mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 19:25:05 +07:00
75f7f3ec60
Starting from ILK, mmio flips also cause a flip done interrupt to be signalled. This means if we first do a set_base and follow it immediately with the CS flip, we might mistake the flip done interrupt caused by the set_base as the flip done interrupt caused by the CS flip. The hardware has a flip counter which increments every time a mmio or CS flip is issued. It basically counts the number of DSPSURF register writes. This means we can sample the counter before we put the CS flip into the ring, and then when we get a flip done interrupt we can check whether the CS flip has actually performed the surface address update, or if the interrupt was caused by a previous but yet unfinished mmio flip. Even with the flip counter we still have a race condition of the CS flip base address update happens after the mmio flip done interrupt was raised but not yet processed by the driver. When the interrupt is eventually processed, the flip counter will already indicate that the CS flip has been executed, but it would not actually complete until the next start of vblank. We can use the DSPSURFLIVE register to check whether the hardware is actually scanning out of the buffer we expect, or if we managed hit this race window. This covers all the cases where the CS flip actually changes the base address. If the base address remains unchanged, we might still complete the CS flip before it has actually completed. But since the address didn't change anyway, the premature flip completion can't result in userspace overwriting data that's still being scanned out. CTG already has the flip counter and DSPSURFLIVE registers, and although the flip done interrupt is still limited to CS flips alone, the code now also checks the flip counter on CTG as well. v2: s/dspsurf/gtt_offset/ (Chris) Testcase: igt/kms_mmio_vs_cs_flip/setcrtc_vs_cs_flip Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73027 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> [danvet: Add g4x_ prefix to flip_count_after_eq.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
993 lines
33 KiB
C
993 lines
33 KiB
C
/*
|
|
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
|
|
* Copyright (c) 2007-2008 Intel Corporation
|
|
* Jesse Barnes <jesse.barnes@intel.com>
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*/
|
|
#ifndef __INTEL_DRV_H__
|
|
#define __INTEL_DRV_H__
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/hdmi.h>
|
|
#include <drm/i915_drm.h>
|
|
#include "i915_drv.h"
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_fb_helper.h>
|
|
#include <drm/drm_dp_helper.h>
|
|
|
|
/**
|
|
* _wait_for - magic (register) wait macro
|
|
*
|
|
* Does the right thing for modeset paths when run under kdgb or similar atomic
|
|
* contexts. Note that it's important that we check the condition again after
|
|
* having timed out, since the timeout could be due to preemption or similar and
|
|
* we've never had a chance to check the condition before the timeout.
|
|
*/
|
|
#define _wait_for(COND, MS, W) ({ \
|
|
unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \
|
|
int ret__ = 0; \
|
|
while (!(COND)) { \
|
|
if (time_after(jiffies, timeout__)) { \
|
|
if (!(COND)) \
|
|
ret__ = -ETIMEDOUT; \
|
|
break; \
|
|
} \
|
|
if (W && drm_can_sleep()) { \
|
|
msleep(W); \
|
|
} else { \
|
|
cpu_relax(); \
|
|
} \
|
|
} \
|
|
ret__; \
|
|
})
|
|
|
|
#define wait_for(COND, MS) _wait_for(COND, MS, 1)
|
|
#define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0)
|
|
#define wait_for_atomic_us(COND, US) _wait_for((COND), \
|
|
DIV_ROUND_UP((US), 1000), 0)
|
|
|
|
#define KHz(x) (1000 * (x))
|
|
#define MHz(x) KHz(1000 * (x))
|
|
|
|
/*
|
|
* Display related stuff
|
|
*/
|
|
|
|
/* store information about an Ixxx DVO */
|
|
/* The i830->i865 use multiple DVOs with multiple i2cs */
|
|
/* the i915, i945 have a single sDVO i2c bus - which is different */
|
|
#define MAX_OUTPUTS 6
|
|
/* maximum connectors per crtcs in the mode set */
|
|
|
|
/* Maximum cursor sizes */
|
|
#define GEN2_CURSOR_WIDTH 64
|
|
#define GEN2_CURSOR_HEIGHT 64
|
|
#define MAX_CURSOR_WIDTH 256
|
|
#define MAX_CURSOR_HEIGHT 256
|
|
|
|
#define INTEL_I2C_BUS_DVO 1
|
|
#define INTEL_I2C_BUS_SDVO 2
|
|
|
|
/* these are outputs from the chip - integrated only
|
|
external chips are via DVO or SDVO output */
|
|
#define INTEL_OUTPUT_UNUSED 0
|
|
#define INTEL_OUTPUT_ANALOG 1
|
|
#define INTEL_OUTPUT_DVO 2
|
|
#define INTEL_OUTPUT_SDVO 3
|
|
#define INTEL_OUTPUT_LVDS 4
|
|
#define INTEL_OUTPUT_TVOUT 5
|
|
#define INTEL_OUTPUT_HDMI 6
|
|
#define INTEL_OUTPUT_DISPLAYPORT 7
|
|
#define INTEL_OUTPUT_EDP 8
|
|
#define INTEL_OUTPUT_DSI 9
|
|
#define INTEL_OUTPUT_UNKNOWN 10
|
|
|
|
#define INTEL_DVO_CHIP_NONE 0
|
|
#define INTEL_DVO_CHIP_LVDS 1
|
|
#define INTEL_DVO_CHIP_TMDS 2
|
|
#define INTEL_DVO_CHIP_TVOUT 4
|
|
|
|
#define INTEL_DSI_VIDEO_MODE 0
|
|
#define INTEL_DSI_COMMAND_MODE 1
|
|
|
|
struct intel_framebuffer {
|
|
struct drm_framebuffer base;
|
|
struct drm_i915_gem_object *obj;
|
|
};
|
|
|
|
struct intel_fbdev {
|
|
struct drm_fb_helper helper;
|
|
struct intel_framebuffer *fb;
|
|
struct list_head fbdev_list;
|
|
struct drm_display_mode *our_mode;
|
|
int preferred_bpp;
|
|
};
|
|
|
|
struct intel_encoder {
|
|
struct drm_encoder base;
|
|
/*
|
|
* The new crtc this encoder will be driven from. Only differs from
|
|
* base->crtc while a modeset is in progress.
