mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 19:51:01 +07:00
786a72d791
Lots of changes as usual, so I'm trying to be brief here. Most of the new hardware support has the respective driver changes merged through other trees or has had it available for a while, so this is where things come together. We get a DT descriptions for a couple of new SoCs, all of them variants of other chips we already support, and usually coming with a new evaluation board: - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices - Qualcomm MDM9615 LTE baseband - NXP imx6ull, the latest and smallest i.MX6 application processor variant - Renesas RZ/G (r8a7743 and r8a7745) application processors - Rockchip PX3, a variant of the rk3188 chip used in Android tablets - Rockchip rk1108 single-core application processor - ST stm32f746 Cortex-M7 based microcontroller - TI DRA71x automotive processors These are commercially available consumer platforms we now support: - Motorola Droid 4 (xt894) mobile phone - Rikomagic MK808 Android TV stick based on Rockchips rx3066 - Cloud Engines PogoPlug v3 based on OX820 - Various Broadcom based wireless devices: - Netgear R8500 router - Tenda AC9 router - TP-LINK Archer C9 V1 - Luxul XAP-1510 Access point - Turris Omnia open hardware router based on Armada 385 And a couple of new boards targeted at developers, makers or industrial integration: - Macnica Sodia development platform for Altera socfpga (Cyclone V) - MicroZed board based on Xilinx Zynq FPGA platforms - TOPEET itop/elite based on exynos4412 - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615 - NextThing CHIP Pro gadget - NanoPi M1 development board - AM571x-IDK industrial board based on TI AM5718 - i.MX6SX UDOO Neo - Boundary Devices Nitrogen6_SOM2 (i.MX6) - Engicam i.CoreM6 - Grinn i.MX6UL liteSOM/liteBoard - Toradex Colibri iMX6 module Other changes: - added peripherals on renesas, davinci, stm32f429, uniphier, sti, mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm, mvebu, allwinner, broadcom, exynos, zynq - Continued fixes for W=1 dtc warnings - The old STiH415/416 SoC support gets removed, these never made it into products and have served their purpose in the kernel as a template for teh newer chips from ST - The exynos4415 dtsi file is removed as nothing uses it. - Intel PXA25x can now be booted using devicetree Conflicts: arch/arm/boot/dts/r8a*.dtsi: a node was added the clk tree, keep both sides and watch out for git dropping the required '};' at the end of each side. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAWFMZHGCrR//JCVInAQKQ6A/+Og42qy1rhL3cfHiSsT7e5giQNVSFY7Cm Z06R83AEv6HDMTNzyiJr5udRGOhm40qIoe92fhVJSRF7F6o/GbCQ7YOyU4KdQELg caqRCe1Nq6RT0RYU0m6xVyv/ox0JTNEaB+TcvD1x4pgUQNo9sSBfiXpTzOKhLhqs zmsfpNpj8v188Iofoju3WtwN26riJ7P4QdYIaNaH4qNQgoQbMbQICDwnpSsNJY+x MSlNrbtYqfz6vc5fqa0mtfhF6wIFxuRnTgSLi9skWZ2l/fkn4ljF3RhN1Z86TYPv CYsqDu+DF0YNxFrht3BAK6WTe2PdCnMNLNnMhYC6NDQ8YG1tbwvXQFM1KVanRvxx hXP4Nt2sZYiqA4v8joFPgp9gnyBMdhtJEtWSmHwCY0RFObySJR4I1GY7igh02HUJ gxlmOYcmklzLiyXvfjdDvg0sCV1tBhaBKTLYxF7lVCzG2QaR22Le+p3o+SWm+e+V Ruc9l/iwHaeasNnbAkDEiEyi1FobtuEeTSZnKaXfKX8WuKVZLJrCEm7WiRIsj0Ww vJ9ABVft7PEv/Ov3fbKBWON4vxKTBBgHuEDcbIsp19w4BSH1WJf5bGXIm7QeA3Z9 aD+DtA5W5ExIjMQR2+qgz/BBIzVVVVvG8DEcdcCtc3JGRJll5PadShLdqKjVIerc SpsxqCKoRCI= =wJt3 -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "Lots of changes as usual, so I'm trying to be brief here. Most of the new hardware support has the respective driver changes merged through other trees or has had it available for a while, so this is where things come together. We get a DT descriptions for a couple of new SoCs, all of them variants of other chips we already support, and usually coming with a new evaluation board: - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices - Qualcomm MDM9615 LTE baseband - NXP imx6ull, the latest and smallest i.MX6 application processor variant - Renesas RZ/G (r8a7743 and r8a7745) application processors - Rockchip PX3, a variant of the rk3188 chip used in Android tablets - Rockchip rk1108 single-core application processor - ST stm32f746 Cortex-M7 based microcontroller - TI DRA71x automotive processors These are commercially available consumer platforms we now support: - Motorola Droid 4 (xt894) mobile phone - Rikomagic MK808 Android TV stick based on Rockchips rx3066 - Cloud Engines PogoPlug v3 based on OX820 - Various Broadcom based wireless devices: - Netgear R8500 router - Tenda AC9 router - TP-LINK Archer C9 