mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 16:46:41 +07:00
e4745fef55
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
484 lines
12 KiB
C
484 lines
12 KiB
C
/*
|
|
* Copyright (C) 2012 - 2014 Allwinner Tech
|
|
* Pan Nan <pannan@allwinnertech.com>
|
|
*
|
|
* Copyright (C) 2014 Maxime Ripard
|
|
* Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reset.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
|
|
#define SUN6I_FIFO_DEPTH 128
|
|
|
|
#define SUN6I_GBL_CTL_REG 0x04
|
|
#define SUN6I_GBL_CTL_BUS_ENABLE BIT(0)
|
|
#define SUN6I_GBL_CTL_MASTER BIT(1)
|
|
#define SUN6I_GBL_CTL_TP BIT(7)
|
|
#define SUN6I_GBL_CTL_RST BIT(31)
|
|
|
|
#define SUN6I_TFR_CTL_REG 0x08
|
|
#define SUN6I_TFR_CTL_CPHA BIT(0)
|
|
#define SUN6I_TFR_CTL_CPOL BIT(1)
|
|
#define SUN6I_TFR_CTL_SPOL BIT(2)
|
|
#define SUN6I_TFR_CTL_CS_MASK 0x30
|
|
#define SUN6I_TFR_CTL_CS(cs) (((cs) << 4) & SUN6I_TFR_CTL_CS_MASK)
|
|
#define SUN6I_TFR_CTL_CS_MANUAL BIT(6)
|
|
#define SUN6I_TFR_CTL_CS_LEVEL BIT(7)
|
|
#define SUN6I_TFR_CTL_DHB BIT(8)
|
|
#define SUN6I_TFR_CTL_FBS BIT(12)
|
|
#define SUN6I_TFR_CTL_XCH BIT(31)
|
|
|
|
#define SUN6I_INT_CTL_REG 0x10
|
|
#define SUN6I_INT_CTL_RF_OVF BIT(8)
|
|
#define SUN6I_INT_CTL_TC BIT(12)
|
|
|
|
#define SUN6I_INT_STA_REG 0x14
|
|
|
|
#define SUN6I_FIFO_CTL_REG 0x18
|
|
#define SUN6I_FIFO_CTL_RF_RST BIT(15)
|
|
#define SUN6I_FIFO_CTL_TF_RST BIT(31)
|
|
|
|
#define SUN6I_FIFO_STA_REG 0x1c
|
|
#define SUN6I_FIFO_STA_RF_CNT_MASK 0x7f
|
|
#define SUN6I_FIFO_STA_RF_CNT_BITS 0
|
|
#define SUN6I_FIFO_STA_TF_CNT_MASK 0x7f
|
|
#define SUN6I_FIFO_STA_TF_CNT_BITS 16
|
|
|
|
#define SUN6I_CLK_CTL_REG 0x24
|
|
#define SUN6I_CLK_CTL_CDR2_MASK 0xff
|
|
#define SUN6I_CLK_CTL_CDR2(div) (((div) & SUN6I_CLK_CTL_CDR2_MASK) << 0)
|
|
#define SUN6I_CLK_CTL_CDR1_MASK 0xf
|
|
#define SUN6I_CLK_CTL_CDR1(div) (((div) & SUN6I_CLK_CTL_CDR1_MASK) << 8)
|
|
#define SUN6I_CLK_CTL_DRS BIT(12)
|
|
|
|
#define SUN6I_BURST_CNT_REG 0x30
|
|
#define SUN6I_BURST_CNT(cnt) ((cnt) & 0xffffff)
|
|
|
|
#define SUN6I_XMIT_CNT_REG 0x34
|
|
#define SUN6I_XMIT_CNT(cnt) ((cnt) & 0xffffff)
|
|
|
|
#define SUN6I_BURST_CTL_CNT_REG 0x38
|
|
#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & 0xffffff)
|
|
|
|
#define SUN6I_TXDATA_REG 0x200
|
|
#define SUN6I_RXDATA_REG 0x300
|
|
|
|
struct sun6i_spi {
|
|
struct spi_master *master;
|
|
void __iomem *base_addr;
|
|
struct clk *hclk;
|
|
struct clk *mclk;
|
|
struct reset_control *rstc;
|
|
