mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 23:46:40 +07:00
e0026beac0
Store the TDM slot width then if it's set use that rather than the sample size to calculate BCLK. Leave imposing constraints to the core (which should do this but doesn't yet) or machine driver. Also allow 0 TDM slots to be configure (for use when disabling TDM). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
1512 lines
37 KiB
C
1512 lines
37 KiB
C
/*
|
|
* wm9081.c -- WM9081 ALSA SoC Audio driver
|
|
*
|
|
* Author: Mark Brown
|
|
*
|
|
* Copyright 2009 Wolfson Microelectronics plc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include <sound/wm9081.h>
|
|
#include "wm9081.h"
|
|
|
|
static u16 wm9081_reg_defaults[] = {
|
|
0x0000, /* R0 - Software Reset */
|
|
0x0000, /* R1 */
|
|
0x00B9, /* R2 - Analogue Lineout */
|
|
0x00B9, /* R3 - Analogue Speaker PGA */
|
|
0x0001, /* R4 - VMID Control */
|
|
0x0068, /* R5 - Bias Control 1 */
|
|
0x0000, /* R6 */
|
|
0x0000, /* R7 - Analogue Mixer */
|
|
0x0000, /* R8 - Anti Pop Control */
|
|
0x01DB, /* R9 - Analogue Speaker 1 */
|
|
0x0018, /* R10 - Analogue Speaker 2 */
|
|
0x0180, /* R11 - Power Management */
|
|
0x0000, /* R12 - Clock Control 1 */
|
|
0x0038, /* R13 - Clock Control 2 */
|
|
0x4000, /* R14 - Clock Control 3 */
|
|
0x0000, /* R15 */
|
|
0x0000, /* R16 - FLL Control 1 */
|
|
0x0200, /* R17 - FLL Control 2 */
|
|
0x0000, /* R18 - FLL Control 3 */
|
|
0x0204, /* R19 - FLL Control 4 */
|
|
0x0000, /* R20 - FLL Control 5 */
|
|
0x0000, /* R21 */
|
|
0x0000, /* R22 - Audio Interface 1 */
|
|
0x0002, /* R23 - Audio Interface 2 */
|
|
0x0008, /* R24 - Audio Interface 3 */
|
|
0x0022, /* R25 - Audio Interface 4 */
|
|
0x0000, /* R26 - Interrupt Status */
|
|
0x0006, /* R27 - Interrupt Status Mask */
|
|
0x0000, /* R28 - Interrupt Polarity */
|
|
0x0000, /* R29 - Interrupt Control */
|
|
0x00C0, /* R30 - DAC Digital 1 */
|
|
0x0008, /* R31 - DAC Digital 2 */
|
|
0x09AF, /* R32 - DRC 1 */
|
|
0x4201, /* R33 - DRC 2 */
|
|
0x0000, /* R34 - DRC 3 */
|
|
0x0000, /* R35 - DRC 4 */
|
|
0x0000, /* R36 */
|
|
0x0000, /* R37 */
|
|
0x0000, /* R38 - Write Sequencer 1 */
|
|
0x0000, /* R39 - Write Sequencer 2 */
|
|
0x0002, /* R40 - MW Slave 1 */
|
|
0x0000, /* R41 */
|
|
0x0000, /* R42 - EQ 1 */
|
|
0x0000, /* R43 - EQ 2 */
|
|
0x0FCA, /* R44 - EQ 3 */
|
|
0x0400, /* R45 - EQ 4 */
|
|
0x00B8, /* R46 - EQ 5 */
|
|
0x1EB5, /* R47 - EQ 6 */
|
|
0xF145, /* R48 - EQ 7 */
|
|
0x0B75, /* R49 - EQ 8 */
|
|
0x01C5, /* R50 - EQ 9 */
|
|
0x169E, /* R51 - EQ 10 */
|
|
0xF829, /* R52 - EQ 11 */
|
|
0x07AD, /* R53 - EQ 12 */
|
|
0x1103, /* R54 - EQ 13 */
|
|
0x1C58, /* R55 - EQ 14 */
|
|
0xF373, /* R56 - EQ 15 */
|
|
0x0A54, /* R57 - EQ 16 */
|
|
0x0558, /* R58 - EQ 17 */
|
|
0x0564, /* R59 - EQ 18 */
|
|
0x0559, /* R60 - EQ 19 */
|
|
0x4000, /* R61 - EQ 20 */
|
|
};
|
|
|
|
static struct {
|
|
int ratio;
|
|
int clk_sys_rate;
|
|
} clk_sys_rates[] = {
|
|
{ 64, 0 },
|
|
{ 128, 1 },
|
|
{ 192, 2 },
|
|
{ 256, 3 },
|
|
{ 384, 4 },
|
|
{ 512, 5 },
|
|
{ 768, 6 },
|
|
{ 1024, 7 },
|
|
{ 1408, 8 },
|
|
{ 1536, 9 },
|
|
};
|
|
|
|
static struct {
|
|
int rate;
|
|
int sample_rate;
|
|
} sample_rates[] = {
|
|
{ 8000, 0 },
|
|
{ 11025, 1 },
|
|
{ 12000, 2 },
|
|
{ 16000, 3 },
|
|
{ 22050, 4 },
|
|
{ 24000, 5 },
|
|
{ 32000, 6 },
|
|
{ 44100, 7 },
|
|
{ 48000, 8 },
|
|
{ 88200, 9 },
|
|
{ 96000, 10 },
|
|
};
|
|
|
|
static struct {
|
|
int div; /* *10 due to .5s */
|
|
int bclk_div;
|
|
} bclk_divs[] = {
|
|
{ 10, 0 },
|
|
{ 15, 1 },
|
|
{ 20, 2 },
|
|
{ 30, 3 },
|
|
{ 40, 4 },
|
|
{ 50, 5 },
|
|
{ 55, 6 },
|
|
{ 60, 7 },
|
|
{ 80, 8 },
|
|
{ 100, 9 },
|
|
{ 110, 10 },
|
|
{ 120, 11 },
|
|
{ 160, 12 },
|
|
