mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 14:36:46 +07:00
2243 lines
64 KiB
C
2243 lines
64 KiB
C
/*
|
|
* wm8903.c -- WM8903 ALSA SoC Audio driver
|
|
*
|
|
* Copyright 2008-12 Wolfson Microelectronics
|
|
* Copyright 2011-2012 NVIDIA, Inc.
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* TODO:
|
|
* - TDM mode configuration.
|
|
* - Digital microphone support.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/irq.h>
|
|
#include <sound/core.h>
|
|
#include <sound/jack.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/tlv.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/wm8903.h>
|
|
#include <trace/events/asoc.h>
|
|
|
|
#include "wm8903.h"
|
|
|
|
/* Register defaults at reset */
|
|
static const struct reg_default wm8903_reg_defaults[] = {
|
|
{ 4, 0x0018 }, /* R4 - Bias Control 0 */
|
|
{ 5, 0x0000 }, /* R5 - VMID Control 0 */
|
|
{ 6, 0x0000 }, /* R6 - Mic Bias Control 0 */
|
|
{ 8, 0x0001 }, /* R8 - Analogue DAC 0 */
|
|
{ 10, 0x0001 }, /* R10 - Analogue ADC 0 */
|
|
{ 12, 0x0000 }, /* R12 - Power Management 0 */
|
|
{ 13, 0x0000 }, /* R13 - Power Management 1 */
|
|
{ 14, 0x0000 }, /* R14 - Power Management 2 */
|
|
{ 15, 0x0000 }, /* R15 - Power Management 3 */
|
|
{ 16, 0x0000 }, /* R16 - Power Management 4 */
|
|
{ 17, 0x0000 }, /* R17 - Power Management 5 */
|
|
{ 18, 0x0000 }, /* R18 - Power Management 6 */
|
|
{ 20, 0x0400 }, /* R20 - Clock Rates 0 */
|
|
{ 21, 0x0D07 }, /* R21 - Clock Rates 1 */
|
|
{ 22, 0x0000 }, /* R22 - Clock Rates 2 */
|
|
{ 24, 0x0050 }, /* R24 - Audio Interface 0 */
|
|
{ 25, 0x0242 }, /* R25 - Audio Interface 1 */
|
|
{ 26, 0x0008 }, /* R26 - Audio Interface 2 */
|
|
{ 27, 0x0022 }, /* R27 - Audio Interface 3 */
|
|
{ 30, 0x00C0 }, /* R30 - DAC Digital Volume Left */
|
|
{ 31, 0x00C0 }, /* R31 - DAC Digital Volume Right */
|
|
{ 32, 0x0000 }, /* R32 - DAC Digital 0 */
|
|
{ 33, 0x0000 }, /* R33 - DAC Digital 1 */
|
|
{ 36, 0x00C0 }, /* R36 - ADC Digital Volume Left */
|
|
{ 37, 0x00C0 }, /* R37 - ADC Digital Volume Right */
|
|
{ 38, 0x0000 }, /* R38 - ADC Digital 0 */
|
|
{ 39, 0x0073 }, /* R39 - Digital Microphone 0 */
|
|
{ 40, 0x09BF }, /* R40 - DRC 0 */
|
|
{ 41, 0x3241 }, /* R41 - DRC 1 */
|
|
{ 42, 0x0020 }, /* R42 - DRC 2 */
|
|
{ 43, 0x0000 }, /* R43 - DRC 3 */
|
|
{ 44, 0x0085 }, /* R44 - Analogue Left Input 0 */
|
|
{ 45, 0x0085 }, /* R45 - Analogue Right Input 0 */
|
|
{ 46, 0x0044 }, /* R46 - Analogue Left Input 1 */
|
|
{ 47, 0x0044 }, /* R47 - Analogue Right Input 1 */
|
|
{ 50, 0x0008 }, /* R50 - Analogue Left Mix 0 */
|
|
{ 51, 0x0004 }, /* R51 - Analogue Right Mix 0 */
|
|
{ 52, 0x0000 }, /* R52 - Analogue Spk Mix Left 0 */
|
|
{ 53, 0x0000 }, /* R53 - Analogue Spk Mix Left 1 */
|
|
{ 54, 0x0000 }, /* R54 - Analogue Spk Mix Right 0 */
|
|
{ 55, 0x0000 }, /* R55 - Analogue Spk Mix Right 1 */
|
|
{ 57, 0x002D }, /* R57 - Analogue OUT1 Left */
|
|
{ 58, 0x002D }, /* R58 - Analogue OUT1 Right */
|
|
{ 59, 0x0039 }, /* R59 - Analogue OUT2 Left */
|
|
{ 60, 0x0039 }, /* R60 - Analogue OUT2 Right */
|
|
{ 62, 0x0139 }, /* R62 - Analogue OUT3 Left */
|
|
{ 63, 0x0139 }, /* R63 - Analogue OUT3 Right */
|
|
{ 64, 0x0000 }, /* R65 - Analogue SPK Output Control 0 */
|
|
{ 67, 0x0010 }, /* R67 - DC Servo 0 */
|
|
{ 69, 0x00A4 }, /* R69 - DC Servo 2 */
|
|
{ 90, 0x0000 }, /* R90 - Analogue HP 0 */
|
|
{ 94, 0x0000 }, /* R94 - Analogue Lineout 0 */
|
|
{ 98, 0x0000 }, /* R98 - Charge Pump 0 */
|
|
{ 104, 0x0000 }, /* R104 - Class W 0 */
|
|
{ 108, 0x0000 }, /* R108 - Write Sequencer 0 */
|
|
{ 109, 0x0000 }, /* R109 - Write Sequencer 1 */
|
|
{ 110, 0x0000 }, /* R110 - Write Sequencer 2 */
|
|
{ 111, 0x0000 }, /* R111 - Write Sequencer 3 */
|
|
{ 112, 0x0000 }, /* R112 - Write Sequencer 4 */
|
|
{ 114, 0x0000 }, /* R114 - Control Interface */
|
|
{ 116, 0x00A8 }, /* R116 - GPIO Control 1 */
|
|
{ 117, 0x00A8 }, /* R117 - GPIO Control 2 */
|
|
{ 118, 0x00A8 }, /* R118 - GPIO Control 3 */
|
|
{ 119, 0x0220 }, /* R119 - GPIO Control 4 */
|
|
{ 120, 0x01A0 }, /* R120 - GPIO Control 5 */
|
|
{ 122, 0xFFFF }, /* R122 - Interrupt Status 1 Mask */
|
|
{ 123, 0x0000 }, /* R123 - Interrupt Polarity 1 */
|
|
{ 126, 0x0000 }, /* R126 - Interrupt Control */
|
|
{ 129, 0x0000 }, /* R129 - Control Interface Test 1 */
|
|
{ 149, 0x6810 }, /* R149 - Charge Pump Test 1 */
|
|
{ 164, 0x0028 }, /* R164 - Clock Rate Test 4 */
|
|
{ 172, 0x0000 }, /* R172 - Analogue Output Bias 0 */
|
|
};
|
|
|
|
struct wm8903_priv {
|
|
struct wm8903_platform_data *pdata;
|
|
struct device *dev;
|
|
struct snd_soc_codec *codec;
|
|
struct regmap *regmap;
|
|
|
|
int sysclk;
|
|
int irq;
|
|
|
|
int fs;
|
|
int deemph;
|
|
|
|
int dcs_pending;
|
|
int dcs_cache[4];
|
|
|
|
/* Reference count */
|
|
int class_w_users;
|
|
|
|
struct snd_soc_jack *mic_jack;
|
|
int mic_det;
|
|
int mic_short;
|
|
int mic_last_report;
|
|
int mic_delay;
|
|
|
|
#ifdef CONFIG_GPIOLIB
|
|
struct gpio_chip gpio_chip;
|
|
#endif
|
|
};
|
|
|
|
static bool wm8903_readable_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case WM8903_SW_RESET_AND_ID:
|
|
case WM8903_REVISION_NUMBER:
|
|
case WM8903_BIAS_CONTROL_0:
|
|
case WM8903_VMID_CONTROL_0:
|
|
case WM8903_MIC_BIAS_CONTROL_0:
|
|
case WM8903_ANALOGUE_DAC_0:
|
|
case WM8903_ANALOGUE_ADC_0:
|
|
case WM8903_POWER_MANAGEMENT_0:
|
|
case WM8903_POWER_MANAGEMENT_1:
|
|
case WM8903_POWER_MANAGEMENT_2:
|
|
case WM8903_POWER_MANAGEMENT_3:
|
|
case WM8903_POWER_MANAGEMENT_4:
|
|
case WM8903_POWER_MANAGEMENT_5:
|
|
case WM8903_POWER_MANAGEMENT_6:
|
|
case WM8903_CLOCK_RATES_0:
|
|
case WM8903_CLOCK_RATES_1:
|
|
case WM8903_CLOCK_RATES_2:
|
|
case WM8903_AUDIO_INTERFACE_0:
|
|
case WM8903_AUDIO_INTERFACE_1:
|
|
case WM8903_AUDIO_INTERFACE_2:
|
|
case WM8903_AUDIO_INTERFACE_3:
|
|
case WM8903_DAC_DIGITAL_VOLUME_LEFT:
|
|
case WM8903_DAC_DIGITAL_VOLUME_RIGHT:
|
|
case WM8903_DAC_DIGITAL_0:
|
|
case WM8903_DAC_DIGITAL_1:
|
|
case WM8903_ADC_DIGITAL_VOLUME_LEFT:
|
|
case WM8903_ADC_DIGITAL_VOLUME_RIGHT:
|
|
case WM8903_ADC_DIGITAL_0:
|
|
case WM8903_DIGITAL_MICROPHONE_0:
|
|
case WM8903_DRC_0:
|
|
case WM8903_DRC_1:
|
|
case WM8903_DRC_2:
|
|
case WM8903_DRC_3:
|
|
case WM8903_ANALOGUE_LEFT_INPUT_0:
|
|
case WM8903_ANALOGUE_RIGHT_INPUT_0:
|
|
case WM8903_ANALOGUE_LEFT_INPUT_1:
|
|
case WM8903_ANALOGUE_RIGHT_INPUT_1:
|
|
case WM8903_ANALOGUE_LEFT_MIX_0:
|
|
