mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 02:40:54 +07:00
0ba379ec0f
There is a very old quirk for the intel E7502 E7320 and E7525 memory controller hubs that disables usage of msi interrupts on pcie hotplug bridges of those devices, and disables changing the affinity of irqs. Today all we have to do to disable msi on a specific device is to set dev->no_msi, which is much more straightforward than the previous logic. The re-running of this fixup after pci hotplug happens below these devices is totally bogus. All of the state we change is pure software state and we don't change the hardware at all. Which means hotplug on the lower devices doesn't have a chance to change this state. So we can safely remove the special case from the pciehp driver and the pcie portdriver. I suspect the special case was someone's expermental debug code that slipped in. Certainly it isn't mentioned in commit 6fb8880a61510295aece04a542767161f624dffe aka BKrev: 41966101LJ_ogfOU0m2aE6teZfQnuQ where the code first appears. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
291 lines
8.2 KiB
C
291 lines
8.2 KiB
C
/*
|
|
* PCI Express Hot Plug Controller Driver
|
|
*
|
|
* Copyright (C) 1995,2001 Compaq Computer Corporation
|
|
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2001 IBM Corp.
|
|
* Copyright (C) 2003-2004 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include "../pci.h"
|
|
#include "pciehp.h"
|
|
|
|
static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
|
|
{
|
|
u16 pci_cmd, pci_bctl;
|
|
|
|
if (hpp->revision > 1) {
|
|
warn("Rev.%d type0 record not supported\n", hpp->revision);
|
|
return;
|
|
}
|
|
|
|
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
|
|
pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
|
|
if (hpp->enable_serr)
|
|
pci_cmd |= PCI_COMMAND_SERR;
|
|
else
|
|
pci_cmd &= ~PCI_COMMAND_SERR;
|
|
if (hpp->enable_perr)
|
|
pci_cmd |= PCI_COMMAND_PARITY;
|
|
else
|
|
pci_cmd &= ~PCI_COMMAND_PARITY;
|
|
pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
|
|
|
|
/* Program bridge control value */
|
|
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
|
|
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
|
|
hpp->latency_timer);
|
|
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
|
|
if (hpp->enable_serr)
|
|
pci_bctl |= PCI_BRIDGE_CTL_SERR;
|
|
else
|
|
pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
|
|
if (hpp->enable_perr)
|
|
pci_bctl |= PCI_BRIDGE_CTL_PARITY;
|
|
else
|
|
pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
|
|
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
|
|
}
|
|
}
|
|
|
|
static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
|
|
{
|
|
int pos;
|
|
u16 reg16;
|
|
u32 reg32;
|
|
|
|
if (hpp->revision > 1) {
|
|
warn("Rev.%d type2 record not supported\n", hpp->revision);
|
|
return;
|
|
}
|
|
|
|
/* Find PCI Express capability */
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
|
if (!pos)
|
|
return;
|
|
|
|
/* Initialize Device Control Register */
|
|
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, ®16);
|
|
reg16 = (reg16 & hpp->pci_exp_devctl_and) | hpp->pci_exp_devctl_or;
|
|
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);
|
|
|
|
/* Initialize Link Control Register */
|
|
if (dev->subordinate) {
|
|
pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, ®16);
|
|
reg16 = (reg16 & hpp->pci_exp_lnkctl_and)
|
|
| hpp->pci_exp_lnkctl_or;
|
|
pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16);
|
|
}
|
|
|
|
/* Find Advanced Error Reporting Enhanced Capability */
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (!pos)
|
|
return;
|
|
|
|
/* Initialize Uncorrectable Error Mask Register */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, ®32);
|
|
reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
|
|
|
|
/* Initialize Uncorrectable Error Severity Register */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, ®32);
|
|
reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
|
|
|
|
/* Initialize Correctable Error Mask Register */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®32);
|
|
reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
|
|
|
|
/* Initialize Advanced Error Capabilities and Control Register */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32);
|
|
reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
|
|
|
|
/*
|
|
* FIXME: The following two registers are not supported yet.