{ 200, 13 },
|
|
{ 220, 14 },
|
|
{ 240, 15 },
|
|
{ 250, 16 },
|
|
{ 300, 17 },
|
|
{ 320, 18 },
|
|
{ 440, 19 },
|
|
{ 480, 20 },
|
|
};
|
|
|
|
struct wm9081_priv {
|
|
struct snd_soc_codec codec;
|
|
u16 reg_cache[WM9081_MAX_REGISTER + 1];
|
|
int sysclk_source;
|
|
int mclk_rate;
|
|
int sysclk_rate;
|
|
int fs;
|
|
int bclk;
|
|
int master;
|
|
int fll_fref;
|
|
int fll_fout;
|
|
int tdm_width;
|
|
struct wm9081_retune_mobile_config *retune;
|
|
};
|
|
|
|
static int wm9081_volatile_register(unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case WM9081_SOFTWARE_RESET:
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int wm9081_reset(struct snd_soc_codec *codec)
|
|
{
|
|
return snd_soc_write(codec, WM9081_SOFTWARE_RESET, 0);
|
|
}
|
|
|
|
static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
|
|
static unsigned int drc_max_tlv[] = {
|
|
TLV_DB_RANGE_HEAD(4),
|
|
0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0),
|
|
1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0),
|
|
2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
|
|
3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
|
|
};
|
|
static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0);
|
|
|
|
static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
|
|
|
|
static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0);
|
|
static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1);
|
|
static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
|
|
|
|
static const char *drc_high_text[] = {
|
|
"1",
|
|
"1/2",
|
|
"1/4",
|
|
"1/8",
|
|
"1/16",
|
|
"0",
|
|
};
|
|
|
|
static const struct soc_enum drc_high =
|
|
SOC_ENUM_SINGLE(WM9081_DRC_3, 3, 6, drc_high_text);
|
|
|
|
static const char *drc_low_text[] = {
|
|
"1",
|
|
"1/2",
|
|
"1/4",
|
|
"1/8",
|
|
"0",
|
|
};
|
|
|
|
static const struct soc_enum drc_low =
|
|
SOC_ENUM_SINGLE(WM9081_DRC_3, 0, 5, drc_low_text);
|
|
|
|
static const char *drc_atk_text[] = {
|
|
"181us",
|
|
"181us",
|
|
"363us",
|
|
"726us",
|
|
"1.45ms",
|
|
"2.9ms",
|
|
"5.8ms",
|
|
"11.6ms",
|
|
"23.2ms",
|
|
"46.4ms",
|
|
"92.8ms",
|
|
"185.6ms",
|
|
};
|
|
|
|
static const struct soc_enum drc_atk =
|
|
SOC_ENUM_SINGLE(WM9081_DRC_2, 12, 12, drc_atk_text);
|
|
|
|
static const char *drc_dcy_text[] = {
|
|
"186ms",
|
|
"372ms",
|
|
"743ms",
|
|
"1.49s",
|
|
"2.97s",
|
|
"5.94s",
|
|
"11.89s",
|
|
"23.78s",
|
|
"47.56s",
|
|
};
|
|
|
|
static const struct soc_enum drc_dcy =
|
|
SOC_ENUM_SINGLE(WM9081_DRC_2, 8, 9, drc_dcy_text);
|
|
|
|
static const char *drc_qr_dcy_text[] = {
|
|
"0.725ms",
|
|
"1.45ms",
|
|
"5.8ms",
|
|
};
|
|
|
|
static const struct soc_enum drc_qr_dcy =
|
|
SOC_ENUM_SINGLE(WM9081_DRC_2, 4, 3, drc_qr_dcy_text);
|
|
|
|
static const char *dac_deemph_text[] = {
|
|
"None",
|
|
"32kHz",
|
|
"44.1kHz",
|
|
"48kHz",
|
|
};
|
|
|
|
static const struct soc_enum dac_deemph =
|
|
SOC_ENUM_SINGLE(WM9081_DAC_DIGITAL_2, 1, 4, dac_deemph_text);
|
|
|
|
static const char *speaker_mode_text[] = {
|
|
"Class D",
|
|
"Class AB",
|
|
};
|
|
|
|
static const struct soc_enum speaker_mode =
|
|
SOC_ENUM_SINGLE(WM9081_ANALOGUE_SPEAKER_2, 6, 2, speaker_mode_text);
|
|
|
|
static int speaker_mode_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
unsigned int reg;
|
|
|
|
reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2);
|
|
if (reg & WM9081_SPK_MODE)
|
|
ucontrol->value.integer.value[0] = 1;
|
|
else
|
|
ucontrol->value.integer.value[0] = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Stop any attempts to change speaker mode while the speaker is enabled.
|
|
*
|
|
* We also have some special anti-pop controls dependant on speaker
|
|
* mode which must be changed along with the mode.