case WM8903_ANALOGUE_RIGHT_MIX_0:
|
|
case WM8903_ANALOGUE_SPK_MIX_LEFT_0:
|
|
case WM8903_ANALOGUE_SPK_MIX_LEFT_1:
|
|
case WM8903_ANALOGUE_SPK_MIX_RIGHT_0:
|
|
case WM8903_ANALOGUE_SPK_MIX_RIGHT_1:
|
|
case WM8903_ANALOGUE_OUT1_LEFT:
|
|
case WM8903_ANALOGUE_OUT1_RIGHT:
|
|
case WM8903_ANALOGUE_OUT2_LEFT:
|
|
case WM8903_ANALOGUE_OUT2_RIGHT:
|
|
case WM8903_ANALOGUE_OUT3_LEFT:
|
|
case WM8903_ANALOGUE_OUT3_RIGHT:
|
|
case WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0:
|
|
case WM8903_DC_SERVO_0:
|
|
case WM8903_DC_SERVO_2:
|
|
case WM8903_DC_SERVO_READBACK_1:
|
|
case WM8903_DC_SERVO_READBACK_2:
|
|
case WM8903_DC_SERVO_READBACK_3:
|
|
case WM8903_DC_SERVO_READBACK_4:
|
|
case WM8903_ANALOGUE_HP_0:
|
|
case WM8903_ANALOGUE_LINEOUT_0:
|
|
case WM8903_CHARGE_PUMP_0:
|
|
case WM8903_CLASS_W_0:
|
|
case WM8903_WRITE_SEQUENCER_0:
|
|
case WM8903_WRITE_SEQUENCER_1:
|
|
case WM8903_WRITE_SEQUENCER_2:
|
|
case WM8903_WRITE_SEQUENCER_3:
|
|
case WM8903_WRITE_SEQUENCER_4:
|
|
case WM8903_CONTROL_INTERFACE:
|
|
case WM8903_GPIO_CONTROL_1:
|
|
case WM8903_GPIO_CONTROL_2:
|
|
case WM8903_GPIO_CONTROL_3:
|
|
case WM8903_GPIO_CONTROL_4:
|
|
case WM8903_GPIO_CONTROL_5:
|
|
case WM8903_INTERRUPT_STATUS_1:
|
|
case WM8903_INTERRUPT_STATUS_1_MASK:
|
|
case WM8903_INTERRUPT_POLARITY_1:
|
|
case WM8903_INTERRUPT_CONTROL:
|
|
case WM8903_CLOCK_RATE_TEST_4:
|
|
case WM8903_ANALOGUE_OUTPUT_BIAS_0:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool wm8903_volatile_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case WM8903_SW_RESET_AND_ID:
|
|
case WM8903_REVISION_NUMBER:
|
|
case WM8903_INTERRUPT_STATUS_1:
|
|
case WM8903_WRITE_SEQUENCER_4:
|
|
case WM8903_DC_SERVO_READBACK_1:
|
|
case WM8903_DC_SERVO_READBACK_2:
|
|
case WM8903_DC_SERVO_READBACK_3:
|
|
case WM8903_DC_SERVO_READBACK_4:
|
|
return 1;
|
|
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
WARN_ON(event != SND_SOC_DAPM_POST_PMU);
|
|
mdelay(4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_dcs_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_codec *codec = w->codec;
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_POST_PMU:
|
|
wm8903->dcs_pending |= 1 << w->shift;
|
|
break;
|
|
case SND_SOC_DAPM_PRE_PMD:
|
|
snd_soc_update_bits(codec, WM8903_DC_SERVO_0,
|
|
1 << w->shift, 0);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define WM8903_DCS_MODE_WRITE_STOP 0
|
|
#define WM8903_DCS_MODE_START_STOP 2
|
|
|
|
static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
|
|
enum snd_soc_dapm_type event, int subseq)
|
|
{
|
|
struct snd_soc_codec *codec = container_of(dapm,
|
|
struct snd_soc_codec, dapm);
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
int dcs_mode = WM8903_DCS_MODE_WRITE_STOP;
|
|
int i, val;
|
|
|
|
/* Complete any pending DC servo starts */
|
|
if (wm8903->dcs_pending) {
|
|
dev_dbg(codec->dev, "Starting DC servo for %x\n",
|
|
wm8903->dcs_pending);
|
|
|
|
/* If we've no cached values then we need to do startup */
|
|
for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) {
|
|
if (!(wm8903->dcs_pending & (1 << i)))
|
|
continue;
|
|
|
|
if (wm8903->dcs_cache[i]) {
|
|
dev_dbg(codec->dev,
|
|
"Restore DC servo %d value %x\n",
|
|
3 - i, wm8903->dcs_cache[i]);
|
|
|
|
snd_soc_write(codec, WM8903_DC_SERVO_4 + i,
|
|
wm8903->dcs_cache[i] & 0xff);
|
|
} else {
|
|
dev_dbg(codec->dev,
|
|
"Calibrate DC servo %d\n", 3 - i);
|
|
dcs_mode = WM8903_DCS_MODE_START_STOP;
|
|
}
|
|
}
|
|
|
|
/* Don't trust the cache for analogue */
|
|
if (wm8903->class_w_users)
|
|
dcs_mode = WM8903_DCS_MODE_START_STOP;
|
|
|
|
snd_soc_update_bits(codec, WM8903_DC_SERVO_2,
|
|
WM8903_DCS_MODE_MASK, dcs_mode);
|
|
|
|
snd_soc_update_bits(codec, WM8903_DC_SERVO_0,
|
|
WM8903_DCS_ENA_MASK, wm8903->dcs_pending);
|
|
|
|
switch (dcs_mode) {
|
|
case WM8903_DCS_MODE_WRITE_STOP:
|
|
break;
|
|
|
|
case WM8903_DCS_MODE_START_STOP:
|
|
msleep(270);
|
|
|
|
/* Cache the measured offsets for digital */
|
|
if (wm8903->class_w_users)
|
|
break;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) {
|
|
if (!(wm8903->dcs_pending & (1 << i)))
|
|
continue;
|
|
|
|
val = snd_soc_read(codec,
|
|
WM8903_DC_SERVO_READBACK_1 + i);
|
|
dev_dbg(codec->dev, "DC servo %d: %x\n",
|
|
3 - i, val);
|
|
wm8903->dcs_cache[i] = val;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
pr_warn("DCS mode %d delay not set\n", dcs_mode);
|
|
break;
|
|
}
|
|
|
|
wm8903->dcs_pending = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* When used with DAC outputs only the WM8903 charge pump supports
|
|
* operation in class W mode, providing very low power consumption
|
|
* when used with digital sources. Enable and disable this mode
|
|
* automatically depending on the mixer configuration.
|
|
*
|
|
* All the relevant controls are simple switches.
|
|
*/
|
|
static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_codec *codec = snd_soc_dapm_kcontrol_codec(kcontrol);
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
u16 reg;
|
|
int ret;
|
|
|
|
reg = snd_soc_read(codec, WM8903_CLASS_W_0);
|
|
|
|
/* Turn it off if we're about to enable bypass */
|
|
if (ucontrol->value.integer.value[0]) {
|
|
if (wm8903->class_w_users == 0) {
|
|
dev_dbg(codec->dev, "Disabling Class W\n");
|
|
snd_soc_write(codec, WM8903_CLASS_W_0, reg &
|
|
~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
|
|
}
|
|
wm8903->class_w_users++;
|
|
}
|
|
|
|
/* Implement the change */
|
|
ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol);
|
|
|
|
/* If we've just disabled the last bypass path turn Class W on */
|
|
if (!ucontrol->value.integer.value[0]) {
|
|
if (wm8903->class_w_users == 1) {
|
|
dev_dbg(codec->dev, "Enabling Class W\n");
|
|
snd_soc_write(codec, WM8903_CLASS_W_0, reg |
|
|
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
|
|
}
|
|
wm8903->class_w_users--;
|
|
}
|
|
|
|
dev_dbg(codec->dev, "Bypass use count now %d\n",
|
|
wm8903->class_w_users);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \
|
|
SOC_SINGLE_EXT(xname, reg, shift, max, invert, \
|
|
snd_soc_dapm_get_volsw, wm8903_class_w_put)
|
|
|
|
|
|
static int wm8903_deemph[] = { 0, 32000, 44100, 48000 };
|
|
|
|
static int wm8903_set_deemph(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
int val, i, best;
|
|
|
|
/* If we're using deemphasis select the nearest available sample
|
|
* rate.
