linux_dsm_epyc7002/drivers/parisc/asp.c
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00

127 lines
3.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* ASP Device Driver
*
* (c) Copyright 2000 The Puffin Group Inc.
*
* by Helge Deller <deller@gmx.de>
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/types.h>
#include <asm/io.h>
#include <asm/led.h>
#include "gsc.h"
#define ASP_GSC_IRQ 3 /* hardcoded interrupt for GSC */
#define ASP_VER_OFFSET 0x20 /* offset of ASP version */
#define ASP_LED_ADDR 0xf0800020
#define VIPER_INT_WORD 0xFFFBF088 /* addr of viper interrupt word */
static struct gsc_asic asp;
static void asp_choose_irq(struct parisc_device *dev, void *ctrl)
{
int irq;
switch (dev->id.sversion) {
case 0x71: irq = 9; break; /* SCSI */
case 0x72: irq = 8; break; /* LAN */
case 0x73: irq = 1; break; /* HIL */
case 0x74: irq = 7; break; /* Centronics */
case 0x75: irq = (dev->hw_path == 4) ? 5 : 6; break; /* RS232 */
case 0x76: irq = 10; break; /* EISA BA */
case 0x77: irq = 11; break; /* Graphics1 */
case 0x7a: irq = 13; break; /* Audio (Bushmaster) */
case 0x7b: irq = 13; break; /* Audio (Scorpio) */
case 0x7c: irq = 3; break; /* FW SCSI */
case 0x7d: irq = 4; break; /* FDDI */
case 0x7f: irq = 13; break; /* Audio (Outfield) */
default: return; /* Unknown */
}
gsc_asic_assign_irq(ctrl, irq, &dev->irq);
switch (dev->id.sversion) {
case 0x73: irq = 2; break; /* i8042 High-priority */
case 0x76: irq = 0; break; /* EISA BA */
default: return; /* Other */
}
gsc_asic_assign_irq(ctrl, irq, &dev->aux_irq);
}
/* There are two register ranges we're interested in. Interrupt /
* Status / LED are at 0xf080xxxx and Asp special registers are at
* 0xf082fxxx. PDC only tells us that Asp is at 0xf082f000, so for
* the purposes of interrupt handling, we have to tell other bits of
* the kernel to look at the other registers.
*/
#define ASP_INTERRUPT_ADDR 0xf0800000
static int __init asp_init_chip(struct parisc_device *dev)
{
struct gsc_irq gsc_irq;
int ret;
asp.version = gsc_readb(dev->hpa.start + ASP_VER_OFFSET) & 0xf;
asp.name = (asp.version == 1) ? "Asp" : "Cutoff";
asp.hpa = ASP_INTERRUPT_ADDR;
printk(KERN_INFO "%s version %d at 0x%lx found.\n",
asp.name, asp.version, (unsigned long)dev->hpa.start);
/* the IRQ ASP should use */
ret = -EBUSY;
dev->irq = gsc_claim_irq(&gsc_irq, ASP_GSC_IRQ);
if (dev->irq < 0) {
printk(KERN_ERR "%s(): cannot get GSC irq\n", __func__);
goto out;
}
asp.eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;
ret = request_irq(gsc_irq.irq, gsc_asic_intr, 0, "asp", &asp);
if (ret < 0)
goto out;
/* Program VIPER to interrupt on the ASP irq */
gsc_writel((1 << (31 - ASP_GSC_IRQ)),VIPER_INT_WORD);
/* Done init'ing, register this driver */
ret = gsc_common_setup(dev, &asp);
if (ret)
goto out;
gsc_fixup_irqs(dev, &asp, asp_choose_irq);
/* Mongoose is a sibling of Asp, not a child... */
gsc_fixup_irqs(parisc_parent(dev), &asp, asp_choose_irq);
/* initialize the chassis LEDs */
#ifdef CONFIG_CHASSIS_LCD_LED
register_led_driver(DISPLAY_MODEL_OLD_ASP, LED_CMD_REG_NONE,
ASP_LED_ADDR);
#endif
out:
return ret;
}
static const struct parisc_device_id asp_tbl[] __initconst = {
{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00070 },
{ 0, }
};
struct parisc_driver asp_driver __refdata = {
.name = "asp",
.id_table = asp_tbl,
.probe = asp_init_chip,
};