mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 23:46:41 +07:00
991688bfc6
Driver updates for ARM SoCs, including a couple of newly added drivers:
- A new driver for the power management controller on TI Keystone
- Support for the prerelease "SCPI" firmware protocol that ended up
being shipped by Amlogic in their GXBB SoC.
- A soc_device can now be matched using a glob from inside the
kernel, when another driver wants to know the specific chip
it is running on and cannot find out from DT, firmware or hardware.
- Renesas SoCs now support identification through the soc_device
interface, both in user space and kernel.
- Renesas r8a7743 and r8a7745 gain support for their system controller
- A new checking module for the ARM "PSCI" (not to be confused
with "SCPI" mentioned above) firmware interface.
- A new driver for the Tegra GMI memory interface
- Support for the Tegra firmware interfaces with their
power management controllers
As usual, the updates for the reset controller framework are merged
here, as they tend to touch multiple SoCs as well, including a new
driver for the Oxford (now Broadcom) OX820 chip and the Tegra
bpmp interface.
The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
Rockchips SoCs see some further updates.
Conflicts:
- ARCH_RENESAS now selects SOC_BUS, but no longer needs GPIOLIB
- drivers/soc/renesas/Makefile: multiple files got added, keep
all in logical sorting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6dP8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Driver updates for ARM SoCs, including a couple of newly added
drivers:
- A new driver for the power management controller on TI Keystone
- Support for the prerelease "SCPI" firmware protocol that ended up
being shipped by Amlogic in their GXBB SoC.
- A soc_device can now be matched using a glob from inside the
kernel, when another driver wants to know the specific chip it is
running on and cannot find out from DT, firmware or hardware.
- Renesas SoCs now support identification through the soc_device
interface, both in user space and kernel.
- Renesas r8a7743 and r8a7745 gain support for their system
controller
- A new checking module for the ARM "PSCI" (not to be confused with
"SCPI" mentioned above) firmware interface.
- A new driver for the Tegra GMI memory interface
- Support for the Tegra firmware interfaces with their power
management controllers
As usual, the updates for the reset controller framework are merged
here, as they tend to touch multiple SoCs as well, including a new
driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
interface.
The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
Rockchips SoCs see some further updates"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
misc: sram: remove useless #ifdef
drivers: psci: Allow PSCI node to be disabled
drivers: psci: PSCI checker module
soc: renesas: Identify SoC and register with the SoC bus
firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
firmware: qcom: scm: Remove core, iface and bus clocks dependency
dt-bindings: firmware: scm: Add MSM8996 DT bindings
memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
ARM: shmobile: Document DT bindings for Product Register
soc: renesas: rcar-sysc: add R8A7745 support
reset: Add Tegra BPMP reset driver
dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
dt-bindings: Add power domains to Tegra BPMP firmware
firmware: tegra: Add BPMP support
firmware: tegra: Add IVC library
dt-bindings: firmware: Add bindings for Tegra BPMP
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
mailbox: Add Tegra HSP driver
firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
...
187 lines
5.4 KiB
Plaintext
187 lines
5.4 KiB
Plaintext
#
|
|
# Bus Devices
|
|
#
|
|
|
|
menu "Bus devices"
|
|
|
|
config ARM_CCI
|
|
bool
|
|
|
|
config ARM_CCI_PMU
|
|
bool
|
|
select ARM_CCI
|
|
|
|
config ARM_CCI400_COMMON
|
|
bool
|
|
select ARM_CCI
|
|
|
|
config ARM_CCI400_PMU
|
|
bool "ARM CCI400 PMU support"
|
|
depends on (ARM && CPU_V7) || ARM64
|
|
depends on PERF_EVENTS
|
|
select ARM_CCI400_COMMON
|
|
select ARM_CCI_PMU
|
|
help
|
|
Support for PMU events monitoring on the ARM CCI-400 (cache coherent
|
|
interconnect). CCI-400 supports counting events related to the
|
|
connected slave/master interfaces.
|
|
|
|
config ARM_CCI400_PORT_CTRL
|
|
bool
|
|
depends on ARM && OF && CPU_V7
|
|
select ARM_CCI400_COMMON
|
|
help
|
|
Low level power management driver for CCI400 cache coherent
|
|
interconnect for ARM platforms.
|
|
|
|
config ARM_CCI5xx_PMU
|
|
bool "ARM CCI-500/CCI-550 PMU support"
|
|
depends on (ARM && CPU_V7) || ARM64
|
|
depends on PERF_EVENTS
|
|
select ARM_CCI_PMU
|
|
help
|
|
Support for PMU events monitoring on the ARM CCI-500/CCI-550 cache
|
|
coherent interconnects. Both of them provide 8 independent event counters,
|
|
which can count events pertaining to the slave/master interfaces as well
|
|
as the internal events to the CCI.
|
|
|
|
If unsure, say Y
|
|
|
|
config ARM_CCN
|
|
tristate "ARM CCN driver support"
|
|
depends on ARM || ARM64
|
|
depends on PERF_EVENTS
|
|
help
|
|
PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
|
|
interconnect.
|
|
|
|
config BRCMSTB_GISB_ARB
|
|
bool "Broadcom STB GISB bus arbiter"
|
|
depends on ARM || MIPS
|
|
default ARCH_BRCMSTB || BMIPS_GENERIC
|
|
help
|
|
Driver for the Broadcom Set Top Box System-on-a-chip internal bus
|
|
arbiter. This driver provides timeout and target abort error handling
|
|
and internal bus master decoding.