V1 - Luxul XAP-1510 Access point - Turris Omnia open hardware router based on Armada 385 And a couple of new boards targeted at developers, makers or industrial integration: - Macnica Sodia development platform for Altera socfpga (Cyclone V) - MicroZed board based on Xilinx Zynq FPGA platforms - TOPEET itop/elite based on exynos4412 - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615 - NextThing CHIP Pro gadget - NanoPi M1 development board - AM571x-IDK industrial board based on TI AM5718 - i.MX6SX UDOO Neo - Boundary Devices Nitrogen6_SOM2 (i.MX6) - Engicam i.CoreM6 - Grinn i.MX6UL liteSOM/liteBoard - Toradex Colibri iMX6 module Other changes: - added peripherals on renesas, davinci, stm32f429, uniphier, sti, mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm, mvebu, allwinner, broadcom, exynos, zynq - Continued fixes for W=1 dtc warnings - The old STiH415/416 SoC support gets removed, these never made it into products and have served their purpose in the kernel as a template for teh newer chips from ST - The exynos4415 dtsi file is removed as nothing uses it. - Intel PXA25x can now be booted using devicetree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits) arm: dts: zynq: Add MicroZed board support ARM: dts: da850: enable high speed for mmc ARM: dts: da850: Add node for pullup/pulldown pinconf ARM: dts: da850: enable memctrl and mstpri nodes per board ARM: dts: da850-lcdk: Add ethernet0 alias to DT ARM: dts: artpec: add pcie support ARM: dts: add support for Turris Omnia devicetree: Add vendor prefix for CZ.NIC ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node ARM: dts: berlin2q-marvell-dmp: fix regulators' name ARM: dts: Add xo to sdhc clock node on qcom platforms ARM: dts: r8a7794: Add device node for PRR ARM: dts: r8a7793: Add device node for PRR ARM: dts: r8a7792: Add device node for PRR ARM: dts: r8a7791: Add device node for PRR ARM: dts: r8a7790: Add device node for PRR ARM: dts: r8a7779: Add device node for PRR ARM: dts: r8a73a4: Add device node for PRR ARM: dts: sk-rzg1e: add Ether support ARM: dts: sk-rzg1e: initial device tree ...
1106 lines
29 KiB
C
1106 lines
29 KiB
C
/*
|
|
* Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO)
|
|
*
|
|
* Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
|
|
*
|
|
* This driver is inspired by:
|
|
* pinctrl-nomadik.c, please see original file for copyright information
|
|
* pinctrl-tegra.c, please see original file for copyright information
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/bitmap.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdesc.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/types.h>
|
|
|
|
#define MODULE_NAME "pinctrl-bcm2835"
|
|
#define BCM2835_NUM_GPIOS 54
|
|
#define BCM2835_NUM_BANKS 2
|
|
#define BCM2835_NUM_IRQS 3
|
|
|
|
#define BCM2835_PIN_BITMAP_SZ \
|
|
DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
|
|
|
|
/* GPIO register offsets */
|
|
#define GPFSEL0 0x0 /* Function Select */
|
|
#define GPSET0 0x1c /* Pin Output Set */
|
|
#define GPCLR0 0x28 /* Pin Output Clear */
|
|
#define GPLEV0 0x34 /* Pin Level */
|
|
#define GPEDS0 0x40 /* Pin Event Detect Status */
|
|
#define GPREN0 0x4c /* Pin Rising Edge Detect Enable */
|
|
#define GPFEN0 0x58 /* Pin Falling Edge Detect Enable */
|
|
#define GPHEN0 0x64 /* Pin High Detect Enable */
|
|
#define GPLEN0 0x70 /* Pin Low Detect Enable */
|
|
#define GPAREN0 0x7c /* Pin Async Rising Edge Detect */
|
|
#define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */
|
|
#define GPPUD 0x94 /* Pin Pull-up/down Enable */
|
|
#define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */
|
|
|
|
#define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4))
|
|
#define FSEL_SHIFT(p) (((p) % 10) * 3)
|
|
#define GPIO_REG_OFFSET(p) ((p) / 32)
|
|
#define GPIO_REG_SHIFT(p) ((p) % 32)
|
|
|
|
enum bcm2835_pinconf_param {
|
|
/* argument: bcm2835_pinconf_pull */
|
|
BCM2835_PINCONF_PARAM_PULL,
|
|
};
|
|
|
|
#define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
|
|
#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
|
|
#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
|
|
|
|
struct bcm2835_pinctrl {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
int irq[BCM2835_NUM_IRQS];
|
|
|
|
/* note: locking assumes each bank will have its own unsigned long */
|
|
unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
|
|
unsigned int irq_type[BCM2835_NUM_GPIOS];
|
|
|
|
struct pinctrl_dev *pctl_dev;
|
|