|
|
*/
|
|
struct intel_crtc *new_crtc;
|
|
|
|
int type;
|
|
unsigned int cloneable;
|
|
bool connectors_active;
|
|
void (*hot_plug)(struct intel_encoder *);
|
|
bool (*compute_config)(struct intel_encoder *,
|
|
struct intel_crtc_config *);
|
|
void (*pre_pll_enable)(struct intel_encoder *);
|
|
void (*pre_enable)(struct intel_encoder *);
|
|
void (*enable)(struct intel_encoder *);
|
|
void (*mode_set)(struct intel_encoder *intel_encoder);
|
|
void (*disable)(struct intel_encoder *);
|
|
void (*post_disable)(struct intel_encoder *);
|
|
/* Read out the current hw state of this connector, returning true if
|
|
* the encoder is active. If the encoder is enabled it also set the pipe
|
|
* it is connected to in the pipe parameter. */
|
|
bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
|
|
/* Reconstructs the equivalent mode flags for the current hardware
|
|
* state. This must be called _after_ display->get_pipe_config has
|
|
* pre-filled the pipe config. Note that intel_encoder->base.crtc must
|
|
* be set correctly before calling this function. */
|
|
void (*get_config)(struct intel_encoder *,
|
|
struct intel_crtc_config *pipe_config);
|
|
int crtc_mask;
|
|
enum hpd_pin hpd_pin;
|
|
};
|
|
|
|
struct intel_panel {
|
|
struct drm_display_mode *fixed_mode;
|
|
struct drm_display_mode *downclock_mode;
|
|
int fitting_mode;
|
|
|
|
/* backlight */
|
|
struct {
|
|
bool present;
|
|
u32 level;
|
|
u32 max;
|
|
bool enabled;
|
|
bool combination_mode; /* gen 2/4 only */
|
|
bool active_low_pwm;
|
|
struct backlight_device *device;
|
|
} backlight;
|
|
};
|
|
|
|
struct intel_connector {
|
|
struct drm_connector base;
|
|
/*
|
|
* The fixed encoder this connector is connected to.
|
|
*/
|
|
struct intel_encoder *encoder;
|
|
|
|
/*
|
|
* The new encoder this connector will be driven. Only differs from
|
|
* encoder while a modeset is in progress.
|
|
*/
|
|
struct intel_encoder *new_encoder;
|
|
|
|
/* Reads out the current hw, returning true if the connector is enabled
|
|
* and active (i.e. dpms ON state). */
|
|
bool (*get_hw_state)(struct intel_connector *);
|
|
|
|
/*
|
|
* Removes all interfaces through which the connector is accessible
|
|
* - like sysfs, debugfs entries -, so that no new operations can be
|
|
* started on the connector. Also makes sure all currently pending
|
|
* operations finish before returing.
|
|
*/
|
|
void (*unregister)(struct intel_connector *);
|
|
|
|
/* Panel info for eDP and LVDS */
|
|
struct intel_panel panel;
|
|
|
|
/* Cached EDID for eDP and LVDS. May hold ERR_PTR for invalid EDID. */
|
|
struct edid *edid;
|
|
|
|
/* since POLL and HPD connectors may use the same HPD line keep the native
|
|
state of connector->polled in case hotplug storm detection changes it */
|
|
u8 polled;
|
|
};
|
|
|
|
typedef struct dpll {
|
|
/* given values */
|
|
int n;
|
|
int m1, m2;
|
|
int p1, p2;
|
|
/* derived values */
|
|
int dot;
|
|
int vco;
|
|
int m;
|
|
int p;
|
|
} intel_clock_t;
|
|
|
|
struct intel_plane_config {
|
|
bool tiled;
|
|
int size;
|
|
u32 base;
|
|
};
|
|
|
|
struct intel_crtc_config {
|
|
/**
|
|
* quirks - bitfield with hw state readout quirks
|
|
*
|
|
* For various reasons the hw state readout code might not be able to
|
|
* completely faithfully read out the current state. These cases are
|
|
* tracked with quirk flags so that fastboot and state checker can act
|
|
* accordingly.
|
|
*/
|
|
#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */
|
|
#define PIPE_CONFIG_QUIRK_INHERITED_MODE (1<<1) /* mode inherited from firmware */
|
|
unsigned long quirks;
|
|
|
|
/* User requested mode, only valid as a starting point to
|
|
* compute adjusted_mode, except in the case of (S)DVO where
|
|
* it's also for the output timings of the (S)DVO chip.