|
|
*
|
|
* o Secondary Uncorrectable Error Severity Register
|
|
* o Secondary Uncorrectable Error Mask Register
|
|
*/
|
|
}
|
|
|
|
static void program_fw_provided_values(struct pci_dev *dev)
|
|
{
|
|
struct pci_dev *cdev;
|
|
struct hotplug_params hpp;
|
|
|
|
/* Program hpp values for this device */
|
|
if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
|
|
(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
|
|
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
|
|
return;
|
|
|
|
if (pciehp_get_hp_params_from_firmware(dev, &hpp)) {
|
|
warn("Could not get hotplug parameters\n");
|
|
return;
|
|
}
|
|
|
|
if (hpp.t2)
|
|
program_hpp_type2(dev, hpp.t2);
|
|
if (hpp.t0)
|
|
program_hpp_type0(dev, hpp.t0);
|
|
|
|
/* Program child devices */
|
|
if (dev->subordinate) {
|
|
list_for_each_entry(cdev, &dev->subordinate->devices,
|
|
bus_list)
|
|
program_fw_provided_values(cdev);
|
|
}
|
|
}
|
|
|
|
static int __ref pciehp_add_bridge(struct pci_dev *dev)
|
|
{
|
|
struct pci_bus *parent = dev->bus;
|
|
int pass, busnr, start = parent->secondary;
|
|
int end = parent->subordinate;
|
|
|
|
for (busnr = start; busnr <= end; busnr++) {
|
|
if (!pci_find_bus(pci_domain_nr(parent), busnr))
|
|
break;
|
|
}
|
|
if (busnr-- > end) {
|
|
err("No bus number available for hot-added bridge %s\n",
|
|
pci_name(dev));
|
|
return -1;
|
|
}
|
|
for (pass = 0; pass < 2; pass++)
|
|
busnr = pci_scan_bridge(parent, dev, busnr, pass);
|
|
if (!dev->subordinate)
|
|
return -1;
|
|
pci_bus_size_bridges(dev->subordinate);
|
|
pci_bus_assign_resources(parent);
|
|
pci_enable_bridges(parent);
|
|
pci_bus_add_devices(parent);
|
|
return 0;
|
|
}
|
|
|
|
int pciehp_configure_device(struct slot *p_slot)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
|
|
int num, fn;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
|
|
if (dev) {
|
|
ctrl_err(ctrl, "Device %s already exists "
|
|
"at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
|
|
pci_domain_nr(parent), p_slot->bus, p_slot->device);
|
|
pci_dev_put(dev);
|
|
return -EINVAL;
|
|
}
|
|
|
|
num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
|
|
if (num == 0) {
|
|
ctrl_err(ctrl, "No new device found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (fn = 0; fn < 8; fn++) {
|
|
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
|
|
if (!dev)
|
|
continue;
|
|
if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
|
|
ctrl_err(ctrl, "Cannot hot-add display device %s\n",
|
|
pci_name(dev));
|
|
pci_dev_put(dev);
|
|
continue;
|
|
}
|
|
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
|
|
(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
|
|
pciehp_add_bridge(dev);
|
|
}
|
|
program_fw_provided_values(dev);
|
|
pci_dev_put(dev);
|
|
}
|
|
|
|
pci_bus_assign_resources(parent);
|
|
pci_bus_add_devices(parent);
|
|
return 0;
|
|
}
|
|
|
|
int pciehp_unconfigure_device(struct slot *p_slot)
|
|
{
|
|
int ret, rc = 0;
|
|
int j;
|
|
u8 bctl = 0;
|
|
u8 presence = 0;
|
|
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
|
|
u16 command;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
|
|
__func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
|
|
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence);
|
|
if (ret)
|
|
presence = 0;
|
|
|
|
for (j = 0; j < 8; j++) {
|
|
struct pci_dev* temp = pci_get_slot(parent,
|
|
(p_slot->device << 3) | j);
|
|
if (!temp)
|
|
continue;
|
|
if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
|
|
ctrl_err(ctrl, "Cannot remove display device %s\n",
|
|
pci_name(temp));
|
|
pci_dev_put(temp);
|
|
continue;
|
|
}
|
|
if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
|
|
pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
|
|
if (bctl & PCI_BRIDGE_CTL_VGA) {
|
|
ctrl_err(ctrl,
|
|
"Cannot remove display device %s\n",
|
|
pci_name(temp));
|
|
pci_dev_put(temp);
|
|
continue;
|
|
}
|
|
}
|
|
pci_remove_bus_device(temp);
|
|
/*
|
|
* Ensure that no new Requests will be generated from
|
|
* the device.
|
|
*/
|
|
if (presence) {
|
|
pci_read_config_word(temp, PCI_COMMAND, &command);
|
|
command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
|
|
command |= PCI_COMMAND_INTX_DISABLE;
|
|
pci_write_config_word(temp, PCI_COMMAND, command);
|
|
}
|
|
pci_dev_put(temp);
|
|
}
|
|
|
|
return rc;
|
|
}
|