mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 22:41:11 +07:00
3601fe43e8
Core changes:
- The big change this time around is the irqchip handling in
the qualcomm pin controllers, closely coupled with the
gpiochip. This rework, in a classic fall-between-the-chairs
fashion has been sidestepped for too long. The Qualcomm
IRQchips using the SPMI and SSBI transport mechanisms have
been rewritten to use hierarchical irqchip. This creates
the base from which I intend to gradually pull support for
hierarchical irqchips into the gpiolib irqchip helpers to
cut down on duplicate code. We have too many hacks in the
kernel because people have been working around the missing
hierarchical irqchip for years, and once it was there,
noone understood it for a while. We are now slowly adapting
to using it. This is why this pull requests include changes
to MFD, SPMI, IRQchip core and some ARM Device Trees
pertaining to the Qualcomm chip family. Since Qualcomm have
so many chips and such large deployments it is paramount
that this platform gets this right, and now it (hopefully)
does.
- Core support for pull-up and pull-down configuration, also
from the device tree. When a simple GPIO chip support a
"off or on" pull-up or pull-down resistor, we provide a
way to set this up using machine descriptors or device tree.
If more elaborate control of pull up/down (such as
resistance shunt setting) is required, drivers should be
phased over to use pin control. We do not yet provide a
userspace ABI for this pull up-down setting but I suspect
the makers are going to ask for it soon enough. PCA953x
is the first user of this new API.
- The GPIO mockup driver has been revamped after some
discussion improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for
both testing and virtual prototyping, e.g. when you do
not yet have a GPIO expander to play with but really
want to get something to develop code around before
hardware is available. It's neat. The blackbox testing
usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating
flags.
- A new device core helper for devm_platform_ioremap_resource()
is funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped
I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum
driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers.
-----BEGIN PGP SIGNATURE-----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=VoVC
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in the
qualcomm pin controllers, closely coupled with the gpiochip. This
rework, in a classic fall-between-the-chairs fashion has been
sidestepped for too long.
The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
have been rewritten to use hierarchical irqchip. This creates the
base from which I intend to gradually pull support for hierarchical
irqchips into the gpiolib irqchip helpers to cut down on duplicate
code.
We have too many hacks in the kernel because people have been
working around the missing hierarchical irqchip for years, and once
it was there, noone understood it for a while. We are now slowly
adapting to using it.
This is why this pull requests include changes to MFD, SPMI,
IRQchip core and some ARM Device Trees pertaining to the Qualcomm
chip family. Since Qualcomm have so many chips and such large
deployments it is paramount that this platform gets this right, and
now it (hopefully) does.
- Core support for pull-up and pull-down configuration, also from the
device tree. When a simple GPIO chip supports an "off or on" pull-up
or pull-down resistor, we provide a way to set this up using
machine descriptors or device tree.
If more elaborate control of pull up/down (such as resistance shunt
setting) is required, drivers should be phased over to use pin
control. We do not yet provide a userspace ABI for this pull
up-down setting but I suspect the makers are going to ask for it
soon enough. PCA953x is the first user of this new API.
- The GPIO mockup driver has been revamped after some discussion
improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for both testing
and virtual prototyping, e.g. when you do not yet have a GPIO
expander to play with but really want to get something to develop
code around before hardware is available. It's neat. The blackbox
testing usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating flags.
- A new device core helper for devm_platform_ioremap_resource() is
funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers"
* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
gpio: gpio-omap: fix level interrupt idling
gpio: amd-fch: Set proper output level for direction_output
x86: apuv2: remove unused variable
gpio: pca953x: Use PCA_LATCH_INT
platform/x86: fix PCENGINES_APU2 Kconfig warning
gpio: pca953x: Fix dereference of irq data in shutdown
gpio: amd-fch: Fix type error found by sparse
gpio: amd-fch: Drop const from resource
gpio: mxc: add check to return defer probe if clock tree NOT ready
gpio: ftgpio: Register per-instance irqchip
gpio: ixp4xx: Add DT bindings
x86: pcengines apuv2 gpio/leds/keys platform driver
gpio: AMD G-Series PCH gpio driver
drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
gpio: tqmx86: Set proper output level for direction_output
gpio: sprd: Change to use SoC compatible string
gpio: sprd: Use SoC compatible string instead of wildcard string
gpio: of: Handle both enable-gpio{,s}
gpio: of: Restrict enable-gpio quirk to regulator-gpio
gpio: davinci: use devm_platform_ioremap_resource()
...