|
|
struct completion done;
|
|
|
|
const u8 *tx_buf;
|
|
u8 *rx_buf;
|
|
int len;
|
|
};
|
|
|
|
static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
|
|
{
|
|
return readl(sspi->base_addr + reg);
|
|
}
|
|
|
|
static inline void sun6i_spi_write(struct sun6i_spi *sspi, u32 reg, u32 value)
|
|
{
|
|
writel(value, sspi->base_addr + reg);
|
|
}
|
|
|
|
static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len)
|
|
{
|
|
u32 reg, cnt;
|
|
u8 byte;
|
|
|
|
/* See how much data is available */
|
|
reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG);
|
|
reg &= SUN6I_FIFO_STA_RF_CNT_MASK;
|
|
cnt = reg >> SUN6I_FIFO_STA_RF_CNT_BITS;
|
|
|
|
if (len > cnt)
|
|
len = cnt;
|
|
|
|
while (len--) {
|
|
byte = readb(sspi->base_addr + SUN6I_RXDATA_REG);
|
|
if (sspi->rx_buf)
|
|
*sspi->rx_buf++ = byte;
|
|
}
|
|
}
|
|
|
|
static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len)
|
|
{
|
|
u8 byte;
|
|
|
|
if (len > sspi->len)
|
|
len = sspi->len;
|
|
|
|
while (len--) {
|
|
byte = sspi->tx_buf ? *sspi->tx_buf++ : 0;
|
|
writeb(byte, sspi->base_addr + SUN6I_TXDATA_REG);
|
|
sspi->len--;
|
|
}
|
|
}
|
|
|
|
static void sun6i_spi_set_cs(struct spi_device *spi, bool enable)
|
|
{
|
|
struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);
|
|
u32 reg;
|
|
|
|
reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
|
|
reg &= ~SUN6I_TFR_CTL_CS_MASK;
|
|
reg |= SUN6I_TFR_CTL_CS(spi->chip_select);
|
|
|
|
if (enable)
|
|
reg |= SUN6I_TFR_CTL_CS_LEVEL;
|
|
else
|
|
reg &= ~SUN6I_TFR_CTL_CS_LEVEL;
|
|
|
|
sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
|
|
}
|
|
|
|
|
|
static int sun6i_spi_transfer_one(struct spi_master *master,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *tfr)
|
|
{
|
|
struct sun6i_spi *sspi = spi_master_get_devdata(master);
|
|
unsigned int mclk_rate, div, timeout;
|
|
unsigned int tx_len = 0;
|
|
int ret = 0;
|
|
u32 reg;
|
|
|
|
/* We don't support transfer larger than the FIFO */
|
|
if (tfr->len > SUN6I_FIFO_DEPTH)
|
|
return -EINVAL;
|
|
|
|
reinit_completion(&sspi->done);
|
|
sspi->tx_buf = tfr->tx_buf;
|
|
sspi->rx_buf = tfr->rx_buf;
|
|
sspi->len = tfr->len;
|
|
|
|
/* Clear pending interrupts */
|
|
sun6i_spi_write(sspi, SUN6I_INT_STA_REG, ~0);
|
|
|
|
/* Reset FIFO */
|
|
sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG,
|
|
SUN6I_FIFO_CTL_RF_RST | SUN6I_FIFO_CTL_TF_RST);
|
|
|
|
/*
|
|
* Setup the transfer control register: Chip Select,
|
|
* polarities, etc.
