linux_dsm_epyc7002/arch/sparc/include/asm/ttable.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

685 lines
20 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _SPARC64_TTABLE_H
#define _SPARC64_TTABLE_H
#include <asm/utrap.h>
#include <asm/pil.h>
#ifdef __ASSEMBLY__
#include <asm/thread_info.h>
#endif
#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop;
/* We need a "cleaned" instruction... */
#define CLEAN_WINDOW \
rdpr %cleanwin, %l0; add %l0, 1, %l0; \
wrpr %l0, 0x0, %cleanwin; \
clr %o0; clr %o1; clr %o2; clr %o3; \
clr %o4; clr %o5; clr %o6; clr %o7; \
clr %l0; clr %l1; clr %l2; clr %l3; \
clr %l4; clr %l5; clr %l6; clr %l7; \
retry; \
nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;
#define TRAP(routine) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etrap; \
109: or %g7, %lo(109b), %g7; \
call routine; \
add %sp, PTREGS_OFF, %o0; \
ba,pt %xcc, rtrap; \
nop; \
nop;
#define TRAP_7INSNS(routine) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etrap; \
109: or %g7, %lo(109b), %g7; \
call routine; \
add %sp, PTREGS_OFF, %o0; \
ba,pt %xcc, rtrap; \
nop;
#define TRAP_SAVEFPU(routine) \
sethi %hi(109f), %g7; \
ba,pt %xcc, do_fptrap; \
109: or %g7, %lo(109b), %g7; \
call routine; \
add %sp, PTREGS_OFF, %o0; \
ba,pt %xcc, rtrap; \
nop; \
nop;
#define TRAP_NOSAVE(routine) \
ba,pt %xcc, routine; \
nop; \
nop; nop; nop; nop; nop; nop;
#define TRAP_NOSAVE_7INSNS(routine) \
ba,pt %xcc, routine; \
nop; \
nop; nop; nop; nop; nop;
#define TRAPTL1(routine) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etraptl1; \
109: or %g7, %lo(109b), %g7; \
call routine; \
add %sp, PTREGS_OFF, %o0; \
ba,pt %xcc, rtrap; \
nop; \
nop;
#define TRAP_ARG(routine, arg) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etrap; \
109: or %g7, %lo(109b), %g7; \
add %sp, PTREGS_OFF, %o0; \
call routine; \
mov arg, %o1; \
ba,pt %xcc, rtrap; \
nop;
#define TRAPTL1_ARG(routine, arg) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etraptl1; \
109: or %g7, %lo(109b), %g7; \
add %sp, PTREGS_OFF, %o0; \
call routine; \
mov arg, %o1; \
ba,pt %xcc, rtrap; \
nop;
#define SYSCALL_TRAP(routine, systbl) \
rdpr %pil, %g2; \
mov TSTATE_SYSCALL, %g3; \
sethi %hi(109f), %g7; \
ba,pt %xcc, etrap_syscall; \
109: or %g7, %lo(109b), %g7; \
sethi %hi(systbl), %l7; \
ba,pt %xcc, routine; \
or %l7, %lo(systbl), %l7;
#define TRAP_UTRAP(handler,lvl) \
mov handler, %g3; \
ba,pt %xcc, utrap_trap; \
mov lvl, %g4; \
nop; \
nop; \
nop; \
nop; \
nop;
#ifdef CONFIG_COMPAT
#define LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32)
#else
#define LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110)
#endif
#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64)
#define GETCC_TRAP TRAP(getcc)
#define SETCC_TRAP TRAP(setcc)
#define BREAKPOINT_TRAP TRAP(breakpoint_trap)
#ifdef CONFIG_TRACE_IRQFLAGS
#define TRAP_IRQ(routine, level) \
rdpr %pil, %g2; \
wrpr %g0, PIL_NORMAL_MAX, %pil; \