struct gpio_chip gpio_chip;
|
|
struct pinctrl_gpio_range gpio_range;
|
|
|
|
int irq_group[BCM2835_NUM_IRQS];
|
|
spinlock_t irq_lock[BCM2835_NUM_BANKS];
|
|
};
|
|
|
|
/* pins are just named GPIO0..GPIO53 */
|
|
#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
|
|
static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
|
|
BCM2835_GPIO_PIN(0),
|
|
BCM2835_GPIO_PIN(1),
|
|
BCM2835_GPIO_PIN(2),
|
|
BCM2835_GPIO_PIN(3),
|
|
BCM2835_GPIO_PIN(4),
|
|
BCM2835_GPIO_PIN(5),
|
|
BCM2835_GPIO_PIN(6),
|
|
BCM2835_GPIO_PIN(7),
|
|
BCM2835_GPIO_PIN(8),
|
|
BCM2835_GPIO_PIN(9),
|
|
BCM2835_GPIO_PIN(10),
|
|
BCM2835_GPIO_PIN(11),
|
|
BCM2835_GPIO_PIN(12),
|
|
BCM2835_GPIO_PIN(13),
|
|
BCM2835_GPIO_PIN(14),
|
|
BCM2835_GPIO_PIN(15),
|
|
BCM2835_GPIO_PIN(16),
|
|
BCM2835_GPIO_PIN(17),
|
|
BCM2835_GPIO_PIN(18),
|
|
BCM2835_GPIO_PIN(19),
|
|
BCM2835_GPIO_PIN(20),
|
|
BCM2835_GPIO_PIN(21),
|
|
BCM2835_GPIO_PIN(22),
|
|
BCM2835_GPIO_PIN(23),
|
|
BCM2835_GPIO_PIN(24),
|
|
BCM2835_GPIO_PIN(25),
|
|
BCM2835_GPIO_PIN(26),
|
|
BCM2835_GPIO_PIN(27),
|
|
BCM2835_GPIO_PIN(28),
|
|
BCM2835_GPIO_PIN(29),
|
|
BCM2835_GPIO_PIN(30),
|
|
BCM2835_GPIO_PIN(31),
|
|
BCM2835_GPIO_PIN(32),
|
|
BCM2835_GPIO_PIN(33),
|
|
BCM2835_GPIO_PIN(34),
|
|
BCM2835_GPIO_PIN(35),
|
|
BCM2835_GPIO_PIN(36),
|
|
BCM2835_GPIO_PIN(37),
|
|
BCM2835_GPIO_PIN(38),
|
|
BCM2835_GPIO_PIN(39),
|
|
BCM2835_GPIO_PIN(40),
|
|
BCM2835_GPIO_PIN(41),
|
|
BCM2835_GPIO_PIN(42),
|
|
BCM2835_GPIO_PIN(43),
|
|
BCM2835_GPIO_PIN(44),
|
|
BCM2835_GPIO_PIN(45),
|
|
BCM2835_GPIO_PIN(46),
|
|
BCM2835_GPIO_PIN(47),
|
|
BCM2835_GPIO_PIN(48),
|
|
BCM2835_GPIO_PIN(49),
|
|
BCM2835_GPIO_PIN(50),
|
|
BCM2835_GPIO_PIN(51),
|
|
BCM2835_GPIO_PIN(52),
|
|
BCM2835_GPIO_PIN(53),
|
|
};
|
|
|
|
/* one pin per group */
|
|
static const char * const bcm2835_gpio_groups[] = {
|
|
"gpio0",
|
|
"gpio1",
|
|
"gpio2",
|
|
"gpio3",
|
|
"gpio4",
|
|
"gpio5",
|
|
"gpio6",
|
|
"gpio7",
|
|
"gpio8",
|
|
"gpio9",
|
|
"gpio10",
|
|
"gpio11",
|
|
"gpio12",
|
|
"gpio13",
|
|
"gpio14",
|
|
"gpio15",
|
|
"gpio16",
|
|
"gpio17",
|
|
"gpio18",
|
|
"gpio19",
|
|
"gpio20",
|
|
"gpio21",
|
|
"gpio22",
|
|
"gpio23",
|
|
"gpio24",
|
|
"gpio25",
|
|
"gpio26",
|
|
"gpio27",
|
|
"gpio28",
|
|
"gpio29",
|
|
"gpio30",
|
|
"gpio31",
|
|
"gpio32",
|
|
"gpio33",
|
|
"gpio34",
|
|
"gpio35",
|
|
"gpio36",
|
|
"gpio37",
|
|
"gpio38",
|
|
"gpio39",
|
|
"gpio40",
|
|
"gpio41",
|
|
"gpio42",
|
|
"gpio43",
|
|
"gpio44",
|
|
"gpio45",
|
|
"gpio46",
|
|
"gpio47",
|
|
"gpio48",
|
|
"gpio49",
|
|
"gpio50",
|
|
"gpio51",
|
|
"gpio52",
|
|
"gpio53",
|
|
};
|
|
|
|
enum bcm2835_fsel {
|
|
BCM2835_FSEL_GPIO_IN = 0,
|
|
BCM2835_FSEL_GPIO_OUT = 1,
|
|
BCM2835_FSEL_ALT0 = 4,
|
|
BCM2835_FSEL_ALT1 = 5,
|
|
BCM2835_FSEL_ALT2 = 6,
|
|
BCM2835_FSEL_ALT3 = 7,
|
|
BCM2835_FSEL_ALT4 = 3,
|
|
BCM2835_FSEL_ALT5 = 2,
|
|
BCM2835_FSEL_COUNT = 8,
|
|
BCM2835_FSEL_MASK = 0x7,
|
|
};
|
|
|
|
static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = {
|
|
[BCM2835_FSEL_GPIO_IN] = "gpio_in",
|
|
[BCM2835_FSEL_GPIO_OUT] = "gpio_out",
|
|
[BCM2835_FSEL_ALT0] = "alt0",
|
|
[BCM2835_FSEL_ALT1] = "alt1",
|
|
[BCM2835_FSEL_ALT2] = "alt2",
|
|
[BCM2835_FSEL_ALT3] = "alt3",
|
|
[BCM2835_FSEL_ALT4] = "alt4",
|
|
[BCM2835_FSEL_ALT5] = "alt5",
|
|
};
|
|
|
|
static const char * const irq_type_names[] = {
|
|
[IRQ_TYPE_NONE] = "none",
|
|
[IRQ_TYPE_EDGE_RISING] = "edge-rising",
|
|
[IRQ_TYPE_EDGE_FALLING] = "edge-falling",
|
|
[IRQ_TYPE_EDGE_BOTH] = "edge-both",
|
|
[IRQ_TYPE_LEVEL_HIGH] = "level-high",
|
|
[IRQ_TYPE_LEVEL_LOW] = "level-low",
|
|
};
|
|
|
|
static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg)
|
|
{
|
|
return readl(pc->base + reg);
|
|
}
|
|
|
|
static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg,
|
|
u32 val)
|
|
{
|
|
writel(val, pc->base + reg);
|
|
}
|
|
|
|
static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg,
|
|
unsigned bit)
|
|
{
|
|
reg += GPIO_REG_OFFSET(bit) * 4;
|
|
return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1;
|
|
}
|
|
|
|
/* note NOT a read/modify/write cycle */
|
|
static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc,
|
|
unsigned reg, unsigned bit)
|
|
{
|
|
reg += GPIO_REG_OFFSET(bit) * 4;
|
|
bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit)));
|
|
}
|
|
|
|
static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get(
|
|
struct bcm2835_pinctrl *pc, unsigned pin)
|
|
{
|
|
u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
|
|
enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
|
|
|
|
dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin,
|
|
bcm2835_functions[status]);
|
|
|
|
return status;
|
|
}
|
|
|
|
static inline void bcm2835_pinctrl_fsel_set(
|
|
struct bcm2835_pinctrl *pc, unsigned pin,
|
|
enum bcm2835_fsel fsel)
|
|
{
|
|
u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
|
|
enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
|
|
|
|
dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin,
|
|
bcm2835_functions[cur]);
|
|
|
|
if (cur == fsel)
|
|
return;
|
|
|
|
if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) {
|
|
/* always transition through GPIO_IN */
|
|
val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
|
|
val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin);
|
|
|
|
dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin,
|
|
bcm2835_functions[BCM2835_FSEL_GPIO_IN]);
|
|
bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
|
|
}
|
|
|
|
val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
|
|
val |= fsel << FSEL_SHIFT(pin);
|
|
|
|
dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin,
|
|
bcm2835_functions[fsel]);
|
|
bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
|
|
}
|
|
|
|
static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return pinctrl_gpio_direction_input(chip->base + offset);
|
|
}
|
|
|
|
static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
|
|
|
|
return bcm2835_gpio_get_bit(pc, GPLEV0, offset);
|
|
}
|
|
|
|
static int bcm2835_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
|
|
enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
|
|
|
|
/* Alternative function doesn't clearly provide a direction */
|
|
if (fsel > BCM2835_FSEL_GPIO_OUT)
|
|
return -EINVAL;
|
|
|
|
return (fsel == BCM2835_FSEL_GPIO_IN);
|
|
}
|
|
|
|
static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
|
|
|
|
bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset);
|
|
}
|
|
|
|
static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
bcm2835_gpio_set(chip, offset, value);
|
|
return pinctrl_gpio_direction_output(chip->base + offset);
|
|
}
|
|
|
|
static struct gpio_chip bcm2835_gpio_chip = {
|
|
.label = MODULE_NAME,
|
|
.owner = THIS_MODULE,
|
|
.request = gpiochip_generic_request,
|
|
.free = gpiochip_generic_free,
|
|
.direction_input = bcm2835_gpio_direction_input,
|
|
.direction_output = bcm2835_gpio_direction_output,
|
|
.get_direction = bcm2835_gpio_get_direction,
|
|
.get = bcm2835_gpio_get,
|
|
.set = bcm2835_gpio_set,
|
|
.base = -1,
|
|
.ngpio = BCM2835_NUM_GPIOS,
|
|
.can_sleep = false,
|
|
};
|
|
|
|
static void bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc,
|
|
unsigned int bank, u32 mask)
|
|
{
|
|
unsigned long events;
|
|
unsigned offset;
|
|
unsigned gpio;
|
|
unsigned int type;
|
|
|
|
events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
|
|
events &= mask;
|
|
events &= pc->enabled_irq_map[bank];
|
|
for_each_set_bit(offset, &events, 32) {
|
|
gpio = (32 * bank) + offset;
|
|
/* FIXME: no clue why the code looks up the type here */
|
|
type = pc->irq_type[gpio];
|
|
|
|
generic_handle_irq(irq_linear_revmap(pc->gpio_chip.irqdomain,
|
|
gpio));
|
|
}
|
|
}
|
|
|
|
static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct gpio_chip *chip = irq_desc_get_handler_data(desc);
|
|
struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
|
|
struct irq_chip *host_chip = irq_desc_get_chip(desc);
|
|
int irq = irq_desc_get_irq(desc);
|
|
int group;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pc->irq); i++) {
|
|
if (pc->irq[i] == irq) {
|
|
group = pc->irq_group[i];
|
|
break;
|
|
}
|
|
}
|
|
/* This should not happen, every IRQ has a bank */
|
|
if (i == ARRAY_SIZE(pc->irq))
|
|
BUG();
|
|
|
|
chained_irq_enter(host_chip, desc);
|
|
|
|
switch (group) {
|
|
case 0: /* IRQ0 covers GPIOs 0-27 */
|
|
bcm2835_gpio_irq_handle_bank(pc, 0, 0x0fffffff);
|
|
break;
|
|
case 1: /* IRQ1 covers GPIOs 28-45 */
|
|
bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000);
|
|
bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff);
|
|
break;
|
|
case 2: /* IRQ2 covers GPIOs 46-53 */
|
|
bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000);
|
|
break;
|
|
}
|
|
|
|
chained_irq_exit(host_chip, desc);
|
|
}
|
|
|
|
static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
|
|
unsigned reg, unsigned offset, bool enable)
|
|
{
|
|
u32 value;
|
|
reg += GPIO_REG_OFFSET(offset) * 4;
|
|
value = bcm2835_gpio_rd(pc, reg);