|
|
*/
|
|
if (wm8903->deemph) {
|
|
best = 1;
|
|
for (i = 2; i < ARRAY_SIZE(wm8903_deemph); i++) {
|
|
if (abs(wm8903_deemph[i] - wm8903->fs) <
|
|
abs(wm8903_deemph[best] - wm8903->fs))
|
|
best = i;
|
|
}
|
|
|
|
val = best << WM8903_DEEMPH_SHIFT;
|
|
} else {
|
|
best = 0;
|
|
val = 0;
|
|
}
|
|
|
|
dev_dbg(codec->dev, "Set deemphasis %d (%dHz)\n",
|
|
best, wm8903_deemph[best]);
|
|
|
|
return snd_soc_update_bits(codec, WM8903_DAC_DIGITAL_1,
|
|
WM8903_DEEMPH_MASK, val);
|
|
}
|
|
|
|
static int wm8903_get_deemph(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
ucontrol->value.enumerated.item[0] = wm8903->deemph;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_put_deemph(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
int deemph = ucontrol->value.enumerated.item[0];
|
|
int ret = 0;
|
|
|
|
if (deemph > 1)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&codec->mutex);
|
|
if (wm8903->deemph != deemph) {
|
|
wm8903->deemph = deemph;
|
|
|
|
wm8903_set_deemph(codec);
|
|
|
|
ret = 1;
|
|
}
|
|
mutex_unlock(&codec->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* ALSA can only do steps of .01dB */
|
|
static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
|
|
|
|
static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
|
|
|
|
static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0);
|
|
static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
|
|
|
|
static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0);
|
|
|
|
static const char *hpf_mode_text[] = {
|
|
"Hi-fi", "Voice 1", "Voice 2", "Voice 3"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(hpf_mode,
|
|
WM8903_ADC_DIGITAL_0, 5, hpf_mode_text);
|
|
|
|
static const char *osr_text[] = {
|
|
"Low power", "High performance"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adc_osr,
|
|
WM8903_ANALOGUE_ADC_0, 0, osr_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(dac_osr,
|
|
WM8903_DAC_DIGITAL_1, 0, osr_text);
|
|
|
|
static const char *drc_slope_text[] = {
|
|
"1", "1/2", "1/4", "1/8", "1/16", "0"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(drc_slope_r0,
|
|
WM8903_DRC_2, 3, drc_slope_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(drc_slope_r1,
|
|
WM8903_DRC_2, 0, drc_slope_text);
|
|
|
|
static const char *drc_attack_text[] = {
|
|
"instantaneous",
|
|
"363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms",
|
|
"46.4ms", "92.8ms", "185.6ms"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(drc_attack,
|
|
WM8903_DRC_1, 12, drc_attack_text);
|
|
|
|
static const char *drc_decay_text[] = {
|
|
"186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s",
|
|
"23.87s", "47.56s"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(drc_decay,
|
|
WM8903_DRC_1, 8, drc_decay_text);
|
|
|
|
static const char *drc_ff_delay_text[] = {
|
|
"5 samples", "9 samples"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(drc_ff_delay,
|
|
WM8903_DRC_0, 5, drc_ff_delay_text);
|
|
|
|
static const char *drc_qr_decay_text[] = {
|
|
"0.725ms", "1.45ms", "5.8ms"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(drc_qr_decay,
|
|
WM8903_DRC_1, 4, drc_qr_decay_text);
|
|
|
|
static const char *drc_smoothing_text[] = {
|
|
"Low", "Medium", "High"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(drc_smoothing,
|
|
WM8903_DRC_0, 11, drc_smoothing_text);
|
|
|
|
static const char *soft_mute_text[] = {
|
|
"Fast (fs/2)", "Slow (fs/32)"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(soft_mute,
|
|
WM8903_DAC_DIGITAL_1, 10, soft_mute_text);
|
|
|
|
static const char *mute_mode_text[] = {
|
|
"Hard", "Soft"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(mute_mode,
|
|
WM8903_DAC_DIGITAL_1, 9, mute_mode_text);
|
|
|
|
static const char *companding_text[] = {
|
|
"ulaw", "alaw"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(dac_companding,
|
|
WM8903_AUDIO_INTERFACE_0, 0, companding_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adc_companding,
|
|
WM8903_AUDIO_INTERFACE_0, 2, companding_text);
|
|
|
|
static const char *input_mode_text[] = {
|
|
"Single-Ended", "Differential Line", "Differential Mic"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(linput_mode_enum,
|
|
WM8903_ANALOGUE_LEFT_INPUT_1, 0, input_mode_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(rinput_mode_enum,
|
|
WM8903_ANALOGUE_RIGHT_INPUT_1, 0, input_mode_text);
|
|
|
|
static const char *linput_mux_text[] = {
|
|
"IN1L", "IN2L", "IN3L"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(linput_enum,
|
|
WM8903_ANALOGUE_LEFT_INPUT_1, 2, linput_mux_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(linput_inv_enum,
|
|
WM8903_ANALOGUE_LEFT_INPUT_1, 4, linput_mux_text);
|
|
|
|
static const char *rinput_mux_text[] = {
|
|
"IN1R", "IN2R", "IN3R"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(rinput_enum,
|
|
WM8903_ANALOGUE_RIGHT_INPUT_1, 2, rinput_mux_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(rinput_inv_enum,
|
|
WM8903_ANALOGUE_RIGHT_INPUT_1, 4, rinput_mux_text);
|
|
|
|
|
|
static const char *sidetone_text[] = {
|
|
"None", "Left", "Right"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(lsidetone_enum,
|
|
WM8903_DAC_DIGITAL_0, 2, sidetone_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(rsidetone_enum,
|
|
WM8903_DAC_DIGITAL_0, 0, sidetone_text);
|
|
|
|
static const char *adcinput_text[] = {
|
|
"ADC", "DMIC"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcinput_enum,
|
|
WM8903_CLOCK_RATE_TEST_4, 9, adcinput_text);
|
|
|
|
static const char *aif_text[] = {
|
|
"Left", "Right"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(lcapture_enum,
|
|
WM8903_AUDIO_INTERFACE_0, 7, aif_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(rcapture_enum,
|
|
WM8903_AUDIO_INTERFACE_0, 6, aif_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(lplay_enum,
|
|
WM8903_AUDIO_INTERFACE_0, 5, aif_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(rplay_enum,
|
|
WM8903_AUDIO_INTERFACE_0, 4, aif_text);
|
|
|
|
static const struct snd_kcontrol_new wm8903_snd_controls[] = {
|
|
|
|
/* Input PGAs - No TLV since the scale depends on PGA mode */
|
|
SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0,
|
|
7, 1, 1),
|
|
SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0,
|
|
0, 31, 0),
|
|
SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1,
|
|
6, 1, 0),
|
|
|
|
SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0,
|
|
7, 1, 1),
|
|
SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0,
|
|
0, 31, 0),
|
|
SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1,
|
|
6, 1, 0),
|
|
|
|
/* ADCs */
|
|
SOC_ENUM("ADC OSR", adc_osr),
|
|
SOC_SINGLE("HPF Switch", WM8903_ADC_DIGITAL_0, 4, 1, 0),
|
|
SOC_ENUM("HPF Mode", hpf_mode),
|
|
SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0),
|
|
SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0),
|
|
SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1),
|
|
SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8903_DRC_3, 5, 124, 1,
|
|
drc_tlv_thresh),
|
|
SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp),
|
|
SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min),
|
|
SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max),
|
|
SOC_ENUM("DRC Attack Rate", drc_attack),
|
|
SOC_ENUM("DRC Decay Rate", drc_decay),
|
|
SOC_ENUM("DRC FF Delay", drc_ff_delay),
|
|
SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0),
|
|
SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0),
|
|
SOC_SINGLE_TLV("DRC QR Threshold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max),
|
|
SOC_ENUM("DRC QR Decay Rate", drc_qr_decay),
|
|
SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0),
|
|
SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0),
|
|
SOC_ENUM("DRC Smoothing Threshold", drc_smoothing),
|
|
SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup),
|
|
|
|
SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
|
|
WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
|
|
SOC_ENUM("ADC Companding Mode", adc_companding),
|
|
SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
|
|
|
|
SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8,
|
|
12, 0, digital_sidetone_tlv),
|
|
|
|
/* DAC */
|
|
SOC_ENUM("DAC OSR", dac_osr),
|
|
SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT,
|
|
WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
|
|
SOC_ENUM("DAC Soft Mute Rate", soft_mute),
|
|
SOC_ENUM("DAC Mute Mode", mute_mode),
|
|
SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0),
|
|
SOC_ENUM("DAC Companding Mode", dac_companding),
|
|
SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0),