|
|
*/
|
|
static int speaker_mode_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
unsigned int reg_pwr = snd_soc_read(codec, WM9081_POWER_MANAGEMENT);
|
|
unsigned int reg2 = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2);
|
|
|
|
/* Are we changing anything? */
|
|
if (ucontrol->value.integer.value[0] ==
|
|
((reg2 & WM9081_SPK_MODE) != 0))
|
|
return 0;
|
|
|
|
/* Don't try to change modes while enabled */
|
|
if (reg_pwr & WM9081_SPK_ENA)
|
|
return -EINVAL;
|
|
|
|
if (ucontrol->value.integer.value[0]) {
|
|
/* Class AB */
|
|
reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL);
|
|
reg2 |= WM9081_SPK_MODE;
|
|
} else {
|
|
/* Class D */
|
|
reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL;
|
|
reg2 &= ~WM9081_SPK_MODE;
|
|
}
|
|
|
|
snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_kcontrol_new wm9081_snd_controls[] = {
|
|
SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv),
|
|
SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv),
|
|
|
|
SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv),
|
|
|
|
SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1),
|
|
SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0),
|
|
SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv),
|
|
|
|
SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0),
|
|
SOC_ENUM("DRC High Slope", drc_high),
|
|
SOC_ENUM("DRC Low Slope", drc_low),
|
|
SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv),
|
|
SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv),
|
|
SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv),
|
|
SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv),
|
|
SOC_ENUM("DRC Attack", drc_atk),
|
|
SOC_ENUM("DRC Decay", drc_dcy),
|
|
SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0),
|
|
SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv),
|
|
SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy),
|
|
SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv),
|
|
|
|
SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0),
|
|
|
|
SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0),
|
|
SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0),
|
|
SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1),
|
|
SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0),
|
|
SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0,
|
|
out_tlv),
|
|
SOC_ENUM("DAC Deemphasis", dac_deemph),
|
|
SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm9081_eq_controls[] = {
|
|
SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv),
|
|
SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv),
|
|
SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv),
|
|
SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv),
|
|
SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new mixer[] = {
|
|
SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0),
|
|
SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0),
|
|
SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0),
|
|
};
|
|
|
|
static int speaker_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_codec *codec = w->codec;
|
|
unsigned int reg = snd_soc_read(codec, WM9081_POWER_MANAGEMENT);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_POST_PMU:
|
|
reg |= WM9081_SPK_ENA;
|
|
break;
|
|
|
|
case SND_SOC_DAPM_PRE_PMD:
|
|
reg &= ~WM9081_SPK_ENA;
|
|
break;
|
|
}
|
|
|
|
snd_soc_write(codec, WM9081_POWER_MANAGEMENT, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct _fll_div {
|
|
u16 fll_fratio;
|
|
u16 fll_outdiv;
|
|
u16 fll_clk_ref_div;
|
|
u16 n;
|
|
u16 k;
|
|
};
|
|
|
|
/* The size in bits of the FLL divide multiplied by 10
|
|
* to allow rounding later */
|
|
#define FIXED_FLL_SIZE ((1 << 16) * 10)
|
|
|
|
static struct {
|
|
unsigned int min;
|
|
unsigned int max;
|
|
u16 fll_fratio;
|
|
int ratio;
|
|
} fll_fratios[] = {
|
|
{ 0, 64000, 4, 16 },
|
|
{ 64000, 128000, 3, 8 },
|
|
{ 128000, 256000, 2, 4 },
|
|
{ 256000, 1000000, 1, 2 },
|
|
{ 1000000, 13500000, 0, 1 },
|
|
};
|
|
|
|
static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
|
|
unsigned int Fout)
|
|
{
|
|
u64 Kpart;
|
|
unsigned int K, Ndiv, Nmod, target;
|
|
unsigned int div;
|
|
int i;
|
|
|
|
/* Fref must be <=13.5MHz */
|
|
div = 1;
|
|
while ((Fref / div) > 13500000) {
|
|
div *= 2;
|
|
|
|
if (div > 8) {
|
|
pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
|
|
Fref);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
fll_div->fll_clk_ref_div = div / 2;
|
|
|
|
pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
|
|
|
|
/* Apply the division for our remaining calculations */
|
|
Fref /= div;
|
|
|
|
/* Fvco should be 90-100MHz; don't check the upper bound */
|
|
div = 0;
|
|
target = Fout * 2;
|
|
while (target < 90000000) {