|
|
if (enable)
|
|
value |= BIT(GPIO_REG_SHIFT(offset));
|
|
else
|
|
value &= ~(BIT(GPIO_REG_SHIFT(offset)));
|
|
bcm2835_gpio_wr(pc, reg, value);
|
|
}
|
|
|
|
/* fast path for IRQ handler */
|
|
static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
|
|
unsigned offset, bool enable)
|
|
{
|
|
switch (pc->irq_type[offset]) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
__bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
__bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
__bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
|
|
__bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
__bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable);
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
__bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void bcm2835_gpio_irq_enable(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
|
|
unsigned gpio = irqd_to_hwirq(data);
|
|
unsigned offset = GPIO_REG_SHIFT(gpio);
|
|
unsigned bank = GPIO_REG_OFFSET(gpio);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pc->irq_lock[bank], flags);
|
|
set_bit(offset, &pc->enabled_irq_map[bank]);
|
|
bcm2835_gpio_irq_config(pc, gpio, true);
|
|
spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
|
|
}
|
|
|
|
static void bcm2835_gpio_irq_disable(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
|
|
unsigned gpio = irqd_to_hwirq(data);
|
|
unsigned offset = GPIO_REG_SHIFT(gpio);
|
|
unsigned bank = GPIO_REG_OFFSET(gpio);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pc->irq_lock[bank], flags);
|
|
bcm2835_gpio_irq_config(pc, gpio, false);
|
|
/* Clear events that were latched prior to clearing event sources */
|
|
bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
|
|
clear_bit(offset, &pc->enabled_irq_map[bank]);
|
|
spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
|
|
}
|
|
|
|
static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc,
|
|
unsigned offset, unsigned int type)
|
|
{
|
|
switch (type) {
|
|
case IRQ_TYPE_NONE:
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
pc->irq_type[offset] = type;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* slower path for reconfiguring IRQ type */
|
|
static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc,
|
|
unsigned offset, unsigned int type)
|
|
{
|
|
switch (type) {
|
|
case IRQ_TYPE_NONE:
|
|
if (pc->irq_type[offset] != type) {
|
|
bcm2835_gpio_irq_config(pc, offset, false);
|
|
pc->irq_type[offset] = type;
|
|
}
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
|
|
/* RISING already enabled, disable FALLING */
|
|
pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
|
|
bcm2835_gpio_irq_config(pc, offset, false);
|
|
pc->irq_type[offset] = type;
|
|
} else if (pc->irq_type[offset] != type) {
|
|
bcm2835_gpio_irq_config(pc, offset, false);
|
|
pc->irq_type[offset] = type;
|
|
bcm2835_gpio_irq_config(pc, offset, true);
|
|
}
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
|
|
/* FALLING already enabled, disable RISING */
|
|
pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
|
|
bcm2835_gpio_irq_config(pc, offset, false);
|
|
pc->irq_type[offset] = type;
|
|
} else if (pc->irq_type[offset] != type) {
|
|
bcm2835_gpio_irq_config(pc, offset, false);
|
|
pc->irq_type[offset] = type;
|
|
bcm2835_gpio_irq_config(pc, offset, true);
|
|
}
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) {
|
|
/* RISING already enabled, enable FALLING too */
|
|
pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
|
|
bcm2835_gpio_irq_config(pc, offset, true);
|
|
pc->irq_type[offset] = type;
|
|
} else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) {
|
|
/* FALLING already enabled, enable RISING too */
|
|
pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
|
|
bcm2835_gpio_irq_config(pc, offset, true);
|
|
pc->irq_type[offset] = type;
|
|
} else if (pc->irq_type[offset] != type) {
|
|
bcm2835_gpio_irq_config(pc, offset, false);
|
|
pc->irq_type[offset] = type;
|
|
bcm2835_gpio_irq_config(pc, offset, true);
|
|
}
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
if (pc->irq_type[offset] != type) {
|
|
bcm2835_gpio_irq_config(pc, offset, false);
|
|
pc->irq_type[offset] = type;
|
|
bcm2835_gpio_irq_config(pc, offset, true);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
|
|
unsigned gpio = irqd_to_hwirq(data);
|
|
unsigned offset = GPIO_REG_SHIFT(gpio);
|
|
unsigned bank = GPIO_REG_OFFSET(gpio);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&pc->irq_lock[bank], flags);