|
|
SOC_SINGLE_TLV("DAC Boost Volume", WM8903_AUDIO_INTERFACE_0, 9, 3, 0,
|
|
dac_boost_tlv),
|
|
SOC_SINGLE_BOOL_EXT("Playback Deemphasis Switch", 0,
|
|
wm8903_get_deemph, wm8903_put_deemph),
|
|
|
|
/* Headphones */
|
|
SOC_DOUBLE_R("Headphone Switch",
|
|
WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
|
|
8, 1, 1),
|
|
SOC_DOUBLE_R("Headphone ZC Switch",
|
|
WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
|
|
6, 1, 0),
|
|
SOC_DOUBLE_R_TLV("Headphone Volume",
|
|
WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
|
|
0, 63, 0, out_tlv),
|
|
|
|
/* Line out */
|
|
SOC_DOUBLE_R("Line Out Switch",
|
|
WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
|
|
8, 1, 1),
|
|
SOC_DOUBLE_R("Line Out ZC Switch",
|
|
WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
|
|
6, 1, 0),
|
|
SOC_DOUBLE_R_TLV("Line Out Volume",
|
|
WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
|
|
0, 63, 0, out_tlv),
|
|
|
|
/* Speaker */
|
|
SOC_DOUBLE_R("Speaker Switch",
|
|
WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1),
|
|
SOC_DOUBLE_R("Speaker ZC Switch",
|
|
WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0),
|
|
SOC_DOUBLE_R_TLV("Speaker Volume",
|
|
WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT,
|
|
0, 63, 0, out_tlv),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new linput_mode_mux =
|
|
SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum);
|
|
|
|
static const struct snd_kcontrol_new rinput_mode_mux =
|
|
SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum);
|
|
|
|
static const struct snd_kcontrol_new linput_mux =
|
|
SOC_DAPM_ENUM("Left Input Mux", linput_enum);
|
|
|
|
static const struct snd_kcontrol_new linput_inv_mux =
|
|
SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum);
|
|
|
|
static const struct snd_kcontrol_new rinput_mux =
|
|
SOC_DAPM_ENUM("Right Input Mux", rinput_enum);
|
|
|
|
static const struct snd_kcontrol_new rinput_inv_mux =
|
|
SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum);
|
|
|
|
static const struct snd_kcontrol_new lsidetone_mux =
|
|
SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum);
|
|
|
|
static const struct snd_kcontrol_new rsidetone_mux =
|
|
SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum);
|
|
|
|
static const struct snd_kcontrol_new adcinput_mux =
|
|
SOC_DAPM_ENUM("ADC Input", adcinput_enum);
|
|
|
|
static const struct snd_kcontrol_new lcapture_mux =
|
|
SOC_DAPM_ENUM("Left Capture Mux", lcapture_enum);
|
|
|
|
static const struct snd_kcontrol_new rcapture_mux =
|
|
SOC_DAPM_ENUM("Right Capture Mux", rcapture_enum);
|
|
|
|
static const struct snd_kcontrol_new lplay_mux =
|
|
SOC_DAPM_ENUM("Left Playback Mux", lplay_enum);
|
|
|
|
static const struct snd_kcontrol_new rplay_mux =
|
|
SOC_DAPM_ENUM("Right Playback Mux", rplay_enum);
|
|
|
|
static const struct snd_kcontrol_new left_output_mixer[] = {
|
|
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
|
|
SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
|
|
SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new right_output_mixer[] = {
|
|
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0),
|
|
SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
|
|
SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new left_speaker_mixer[] = {
|
|
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0),
|
|
SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0),
|
|
SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new right_speaker_mixer[] = {
|
|
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0),
|
|
SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
|
|
1, 1, 0),
|
|
SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = {
|
|
SND_SOC_DAPM_INPUT("IN1L"),
|
|
SND_SOC_DAPM_INPUT("IN1R"),
|
|
SND_SOC_DAPM_INPUT("IN2L"),
|
|
SND_SOC_DAPM_INPUT("IN2R"),
|
|
SND_SOC_DAPM_INPUT("IN3L"),
|
|
SND_SOC_DAPM_INPUT("IN3R"),
|
|
SND_SOC_DAPM_INPUT("DMICDAT"),
|
|
|
|
SND_SOC_DAPM_OUTPUT("HPOUTL"),
|
|
SND_SOC_DAPM_OUTPUT("HPOUTR"),
|
|
SND_SOC_DAPM_OUTPUT("LINEOUTL"),
|
|
SND_SOC_DAPM_OUTPUT("LINEOUTR"),
|
|
SND_SOC_DAPM_OUTPUT("LOP"),
|
|
SND_SOC_DAPM_OUTPUT("LON"),
|
|
SND_SOC_DAPM_OUTPUT("ROP"),
|
|
SND_SOC_DAPM_OUTPUT("RON"),
|
|
|
|
SND_SOC_DAPM_SUPPLY("MICBIAS", WM8903_MIC_BIAS_CONTROL_0, 0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux),
|
|
SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0,
|
|
&linput_inv_mux),
|
|
SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux),
|
|
|
|
SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux),
|
|
SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0,
|
|
&rinput_inv_mux),
|
|
SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux),
|
|
|
|
SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_MUX("Left ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux),
|
|
SND_SOC_DAPM_MUX("Right ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux),
|
|
|
|
SND_SOC_DAPM_ADC("ADCL", NULL, WM8903_POWER_MANAGEMENT_6, 1, 0),
|
|
SND_SOC_DAPM_ADC("ADCR", NULL, WM8903_POWER_MANAGEMENT_6, 0, 0),
|
|
|
|
SND_SOC_DAPM_MUX("Left Capture Mux", SND_SOC_NOPM, 0, 0, &lcapture_mux),
|
|
SND_SOC_DAPM_MUX("Right Capture Mux", SND_SOC_NOPM, 0, 0, &rcapture_mux),
|
|
|
|
SND_SOC_DAPM_AIF_OUT("AIFTXL", "Left HiFi Capture", 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_AIF_OUT("AIFTXR", "Right HiFi Capture", 0, SND_SOC_NOPM, 0, 0),
|
|
|
|
SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux),
|
|
SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux),
|
|
|
|
SND_SOC_DAPM_AIF_IN("AIFRXL", "Left Playback", 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_AIF_IN("AIFRXR", "Right Playback", 0, SND_SOC_NOPM, 0, 0),
|
|
|
|
SND_SOC_DAPM_MUX("Left Playback Mux", SND_SOC_NOPM, 0, 0, &lplay_mux),
|
|
SND_SOC_DAPM_MUX("Right Playback Mux", SND_SOC_NOPM, 0, 0, &rplay_mux),
|
|
|
|
SND_SOC_DAPM_DAC("DACL", NULL, WM8903_POWER_MANAGEMENT_6, 3, 0),
|
|
SND_SOC_DAPM_DAC("DACR", NULL, WM8903_POWER_MANAGEMENT_6, 2, 0),
|
|
|
|
SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0,
|
|
left_output_mixer, ARRAY_SIZE(left_output_mixer)),
|
|
SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0,
|
|
right_output_mixer, ARRAY_SIZE(right_output_mixer)),
|
|
|
|
SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0,
|
|
left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
|
|
SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
|
|
right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
|
|
|
|
SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2,
|
|
1, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2,
|
|
0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 1, 0,
|
|
NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 0, 0,
|
|
NULL, 0),
|
|
|
|
SND_SOC_DAPM_PGA_S("HPL_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 7, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("HPL_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 6, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("HPL_ENA", 1, WM8903_ANALOGUE_HP_0, 4, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("HPR_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 3, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("HPR_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 2, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("HPR_ENA", 1, WM8903_ANALOGUE_HP_0, 0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_PGA_S("LINEOUTL_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 7, 0,
|
|
NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 6, 0,
|
|
NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 5, 0,
|
|
NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("LINEOUTL_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 4, 0,
|
|
NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("LINEOUTR_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 3, 0,
|
|
NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0,
|
|
NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 1, 0,
|
|
NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("LINEOUTR_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 0, 0,
|
|
NULL, 0),
|
|
|
|
SND_SOC_DAPM_SUPPLY("DCS Master", WM8903_DC_SERVO_0, 4, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("HPL_DCS", 3, SND_SOC_NOPM, 3, 0, wm8903_dcs_event,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
SND_SOC_DAPM_PGA_S("HPR_DCS", 3, SND_SOC_NOPM, 2, 0, wm8903_dcs_event,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
SND_SOC_DAPM_PGA_S("LINEOUTL_DCS", 3, SND_SOC_NOPM, 1, 0, wm8903_dcs_event,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