sethi %hi(1f-4), %g7; \
ba,pt %xcc, etrap_irq; \
or %g7, %lo(1f-4), %g7; \
nop; \
nop; \
nop; \
.subsection 2; \
1: call trace_hardirqs_off; \
nop; \
mov level, %o0; \
call routine; \
add %sp, PTREGS_OFF, %o1; \
ba,a,pt %xcc, rtrap_irq; \
.previous;
#else
#define TRAP_IRQ(routine, level) \
rdpr %pil, %g2; \
wrpr %g0, PIL_NORMAL_MAX, %pil; \
ba,pt %xcc, etrap_irq; \
rd %pc, %g7; \
mov level, %o0; \
call routine; \
add %sp, PTREGS_OFF, %o1; \
ba,a,pt %xcc, rtrap_irq;
#endif
#define TRAP_NMI_IRQ(routine, level) \
rdpr %pil, %g2; \
wrpr %g0, PIL_NMI, %pil; \
ba,pt %xcc, etrap_irq; \
rd %pc, %g7; \
mov level, %o0; \
call routine; \
add %sp, PTREGS_OFF, %o1; \
ba,a,pt %xcc, rtrap_nmi;
#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl)
#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl)
#define FLUSH_WINDOW_TRAP \
ba,pt %xcc, etrap; \
rd %pc, %g7; \
flushw; \
ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1; \
add %l1, 4, %l2; \
stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]; \
ba,pt %xcc, rtrap; \
stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC];
#ifdef CONFIG_KPROBES
#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl)
#else
#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
#endif
#ifdef CONFIG_UPROBES
#define UPROBES_TRAP(lvl) TRAP_ARG(uprobe_trap, lvl)
#else
#define UPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
#endif
#ifdef CONFIG_KGDB
#define KGDB_TRAP(lvl) TRAP_IRQ(kgdb_trap, lvl)
#else
#define KGDB_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
#endif
#define SUN4V_ITSB_MISS \
ldxa [%g0] ASI_SCRATCHPAD, %g2; \
ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4; \
ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5; \
srlx %g4, 22, %g6; \
ba,pt %xcc, sun4v_itsb_miss; \
nop; \
nop; \
nop;
#define SUN4V_DTSB_MISS \
ldxa [%g0] ASI_SCRATCHPAD, %g2; \
ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4; \
ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5; \
srlx %g4, 22, %g6; \
ba,pt %xcc, sun4v_dtsb_miss; \
nop; \
nop; \
nop;
/* Before touching these macros, you owe it to yourself to go and
* see how arch/sparc64/kernel/winfixup.S works... -DaveM
*
* For the user cases we used to use the %asi register, but
* it turns out that the "wr xxx, %asi" costs ~5 cycles, so
* now we use immediate ASI loads and stores instead. Kudos
* to Greg Onufer for pointing out this performance anomaly.
*
* Further note that we cannot use the g2, g4, g5, and g7 alternate
* globals in the spill routines, check out the save instruction in
* arch/sparc64/kernel/etrap.S to see what I mean about g2, and
* g4/g5 are the globals which are preserved by etrap processing
* for the caller of it. The g7 register is the return pc for
* etrap. Finally, g6 is the current thread register so we cannot
* us it in the spill handlers either. Most of these rules do not
* apply to fill processing, only g6 is not usable.
