mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 15:49:17 +07:00
458b634cd8
There are now 4 different versions of the GENPIX USB adapter. The newest 'Skywalker' models are fully self-contained, and need no additional hardware to be used. A very reliable DVB-S card even without using any of the alternate modulatations (which this kernel module does not currently support) The following patch adds support for all 4 versions of the genpix adapter (www.genpix-electronics.com). Signed-off-by: Alan Nisota alannisota@gmail.com Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
291 lines
7.1 KiB
C
291 lines
7.1 KiB
C
/* DVB USB compliant Linux driver for the
|
|
* - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
|
|
*
|
|
* Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
|
|
* Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
|
|
*
|
|
* Thanks to GENPIX for the sample code used to implement this module.
|
|
*
|
|
* This module is based off the vp7045 and vp702x modules
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation, version 2.
|
|
*
|
|
* see Documentation/dvb/README.dvb-usb for more information
|
|
*/
|
|
#include "gp8psk.h"
|
|
|
|
struct gp8psk_fe_state {
|
|
struct dvb_frontend fe;
|
|
struct dvb_usb_device *d;
|
|
u8 lock;
|
|
u16 snr;
|
|
unsigned long next_status_check;
|
|
unsigned long status_check_interval;
|
|
};
|
|
|
|
static int gp8psk_fe_update_status(struct gp8psk_fe_state *st)
|
|
{
|
|
u8 buf[6];
|
|
if (time_after(jiffies,st->next_status_check)) {
|
|
gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0,0,&st->lock,1);
|
|
gp8psk_usb_in_op(st->d, GET_SIGNAL_STRENGTH, 0,0,buf,6);
|
|
st->snr = (buf[1]) << 8 | buf[0];
|
|
st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
|
|
{
|
|
struct gp8psk_fe_state *st = fe->demodulator_priv;
|
|
gp8psk_fe_update_status(st);
|
|
|
|
if (st->lock)
|
|
*status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER;
|
|
else
|
|
*status = 0;
|
|
|
|
if (*status & FE_HAS_LOCK)
|
|
st->status_check_interval = 1000;
|
|
else
|
|
st->status_check_interval = 100;
|
|
return 0;
|
|
}
|
|
|
|
/* not supported by this Frontend */
|
|
static int gp8psk_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
|
|
{
|
|
(void) fe;
|
|
*ber = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* not supported by this Frontend */
|
|
static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
|
|
{
|
|
(void) fe;
|
|
*unc = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
|
|
{
|
|
struct gp8psk_fe_state *st = fe->demodulator_priv;
|
|
gp8psk_fe_update_status(st);
|
|
/* snr is reported in dBu*256 */
|
|
*snr = st->snr;
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
|
|
{
|
|
struct gp8psk_fe_state *st = fe->demodulator_priv;
|
|
gp8psk_fe_update_status(st);
|
|
/* snr is reported in dBu*256 */
|
|
/* snr / 38.4 ~= 100% strength */
|
|
/* snr * 17 returns 100% strength as 65535 */
|
|
if (st->snr > 0xf00)
|
|
*strength = 0xffff;
|
|
else
|
|
*strength = (st->snr << 4) + st->snr; /* snr*17 */
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
|
|
{
|
|
tune->min_delay_ms = 200;
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_fe_set_frontend(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct gp8psk_fe_state *state = fe->demodulator_priv;
|
|
u8 cmd[10];
|
|
u32 freq = fep->frequency * 1000;
|
|
|
|
cmd[4] = freq & 0xff;
|
|
cmd[5] = (freq >> 8) & 0xff;
|
|
cmd[6] = (freq >> 16) & 0xff;
|
|
cmd[7] = (freq >> 24) & 0xff;
|
|
|
|
switch(fe->ops.info.type) {
|
|
case FE_QPSK:
|
|
cmd[0] = fep->u.qpsk.symbol_rate & 0xff;
|
|
cmd[1] = (fep->u.qpsk.symbol_rate >> 8) & 0xff;
|
|
cmd[2] = (fep->u.qpsk.symbol_rate >> 16) & 0xff;
|
|
cmd[3] = (fep->u.qpsk.symbol_rate >> 24) & 0xff;
|
|
cmd[8] = ADV_MOD_DVB_QPSK;
|
|
cmd[9] = 0x03; /*ADV_MOD_FEC_XXX*/
|
|
break;
|
|
default:
|
|
// other modes are unsuported right now
|
|
cmd[0] = 0;
|
|
cmd[1] = 0;
|
|
cmd[2] = 0;
|
|
cmd[3] = 0;
|
|
cmd[8] = 0;
|
|