|
|
div++;
|
|
target *= 2;
|
|
if (div > 7) {
|
|
pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
|
|
Fout);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
fll_div->fll_outdiv = div;
|
|
|
|
pr_debug("Fvco=%dHz\n", target);
|
|
|
|
/* Find an appropraite FLL_FRATIO and factor it out of the target */
|
|
for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
|
|
if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
|
|
fll_div->fll_fratio = fll_fratios[i].fll_fratio;
|
|
target /= fll_fratios[i].ratio;
|
|
break;
|
|
}
|
|
}
|
|
if (i == ARRAY_SIZE(fll_fratios)) {
|
|
pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Now, calculate N.K */
|
|
Ndiv = target / Fref;
|
|
|
|
fll_div->n = Ndiv;
|
|
Nmod = target % Fref;
|
|
pr_debug("Nmod=%d\n", Nmod);
|
|
|
|
/* Calculate fractional part - scale up so we can round. */
|
|
Kpart = FIXED_FLL_SIZE * (long long)Nmod;
|
|
|
|
do_div(Kpart, Fref);
|
|
|
|
K = Kpart & 0xFFFFFFFF;
|
|
|
|
if ((K % 10) >= 5)
|
|
K += 5;
|
|
|
|
/* Move down to proper range now rounding is done */
|
|
fll_div->k = K / 10;
|
|
|
|
pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
|
|
fll_div->n, fll_div->k,
|
|
fll_div->fll_fratio, fll_div->fll_outdiv,
|
|
fll_div->fll_clk_ref_div);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id,
|
|
unsigned int Fref, unsigned int Fout)
|
|
{
|
|
struct wm9081_priv *wm9081 = codec->private_data;
|
|
u16 reg1, reg4, reg5;
|
|
struct _fll_div fll_div;
|
|
int ret;
|
|
int clk_sys_reg;
|
|
|
|
/* Any change? */
|
|
if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout)
|
|
return 0;
|
|
|
|
/* Disable the FLL */
|
|
if (Fout == 0) {
|
|
dev_dbg(codec->dev, "FLL disabled\n");
|
|
wm9081->fll_fref = 0;
|
|
wm9081->fll_fout = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
ret = fll_factors(&fll_div, Fref, Fout);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
reg5 = snd_soc_read(codec, WM9081_FLL_CONTROL_5);
|
|
reg5 &= ~WM9081_FLL_CLK_SRC_MASK;
|
|
|
|
switch (fll_id) {
|
|
case WM9081_SYSCLK_FLL_MCLK:
|
|
reg5 |= 0x1;
|
|
break;
|
|
|
|
default:
|
|
dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Disable CLK_SYS while we reconfigure */
|
|
clk_sys_reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3);
|
|
if (clk_sys_reg & WM9081_CLK_SYS_ENA)
|
|
snd_soc_write(codec, WM9081_CLOCK_CONTROL_3,
|
|
clk_sys_reg & ~WM9081_CLK_SYS_ENA);
|
|
|
|
/* Any FLL configuration change requires that the FLL be
|
|
* disabled first. */
|
|
reg1 = snd_soc_read(codec, WM9081_FLL_CONTROL_1);
|
|
reg1 &= ~WM9081_FLL_ENA;
|
|
snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1);
|
|
|
|
/* Apply the configuration */
|
|
if (fll_div.k)
|
|
reg1 |= WM9081_FLL_FRAC_MASK;
|
|
else
|
|
reg1 &= ~WM9081_FLL_FRAC_MASK;
|
|
snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1);
|
|
|
|
snd_soc_write(codec, WM9081_FLL_CONTROL_2,
|
|
(fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) |
|
|
(fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT));
|
|
snd_soc_write(codec, WM9081_FLL_CONTROL_3, fll_div.k);
|
|
|
|
reg4 = snd_soc_read(codec, WM9081_FLL_CONTROL_4);
|
|
reg4 &= ~WM9081_FLL_N_MASK;
|
|
reg4 |= fll_div.n << WM9081_FLL_N_SHIFT;
|
|
snd_soc_write(codec, WM9081_FLL_CONTROL_4, reg4);
|
|
|
|
reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK;
|
|
reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT;
|
|
snd_soc_write(codec, WM9081_FLL_CONTROL_5, reg5);
|
|
|
|
/* Enable the FLL */
|
|
snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
|
|
|
|
/* Then bring CLK_SYS up again if it was disabled */
|
|
if (clk_sys_reg & WM9081_CLK_SYS_ENA)
|
|
snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
|
|
|
|
dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
|
|
|
|
wm9081->fll_fref = Fref;
|
|
wm9081->fll_fout = Fout;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int configure_clock(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm9081_priv *wm9081 = codec->private_data;
|
|
int new_sysclk, i, target;
|
|
unsigned int reg;
|
|
int ret = 0;
|
|
int mclkdiv = 0;
|
|
int fll = 0;
|
|
|
|
switch (wm9081->sysclk_source) {
|
|
case WM9081_SYSCLK_MCLK:
|
|
if (wm9081->mclk_rate > 12225000) {
|
|
mclkdiv = 1;
|
|
wm9081->sysclk_rate = wm9081->mclk_rate / 2;
|
|
} else {
|
|
wm9081->sysclk_rate = wm9081->mclk_rate;
|
|
}
|
|
wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0);
|
|
break;
|
|
|
|
case WM9081_SYSCLK_FLL_MCLK:
|
|
/* If we have a sample rate calculate a CLK_SYS that
|
|
* gives us a suitable DAC configuration, plus BCLK.
|
|
* Ideally we would check to see if we can clock
|
|
* directly from MCLK and only use the FLL if this is
|
|
* not the case, though care must be taken with free
|
|
* running mode.