|
|
|
|
if (test_bit(offset, &pc->enabled_irq_map[bank]))
|
|
ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type);
|
|
else
|
|
ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type);
|
|
|
|
if (type & IRQ_TYPE_EDGE_BOTH)
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
else
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
|
|
spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void bcm2835_gpio_irq_ack(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
|
|
unsigned gpio = irqd_to_hwirq(data);
|
|
|
|
bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
|
|
}
|
|
|
|
static struct irq_chip bcm2835_gpio_irq_chip = {
|
|
.name = MODULE_NAME,
|
|
.irq_enable = bcm2835_gpio_irq_enable,
|
|
.irq_disable = bcm2835_gpio_irq_disable,
|
|
.irq_set_type = bcm2835_gpio_irq_set_type,
|
|
.irq_ack = bcm2835_gpio_irq_ack,
|
|
.irq_mask = bcm2835_gpio_irq_disable,
|
|
.irq_unmask = bcm2835_gpio_irq_enable,
|
|
};
|
|
|
|
static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
return ARRAY_SIZE(bcm2835_gpio_groups);
|
|
}
|
|
|
|
static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
return bcm2835_gpio_groups[selector];
|
|
}
|
|
|
|
static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
*pins = &bcm2835_gpio_pins[selector].number;
|
|
*num_pins = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
|
|
struct seq_file *s,
|
|
unsigned offset)
|
|
{
|
|
struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
struct gpio_chip *chip = &pc->gpio_chip;
|
|
enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
|
|
const char *fname = bcm2835_functions[fsel];
|
|
int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset);
|
|
int irq = irq_find_mapping(chip->irqdomain, offset);
|
|
|
|
seq_printf(s, "function %s in %s; irq %d (%s)",
|
|
fname, value ? "hi" : "lo",
|
|
irq, irq_type_names[pc->irq_type[offset]]);
|
|
}
|
|
|
|
static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_map *maps, unsigned num_maps)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < num_maps; i++)
|
|
if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
|
|
kfree(maps[i].data.configs.configs);
|
|
|
|
kfree(maps);
|
|
}
|
|
|
|
static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc,
|
|
struct device_node *np, u32 pin, u32 fnum,
|
|
struct pinctrl_map **maps)
|
|
{
|
|
struct pinctrl_map *map = *maps;
|
|
|
|
if (fnum >= ARRAY_SIZE(bcm2835_functions)) {
|
|
dev_err(pc->dev, "%s: invalid brcm,function %d\n",
|
|
of_node_full_name(np), fnum);
|
|
return -EINVAL;
|
|
}
|
|
|
|
map->type = PIN_MAP_TYPE_MUX_GROUP;
|
|
map->data.mux.group = bcm2835_gpio_groups[pin];
|
|
map->data.mux.function = bcm2835_functions[fnum];
|
|
(*maps)++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc,
|
|
struct device_node *np, u32 pin, u32 pull,
|
|
struct pinctrl_map **maps)
|
|
{
|
|
struct pinctrl_map *map = *maps;
|
|
unsigned long *configs;
|
|
|
|
if (pull > 2) {
|
|
dev_err(pc->dev, "%s: invalid brcm,pull %d\n",
|
|
of_node_full_name(np), pull);
|
|
return -EINVAL;
|
|
}
|
|
|
|
configs = kzalloc(sizeof(*configs), GFP_KERNEL);
|
|
if (!configs)
|
|
return -ENOMEM;
|
|
configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull);
|
|
|
|
map->type = PIN_MAP_TYPE_CONFIGS_PIN;
|
|
map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name;
|
|
map->data.configs.configs = configs;
|
|
map->data.configs.num_configs = 1;
|
|
(*maps)++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
|
|
struct device_node *np,
|
|
struct pinctrl_map **map, unsigned *num_maps)
|
|
{
|
|
struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
struct property *pins, *funcs, *pulls;
|
|
int num_pins, num_funcs, num_pulls, maps_per_pin;
|
|
struct pinctrl_map *maps, *cur_map;
|
|
int i, err;
|
|
u32 pin, func, pull;
|
|
|
|
pins = of_find_property(np, "brcm,pins", NULL);
|
|
if (!pins) {
|
|
dev_err(pc->dev, "%s: missing brcm,pins property\n",
|
|
of_node_full_name(np));
|
|
return -EINVAL;
|
|
}
|
|
|
|
funcs = of_find_property(np, "brcm,function", NULL);
|
|
pulls = of_find_property(np, "brcm,pull", NULL);
|
|
|
|
if (!funcs && !pulls) {
|
|
dev_err(pc->dev,
|
|
"%s: neither brcm,function nor brcm,pull specified\n",
|
|
of_node_full_name(np));
|
|
return -EINVAL;
|
|
}
|
|
|
|
num_pins = pins->length / 4;
|
|
num_funcs = funcs ? (funcs->length / 4) : 0;
|
|
num_pulls = pulls ? (pulls->length / 4) : 0;
|
|
|
|
if (num_funcs > 1 && num_funcs != num_pins) {
|
|
dev_err(pc->dev,
|
|