cmd[9] = 0;
|
|
break;
|
|
}
|
|
|
|
gp8psk_usb_out_op(state->d,TUNE_8PSK,0,0,cmd,10);
|
|
|
|
state->lock = 0;
|
|
state->next_status_check = jiffies;
|
|
state->status_check_interval = 200;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_fe_get_frontend(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *fep)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe,
|
|
struct dvb_diseqc_master_cmd *m)
|
|
{
|
|
struct gp8psk_fe_state *st = fe->demodulator_priv;
|
|
|
|
deb_fe("%s\n",__FUNCTION__);
|
|
|
|
if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0,
|
|
m->msg, m->msg_len)) {
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_fe_send_diseqc_burst (struct dvb_frontend* fe,
|
|
fe_sec_mini_cmd_t burst)
|
|
{
|
|
struct gp8psk_fe_state *st = fe->demodulator_priv;
|
|
u8 cmd;
|
|
|
|
deb_fe("%s\n",__FUNCTION__);
|
|
|
|
/* These commands are certainly wrong */
|
|
cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01;
|
|
|
|
if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, cmd, 0,
|
|
&cmd, 0)) {
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_fe_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
|
|
{
|
|
struct gp8psk_fe_state* state = fe->demodulator_priv;
|
|
|
|
if (gp8psk_usb_out_op(state->d,SET_22KHZ_TONE,
|
|
(tone == SEC_TONE_ON), 0, NULL, 0)) {
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
|
|
{
|
|
struct gp8psk_fe_state* state = fe->demodulator_priv;
|
|
|
|
if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE,
|
|
voltage == SEC_VOLTAGE_18, 0, NULL, 0)) {
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff)
|
|
{
|
|
struct gp8psk_fe_state* state = fe->demodulator_priv;
|
|
return gp8psk_usb_out_op(state->d, USE_EXTRA_VOLT, onoff, 0,NULL,0);
|
|
}
|
|
|
|
static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd)
|
|
{
|
|
struct gp8psk_fe_state* state = fe->demodulator_priv;
|
|
u8 cmd = sw_cmd & 0x7f;
|
|
|
|
if (gp8psk_usb_out_op(state->d,SET_DN_SWITCH, cmd, 0,
|
|
NULL, 0)) {
|
|
return -EINVAL;
|
|
}
|
|
if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, !!(sw_cmd & 0x80),
|
|
0, NULL, 0)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gp8psk_fe_release(struct dvb_frontend* fe)
|
|
{
|
|
struct gp8psk_fe_state *state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static struct dvb_frontend_ops gp8psk_fe_ops;
|
|
|
|
struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d)
|
|
{
|
|
struct gp8psk_fe_state *s = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL);
|
|
if (s == NULL)
|
|
goto error;
|
|
|
|
s->d = d;
|
|
memcpy(&s->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops));
|
|
s->fe.demodulator_priv = s;
|
|
|
|
goto success;
|
|
error:
|
|
return NULL;
|
|
success:
|
|
return &s->fe;
|
|
}
|
|
|
|
|
|
static struct dvb_frontend_ops gp8psk_fe_ops = {
|
|
.info = {
|
|
.name = "Genpix 8psk-to-USB2 DVB-S",
|
|
.type = FE_QPSK,
|
|
.frequency_min = 800000,
|
|
.frequency_max = 2250000,
|
|
.frequency_stepsize = 100,
|
|
.symbol_rate_min = 1000000,
|
|
.symbol_rate_max = 45000000,
|
|
.symbol_rate_tolerance = 500, /* ppm */
|
|
.caps = FE_CAN_INVERSION_AUTO |
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK
|
|
},
|
|
|
|
.release = gp8psk_fe_release,
|
|
|
|
.init = NULL,
|
|
.sleep = NULL,
|
|
|
|
.set_frontend = gp8psk_fe_set_frontend,
|
|
.get_frontend = gp8psk_fe_get_frontend,
|
|
.get_tune_settings = gp8psk_fe_get_tune_settings,
|
|
|
|
.read_status = gp8psk_fe_read_status,
|
|
.read_ber = gp8psk_fe_read_ber,
|
|
.read_signal_strength = gp8psk_fe_read_signal_strength,
|
|
.read_snr = gp8psk_fe_read_snr,
|
|
.read_ucblocks = gp8psk_fe_read_unc_blocks,
|
|
|
|
.diseqc_send_master_cmd = gp8psk_fe_send_diseqc_msg,
|
|
.diseqc_send_burst = gp8psk_fe_send_diseqc_burst,
|
|
.set_tone = gp8psk_fe_set_tone,
|
|
.set_voltage = gp8psk_fe_set_voltage,
|
|
.dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd,
|
|
.enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage
|
|
};
|