580 lines
14 KiB
Plaintext
580 lines
14 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
model = "Qualcomm MSM8660";
|
|
compatible = "qcom,msm8660";
|
|
interrupt-parent = <&intc>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "qcom,scorpion";
|
|
enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "qcom,scorpion";
|
|
enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0>;
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,scorpion-mp-pmu";
|
|
interrupts = <1 9 0x304>;
|
|
};
|
|
|
|
clocks {
|
|
cxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
pxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
};
|
|
|
|
sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* These channels from the ADC are simply hardware monitors.
|
|
* That is why the ADC is referred to as "HKADC" - HouseKeeping
|
|
* ADC.
|
|
*/
|
|
iio-hwmon {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&xoadc 0x00 0x01>, /* Battery */
|
|
<&xoadc 0x00 0x02>, /* DC in (charger) */
|
|
<&xoadc 0x00 0x04>, /* VPH the main system voltage */
|
|
<&xoadc 0x00 0x0b>, /* Die temperature */
|
|
<&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
|
|
<&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
|
|
<&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
intc: interrupt-controller@2080000 {
|
|
compatible = "qcom,msm-8660-qgic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = < 0x02080000 0x1000 >,
|
|
< 0x02081000 0x1000 >;
|
|
};
|
|
|
|
timer@2000000 {
|
|
compatible = "qcom,scss-timer", "qcom,msm-timer";
|
|
interrupts = <1 0 0x301>,
|
|
<1 1 0x301>,
|
|
<1 2 0x301>;
|
|
reg = <0x02000000 0x100>;
|
|
clock-frequency = <27000000>,
|
|
<32768>;
|
|
cpu-offset = <0x40000>;
|
|
};
|
|
|
|
tlmm: pinctrl@800000 {
|
|
compatible = "qcom,msm8660-pinctrl";
|
|
reg = <0x800000 0x4000>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <0 16 0x4>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
};
|
|
|
|
gcc: clock-controller@900000 {
|
|
compatible = "qcom,gcc-msm8660";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
reg = <0x900000 0x4000>;
|
|
};
|
|
|
|
gsbi6: gsbi@16500000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x16500000 0x100>;
|
|
clocks = <&gcc GSBI6_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi6_serial: serial@16540000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16540000 0x1000>,
|
|
<0x16500000 0x1000>;
|
|
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi6_i2c: i2c@16580000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x16580000 0x1000>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gsbi7: gsbi@16600000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x16600000 0x100>;
|
|
clocks = <&gcc GSBI7_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi7_serial: serial@16640000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16640000 0x1000>,
|
|
<0x16600000 0x1000>;
|
|
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi7_i2c: i2c@16680000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x16680000 0x1000>;
|
|
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gsbi8: gsbi@19800000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x19800000 0x100>;
|
|
clocks = <&gcc GSBI8_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi8_i2c: i2c@19880000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x19880000 0x1000>;