"%s: brcm,function must have 1 or %d entries\n",
|
|
of_node_full_name(np), num_pins);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (num_pulls > 1 && num_pulls != num_pins) {
|
|
dev_err(pc->dev,
|
|
"%s: brcm,pull must have 1 or %d entries\n",
|
|
of_node_full_name(np), num_pins);
|
|
return -EINVAL;
|
|
}
|
|
|
|
maps_per_pin = 0;
|
|
if (num_funcs)
|
|
maps_per_pin++;
|
|
if (num_pulls)
|
|
maps_per_pin++;
|
|
cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps),
|
|
GFP_KERNEL);
|
|
if (!maps)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num_pins; i++) {
|
|
err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
|
|
if (err)
|
|
goto out;
|
|
if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
|
|
dev_err(pc->dev, "%s: invalid brcm,pins value %d\n",
|
|
of_node_full_name(np), pin);
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if (num_funcs) {
|
|
err = of_property_read_u32_index(np, "brcm,function",
|
|
(num_funcs > 1) ? i : 0, &func);
|
|
if (err)
|
|
goto out;
|
|
err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin,
|
|
func, &cur_map);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
if (num_pulls) {
|
|
err = of_property_read_u32_index(np, "brcm,pull",
|
|
(num_pulls > 1) ? i : 0, &pull);
|
|
if (err)
|
|
goto out;
|
|
err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin,
|
|
pull, &cur_map);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
*map = maps;
|
|
*num_maps = num_pins * maps_per_pin;
|
|
|
|
return 0;
|
|
|
|
out:
|
|
bcm2835_pctl_dt_free_map(pctldev, maps, num_pins * maps_per_pin);
|
|
return err;
|
|
}
|
|
|
|
static const struct pinctrl_ops bcm2835_pctl_ops = {
|
|
.get_groups_count = bcm2835_pctl_get_groups_count,
|
|
.get_group_name = bcm2835_pctl_get_group_name,
|
|
.get_group_pins = bcm2835_pctl_get_group_pins,
|
|
.pin_dbg_show = bcm2835_pctl_pin_dbg_show,
|
|
.dt_node_to_map = bcm2835_pctl_dt_node_to_map,
|
|
.dt_free_map = bcm2835_pctl_dt_free_map,
|
|
};
|
|
|
|
static int bcm2835_pmx_free(struct pinctrl_dev *pctldev,
|
|
unsigned offset)
|
|
{
|
|
struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
/* disable by setting to GPIO_IN */
|
|
bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
|
|
return 0;
|
|
}
|
|
|
|
static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
return BCM2835_FSEL_COUNT;
|
|
}
|
|
|
|
static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
return bcm2835_functions[selector];
|
|
}
|
|
|
|
static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
const char * const **groups,
|
|
unsigned * const num_groups)
|
|
{
|
|
/* every pin can do every function */
|
|
*groups = bcm2835_gpio_groups;
|
|
*num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm2835_pmx_set(struct pinctrl_dev *pctldev,
|
|
unsigned func_selector,
|
|
unsigned group_selector)
|
|
{
|
|
struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
/* disable by setting to GPIO_IN */
|
|
bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
|
|
}
|
|
|
|
static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset,
|
|
bool input)
|
|
{
|
|
struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
enum bcm2835_fsel fsel = input ?
|
|
BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT;
|
|
|
|
bcm2835_pinctrl_fsel_set(pc, offset, fsel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinmux_ops bcm2835_pmx_ops = {
|
|
.free = bcm2835_pmx_free,
|
|
.get_functions_count = bcm2835_pmx_get_functions_count,
|
|
.get_function_name = bcm2835_pmx_get_function_name,
|
|
.get_function_groups = bcm2835_pmx_get_function_groups,
|
|
.set_mux = bcm2835_pmx_set,
|
|
.gpio_disable_free = bcm2835_pmx_gpio_disable_free,
|
|
.gpio_set_direction = bcm2835_pmx_gpio_set_direction,
|
|
};
|
|
|
|
static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev,
|
|
unsigned pin, unsigned long *config)
|
|
{
|
|
/* No way to read back config in HW */
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
|
|
unsigned pin, unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
|
enum bcm2835_pinconf_param param;
|
|
u16 arg;
|
|
u32 off, bit;
|
|
int i;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]);
|
|
arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]);
|
|
|
|
if (param != BCM2835_PINCONF_PARAM_PULL)
|
|
return -EINVAL;
|
|
|
|
off = GPIO_REG_OFFSET(pin);
|
|
bit = GPIO_REG_SHIFT(pin);
|
|
|
|
bcm2835_gpio_wr(pc, GPPUD, arg & 3);
|
|
/*
|
|
* BCM2835 datasheet say to wait 150 cycles, but not of what.