SND_SOC_DAPM_PGA_S("LINEOUTR_DCS", 3, SND_SOC_NOPM, 0, 0, wm8903_dcs_event,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
|
|
SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
|
|
NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0,
|
|
NULL, 0),
|
|
|
|
SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0,
|
|
wm8903_cp_event, SND_SOC_DAPM_POST_PMU),
|
|
SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0),
|
|
SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8903_CLOCK_RATES_2, 2, 0, NULL, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm8903_intercon[] = {
|
|
|
|
{ "CLK_DSP", NULL, "CLK_SYS" },
|
|
{ "MICBIAS", NULL, "CLK_SYS" },
|
|
{ "HPL_DCS", NULL, "CLK_SYS" },
|
|
{ "HPR_DCS", NULL, "CLK_SYS" },
|
|
{ "LINEOUTL_DCS", NULL, "CLK_SYS" },
|
|
{ "LINEOUTR_DCS", NULL, "CLK_SYS" },
|
|
|
|
{ "Left Input Mux", "IN1L", "IN1L" },
|
|
{ "Left Input Mux", "IN2L", "IN2L" },
|
|
{ "Left Input Mux", "IN3L", "IN3L" },
|
|
|
|
{ "Left Input Inverting Mux", "IN1L", "IN1L" },
|
|
{ "Left Input Inverting Mux", "IN2L", "IN2L" },
|
|
{ "Left Input Inverting Mux", "IN3L", "IN3L" },
|
|
|
|
{ "Right Input Mux", "IN1R", "IN1R" },
|
|
{ "Right Input Mux", "IN2R", "IN2R" },
|
|
{ "Right Input Mux", "IN3R", "IN3R" },
|
|
|
|
{ "Right Input Inverting Mux", "IN1R", "IN1R" },
|
|
{ "Right Input Inverting Mux", "IN2R", "IN2R" },
|
|
{ "Right Input Inverting Mux", "IN3R", "IN3R" },
|
|
|
|
{ "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" },
|
|
{ "Left Input Mode Mux", "Differential Line",
|
|
"Left Input Mux" },
|
|
{ "Left Input Mode Mux", "Differential Line",
|
|
"Left Input Inverting Mux" },
|
|
{ "Left Input Mode Mux", "Differential Mic",
|
|
"Left Input Mux" },
|
|
{ "Left Input Mode Mux", "Differential Mic",
|
|
"Left Input Inverting Mux" },
|
|
|
|
{ "Right Input Mode Mux", "Single-Ended",
|
|
"Right Input Inverting Mux" },
|
|
{ "Right Input Mode Mux", "Differential Line",
|
|
"Right Input Mux" },
|
|
{ "Right Input Mode Mux", "Differential Line",
|
|
"Right Input Inverting Mux" },
|
|
{ "Right Input Mode Mux", "Differential Mic",
|
|
"Right Input Mux" },
|
|
{ "Right Input Mode Mux", "Differential Mic",
|
|
"Right Input Inverting Mux" },
|
|
|
|
{ "Left Input PGA", NULL, "Left Input Mode Mux" },
|
|
{ "Right Input PGA", NULL, "Right Input Mode Mux" },
|
|
|
|
{ "Left ADC Input", "ADC", "Left Input PGA" },
|
|
{ "Left ADC Input", "DMIC", "DMICDAT" },
|
|
{ "Right ADC Input", "ADC", "Right Input PGA" },
|
|
{ "Right ADC Input", "DMIC", "DMICDAT" },
|
|
|
|
{ "Left Capture Mux", "Left", "ADCL" },
|
|
{ "Left Capture Mux", "Right", "ADCR" },
|
|
|
|
{ "Right Capture Mux", "Left", "ADCL" },
|
|
{ "Right Capture Mux", "Right", "ADCR" },
|
|
|
|
{ "AIFTXL", NULL, "Left Capture Mux" },
|
|
{ "AIFTXR", NULL, "Right Capture Mux" },
|
|
|
|
{ "ADCL", NULL, "Left ADC Input" },
|
|
{ "ADCL", NULL, "CLK_DSP" },
|
|
{ "ADCR", NULL, "Right ADC Input" },
|
|
{ "ADCR", NULL, "CLK_DSP" },
|
|
|
|
{ "Left Playback Mux", "Left", "AIFRXL" },
|
|
{ "Left Playback Mux", "Right", "AIFRXR" },
|
|
|
|
{ "Right Playback Mux", "Left", "AIFRXL" },
|
|
{ "Right Playback Mux", "Right", "AIFRXR" },
|
|
|
|
{ "DACL Sidetone", "Left", "ADCL" },
|
|
{ "DACL Sidetone", "Right", "ADCR" },
|
|
{ "DACR Sidetone", "Left", "ADCL" },
|
|
{ "DACR Sidetone", "Right", "ADCR" },
|
|
|
|
{ "DACL", NULL, "Left Playback Mux" },
|
|
{ "DACL", NULL, "DACL Sidetone" },
|
|
{ "DACL", NULL, "CLK_DSP" },
|
|
|
|
{ "DACR", NULL, "Right Playback Mux" },
|
|
{ "DACR", NULL, "DACR Sidetone" },
|
|
{ "DACR", NULL, "CLK_DSP" },
|
|
|
|
{ "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" },
|
|
{ "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" },
|
|
{ "Left Output Mixer", "DACL Switch", "DACL" },
|
|
{ "Left Output Mixer", "DACR Switch", "DACR" },
|
|
|
|
{ "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" },
|
|
{ "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" },
|
|
{ "Right Output Mixer", "DACL Switch", "DACL" },
|
|
{ "Right Output Mixer", "DACR Switch", "DACR" },
|
|
|
|
{ "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
|
|
{ "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
|
|
{ "Left Speaker Mixer", "DACL Switch", "DACL" },
|
|
{ "Left Speaker Mixer", "DACR Switch", "DACR" },
|
|
|
|
{ "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
|
|
{ "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
|
|
{ "Right Speaker Mixer", "DACL Switch", "DACL" },
|
|
{ "Right Speaker Mixer", "DACR Switch", "DACR" },
|
|
|
|
{ "Left Line Output PGA", NULL, "Left Output Mixer" },
|
|
{ "Right Line Output PGA", NULL, "Right Output Mixer" },
|
|
|
|
{ "Left Headphone Output PGA", NULL, "Left Output Mixer" },
|
|
{ "Right Headphone Output PGA", NULL, "Right Output Mixer" },
|
|
|
|
{ "Left Speaker PGA", NULL, "Left Speaker Mixer" },
|
|
{ "Right Speaker PGA", NULL, "Right Speaker Mixer" },
|
|
|
|
{ "HPL_ENA", NULL, "Left Headphone Output PGA" },
|
|
{ "HPR_ENA", NULL, "Right Headphone Output PGA" },
|
|
{ "HPL_ENA_DLY", NULL, "HPL_ENA" },
|
|
{ "HPR_ENA_DLY", NULL, "HPR_ENA" },
|
|
{ "LINEOUTL_ENA", NULL, "Left Line Output PGA" },
|
|
{ "LINEOUTR_ENA", NULL, "Right Line Output PGA" },
|
|
{ "LINEOUTL_ENA_DLY", NULL, "LINEOUTL_ENA" },
|
|
{ "LINEOUTR_ENA_DLY", NULL, "LINEOUTR_ENA" },
|
|
|
|
{ "HPL_DCS", NULL, "DCS Master" },
|
|
{ "HPR_DCS", NULL, "DCS Master" },
|
|
{ "LINEOUTL_DCS", NULL, "DCS Master" },
|
|
{ "LINEOUTR_DCS", NULL, "DCS Master" },
|
|
|
|
{ "HPL_DCS", NULL, "HPL_ENA_DLY" },
|
|
{ "HPR_DCS", NULL, "HPR_ENA_DLY" },
|
|
{ "LINEOUTL_DCS", NULL, "LINEOUTL_ENA_DLY" },
|
|
{ "LINEOUTR_DCS", NULL, "LINEOUTR_ENA_DLY" },
|
|
|
|
{ "HPL_ENA_OUTP", NULL, "HPL_DCS" },
|
|
{ "HPR_ENA_OUTP", NULL, "HPR_DCS" },
|
|
{ "LINEOUTL_ENA_OUTP", NULL, "LINEOUTL_DCS" },
|
|
{ "LINEOUTR_ENA_OUTP", NULL, "LINEOUTR_DCS" },
|
|
|
|
{ "HPL_RMV_SHORT", NULL, "HPL_ENA_OUTP" },
|
|
{ "HPR_RMV_SHORT", NULL, "HPR_ENA_OUTP" },
|
|
{ "LINEOUTL_RMV_SHORT", NULL, "LINEOUTL_ENA_OUTP" },
|
|
{ "LINEOUTR_RMV_SHORT", NULL, "LINEOUTR_ENA_OUTP" },
|
|
|
|
{ "HPOUTL", NULL, "HPL_RMV_SHORT" },
|
|
{ "HPOUTR", NULL, "HPR_RMV_SHORT" },
|
|
{ "LINEOUTL", NULL, "LINEOUTL_RMV_SHORT" },
|
|
{ "LINEOUTR", NULL, "LINEOUTR_RMV_SHORT" },
|
|
|
|
{ "LOP", NULL, "Left Speaker PGA" },
|
|
{ "LON", NULL, "Left Speaker PGA" },
|
|
|
|
{ "ROP", NULL, "Right Speaker PGA" },
|
|
{ "RON", NULL, "Right Speaker PGA" },
|
|
|
|
{ "Charge Pump", NULL, "CLK_DSP" },
|
|
|
|
{ "Left Headphone Output PGA", NULL, "Charge Pump" },
|
|
{ "Right Headphone Output PGA", NULL, "Charge Pump" },
|
|
{ "Left Line Output PGA", NULL, "Charge Pump" },
|
|
{ "Right Line Output PGA", NULL, "Charge Pump" },
|
|
};
|
|
|
|
static int wm8903_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_PREPARE:
|
|
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
|
|
WM8903_VMID_RES_MASK,
|
|
WM8903_VMID_RES_50K);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
|
|
snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
|
|
WM8903_POBCTRL | WM8903_ISEL_MASK |
|
|
WM8903_STARTUP_BIAS_ENA |
|
|
WM8903_BIAS_ENA,
|
|
WM8903_POBCTRL |
|
|
(2 << WM8903_ISEL_SHIFT) |
|
|
WM8903_STARTUP_BIAS_ENA);
|
|
|
|
snd_soc_update_bits(codec,
|
|
WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0,
|
|
WM8903_SPK_DISCHARGE,
|
|
WM8903_SPK_DISCHARGE);
|
|
|
|
msleep(33);
|
|
|
|
snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5,
|
|
WM8903_SPKL_ENA | WM8903_SPKR_ENA,
|
|
WM8903_SPKL_ENA | WM8903_SPKR_ENA);
|
|
|
|
snd_soc_update_bits(codec,
|
|
WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0,
|
|
WM8903_SPK_DISCHARGE, 0);
|
|
|
|
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
|
|
WM8903_VMID_TIE_ENA |
|
|
WM8903_BUFIO_ENA |
|
|
WM8903_VMID_IO_ENA |
|
|
WM8903_VMID_SOFT_MASK |
|
|
WM8903_VMID_RES_MASK |
|
|
WM8903_VMID_BUF_ENA,
|
|
WM8903_VMID_TIE_ENA |
|
|
WM8903_BUFIO_ENA |
|
|
WM8903_VMID_IO_ENA |
|
|
(2 << WM8903_VMID_SOFT_SHIFT) |
|
|
WM8903_VMID_RES_250K |
|
|
WM8903_VMID_BUF_ENA);
|
|
|
|
msleep(129);
|
|
|
|
snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5,
|
|
WM8903_SPKL_ENA | WM8903_SPKR_ENA,
|
|
0);
|
|
|
|
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
|
|
WM8903_VMID_SOFT_MASK, 0);
|
|
|
|
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
|
|
WM8903_VMID_RES_MASK,
|
|
WM8903_VMID_RES_50K);
|
|
|
|
snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
|
|
WM8903_BIAS_ENA | WM8903_POBCTRL,
|
|
WM8903_BIAS_ENA);
|
|
|
|
/* By default no bypass paths are enabled so
|
|
* enable Class W support.