*/
/* Normal kernel spill */
#define SPILL_0_NORMAL \
stx %l0, [%sp + STACK_BIAS + 0x00]; \
stx %l1, [%sp + STACK_BIAS + 0x08]; \
stx %l2, [%sp + STACK_BIAS + 0x10]; \
stx %l3, [%sp + STACK_BIAS + 0x18]; \
stx %l4, [%sp + STACK_BIAS + 0x20]; \
stx %l5, [%sp + STACK_BIAS + 0x28]; \
stx %l6, [%sp + STACK_BIAS + 0x30]; \
stx %l7, [%sp + STACK_BIAS + 0x38]; \
stx %i0, [%sp + STACK_BIAS + 0x40]; \
stx %i1, [%sp + STACK_BIAS + 0x48]; \
stx %i2, [%sp + STACK_BIAS + 0x50]; \
stx %i3, [%sp + STACK_BIAS + 0x58]; \
stx %i4, [%sp + STACK_BIAS + 0x60]; \
stx %i5, [%sp + STACK_BIAS + 0x68]; \
stx %i6, [%sp + STACK_BIAS + 0x70]; \
stx %i7, [%sp + STACK_BIAS + 0x78]; \
saved; retry; nop; nop; nop; nop; nop; nop; \
nop; nop; nop; nop; nop; nop; nop; nop;
#define SPILL_0_NORMAL_ETRAP \
etrap_kernel_spill: \
stx %l0, [%sp + STACK_BIAS + 0x00]; \
stx %l1, [%sp + STACK_BIAS + 0x08]; \
stx %l2, [%sp + STACK_BIAS + 0x10]; \
stx %l3, [%sp + STACK_BIAS + 0x18]; \
stx %l4, [%sp + STACK_BIAS + 0x20]; \
stx %l5, [%sp + STACK_BIAS + 0x28]; \
stx %l6, [%sp + STACK_BIAS + 0x30]; \
stx %l7, [%sp + STACK_BIAS + 0x38]; \
stx %i0, [%sp + STACK_BIAS + 0x40]; \
stx %i1, [%sp + STACK_BIAS + 0x48]; \
stx %i2, [%sp + STACK_BIAS + 0x50]; \
stx %i3, [%sp + STACK_BIAS + 0x58]; \
stx %i4, [%sp + STACK_BIAS + 0x60]; \
stx %i5, [%sp + STACK_BIAS + 0x68]; \
stx %i6, [%sp + STACK_BIAS + 0x70]; \
stx %i7, [%sp + STACK_BIAS + 0x78]; \
saved; \
sub %g1, 2, %g1; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; nop; nop; nop; nop; \
nop; nop; nop; nop;
/* Normal 64bit spill */
#define SPILL_1_GENERIC(ASI) \
add %sp, STACK_BIAS + 0x00, %g1; \
stxa %l0, [%g1 + %g0] ASI; \
mov 0x08, %g3; \
stxa %l1, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %l2, [%g1 + %g0] ASI; \
stxa %l3, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %l4, [%g1 + %g0] ASI; \
stxa %l5, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %l6, [%g1 + %g0] ASI; \
stxa %l7, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %i0, [%g1 + %g0] ASI; \
stxa %i1, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %i2, [%g1 + %g0] ASI; \
stxa %i3, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %i4, [%g1 + %g0] ASI; \
stxa %i5, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %i6, [%g1 + %g0] ASI; \
stxa %i7, [%g1 + %g3] ASI; \
saved; \
retry; nop; nop; \
b,a,pt %xcc, spill_fixup_dax; \
b,a,pt %xcc, spill_fixup_mna; \
b,a,pt %xcc, spill_fixup;
#define SPILL_1_GENERIC_ETRAP \
etrap_user_spill_64bit: \
stxa %l0, [%sp + STACK_BIAS + 0x00] %asi; \
stxa %l1, [%sp + STACK_BIAS + 0x08] %asi; \
stxa %l2, [%sp + STACK_BIAS + 0x10] %asi; \
stxa %l3, [%sp + STACK_BIAS + 0x18] %asi; \
stxa %l4, [%sp + STACK_BIAS + 0x20] %asi; \
stxa %l5, [%sp + STACK_BIAS + 0x28] %asi; \
stxa %l6, [%sp + STACK_BIAS + 0x30] %asi; \