|
|
*/
|
|
reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
|
|
|
|
if (spi->mode & SPI_CPOL)
|
|
reg |= SUN6I_TFR_CTL_CPOL;
|
|
else
|
|
reg &= ~SUN6I_TFR_CTL_CPOL;
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
reg |= SUN6I_TFR_CTL_CPHA;
|
|
else
|
|
reg &= ~SUN6I_TFR_CTL_CPHA;
|
|
|
|
if (spi->mode & SPI_LSB_FIRST)
|
|
reg |= SUN6I_TFR_CTL_FBS;
|
|
else
|
|
reg &= ~SUN6I_TFR_CTL_FBS;
|
|
|
|
/*
|
|
* If it's a TX only transfer, we don't want to fill the RX
|
|
* FIFO with bogus data
|
|
*/
|
|
if (sspi->rx_buf)
|
|
reg &= ~SUN6I_TFR_CTL_DHB;
|
|
else
|
|
reg |= SUN6I_TFR_CTL_DHB;
|
|
|
|
/* We want to control the chip select manually */
|
|
reg |= SUN6I_TFR_CTL_CS_MANUAL;
|
|
|
|
sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
|
|
|
|
/* Ensure that we have a parent clock fast enough */
|
|
mclk_rate = clk_get_rate(sspi->mclk);
|
|
if (mclk_rate < (2 * spi->max_speed_hz)) {
|
|
clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
|
|
mclk_rate = clk_get_rate(sspi->mclk);
|
|
}
|
|
|
|
/*
|
|
* Setup clock divider.
|
|
*
|
|
* We have two choices there. Either we can use the clock
|
|
* divide rate 1, which is calculated thanks to this formula:
|
|
* SPI_CLK = MOD_CLK / (2 ^ cdr)
|
|
* Or we can use CDR2, which is calculated with the formula:
|
|
* SPI_CLK = MOD_CLK / (2 * (cdr + 1))
|
|
* Wether we use the former or the latter is set through the
|
|
* DRS bit.
|
|
*
|
|
* First try CDR2, and if we can't reach the expected
|
|
* frequency, fall back to CDR1.
|
|
*/
|
|
div = mclk_rate / (2 * spi->max_speed_hz);
|
|
if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
|
|
if (div > 0)
|
|
div--;
|
|
|
|
reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
|
|
} else {
|
|
div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
|
|
reg = SUN6I_CLK_CTL_CDR1(div);
|
|
}
|
|
|
|
sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
|
|
|
|
/* Setup the transfer now... */
|
|
if (sspi->tx_buf)
|
|
tx_len = tfr->len;
|
|
|
|
/* Setup the counters */
|
|
sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len));
|
|
sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len));
|
|
sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG,
|
|
SUN6I_BURST_CTL_CNT_STC(tx_len));
|
|
|
|
/* Fill the TX FIFO */
|
|
sun6i_spi_fill_fifo(sspi, SUN6I_FIFO_DEPTH);
|
|
|
|
/* Enable the interrupts */
|
|
sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC);
|
|
|
|
/* Start the transfer */
|
|
reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
|
|
sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH);
|
|
|
|
timeout = wait_for_completion_timeout(&sspi->done,
|
|
msecs_to_jiffies(1000));
|
|
if (!timeout) {
|
|
ret = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
|
|
sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH);
|
|
|
|
out:
|
|
sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
|
|
{
|
|
struct sun6i_spi *sspi = dev_id;
|
|
u32 status = sun6i_spi_read(sspi, SUN6I_INT_STA_REG);
|
|
|
|
/* Transfer complete */
|
|
if (status & SUN6I_INT_CTL_TC) {
|
|
sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC);
|
|
complete(&sspi->done);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int sun6i_spi_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct sun6i_spi *sspi = spi_master_get_devdata(master);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(sspi->hclk);
|
|
if (ret) {
|
|
dev_err(dev, "Couldn't enable AHB clock\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = clk_prepare_enable(sspi->mclk);
|
|
if (ret) {
|
|
dev_err(dev, "Couldn't enable module clock\n");
|
|
goto err;
|
|
}
|
|
|
|
ret = reset_control_deassert(sspi->rstc);
|
|
if (ret) {
|
|
dev_err(dev, "Couldn't deassert the device from reset\n");
|
|
goto err2;
|
|
}
|
|
|
|
sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG,
|
|
SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