|
|
* adjusted_mode will then correspond to the S(DVO) chip's
|
|
* preferred input timings. */
|
|
struct drm_display_mode requested_mode;
|
|
/* Actual pipe timings ie. what we program into the pipe timing
|
|
* registers. adjusted_mode.crtc_clock is the pipe pixel clock. */
|
|
struct drm_display_mode adjusted_mode;
|
|
|
|
/* Pipe source size (ie. panel fitter input size)
|
|
* All planes will be positioned inside this space,
|
|
* and get clipped at the edges. */
|
|
int pipe_src_w, pipe_src_h;
|
|
|
|
/* Whether to set up the PCH/FDI. Note that we never allow sharing
|
|
* between pch encoders and cpu encoders. */
|
|
bool has_pch_encoder;
|
|
|
|
/* CPU Transcoder for the pipe. Currently this can only differ from the
|
|
* pipe on Haswell (where we have a special eDP transcoder). */
|
|
enum transcoder cpu_transcoder;
|
|
|
|
/*
|
|
* Use reduced/limited/broadcast rbg range, compressing from the full
|
|
* range fed into the crtcs.
|
|
*/
|
|
bool limited_color_range;
|
|
|
|
/* DP has a bunch of special case unfortunately, so mark the pipe
|
|
* accordingly. */
|
|
bool has_dp_encoder;
|
|
|
|
/* Whether we should send NULL infoframes. Required for audio. */
|
|
bool has_hdmi_sink;
|
|
|
|
/* Audio enabled on this pipe. Only valid if either has_hdmi_sink or
|
|
* has_dp_encoder is set. */
|
|
bool has_audio;
|
|
|
|
/*
|
|
* Enable dithering, used when the selected pipe bpp doesn't match the
|
|
* plane bpp.
|
|
*/
|
|
bool dither;
|
|
|
|
/* Controls for the clock computation, to override various stages. */
|
|
bool clock_set;
|
|
|
|
/* SDVO TV has a bunch of special case. To make multifunction encoders
|
|
* work correctly, we need to track this at runtime.*/
|
|
bool sdvo_tv_clock;
|
|
|
|
/*
|
|
* crtc bandwidth limit, don't increase pipe bpp or clock if not really
|
|
* required. This is set in the 2nd loop of calling encoder's
|
|
* ->compute_config if the first pick doesn't work out.
|
|
*/
|
|
bool bw_constrained;
|
|
|
|
/* Settings for the intel dpll used on pretty much everything but
|
|
* haswell. */
|
|
struct dpll dpll;
|
|
|
|
/* Selected dpll when shared or DPLL_ID_PRIVATE. */
|
|
enum intel_dpll_id shared_dpll;
|
|
|
|
/* Actual register state of the dpll, for shared dpll cross-checking. */
|
|
struct intel_dpll_hw_state dpll_hw_state;
|
|
|
|
int pipe_bpp;
|
|
struct intel_link_m_n dp_m_n;
|
|
|
|
/* m2_n2 for eDP downclock */
|
|
struct intel_link_m_n dp_m2_n2;
|
|
|
|
/*
|
|
* Frequence the dpll for the port should run at. Differs from the
|
|
* adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also
|
|
* already multiplied by pixel_multiplier.
|
|
*/
|
|
int port_clock;
|
|
|
|
/* Used by SDVO (and if we ever fix it, HDMI). */
|
|
unsigned pixel_multiplier;
|
|
|
|
/* Panel fitter controls for gen2-gen4 + VLV */
|
|
struct {
|
|
u32 control;
|
|
u32 pgm_ratios;
|
|
u32 lvds_border_bits;
|
|
} gmch_pfit;
|
|
|
|
/* Panel fitter placement and size for Ironlake+ */
|
|
struct {
|
|
u32 pos;
|
|
u32 size;
|
|
bool enabled;
|
|
} pch_pfit;
|
|
|
|
/* FDI configuration, only valid if has_pch_encoder is set. */
|
|
int fdi_lanes;
|
|
struct intel_link_m_n fdi_m_n;
|
|
|
|
bool ips_enabled;
|
|
|
|
bool double_wide;
|
|
};
|
|
|
|
struct intel_pipe_wm {
|
|
struct intel_wm_level wm[5];
|
|
uint32_t linetime;
|
|
bool fbc_wm_enabled;
|
|
bool pipe_enabled;
|
|
bool sprites_enabled;
|
|
bool sprites_scaled;
|
|
};
|
|
|
|
struct intel_crtc {
|
|
struct drm_crtc base;
|
|
enum pipe pipe;
|
|
enum plane plane;
|
|
u8 lut_r[256], lut_g[256], lut_b[256];
|
|
/*
|
|
* Whether the crtc and the connected output pipeline is active. Implies
|
|
* that crtc->enabled is set, i.e. the current mode configuration has
|
|
* some outputs connected to this crtc.