stxa %l7, [%sp + STACK_BIAS + 0x38] %asi; \
stxa %i0, [%sp + STACK_BIAS + 0x40] %asi; \
stxa %i1, [%sp + STACK_BIAS + 0x48] %asi; \
stxa %i2, [%sp + STACK_BIAS + 0x50] %asi; \
stxa %i3, [%sp + STACK_BIAS + 0x58] %asi; \
stxa %i4, [%sp + STACK_BIAS + 0x60] %asi; \
stxa %i5, [%sp + STACK_BIAS + 0x68] %asi; \
stxa %i6, [%sp + STACK_BIAS + 0x70] %asi; \
stxa %i7, [%sp + STACK_BIAS + 0x78] %asi; \
saved; \
sub %g1, 2, %g1; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; nop; \
nop; nop; nop; nop; \
ba,a,pt %xcc, etrap_spill_fixup_64bit; \
ba,a,pt %xcc, etrap_spill_fixup_64bit; \
ba,a,pt %xcc, etrap_spill_fixup_64bit;
#define SPILL_1_GENERIC_ETRAP_FIXUP \
etrap_spill_fixup_64bit: \
ldub [%g6 + TI_WSAVED], %g1; \
sll %g1, 3, %g3; \
add %g6, %g3, %g3; \
stx %sp, [%g3 + TI_RWIN_SPTRS]; \
sll %g1, 7, %g3; \
add %g6, %g3, %g3; \
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]; \
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]; \
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]; \
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]; \
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]; \
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]; \
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]; \
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]; \
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]; \
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]; \
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]; \
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]; \
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]; \
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]; \
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]; \
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]; \
add %g1, 1, %g1; \
stb %g1, [%g6 + TI_WSAVED]; \
saved; \
rdpr %cwp, %g1; \
sub %g1, 2, %g1; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop
/* Normal 32bit spill */
#define SPILL_2_GENERIC(ASI) \
and %sp, 1, %g3; \
brnz,pn %g3, (. - (128 + 4)); \
srl %sp, 0, %sp; \
stwa %l0, [%sp + %g0] ASI; \
mov 0x04, %g3; \
stwa %l1, [%sp + %g3] ASI; \
add %sp, 0x08, %g1; \
stwa %l2, [%g1 + %g0] ASI; \
stwa %l3, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %l4, [%g1 + %g0] ASI; \
stwa %l5, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %l6, [%g1 + %g0] ASI; \
stwa %l7, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %i0, [%g1 + %g0] ASI; \
stwa %i1, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %i2, [%g1 + %g0] ASI; \
stwa %i3, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %i4, [%g1 + %g0] ASI; \
stwa %i5, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %i6, [%g1 + %g0] ASI; \
stwa %i7, [%g1 + %g3] ASI; \
saved; \
retry; \
b,a,pt %xcc, spill_fixup_dax; \