|
|
* But the VideoCore firmware delay for this operation
|
|
* based nearly on the same amount of VPU cycles and this clock
|
|
* runs at 250 MHz.
|
|
*/
|
|
udelay(1);
|
|
bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit));
|
|
udelay(1);
|
|
bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0);
|
|
} /* for each config */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops bcm2835_pinconf_ops = {
|
|
.pin_config_get = bcm2835_pinconf_get,
|
|
.pin_config_set = bcm2835_pinconf_set,
|
|
};
|
|
|
|
static struct pinctrl_desc bcm2835_pinctrl_desc = {
|
|
.name = MODULE_NAME,
|
|
.pins = bcm2835_gpio_pins,
|
|
.npins = ARRAY_SIZE(bcm2835_gpio_pins),
|
|
.pctlops = &bcm2835_pctl_ops,
|
|
.pmxops = &bcm2835_pmx_ops,
|
|
.confops = &bcm2835_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
|
|
.name = MODULE_NAME,
|
|
.npins = BCM2835_NUM_GPIOS,
|
|
};
|
|
|
|
static int bcm2835_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct bcm2835_pinctrl *pc;
|
|
struct resource iomem;
|
|
int err, i;
|
|
BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
|
|
BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
|
|
|
|
pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
|
|
if (!pc)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, pc);
|
|
pc->dev = dev;
|
|
|
|
err = of_address_to_resource(np, 0, &iomem);
|
|
if (err) {
|
|
dev_err(dev, "could not get IO memory\n");
|
|
return err;
|
|
}
|
|
|
|
pc->base = devm_ioremap_resource(dev, &iomem);
|
|
if (IS_ERR(pc->base))
|
|
return PTR_ERR(pc->base);
|
|
|
|
pc->gpio_chip = bcm2835_gpio_chip;
|
|
pc->gpio_chip.parent = dev;
|
|
pc->gpio_chip.of_node = np;
|
|
|
|
for (i = 0; i < BCM2835_NUM_BANKS; i++) {
|
|
unsigned long events;
|
|
unsigned offset;
|
|
|
|
/* clear event detection flags */
|
|
bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
|
|
bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0);
|
|
bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0);
|
|
bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0);
|
|
bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0);
|
|
bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0);
|
|
|
|
/* clear all the events */
|
|
events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4);
|
|
for_each_set_bit(offset, &events, 32)
|
|
bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
|
|
|
|
spin_lock_init(&pc->irq_lock[i]);
|
|
}
|
|
|
|
err = gpiochip_add_data(&pc->gpio_chip, pc);
|
|
if (err) {
|
|
dev_err(dev, "could not add GPIO chip\n");
|
|
return err;
|
|
}
|
|
|
|
err = gpiochip_irqchip_add(&pc->gpio_chip, &bcm2835_gpio_irq_chip,
|
|
0, handle_level_irq, IRQ_TYPE_NONE);
|
|
if (err) {
|
|
dev_info(dev, "could not add irqchip\n");
|
|
return err;
|
|
}
|
|
|
|
for (i = 0; i < BCM2835_NUM_IRQS; i++) {
|
|
pc->irq[i] = irq_of_parse_and_map(np, i);
|
|
pc->irq_group[i] = i;
|
|
/*
|
|
* Use the same handler for all groups: this is necessary
|
|
* since we use one gpiochip to cover all lines - the
|
|
* irq handler then needs to figure out which group and
|
|
* bank that was firing the IRQ and look up the per-group
|
|
* and bank data.
|
|
*/
|
|
gpiochip_set_chained_irqchip(&pc->gpio_chip,
|
|
&bcm2835_gpio_irq_chip,
|
|
pc->irq[i],
|
|
bcm2835_gpio_irq_handler);
|
|
}
|
|
|
|
pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
|
|
if (IS_ERR(pc->pctl_dev)) {
|
|
gpiochip_remove(&pc->gpio_chip);
|
|
return PTR_ERR(pc->pctl_dev);
|
|
}
|
|
|
|
pc->gpio_range = bcm2835_pinctrl_gpio_range;
|
|
pc->gpio_range.base = pc->gpio_chip.base;
|
|
pc->gpio_range.gc = &pc->gpio_chip;
|
|
pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm2835_pinctrl_remove(struct platform_device *pdev)
|
|
{
|
|
struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev);
|
|
|
|
gpiochip_remove(&pc->gpio_chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bcm2835_pinctrl_match[] = {
|
|
{ .compatible = "brcm,bcm2835-gpio" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm2835_pinctrl_match);
|
|
|
|
static struct platform_driver bcm2835_pinctrl_driver = {
|
|
.probe = bcm2835_pinctrl_probe,
|
|
.remove = bcm2835_pinctrl_remove,
|
|
.driver = {
|
|
.name = MODULE_NAME,
|
|
.of_match_table = bcm2835_pinctrl_match,
|
|
},
|
|
};
|
|
module_platform_driver(bcm2835_pinctrl_driver);
|
|
|
|
MODULE_AUTHOR("Chris Boot, Simon Arlott, Stephen Warren");
|
|
MODULE_DESCRIPTION("BCM2835 Pin control driver");
|
|
MODULE_LICENSE("GPL");
|