|
|
*/
|
|
if (wm9081->master && wm9081->bclk) {
|
|
/* Make sure we can generate CLK_SYS and BCLK
|
|
* and that we've got 3MHz for optimal
|
|
* performance. */
|
|
for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
|
|
target = wm9081->fs * clk_sys_rates[i].ratio;
|
|
new_sysclk = target;
|
|
if (target >= wm9081->bclk &&
|
|
target > 3000000)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(clk_sys_rates))
|
|
return -EINVAL;
|
|
|
|
} else if (wm9081->fs) {
|
|
for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
|
|
new_sysclk = clk_sys_rates[i].ratio
|
|
* wm9081->fs;
|
|
if (new_sysclk > 3000000)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(clk_sys_rates))
|
|
return -EINVAL;
|
|
|
|
} else {
|
|
new_sysclk = 12288000;
|
|
}
|
|
|
|
ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK,
|
|
wm9081->mclk_rate, new_sysclk);
|
|
if (ret == 0) {
|
|
wm9081->sysclk_rate = new_sysclk;
|
|
|
|
/* Switch SYSCLK over to FLL */
|
|
fll = 1;
|
|
} else {
|
|
wm9081->sysclk_rate = wm9081->mclk_rate;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_1);
|
|
if (mclkdiv)
|
|
reg |= WM9081_MCLKDIV2;
|
|
else
|
|
reg &= ~WM9081_MCLKDIV2;
|
|
snd_soc_write(codec, WM9081_CLOCK_CONTROL_1, reg);
|
|
|
|
reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3);
|
|
if (fll)
|
|
reg |= WM9081_CLK_SRC_SEL;
|
|
else
|
|
reg &= ~WM9081_CLK_SRC_SEL;
|
|
snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, reg);
|
|
|
|
dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int clk_sys_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_codec *codec = w->codec;
|
|
struct wm9081_priv *wm9081 = codec->private_data;
|
|
|
|
/* This should be done on init() for bypass paths */
|
|
switch (wm9081->sysclk_source) {
|
|
case WM9081_SYSCLK_MCLK:
|
|
dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate);
|
|
break;
|
|
case WM9081_SYSCLK_FLL_MCLK:
|
|
dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n",
|
|
wm9081->mclk_rate);
|
|
break;
|
|
default:
|
|
dev_err(codec->dev, "System clock not configured\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
configure_clock(codec);
|
|
break;
|
|
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
/* Disable the FLL if it's running */
|
|
wm9081_set_fll(codec, 0, 0, 0);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = {
|
|
SND_SOC_DAPM_INPUT("IN1"),
|
|
SND_SOC_DAPM_INPUT("IN2"),
|
|
|
|
SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM9081_POWER_MANAGEMENT, 0, 0),
|
|
|
|
SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0,
|
|
mixer, ARRAY_SIZE(mixer)),
|
|
|
|
SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_PGA_E("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0,
|
|
speaker_event,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
|
|
SND_SOC_DAPM_OUTPUT("LINEOUT"),
|
|
SND_SOC_DAPM_OUTPUT("SPKN"),
|
|
SND_SOC_DAPM_OUTPUT("SPKP"),
|
|
|
|
SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
|
SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0),
|
|
SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0),
|
|
};
|
|
|
|
|
|
static const struct snd_soc_dapm_route audio_paths[] = {
|
|
{ "DAC", NULL, "CLK_SYS" },
|
|
{ "DAC", NULL, "CLK_DSP" },
|
|
|
|
{ "Mixer", "IN1 Switch", "IN1" },
|
|
{ "Mixer", "IN2 Switch", "IN2" },
|
|
{ "Mixer", "Playback Switch", "DAC" },
|
|
|
|
{ "LINEOUT PGA", NULL, "Mixer" },
|
|
{ "LINEOUT PGA", NULL, "TOCLK" },
|
|
{ "LINEOUT PGA", NULL, "CLK_SYS" },
|
|
|
|
{ "LINEOUT", NULL, "LINEOUT PGA" },
|
|
|
|
{ "Speaker PGA", NULL, "Mixer" },
|
|
{ "Speaker PGA", NULL, "TOCLK" },
|
|
{ "Speaker PGA", NULL, "CLK_SYS" },
|
|
|
|
{ "SPKN", NULL, "Speaker PGA" },
|
|
{ "SPKP", NULL, "Speaker PGA" },
|
|
};
|
|
|
|
static int wm9081_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
u16 reg;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_PREPARE:
|
|
/* VMID=2*40k */
|
|
reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
|
|
reg &= ~WM9081_VMID_SEL_MASK;
|
|
reg |= 0x2;
|
|
snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
|
|
|
|
/* Normal bias current */
|
|
reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
|
|
reg &= ~WM9081_STBY_BIAS_ENA;
|
|
snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
/* Initial cold start */
|
|
if (codec->bias_level == SND_SOC_BIAS_OFF) {
|
|
/* Disable LINEOUT discharge */
|
|
reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
|
|
reg &= ~WM9081_LINEOUT_DISCH;
|
|
snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
|
|
|
|
/* Select startup bias source */
|
|
reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
|
|
reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
|
|
snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
|
|
|
|
/* VMID 2*4k; Soft VMID ramp enable */
|
|
reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
|
|
reg |= WM9081_VMID_RAMP | 0x6;
|
|
snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
|
|
|
|
mdelay(100);
|
|
|
|
/* Normal bias enable & soft start off */
|
|
reg |= WM9081_BIAS_ENA;
|
|
reg &= ~WM9081_VMID_RAMP;
|
|
snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
|
|
|
|
/* Standard bias source */
|
|
reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
|
|
reg &= ~WM9081_BIAS_SRC;
|
|
snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
|
|
}
|
|
|
|
/* VMID 2*240k */
|
|
reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
|
|
reg &= ~WM9081_VMID_SEL_MASK;
|
|
reg |= 0x40;
|
|
snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
|
|
|
|
/* Standby bias current on */
|
|
reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
|
|
reg |= WM9081_STBY_BIAS_ENA;
|
|
snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
/* Startup bias source */
|
|
reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
|
|
reg |= WM9081_BIAS_SRC;
|
|
snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
|
|
|
|
/* Disable VMID and biases with soft ramping */
|
|
reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
|
|
reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
|
|
reg |= WM9081_VMID_RAMP;
|
|
snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
|
|
|
|
/* Actively discharge LINEOUT */
|
|
reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
|
|
reg |= WM9081_LINEOUT_DISCH;
|
|
snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
|
|
break;
|
|
}
|
|
|
|
codec->bias_level = level;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm9081_set_dai_fmt(struct snd_soc_dai *dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct wm9081_priv *wm9081 = codec->private_data;
|
|
unsigned int aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2);
|
|
|
|
aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV |
|
|
WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
wm9081->master = 0;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
aif2 |= WM9081_LRCLK_DIR;
|
|
wm9081->master = 1;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
aif2 |= WM9081_BCLK_DIR;
|
|
wm9081->master = 1;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR;
|
|
wm9081->master = 1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
aif2 |= WM9081_AIF_LRCLK_INV;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
aif2 |= 0x3;
|
|
break;
|
|
case SND_SOC_DAIFMT_I2S:
|
|
aif2 |= 0x2;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
aif2 |= 0x1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
/* frame inversion not valid for DSP modes */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif2 |= WM9081_AIF_BCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_I2S:
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif2 |= WM9081_AIF_BCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
aif2 |= WM9081_AIF_LRCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm9081_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct wm9081_priv *wm9081 = codec->private_data;
|
|
int ret, i, best, best_val, cur_val;
|
|
unsigned int clk_ctrl2, aif1, aif2, aif3, aif4;
|
|
|
|
clk_ctrl2 = snd_soc_read(codec, WM9081_CLOCK_CONTROL_2);
|
|
clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK);
|
|
|
|
aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1);
|
|
|
|
aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2);
|
|
aif2 &= ~WM9081_AIF_WL_MASK;
|
|
|
|
aif3 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_3);
|
|
aif3 &= ~WM9081_BCLK_DIV_MASK;
|
|
|
|
aif4 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_4);
|
|
aif4 &= ~WM9081_LRCLK_RATE_MASK;
|
|
|
|
wm9081->fs = params_rate(params);
|
|
|
|
if (wm9081->tdm_width) {
|
|
/* If TDM is set up then that fixes our BCLK. */
|
|
int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >>
|
|
WM9081_AIFDAC_TDM_MODE_SHIFT) + 1;
|
|
|
|
wm9081->bclk = wm9081->fs * wm9081->tdm_width * slots;
|
|
} else {
|
|
/* Otherwise work out a BCLK from the sample size */
|
|
wm9081->bclk = 2 * wm9081->fs;
|
|
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
wm9081->bclk *= 16;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
wm9081->bclk *= 20;
|
|
aif2 |= 0x4;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
wm9081->bclk *= 24;
|
|
aif2 |= 0x8;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
wm9081->bclk *= 32;
|
|
aif2 |= 0xc;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk);
|
|
|
|
ret = configure_clock(codec);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
/* Select nearest CLK_SYS_RATE */
|
|
best = 0;
|
|
best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio)
|
|
- wm9081->fs);
|
|
for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
|
|
cur_val = abs((wm9081->sysclk_rate /
|
|
clk_sys_rates[i].ratio) - wm9081->fs);;
|
|
if (cur_val < best_val) {
|
|
best = i;
|
|
best_val = cur_val;
|
|
}
|
|
}
|
|
dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
|
|
clk_sys_rates[best].ratio);
|
|
clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate
|
|
<< WM9081_CLK_SYS_RATE_SHIFT);
|
|
|
|
/* SAMPLE_RATE */
|
|
best = 0;
|
|
best_val = abs(wm9081->fs - sample_rates[0].rate);
|
|
for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
|
|
/* Closest match */
|
|
cur_val = abs(wm9081->fs - sample_rates[i].rate);
|
|
if (cur_val < best_val) {
|
|
best = i;
|
|
best_val = cur_val;
|
|
}
|
|
}
|
|
dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
|
|
sample_rates[best].rate);
|
|
clk_ctrl2 |= (sample_rates[best].sample_rate
|
|
<< WM9081_SAMPLE_RATE_SHIFT);
|
|
|
|
/* BCLK_DIV */
|
|
best = 0;
|
|
best_val = INT_MAX;
|
|
for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
|
|
cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div)
|
|
- wm9081->bclk;
|
|
if (cur_val < 0) /* Table is sorted */
|
|
break;
|
|
