linux_dsm_epyc7002/drivers/mfd/da9063-core.c
Steve Twiss 9011e4a8a6 mfd: da9063: Add support for OnKey driver
Add MFD support for the DA9063 OnKey driver

The function da9063_clear_fault_log() is added to mitigate the case of a
hardware power-cut after a long-long OnKey press. Although there is no
software intervention in this case (by definition) such a shutdown would
cause persistent information within the DA9063 FAULT_LOG that would be
available during the next device restart.

Clearance of this persistent register must be completed after such a
hardware power-cut operation has happened so that the FAULT_LOG does not
continue with previous values. The clearance function has been added here
in the kernel driver because wiping the fault-log cannot be counted on
outside the Linux kernel.

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
[Lee: Removed 'key_power' for Dmitry to take through the Input Tree]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22 12:25:20 +01:00

247 lines
6.0 KiB
C

/*
* da9063-core.c: Device access for Dialog DA9063 modules
*
* Copyright 2012 Dialog Semiconductors Ltd.
* Copyright 2013 Philipp Zabel, Pengutronix
*
* Author: Krystian Garbaciak <krystian.garbaciak@diasemi.com>,
* Michal Hajduk <michal.hajduk@diasemi.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/mfd/core.h>
#include <linux/regmap.h>
#include <linux/mfd/da9063/core.h>
#include <linux/mfd/da9063/pdata.h>
#include <linux/mfd/da9063/registers.h>
#include <linux/proc_fs.h>
#include <linux/kthread.h>
#include <linux/uaccess.h>
static struct resource da9063_regulators_resources[] = {
{
.name = "LDO_LIM",
.start = DA9063_IRQ_LDO_LIM,
.end = DA9063_IRQ_LDO_LIM,
.flags = IORESOURCE_IRQ,
},
};
static struct resource da9063_rtc_resources[] = {
{
.name = "ALARM",
.start = DA9063_IRQ_ALARM,
.end = DA9063_IRQ_ALARM,
.flags = IORESOURCE_IRQ,
},
{
.name = "TICK",
.start = DA9063_IRQ_TICK,
.end = DA9063_IRQ_TICK,
.flags = IORESOURCE_IRQ,
}
};
static struct resource da9063_onkey_resources[] = {
{
.name = "ONKEY",
.start = DA9063_IRQ_ONKEY,
.end = DA9063_IRQ_ONKEY,
.flags = IORESOURCE_IRQ,
},
};
static struct resource da9063_hwmon_resources[] = {
{
.start = DA9063_IRQ_ADC_RDY,
.end = DA9063_IRQ_ADC_RDY,
.flags = IORESOURCE_IRQ,
},
};
static const struct mfd_cell da9063_devs[] = {
{
.name = DA9063_DRVNAME_REGULATORS,
.num_resources = ARRAY_SIZE(da9063_regulators_resources),
.resources = da9063_regulators_resources,
},
{
.name = DA9063_DRVNAME_LEDS,
},
{
.name = DA9063_DRVNAME_WATCHDOG,
.of_compatible = "dlg,da9063-watchdog",
},
{
.name = DA9063_DRVNAME_HWMON,
.num_resources = ARRAY_SIZE(da9063_hwmon_resources),
.resources = da9063_hwmon_resources,
},
{
.name = DA9063_DRVNAME_ONKEY,
.num_resources = ARRAY_SIZE(da9063_onkey_resources),
.resources = da9063_onkey_resources,
.of_compatible = "dlg,da9063-onkey",
},
{
.name = DA9063_DRVNAME_RTC,
.num_resources = ARRAY_SIZE(da9063_rtc_resources),
.resources = da9063_rtc_resources,
.of_compatible = "dlg,da9063-rtc",
},
{
.name = DA9063_DRVNAME_VIBRATION,
},
};
static int da9063_clear_fault_log(struct da9063 *da9063)
{
int ret = 0;
int fault_log = 0;