|
|
*/
|
|
bool active;
|
|
unsigned long enabled_power_domains;
|
|
bool primary_enabled; /* is the primary plane (partially) visible? */
|
|
bool lowfreq_avail;
|
|
struct intel_overlay *overlay;
|
|
struct intel_unpin_work *unpin_work;
|
|
|
|
atomic_t unpin_work_count;
|
|
|
|
/* Display surface base address adjustement for pageflips. Note that on
|
|
* gen4+ this only adjusts up to a tile, offsets within a tile are
|
|
* handled in the hw itself (with the TILEOFF register). */
|
|
unsigned long dspaddr_offset;
|
|
|
|
struct drm_i915_gem_object *cursor_bo;
|
|
uint32_t cursor_addr;
|
|
int16_t cursor_x, cursor_y;
|
|
int16_t cursor_width, cursor_height;
|
|
bool cursor_visible;
|
|
|
|
struct intel_plane_config plane_config;
|
|
struct intel_crtc_config config;
|
|
struct intel_crtc_config *new_config;
|
|
bool new_enabled;
|
|
|
|
uint32_t ddi_pll_sel;
|
|
|
|
/* reset counter value when the last flip was submitted */
|
|
unsigned int reset_counter;
|
|
|
|
/* Access to these should be protected by dev_priv->irq_lock. */
|
|
bool cpu_fifo_underrun_disabled;
|
|
bool pch_fifo_underrun_disabled;
|
|
|
|
/* per-pipe watermark state */
|
|
struct {
|
|
/* watermarks currently being used */
|
|
struct intel_pipe_wm active;
|
|
} wm;
|
|
|
|
wait_queue_head_t vbl_wait;
|
|
};
|
|
|
|
struct intel_plane_wm_parameters {
|
|
uint32_t horiz_pixels;
|
|
uint8_t bytes_per_pixel;
|
|
bool enabled;
|
|
bool scaled;
|
|
};
|
|
|
|
struct intel_plane {
|
|
struct drm_plane base;
|
|
int plane;
|
|
enum pipe pipe;
|
|
struct drm_i915_gem_object *obj;
|
|
bool can_scale;
|
|
int max_downscale;
|
|
u32 lut_r[1024], lut_g[1024], lut_b[1024];
|
|
int crtc_x, crtc_y;
|
|
unsigned int crtc_w, crtc_h;
|
|
uint32_t src_x, src_y;
|
|
uint32_t src_w, src_h;
|
|
|
|
/* Since we need to change the watermarks before/after
|
|
* enabling/disabling the planes, we need to store the parameters here
|
|
* as the other pieces of the struct may not reflect the values we want
|
|
* for the watermark calculations. Currently only Haswell uses this.
|
|
*/
|
|
struct intel_plane_wm_parameters wm;
|
|
|
|
void (*update_plane)(struct drm_plane *plane,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj,
|
|
int crtc_x, int crtc_y,
|
|
unsigned int crtc_w, unsigned int crtc_h,
|
|
uint32_t x, uint32_t y,
|
|
uint32_t src_w, uint32_t src_h);
|
|
void (*disable_plane)(struct drm_plane *plane,
|
|
struct drm_crtc *crtc);
|
|
int (*update_colorkey)(struct drm_plane *plane,
|
|
struct drm_intel_sprite_colorkey *key);
|
|
void (*get_colorkey)(struct drm_plane *plane,
|
|
struct drm_intel_sprite_colorkey *key);
|
|
};
|
|
|
|
struct intel_watermark_params {
|
|
unsigned long fifo_size;
|
|
unsigned long max_wm;
|
|
unsigned long default_wm;
|
|
unsigned long guard_size;
|
|
unsigned long cacheline_size;
|
|
};
|
|
|
|
struct cxsr_latency {
|
|
int is_desktop;
|
|
int is_ddr3;
|
|
unsigned long fsb_freq;
|
|
unsigned long mem_freq;
|
|
unsigned long display_sr;
|
|
unsigned long display_hpll_disable;
|
|
unsigned long cursor_sr;
|
|
unsigned long cursor_hpll_disable;
|
|
};
|
|
|
|
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
|
|
#define to_intel_connector(x) container_of(x, struct intel_connector, base)
|
|
#define to_intel_encoder(x) container_of(x, struct intel_encoder, base)
|
|
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
|
|
#define to_intel_plane(x) container_of(x, struct intel_plane, base)
|
|
|
|
struct intel_hdmi {
|
|
u32 hdmi_reg;
|
|
int ddc_bus;
|
|
uint32_t color_range;
|
|
bool color_range_auto;
|
|
bool has_hdmi_sink;
|
|
bool has_audio;
|
|
enum hdmi_force_audio force_audio;
|
|
bool rgb_quant_range_selectable;
|
|
void (*write_infoframe)(struct drm_encoder *encoder,
|
|
enum hdmi_infoframe_type type,
|
|
const void *frame, ssize_t len);
|
|
void (*set_infoframes)(struct drm_encoder *encoder,
|
|
bool enable,
|
|
struct drm_display_mode *adjusted_mode);
|
|
};
|
|
|
|
#define DP_MAX_DOWNSTREAM_PORTS 0x10
|
|
|
|
/**
|
|
* HIGH_RR is the highest eDP panel refresh rate read from EDID
|
|
* LOW_RR is the lowest eDP panel refresh rate found from EDID
|
|
* parsing for same resolution.