if (cur_val < best_val) {
|
|
best = i;
|
|
best_val = cur_val;
|
|
}
|
|
}
|
|
wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div;
|
|
dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
|
|
bclk_divs[best].div, wm9081->bclk);
|
|
aif3 |= bclk_divs[best].bclk_div;
|
|
|
|
/* LRCLK is a simple fraction of BCLK */
|
|
dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs);
|
|
aif4 |= wm9081->bclk / wm9081->fs;
|
|
|
|
/* Apply a ReTune Mobile configuration if it's in use */
|
|
if (wm9081->retune) {
|
|
struct wm9081_retune_mobile_config *retune = wm9081->retune;
|
|
struct wm9081_retune_mobile_setting *s;
|
|
int eq1;
|
|
|
|
best = 0;
|
|
best_val = abs(retune->configs[0].rate - wm9081->fs);
|
|
for (i = 0; i < retune->num_configs; i++) {
|
|
cur_val = abs(retune->configs[i].rate - wm9081->fs);
|
|
if (cur_val < best_val) {
|
|
best_val = cur_val;
|
|
best = i;
|
|
}
|
|
}
|
|
s = &retune->configs[best];
|
|
|
|
dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
|
|
s->name, s->rate);
|
|
|
|
/* If the EQ is enabled then disable it while we write out */
|
|
eq1 = snd_soc_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA;
|
|
if (eq1 & WM9081_EQ_ENA)
|
|
snd_soc_write(codec, WM9081_EQ_1, 0);
|
|
|
|
/* Write out the other values */
|
|
for (i = 1; i < ARRAY_SIZE(s->config); i++)
|
|
snd_soc_write(codec, WM9081_EQ_1 + i, s->config[i]);
|
|
|
|
eq1 |= (s->config[0] & ~WM9081_EQ_ENA);
|
|
snd_soc_write(codec, WM9081_EQ_1, eq1);
|
|
}
|
|
|
|
snd_soc_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
|
|
snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
|
|
snd_soc_write(codec, WM9081_AUDIO_INTERFACE_3, aif3);
|
|
snd_soc_write(codec, WM9081_AUDIO_INTERFACE_4, aif4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
unsigned int reg;
|
|
|
|
reg = snd_soc_read(codec, WM9081_DAC_DIGITAL_2);
|
|
|
|
if (mute)
|
|
reg |= WM9081_DAC_MUTE;
|
|
else
|
|
reg &= ~WM9081_DAC_MUTE;
|
|
|
|
snd_soc_write(codec, WM9081_DAC_DIGITAL_2, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm9081_set_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct wm9081_priv *wm9081 = codec->private_data;
|
|
|
|
switch (clk_id) {
|
|
case WM9081_SYSCLK_MCLK:
|
|
case WM9081_SYSCLK_FLL_MCLK:
|
|
wm9081->sysclk_source = clk_id;
|
|
wm9081->mclk_rate = freq;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm9081_set_tdm_slot(struct snd_soc_dai *dai,
|
|
unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct wm9081_priv *wm9081 = codec->private_data;
|
|
unsigned int aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1);
|
|
|
|
aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK);
|
|
|
|
if (slots < 0 || slots > 4)
|
|
return -EINVAL;
|
|
|
|
wm9081->tdm_width = slot_width;
|
|
|
|
if (slots == 0)
|
|
slots = 1;
|
|
|
|
aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT;
|
|
|
|
switch (rx_mask) {
|
|
case 1:
|
|
break;
|
|
case 2:
|
|
aif1 |= 0x10;
|
|
break;
|
|
case 4:
|
|
aif1 |= 0x20;
|
|
break;
|
|
case 8:
|
|
aif1 |= 0x30;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_write(codec, WM9081_AUDIO_INTERFACE_1, aif1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define WM9081_RATES SNDRV_PCM_RATE_8000_96000
|
|
|
|
#define WM9081_FORMATS \
|
|
(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static struct snd_soc_dai_ops wm9081_dai_ops = {
|
|
.hw_params = wm9081_hw_params,
|
|
.set_sysclk = wm9081_set_sysclk,
|
|
.set_fmt = wm9081_set_dai_fmt,
|
|
.digital_mute = wm9081_digital_mute,
|
|
.set_tdm_slot = wm9081_set_tdm_slot,
|
|
};
|
|
|
|
/* We report two channels because the CODEC processes a stereo signal, even
|
|
* though it is only capable of handling a mono output.
|
|
*/
|
|
struct snd_soc_dai wm9081_dai = {
|
|
.name = "WM9081",
|
|
.playback = {
|
|
.stream_name = "HiFi Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM9081_RATES,
|
|
.formats = WM9081_FORMATS,
|
|
},
|
|
.ops = &wm9081_dai_ops,
|
|
};
|
|
EXPORT_SYMBOL_GPL(wm9081_dai);
|
|
|
|
|
|
static struct snd_soc_codec *wm9081_codec;
|
|
|
|
static int wm9081_probe(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec;
|
|
struct wm9081_priv *wm9081;
|
|
int ret = 0;
|
|
|
|
if (wm9081_codec == NULL) {
|
|
dev_err(&pdev->dev, "Codec device not registered\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
socdev->card->codec = wm9081_codec;
|
|
codec = wm9081_codec;
|
|
wm9081 = codec->private_data;
|
|
|
|
/* register pcms */
|
|
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "failed to create pcms: %d\n", ret);
|
|
goto pcm_err;
|
|
}
|
|
|
|
snd_soc_add_controls(codec, wm9081_snd_controls,
|
|
ARRAY_SIZE(wm9081_snd_controls));
|
|
if (!wm9081->retune) {
|
|
dev_dbg(codec->dev,
|
|
"No ReTune Mobile data, using normal EQ\n");
|
|
snd_soc_add_controls(codec, wm9081_eq_controls,
|
|
ARRAY_SIZE(wm9081_eq_controls));
|
|
}
|
|
|
|
snd_soc_dapm_new_controls(codec, wm9081_dapm_widgets,
|
|
ARRAY_SIZE(wm9081_dapm_widgets));
|
|
snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
|
|
snd_soc_dapm_new_widgets(codec);
|
|
|
|
ret = snd_soc_init_card(socdev);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "failed to register card: %d\n", ret);
|
|
goto card_err;
|
|
}
|
|
|
|
return ret;
|
|
|
|
card_err:
|
|
snd_soc_free_pcms(socdev);
|
|
snd_soc_dapm_free(socdev);
|
|
pcm_err:
|
|
return ret;
|
|
}
|
|
|
|