|
|
*/
|
|
dev_dbg(codec->dev, "Enabling Class W\n");
|
|
snd_soc_update_bits(codec, WM8903_CLASS_W_0,
|
|
WM8903_CP_DYN_FREQ |
|
|
WM8903_CP_DYN_V,
|
|
WM8903_CP_DYN_FREQ |
|
|
WM8903_CP_DYN_V);
|
|
}
|
|
|
|
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
|
|
WM8903_VMID_RES_MASK,
|
|
WM8903_VMID_RES_250K);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
|
|
WM8903_BIAS_ENA, 0);
|
|
|
|
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
|
|
WM8903_VMID_SOFT_MASK,
|
|
2 << WM8903_VMID_SOFT_SHIFT);
|
|
|
|
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
|
|
WM8903_VMID_BUF_ENA, 0);
|
|
|
|
msleep(290);
|
|
|
|
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
|
|
WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA |
|
|
WM8903_VMID_IO_ENA | WM8903_VMID_RES_MASK |
|
|
WM8903_VMID_SOFT_MASK |
|
|
WM8903_VMID_BUF_ENA, 0);
|
|
|
|
snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
|
|
WM8903_STARTUP_BIAS_ENA, 0);
|
|
break;
|
|
}
|
|
|
|
codec->dapm.bias_level = level;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
wm8903->sysclk = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
|
|
|
|
aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
|
|
WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
aif1 |= WM8903_LRCLK_DIR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
aif1 |= WM8903_BCLK_DIR;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
aif1 |= 0x3;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
aif1 |= 0x3 | WM8903_AIF_LRCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_I2S:
|
|
aif1 |= 0x2;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
aif1 |= 0x1;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Clock inversion */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
/* frame inversion not valid for DSP modes */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif1 |= WM8903_AIF_BCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case SND_SOC_DAIFMT_I2S:
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif1 |= WM8903_AIF_BCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
aif1 |= WM8903_AIF_LRCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
u16 reg;
|
|
|
|
reg = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
|
|
|
|
if (mute)
|
|
reg |= WM8903_DAC_MUTE;
|
|
else
|
|
reg &= ~WM8903_DAC_MUTE;
|
|
|
|
snd_soc_write(codec, WM8903_DAC_DIGITAL_1, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Lookup table for CLK_SYS/fs ratio. 256fs or more is recommended
|
|
* for optimal performance so we list the lower rates first and match
|
|
* on the last match we find. */
|
|
static struct {
|
|
int div;
|
|
int rate;
|
|
int mode;
|
|
int mclk_div;
|
|
} clk_sys_ratios[] = {
|
|
{ 64, 0x0, 0x0, 1 },
|
|
{ 68, 0x0, 0x1, 1 },
|
|
{ 125, 0x0, 0x2, 1 },
|
|
{ 128, 0x1, 0x0, 1 },
|
|
{ 136, 0x1, 0x1, 1 },
|
|
{ 192, 0x2, 0x0, 1 },
|
|
{ 204, 0x2, 0x1, 1 },
|
|
|
|
{ 64, 0x0, 0x0, 2 },
|
|
{ 68, 0x0, 0x1, 2 },
|
|
{ 125, 0x0, 0x2, 2 },
|
|
{ 128, 0x1, 0x0, 2 },
|
|
{ 136, 0x1, 0x1, 2 },
|
|
{ 192, 0x2, 0x0, 2 },
|
|
{ 204, 0x2, 0x1, 2 },
|
|
|
|
{ 250, 0x2, 0x2, 1 },
|
|
{ 256, 0x3, 0x0, 1 },
|
|
{ 272, 0x3, 0x1, 1 },
|
|
{ 384, 0x4, 0x0, 1 },
|
|
{ 408, 0x4, 0x1, 1 },
|
|
{ 375, 0x4, 0x2, 1 },
|
|
{ 512, 0x5, 0x0, 1 },
|
|
{ 544, 0x5, 0x1, 1 },
|
|
{ 500, 0x5, 0x2, 1 },
|
|
{ 768, 0x6, 0x0, 1 },
|
|
{ 816, 0x6, 0x1, 1 },
|
|
{ 750, 0x6, 0x2, 1 },
|
|
{ 1024, 0x7, 0x0, 1 },
|
|
{ 1088, 0x7, 0x1, 1 },
|
|
{ 1000, 0x7, 0x2, 1 },
|
|
{ 1408, 0x8, 0x0, 1 },
|
|
{ 1496, 0x8, 0x1, 1 },
|
|
{ 1536, 0x9, 0x0, 1 },
|
|
{ 1632, 0x9, 0x1, 1 },
|
|
{ 1500, 0x9, 0x2, 1 },
|
|
|
|
{ 250, 0x2, 0x2, 2 },
|
|
{ 256, 0x3, 0x0, 2 },
|
|
{ 272, 0x3, 0x1, 2 },
|
|
{ 384, 0x4, 0x0, 2 },
|
|
{ 408, 0x4, 0x1, 2 },
|
|
{ 375, 0x4, 0x2, 2 },
|
|
{ 512, 0x5, 0x0, 2 },
|
|
{ 544, 0x5, 0x1, 2 },
|
|
{ 500, 0x5, 0x2, 2 },
|
|
{ 768, 0x6, 0x0, 2 },
|
|
{ 816, 0x6, 0x1, 2 },
|
|
{ 750, 0x6, 0x2, 2 },
|
|
{ 1024, 0x7, 0x0, 2 },
|
|
{ 1088, 0x7, 0x1, 2 },
|
|
{ 1000, 0x7, 0x2, 2 },
|
|
{ 1408, 0x8, 0x0, 2 },
|
|
{ 1496, 0x8, 0x1, 2 },
|
|
{ 1536, 0x9, 0x0, 2 },
|
|
{ 1632, 0x9, 0x1, 2 },
|
|
{ 1500, 0x9, 0x2, 2 },
|
|
};
|
|
|
|
/* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */
|
|
static struct {
|
|
int ratio;
|
|
int div;
|
|
} bclk_divs[] = {
|
|
{ 10, 0 },
|
|
{ 20, 2 },
|
|
{ 30, 3 },
|
|
{ 40, 4 },
|
|
{ 50, 5 },
|
|
{ 60, 7 },
|
|
{ 80, 8 },
|
|
{ 100, 9 },
|
|
{ 120, 11 },
|
|
{ 160, 12 },
|
|
{ 200, 13 },
|
|
{ 220, 14 },
|
|
{ 240, 15 },
|
|
{ 300, 17 },
|
|
{ 320, 18 },
|
|
{ 440, 19 },
|
|
{ 480, 20 },
|
|
};
|
|
|
|
/* Sample rates for DSP */
|
|
static struct {
|
|
int rate;
|
|
int value;
|
|
} sample_rates[] = {
|
|
{ 8000, 0 },
|
|
{ 11025, 1 },
|
|
{ 12000, 2 },
|
|
{ 16000, 3 },
|
|
{ 22050, 4 },
|
|
{ 24000, 5 },
|
|
{ 32000, 6 },
|
|
{ 44100, 7 },
|
|
{ 48000, 8 },
|
|
{ 88200, 9 },
|
|
{ 96000, 10 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
static int wm8903_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
int fs = params_rate(params);
|
|
int bclk;
|
|
int bclk_div;
|
|
int i;
|
|
int dsp_config;
|
|
int clk_config;
|
|
int best_val;
|
|
int cur_val;
|
|
int clk_sys;
|
|
|
|
u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
|
|
u16 aif2 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_2);
|
|
u16 aif3 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_3);
|
|
u16 clock0 = snd_soc_read(codec, WM8903_CLOCK_RATES_0);
|
|
u16 clock1 = snd_soc_read(codec, WM8903_CLOCK_RATES_1);
|
|
u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
|
|
|
|
/* Enable sloping stopband filter for low sample rates */
|
|
if (fs <= 24000)
|
|
dac_digital1 |= WM8903_DAC_SB_FILT;
|
|
else
|
|
dac_digital1 &= ~WM8903_DAC_SB_FILT;
|
|
|
|
/* Configure sample rate logic for DSP - choose nearest rate */
|
|
dsp_config = 0;
|
|
best_val = abs(sample_rates[dsp_config].rate - fs);
|
|
for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
|
|
cur_val = abs(sample_rates[i].rate - fs);
|
|
if (cur_val <= best_val) {
|
|
dsp_config = i;
|
|
best_val = cur_val;
|
|
}
|
|
}
|
|
|
|
dev_dbg(codec->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
|
|
clock1 &= ~WM8903_SAMPLE_RATE_MASK;
|
|
clock1 |= sample_rates[dsp_config].value;
|
|
|
|
aif1 &= ~WM8903_AIF_WL_MASK;
|
|
bclk = 2 * fs;
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
bclk *= 16;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
bclk *= 20;
|
|
aif1 |= 0x4;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
bclk *= 24;
|
|
aif1 |= 0x8;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
bclk *= 32;
|
|
aif1 |= 0xc;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(codec->dev, "MCLK = %dHz, target sample rate = %dHz\n",
|
|
wm8903->sysclk, fs);
|
|
|
|
/* We may not have an MCLK which allows us to generate exactly
|
|
* the clock we want, particularly with USB derived inputs, so
|
|
* approximate.
|
|
*/
|
|
clk_config = 0;
|
|
best_val = abs((wm8903->sysclk /
|
|
(clk_sys_ratios[0].mclk_div *
|
|
clk_sys_ratios[0].div)) - fs);
|
|
for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) {
|
|
cur_val = abs((wm8903->sysclk /
|
|
(clk_sys_ratios[i].mclk_div *
|
|
clk_sys_ratios[i].div)) - fs);
|
|
|
|
if (cur_val <= best_val) {
|
|
clk_config = i;
|
|
best_val = cur_val;
|
|
}
|
|
}
|
|
|
|
if (clk_sys_ratios[clk_config].mclk_div == 2) {
|
|
clock0 |= WM8903_MCLKDIV2;
|
|
clk_sys = wm8903->sysclk / 2;
|
|
} else {
|
|
clock0 &= ~WM8903_MCLKDIV2;
|
|
clk_sys = wm8903->sysclk;
|
|
}
|
|
|
|
clock1 &= ~(WM8903_CLK_SYS_RATE_MASK |
|
|
WM8903_CLK_SYS_MODE_MASK);
|
|
clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT;
|
|
clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT;
|
|
|
|
dev_dbg(codec->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
|
|
clk_sys_ratios[clk_config].rate,
|
|
clk_sys_ratios[clk_config].mode,
|
|
clk_sys_ratios[clk_config].div);
|
|
|
|
dev_dbg(codec->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
|
|
|
|
/* We may not get quite the right frequency if using
|
|
* approximate clocks so look for the closest match that is
|
|
* higher than the target (we need to ensure that there enough
|
|
* BCLKs to clock out the samples).
|
|
*/
|
|
bclk_div = 0;
|
|
best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk;
|
|
i = 1;
|
|
while (i < ARRAY_SIZE(bclk_divs)) {
|
|
cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk;
|
|
if (cur_val < 0) /* BCLK table is sorted */
|
|
break;
|
|
bclk_div = i;
|
|
best_val = cur_val;
|
|
i++;
|
|
}
|
|
|
|
aif2 &= ~WM8903_BCLK_DIV_MASK;
|
|
aif3 &= ~WM8903_LRCLK_RATE_MASK;
|
|
|
|
dev_dbg(codec->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
|
|
bclk_divs[bclk_div].ratio / 10, bclk,
|
|
(clk_sys * 10) / bclk_divs[bclk_div].ratio);
|
|
|
|
aif2 |= bclk_divs[bclk_div].div;
|
|
aif3 |= bclk / fs;
|
|
|
|
wm8903->fs = params_rate(params);
|
|
wm8903_set_deemph(codec);
|
|
|
|
snd_soc_write(codec, WM8903_CLOCK_RATES_0, clock0);
|
|
snd_soc_write(codec, WM8903_CLOCK_RATES_1, clock1);
|
|
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
|
|
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_2, aif2);
|
|
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_3, aif3);
|
|
snd_soc_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ
|
|
*
|
|
* @codec: WM8903 codec
|
|
* @jack: jack to report detection events on
|
|
* @det: value to report for presence detection
|
|
* @shrt: value to report for short detection
|
|
*
|
|
* Enable microphone detection via IRQ on the WM8903. If GPIOs are
|
|
* being used to bring out signals to the processor then only platform
|
|
* data configuration is needed for WM8903 and processor GPIOs should
|
|
* be configured using snd_soc_jack_add_gpios() instead.