b,a,pt %xcc, spill_fixup_mna; \
b,a,pt %xcc, spill_fixup;
#define SPILL_2_GENERIC_ETRAP \
etrap_user_spill_32bit: \
and %sp, 1, %g3; \
brnz,pn %g3, etrap_user_spill_64bit; \
srl %sp, 0, %sp; \
stwa %l0, [%sp + 0x00] %asi; \
stwa %l1, [%sp + 0x04] %asi; \
stwa %l2, [%sp + 0x08] %asi; \
stwa %l3, [%sp + 0x0c] %asi; \
stwa %l4, [%sp + 0x10] %asi; \
stwa %l5, [%sp + 0x14] %asi; \
stwa %l6, [%sp + 0x18] %asi; \
stwa %l7, [%sp + 0x1c] %asi; \
stwa %i0, [%sp + 0x20] %asi; \
stwa %i1, [%sp + 0x24] %asi; \
stwa %i2, [%sp + 0x28] %asi; \
stwa %i3, [%sp + 0x2c] %asi; \
stwa %i4, [%sp + 0x30] %asi; \
stwa %i5, [%sp + 0x34] %asi; \
stwa %i6, [%sp + 0x38] %asi; \
stwa %i7, [%sp + 0x3c] %asi; \
saved; \
sub %g1, 2, %g1; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; \
nop; nop; \
ba,a,pt %xcc, etrap_spill_fixup_32bit; \
ba,a,pt %xcc, etrap_spill_fixup_32bit; \
ba,a,pt %xcc, etrap_spill_fixup_32bit;
#define SPILL_2_GENERIC_ETRAP_FIXUP \
etrap_spill_fixup_32bit: \
ldub [%g6 + TI_WSAVED], %g1; \
sll %g1, 3, %g3; \
add %g6, %g3, %g3; \
stx %sp, [%g3 + TI_RWIN_SPTRS]; \
sll %g1, 7, %g3; \
add %g6, %g3, %g3; \
stw %l0, [%g3 + TI_REG_WINDOW + 0x00]; \
stw %l1, [%g3 + TI_REG_WINDOW + 0x04]; \
stw %l2, [%g3 + TI_REG_WINDOW + 0x08]; \
stw %l3, [%g3 + TI_REG_WINDOW + 0x0c]; \
stw %l4, [%g3 + TI_REG_WINDOW + 0x10]; \
stw %l5, [%g3 + TI_REG_WINDOW + 0x14]; \
stw %l6, [%g3 + TI_REG_WINDOW + 0x18]; \
stw %l7, [%g3 + TI_REG_WINDOW + 0x1c]; \
stw %i0, [%g3 + TI_REG_WINDOW + 0x20]; \
stw %i1, [%g3 + TI_REG_WINDOW + 0x24]; \
stw %i2, [%g3 + TI_REG_WINDOW + 0x28]; \
stw %i3, [%g3 + TI_REG_WINDOW + 0x2c]; \
stw %i4, [%g3 + TI_REG_WINDOW + 0x30]; \
stw %i5, [%g3 + TI_REG_WINDOW + 0x34]; \
stw %i6, [%g3 + TI_REG_WINDOW + 0x38]; \
stw %i7, [%g3 + TI_REG_WINDOW + 0x3c]; \
add %g1, 1, %g1; \
stb %g1, [%g6 + TI_WSAVED]; \
saved; \
rdpr %cwp, %g1; \
sub %g1, 2, %g1; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop
#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP)
#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP)
#define SPILL_3_NORMAL SPILL_0_NORMAL
#define SPILL_4_NORMAL SPILL_0_NORMAL
#define SPILL_5_NORMAL SPILL_0_NORMAL
#define SPILL_6_NORMAL SPILL_0_NORMAL
#define SPILL_7_NORMAL SPILL_0_NORMAL
#define SPILL_0_OTHER SPILL_0_NORMAL
#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS)
#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS)
#define SPILL_3_OTHER SPILL_3_NORMAL
#define SPILL_4_OTHER SPILL_4_NORMAL
#define SPILL_5_OTHER SPILL_5_NORMAL
#define SPILL_6_OTHER SPILL_6_NORMAL
#define SPILL_7_OTHER SPILL_7_NORMAL
/* Normal kernel fill */
#define FILL_0_NORMAL \
ldx [%sp + STACK_BIAS + 0x00], %l0; \
ldx [%sp + STACK_BIAS + 0x08], %l1; \
ldx [%sp + STACK_BIAS + 0x10], %l2; \
ldx [%sp + STACK_BIAS + 0x18], %l3; \