|
|
*/
|
|
enum edp_drrs_refresh_rate_type {
|
|
DRRS_HIGH_RR,
|
|
DRRS_LOW_RR,
|
|
DRRS_MAX_RR, /* RR count */
|
|
};
|
|
|
|
struct intel_dp {
|
|
uint32_t output_reg;
|
|
uint32_t aux_ch_ctl_reg;
|
|
uint32_t DP;
|
|
bool has_audio;
|
|
enum hdmi_force_audio force_audio;
|
|
uint32_t color_range;
|
|
bool color_range_auto;
|
|
uint8_t link_bw;
|
|
uint8_t lane_count;
|
|
uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
|
|
uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
|
|
uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
|
|
struct drm_dp_aux aux;
|
|
uint8_t train_set[4];
|
|
int panel_power_up_delay;
|
|
int panel_power_down_delay;
|
|
int panel_power_cycle_delay;
|
|
int backlight_on_delay;
|
|
int backlight_off_delay;
|
|
struct delayed_work panel_vdd_work;
|
|
bool want_panel_vdd;
|
|
unsigned long last_power_cycle;
|
|
unsigned long last_power_on;
|
|
unsigned long last_backlight_off;
|
|
bool psr_setup_done;
|
|
bool use_tps3;
|
|
struct intel_connector *attached_connector;
|
|
|
|
uint32_t (*get_aux_clock_divider)(struct intel_dp *dp, int index);
|
|
/*
|
|
* This function returns the value we have to program the AUX_CTL
|
|
* register with to kick off an AUX transaction.
|
|
*/
|
|
uint32_t (*get_aux_send_ctl)(struct intel_dp *dp,
|
|
bool has_aux_irq,
|
|
int send_bytes,
|
|
uint32_t aux_clock_divider);
|
|
struct {
|
|
enum drrs_support_type type;
|
|
enum edp_drrs_refresh_rate_type refresh_rate_type;
|
|
struct mutex mutex;
|
|
} drrs_state;
|
|
|
|
};
|
|
|
|
struct intel_digital_port {
|
|
struct intel_encoder base;
|
|
enum port port;
|
|
u32 saved_port_bits;
|
|
struct intel_dp dp;
|
|
struct intel_hdmi hdmi;
|
|
};
|
|
|
|
static inline int
|
|
vlv_dport_to_channel(struct intel_digital_port *dport)
|
|
{
|
|
switch (dport->port) {
|
|
case PORT_B:
|
|
case PORT_D:
|
|
return DPIO_CH0;
|
|
case PORT_C:
|
|
return DPIO_CH1;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static inline int
|
|
vlv_pipe_to_channel(enum pipe pipe)
|
|
{
|
|
switch (pipe) {
|
|
case PIPE_A:
|
|
case PIPE_C:
|
|
return DPIO_CH0;
|
|
case PIPE_B:
|
|
return DPIO_CH1;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static inline struct drm_crtc *
|
|
intel_get_crtc_for_pipe(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
return dev_priv->pipe_to_crtc_mapping[pipe];
|
|
}
|
|
|
|
static inline struct drm_crtc *
|
|
intel_get_crtc_for_plane(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
return dev_priv->plane_to_crtc_mapping[plane];
|
|
}
|
|
|
|
struct intel_unpin_work {
|
|
struct work_struct work;
|
|
struct drm_crtc *crtc;
|
|
struct drm_i915_gem_object *old_fb_obj;
|
|
struct drm_i915_gem_object *pending_flip_obj;
|
|
struct drm_pending_vblank_event *event;
|
|
atomic_t pending;
|
|
#define INTEL_FLIP_INACTIVE 0
|
|
#define INTEL_FLIP_PENDING 1
|
|
#define INTEL_FLIP_COMPLETE 2
|
|
u32 flip_count;
|
|
u32 gtt_offset;
|
|
bool enable_stall_check;
|
|
};
|
|
|
|
struct intel_set_config {
|
|
struct drm_encoder **save_connector_encoders;
|
|
struct drm_crtc **save_encoder_crtcs;
|
|
bool *save_crtc_enabled;
|
|
|
|
bool fb_changed;
|
|
bool mode_changed;
|
|
};
|
|
|
|
struct intel_load_detect_pipe {
|
|
struct drm_framebuffer *release_fb;
|
|
bool load_detect_temp;
|
|
int dpms_mode;
|
|
};
|
|
|
|
static inline struct intel_encoder *
|
|
intel_attached_encoder(struct drm_connector *connector)
|
|
{
|
|
return to_intel_connector(connector)->encoder;
|
|
}
|
|
|
|
static inline struct intel_digital_port *
|
|
enc_to_dig_port(struct drm_encoder *encoder)
|
|
{
|
|
return container_of(encoder, struct intel_digital_port, base.base);
|
|
}
|
|
|
|
static inline struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)
|
|
{
|
|
return &enc_to_dig_port(encoder)->dp;
|
|
}
|
|
|
|
static inline struct intel_digital_port *
|
|
dp_to_dig_port(struct intel_dp *intel_dp)
|
|
{
|
|
return container_of(intel_dp, struct intel_digital_port, dp);
|
|
}
|
|
|
|
static inline struct intel_digital_port *
|
|
hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
|
|
{
|
|
return container_of(intel_hdmi, struct intel_digital_port, hdmi);
|
|
}
|
|
|
|
|
|
/* i915_irq.c */
|
|
bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
|
|
enum pipe pipe, bool enable);
|
|
bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
|
|
enum pipe pipe, bool enable);
|
|
bool intel_set_pch_fifo_underrun_reporting(struct drm_device *dev,
|
|
enum transcoder pch_transcoder,
|
|
bool enable);
|
|
void ilk_enable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask);
|
|
void ilk_disable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask);
|
|
void snb_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
|
|
void snb_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
|
|