ret = regmap_read(da9063->regmap, DA9063_REG_FAULT_LOG, &fault_log);
if (ret < 0) {
dev_err(da9063->dev, "Cannot read FAULT_LOG.\n");
return -EIO;
}
if (fault_log) {
if (fault_log & DA9063_TWD_ERROR)
dev_dbg(da9063->dev,
"Fault log entry detected: DA9063_TWD_ERROR\n");
if (fault_log & DA9063_POR)
dev_dbg(da9063->dev,
"Fault log entry detected: DA9063_POR\n");
if (fault_log & DA9063_VDD_FAULT)
dev_dbg(da9063->dev,
"Fault log entry detected: DA9063_VDD_FAULT\n");
if (fault_log & DA9063_VDD_START)
dev_dbg(da9063->dev,
"Fault log entry detected: DA9063_VDD_START\n");
if (fault_log & DA9063_TEMP_CRIT)
dev_dbg(da9063->dev,
"Fault log entry detected: DA9063_TEMP_CRIT\n");
if (fault_log & DA9063_KEY_RESET)
dev_dbg(da9063->dev,
"Fault log entry detected: DA9063_KEY_RESET\n");
if (fault_log & DA9063_NSHUTDOWN)
dev_dbg(da9063->dev,
"Fault log entry detected: DA9063_NSHUTDOWN\n");
if (fault_log & DA9063_WAIT_SHUT)
dev_dbg(da9063->dev,
"Fault log entry detected: DA9063_WAIT_SHUT\n");
}
ret = regmap_write(da9063->regmap,
DA9063_REG_FAULT_LOG,
fault_log);
if (ret < 0)
dev_err(da9063->dev,
"Cannot reset FAULT_LOG values %d\n", ret);
return ret;
}
int da9063_device_init(struct da9063 *da9063, unsigned int irq)
{
struct da9063_pdata *pdata = da9063->dev->platform_data;
int model, variant_id, variant_code;
int ret;
ret = da9063_clear_fault_log(da9063);
if (ret < 0)
dev_err(da9063->dev, "Cannot clear fault log\n");
if (pdata) {
da9063->flags = pdata->flags;
da9063->irq_base = pdata->irq_base;
} else {
da9063->flags = 0;
da9063->irq_base = -1;
}
da9063->chip_irq = irq;
if (pdata && pdata->init != NULL) {
ret = pdata->init(da9063);
if (ret != 0) {
dev_err(da9063->dev,
"Platform initialization failed.\n");
return ret;
}
}
ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model);
if (ret < 0) {
dev_err(da9063->dev, "Cannot read chip model id.\n");
return -EIO;
}
if (model != PMIC_DA9063) {
dev_err(da9063->dev, "Invalid chip model id: 0x%02x\n", model);
return -ENODEV;
}
ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &variant_id);
if (ret < 0) {
dev_err(da9063->dev, "Cannot read chip variant id.\n");
return -EIO;
}
variant_code = variant_id >> DA9063_CHIP_VARIANT_SHIFT;
dev_info(da9063->dev,
"Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n",
model, variant_id);
if (variant_code < PMIC_DA9063_BB && variant_code != PMIC_DA9063_AD) {
dev_err(da9063->dev,
"Cannot support variant code: 0x%02X\n", variant_code);
return -ENODEV;
}
da9063->model = model;
da9063->variant_code = variant_code;
ret = da9063_irq_init(da9063);
if (ret) {
dev_err(da9063->dev, "Cannot initialize interrupts.\n");
return ret;
}
da9063->irq_base = regmap_irq_chip_get_base(da9063->regmap_irq);
ret = mfd_add_devices(da9063->dev, -1, da9063_devs,
ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base,
NULL);
if (ret)
dev_err(da9063->dev, "Cannot add MFD cells\n");
return ret;
}
void da9063_device_exit(struct da9063 *da9063)
{
mfd_remove_devices(da9063->dev);
da9063_irq_exit(da9063);
}
MODULE_DESCRIPTION("PMIC driver for Dialog DA9063");
MODULE_AUTHOR("Krystian Garbaciak <krystian.garbaciak@diasemi.com>, Michal Hajduk <michal.hajduk@diasemi.com>");
MODULE_LICENSE("GPL");