ldx [%sp + STACK_BIAS + 0x20], %l4; \
ldx [%sp + STACK_BIAS + 0x28], %l5; \
ldx [%sp + STACK_BIAS + 0x30], %l6; \
ldx [%sp + STACK_BIAS + 0x38], %l7; \
ldx [%sp + STACK_BIAS + 0x40], %i0; \
ldx [%sp + STACK_BIAS + 0x48], %i1; \
ldx [%sp + STACK_BIAS + 0x50], %i2; \
ldx [%sp + STACK_BIAS + 0x58], %i3; \
ldx [%sp + STACK_BIAS + 0x60], %i4; \
ldx [%sp + STACK_BIAS + 0x68], %i5; \
ldx [%sp + STACK_BIAS + 0x70], %i6; \
ldx [%sp + STACK_BIAS + 0x78], %i7; \
restored; retry; nop; nop; nop; nop; nop; nop; \
nop; nop; nop; nop; nop; nop; nop; nop;
#define FILL_0_NORMAL_RTRAP \
kern_rtt_fill: \
rdpr %cwp, %g1; \
sub %g1, 1, %g1; \
wrpr %g1, %cwp; \
ldx [%sp + STACK_BIAS + 0x00], %l0; \
ldx [%sp + STACK_BIAS + 0x08], %l1; \
ldx [%sp + STACK_BIAS + 0x10], %l2; \
ldx [%sp + STACK_BIAS + 0x18], %l3; \
ldx [%sp + STACK_BIAS + 0x20], %l4; \
ldx [%sp + STACK_BIAS + 0x28], %l5; \
ldx [%sp + STACK_BIAS + 0x30], %l6; \
ldx [%sp + STACK_BIAS + 0x38], %l7; \
ldx [%sp + STACK_BIAS + 0x40], %i0; \
ldx [%sp + STACK_BIAS + 0x48], %i1; \
ldx [%sp + STACK_BIAS + 0x50], %i2; \
ldx [%sp + STACK_BIAS + 0x58], %i3; \
ldx [%sp + STACK_BIAS + 0x60], %i4; \
ldx [%sp + STACK_BIAS + 0x68], %i5; \
ldx [%sp + STACK_BIAS + 0x70], %i6; \
ldx [%sp + STACK_BIAS + 0x78], %i7; \
restored; \
add %g1, 1, %g1; \
ba,pt %xcc, kern_rtt_restore; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; nop; \
nop; nop; nop; nop;
/* Normal 64bit fill */
#define FILL_1_GENERIC(ASI) \
add %sp, STACK_BIAS + 0x00, %g1; \
ldxa [%g1 + %g0] ASI, %l0; \
mov 0x08, %g2; \
mov 0x10, %g3; \
ldxa [%g1 + %g2] ASI, %l1; \
mov 0x18, %g5; \
ldxa [%g1 + %g3] ASI, %l2; \
ldxa [%g1 + %g5] ASI, %l3; \
add %g1, 0x20, %g1; \
ldxa [%g1 + %g0] ASI, %l4; \
ldxa [%g1 + %g2] ASI, %l5; \
ldxa [%g1 + %g3] ASI, %l6; \
ldxa [%g1 + %g5] ASI, %l7; \
add %g1, 0x20, %g1; \
ldxa [%g1 + %g0] ASI, %i0; \
ldxa [%g1 + %g2] ASI, %i1; \
ldxa [%g1 + %g3] ASI, %i2; \
ldxa [%g1 + %g5] ASI, %i3; \
add %g1, 0x20, %g1; \
ldxa [%g1 + %g0] ASI, %i4; \
ldxa [%g1 + %g2] ASI, %i5; \
ldxa [%g1 + %g3] ASI, %i6; \
ldxa [%g1 + %g5] ASI, %i7; \
restored; \
retry; nop; nop; nop; nop; \
b,a,pt %xcc, fill_fixup_dax; \
b,a,pt %xcc, fill_fixup_mna; \
b,a,pt %xcc, fill_fixup;
#define FILL_1_GENERIC_RTRAP \
user_rtt_fill_64bit: \
ldxa [%sp + STACK_BIAS + 0x00] %asi, %l0; \
ldxa [%sp + STACK_BIAS + 0x08] %asi, %l1; \
ldxa [%sp + STACK_BIAS + 0x10] %asi, %l2; \
ldxa [%sp + STACK_BIAS + 0x18] %asi, %l3; \
ldxa [%sp + STACK_BIAS + 0x20] %asi, %l4; \
ldxa [%sp + STACK_BIAS + 0x28] %asi, %l5; \
ldxa [%sp + STACK_BIAS + 0x30] %asi, %l6; \
ldxa [%sp + STACK_BIAS + 0x38] %asi, %l7; \
ldxa [%sp + STACK_BIAS + 0x40] %asi, %i0; \
ldxa [%sp + STACK_BIAS + 0x48] %asi, %i1; \
ldxa [%sp + STACK_BIAS + 0x50] %asi, %i2; \
