linux_dsm_epyc7002/arch/powerpc/include/asm/mmu-8xx.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

224 lines
8.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_POWERPC_MMU_8XX_H_
#define _ASM_POWERPC_MMU_8XX_H_
/*
* PPC8xx support
*/
/* Control/status registers for the MPC8xx.
* A write operation to these registers causes serialized access.
* During software tablewalk, the registers used perform mask/shift-add
* operations when written/read. A TLB entry is created when the Mx_RPN
* is written, and the contents of several registers are used to
* create the entry.
*/
#define SPRN_MI_CTR 784 /* Instruction TLB control register */
#define MI_GPM 0x80000000 /* Set domain manager mode */
#define MI_PPM 0x40000000 /* Set subpage protection */
#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */
#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */
#define MI_RESETVAL 0x00000000 /* Value of register at reset */
/* These are the Ks and Kp from the PowerPC books. For proper operation,
* Ks = 0, Kp = 1.
*/
#define SPRN_MI_AP 786
#define MI_Ks 0x80000000 /* Should not be set */
#define MI_Kp 0x40000000 /* Should always be set */
/*
* All pages' PP exec bits are set to 000, which means Execute for Supervisor
* and no Execute for User.
* Then we use the APG to say whether accesses are according to Page rules,
* "all Supervisor" rules (Exec for all) and "all User" rules (Exec for noone)
* Therefore, we define 4 APG groups. msb is _PAGE_EXEC, lsb is _PAGE_USER
* 0 (00) => Not User, no exec => 11 (all accesses performed as user)
* 1 (01) => User but no exec => 11 (all accesses performed as user)
* 2 (10) => Not User, exec => 01 (rights according to page definition)
* 3 (11) => User, exec => 00 (all accesses performed as supervisor)
*/
#define MI_APG_INIT 0xf4ffffff
/* The effective page number register. When read, contains the information
* about the last instruction TLB miss. When MI_RPN is written, bits in
* this register are used to create the TLB entry.
*/
#define SPRN_MI_EPN 787
#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */
#define MI_EVALID 0x00000200 /* Entry is valid */
#define MI_ASIDMASK 0x0000000f /* ASID match value */
/* Reset value is undefined */
/* A "level 1" or "segment" or whatever you want to call it register.
* For the instruction TLB, it contains bits that get loaded into the
* TLB entry when the MI_RPN is written.
*/
#define SPRN_MI_TWC 789
#define MI_APG 0x000001e0 /* Access protection group (0) */
#define MI_GUARDED 0x00000010 /* Guarded storage */
#define MI_PSMASK 0x0000000c /* Mask of page size bits */
#define MI_PS8MEG 0x0000000c /* 8M page size */
#define MI_PS512K 0x00000004 /* 512K page size */
#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */
#define MI_SVALID 0x00000001 /* Segment entry is valid */
/* Reset value is undefined */
/* Real page number. Defined by the pte. Writing this register
* causes a TLB entry to be created for the instruction TLB, using
* additional information from the MI_EPN, and MI_TWC registers.
*/
#define SPRN_MI_RPN 790
#define MI_SPS16K 0x00000008 /* Small page size (0 = 4k, 1 = 16k) */
/* Define an RPN value for mapping kernel memory to large virtual
* pages for boot initialization. This has real page number of 0,
* large page size, shared page, cache enabled, and valid.
* Also mark all subpages valid and write access.
*/
#define MI_BOOTINIT 0x000001fd
#define SPRN_MD_CTR 792 /* Data TLB control register */
#define MD_GPM 0x80000000 /* Set domain manager mode */
#define MD_PPM 0x40000000 /* Set subpage protection */
#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */
#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */
#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */
#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */
#define MD_RESETVAL 0x04000000 /* Value of register at reset */
#define SPRN_M_CASID 793 /* Address space ID (context) to match */
#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */
/* These are the Ks and Kp from the PowerPC books. For proper operation,
* Ks = 0, Kp = 1.
*/
#define SPRN_MD_AP 794
#define MD_Ks 0x80000000 /* Should not be set */
#define MD_Kp 0x40000000 /* Should always be set */
/*
* All pages' PP data bits are set to either 000 or 011, which means
* respectively RW for Supervisor and no access for User, or RO for
* Supervisor and no access for user.