void bdw_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
|
|
void bdw_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
|
|
void intel_runtime_pm_disable_interrupts(struct drm_device *dev);
|
|
void intel_runtime_pm_restore_interrupts(struct drm_device *dev);
|
|
int intel_get_crtc_scanline(struct intel_crtc *crtc);
|
|
|
|
|
|
/* intel_crt.c */
|
|
void intel_crt_init(struct drm_device *dev);
|
|
|
|
|
|
/* intel_ddi.c */
|
|
void intel_prepare_ddi(struct drm_device *dev);
|
|
void hsw_fdi_link_train(struct drm_crtc *crtc);
|
|
void intel_ddi_init(struct drm_device *dev, enum port port);
|
|
enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
|
|
bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
|
|
int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv);
|
|
void intel_ddi_pll_init(struct drm_device *dev);
|
|
void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc);
|
|
void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
|
|
enum transcoder cpu_transcoder);
|
|
void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc);
|
|
void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc);
|
|
void intel_ddi_setup_hw_pll_state(struct drm_device *dev);
|
|
bool intel_ddi_pll_select(struct intel_crtc *crtc);
|
|
void intel_ddi_pll_enable(struct intel_crtc *crtc);
|
|
void intel_ddi_put_crtc_pll(struct drm_crtc *crtc);
|
|
void intel_ddi_set_pipe_settings(struct drm_crtc *crtc);
|
|
void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder);
|
|
bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
|
|
void intel_ddi_fdi_disable(struct drm_crtc *crtc);
|
|
void intel_ddi_get_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_config *pipe_config);
|
|
|
|
|
|
/* intel_display.c */
|
|
const char *intel_output_name(int output);
|
|
bool intel_has_pending_fb_unpin(struct drm_device *dev);
|
|
int intel_pch_rawclk(struct drm_device *dev);
|
|
int valleyview_cur_cdclk(struct drm_i915_private *dev_priv);
|
|
void intel_mark_busy(struct drm_device *dev);
|
|
void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
|
|
struct intel_ring_buffer *ring);
|
|
void intel_mark_idle(struct drm_device *dev);
|
|
void intel_crtc_restore_mode(struct drm_crtc *crtc);
|
|
void intel_crtc_update_dpms(struct drm_crtc *crtc);
|
|
void intel_encoder_destroy(struct drm_encoder *encoder);
|
|
void intel_connector_dpms(struct drm_connector *, int mode);
|
|
bool intel_connector_get_hw_state(struct intel_connector *connector);
|
|
void intel_modeset_check_state(struct drm_device *dev);
|
|
bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
|
|
struct intel_digital_port *port);
|
|
void intel_connector_attach_encoder(struct intel_connector *connector,
|
|
struct intel_encoder *encoder);
|
|
struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
|
|
struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
|
|
struct drm_crtc *crtc);
|
|
enum pipe intel_get_pipe_from_connector(struct intel_connector *connector);
|
|
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe);
|
|
void intel_wait_for_vblank(struct drm_device *dev, int pipe);
|
|
void intel_wait_for_pipe_off(struct drm_device *dev, int pipe);
|
|
int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp);
|
|
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
|
|
struct intel_digital_port *dport);
|
|
bool intel_get_load_detect_pipe(struct drm_connector *connector,
|
|
struct drm_display_mode *mode,
|
|
struct intel_load_detect_pipe *old);
|
|
void intel_release_load_detect_pipe(struct drm_connector *connector,
|
|
struct intel_load_detect_pipe *old);
|
|
int intel_pin_and_fence_fb_obj(struct drm_device *dev,
|
|
struct drm_i915_gem_object *obj,
|
|
struct intel_ring_buffer *pipelined);
|
|
void intel_unpin_fb_obj(struct drm_i915_gem_object *obj);
|
|
struct drm_framebuffer *
|
|
__intel_framebuffer_create(struct drm_device *dev,
|
|
struct drm_mode_fb_cmd2 *mode_cmd,
|
|
struct drm_i915_gem_object *obj);
|
|
void intel_prepare_page_flip(struct drm_device *dev, int plane);
|
|
void intel_finish_page_flip(struct drm_device *dev, int pipe);
|
|
void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
|
|
struct intel_shared_dpll *intel_crtc_to_shared_dpll(struct intel_crtc *crtc);
|
|
void assert_shared_dpll(struct drm_i915_private *dev_priv,
|
|
struct intel_shared_dpll *pll,
|
|
bool state);
|
|
#define assert_shared_dpll_enabled(d, p) assert_shared_dpll(d, p, true)
|
|
#define assert_shared_dpll_disabled(d, p) assert_shared_dpll(d, p, false)
|
|
void assert_pll(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state);
|
|
#define assert_pll_enabled(d, p) assert_pll(d, p, true)
|
|
#define assert_pll_disabled(d, p) assert_pll(d, p, false)
|
|
void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state);