ldxa [%sp + STACK_BIAS + 0x58] %asi, %i3; \
ldxa [%sp + STACK_BIAS + 0x60] %asi, %i4; \
ldxa [%sp + STACK_BIAS + 0x68] %asi, %i5; \
ldxa [%sp + STACK_BIAS + 0x70] %asi, %i6; \
ldxa [%sp + STACK_BIAS + 0x78] %asi, %i7; \
ba,pt %xcc, user_rtt_pre_restore; \
restored; \
nop; nop; nop; nop; nop; nop; \
nop; nop; nop; nop; nop; \
ba,a,pt %xcc, user_rtt_fill_fixup_dax; \
ba,a,pt %xcc, user_rtt_fill_fixup_mna; \
ba,a,pt %xcc, user_rtt_fill_fixup;
/* Normal 32bit fill */
#define FILL_2_GENERIC(ASI) \
and %sp, 1, %g3; \
brnz,pn %g3, (. - (128 + 4)); \
srl %sp, 0, %sp; \
lduwa [%sp + %g0] ASI, %l0; \
mov 0x04, %g2; \
mov 0x08, %g3; \
lduwa [%sp + %g2] ASI, %l1; \
mov 0x0c, %g5; \
lduwa [%sp + %g3] ASI, %l2; \
lduwa [%sp + %g5] ASI, %l3; \
add %sp, 0x10, %g1; \
lduwa [%g1 + %g0] ASI, %l4; \
lduwa [%g1 + %g2] ASI, %l5; \
lduwa [%g1 + %g3] ASI, %l6; \
lduwa [%g1 + %g5] ASI, %l7; \
add %g1, 0x10, %g1; \
lduwa [%g1 + %g0] ASI, %i0; \
lduwa [%g1 + %g2] ASI, %i1; \
lduwa [%g1 + %g3] ASI, %i2; \
lduwa [%g1 + %g5] ASI, %i3; \
add %g1, 0x10, %g1; \
lduwa [%g1 + %g0] ASI, %i4; \
lduwa [%g1 + %g2] ASI, %i5; \
lduwa [%g1 + %g3] ASI, %i6; \
lduwa [%g1 + %g5] ASI, %i7; \
restored; \
retry; nop; nop; \
b,a,pt %xcc, fill_fixup_dax; \
b,a,pt %xcc, fill_fixup_mna; \
b,a,pt %xcc, fill_fixup;
#define FILL_2_GENERIC_RTRAP \
user_rtt_fill_32bit: \
and %sp, 1, %g3; \
brnz,pn %g3, user_rtt_fill_64bit; \
srl %sp, 0, %sp; \
lduwa [%sp + 0x00] %asi, %l0; \
lduwa [%sp + 0x04] %asi, %l1; \
lduwa [%sp + 0x08] %asi, %l2; \
lduwa [%sp + 0x0c] %asi, %l3; \
lduwa [%sp + 0x10] %asi, %l4; \
lduwa [%sp + 0x14] %asi, %l5; \
lduwa [%sp + 0x18] %asi, %l6; \
lduwa [%sp + 0x1c] %asi, %l7; \
lduwa [%sp + 0x20] %asi, %i0; \
lduwa [%sp + 0x24] %asi, %i1; \
lduwa [%sp + 0x28] %asi, %i2; \
lduwa [%sp + 0x2c] %asi, %i3; \
lduwa [%sp + 0x30] %asi, %i4; \
lduwa [%sp + 0x34] %asi, %i5; \
lduwa [%sp + 0x38] %asi, %i6; \
lduwa [%sp + 0x3c] %asi, %i7; \
ba,pt %xcc, user_rtt_pre_restore; \
restored; \
nop; nop; nop; nop; nop; \
nop; nop; nop; \
ba,a,pt %xcc, user_rtt_fill_fixup_dax; \
ba,a,pt %xcc, user_rtt_fill_fixup_mna; \
ba,a,pt %xcc, user_rtt_fill_fixup;
#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP)
#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP)
#define FILL_3_NORMAL FILL_0_NORMAL
#define FILL_4_NORMAL FILL_0_NORMAL
#define FILL_5_NORMAL FILL_0_NORMAL
#define FILL_6_NORMAL FILL_0_NORMAL
#define FILL_7_NORMAL FILL_0_NORMAL
#define FILL_0_OTHER FILL_0_NORMAL
#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS)
#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS)
#define FILL_3_OTHER FILL_3_NORMAL
#define FILL_4_OTHER FILL_4_NORMAL
#define FILL_5_OTHER FILL_5_NORMAL
#define FILL_6_OTHER FILL_6_NORMAL
#define FILL_7_OTHER FILL_7_NORMAL
#endif /* !(_SPARC64_TTABLE_H) */