|
|
*
|
|
* The current threasholds for detection should be configured using
|
|
* micdet_cfg in the platform data. Using this function will force on
|
|
* the microphone bias for the device.
|
|
*/
|
|
int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
|
|
int det, int shrt)
|
|
{
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
int irq_mask = WM8903_MICDET_EINT | WM8903_MICSHRT_EINT;
|
|
|
|
dev_dbg(codec->dev, "Enabling microphone detection: %x %x\n",
|
|
det, shrt);
|
|
|
|
/* Store the configuration */
|
|
wm8903->mic_jack = jack;
|
|
wm8903->mic_det = det;
|
|
wm8903->mic_short = shrt;
|
|
|
|
/* Enable interrupts we've got a report configured for */
|
|
if (det)
|
|
irq_mask &= ~WM8903_MICDET_EINT;
|
|
if (shrt)
|
|
irq_mask &= ~WM8903_MICSHRT_EINT;
|
|
|
|
snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK,
|
|
WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
|
|
irq_mask);
|
|
|
|
if (det || shrt) {
|
|
/* Enable mic detection, this may not have been set through
|
|
* platform data (eg, if the defaults are OK). */
|
|
snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
|
|
WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
|
|
snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
|
|
WM8903_MICDET_ENA, WM8903_MICDET_ENA);
|
|
} else {
|
|
snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
|
|
WM8903_MICDET_ENA, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8903_mic_detect);
|
|
|
|
static irqreturn_t wm8903_irq(int irq, void *data)
|
|
{
|
|
struct wm8903_priv *wm8903 = data;
|
|
int mic_report, ret;
|
|
unsigned int int_val, mask, int_pol;
|
|
|
|
ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_STATUS_1_MASK,
|
|
&mask);
|
|
if (ret != 0) {
|
|
dev_err(wm8903->dev, "Failed to read IRQ mask: %d\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_STATUS_1, &int_val);
|
|
if (ret != 0) {
|
|
dev_err(wm8903->dev, "Failed to read IRQ status: %d\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
int_val &= ~mask;
|
|
|
|
if (int_val & WM8903_WSEQ_BUSY_EINT) {
|
|
dev_warn(wm8903->dev, "Write sequencer done\n");
|
|
}
|
|
|
|
/*
|
|
* The rest is microphone jack detection. We need to manually
|
|
* invert the polarity of the interrupt after each event - to
|
|
* simplify the code keep track of the last state we reported
|
|
* and just invert the relevant bits in both the report and
|
|
* the polarity register.
|
|
*/
|
|
mic_report = wm8903->mic_last_report;
|
|
ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_POLARITY_1,
|
|
&int_pol);
|
|
if (ret != 0) {
|
|
dev_err(wm8903->dev, "Failed to read interrupt polarity: %d\n",
|
|
ret);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifndef CONFIG_SND_SOC_WM8903_MODULE
|
|
if (int_val & (WM8903_MICSHRT_EINT | WM8903_MICDET_EINT))
|
|
trace_snd_soc_jack_irq(dev_name(wm8903->dev));
|
|
#endif
|
|
|
|
if (int_val & WM8903_MICSHRT_EINT) {
|
|
dev_dbg(wm8903->dev, "Microphone short (pol=%x)\n", int_pol);
|
|
|
|
mic_report ^= wm8903->mic_short;
|
|
int_pol ^= WM8903_MICSHRT_INV;
|
|
}
|
|
|
|
if (int_val & WM8903_MICDET_EINT) {
|
|
dev_dbg(wm8903->dev, "Microphone detect (pol=%x)\n", int_pol);
|
|
|
|
mic_report ^= wm8903->mic_det;
|
|
int_pol ^= WM8903_MICDET_INV;
|
|
|
|
msleep(wm8903->mic_delay);
|
|
}
|
|
|
|
regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_POLARITY_1,
|
|
WM8903_MICSHRT_INV | WM8903_MICDET_INV, int_pol);
|
|
|
|
snd_soc_jack_report(wm8903->mic_jack, mic_report,
|
|
wm8903->mic_short | wm8903->mic_det);
|
|
|
|
wm8903->mic_last_report = mic_report;
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\
|
|
SNDRV_PCM_RATE_11025 | \
|
|
SNDRV_PCM_RATE_16000 | \
|
|
SNDRV_PCM_RATE_22050 | \
|
|
SNDRV_PCM_RATE_32000 | \
|
|
SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000 | \
|
|
SNDRV_PCM_RATE_88200 | \
|
|
SNDRV_PCM_RATE_96000)
|
|
|
|
#define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\
|
|
SNDRV_PCM_RATE_11025 | \
|
|
SNDRV_PCM_RATE_16000 | \
|
|
SNDRV_PCM_RATE_22050 | \
|
|
SNDRV_PCM_RATE_32000 | \
|
|
SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000)
|
|
|
|
#define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
|
|
SNDRV_PCM_FMTBIT_S20_3LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE)
|
|
|
|
static const struct snd_soc_dai_ops wm8903_dai_ops = {
|
|
.hw_params = wm8903_hw_params,
|
|
.digital_mute = wm8903_digital_mute,
|
|
.set_fmt = wm8903_set_dai_fmt,
|
|
.set_sysclk = wm8903_set_dai_sysclk,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver wm8903_dai = {
|
|
.name = "wm8903-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = WM8903_PLAYBACK_RATES,
|
|
.formats = WM8903_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = WM8903_CAPTURE_RATES,
|
|
.formats = WM8903_FORMATS,
|
|
},
|
|
.ops = &wm8903_dai_ops,
|
|
.symmetric_rates = 1,
|
|
};
|
|
|
|
static int wm8903_suspend(struct snd_soc_codec *codec)
|
|
{
|
|
wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_resume(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
regcache_sync(wm8903->regmap);
|
|
|
|
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_GPIOLIB
|
|
static inline struct wm8903_priv *gpio_to_wm8903(struct gpio_chip *chip)
|
|
{
|
|
return container_of(chip, struct wm8903_priv, gpio_chip);
|
|
}
|
|
|
|
static int wm8903_gpio_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
if (offset >= WM8903_NUM_GPIO)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
|
|
unsigned int mask, val;
|
|
int ret;
|
|
|
|
mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK;
|
|
val = (WM8903_GPn_FN_GPIO_INPUT << WM8903_GP1_FN_SHIFT) |
|
|
WM8903_GP1_DIR;
|
|
|
|
ret = regmap_update_bits(wm8903->regmap,
|
|
WM8903_GPIO_CONTROL_1 + offset, mask, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
|
|
unsigned int reg;
|
|
|
|
regmap_read(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset, ®);
|
|
|
|
return (reg & WM8903_GP1_LVL_MASK) >> WM8903_GP1_LVL_SHIFT;
|
|
}
|
|
|
|
static int wm8903_gpio_direction_out(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
|
|
unsigned int mask, val;
|
|
int ret;
|
|
|
|
mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK | WM8903_GP1_LVL_MASK;
|
|
val = (WM8903_GPn_FN_GPIO_OUTPUT << WM8903_GP1_FN_SHIFT) |
|
|
(value << WM8903_GP2_LVL_SHIFT);
|
|
|
|
ret = regmap_update_bits(wm8903->regmap,
|
|
WM8903_GPIO_CONTROL_1 + offset, mask, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wm8903_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
|
|
|
|
regmap_update_bits(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset,
|
|
WM8903_GP1_LVL_MASK,
|
|
!!value << WM8903_GP1_LVL_SHIFT);
|
|
}
|
|
|
|
static struct gpio_chip wm8903_template_chip = {
|
|
.label = "wm8903",
|
|
.owner = THIS_MODULE,
|
|
.request = wm8903_gpio_request,
|
|
.direction_input = wm8903_gpio_direction_in,
|
|
.get = wm8903_gpio_get,
|
|
.direction_output = wm8903_gpio_direction_out,
|
|
.set = wm8903_gpio_set,
|
|
.can_sleep = 1,
|
|
};
|
|
|
|
static void wm8903_init_gpio(struct wm8903_priv *wm8903)
|
|
{
|
|
struct wm8903_platform_data *pdata = wm8903->pdata;
|
|
int ret;
|
|
|
|
wm8903->gpio_chip = wm8903_template_chip;
|
|
wm8903->gpio_chip.ngpio = WM8903_NUM_GPIO;
|
|
wm8903->gpio_chip.dev = wm8903->dev;
|
|
|
|
if (pdata->gpio_base)
|
|
wm8903->gpio_chip.base = pdata->gpio_base;
|
|
else
|
|
wm8903->gpio_chip.base = -1;
|
|
|
|
ret = gpiochip_add(&wm8903->gpio_chip);
|
|
if (ret != 0)
|
|
dev_err(wm8903->dev, "Failed to add GPIOs: %d\n", ret);
|
|
}
|
|
|
|
static void wm8903_free_gpio(struct wm8903_priv *wm8903)
|
|
{
|
|
int ret;
|
|
|
|
ret = gpiochip_remove(&wm8903->gpio_chip);
|
|
if (ret != 0)
|
|
dev_err(wm8903->dev, "Failed to remove GPIOs: %d\n", ret);
|
|
}
|
|
#else
|
|
static void wm8903_init_gpio(struct wm8903_priv *wm8903)
|
|
{
|
|
}
|
|
|
|
static void wm8903_free_gpio(struct wm8903_priv *wm8903)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static int wm8903_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
wm8903->codec = codec;
|
|
|
|
/* power on device */
|
|
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* power down chip */
|
|
static int wm8903_remove(struct snd_soc_codec *codec)
|
|
{
|
|
wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_codec_driver soc_codec_dev_wm8903 = {
|
|
.probe = wm8903_probe,
|
|
.remove = wm8903_remove,
|
|
.suspend = wm8903_suspend,
|
|
.resume = wm8903_resume,
|
|
.set_bias_level = wm8903_set_bias_level,
|
|
.seq_notifier = wm8903_seq_notifier,
|
|
.controls = wm8903_snd_controls,
|
|
.num_controls = ARRAY_SIZE(wm8903_snd_controls),
|
|
.dapm_widgets = wm8903_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets),
|
|
.dapm_routes = wm8903_intercon,
|
|
.num_dapm_routes = ARRAY_SIZE(wm8903_intercon),
|
|
};
|
|
|
|
static const struct regmap_config wm8903_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
|
|
.max_register = WM8903_MAX_REGISTER,
|
|
.volatile_reg = wm8903_volatile_register,
|
|
.readable_reg = wm8903_readable_register,
|
|
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.reg_defaults = wm8903_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(wm8903_reg_defaults),
|
|
};
|
|
|
|
static int wm8903_set_pdata_irq_trigger(struct i2c_client *i2c,
|
|
struct wm8903_platform_data *pdata)
|
|
{
|
|
struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
|
|
if (!irq_data) {
|
|
dev_err(&i2c->dev, "Invalid IRQ: %d\n",
|
|
i2c->irq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (irqd_get_trigger_type(irq_data)) {
|
|
case IRQ_TYPE_NONE:
|
|
default:
|
|
/*
|
|
* We assume the controller imposes no restrictions,
|
|
* so we are able to select active-high
|
|
*/
|
|
/* Fall-through */
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
pdata->irq_active_low = false;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
pdata->irq_active_low = true;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_set_pdata_from_of(struct i2c_client *i2c,
|
|
struct wm8903_platform_data *pdata)
|
|
{
|
|
const struct device_node *np = i2c->dev.of_node;
|
|
u32 val32;
|
|
int i;
|
|
|
|
if (of_property_read_u32(np, "micdet-cfg", &val32) >= 0)
|
|
pdata->micdet_cfg = val32;
|
|
|
|
if (of_property_read_u32(np, "micdet-delay", &val32) >= 0)
|
|
pdata->micdet_delay = val32;
|
|
|
|
if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_cfg,
|
|
ARRAY_SIZE(pdata->gpio_cfg)) >= 0) {
|
|
/*
|
|
* In device tree: 0 means "write 0",
|
|
* 0xffffffff means "don't touch".