|
|
#define assert_fdi_rx_pll_enabled(d, p) assert_fdi_rx_pll(d, p, true)
|
|
#define assert_fdi_rx_pll_disabled(d, p) assert_fdi_rx_pll(d, p, false)
|
|
void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state);
|
|
#define assert_pipe_enabled(d, p) assert_pipe(d, p, true)
|
|
#define assert_pipe_disabled(d, p) assert_pipe(d, p, false)
|
|
void intel_write_eld(struct drm_encoder *encoder,
|
|
struct drm_display_mode *mode);
|
|
unsigned long intel_gen4_compute_page_offset(int *x, int *y,
|
|
unsigned int tiling_mode,
|
|
unsigned int bpp,
|
|
unsigned int pitch);
|
|
void intel_display_handle_reset(struct drm_device *dev);
|
|
void hsw_enable_pc8(struct drm_i915_private *dev_priv);
|
|
void hsw_disable_pc8(struct drm_i915_private *dev_priv);
|
|
void intel_dp_get_m_n(struct intel_crtc *crtc,
|
|
struct intel_crtc_config *pipe_config);
|
|
int intel_dotclock_calculate(int link_freq, const struct intel_link_m_n *m_n);
|
|
void
|
|
ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config,
|
|
int dotclock);
|
|
bool intel_crtc_active(struct drm_crtc *crtc);
|
|
void hsw_enable_ips(struct intel_crtc *crtc);
|
|
void hsw_disable_ips(struct intel_crtc *crtc);
|
|
void intel_display_set_init_power(struct drm_i915_private *dev, bool enable);
|
|
enum intel_display_power_domain
|
|
intel_display_port_power_domain(struct intel_encoder *intel_encoder);
|
|
int valleyview_get_vco(struct drm_i915_private *dev_priv);
|
|
void intel_mode_from_pipe_config(struct drm_display_mode *mode,
|
|
struct intel_crtc_config *pipe_config);
|
|
int intel_format_to_fourcc(int format);
|
|
|
|
/* intel_dp.c */
|
|
void intel_dp_init(struct drm_device *dev, int output_reg, enum port port);
|
|
bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
|
|
struct intel_connector *intel_connector);
|
|
void intel_dp_start_link_train(struct intel_dp *intel_dp);
|
|
void intel_dp_complete_link_train(struct intel_dp *intel_dp);
|
|
void intel_dp_stop_link_train(struct intel_dp *intel_dp);
|
|
void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
|
|
void intel_dp_encoder_destroy(struct drm_encoder *encoder);
|
|
void intel_dp_check_link_status(struct intel_dp *intel_dp);
|
|
int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc);
|
|
bool intel_dp_compute_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_config *pipe_config);
|
|
bool intel_dp_is_edp(struct drm_device *dev, enum port port);
|
|
void intel_edp_backlight_on(struct intel_dp *intel_dp);
|
|
void intel_edp_backlight_off(struct intel_dp *intel_dp);
|
|
void intel_edp_panel_vdd_on(struct intel_dp *intel_dp);
|
|
void intel_edp_panel_on(struct intel_dp *intel_dp);
|
|
void intel_edp_panel_off(struct intel_dp *intel_dp);
|
|
void intel_edp_psr_enable(struct intel_dp *intel_dp);
|
|
void intel_edp_psr_disable(struct intel_dp *intel_dp);
|
|
void intel_edp_psr_update(struct drm_device *dev);
|
|
void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate);
|
|
|
|
/* intel_dsi.c */
|
|
bool intel_dsi_init(struct drm_device *dev);
|
|
|
|
|
|
/* intel_dvo.c */
|
|
void intel_dvo_init(struct drm_device *dev);
|
|
|
|
|
|
/* legacy fbdev emulation in intel_fbdev.c */
|
|
#ifdef CONFIG_DRM_I915_FBDEV
|
|
extern int intel_fbdev_init(struct drm_device *dev);
|
|
extern void intel_fbdev_initial_config(struct drm_device *dev);
|
|
extern void intel_fbdev_fini(struct drm_device *dev);
|
|
extern void intel_fbdev_set_suspend(struct drm_device *dev, int state);
|
|
extern void intel_fbdev_output_poll_changed(struct drm_device *dev);
|
|
extern void intel_fbdev_restore_mode(struct drm_device *dev);
|
|
#else
|
|
static inline int intel_fbdev_init(struct drm_device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void intel_fbdev_initial_config(struct drm_device *dev)
|
|
{
|
|
}
|
|
|
|
static inline void intel_fbdev_fini(struct drm_device *dev)
|
|
{
|
|
}
|
|
|
|
static inline void intel_fbdev_set_suspend(struct drm_device *dev, int state)
|
|
{
|
|
}
|
|
|
|
static inline void intel_fbdev_restore_mode(struct drm_device *dev)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/* intel_hdmi.c */
|
|
void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port);
|
|
void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
|
|
struct intel_connector *intel_connector);
|
|
struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder);
|
|
bool intel_hdmi_compute_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_config *pipe_config);
|
|
|
|
|
|
/* intel_lvds.c */
|
|
void intel_lvds_init(struct drm_device *dev);
|
|
bool intel_is_dual_link_lvds(struct drm_device *dev);
|
|
|
|
|
|
/* intel_modes.c */
|
|
int intel_connector_update_modes(struct drm_connector *connector,
|
|
struct edid *edid);
|
|
int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);