|
|
|
|
config IMX_WEIM
|
|
bool "Freescale EIM DRIVER"
|
|
depends on ARCH_MXC
|
|
help
|
|
Driver for i.MX WEIM controller.
|
|
The WEIM(Wireless External Interface Module) works like a bus.
|
|
You can attach many different devices on it, such as NOR, onenand.
|
|
|
|
config MIPS_CDMM
|
|
bool "MIPS Common Device Memory Map (CDMM) Driver"
|
|
depends on CPU_MIPSR2
|
|
help
|
|
Driver needed for the MIPS Common Device Memory Map bus in MIPS
|
|
cores. This bus is for per-CPU tightly coupled devices such as the
|
|
Fast Debug Channel (FDC).
|
|
|
|
For this to work, either your bootloader needs to enable the CDMM
|
|
region at an unused physical address on the boot CPU, or else your
|
|
platform code needs to implement mips_cdmm_phys_base() (see
|
|
asm/cdmm.h).
|
|
|
|
config MVEBU_MBUS
|
|
bool
|
|
depends on PLAT_ORION
|
|
help
|
|
Driver needed for the MBus configuration on Marvell EBU SoCs
|
|
(Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
|
|
|
|
config OMAP_INTERCONNECT
|
|
tristate "OMAP INTERCONNECT DRIVER"
|
|
depends on ARCH_OMAP2PLUS
|
|
|
|
help
|
|
Driver to enable OMAP interconnect error handling driver.
|
|
|
|
config OMAP_OCP2SCP
|
|
tristate "OMAP OCP2SCP DRIVER"
|
|
depends on ARCH_OMAP2PLUS
|
|
help
|
|
Driver to enable ocp2scp module which transforms ocp interface
|
|
protocol to scp protocol. In OMAP4, USB PHY is connected via
|
|
OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
|
|
OCP2SCP.
|
|
|
|
config QCOM_EBI2
|
|
bool "Qualcomm External Bus Interface 2 (EBI2)"
|
|
depends on HAS_IOMEM
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
help
|
|
Say y here to enable support for the Qualcomm External Bus
|
|
Interface 2, which can be used to connect things like NAND Flash,
|
|
SRAM, ethernet adapters, FPGAs and LCD displays.
|
|
|
|
config SIMPLE_PM_BUS
|
|
bool "Simple Power-Managed Bus Driver"
|
|
depends on OF && PM
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
help
|
|
Driver for transparent busses that don't need a real driver, but
|
|
where the bus controller is part of a PM domain, or under the control
|
|
of a functional clock, and thus relies on runtime PM for managing
|
|
this PM domain and/or clock.
|
|
An example of such a bus controller is the Renesas Bus State
|
|
Controller (BSC, sometimes called "LBSC within Bus Bridge", or
|
|
"External Bus Interface") as found on several Renesas ARM SoCs.
|
|
|
|
config SUNXI_RSB
|
|
tristate "Allwinner sunXi Reduced Serial Bus Driver"
|
|
default MACH_SUN8I || MACH_SUN9I
|
|
depends on ARCH_SUNXI
|
|
select REGMAP
|
|
help
|
|
Say y here to enable support for Allwinner's Reduced Serial Bus
|
|
(RSB) support. This controller is responsible for communicating
|
|
with various RSB based devices, such as AXP223, AXP8XX PMICs,
|
|
and AC100/AC200 ICs.
|
|
|
|
config TEGRA_ACONNECT
|
|
tristate "Tegra ACONNECT Bus Driver"
|
|
depends on ARCH_TEGRA_210_SOC
|
|
depends on OF && PM
|
|
select PM_CLK
|
|
help
|
|
Driver for the Tegra ACONNECT bus which is used to interface with
|
|
the devices inside the Audio Processing Engine (APE) for Tegra210.
|
|
|
|
config TEGRA_GMI
|
|
tristate "Tegra Generic Memory Interface bus driver"
|
|
depends on ARCH_TEGRA
|
|
help
|
|
Driver for the Tegra Generic Memory Interface bus which can be used
|
|
to attach devices such as NOR, UART, FPGA and more.
|
|
|
|
config UNIPHIER_SYSTEM_BUS
|
|
tristate "UniPhier System Bus driver"
|
|
depends on ARCH_UNIPHIER && OF
|
|
default y
|
|
help
|
|
Support for UniPhier System Bus, a simple external bus. This is
|
|
needed to use on-board devices connected to UniPhier SoCs.
|
|
|
|
config VEXPRESS_CONFIG
|
|
bool "Versatile Express configuration bus"
|
|
default y if ARCH_VEXPRESS
|
|
depends on ARM || ARM64
|
|
depends on OF
|
|
select REGMAP
|
|
help
|
|
Platform configuration infrastructure for the ARM Ltd.
|
|
Versatile Express.
|
|
|
|
config DA8XX_MSTPRI
|
|
bool "TI da8xx master peripheral priority driver"
|
|
depends on ARCH_DAVINCI_DA8XX
|
|
help
|
|
Driver for Texas Instruments da8xx master peripheral priority
|
|
configuration. Allows to adjust the priorities of all master
|
|
peripherals.
|
|
|
|
endmenu
|