|
|
*
|
|
* In platform data: 0 means "don't touch",
|
|
* 0x8000 means "write 0".
|
|
*
|
|
* Note: WM8903_GPIO_CONFIG_ZERO == 0x8000.
|
|
*
|
|
* Convert from DT to pdata representation here,
|
|
* so no other code needs to change.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
|
|
if (pdata->gpio_cfg[i] == 0) {
|
|
pdata->gpio_cfg[i] = WM8903_GPIO_CONFIG_ZERO;
|
|
} else if (pdata->gpio_cfg[i] == 0xffffffff) {
|
|
pdata->gpio_cfg[i] = 0;
|
|
} else if (pdata->gpio_cfg[i] > 0x7fff) {
|
|
dev_err(&i2c->dev, "Invalid gpio-cfg[%d] %x\n",
|
|
i, pdata->gpio_cfg[i]);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev);
|
|
struct wm8903_priv *wm8903;
|
|
int trigger;
|
|
bool mic_gpio = false;
|
|
unsigned int val, irq_pol;
|
|
int ret, i;
|
|
|
|
wm8903 = devm_kzalloc(&i2c->dev, sizeof(struct wm8903_priv),
|
|
GFP_KERNEL);
|
|
if (wm8903 == NULL)
|
|
return -ENOMEM;
|
|
wm8903->dev = &i2c->dev;
|
|
|
|
wm8903->regmap = devm_regmap_init_i2c(i2c, &wm8903_regmap);
|
|
if (IS_ERR(wm8903->regmap)) {
|
|
ret = PTR_ERR(wm8903->regmap);
|
|
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
i2c_set_clientdata(i2c, wm8903);
|
|
|
|
/* If no platform data was supplied, create storage for defaults */
|
|
if (pdata) {
|
|
wm8903->pdata = pdata;
|
|
} else {
|
|
wm8903->pdata = devm_kzalloc(&i2c->dev,
|
|
sizeof(struct wm8903_platform_data),
|
|
GFP_KERNEL);
|
|
if (wm8903->pdata == NULL) {
|
|
dev_err(&i2c->dev, "Failed to allocate pdata\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (i2c->irq) {
|
|
ret = wm8903_set_pdata_irq_trigger(i2c, wm8903->pdata);
|
|
if (ret != 0)
|
|
return ret;
|
|
}
|
|
|
|
if (i2c->dev.of_node) {
|
|
ret = wm8903_set_pdata_from_of(i2c, wm8903->pdata);
|
|
if (ret != 0)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
pdata = wm8903->pdata;
|
|
|
|
ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
|
|
goto err;
|
|
}
|
|
if (val != 0x8903) {
|
|
dev_err(&i2c->dev, "Device with ID %x is not a WM8903\n", val);
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_read(wm8903->regmap, WM8903_REVISION_NUMBER, &val);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret);
|
|
goto err;
|
|
}
|
|
dev_info(&i2c->dev, "WM8903 revision %c\n",
|
|
(val & WM8903_CHIP_REV_MASK) + 'A');
|
|
|
|
/* Reset the device */
|
|
regmap_write(wm8903->regmap, WM8903_SW_RESET_AND_ID, 0x8903);
|
|
|
|
wm8903_init_gpio(wm8903);
|
|
|
|
/* Set up GPIO pin state, detect if any are MIC detect outputs */
|
|
for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
|
|
if ((!pdata->gpio_cfg[i]) ||
|
|
(pdata->gpio_cfg[i] > WM8903_GPIO_CONFIG_ZERO))
|
|
continue;
|
|
|
|
regmap_write(wm8903->regmap, WM8903_GPIO_CONTROL_1 + i,
|
|
pdata->gpio_cfg[i] & 0x7fff);
|
|
|
|
val = (pdata->gpio_cfg[i] & WM8903_GP1_FN_MASK)
|
|
>> WM8903_GP1_FN_SHIFT;
|
|
|
|
switch (val) {
|
|
case WM8903_GPn_FN_MICBIAS_CURRENT_DETECT:
|
|
case WM8903_GPn_FN_MICBIAS_SHORT_DETECT:
|
|
mic_gpio = true;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Set up microphone detection */
|
|
regmap_write(wm8903->regmap, WM8903_MIC_BIAS_CONTROL_0,
|
|
pdata->micdet_cfg);
|
|
|
|
/* Microphone detection needs the WSEQ clock */
|
|
if (pdata->micdet_cfg)
|
|
regmap_update_bits(wm8903->regmap, WM8903_WRITE_SEQUENCER_0,
|
|
WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
|
|
|
|
/* If microphone detection is enabled by pdata but
|
|
* detected via IRQ then interrupts can be lost before
|
|
* the machine driver has set up microphone detection
|
|
* IRQs as the IRQs are clear on read. The detection
|
|
* will be enabled when the machine driver configures.
|
|
*/
|
|
WARN_ON(!mic_gpio && (pdata->micdet_cfg & WM8903_MICDET_ENA));
|
|
|
|
wm8903->mic_delay = pdata->micdet_delay;
|
|
|
|
if (i2c->irq) {
|
|
if (pdata->irq_active_low) {
|
|
trigger = IRQF_TRIGGER_LOW;
|
|
irq_pol = WM8903_IRQ_POL;
|
|
} else {
|
|
trigger = IRQF_TRIGGER_HIGH;
|
|
irq_pol = 0;
|
|
}
|
|
|
|
regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_CONTROL,
|
|
WM8903_IRQ_POL, irq_pol);
|
|
|
|
ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq,
|
|
trigger | IRQF_ONESHOT,
|
|
"wm8903", wm8903);
|
|
if (ret != 0) {
|
|
dev_err(wm8903->dev, "Failed to request IRQ: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Enable write sequencer interrupts */
|
|
regmap_update_bits(wm8903->regmap,
|
|
WM8903_INTERRUPT_STATUS_1_MASK,
|
|
WM8903_IM_WSEQ_BUSY_EINT, 0);
|
|
}
|
|
|
|
/* Latch volume update bits */
|
|
regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_LEFT,
|
|
WM8903_ADCVU, WM8903_ADCVU);
|
|
regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_RIGHT,
|
|
WM8903_ADCVU, WM8903_ADCVU);
|
|
|
|
regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_LEFT,
|
|
WM8903_DACVU, WM8903_DACVU);
|
|
regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_RIGHT,
|
|
WM8903_DACVU, WM8903_DACVU);
|
|
|
|
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_LEFT,
|
|
WM8903_HPOUTVU, WM8903_HPOUTVU);
|
|
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_RIGHT,
|
|
WM8903_HPOUTVU, WM8903_HPOUTVU);
|
|
|
|
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_LEFT,
|
|
WM8903_LINEOUTVU, WM8903_LINEOUTVU);
|
|
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_RIGHT,
|
|
WM8903_LINEOUTVU, WM8903_LINEOUTVU);
|
|
|
|
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_LEFT,
|
|
WM8903_SPKVU, WM8903_SPKVU);
|
|
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_RIGHT,
|
|
WM8903_SPKVU, WM8903_SPKVU);
|
|
|
|
/* Enable DAC soft mute by default */
|
|
regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_1,
|
|
WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE,
|
|
WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE);
|
|
|
|
ret = snd_soc_register_codec(&i2c->dev,
|
|
&soc_codec_dev_wm8903, &wm8903_dai, 1);
|
|
if (ret != 0)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int wm8903_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct wm8903_priv *wm8903 = i2c_get_clientdata(client);
|
|
|
|
if (client->irq)
|
|
free_irq(client->irq, wm8903);
|
|
wm8903_free_gpio(wm8903);
|
|
snd_soc_unregister_codec(&client->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id wm8903_of_match[] = {
|
|
{ .compatible = "wlf,wm8903", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, wm8903_of_match);
|
|
|
|
static const struct i2c_device_id wm8903_i2c_id[] = {
|
|
{ "wm8903", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id);
|
|
|
|
static struct i2c_driver wm8903_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm8903",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = wm8903_of_match,
|
|
},
|
|
.probe = wm8903_i2c_probe,
|
|
.remove = wm8903_i2c_remove,
|
|
.id_table = wm8903_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(wm8903_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM8903 driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>");
|
|
MODULE_LICENSE("GPL");
|