|
|
void intel_attach_force_audio_property(struct drm_connector *connector);
|
|
void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
|
|
|
|
|
|
/* intel_overlay.c */
|
|
void intel_setup_overlay(struct drm_device *dev);
|
|
void intel_cleanup_overlay(struct drm_device *dev);
|
|
int intel_overlay_switch_off(struct intel_overlay *overlay);
|
|
int intel_overlay_put_image(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int intel_overlay_attrs(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
|
|
|
|
/* intel_panel.c */
|
|
int intel_panel_init(struct intel_panel *panel,
|
|
struct drm_display_mode *fixed_mode,
|
|
struct drm_display_mode *downclock_mode);
|
|
void intel_panel_fini(struct intel_panel *panel);
|
|
void intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
|
|
struct drm_display_mode *adjusted_mode);
|
|
void intel_pch_panel_fitting(struct intel_crtc *crtc,
|
|
struct intel_crtc_config *pipe_config,
|
|
int fitting_mode);
|
|
void intel_gmch_panel_fitting(struct intel_crtc *crtc,
|
|
struct intel_crtc_config *pipe_config,
|
|
int fitting_mode);
|
|
void intel_panel_set_backlight(struct intel_connector *connector, u32 level,
|
|
u32 max);
|
|
int intel_panel_setup_backlight(struct drm_connector *connector);
|
|
void intel_panel_enable_backlight(struct intel_connector *connector);
|
|
void intel_panel_disable_backlight(struct intel_connector *connector);
|
|
void intel_panel_destroy_backlight(struct drm_connector *connector);
|
|
void intel_panel_init_backlight_funcs(struct drm_device *dev);
|
|
enum drm_connector_status intel_panel_detect(struct drm_device *dev);
|
|
extern struct drm_display_mode *intel_find_panel_downclock(
|
|
struct drm_device *dev,
|
|
struct drm_display_mode *fixed_mode,
|
|
struct drm_connector *connector);
|
|
|
|
/* intel_pm.c */
|
|
void intel_init_clock_gating(struct drm_device *dev);
|
|
void intel_suspend_hw(struct drm_device *dev);
|
|
int ilk_wm_max_level(const struct drm_device *dev);
|
|
void intel_update_watermarks(struct drm_crtc *crtc);
|
|
void intel_update_sprite_watermarks(struct drm_plane *plane,
|
|
struct drm_crtc *crtc,
|
|
uint32_t sprite_width, int pixel_size,
|
|
bool enabled, bool scaled);
|
|
void intel_init_pm(struct drm_device *dev);
|
|
void intel_pm_setup(struct drm_device *dev);
|
|
bool intel_fbc_enabled(struct drm_device *dev);
|
|
void intel_update_fbc(struct drm_device *dev);
|
|
void intel_gpu_ips_init(struct drm_i915_private *dev_priv);
|
|
void intel_gpu_ips_teardown(void);
|
|
int intel_power_domains_init(struct drm_i915_private *);
|
|
void intel_power_domains_remove(struct drm_i915_private *);
|
|
bool intel_display_power_enabled(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain);
|
|
bool intel_display_power_enabled_sw(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain);
|
|
void intel_display_power_get(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain);
|
|
void intel_display_power_put(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain);
|
|
void intel_power_domains_init_hw(struct drm_i915_private *dev_priv);
|
|
void intel_init_gt_powersave(struct drm_device *dev);
|
|
void intel_cleanup_gt_powersave(struct drm_device *dev);
|
|
void intel_enable_gt_powersave(struct drm_device *dev);
|
|
void intel_disable_gt_powersave(struct drm_device *dev);
|
|
void intel_reset_gt_powersave(struct drm_device *dev);
|
|
void ironlake_teardown_rc6(struct drm_device *dev);
|
|
void gen6_update_ring_freq(struct drm_device *dev);
|
|
void gen6_rps_idle(struct drm_i915_private *dev_priv);
|
|
void gen6_rps_boost(struct drm_i915_private *dev_priv);
|
|
void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv);
|
|
void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv);
|
|
void intel_runtime_pm_get(struct drm_i915_private *dev_priv);
|
|
void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv);
|
|
void intel_runtime_pm_put(struct drm_i915_private *dev_priv);
|
|
void intel_init_runtime_pm(struct drm_i915_private *dev_priv);
|
|
void intel_fini_runtime_pm(struct drm_i915_private *dev_priv);
|
|
void ilk_wm_get_hw_state(struct drm_device *dev);
|
|
|
|
|
|
/* intel_sdvo.c */
|
|
bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);
|
|
|
|
|
|
/* intel_sprite.c */
|
|
int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
|
|
void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
|
|
enum plane plane);
|
|
void intel_plane_restore(struct drm_plane *plane);
|
|
void intel_plane_disable(struct drm_plane *plane);
|
|
int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int intel_sprite_get_colorkey(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
|
|
|
|
/* intel_tv.c */
|
|
void intel_tv_init(struct drm_device *dev);
|
|
|
|
#endif /* __INTEL_DRV_H__ */
|