|
|
interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gsbi12: gsbi@19c00000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x19c00000 0x100>;
|
|
clocks = <&gcc GSBI12_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi12_serial: serial@19c40000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x19c40000 0x1000>,
|
|
<0x19c00000 0x1000>;
|
|
interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi12_i2c: i2c@19c80000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x19c80000 0x1000>;
|
|
interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
external-bus@1a100000 {
|
|
compatible = "qcom,msm8660-ebi2";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x0 0x1a800000 0x00800000>,
|
|
<1 0x0 0x1b000000 0x00800000>,
|
|
<2 0x0 0x1b800000 0x00800000>,
|
|
<3 0x0 0x1d000000 0x08000000>,
|
|
<4 0x0 0x1c800000 0x00800000>,
|
|
<5 0x0 0x1c000000 0x00800000>;
|
|
reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
|
|
reg-names = "ebi2", "xmem";
|
|
clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
|
|
clock-names = "ebi2x", "ebi2";
|
|
status = "disabled";
|
|
};
|
|
|
|
qcom,ssbi@500000 {
|
|
compatible = "qcom,ssbi";
|
|
reg = <0x500000 0x1000>;
|
|
qcom,controller-type = "pmic-arbiter";
|
|
|
|
pm8058: pmic@0 {
|
|
compatible = "qcom,pm8058";
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <88 8>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8058_gpio: gpio@150 {
|
|
compatible = "qcom,pm8058-gpio",
|
|
"qcom,ssbi-gpio";
|
|
reg = <0x150>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
|
|
|
pm8058_mpps: mpps@50 {
|
|
compatible = "qcom,pm8058-mpp",
|
|
"qcom,ssbi-mpp";
|
|
reg = <0x50>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts =
|
|
<128 IRQ_TYPE_NONE>,
|
|
<129 IRQ_TYPE_NONE>,
|
|
<130 IRQ_TYPE_NONE>,
|
|
<131 IRQ_TYPE_NONE>,
|
|
<132 IRQ_TYPE_NONE>,
|
|
<133 IRQ_TYPE_NONE>,
|
|
<134 IRQ_TYPE_NONE>,
|
|
<135 IRQ_TYPE_NONE>,
|
|
<136 IRQ_TYPE_NONE>,
|
|
<137 IRQ_TYPE_NONE>,
|
|
<138 IRQ_TYPE_NONE>,
|
|
<139 IRQ_TYPE_NONE>;
|
|
};
|
|
|
|
pwrkey@1c {
|
|
compatible = "qcom,pm8058-pwrkey";
|
|
reg = <0x1c>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts = <50 1>, <51 1>;
|
|
debounce = <15625>;
|
|
pull-up;
|
|
};
|
|
|
|
keypad@148 {
|
|
compatible = "qcom,pm8058-keypad";
|
|
reg = <0x148>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts = <74 1>, <75 1>;
|
|
debounce = <15>;
|
|
scan-delay = <32>;
|
|
row-hold = <91500>;
|
|
};
|
|
|
|
xoadc: xoadc@197 {
|
|
compatible = "qcom,pm8058-adc";
|
|
reg = <0x197>;
|
|
interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
#io-channel-cells = <2>;
|
|
|
|
vcoin: adc-channel@0 {
|
|
reg = <0x00 0x00>;
|
|
};
|
|
vbat: adc-channel@1 {
|
|
reg = <0x00 0x01>;
|
|
};
|
|
dcin: adc-channel@2 {
|
|
reg = <0x00 0x02>;
|
|
};
|
|
ichg: adc-channel@3 {
|
|
reg = <0x00 0x03>;
|
|
};
|
|
vph_pwr: adc-channel@4 {
|
|
reg = <0x00 0x04>;
|
|
};
|
|
usb_vbus: adc-channel@a {
|
|
reg = <0x00 0x0a>;
|
|
};
|
|
die_temp: adc-channel@b {
|
|
reg = <0x00 0x0b>;
|
|
};
|
|
ref_625mv: adc-channel@c {
|
|
reg = <0x00 0x0c>;
|
|
};
|
|
ref_1250mv: adc-channel@d {
|
|
reg = <0x00 0x0d>;
|
|
};
|
|
ref_325mv: adc-channel@e {
|
|
reg = <0x00 0x0e>;
|
|
};
|
|
ref_muxoff: adc-channel@f {
|
|
reg = <0x00 0x0f>;
|
|
};
|
|
};
|
|
|
|
rtc@1e8 {
|
|