static int wm9081_remove(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
|
|
snd_soc_free_pcms(socdev);
|
|
snd_soc_dapm_free(socdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int wm9081_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
|
|
wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm9081_resume(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
u16 *reg_cache = codec->reg_cache;
|
|
int i;
|
|
|
|
for (i = 0; i < codec->reg_cache_size; i++) {
|
|
if (i == WM9081_SOFTWARE_RESET)
|
|
continue;
|
|
|
|
snd_soc_write(codec, i, reg_cache[i]);
|
|
}
|
|
|
|
wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define wm9081_suspend NULL
|
|
#define wm9081_resume NULL
|
|
#endif
|
|
|
|
struct snd_soc_codec_device soc_codec_dev_wm9081 = {
|
|
.probe = wm9081_probe,
|
|
.remove = wm9081_remove,
|
|
.suspend = wm9081_suspend,
|
|
.resume = wm9081_resume,
|
|
};
|
|
EXPORT_SYMBOL_GPL(soc_codec_dev_wm9081);
|
|
|
|
static int wm9081_register(struct wm9081_priv *wm9081,
|
|
enum snd_soc_control_type control)
|
|
{
|
|
struct snd_soc_codec *codec = &wm9081->codec;
|
|
int ret;
|
|
u16 reg;
|
|
|
|
if (wm9081_codec) {
|
|
dev_err(codec->dev, "Another WM9081 is registered\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
mutex_init(&codec->mutex);
|
|
INIT_LIST_HEAD(&codec->dapm_widgets);
|
|
INIT_LIST_HEAD(&codec->dapm_paths);
|
|
|
|
codec->private_data = wm9081;
|
|
codec->name = "WM9081";
|
|
codec->owner = THIS_MODULE;
|
|
codec->dai = &wm9081_dai;
|
|
codec->num_dai = 1;
|
|
codec->reg_cache_size = ARRAY_SIZE(wm9081->reg_cache);
|
|
codec->reg_cache = &wm9081->reg_cache;
|
|
codec->bias_level = SND_SOC_BIAS_OFF;
|
|
codec->set_bias_level = wm9081_set_bias_level;
|
|
codec->volatile_register = wm9081_volatile_register;
|
|
|
|
memcpy(codec->reg_cache, wm9081_reg_defaults,
|
|
sizeof(wm9081_reg_defaults));
|
|
|
|
ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
reg = snd_soc_read(codec, WM9081_SOFTWARE_RESET);
|
|
if (reg != 0x9081) {
|
|
dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = wm9081_reset(codec);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "Failed to issue reset\n");
|
|
return ret;
|
|
}
|
|
|
|
wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
/* Enable zero cross by default */
|
|
reg = snd_soc_read(codec, WM9081_ANALOGUE_LINEOUT);
|
|
snd_soc_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
|
|
reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
|
|
snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
|
|
reg | WM9081_SPKPGAZC);
|
|
|
|
wm9081_dai.dev = codec->dev;
|
|
|
|
wm9081_codec = codec;
|
|
|
|
ret = snd_soc_register_codec(codec);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = snd_soc_register_dai(&wm9081_dai);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
|
|
snd_soc_unregister_codec(codec);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
kfree(wm9081);
|
|
return ret;
|
|
}
|
|
|
|
static void wm9081_unregister(struct wm9081_priv *wm9081)
|
|
{
|
|
wm9081_set_bias_level(&wm9081->codec, SND_SOC_BIAS_OFF);
|
|
snd_soc_unregister_dai(&wm9081_dai);
|
|
snd_soc_unregister_codec(&wm9081->codec);
|
|
kfree(wm9081);
|
|
wm9081_codec = NULL;
|
|
}
|
|
|
|
static __devinit int wm9081_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wm9081_priv *wm9081;
|
|
struct snd_soc_codec *codec;
|
|
|
|
wm9081 = kzalloc(sizeof(struct wm9081_priv), GFP_KERNEL);
|
|
if (wm9081 == NULL)
|
|
return -ENOMEM;
|
|
|
|
codec = &wm9081->codec;
|
|
codec->hw_write = (hw_write_t)i2c_master_send;
|
|
wm9081->retune = i2c->dev.platform_data;
|
|
|
|
i2c_set_clientdata(i2c, wm9081);
|
|
codec->control_data = i2c;
|
|
|
|
codec->dev = &i2c->dev;
|
|
|
|
return wm9081_register(wm9081, SND_SOC_I2C);
|
|
}
|
|
|
|
static __devexit int wm9081_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct wm9081_priv *wm9081 = i2c_get_clientdata(client);
|
|
wm9081_unregister(wm9081);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int wm9081_i2c_suspend(struct i2c_client *client, pm_message_t msg)
|
|
{
|
|
return snd_soc_suspend_device(&client->dev);
|
|
}
|
|
|
|
static int wm9081_i2c_resume(struct i2c_client *client)
|
|
{
|
|
return snd_soc_resume_device(&client->dev);
|
|
}
|
|
#else
|
|
#define wm9081_i2c_suspend NULL
|
|
#define wm9081_i2c_resume NULL
|
|
#endif
|
|
|
|
static const struct i2c_device_id wm9081_i2c_id[] = {
|
|
{ "wm9081", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id);
|
|
|
|
static struct i2c_driver wm9081_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm9081",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = wm9081_i2c_probe,
|
|
.remove = __devexit_p(wm9081_i2c_remove),
|
|
.suspend = wm9081_i2c_suspend,
|
|
.resume = wm9081_i2c_resume,
|
|
.id_table = wm9081_i2c_id,
|
|
};
|
|
|
|
static int __init wm9081_modinit(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_add_driver(&wm9081_i2c_driver);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "Failed to register WM9081 I2C driver: %d\n",
|
|
ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
module_init(wm9081_modinit);
|
|
|
|
static void __exit wm9081_exit(void)
|
|
{
|
|
i2c_del_driver(&wm9081_i2c_driver);
|
|
}
|
|
module_exit(wm9081_exit);
|
|
|
|
|
|
MODULE_DESCRIPTION("ASoC WM9081 driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_LICENSE("GPL");
|