* Then we use the APG to say whether accesses are according to Page rules or
* "all Supervisor" rules (Access to all)
* Therefore, we define 2 APG groups. lsb is _PAGE_USER
* 0 => No user => 01 (all accesses performed according to page definition)
* 1 => User => 00 (all accesses performed as supervisor
* according to page definition)
*/
#define MD_APG_INIT 0x4fffffff
/* The effective page number register. When read, contains the information
* about the last instruction TLB miss. When MD_RPN is written, bits in
* this register are used to create the TLB entry.
*/
#define SPRN_MD_EPN 795
#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */
#define MD_EVALID 0x00000200 /* Entry is valid */
#define MD_ASIDMASK 0x0000000f /* ASID match value */
/* Reset value is undefined */
/* The pointer to the base address of the first level page table.
* During a software tablewalk, reading this register provides the address
* of the entry associated with MD_EPN.
*/
#define SPRN_M_TWB 796
#define M_L1TB 0xfffff000 /* Level 1 table base address */
#define M_L1INDX 0x00000ffc /* Level 1 index, when read */
/* Reset value is undefined */
/* A "level 1" or "segment" or whatever you want to call it register.
* For the data TLB, it contains bits that get loaded into the TLB entry
* when the MD_RPN is written. It is also provides the hardware assist
* for finding the PTE address during software tablewalk.
*/
#define SPRN_MD_TWC 797
#define MD_L2TB 0xfffff000 /* Level 2 table base address */
#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */
#define MD_APG 0x000001e0 /* Access protection group (0) */
#define MD_GUARDED 0x00000010 /* Guarded storage */
#define MD_PSMASK 0x0000000c /* Mask of page size bits */
#define MD_PS8MEG 0x0000000c /* 8M page size */
#define MD_PS512K 0x00000004 /* 512K page size */
#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */
#define MD_WT 0x00000002 /* Use writethrough page attribute */
#define MD_SVALID 0x00000001 /* Segment entry is valid */
/* Reset value is undefined */
/* Real page number. Defined by the pte. Writing this register
* causes a TLB entry to be created for the data TLB, using
* additional information from the MD_EPN, and MD_TWC registers.
*/
#define SPRN_MD_RPN 798
#define MD_SPS16K 0x00000008 /* Small page size (0 = 4k, 1 = 16k) */
/* This is a temporary storage register that could be used to save
* a processor working register during a tablewalk.
*/
#define SPRN_M_TW 799
#ifndef __ASSEMBLY__
typedef struct {
unsigned int id;
unsigned int active;
unsigned long vdso_base;
} mm_context_t;
#define PHYS_IMMR_BASE (mfspr(SPRN_IMMR) & 0xfff80000)
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
/* Page size definitions, common between 32 and 64-bit
*
* shift : is the "PAGE_SHIFT" value for that page size
* penc : is the pte encoding mask
*
*/
struct mmu_psize_def {
unsigned int shift; /* number of bits */
unsigned int enc; /* PTE encoding */
unsigned int ind; /* Corresponding indirect page size shift */
unsigned int flags;
#define MMU_PAGE_SIZE_DIRECT 0x1 /* Supported as a direct size */
#define MMU_PAGE_SIZE_INDIRECT 0x2 /* Supported as an indirect size */
};
extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
static inline int shift_to_mmu_psize(unsigned int shift)
{
int psize;
for (psize = 0; psize < MMU_PAGE_COUNT; ++psize)
if (mmu_psize_defs[psize].shift == shift)
return psize;
return -1;
}
static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
{
if (mmu_psize_defs[mmu_psize].shift)
return mmu_psize_defs[mmu_psize].shift;
BUG();
}
#endif /* !__ASSEMBLY__ */
#if defined(CONFIG_PPC_4K_PAGES)
#define mmu_virtual_psize MMU_PAGE_4K
#elif defined(CONFIG_PPC_16K_PAGES)
#define mmu_virtual_psize MMU_PAGE_16K
#else
#error "Unsupported PAGE_SIZE"
#endif
#define mmu_linear_psize MMU_PAGE_8M
#endif /* _ASM_POWERPC_MMU_8XX_H_ */