compatible = "qcom,pm8058-rtc";
|
|
reg = <0x1e8>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts = <39 1>;
|
|
allow-set-time;
|
|
};
|
|
|
|
vibrator@4a {
|
|
compatible = "qcom,pm8058-vib";
|
|
reg = <0x4a>;
|
|
};
|
|
};
|
|
};
|
|
|
|
l2cc: clock-controller@2082000 {
|
|
compatible = "syscon";
|
|
reg = <0x02082000 0x1000>;
|
|
};
|
|
|
|
rpm: rpm@104000 {
|
|
compatible = "qcom,rpm-msm8660";
|
|
reg = <0x00104000 0x1000>;
|
|
qcom,ipc = <&l2cc 0x8 2>;
|
|
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "ack", "err", "wakeup";
|
|
clocks = <&gcc RPM_MSG_RAM_H_CLK>;
|
|
clock-names = "ram";
|
|
|
|
rpmcc: clock-controller {
|
|
compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pm8901-regulators {
|
|
compatible = "qcom,rpm-pm8901-regulators";
|
|
|
|
pm8901_l0: l0 {};
|
|
pm8901_l1: l1 {};
|
|
pm8901_l2: l2 {};
|
|
pm8901_l3: l3 {};
|
|
pm8901_l4: l4 {};
|
|
pm8901_l5: l5 {};
|
|
pm8901_l6: l6 {};
|
|
|
|
/* S0 and S1 Handled as SAW regulators by SPM */
|
|
pm8901_s2: s2 {};
|
|
pm8901_s3: s3 {};
|
|
pm8901_s4: s4 {};
|
|
|
|
pm8901_lvs0: lvs0 {};
|
|
pm8901_lvs1: lvs1 {};
|
|
pm8901_lvs2: lvs2 {};
|
|
pm8901_lvs3: lvs3 {};
|
|
|
|
pm8901_mvs: mvs {};
|
|
};
|
|
|
|
pm8058-regulators {
|
|
compatible = "qcom,rpm-pm8058-regulators";
|
|
|
|
pm8058_l0: l0 {};
|
|
pm8058_l1: l1 {};
|
|
pm8058_l2: l2 {};
|
|
pm8058_l3: l3 {};
|
|
pm8058_l4: l4 {};
|
|
pm8058_l5: l5 {};
|
|
pm8058_l6: l6 {};
|
|
pm8058_l7: l7 {};
|
|
pm8058_l8: l8 {};
|
|
pm8058_l9: l9 {};
|
|
pm8058_l10: l10 {};
|
|
pm8058_l11: l11 {};
|
|
pm8058_l12: l12 {};
|
|
pm8058_l13: l13 {};
|
|
pm8058_l14: l14 {};
|
|
pm8058_l15: l15 {};
|
|
pm8058_l16: l16 {};
|
|
pm8058_l17: l17 {};
|
|
pm8058_l18: l18 {};
|
|
pm8058_l19: l19 {};
|
|
pm8058_l20: l20 {};
|
|
pm8058_l21: l21 {};
|
|
pm8058_l22: l22 {};
|
|
pm8058_l23: l23 {};
|
|
pm8058_l24: l24 {};
|
|
pm8058_l25: l25 {};
|
|
|
|
pm8058_s0: s0 {};
|
|
pm8058_s1: s1 {};
|
|
pm8058_s2: s2 {};
|
|
pm8058_s3: s3 {};
|
|
pm8058_s4: s4 {};
|
|
|
|
pm8058_lvs0: lvs0 {};
|
|
pm8058_lvs1: lvs1 {};
|
|
|
|
pm8058_ncp: ncp {};
|
|
};
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
sdcc1: sdcc@12400000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
reg = <0x12400000 0x8000>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <8>;
|
|
max-frequency = <48000000>;
|
|
non-removable;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
sdcc2: sdcc@12140000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
reg = <0x12140000 0x8000>;
|
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <8>;
|
|
max-frequency = <48000000>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
sdcc3: sdcc@12180000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12180000 0x8000>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
no-1-8-v;
|
|
};
|
|
|
|
sdcc4: sdcc@121c0000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x121c0000 0x8000>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
max-frequency = <48000000>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
sdcc5: sdcc@12200000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12200000 0x8000>;
|
|
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
};
|
|
};
|
|
|
|
tcsr: syscon@1a400000 {
|
|
compatible = "qcom,tcsr-msm8660", "syscon";
|
|
reg = <0x1a400000 0x100>;
|
|
};
|
|
};
|
|
|
|
};
|