clk_disable_unprepare(sspi->mclk);
|
|
err:
|
|
clk_disable_unprepare(sspi->hclk);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int sun6i_spi_runtime_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct sun6i_spi *sspi = spi_master_get_devdata(master);
|
|
|
|
reset_control_assert(sspi->rstc);
|
|
clk_disable_unprepare(sspi->mclk);
|
|
clk_disable_unprepare(sspi->hclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master;
|
|
struct sun6i_spi *sspi;
|
|
struct resource *res;
|
|
int ret = 0, irq;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(struct sun6i_spi));
|
|
if (!master) {
|
|
dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, master);
|
|
sspi = spi_master_get_devdata(master);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
sspi->base_addr = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(sspi->base_addr)) {
|
|
ret = PTR_ERR(sspi->base_addr);
|
|
goto err_free_master;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "No spi IRQ specified\n");
|
|
ret = -ENXIO;
|
|
goto err_free_master;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, sun6i_spi_handler,
|
|
0, "sun6i-spi", sspi);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Cannot request IRQ\n");
|
|
goto err_free_master;
|
|
}
|
|
|
|
sspi->master = master;
|
|
master->set_cs = sun6i_spi_set_cs;
|
|
master->transfer_one = sun6i_spi_transfer_one;
|
|
master->num_chipselect = 4;
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8);
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
master->auto_runtime_pm = true;
|
|
|
|
sspi->hclk = devm_clk_get(&pdev->dev, "ahb");
|
|
if (IS_ERR(sspi->hclk)) {
|
|
dev_err(&pdev->dev, "Unable to acquire AHB clock\n");
|
|
ret = PTR_ERR(sspi->hclk);
|
|
goto err_free_master;
|
|
}
|
|
|
|
sspi->mclk = devm_clk_get(&pdev->dev, "mod");
|
|
if (IS_ERR(sspi->mclk)) {
|
|
dev_err(&pdev->dev, "Unable to acquire module clock\n");
|
|
ret = PTR_ERR(sspi->mclk);
|
|
goto err_free_master;
|
|
}
|
|
|
|
init_completion(&sspi->done);
|
|
|
|
sspi->rstc = devm_reset_control_get(&pdev->dev, NULL);
|
|
if (IS_ERR(sspi->rstc)) {
|
|
dev_err(&pdev->dev, "Couldn't get reset controller\n");
|
|
ret = PTR_ERR(sspi->rstc);
|
|
goto err_free_master;
|
|
}
|
|
|
|
/*
|
|
* This wake-up/shutdown pattern is to be able to have the
|
|
* device woken up, even if runtime_pm is disabled
|
|
*/
|
|
ret = sun6i_spi_runtime_resume(&pdev->dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't resume the device\n");
|
|
goto err_free_master;
|
|
}
|
|
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
pm_runtime_idle(&pdev->dev);
|
|
|
|
ret = devm_spi_register_master(&pdev->dev, master);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "cannot register SPI master\n");
|
|
goto err_pm_disable;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_pm_disable:
|
|
pm_runtime_disable(&pdev->dev);
|
|
sun6i_spi_runtime_suspend(&pdev->dev);
|
|
err_free_master:
|
|
spi_master_put(master);
|
|
return ret;
|
|
}
|
|
|
|
static int sun6i_spi_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sun6i_spi_match[] = {
|
|
{ .compatible = "allwinner,sun6i-a31-spi", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sun6i_spi_match);
|
|
|
|
static const struct dev_pm_ops sun6i_spi_pm_ops = {
|
|
.runtime_resume = sun6i_spi_runtime_resume,
|
|
.runtime_suspend = sun6i_spi_runtime_suspend,
|
|
};
|
|
|
|
static struct platform_driver sun6i_spi_driver = {
|
|
.probe = sun6i_spi_probe,
|
|
.remove = sun6i_spi_remove,
|
|
.driver = {
|
|
.name = "sun6i-spi",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = sun6i_spi_match,
|
|
.pm = &sun6i_spi_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(sun6i_spi_driver);
|
|
|
|
MODULE_AUTHOR("Pan Nan <pannan@allwinnertech.com>");
|
|
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Allwinner A31 SPI controller driver");
|
|
MODULE_LICENSE("GPL");
|