_init(&adapter->abort_lock);
|
|
|
|
if (zfcp_erp_thread_setup(adapter))
|
|
goto failed;
|
|
|
|
adapter->service_level.seq_print = zfcp_print_sl;
|
|
|
|
dev_set_drvdata(&ccw_device->dev, adapter);
|
|
|
|
if (sysfs_create_group(&ccw_device->dev.kobj,
|
|
&zfcp_sysfs_adapter_attrs))
|
|
goto failed;
|
|
|
|
if (zfcp_diag_sysfs_setup(adapter))
|
|
goto failed;
|
|
|
|
/* report size limit per scatter-gather segment */
|
|
adapter->ccw_device->dev.dma_parms = &adapter->dma_parms;
|
|
|
|
adapter->stat_read_buf_num = FSF_STATUS_READS_RECOM;
|
|
|
|
if (!zfcp_scsi_adapter_register(adapter))
|
|
return adapter;
|
|
|
|
failed:
|
|
zfcp_adapter_unregister(adapter);
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
void zfcp_adapter_unregister(struct zfcp_adapter *adapter)
|
|
{
|
|
struct ccw_device *cdev = adapter->ccw_device;
|
|
|
|
cancel_delayed_work_sync(&adapter->scan_work);
|
|
cancel_work_sync(&adapter->stat_work);
|
|
cancel_work_sync(&adapter->ns_up_work);
|
|
zfcp_destroy_adapter_work_queue(adapter);
|
|
|
|
zfcp_fc_wka_ports_force_offline(adapter->gs);
|
|
zfcp_scsi_adapter_unregister(adapter);
|
|
zfcp_diag_sysfs_destroy(adapter);
|
|
sysfs_remove_group(&cdev->dev.kobj, &zfcp_sysfs_adapter_attrs);
|
|
|
|
zfcp_erp_thread_kill(adapter);
|
|
zfcp_dbf_adapter_unregister(adapter);
|
|
zfcp_qdio_destroy(adapter->qdio);
|
|
|
|
zfcp_ccw_adapter_put(adapter); /* final put to release */
|
|
}
|
|
|
|
/**
|
|
* zfcp_adapter_release - remove the adapter from the resource list
|
|
* @ref: pointer to struct kref
|
|
* locks: adapter list write lock is assumed to be held by caller
|
|
*/
|
|
void zfcp_adapter_release(struct kref *ref)
|
|
{
|
|
struct zfcp_adapter *adapter = container_of(ref, struct zfcp_adapter,
|
|
ref);
|
|
struct ccw_device *cdev = adapter->ccw_device;
|
|
|
|
dev_set_drvdata(&adapter->ccw_device->dev, NULL);
|
|
zfcp_fc_gs_destroy(adapter);
|
|
zfcp_free_low_mem_buffers(adapter);
|
|
zfcp_diag_adapter_free(adapter);
|
|
kfree(adapter->req_list);
|
|
kfree(adapter->fc_stats);
|
|
kfree(adapter->stats_reset_data);
|
|
kfree(adapter);
|
|
put_device(&cdev->dev);
|
|
}
|
|
|
|
static void zfcp_port_release(struct device *dev)
|
|
{
|
|
struct zfcp_port *port = container_of(dev, struct zfcp_port, dev);
|
|
|
|
zfcp_ccw_adapter_put(port->adapter);
|
|
kfree(port);
|
|
}
|
|
|
|
/**
|
|
* zfcp_port_enqueue - enqueue port to port list of adapter
|
|
* @adapter: adapter where remote port is added
|
|
* @wwpn: WWPN of the remote port to be enqueued
|
|
* @status: initial status for the port
|
|
* @d_id: destination id of the remote port to be enqueued
|
|
* Returns: pointer to enqueued port on success, ERR_PTR on error
|
|
*
|
|
* All port internal structures are set up and the sysfs entry is generated.
|
|
* d_id is used to enqueue ports with a well known address like the Directory
|
|
* Service for nameserver lookup.
|
|
*/
|
|
struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn,
|
|
u32 status, u32 d_id)
|
|
{
|
|
struct zfcp_port *port;
|
|
int retval = -ENOMEM;
|
|
|
|
kref_get(&adapter->ref);
|
|
|
|
port = zfcp_get_port_by_wwpn(adapter, wwpn);
|
|
if (port) {
|
|
put_device(&port->dev);
|
|
retval = -EEXIST;
|
|
goto err_out;
|
|
}
|
|
|
|
port = kzalloc(sizeof(struct zfcp_port), GFP_KERNEL);
|
|
if (!port)
|
|
goto err_out;
|
|
|
|
rwlock_init(&port->unit_list_lock);
|
|
INIT_LIST_HEAD(&port->unit_list);
|
|
atomic_set(&port->units, 0);
|
|
|
|
INIT_WORK(&port->gid_pn_work, zfcp_fc_port_did_lookup);
|
|
INIT_WORK(&port->test_link_work, zfcp_fc_link_test_work);
|
|
INIT_WORK(&port->rport_work, zfcp_scsi_rport_work);
|
|
|
|
port->adapter = adapter;
|
|
port->d_id = d_id;
|
|
port->wwpn = wwpn;
|
|
port->rport_task = RPORT_NONE;
|
|
port->dev.parent = &adapter->ccw_device->dev;
|
|
port->dev.groups = zfcp_port_attr_groups;
|
|
port->dev.release = zfcp_port_release;
|
|
|
|
port->erp_action.adapter = adapter;
|
|
port->erp_action.port = port;
|
|
|
|
if (dev_set_name(&port->dev, "0x%016llx", (unsigned long long)wwpn)) {
|
|
kfree(port);
|
|
goto err_out;
|
|
}
|
|
retval = -EINVAL;
|
|
|
|
if (device_register(&port->dev)) {
|
|
put_device(&port->dev);
|
|
goto err_out;
|
|
}
|
|
|
|
write_lock_irq(&adapter->port_list_lock);
|
|
list_add_tail(&port->list, &adapter->port_list);
|
|
write_unlock_irq(&adapter->port_list_lock);
|
|
|
|
atomic_or(status | ZFCP_STATUS_COMMON_RUNNING, &port->status);
|
|
|
|
return port;
|
|
|
|
err_out:
|
|
zfcp_ccw_adapter_put(adapter);
|
|
return ERR_PTR(retval);
|
|
}
|